14 best delphi fuel pumps

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Part is validated, tested and matched to the right vehicle application
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	will this fit and match electrical connections on a 2012 honda civic
Answer:	I would think so, I put it on a 1994 Chevy 6.5 Turbo Diesel
Question:	Will this fit my 1997 Chevy Silverado 5.7 V8 . 2 wheel drive
Answer:	mine came in 2 days
Question:	This is the part number I got for my 03 Silverado 4.8 and amazon says it doesn’t fit that vehicle. Is this the right fuel pump for my truck
Answer:	Do you refer to the plug ends? If yes, please refer to the plug picture here: https://images-na.ssl-images-amazon.com/images/I/61RQ7hTwy-L._AC_SL1200_.jpg
Question:	whar fuel module fits my 1991 t30 Allegro motor home with the 454 engine with throttle body injection and 50 gallon fuel tank
Answer:	This was great fit right in and was really easy to install

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Part is validated, tested and matched to the right vehicle application
• Delphi brings 80 years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	Does anyone know the fuel pressure this is supposed to do
Answer:	Im not sure of the exact fuel pressure but i installed mine into a 1999 gmc sonoma zr2 with a 4.3l v6, and it works great.
Question:	I purchased one of these pumps in June of 2017 and it recently failed. What do I need to do for the warranty
Answer:	I recently sold my vehicle you'll have to do more research on the warranty
Question:	does this include a new seal
Answer:	Mine did have a new seal with it.
Question:	will this work for the 2000 s10 4 cylinder flex fuel model? thanks
Answer:	don't think it will. if you want to see what pump will work then go to rockauto.com and select your vehicle. I do that then usually take that part number and cross check it to see if amazon offers it in prime shipping. they usually do at a lower price and its here in 2 days....

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Rigorous OE-testing ensures the pump can withstand extreme temperatures ranging from -32 C to 65 C
• Delphi brings 80 years of OE Heritage into each Delphi pump, ensuring quality and fitment for each Delphi part.
• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi's OE standards
• Replacing the fuel filter and strainer is always recommended when replacing a fuel pump

User questions & answers

Question:	Is this the correct pump for a 1996 s10 with the W code
Answer:	Well input your vehicle into Amazon system and it surely would come up green saying it fits your vehicle.You may need minor details like trim model of your vehicle but it will come up much faster then you asking complete RANDOM amazon strangers if it will fit your vehicle eh.
Question:	i have a 1991 GMC full size Jimmy 5.7; 4x4; will this fit my truck
Answer:	Yes, Rockauto shows it fits 85 thru 96. be sure to order the strainer for it. It does not come with the strainer
Question:	How much psi does this fuel pump have
Answer:	about max 15psi only.This pump is ONLY for Carburetor or throttle body Injection (TBI - 2 injectors placed on top of a throttle body) vehicles ONLY !! If you have multi-port (GM spider 6cyl/8cyl injectors under plastic upper intake) injection vehicle this will NOT work and Vehicle WILL NOT start as it demands 55-70psi fuel pressure this pump will NOT deliver!
Question:	I currently have a delphi fe0111 in my 1993 lt1 corvette. i see that is not the reccomended one. the fe 0115 is. what is the difference? fuel flutters
Answer:	Hello, Delphi doesn't list the FE0111 but it does list FR0039 (VIN=J) or FE0114 (VIN=P). The FE0115 has a fuel pressure of 12psi while the other two have a PSI of 60 and 62. Your Vette probably requires a higher fuel pressure. I use the FE0115 in a 94 GMC 5.7 TBI. Hope this helps.

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

Delphi fuel modules and pumps are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, resulting in more efficient operation.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Internal springs increase durability by preventing tube chaffing
• Strainer is internal to module - providing better protection to the strainer element and improved filtering
• Rigorous OE-testing ensures the pump can withstand extreme temperatures
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Durability tested up to 150,000 miles and in more than 95% ethanol for flex applications for superior reliability
• Patented Gen IV turbine pump provides better pumping with less energy use and withstands today’s harsh alcohol fuel blends

User questions & answers

Question:	Does this work on flexfuel trucks? This 07.5 chevy doesn't have a pump control module and the pump i got for an 08 puts out 90 psi
Answer:	I have a 07.5 flex fuel as well and it worked fine for mine

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Rigorous OE-testing ensures the pump can withstand extreme temperatures
• Delphi brings 80 years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Part is validated, tested and matched to the right vehicle application

