13 best sound deadeners
Sound deadeners, often referred to as automotive soundproofing or automotive sound insulation, are materials or products used in vehicles to reduce noise and vibrations. They are an essential part of creating a quieter and more comfortable interior in automobiles. Here are some key points about sound deadeners in the context of automotive applications:
Purpose: The primary purpose of automotive sound deadeners is to minimize and absorb the noise and vibrations that enter the vehicle's interior. This helps create a quieter and more enjoyable driving experience.
Types of Noise: Sound deadeners target various types of noise, including road noise (tire and road surface noise), engine noise, wind noise, and external environmental sounds.
Materials: Sound deadening materials can vary but commonly include products like mass-loaded vinyl, acoustic foam, butyl rubber, and asphalt-based materials. These materials are chosen for their ability to absorb or block sound waves.
Installation Locations: Automotive sound deadeners can be installed in various locations within a vehicle, including the doors, floor, roof, trunk, and wheel wells. The specific installation points depend on the type and purpose of the sound deadening material.
Benefits: The installation of sound deadeners in a vehicle can lead to several benefits, including improved audio quality in the cabin, reduced fatigue for the driver and passengers on long drives, and enhanced overall comfort.
Soundproofing Kits: Some companies offer soundproofing kits specifically designed for certain vehicle models or types. These kits often include pre-cut sheets of soundproofing material and instructions for DIY installation.
Installation Process: Installing automotive sound deadeners typically involves cleaning and preparing the surfaces, cutting and applying the material to the desired areas, and ensuring a tight, secure fit. It's essential to follow the manufacturer's instructions for proper installation.
Sound Barrier vs. Sound Absorption: Sound deadeners can serve as both sound barriers and sound absorbers.Sound barriers block sound waves from entering the vehicle, while sound absorbers convert sound energy into heat.
Aftermarket Upgrades: Many car enthusiasts and owners choose to add aftermarket sound deadeners to their vehicles to enhance the acoustic performance and reduce unwanted noise. This can be especially common in high-end or luxury cars.
Cost: The cost of sound deadening materials and installation can vary widely based on the type and quality of materials used, the size and type of the vehicle, and whether it's a DIY project or done by a professional.
In summary, automotive sound deadeners are materials and products used to reduce noise and vibrations in vehicles, making the driving experience quieter and more comfortable. They come in various forms and are often installed in key areas of the vehicle to minimize the intrusion of external noise sources into the cabin.
Below you can find our editor's choice of the best sound deadeners on the market
Kilmat 50 mil 50 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
- The cost effective 50 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now everyone can easily eliminate the annoying road noise in the vehicle. We've designed the product that pretty efficiently handles the rattle and reduces noise while being affordable to almost everyone. Kilmat would deaden the entire car for the same money that would be enough to only insulate the doors using the expensive brands material.
- Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.35 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 50 mil thickness material. KILMAT 50 mil is light weighted sound deadening material!
- Car insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 50 mil; Total coverage area of 50 sq.feet; Number of sheets in the stack 47; Nominal sheet Size 9.8x15.7 inch. Roller is not included.
