13 best electric trailer brakes

Product description

Black Steel Construction. Fits wheels 15" & Larger. Axle size 5200-7000lb. Wheel Bolt Pattern 6 lug or 8 lug". Fits Spindle Size #42. 12" 6 lug or 8 lug" Steel Drum. Driver's and Passenger's Side. Works with Al-Ko, Dexter, Lippert and Quality Trailer Axles. Magnet, Pads, Springs, Complete. Adjustable Brakes.

• Dexter Style Backing Plate
• Axle Size - 5200-7000lb
• Brake Flange - 5 Bolt
• Fits Spindle - #42
• eCustomhitch Carries a Variety of Electric and Hydraulic Trailer Brake Parts

User questions & answers

Question:	Are they the same as part number k
Answer:	H rated tires are tested up to 130 mph where V is tested up to 149mph (minor difference)
Question:	does anybody know if the Hub drum assemblies are available for these brakes
Answer:	Hello. Thank you for reaching out. The year of manufacturing for the tire PIRELLI SCORPION ZERO ALL SEASON (VOL) 235/60R18 103V is 2016. Please feel free to ask if you have any questions. Thank you for your interest. Alejandra Z. Customer Service Representative
Question:	Self adjusting? Saw two different answers
Answer:	Hello, As long as the size is matching, and the speed and load index is same or better, this tire is good for your vehicle. Thank you for your interest
Question:	Will this replace part # 52860? 8lug 3inch tube
Answer:	They are from 2017

• Pair of 10" x 2.25" TruRdye electric trailer brake assemblies with parts.
• 4 Hole mounting, comes with mounting bolts, nuts, and lock washers
• For Alko, Dexter, Quality, or other popular trailer axle manufacturers.
• TruRyde Brakes
• TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

User questions & answers

Question:	Is the brake magnet included
Answer:	Nev-R Lube as I believe it are just the axle bearings. The axles themselves have a standard flange welded to it that SHOULD fit these standard Brake Assemblies. I would say yes with 95% certainty
Question:	Are these self-adjusting
Answer:	I dont recall it fit my 2003 keystone Laredo perfectly
Question:	Are these made in USA or China
Answer:	center hole 3 1/4 inches. they could be welded but they make a bracket to weld on and then bolt the brake , would have to be really spaced correct with out the bracket
Question:	Will this work with 10” drums from a hydraulic surge system
Answer:	As long as it has a five hole brake flange.

Product features

Southwest Wheel 10" X 2-1/4" Trailer Electric Brake Assembly (1 Right + 1 Left)

• Pair of 10" x 2.25" TruRdye electric trailer brake assemblies with parts.
• 4 Hole mounting, comes with mounting bolts, nuts, and lock washers
• For Alko, Dexter, Quality, or other popular trailer axle manufacturers.
• TruRyde Brakes
• TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

Hardware Included

Hardware Included:

• 8 x 7/16" Lock Washers
• 8 x 7/16" Fine Hex Nut

4-Hole Mounting

Fits: Alko, Dexter, Quality, or other popular trailer axle manufacturers.

• 4" (center of stud to opposite center of stud)
• 2-7/8" (from center of stud to next center of stud)

Truryde Inspected

TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.Backing plates are CSA compliant. SAE rated friction material. Magnets tested 100% for pull force and conductivity.

Fully Assembeled

These are fully assembled backing plates with shoes, springs, and magnets attached and ready to be mounted.

The pair includes one left hand and one right hand brake assembly.

