12 best 12v fuel transfer pumps

Product description

The FR4210H is a 12V 20 GPM fuel transfer pump that comes with a 1” x 12’ discharge hose, 1” manual nozzle, 1” x 34” telescoping steel suction pipe, 1" elbow, 5’ 12-gauge ground wire, and a 18’ 12 gauge 2-wire battery cable. It can be used to pump gasoline, diesel, kerosene, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20. The previous FR4210G model has been updated to the FR4210H model. With a removable junction box, the product is now easier to install. The performance specifications of the product did not change.

• Durable cast iron pump housing built to withstand the wear and tear of rough operating environments
• Removable junction box allows for easier installation
• Thermal overload protection prevents motor from overheating during abnormal usage
• Pump is capable of pumping fluid out of an 8' deep storage tank at sea level
• Rugged switch lever is designed to endure heavy abuse

User questions & answers

Question:	I am new to this. i need a complete set up with a 50 feet hose. can you assemble it? or at lest direct me to what i need
Answer:	No not at all. These are great.
Question:	Dose it come with power cord
Answer:	This cigarette ashtray is made of Zinc Alloy, Nickel/lead/cadmium free, Rustless/Fadeless/Surface Polishing/Smooth
Question:	Does it have calibartion certificate from manufacture
Answer:	Yes easy to clean. No lid does not pop out.
Question:	does this pump mount up to a 55 gallon drum
Answer:	ABSOLUTELY. Best ashtray I have ever purchased

Product features

Rotary Vane Technology

Rotary vane technology is a positive displacement (fixed volume) pump design that utilizes an offset rotor with sliding vanes that rotates on a motor shaft inside the pump. The vanes move outward against the pump cavity to form individual chambers (positive displacement). Fuel enters into the pump cavity through the inlet port on the rotor side where the vanes are fully extended. As the rotor turns, the vanes collapse inward creating the pressure that forces the fuel into the discharge port and through the hose.

Advantages of rotary vane technology…..

• Increased suction lift
• No performance loss due to vane wear
• Self-priming ability
• Easy maintenance
• Consistent performance

Suction Lift

The maximum suction lift rating refers to the maximum vertical distance that a pump can lift fuel out of a tank. On rotary vane pumps, suction lift is created due to the offset of the rotor in the pump cavity, which increases the volume in the chamber between the vanes, thus lowering the pressure on the pump’s inlet. Atmospheric pressure, which is now greater than the inlet pressure in the pump, moves the fuel from the tank to the pump cavity (self-priming).

Suction lift is determined by the pump specifications, the type of fuel, and the altitude of the location where the pump is installed. Higher altitudes reduce the suction lift of a pump due to the reduced atmospheric pressure.

To achieve maximum suction lift, the inlet plumbing should be as straight as possible with no elbows or bends in the line. Accessories, such as filters, should not be installed on the inlet side of the pump. Valves should be set with minimum spring pressure and must contain a pressure relief valve.

Discharge Pressure

Discharge pressure refers to the systems pressure while dispensing. It effects flow-rate based on the pump’s design - the lower the discharge pressure, the higher the flow-rate.

Variables that increase discharge pressure/decrease flow-rate:

• Adding accessories (filters, measuring devices, swivels, etc…)
• Changing accessories (increasing the length or decreasing diameter of hose)
• Dispensing fuel above the pump (the higher the discharge point is above the pump the lower flow-rate)
• Pumping higher viscosity fluids (Fill-Rite pumps are designed to pump at a viscosity no greater than kerosene)

To lower discharge pressure/increase flow-rate, remove or limit restrictions. Examples include, moving from a 10 micron filter to 30 micron filter, changing from a 800 series to a 900 series or TT10 series, limiting the use of elbows in system design, or increasing the diameter of your discharge hose/pipe.

KIT120RKG

Primary pump repair kit for 4200 series pumps.

KIT122ARM

Motor repair kit for 4200 series pumps.

KIT120BD

Bio-diesel conversion kit for 4200 series pumps.

KIT120NB

Nozzle boot kit for 4200 series pumps.