User questions & answers

Question:	Does Delphi back this part up with a warranty
Answer:	Yes I do believe that it has a warranty . I bought one and have no problems at all it's been over a year now and still working well . I am glad that I bought the pump but I also did a lot of research on the brand. They are one of the most reputable companies out there with outstanding results . Hope I have answered your question
Question:	Does this include the fuel level sending unit? It is shown in the picture but is not in the description
Answer:	Yes it does come with sending unit . Mine was easy drop in install. Works great
Question:	Will the delphi fuel pump #fgo340 fit a 2005 chevy silverado 1500 hd 6.0 liter engine
Answer:	I don't know. It was a perfect replacement pump for my 2005 Silverado extended cab with a 4.8 cylinder engine. I originally searched for a ac-delco pump and couldn't find the correct pump. After I searched looking for a Delphi fuel pump, I found it.
Question:	Does this include the O ring
Answer:	Yes it includes the O ring . It is a complete kit everything you need is there . Delphi is one of the most trusted companies out there for fuel pumps they are the very best that's why I will only buy from them

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

Fuel Module Assembly.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Part is validated, tested and matched to the right vehicle application
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	Does this fit california emissions vehicles? or do i need cfg
Answer:	This is the same part/# as the part Autozone sells in California, over $120 cheaper with Amazon prime...

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Part is validated, tested and matched to the right vehicle application
• Delphi brings 80 years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	Is the code on this pump TCU
Answer:	Yes, TCU, 1 connector. TCF is is the FG0053.
Question:	What's the warrenty
Answer:	Warranty: 1-year or 12,000-mile Delphi limited warranty
Question:	Does this come with the actual pump, and floater
Answer:	It does, but don't by it. I bought one and had to replace with a GM pump shortly after putting it in the truck. I tried to contact Delphi for a replacement with no response. Save yourself the headache and go to GM and buy the OEM pump.

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

Fuel Module Assembly.

• Delphi fuel modules and pumps are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, resulting in more efficient operation
• Where required, fuel assemblies include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge
• Delphi fuel pump assemblies are built with OE-validated parts and include OEM-grade wiring, electrical connectors and level sensor assemblies that deliver increased performance, durability and reliability over other aftermarket fuel pumps

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Part is validated, tested and matched to the right vehicle application
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	Will this work on 2003 lt tahoe 5.3l
Answer:	The FG0324 will only work for your CHEVROLET 2003 TAHOE 5.3L V8 if your Engine Vin (8th Letter From left to Right on the Vin Number) is the Letter T. If your Engine Vin is Z then the correct part for your vehicle is the Delphi FG0810.Best Regards,Romer
Question:	Does this come with a fuel level sensor as well
Answer:	It is a complete replacement unit (fuel level sending unit) included . It works just as my factory original in my 2002 tahoe ls with a 4.8 liter v8 2 wheel drive. Great product just about a year with it and I've had no issues.
Question:	Does this come with the strainers? My 2000 Tahoe 5.3 oem pump has an external strainer that looks like a small sock. I don't see that in the photos
Answer:	Yes it's internal not like the old style. Works great on my 5.3l 2001 tahoe.
Question:	how does the warranty work
Answer:	Uncertain, since I have not cause/reason for warranty issues. But my understanding is that warranty is handled by supplier with the assistance of Amazon if required. At least that has been my experience with other purchases via Amazon. Most automotive parts warranty do not cover labor.

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.

• Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
• Delphi brings 80 years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	Does this go with the 1.5l Civic LX
Answer:	I put mine in a 1990 1.5 crx. I think it would depend on the year you have. Honda street garage on youtube helped me out alot. If you look up some how to videos they go into better details

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

Delphi Fuel Modules are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, and operate more efficiently. Additionally, where required, our fuel modules include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge. Fuel modules also typically include a fuel vapor pressure sensor that detects any leaks in the fuel tank or associated evaporative emissions components.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Part is validated, tested and matched to the right vehicle application
• Rigorous OE-testing ensures the pump can withstand extreme temperatures
• Fit type: Vehicle Specific

User questions & answers

Question:	Do I need a wiring harness with this
Answer:	I used this fuel pump / sending unit for my 2004.5 Dodge Ram diesel. It was a exact replacement and did NOT require a wiring harness. It comes exactly as pictured.