• Pair of 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)
• Pair of 10" x 2 1/4" TruRyde electric backing plates
• Works with Al-Ko, Dexter, Lippert, and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
• Comes with TruRyde bearings, seals, lug nuts, open and closed grease caps, cotter pins, spindle washers, tang washers, spindle nuts, and brake mounting washers and nuts
• Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649)

User questions & answers

Question:	How do I determine what size I need
Answer:	The hub face will not change by adding brakes, it will be the same as your idler hub.
Question:	My trailer bolt pattern is 5 on 5. Will this work
Answer:	Not positive, but believe they were.
Question:	hello , is this model self adjusting
Answer:	There could be a dozen reasons for this? Assuming everything worked correctly before the install? The brakes may take a few trips “around the block” to expand to the point where they are grabbing sufficiently. You could jack up one side of the trailer axle and have someone apply the brakes in vehicle and see if it is grabbing the trailer wheel?
Question:	Whats the center bore on these. I want to use bearing buddy. Will they fit
Answer:	Yes they work on my escourt trailer with dual wheel (4) for my bayliner 2352 capri

Product features

Southwest Wheel 3,500 lbs. Trailer Axle Electric Brake Kit 5-4.5" Bolt Circle

10" Electric Trailer Brake Kit for utility trailers, travel trailers, horse trailer, motorcycle trailers, and more. Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, brake mounting washers and nuts, a pair of 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud), and a pair of 10" x 2 1/4" TruRyde electric backing plates. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory. All studs are 1/2"-20 with yellow finished zinc plating. Hubs are chemically cleaned and painted black in electrostatic booth. Backing plates are CSA compliant. SAE rated friction material. Magnets tested 100% for pull force and conductivity. Comes with Southwest Wheel bolt circle guide to insure you received the correct bolt circle.

Pair of 5-4.5" Trailer Drums

Pair of TruRyde 10" x 2 1/4" 5-5" bolt circle hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)

Pair of 10" electric brakes

Pair of TruRyde 10" x 2 1/4" electric backing plates including mounting hardware.

Accessories included

Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts

The complete 5-4.5" trailer brake kit

Works with Al-Ko, Dexter, Lippert, Quality, and Rockwell Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory. Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649)

Product description

5 storable setting options with preferences of multiple drivers, and for pulling different trailers up to 4 axles. A flashing red warning system alerts user to No Trailer Brake situations.

• A distinct, easy-to-read LCD display with multiple screen color options, displays in English, French or Spanish
• Diagnostics show output current, battery, brake, and output voltage and warning system alerts to No Trailer Brake situations
• Boost feature allows for different levels of customized braking, select Electric over Hydraulic or Electric trailer brake mode
• Integrated Plug-N-Play port for 2-plug adapters and Snap-in mounting clip allows user to remove and store the control when not in use
• Compact, dash-hugging design. Electric trailer brake control for up to 4 braking axles.

User questions & answers

Question:	Does this fit a 2013 ram 3500 slt
Answer:	The CURT applies trailer brakes in accordance with vehicle deceleration. Built in accelerometers sense deceleration and apply trailer brakes according to the amount of deceleration. Small speed changes, letting off the gas etc, may not be enough to actuate trailer brakes. I have used cruise control, normal, with no interference or tugging from trailer brakes as speed is increased and decreased by the cruise control. This is based on my use experience only.
Question:	According to the wiring diagrams the controller is powered directly from the battery. Is the unit then powered all the time
Answer:	You would need to run a 12 volt 30-40 amp fused auxillary feed and a 30-40 amp ground line to the 7pin.
Question:	do the brakes engage when backing up
Answer:	Yes. Since Echo is not hardwired to a singular vehicle, it can be used in that environment. Note: the current product warranty does not cover commercial use, so keep that in mind.
Question:	does this come with any plut/pigtail for wiring into vehicle system
Answer:	No, my tacoma’s 7-pin is rotated 90° clockwise and it works fine.