NX25 Series Fuel Transfer Pump

Nextec Intelligence is an exclusive array of design advancements, technologies and user functionalities that take pump performance to unprecedented levels. Intelligent Tones inform when attention is needed. A variable speed motor automatically adjusts for peak performance with improved suction lift. More compact, lighter, and less amp draw—it sets a new standard for efficiency.

Simple features, such as the lower pump weight, makes this pump great for mobile applications or on the less sturdy aluminum fuel tanks. Other convenient features, like a removable power cord or an auto power down function (after 20 minutes of inactivity), are benefits other pumps just don't offer. Whether the application is 12V, 24V, 115V, or 230V this premium offering from Fill-Rite consistently gets the job done.

With Nextec, the future of fuel transfer is here.

Product description

The SD1202H is a 12V 13 GPM standard duty pump that comes with a ¾” x 10’ discharge hose, ¾” manual nozzle, 1” x 29” 2 piece poly suction pipe, 5’ 12-gauge ground wire, 3/4" elbow and a 15’ 12 gauge 2-wire battery cable. It can be used to pump gasoline, diesel, kerosene, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20. The previous SD1202G model has been updated to the SD1202H model. With a removable junction box, the product is now easier to install. The performance specifications of the product did not change.

• Standard duty product developed for limited usage fuel transfer applications
• Capable of transferring diesel, gasoline, kerosene, E15, and biodiesel up to B20
• Max flowrate of 13 GPM is ideal for fueling smaller equipment
• Pump comes with discharge hose, manual nozzle, suction pipe, and elbow
• UL and cUL listed product

User questions & answers

Question:	What diameter is the fill hose
Answer:	You can, but if you're going to use them as ash trays I wouldn't paint the inside.
Question:	Can you plug this unit directly into the wall
Answer:	Honestly we’ve had ours for over a year and they still glow, faintly but they work
Question:	what wire gauge uses this unit
Answer:	yes, it is better to absorb the light first, the more absorb, glow time will be longer.
Question:	Is there any way of buying this pump without the hose, nozzle, etc... Would be cheaper. I don't need the rest. Just a replacement pump
Answer:	no, not at all. I bought these months ago for my bf and his roommates and they are wonderful. super easy to clean, and they actually do glow in the dark. definitely a good use for the price and what it is. will last you forever.

Product features

Being The Best Isn't Easy

This industry standard DC pump dispenses up to 13 GPM (49 LPM). The SD1202G is ideal for pumping gas, diesel fuel and kerosene. With an amp draw that's easy on your DC power source. Explosion-proof UL/cUL listed 1/4 HP motor. The SD1202G comes complete with 10 ft. static wire hose and manual nozzle.

It requires diligence. It requires a steadfast commitment to continuous improvement. It requires the mentality that being the best is a journey, not a destination.

For fuel transfer, nothing beats Fill-Rite. Give us a try. ..we would love to be a part of your journey to be the best.

Our Legacy Is Strong

Fill-Rite has continued to develop its core competency providing rugged, high performance, fuel, oil, and chemical transfer pumps and meters that have continuously enjoyed a leadership position for the past 50 years. Tuthill Transfer Systems and Fill-Rite are now celebrating 50 Years of Excellence providing the industries best fluid transfer products in the world.

Legendary Fill-Rite quality continues with cast iron pump housings for heavy duty applications, and continues inside with rotors and vanes made from iron and bronze, assuring robust performance over the life of the product. Match your fuel transfer pump with genuine Fill-Rite accessories like hoses, nozzles, and meters for the very best performance.

Product description

The FR1204H is a 12V 15 GPM fuel transfer pump that comes as a pump only model and comes with a 3/4" elbow, 5’ 12-gauge ground wire, and a 18’ 12 gauge 2-wire battery cable (3/4" outlet). It can be used to pump gasoline, diesel, kerosene, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20. The previous FR1204G model has been updated to the FR1204H model. With a removable junction box, the product is now easier to install. The performance specifications of the product did not change.