User questions & answers
| Question: | I want to use it under the headliner of the car. should i use some adhesive to apply this product kilmat to the ceiling? it would go a headlined over |
| Answer: | Kilmat 50 mil material is self adhesive, there is no need for additional adhesive to be applied to install it to the roof of a car, It's important to clean, dry and degrease a metal surface prior to installation of Kilmat 50 mil to it. Make sure to thoroughly press it down to the metal surface with a roller until the special embossment on the foil is plain and smooth. |
| Question: | What is R valuer |
| Answer: | i'm no expert. I would venture to say between 5 and 8 R value |
| Question: | What's the R value |
| Answer: | Yeah almost nothing. Found out the hard way. I saw peoole saying it's used for thermal insulation also. Did most of my van with other stuff there rely good but decided to giveth the last 20 percent worth this. And when I step on it like steering in the metal. No difference. |
| Question: | For application to underside of car hood, should I also use a spray adhesive |
| Answer: | There should not be a problem adhering Kilmat 50 mil to the underside of the hood without using additional spray adhesive, thus we do not recommend any additional spray adhesives. Make sure to clean and degrease the surface prior to installation. |
Noico 80 mil 36 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
Noico Solutions
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
- Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 36 sq.feet; Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 29.5x19.5 inch. Roller is not included
User questions & answers
| Question: | How many sheets come with the 36sq kit? I do see they are 20x |
| Answer: | Not only that it has SSD mounts but it is really easy to use them. They slide in and out of the case and can be locked into place. You simply slide the mount out of the case, install the SSD, then slide the mount back in and lock it. This is a really nice case. |
| Question: | How effective is this to reduce vibrations |
| Answer: | the case is deeper than it is tall. |
| Question: | Will this product help with the high pitched noise from tires on the highway |
| Answer: | No but you can purchse a 2.5'' media card reader front panel adapter for ~$25 which will fit and works just as well. |
| Question: | I have a portable air conditioner that is really loud. If i wrap the unit with this will it quiet down |
| Answer: | It should, especially if you do not mount a side fan. The case has a particularly wide clearance because its side panels flare out. It probably has more clearance than most.I installed a Hyper 212 EVO in one. |
Noico 80 mil 10 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
- Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 10 sq.feet; Number of sheets in the stack 10 (sheets are folded); Nominal sheet Size 14,5x10 inch. Roller is not included.
User questions & answers
| Question: | does the entire floor needs to covered for this to be effective |
| Answer: | I believe all PC case fans run on 12 volts |
| Question: | Can headliner be applied on top of this |
| Answer: | Yrs |
| Question: | Notice any smell or odor |
| Answer: | Mine (the 101 model) did *NOT* come with any screws. Fortunately I have a box of loose screws at work... |
| Question: | Can i use this on a wooden door at home? How many do i need |
| Answer: | I am not using Cooler Master, but corsair H110 (also 280mm cooler). It fits on the top, except one problem: Water pipe clearance is small and I decided to move DVD drive to external one. If you do not mind bending the water pipe, it fits, but I am not so happy about the fact that water pipe touches the dvd drive. |
Dynamat 10455 18" x 32" x 0.067" Thick Self-Adhesive Sound Deadener with Xtreme Bulk Pack, (Set of 9)
Dynamat
Product description
QUALITY ASSURED.
- Country of origin : United States
- Model Number : 10455
- Package Weight : 23 pounds
- Package Dimensions : 21" L x 12" W x 3" H
User questions & answers
| Question: | how many boxes wil i need for a 1957 ford fairlane 500. I want to do complete floor and trunk as well as headliner doors and inside finder in trunk ar |
| Answer: | Number of sheets in the stack 9Sheet Size 29x20 inchTotal coverage area of 36 sq.feetPack 36 sqft has two times more sheets in size than a pack of 18 sqft |
| Question: | I have a carrier comfort apu 2 cylinder kubota diesel generator mounted to the side of my big rig approximately 95 decimals how much reduction |
| Answer: | If you look to eliminate the road, engine noise and metal vibrations then Noico 80 mil material is the way to go. You are to install Noico 80 mil to such key areas, as floorboards, doors, firewall, roof, trunk + trunk lid, rear deck. We recommend to carefully prepare the metal surface before installation of deadener to it. That would include thoroughly cleaning, drying and degreasing the metal surface before installing the sound deadening to it. You are also to firmly roll down the sound deadening mats to the metal surface with aid of roller. *Ambient temperature upon installation should be not less than 60 degrees F. If a temperature is lower than 60 degrees F then you are to preheat both, metal surface and even deadening pads up to 60 degrees F. That will largely enhance an adhesion and overall effect. |
| Question: | Is this enough for 1980 camaro floor? if i isolating the whole car (t tops) how many of that do i need |
| Answer: | Insulating the wheel wells, floorboards, firewall and doors would certainly decrease the high pitch noise but it won't totally cancel that. It appears that the source is tyres themselves. Sound deadening works more towards low frequency resonance elimination. Please note that all of our sound deadening materials are to be installed from the interior side only. |
| Question: | CHEN: Does this package come with enough to do my whole car? 2012 Hyundai Santa Fe ？How much package |
| Answer: | Unfortunately Noico 80 mil wont work in this case because the noise is caused by the fan movement and it is actually a flow of air that you get to hear and it can't be remedied with this material. |
MAT66 ProBlack 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and Dampening
MAT 66
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Mat66 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Mat66 sound deadening mat has a total weight of 0.5 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Mat66 80 mil is light weighted sound deadening material!