Product description

General duty 10" x 2-1/4" Trailer Electric Brake Assembly that works with 3,500 lbs. Al-Ko, Dexter, Lippert, Rockwell and Quality Trailer Axles. These brakes are rated for 3,500 lbs and have a 4-bolt mounting flange bolt pattern. Manual adjustment is required and adjuster plugs are included. This product is compatible with most manufacturers and comes with a limited 1-year warranty. One left brake. (2 left and 2 right)

• General duty 10" x 2-1/4" Trailer Electric Brake Assembly that works with 3,500 lbs. Al-Ko, Dexter(K23-026-00&K23-027-00), Lippert, Rockwell and Quality Trailer Axles
• Dimensions: 10” diameter x 2-1/4” wide, 4” bolt circle, 3” center hole diameter
• 4 Hole Mounting. Comes with mounting nuts and lock washers
• 2 left hand side and 2 right hand side
• Limited 1-year warranty

User questions & answers

Question:	Lippert 4400# axle will these work
Answer:	I'm not sure if they will work for you. It would make sense to contact the manufacturer to determine that.
Question:	how to determine which ones are the right and which are the left? They all look the same
Answer:	They are not actual Electrolux brand bags but they fit my vacuum perfectly and work great!

Product description

Black Steel Construction. Fits wheels 15" & Larger. Axle size 5200-7000lb. Wheel Bolt Pattern 6 lug or 8 lug". Fits Spindle Size #42. 12" 6 lug or 8 lug" Steel Drum. Driver's and Passenger's Side. Works with Al-Ko, Dexter, Lippert and Quality Trailer Axles. Magnet, Pads, Springs, Complete. Adjustable Brakes.

• Dexter Style Backing Plate
• Axle Size - 5200-7000lb
• Brake Flange - 5 Bolt
• Fits Spindle - #42
• eCustomhitch Carries a Variety of Electric and Hydraulic Trailer Brake Parts

User questions & answers

Question:	Are these brakes made in america
Answer:	yes they will work. assuming they are 10 inch hubs.
Question:	I want to convert from hydraulic 12" brakes to electric. Will these work with the 12" brake drums from my hydraulic brakes (Dexter 7k axles
Answer:	They come as an enclosed unit complete with the lugs and Wheel nuts You need to adjust the brakes after installation.
Question:	Can you sell me a set of
Answer:	Our axles we're 4 bolt square on the end and these backing plates had the same bolt pattern. Not sure about your brand AL-KO
Question:	i need to know if there is wire kook up on the brakes ,they have two black wire and trailer has 1 red & 1 white wire
Answer:	I would say yeah,they are all pretty universal

Product description

TruRyde 12" Self Adjusting Electric Trailer Brake Kit for utility trailers, travel trailers, horse trailer, motorcycle trailers, and more. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory. All studs are 1/2"-20 with yellow finished zinc plating. Hubs are chemically cleaned and painted black in electrostatic booth. Backing plates are CSA compliant. SAE rated friction material. Magnets tested 100% for pull force and conductivity.

• Pair of TruRyde 12" x 2" 6-5.5" bolt circle hub and drums 25580 inner bearing 15123 outer bearing
• Pair of TruRyde 12" x 2" self adjusting electric backing plates
• Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
• Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts
• Built for 42 spindles with a 5 hole brake flange

User questions & answers

Question:	Lug nut size
Answer:	Best thing to do is check your bearings and see if they are the same number. The number is stamped on the side of them. If the numbers match then you should be good to go.
Question:	Will these fit 15 inch rims
Answer:	Yes.
Question:	I have a 20x8.5' diamond cargo enclosed utility trailer with dual 5200 lb axles. are these compatible parts with those models
Answer:	yes, these should fit the LIPPERT (LCI) 4400# axles
Question:	The outer bearing on my 5200 axle right now has a number of LM67048 will that interchange
Answer:	In this picture they are all the same but when you get them they are marked left and right

• 2 x trailer 5 on 4.5" hub drum kits + 2 x 10"x2-1/4" electric brakes for Dexter and other brands 3,500 lbs trailer axle
• Drum Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed, Ref part #. 008-247-05, 84546
• Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread
• Also include: one left + one right 10"x2-1/4" electric brakes with 3" center bore and 4" mounting bolts circle diamter