• Durable cast iron pump housing built to withstand the wear and tear of rough operating environments
• Removable junction box allows for easier installation
• Thermal overload protection prevents motor from overheating during abnormal usage
• Pump is capable of pumping fluid out of an 8' deep storage tank at sea level
• Rugged switch lever is designed to endure heavy abuse

User questions & answers

Question:	I would like to buy this package but can I get the green handle automatic nozzle instead
Answer:	I don't believe it does. A separate wire to ground can be attached and taped to the outside of the hose if you wish.
Question:	Which Fill-Rite pump is suitable for aviation fuel? (avgas
Answer:	I believe the hoses are pre manufactured to standard lengths.
Question:	can the pump run with the nozzle closed without damaging the pump
Answer:	Make your own home Depot has all the parts.
Question:	Can someone tell me for sure if this particular pump carries the 2 year warranty expressed here
Answer:	The fittings are 3/4 pipe so I guess the i.d of the hose would be close to that

Product features

Rotary Vane

Rotary vane technology is a positive displacement (fixed volume) pump design that utilizes an offset rotor with sliding vanes that rotates on a motor shaft inside the pump. The vanes move outward against the pump cavity to form individual chambers (positive displacement). Fuel enters into the pump cavity through the inlet port on the rotor side where the vanes are fully extended. As the rotor turns, the vanes collapse inward creating the pressure that forces the fuel into the discharge port and through the hose.

Advantages of rotary vane technology…..

• Increased suction lift
• No performance loss due to vane wear
• Self-priming ability
• Easy maintenance
• Consistent performance

Suction Lift

The maximum suction lift rating refers to the maximum vertical distance that a pump can lift fuel out of a tank. On rotary vane pumps, suction lift is created due to the offset of the rotor in the pump cavity, which increases the volume in the chamber between the vanes, thus lowering the pressure on the pump’s inlet. Atmospheric pressure, which is now greater than the inlet pressure in the pump, moves the fuel from the tank to the pump cavity (self-priming).

Suction lift is determined by the pump specifications, the type of fuel, and the altitude of the location where the pump is installed. Higher altitudes reduce the suction lift of a pump due to the reduced atmospheric pressure.

To achieve maximum suction lift, the inlet plumbing should be as straight as possible with no elbows or bends in the line. Accessories, such as filters, should not be installed on the inlet side of the pump. Valves should be set with minimum spring pressure and must contain a pressure relief valve.

Discharge Pressure

Discharge pressure refers to the systems pressure while dispensing. It effects flow-rate based on the pump’s design - the lower the discharge pressure, the higher the flow-rate.

Variables that increase discharge pressure/decrease flow-rate:

• Adding accessories (filters, measuring devices, swivels, etc…)
• Changing accessories (increasing the length or decreasing diameter of hose)
• Dispensing fuel above the pump (the higher the discharge point is above the pump the lower flow-rate)p
• Pumping higher viscosity fluids (Fill-Rite pumps are designed to pump at a viscosity no greater than kerosene)

To lower discharge pressure/increase flow-rate, remove or limit restrictions. Examples include, moving from a 10 micron filter to 30 micron filter, changing from a 800 series to a 900 series or TT10 series, limiting the use of elbows in system design, or increasing the diameter of your discharge hose/pipe.

KIT120RKG

Primary pump repair kit for 1200 series pumps.

KIT120ARM

Motor repair kit for 1200 series pumps.

KIT120BD

Bio-diesel conversion kit for 1200 series pumps.

KIT120NB

Nozzle boot kit for 1200 series pumps.

NX25 Series Fuel Transfer Pump

Nextec Intelligence is an exclusive array of design advancements, technologies and user functionalities that take pump performance to unprecedented levels. Intelligent Tones inform when attention is needed. A variable speed motor automatically adjusts for peak performance with improved suction lift. More compact, lighter, and less amp draw—it sets a new standard for efficiency.

Simple features, such as the lower pump weight, makes this pump great for mobile applications or on the less sturdy aluminum fuel tanks. Other convenient features, like a removable power cord or an auto power down function (after 20 minutes of inactivity), are benefits other pumps just don't offer. Whether the application is 12V, 24V, 115V, or 230V this premium offering from Fill-Rite consistently gets the job done.