- Car insulation Mat66 has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 36 sq.feet; Number of sheets in the stack 34; Nominal sheet Size 15.7x9.8 inch. Roller is not included.
User questions & answers
| Question: | Does this product contain Asphalt |
| Answer: | We recommend covering the entire floor for it to be the most effective and double layer on the wheel wells. |
| Question: | Will it stick to plastic of a UTV |
| Answer: | Yes, you can install a headliner on top of Noico 80 mil 10 sqft material. |
| Question: | Does this come with the tool to roll on |
| Answer: | No smell or odor other than the initial opening of the package, I did however allow a day for it to dissipate before installing (has been installed for 30+ days in FL sun). Use caution when installing as mix will come out the edges & stick to roller. Use metal tape to seal edges. |
| Question: | How come what i just ordered was nothing like it was before i ordered 2 packs but this stuff is definitly not 80mil and there was no where near 36sqft |
| Answer: | Yes it should stick just fine as long as you make sure it's clean and free of debris. I'd guess 2 packs would be pretty close for 1 door (20 sq ft total) |
Dynamat 10435 12" x 36" x 0.067" Thick Self-Adhesive Sound Deadener with Xtreme Door Kit
Dynamat
Product description
Stop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts! Apply Dynamat Xtreme to your vehicles resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective, requires no heat to apply and is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Why does your car stereo sound louder when you pull off the freeway and come to a stop? Road noise steals much of the listenable portion of your music. At 70 mph, a typical automotive noise level of 85 dB leaves you with only 20 dB of listenable music. Applying Dynamat creates a "sonic barrier" restoring 3, 6, even 12 dB of lost dynamic range. Gaining just 3 dB doubles your effective amplifier power. And that means you hear more music. Kit contains four 12" x 36" (305mm x 914mm) pieces of Dynamat Xtreme and includes enough material for two standard size doors.
- This kit contains four 12"x36" pieces and includes enough material for two standard size doors
User questions & answers
| Question: | Will it stick to wood surface and metal surface |
| Answer: | It's 36 square feet. 36 - '1 foot by 1 foot' sections. Measure it. It depends on how well your going to cover everything. I covered every square inch of my vehicle including wheel wells, under carpet, rear hatch, 2 layers on the doors, and my hood and used 3 bulk kits. Didn't get to do my headliner and that would probably be 1/2 kit or a little more. You could also get away with just covering large open areas and use less. If I were you get 3 or 4 and you can do your fenders and hood too. |
| Question: | Hi, Is this the original silver version or the new black |
| Answer: | Normal Dynamat Xtreme will help reduce resonance of the metal. However, it will not really stop the low frequency pulses that the Kubota will generate. If you want to try blocking this type of noise, you are better off using the the Dynapad product and line all the floors and walls of your cab. The Dynapad does not have self-adhesive side, so you will have to use some kind of glue or adhesive to apply it to the vertical walls. However, this is likely the best you can do inside a vehicle. It's 3/8" thick and pretty heavy weight. If you don't want to do this, you can try the 1/2" Dynaliner, which does have an adhesive sticker backing and it's lighter, but will not block as much low frequency pulses. |
| Question: | can you use this on your exhaust muffler |
| Answer: | I used 2 boxes to do the whole floor , all 4 doors and the back of the cab in an Ford. F 350 truck |
| Question: | I have a Gas Club Car Carryall (Golf Cart)....My question: Would this Thermo-Tec be of much use to dampen/deaden the engine sound from my golf cart? I am considering placing some under the bed of the rear of the golf cart, under the front seats, and even possibly the floor board of the golf cart. Would this work good |
| Answer: | I also have a 2012 Hyundai Santa Fe and it was enough to cover all four doors, the tailgate and a few extra small places...you definitely would need 2-3 boxes to cover everything...But also keep in mind, you only need roughly 25% surface area coverage to be effective. No need to over do it! (2 boxes would probably be enough)You can check out sounddeadenershowdown dot com for a better explanation! |
Noico Black 80 Mil 36 Sq Ft Car Sound Deadening, butyl automotive deadener restoration mat and Noise dampening insulation
Noico Solutions
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico Black 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico Black 80 mil is full weighted sound deadening material!
- Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 36 sq.feet; Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 29.5x19.5 inch. Roller is not included.
User questions & answers
| Question: | Is this flexible? I want to install it on the floor of a cargo van. The floor has ridges about every inch and a half. Would it go in the groves |
| Answer: | This sound deadening material is made on a butyl rubber base and does not contain any asphalt or petroleum. It does not have an asphalt smell. All of our products are non-hazardous ones and not dangerous. |
| Question: | can this mat be used for under the hood and is it safe |
| Answer: | Yes, this material will stick to plastic. There should be no problem. The surface is to be pre-cleaned and degreased prior to installation. Each sheet of the material is to be thoroughly pressed to the surface with a roller. However, please note that our products are mainly designated to be installed from the interior side of a vehicle in order to perform its function and get substantial results. It is worth mentioning that UTV is a fairly difficult objective in terms of soundproofing. We doubt that application of any kind of sound deadening materials would bring about somewhat sensible results in comparison if it was installed to a regular car. The reason being is an open design of your UTV along with its engine arrangement. Another thing is that the material should not be installed to those areas of your UTV that are exposed to the elements (dirt or water). |
| Question: | Any difference between the silver and black or are they the same product jua different color |
| Answer: | In accordance with our offer, no roller is included into the box with MAT66 ProBlack 80 mil 36 sqft material. |
| Question: | I'm a bit confused as to how the thickness is rated. 80 mil? 80 millimeters? I'm getting 1 mm. Am I missing something |
| Answer: | Yes same experience., this particular brand was not a true 80 mill thickness. |
Sound Deadening mat 50 mil 52 sqft | Sound Deadener Mat | Car Sound Dampening material | Sound dampener | Sound deadening material sound Insulation | Car Sound deadening Bulk Kit Trunk Hood Door Mats
Siless
- ★ Siless VIBRO 50 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
- ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ Value - SILESS VIBRO Damping Material is just under $1.53 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- ★ SILESS VIBRO specifications — Thickness 50 mil, Coverage area 52 sqft, Number of sheets in the box 20, Each sheet size 23.6x15.94 inch. Installation instruction is included in the box.
User questions & answers
| Question: | Should you remove any existing insulation that is currently on the underside of the car hood or put this product on top of it |
| Answer: | Thank you for your question. It is not flame retardant, we would not recommend installing our products close to open flame. |
| Question: | Is this asphalt based |
| Answer: | Thank you for your question. It is 15.75 inches or 40 cm wide and 11.48 feet or 3.5 m long. |
| Question: | Do I need to pair this with any other siless mat in order to achieve good sound deadening |
| Answer: | Yes, you can use it in the inner panel of the hood. |
| Question: | Does this kit come with the roller |
| Answer: | I have the 1/2" gray and 1/2" black...textured 1 side only. |
FatMat Self-Adhesive Rattletrap Sound Deadener Bulk Pack with Install Kit - 50 Sq Ft x 80 mil Thick
Product description
FatMat Sound Deadener is made to absorb vibrations and noises that travel through it giving you a dramatic reduction in irritating noises. RattleTrap stops nasty rattles, eliminates vibrations, and reduces road noise, engine noise and exhaust noise in your ride. Improve audio quality, enhance bass, combats vibrational distortion. Applying FatMat Sound Deadener to quiet vibrations in your car can result in as much a 3 dB gain in sound. Patented "Super-Stick" pressure sensitive adhesive backing with heat-resistant aluminum surface. Lightening Fast Shipping! Toll Free Customer Support and Fast Email Support. 100% Satisfaction Guaranteed!
- One 18 inch wide x 33.5 feet long Roll of Self-Adhesive RattleTrap (50 Sq Ft Total) with Install Kit Consisting of Easy Instructions, Knife, Roller, and FatMat Sound Control Decal
- 80 mil nominal thickness with Patented "Super-Stick" Adhesive
- Sound Deadening Acoustic Insulation for Automotive, Marine, Home, RV
- Hear more of the sound you want! Vibrational damper: reduces distortion, boosts bass. Uses range from personal enjoyment to extreme competitions such as dB Drag Racing.