User questions & answers

Question:	Will a standard Bearing buddy (1.98") work with these
Answer:	If you need 2 inch brakes there the same. Not sure about the part number
Question:	Do these come with the backing plate mounting hardware or what size nuts and bolts are needed
Answer:	Yes. The assemblies are available on Amazon or etrailer dot com, but etrailer is more expensive.
Question:	Will this fit AL-KO axles
Answer:	The trailer brakes are NOT self adjusting, unlike most drum brakes on cars and trucks. There is however some "give" with an electric braking system on trailers. The adjustment is pretty simple and need to be done when installed and periodically thereafter. To Adjust: the bottom side of the drum brakes between the brake shoes you should see the "Adjuster" with a spring between the two shoes- This screwed wheel is your adjuster. It will need to be manually adjusted on install- to do that remove the rubber plug on the back side of the Backing plate and using a large flat tip screw driver or brake show adjuster tool and rotate while spinning the Drum until it stops the drum. Then Back the adjuster off just a little until the drum spins easily again. Replace the rubber plug. Do this for all Electric Brake units.
Question:	Will this fit a Tractor Supply Company 3500lb axle
Answer:	My axle was a 12” hub by 2” wide brake pads. The brake housing has a center hole that you need to measure along with how many nuts that it takes to mount. Mine took 5 some take 4. As you look for the new brake assembly you will need to know the details to make sure you get the correct brake assembly. Hope that helps you.

Product description

New premium quality OE 10" x 2-1/4" electric trailer brake assembly for most 3,500 lbs trailer axle in the market. This listing is for 2 brakes, 1 right + 1 left, replacement for one axle. LH assembly exchange with Dexter brake # 023-026-00 RH assembly exchange with Dexter brake # 023-027-00 These brakes are from our warehouse stock, which we wholesale to US trailer axle manufactures as OE parts

• Premium LIBRA brand OE 10" x 2-1/4" electric trailer brake assemblies (1 left + 1 right) for one axle
• works with most 3,500 lbs trailer axles in the market
• Center Hole Diameter: 3", 4 holes mounting, bolt circle diameter: 4", mounting bolts installed, no nuts included
• Exchange with Dexter brake # 023-026-00/023-027-00

User questions & answers

Question:	Are these Left and Right specific
Answer:	no this is for a trailor
Question:	Do brake adjuster plugs come with
Answer:	You will have to connect the new brake(s) magnet(s) i cut the old brakes wires and connected the new ones ..i used wired connectors and heat shrink tube to seal them...on my unig it doesn't matter wich color goes where...one is ground and the other is positive...i hope that answer your quetion...good luck
Question:	About this item fit this fits your 2002 lexus rx300 notes: fits awd models only
Answer:	They are 1/2"-20
Question:	Do you have to splice the wires? My old brake wires are attached to 2 small studs on the back, where I bolt down the trailer wires (1 blck, 1 yellow
Answer:	Yes a 15" rim will fit these drums

Product description

TruRyde 12" Self Adjusting Electric Trailer Brake Kit for utility trailers, travel trailers, horse trailer, motorcycle trailers, and more. Comes complete with inner bearing, outer bearing, both 2 1/4" id and 2 1/8" seals, solid grease caps, lube grease caps, cotter pins, spindle nuts, spindle washers, tang washers, lug nuts, backing plate mounting bolts, washers and nuts. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory. All studs are 1/2"-20 with yellow finished zinc plating. Hubs are chemically cleaned and painted black in electrostatic booth. Backing plates are CSA compliant. SAE rated friction material. Magnets tested 100% for pull force and conductivity.