With Nextec, the future of fuel transfer is here.

Product description

Description:

100% brand new and high quality.

This universal 12 volt electric fuel pump may be used as booster, standby unit or as a completely independent fuel pump installation.

The product is manufactured in ISO 9000 / ISO 9001 / ISO 9002 certified facilities.



Specification:

Flow Rate:30 GPH

Hose Size: 5/16"

Volts:12V Operation

Pressure: 5-9 PSI

Fuse specification: 12 Amps

Material: White zinc

Cross reference : E8012S, FD0002, P60430, EP12S, 6414671



Application:

Universal . Pump is self priming and designed for Import Carburetor equipped Cars and Trucks and also Replacement Performance Carburetors .

- All 12 Volt Cars , Trucks , Boats & Generators





Package Includes:

1 x E8012S Electric Fuel Pump Kit

• Output Pressure : 5 - 9 PSI; Input Voltage: 12V; Output : 30 GPH. Fuse specification: 12 Amps; Crossreference : E8012S, EP12S, FD0002, P60430, 6414671
• 100% mechanically tested prior, ensures optimal performance and enhanced durability. Highest 12 inches fuel suction
• 100% Brand new and high quality, TS16949 quality system certified. Built-in German-made copper coil
• Universal For All 12 Volt Cars , Trucks , Boats & Generators
• 2 YEARS WARRANTY AND 100% MONEY BACK -- If you are not satisfied with the product, please contact us to refund or replace the product quickly and easily

User questions & answers

Question:	Will this work for a 1973 F350 360 motor with a 2 Barrel carburetor
Answer:	This is the cheapest way out just by a bare pump get yourself a piece of 1 inch threaded pipe that’ll go on the bottom of the pump get a piece of 10 gauge 2 wire that will power the pump by a roll of 1 inch hose and a 1 inch swivel and get an automatic nozzle that’ll be your best set up add a 1” in/out filter if you want
Question:	I want to use this to prime the line then shut off / start the engine and run with the std mechanical. Will this allow pulling fuel through
Answer:	This pump comes with an 18' DC power cord.
Question:	What is the small cylinder in the kit? Is it a check valve, filter, adapter, something else
Answer:	This is not a certified weights and measures sorta meter... as in not for use in sale of liquids dispensed. That is usually done by a county auditor office.
Question:	What fuel pump can you recommend on a boat it needs to lift the fuel about 30 inches
Answer:	Yes, this pump has a 2" bung but the suction tube max length is 34" so you will need to replace it with a longer pipe.

• 12 GAL./MINUTE SPEED: The 175W 3600rpm motor transfers fuel up to 45L/12Gal. per minute. Built to last with extra-thick copper wires for improved heat dissipation performance and extended service life.
• POWERFUL PUMPING: The OMT self-priming, rotating vane pump has a convenient on/off switch and an inner bypass valve able to lift oil up to 32 ft. of height.
• PORTABLE & MOUNTABLE: Our self-priming oil pump features a mountable base while providing great portability with an easy-carry handle. Wires wrapped with premium rubber for superior durability and safety.
• STEEL/COPPER CONSTRUCTION: The cast steel impeller and sturdy copper motor, deliver unparalleled suction power, stable performance, and extreme durability.
• WIDE COMPATIBILITY: Compatible with diesel, kerosene, machine oil and transformer oil; Equipped with a non-return valve to prevent oil flow-back for improved efficiency.