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Part is validated, tested and matched to the right vehicle application
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	will this fuel pump fit my dodge ram 1500 2001 rwd
Answer:	you need a Delphi FGO227 fuel pump your lucky amazon warehouse deals has one like new condition for $57.85
Question:	what size tank does it fit
Answer:	Fit my 35 gallon tank perfectly.

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

As a leading OE supplier to the automotive industry, Delphi holds more than 30 OE-proprietary innovations and 150 patents in fuel module and pump design. As a result, our fuel pumps restore fast-pressure performance and system integrity to provide better pumping through less energy. Delphi fuel pumps feature internal springs for increased durability and enhanced stability, while a lower amperage draw places less load on a vehicle’s electrical system. Our fuel pumps include a large volume reservoir to better handle low-fuel situations and vehicle cornering, as well as fuel-level, gold-filled sensors for improved corrosion resistance. Other benefits of our fuel pumps include consistent pump flow, an enhanced filtration system for longer pump life and an OE-service body harness and connector for superior performance, durability and ease of installation.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Part is validated, tested and matched to the right vehicle application
• Rigorous OE-testing ensures the pump can withstand extreme temperatures

User questions & answers

Question:	I just bought this pump for my 2002 Silverado 4.3L V6. the supplied Delphi Gasket seems too big--won't install right. Should I use old gasket? Thx
Answer:	I ended up using the old gasket because the new one did not fit correctly on my 2000 Chevy Silverado 15000 LT. 5.3 V8. I would say use it if you don't have any other alternative but inspect it first and make sure there is no wear and tear, If there is then I'd recommend getting someone to drive you to your auto store and picking up something more suitable.
Question:	I noticed that it does not come with a fuel sock do I need this for a 2000 Chevy Silverado
Answer:	Not sure on a 2000 but my 03 did not need one. I believe that should be the case for yours as well.
Question:	what's the psi of this pump
Answer:	To my knowledge this fuel pump has to put 60 psi for vechicle to start. And after running 55-65 psi
Question:	whats the difference between fuel pump Delphi FG 0053 and Delphi FG 0407, both says are the correct for my 2000 gmc sierra sle 1500,vin T
Answer:	not sure.the FG0053 pump has 2 plug ins. one for fuel pump and sender. the other for fuel tank pressure sensor. there might be a differance if your truck is a flex fuel model.

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Product description

Delphi's fuel assemblies are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, resulting in more efficient operation. Additionally, where required, fuel assemblies include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge. Fuel modules typically include a fuel vapor pressure sensor that detects any leaks in the fuel tank or associated evaporative emissions components.

• Limited lifetime warranty
• Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part
• Internal springs increase durability by preventing tube chaffing
• Strainer is internal to module - providing better protection to the strainer element and improved filtering
• Rigorous OE-testing ensures the pump can withstand extreme temperatures
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Durability tested up to 150,000 miles and in more than 20% ethanol for superior reliability
• Patented Gen IV turbine pump provides better pumping with less energy use and withstands today’s harsh alcohol fuel blends

Product features

OE Engineered

Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs.

Durability Tested

Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol.

For Over 80 Years

Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years.

Innovative Design

We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone.

Why Do Fuel Pumps Fail?

OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by:

Start Your New Pump in a Clean Environment

Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well.

Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately.

A Pressure Test is Not Enough to Condemn the Pump

High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated.

Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter.

No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid.

What to Check Prior to Repair

The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to:

1. Confirm there is fuel in the fuel tank

2. Check fuel pressure

3. Check flow

4. Check fuel filter and pressure regulator

5. Perform a voltage drop test

6. Check electrical connections

7. Clean tank and inspect for debris

What Tools Will I Need?

Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand.

Safety first

Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can.

Fuel Module Assemblies

The Delphi fuel module is a complete assembly, meaning that all the necessary components, like filters and strainers, are included for easier installation. It's a complete repair in a box, backed by smart designs, and extreme testing.

Hanger Pump Assemblies

Delphi fuel pump hanger/sender assemblies are a complete repair in a box: with one SKU, you get an OE pump, fuel and vapor pipes and valves, a fuel level sensor, plus OE connections for fuel and vapor lines. Like all of our fuel delivery parts, our hanger pumps provide clean and adequate fuel flow in all engine operating conditions.

Electric Fuel Pumps

Our patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends. It delivers fast fuel pressure rise for fast engine starts.

Delphi electric fuel pumps are designed for a flawless electrical installation and are rigorously tested to withstand extreme temperatures and operate even with low voltage.

And More

Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.