- Pliable, easy to cut, heat-resistant aluminum coating. Keep Sound In, Noise Out - A Sound Decision!
User questions & answers
| Question: | Will installing this in the trunk and under the rear seats help with exhaust drone and road noise |
| Answer: | I haven't used it on wood. If it is clean I wouldn't hesitate to do that. The adhesive backing is very strong stuff. |
| Question: | Is this stuff really 3" thick |
| Answer: | Black |
| Question: | We are doing a kitchen remodel and I want to use this in the dishwasher box area and around the dishwasher to quiet it down even more. I have concern with the odor from out gassing and how much heat it can handle |
| Answer: | no, it may catch fire. Maybe you could add it on the inside above the muffler area. It would definitely help reduce the outside noise inside the vehicle. |
| Question: | may I use this on my window to isolate noise outside |
| Answer: | The material does add weight, buts its sound dampening appears quite good. A golf cart has less weight issues, it seems to me, than an automobile. It appears that you have a motorized golf cart with a 4 stroke engine (I am familair with the quiet electric carts) so I don't know if your results will be worthwhile. |
Noico 80 mil 18 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening…
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening mat has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
- Car insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 18 sq.feet; Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 19,5x15 inch. Roller is not included.
User questions & answers
| Question: | Can i put it in the inside of my engine bay? I have a jeep yj |
| Answer: | We do not recommend using this material for treatment of engine compartment except for using it as an application for the hood. The best solution would be the treatment of firewall and floor from interior side. |
| Question: | I am thinking of insulating my new dewalt contractor tablesaw would this product absorb the high pitch noise |
| Answer: | That's not how this product works. It adds mass to large vibrating panels. You want mass loaded vinyl with a closed cell foam decoupling layer. |
| Question: | Is this only for sound or could it be used as a heat barrier for under the hood |
| Answer: | Noico 80 mil is first of all sound and vibro insulation, it is also a heat barrier but to a much lesser extent.Specifically for heat insulation we recommend using special materials such as Dynamat Hood Liner or Noico Liner. But the greatest effect can be obtained when applying Noico 80 mil as the first layer and Hood Liner as the second one. |
| Question: | Why are the larger packs no longer available |
| Answer: | So you have to buy more smaller rolls at a higher price |
Siless 80 mil 36 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material (80 mil 36 sqft)
Siless
- ★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
- ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ Value - SILESS VIBRO Damping Material is just under $1.53 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- ★ SILESS VIBRO specifications — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area - 36 ft², Number of sheets in the box - 14, each sheet size - 23.6x15.94 inches. The installation instructions are included in the package but a roller isn't.
User questions & answers
| Question: | The chart shows I need 34sqft for a ram crew cab . Does that include inside the doors too? Also, the 36sqft says it has 14 sheets, is that correct |
| Answer: | Thank you for your question. Yes, the box of Siless Vibro 80 mil 36 sqft has 14 sheets in it. The chart shows that you would need 85 sqft a ram crew cab. 34 sqft would be enough to do doors. |
| Question: | is this made in china |
| Answer: | Thank you for your question. Unlike many sound deadening materials currently sold on Amazon from China and Russian Federation, Siless sound deadening mat made in Ukraine. |
| Question: | Could you use this to keep music room noise from bothering neighbors? Specifically, could you put it on a wall |
| Answer: | You could put it on walls. But as for suppressing noise from a neighbor, I don't think so. It's best to use acoustical tile for rooms. |
| Question: | Can this be used a a heat sheild for a Wood stove |
| Answer: | Thank you for your question. Siless 80 mil sound deadening mat is not recommended to be used as a heat shield for wood stove. |
Siless Liner 157 mil 36 sqft Sound Deadening mat - Sound Deadener Mat - Car Sound Dampening Material - Sound dampener - Sound deadening Material Sound Insulation - Car Sound deadening
- Closed Cell Foam: OIL and Waterproof LINER closed-cell polyethylene foam is the best for car, Siless with an adhesive layer 100% ensures optimum efficiency and thermal insulation that could be possibly gained. The price of 1 sqft of Siless Liner with similar characteristics is more then three times cheaper! Excellent quality for less money!!