User questions & answers

Question:	does this product come with all the required hoses
Answer:	There is no indication on the motor. Packaging not available. Supplier is Pool and Spa Duty, Tipp City OH., They may know.
Question:	Will it suck 75w140 gear oil out of ford ptu? what about mercon v transmission oil from transmission of the car
Answer:	They were very helpful to resolve my issues and no return was required 😎
Question:	Will this pump transfer diesel oil and or hydraulic fluid
Answer:	That I wouldn't know. You would have to go to a "motor crossover" type of website to match it up. What I can tell you is this motor is Awesome. I quit letting mine cycle on for the day then off at night. It burned out the Stator. I now run it 24/7 and it is still unbelievably strong, quite and no leaks.
Question:	Does this product come with both sets of hoses
Answer:	??? don't know check with the manufacturer

Product features

Orion Motor Tech Diesel Transfer Pump Kit 12V Volt DC Fuel Self Priming Oil 45L/Min W/Hose

• 【Powerful Motor】It can transfer up to 45L/min with a 175W 3600rpm motor, allowing you to extract oil or diesel from your vehicle quickly.
• 【Safety Assurance】A self-priming, rotating vane pump with an on/off switch and an inner bypass valve ensures reliable operation every time.
• 【Convenient】The pump can pump can lift oil up to 32 feet so that you don’t need to lift the barrels and tanks making for very convenient on-site transfer of diesel from barrels and drums to diesel powered vehicles and equipment.
• 【Suitable for Different Use】12V battery connecters let you run the pump with cars, motorcycles, vans, quads and other 12V vehicles.
• 【Something You Should Pay Attention to】The package includes 1 x diesel pump. Note: The oil pump is suitable for diesel, biodiesel, and kerosene only. Not suitable for low flammability fuel (such as gasoline, liquefied petroleum gas, alcohol, etc.)

User questions & answers

Question:	Can this pump be used to pump water
Answer:	Hi. Carolina L., The fill hose diameter is 3/4".
Question:	Input and output requires a 1" id hose. any possibility of adapting down to say a 5/8" or 3/4" output
Answer:	No, this is the 12v DC model. The version that would be able to plug into a wall would be the SD602G
Question:	Can this pump be used to pump gasoline
Answer:	I'm sorry.I didn't use the wire that came with the pump as it wasn't long enough. I had 12 guage already and that is what I used.
Question:	I know they said not suitable for gas but will it still work
Answer:	To answer your question , yes. Simply narrow your Amazon search to Fill-Rite SD602G pump only. How ever sometimes it's more expensive that way and besides it never hurts to have spare parts. Hope this helps.

Product features

Fuel Engineering Equipment

Fuel Truck

Fuel Car

Fuel Ship

Fuel The Oil Drum

Fuel Agricultural Equipment

• 【Upgraded Fuel Pump Kit】All in one GEEBAT Fuel Pump Kit includes all the component you need: 12V Electric Fuel Pump, 6.56-Foot 5/16" ID Fuel Line, 1/4 Inch & 5/16 Inch Fuel Filters and Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump.
• 【Electric Fuel Pump】Material: Copper Clad Aluminum; Voltage: 12V; Current: 1.2A; Output Pressure is 3-6 psi, which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.
• 【3-Layer Thickened Fuel Line】The fuel line is made of 3-layers: inner pipe, outer pipe and extra reinforcement layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. The wall thickness is 3.2mm. Oil resistant, cold-resistant and ethanol tolerance. 6.5 Foot / 2m hose can be cut to size for all your applications.
• 【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.
• 【Wide Application】Electric fuel pump kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower.

User questions & answers

Question:	Does it need to be mounted within 12" of tank (as it pushes fuel not suck
Answer:	Yes, it will work with any low pressure fuel system.
Question:	Why did you not give us the other end of this plug, (no one will ever know the name of the plug we need
Answer:	Yes it will. I left mine in the line after I got the new mechanical pump on. I don't run it at all anymore, but you should have no problem using it to prime.
Question:	is the pump almost 12 inches long
Answer:	It’s the prefilter, have to use this one in inlet end in case any particle goes into the pump to cause the pump get stuck,thanks!
Question:	What kind of connector is used to hook to battery
Answer:	This pump will lift it that far. I'm pulling gas about 18 feet and 30 inches up.

Product features

All in one GEEBAT Fuel Pump Kit

The perfect product combination meets your needs for the oil supply system at one time.

One-stop shopping is favorable!

How to choose a good Electric Fuel Pump for your machine?