• Pair of TruRyde 12" x 2" 8-6.5" bolt circle hub and drums 25580 inner bearing 14125A outer bearing
• Pair of TruRyde 12" x 2" self adjusting electric backing plates
• Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
• Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts
• Built for 42 spindles with a 5 hole brake flange

User questions & answers

Question:	I need 9/16 luggage
Answer:	I put these on my 2013 342 Fuzion. It has 7000 pound axles. I do not know what the serial numbers are though. They fit and work perfectly on my Fuzion
Question:	Can I use these self-adjusting brakes if my original brakes were not self-adjusting
Answer:	That's the axle I put them on. Straight bolt up. No modifications required. Got about 8,000 miles on the trailer so far no issues.
Question:	will these fit a 7000# lippert components axle Serial
Answer:	Yes they are left and right. This why they sell as a pair.
Question:	Will these fit dexter 7000# axle
Answer:	No

• Pair of 12" x 2" TruRyde electric brake assemblies with parts
• 5 Hole Mounting. Comes with mounting bolts, nuts, and lock washers
• Works with 5,200 lbs., 6,000 lbs., and 7,000 lbs. Al-Ko, Dexter, Lippert and Quality Trailer Axles
• Geniune TruRyde Brakes
• TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

User questions & answers

Question:	Will these fit the 42mm nev r lube axles
Answer:	You will need to match your bearing numbers and make sure you have a four hole brake flange. The bolt circle is measured from center of stud to the next center of stud 4.5" = 2 5/8".
Question:	What is the inside hole diameter
Answer:	This a 4.5" bolt circle, there is a 5" bolt circle kit available. If you have a 4.5" bolt circle wheel it will work.
Question:	What is the center hole diameter? Can the backing plate be welded onto the axle
Answer:	This kit is not self adjusting, but we do have this option available.
Question:	will this work on homemade utility trailer with dexter mobile home axles and brakes
Answer:	The bearing buddy will be 1.980". If you use these pressure greasers, you will need to install the inner grease seal backwards or can blow the seal out. allowing water and dirt (mud) to enter the bearing case or cause grease to enter brake shoe compartment. The best thing to do is "Maintenance". Once a year inspect your brake shoes and drums, then regrease your bearings. Short cuts almost always cause more work and cost more money. Grease on brake parts means new brake parts are in your future..

Product features

Southwest Wheel New 12" X 2" TruRyde Trailer Electric Brake Assembly (1 Right + 1 Left)

Southwest Wheel New 12" X 2" TruRyde Trailer Electric Brake Assembly (1 Right + 1 Left)

• Pair of 12" x 2" TruRyde electric brake assemblies with parts
• 5 Hole Mounting. Comes with mounting bolts, nuts, and lock washers
• Works with 5,200 lbs., 6,000 lbs., and 7,000 lbs. Al-Ko, Dexter, Lippert and Quality Trailer Axles
• Geniune TruRyde Brakes
• TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

Hardware Included

Hardware Included :

• 10 x 3/8" Mounting Stud
• 10 x 38" Lock Washer
• 10 x 3/8"-24 Hex Fine Nut

Truryde Inspected

TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.Backing plates are CSA compliant. SAE rated friction material. Magnets tested 100% for pull force and conductivity.

Fit's Popular Axles

• 5 Hole Mounting
• Works with 5,200 lbs., 6,000 lbs., and 7,000 lbs. Al-Ko, Dexter, Lippert and Quality Trailer Axles
• Geniune TruRyde Brakes

Fully Assembeled

These are fully assembled backing plates with shoes, springs, and magnets attached and ready to be mounted.

The pair includes one left hand and one right hand brake assembly.

Product description

12" Electric Trailer Brake Kit for utility trailers, travel trailers, horse trailer, motorcycle trailers, and more. Comes with bearings, 2.25" ID seals, 2.125" ID seals, lug nuts, solid grease caps, ez lube grease caps, cotter pins, spindle washers, tang washers, spindle nuts, and brake mounting washers and nuts by TruRyde. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory. All studs are 1/2"-20 with yellow finished zinc plating. Hubs are chemically cleaned and painted black in electrostatic booth. Backing plates are CSA compliant. SAE rated friction material. Magnets tested 100% for pull force and conductivity.