- Heat Blocker and Vibration Deadener: Effectively blocks 98% of radiant heat transfer. Siless Liner is a very versatile insulation material with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensure your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant!
- Lightweight, Waterproof: It is a waterproof light-weight thermal deadener with highly compressible closed cell foam formulation, it absolutely doesn’t absorb moisture and has no odor, and it’s flexible which make it easy to install with or without roller.
- The operating temperature of the material is the same as of the rubber foam up to 215 degrees Fahrenheit.
- SILESS Liner specifications: Self-adhesive foam rolls (closed cell PE foam) with waterproof glue. Thickness 157 mil / 0.157 inches / 4mm. Number of rolls in the package - 1. Total coverage area - 36 ft². Each roll size - 15.74 x 330.7 inches.
User questions & answers
| Question: | Enough for 4 doors |
| Answer: | |
| Question: | What color is the exposed side |
| Answer: | |
| Question: | How does this compare to noico products? Seem pretty close in product |
| Answer: | |
| Question: | What is the width of the roll |
| Answer: |
Noico Black 80 mil 18 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and Dampening
- The cost effective 80 mil automotive butyl and foil sound deadening!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico Black 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs / 1 sqft (3.7kg / 1 sqm). This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil (2 mm) thickness material. Noico Black 80 mil (2 mm) is full weighted sound deadening material!
- Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you’ll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: nominal thickness 80 mil (2 mm); total coverage area of 18 sqft (1.7 sqm.); number of sheets in the stack 9 folded; nominal sheet size 19.5 x 15 inches (500 x 380 mm). Roller is not included.
User questions & answers
| Question: | What is the temp range of this material? Would it be advisable to put it on the hood or the underside of car (not near exhaust) under front seat area |
| Answer: | It's more flexible than most of the sound dampener have used. It should probably be pushed into crevices as small as a half inch. Anything smaller it will probably have to seal up above the grove. |
| Question: | What is the temp range of this material? Would it be advisable to put it on the hood or the underside of car (not near exhaust) under front seat area |
| Answer: | Noico Black 80 mil has a temperature limits of up to 200 degrees Fahrenheit and up to 400 degrees Fahrenheit only for a short term heating. You can install it under the hood if engine compartment temperature is within a mentioned specs. If not, we would then recommend looking for a hood solution (hood insulation) type of material and use Noico Black 80 mil material in combination with hood solution. The first layer that goes on a hood metal would be Noico Black 80 mil material. The second layer on top of Noico Black 80 would be hood solution type material. We are sorry, but we do not carry hood solution (hood insulation) materials. Please be note that Noico Black 80 mil is to be installed on a bare metal. Please note that all of our sound deadening materials are to be installed from the interior side. We recommend thoroughly cleaning, drying and degreasing a metal surface prior to installation of deadener to it. |
| Question: | Thinking about using this on a cj7 jeep. How water resistant is the product |
| Answer: | The only difference between silver and black 80 mil materials is the colour of the aluminum backing. All the technical specs and the installation methods are identical. |
| Question: | What's the difference between this black and the usual silver foil material |
| Answer: | 1 mil = 1 thousandth of an inch in thickness. Examples: Dime: 53 mils Credit Card: 30 mils 10 pieces of paper: 10 mils Plastic grocery bag: 2.25-3 mils These Noico butyl sheets are 80 "thousandths" of an inch or 0.08 inches thick. Its like 2 to 3 credit cards thick. Or roughly 80 sheets of loose note paper stacked tightly. |
Latest Reviews
View all
Budget 1080P Projector
- Updated: 04.02.2023
- Read reviews
Cap Barbell Cap Barbell Ab Benches
- Updated: 27.04.2023
- Read reviews
Pallet Busters
- Updated: 19.03.2023
- Read reviews
Urinal Screens
- Updated: 06.07.2023
- Read reviews
Ace Drills
- Updated: 18.06.2023
- Read reviews