The answer is Voltage & Quality.

So, choosing our 12V Universal Electric Fuel Pump kit could working reliability. What's more, filters and hose clamps are necessary for fuel line. They are 100% compatible with each other in size.

Electric Fuel Pump

Output Pressure is 3-6 psi, which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.

3-Layer Thickened Fuel Line

The wall thickness is 3.2mm. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance.

Fuel Filter

Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

Stainless steel Hose clamp

All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking.

Product description

Product Description

100% Brand New

High Quality

Ball Bearing Construction, No Lubrication Required

Thermally Protected And Explosion-Proof

Cast Iron Material Pump Body

Manual Nozzle

2" Male NPT On Bung Adapter

1" Female NPT On Suction Port

Professional Installer is Highly Recommended (No Instruction Included)



Specifications

Color: Blue

HP: 1/4

AMP: 22

Watts: 264

Flow (GPM): 20

RPM Speed: 2600

Max. Total Head : 36.96 Ft

Max. Suction Lift : 8 Ft

Inlet Port: 1"

Outlet Port : 1"

Discharge : 8 Ft

Duty Cycle: 30 Min.

Self-Priming: Yes

Bypass Vave: Yes

Seal Type: Oil Seal

Nozzle Type: Manual

Nose: 3/4" X 12ft



Package

1 x Gasoline pump

As the picture shown

• 【Fitment】 - For Transfer of Gasoline, Diesel Fuel, Kerosene, Mineral Spirits, Heptane, Hexane, E15, Biodiesel, and Similar Fuels or Oils.
• 【Multi-function】-This gasoline pump is fits for lawn tractors, boats, jet skis , snowmobiles, trimmers, and etc.
• 【Ball Bearing Construction】 - For the design of ball bearing, no lubrication is required in our gasoline pump.
• 【High Capacity】 - The capacity of this gasoline pump is up to 20 GMP, which could make fueling be more efficient.
• 【High Security】 - Our gasoline pump equipped for padlocking, your pump nozzle can be padlocked to the pump for added security. Features Thermal Protection and Bypass Value to Prevent Overloading.

User questions & answers

Question:	can this be installed beside transfer tank instead of on top, I have a tonnaeu cover and only have several inches space between tank and tonnaeu
Answer:	Yes
Question:	Does the power cord come with unit and if so, how long
Answer:	Yes, I did reduce it and it works fine, I’m using it to transfer diesel
Question:	Can this be hooked up to the battery permanently? Or does it come with alligator clips? If hooked up permanently, have to purchase something separate
Answer:	I would definitely not use this pump for gasoline.
Question:	How would this work with a car
Answer:	Only if you want to risk your life in an explosion that melts your face

• Dry lift and siphon gas from most vehicles, boats & equipment - A must have prepper tool -See all 5 by clicking on blue lettered "GasTapper" at top of page
• Weather resistant air-tight, fume proof case with pressure release valve so that you can store it safely in a vehicle
• 12V case-mounted Automotive grade (7-10 PSI) high-lift pump with LED power indicator and plug for cord disconnect
• 8’ coils of 3/8” FuelFlex 65, 6' 1/4 line, fuel filter, 12V auto pwr plug, in-line switch 15' 12V cord
• 2014 SEMA new products award winner! Built in the USA with US and imported parts - IMPORTANT NOTE: can not be used with 110V AC to DC convertors like automotive battery chargers. This unit has a circuit board inside and requires a computer grade 110V to 12V convertor. Motor will make noise but will not pump.

User questions & answers

Question:	Would I be able to set my gas can on the ground and have this pump gas into my car's gas tank, or would I have to hold my can level with the tank
Answer:	Don't see why you wouldn't be able to pump gas from can on ground into your gas tank. In my case gasoline was pumped up a little over 2 1/2 feet, so I don't see why it wouldn't work in your case. Might be easier on the pump to first get it started by holding the can off the ground then put it on the ground. Pump does work good and 'seems' to be a decent product. I've only had to use it twice and it worked well in both cases.
Question:	Will this work on a Trailblazer
Answer:	While we don't have any test results with the Trailblazer, the GasTapper has been used successfully in most GM vehicles of that era (2001-2009). We can guide you further over the phone to answer specific questions and/or to offer some tips on using the GasTapper with your Trailblazer. Dave---
Question:	Does this work on a 2009 Lexus RX
Answer:	Should work on any car. I love mine.
Question:	Will this work to pull motor oil out from the dipstick tube
Answer:	Hi Greg, it has been done but the 1/4 line makes it slow. OIL MUST be fully warm. Viscosity is key. Flush with kerosene when done.