• Pair of 12" x 2" 6-5.5" bolt circle TruRyde hub and drums 25580 inner bearing 15123 outer bearing
• Pair of 12" x 2" TruRyde electric backing plates
• Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
• Comes with bearings, 2.25" ID seals, 2.125" ID seals, lug nuts, solid grease caps, ez lube grease caps, cotter pins, spindle washers, tang washers, spindle nuts, and brake mounting washers and nuts
• Built for 42 spindles with a 5 hole brake flange

User questions & answers

Question:	Will the outer bearing be compatible with bearing number A6? The inner bearing i have matches what you have listed I’m just curious about the outer
Answer:	Yes.
Question:	Can you use spring loaded grease caps
Answer:	We do not have a kit if your brake flange is 4 hole. Confirm your bearing numbers to make sure you do not have a 3,500 lbs. axle.
Question:	Will this brake assembly fit al-ko part number 363233.1/2. 6 lug 12"x2" full assembly (363236 drum al-ko part number
Answer:	Drums should almost always be replaced on electric brakes, as a 30 year service manager in the business I can tell you this with certainty
Question:	my axle matches everything about this kit in part number, but my mount flange is only 4 bolt on both axles do you have a different kit I don’t see
Answer:	Yes. These brakes fit Dexter 10k axles.
Question:	Will these fit dexter 10k axles on big tex gooseneck? will i need to replace the drums or can i use the old
Answer:	These are for the dually trailer axles. I think they're (the pads) 3 1/4" wide but they need all 8 bolts to mount with. That's what is your stopping strength!!! Hope this helps
Question:	Will these fit dexter 10k axles on a gatormade 40ft gooseneck
Answer:	Sorry, these brakes cannot be substituted for Al-Ko's 6-hole mount 10k brakes. We currently do not offer Al-Ko's 6-hole mount 10k brakes either.
Question:	Will these work on a 8,000 lb Lippert axle with a 4 mounting bolt pattern
Answer:	This kit has 1/2".
Question:	al ko 6 hole mount available for 10k
Answer:	Yes.

Product description

New premium quality OE 12" x 2" electric trailer brake assembly for most 5,200 - 7,000 lbs trailer axle in the market This listing is for 2 brakes, 1 right + 1 left, replacement for one axle LH assembly exchange with Dexter brake # K23-180-00 RH assembly exchange with Dexter brake # K23-181-00 These brakes are from our warehouse stock, which we wholesale to US trailer axle manufactures as OE parts Please email to: [email protected] for any questions.

• Premium OE 12" x 2" electric trailer brake assemblies (1 left + 1 right) for one axle
• works with most 5,200 - 7,000 lbs trailer axles in the market
• Center Hole Diameter: 3-1/4", 5 holes mounting,
• Exchange with Dexter brake # 023-180-00/023-181-00

User questions & answers

Question:	Are yhis self adjusting
Answer:	These are for a 7000 # axle it depends on what size axle you have and brake drums
Question:	it says these replace kelsey hays 12x2 five hole will it bolt up to the same flange or does it need a dextor flange
Answer:	It's mild steel. I guess you could weld it on. It comes with pre drilled holes so you could perhaps drill your flange on the axle. Or if the backing plate is the same you could swap over the assembly
Question:	I have a 12" 5-hole Dexter single axle/wheel system on a 10'x77" trailer. Will this brake assembly fit or must I find a smaller diameter assembly
Answer:	Not sure what the A6 crosses to, but this hub drum will replace a drum using an outer bearing using LM67048 or 15123 and an inner bearing 25580. This is considered the heavy duty version.
Question:	I have an older mobile home axle with a welded on brake assembly which I can grind off. Can I weld these brake assemblies on to the axle shaft
Answer:	You can, but I wouldn’t, unless you want grease leaking out and getting on the brake shoes.