Product features

GasTapper 12 Volt Standard Fuel Transfer Pump

The GasTapper 12V Fuel Transfer Pump comes with useful features to help you get the job done. It works on many cars*, boats, RVs, UTVs, as well as a variety of other fuel vessels.

Portability

It's great to always be prepared for the unexpected. That's why we house our transfer pumps in top of the line fume & weather proof cases that are both portable & durable.

Safety

We want our customers to have ease of mind and the ability to get a job done cleanly and effectively. Now you can transfer fuel without spilling or tasting it!

Patented Hose Man Clip

• Secure the Hose to a Variety of Containers to Prevent Spilage
• USA Made and Certified Fuel Grade Hose

Standard Case

• Weather Proof
• Fume Proof
• Lightweight

Power Cord and Filter w/ Screen

• 15' Power Cord w/ Power Switch
• 12V Cigarette Lighter Adapter & Accessory Plug Adapter
• Built In Filter

Fuel Funnel

• USA Made
• Standard Gas Tank Sized Mouth
• Further Prevents Spills

Product description

Note: 1. This is a 12V fuel pump. When customers install, should make sure that the voltage is 12V, couldn't be 24V. 2. It will be better to test the positive pole and negative pole before installing.

• JDMSPEED Universal for gasoline or diesel engine
• Voltage : 12V Current : andlt;1.8A
• Output Pressure : 3-6 PSI
• Installation hole distance : 2.638 inch (6.7cm); Tubing Interface: 0.315inch (0.8cm)
• Flows : andgt; 70 L/H Pressure : 0.032-0 .045 MPA

User questions & answers

Question:	Will this work on a 235 in line 6 cylinder
Answer:	No, this is an in line fuel pump that works in many applications but not for a Chevy 235. You might check out the Airtex 4149 Fuel Pump instead!
Question:	What size fuse should I use for this pump
Answer:	20 amps would start a fire. It uses about 1.2 amps, 1.5 amps max normal use, so I recommend a 2amp fuse.
Question:	I just ordered and received this unit, it has fuel in it already like its been used. Is this normal? Anyone else experience this
Answer:	I used to work at a fuel pump Factory. It's oil that comes inside of a new fuel pump. Sometimes they can smell kind of like fuel
Question:	will this work on a lawn mower? or to much fuel input
Answer:	I use mine on a Golf Cart with a small gas engine . the pump works very well

• GASOLINE OR DIESEL 12 volt electric, dry start & transfer fuel from airplanes, boats, RV's, ATV's, many cars & equipment - An excellent tool for preppers!
• Large weather resistant air-tight carrying case 12" x 14" x 5" - carry fume free
• Case mounted pump moves 1.2 gallons per minute, 70 gl. per hr. - high lift pump 24'
• 8’ lines of 3/8” USA fuel line, 7' 3/8 line, 12V auto pwr plug, LED indicator, fuse
• 15' air activated safety switch - Look for GASOLINE SPECIFIC when comparing. Focus on Safety.

User questions & answers

Question:	Does this require a separate battery, or will it hook to a 12v car battery
Answer:	Mine is 4 ft away no problems
Question:	What is the amperage draw on this unit and does it have a run time limit
Answer:	I guess that's the way they come
Question:	how long is the 12v cable
Answer:	no
Question:	How long of a hose can be attached to this and still have it function properly
Answer:	I used alligator clamps

Product features

GasTapper 12 Volt Max Fuel Transfer Pump

The GasTapper 12V Max Fuel Transfer Pump comes with useful features to help you get the job done. It works on many cars*, boats, RVs, UTVs, as well as a variety of other fuel vessels.

Portability

It's great to always be prepared for the unexpected. That's why we house our transfer pumps in top of the line fume & weather proof cases that are both portable & durable.

Safety

We want our customers to have ease of mind and the ability to get a job done cleanly and effectively. Now you can transfer fuel without spilling or tasting it!

Patented Hose Man Clip & USA Made Fuel Line

• Secure the Hose to a Variety of Containers to Prevent Spillage
• Model Includes 2 Clips for both the Input and Output Sides
• USA Made and Certified Fuel Grade Hose

Max Case

• Weather Proof
• Fume Proof
• Lightweight

12V Fuel Pump

• German Designed Fuel Pump
• Capable of Pumping One Gallon Per Minute
• Durable & Efficient
• Gasoline & Diesel Specific

Air Safety Switch

• 15' Safety Switch
• Acts as Remote Control for Full Control

Product description

AmazonCommercial proudly presents its Portable Fuel Box Transfer Pump Kit includes the 10GPM/40LPM DIESEL ONLY Self-Priming 12V DC Pump withAlligator Clamp Connections, a 13ft. (4m) Delivery/Suction Hose (easy to cut & customize to your needs) with Filter & Aluminum Manual Nozzle. The pump has a built-in secure handle & frame allowing for efficient storage & applicable use for: boats, pick-up/work trucks & agricultural. The pump, hoses & nozzle are all designed to be portable & transport easy for on the go or emergency back-up applications. The AmazonCommercial pump comes in a very strong & durable steel frame to protect the pump during transit & the user during operation. This pump is designed for (DIESEL FUEL ONLY) - DO NOT USE FOR GASOLINE. We recommend users to always wear eye & hand protection.

• Portable diesel fuel box transfer pump kit with a self-priming 12V DC pump motor and a 10GPM (40LPM) flow rate; includes red/black (+/-) alligator clamp connections, an aluminum manual nozzle, and a 13-foot delivery/suction hose with filter
• Pump effectively operates in temperatures ranging from -4°F to 140°F (-20°C to 60°C); recommended duty cycle is 30-minute intervals with a cool down of 30 minutes in between cycles; note: for diesel fuel ONLY; do not use for gasoline
• Low-tension brush motor with intermittent cycling and closed-type IP55-class design (UNSC/IEC standard 60529 & EN60034-5-2001); rigorously tested pump ensures high-quality performance by ISO 9001:2008 standards (Cert# 16092009)
• Thermal-protected pump provides a built-in 3-minute bypass valve and a protective powder-coated steel frame; hard impact-resistant polypropylene case offers easy transport and space-saving storage of all components (pump, internal parts, and accessories)
• Ideal for use with boats, pick-up trucks, fuel stations, construction sites, tractors, and everyday DIY projects; measures 18.4 by 18 by 8.3 inches; weighs 21 pounds; backed by an AmazonCommercial 1-year limited warranty

User questions & answers

Question:	How long is the 12v cable
Answer:	Not designed for that
Question:	What are the dimensions of this
Answer:	Yes. 20 feet
Question:	How to know the exact volume I've pumped
Answer:	It doesn’t not come with alligator clips. I have the one that i purchased on a mobile tank that I purchased clips to use around site
Question:	Can this be used to pump gasoline
Answer:	pumps gas great

Product features

Fuel Transfer Pump Kit

The kit’s self-priming pump transfers diesel at a 10GPM (40LPM) flow rate. Use it for diesel fuel ONLY; do not use it for gasoline.

Powerful, Protected Motor

The system’s self-priming 12V DC pump motor is low-tension with intermittent cycling, and its closed-type design (class IP55) protects the motor.

Durable Design

The thermal-protected pump provides a built-in 3-minute bypass valve, a steel frame, alligator clamps, a delivery/suction hose, and a manual nozzle.

Portable, Compact Size

The kit’s hard impact-resistant polypropylene case provides easy transport and space-saving storage of all components.