12 best automotive sound deadeners
Automotive sound deadeners are materials and components used in vehicles to reduce noise, vibrations, and harshness (NVH) levels, thereby enhancing the overall driving experience and comfort for occupants. These materials are commonly employed in various parts of a vehicle, including the body, body trim, and replacement parts. Here is some information about automotive sound deadeners:
Purpose: The primary purpose of automotive sound deadeners is to reduce or dampen the noise and vibrations generated by the vehicle's engine, road, wind, and other sources. This improves the interior acoustics and minimizes the intrusion of unwanted noise.
Types of Materials: There are various materials used as sound deadeners in automobiles, including but not limited to:
- Acoustic Insulation: These materials are designed to block and absorb sound waves. Common options include foam, rubber, and mass-loaded vinyl.
- Vibration Dampeners: These materials reduce vibrations in vehicle panels and structures. They are often made of butyl rubber or asphalt-based compounds.
- Sound Absorbers: These materials are used to absorb sound energy rather than reflecting it. They typically have porous structures and can be found in headliners, door panels, and carpet padding.
- Sealing and Barrier Materials: These materials create a barrier to prevent sound transmission. Examples include automotive-grade foils and barriers.
Application Areas:
- Body Panels: Sound deadeners are applied to various body panels, such as doors, floors, and the firewall, to reduce road noise and vibrations.
- Body Trim: Inside the vehicle's cabin, sound deadening materials can be found in the headliner, door panels, and carpeting to enhance the acoustic comfort.
- Replacement Parts: Sound deadeners are also used in aftermarket parts to maintain or improve NVH characteristics when replacing original components.
Benefits:
- Reduced Noise: Automotive sound deadeners significantly reduce the noise level inside the vehicle, making for a quieter and more pleasant ride.
- Enhanced Comfort: Reduced vibrations and noise contribute to a more comfortable driving experience.
- Improved Audio Quality: In addition to reducing unwanted noise, sound deadeners can enhance the quality of in-car audio systems by minimizing interference.
Installation and Maintenance: Sound deadeners can be installed during the manufacturing of vehicles or as aftermarket additions.Proper installation is crucial for optimal performance. They require minimal maintenance but should be inspected for damage or deterioration over time.
Regulations and Standards: Automotive manufacturers must comply with various regulations and industry standards related to noise levels and emissions. Sound deadeners play a role in achieving these standards.
In summary, automotive sound deadeners are crucial components that help reduce noise and vibrations inside vehicles, enhancing the overall driving experience and comfort for occupants. They come in various forms and are applied to different parts of the vehicle, from body panels to interior trim, to effectively manage NVH levels.
Below you can find our editor's choice of the best automotive sound deadeners on the market
Noico 80 mil 36 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
Noico Solutions
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
- Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 36 sq.feet; Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 29.5x19.5 inch. Roller is not included
User questions & answers
| Question: | How many sheets come with the 36sq kit? I do see they are 20x |
| Answer: | Not only that it has SSD mounts but it is really easy to use them. They slide in and out of the case and can be locked into place. You simply slide the mount out of the case, install the SSD, then slide the mount back in and lock it. This is a really nice case. |
| Question: | How effective is this to reduce vibrations |
| Answer: | the case is deeper than it is tall. |
| Question: | Will this product help with the high pitched noise from tires on the highway |
| Answer: | No but you can purchse a 2.5'' media card reader front panel adapter for ~$25 which will fit and works just as well. |
| Question: | I have a portable air conditioner that is really loud. If i wrap the unit with this will it quiet down |
| Answer: | It should, especially if you do not mount a side fan. The case has a particularly wide clearance because its side panels flare out. It probably has more clearance than most.I installed a Hyper 212 EVO in one. |
Kilmat 50 mil 50 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
- The cost effective 50 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now everyone can easily eliminate the annoying road noise in the vehicle. We've designed the product that pretty efficiently handles the rattle and reduces noise while being affordable to almost everyone. Kilmat would deaden the entire car for the same money that would be enough to only insulate the doors using the expensive brands material.
- Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.35 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 50 mil thickness material. KILMAT 50 mil is light weighted sound deadening material!
- Car insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 50 mil; Total coverage area of 50 sq.feet; Number of sheets in the stack 47; Nominal sheet Size 9.8x15.7 inch. Roller is not included.
User questions & answers
| Question: | I want to use it under the headliner of the car. should i use some adhesive to apply this product kilmat to the ceiling? it would go a headlined over |
| Answer: | Kilmat 50 mil material is self adhesive, there is no need for additional adhesive to be applied to install it to the roof of a car, It's important to clean, dry and degrease a metal surface prior to installation of Kilmat 50 mil to it. Make sure to thoroughly press it down to the metal surface with a roller until the special embossment on the foil is plain and smooth. |
| Question: | What is R valuer |
| Answer: | i'm no expert. I would venture to say between 5 and 8 R value |
| Question: | What's the R value |
| Answer: | Yeah almost nothing. Found out the hard way. I saw peoole saying it's used for thermal insulation also. Did most of my van with other stuff there rely good but decided to giveth the last 20 percent worth this. And when I step on it like steering in the metal. No difference. |
| Question: | For application to underside of car hood, should I also use a spray adhesive |
| Answer: | There should not be a problem adhering Kilmat 50 mil to the underside of the hood without using additional spray adhesive, thus we do not recommend any additional spray adhesives. Make sure to clean and degrease the surface prior to installation. |
Amazon Basics Car Sound Deadener, 9.8″ x 15.7″ (34-Piece)
Product description
An Amazon Brand
- Car sound deadener (34-piece) for creating a quieter and more comfortable in-car experience
- Sound-proofing material (made of butyl rubber compound based substrate) helps reduce annoying vibrations and noises from the vehicle and road
- Strong self-adhesive backing for secure placement; reflective aluminum foil on the front for better thermal insulation
- Pliable material; easy to cut and install in a vehicle interior, cabin floor, or trunk; installation kit includes a roller, knife, and instructions
- Each piece measures 9.8 by 15.7 inches; 36-square-foot total coverage area; backed by an Amazon Basics 1-year limited warranty
User questions & answers
| Question: | Would this product work in door jams to reduce road noise |
| Answer: | Even though the description states it, no it does not come with a roller. I am not sure if the installation kit is seperate or if there is an error. |
| Question: | Where is this product manufactured |
| Answer: | 80 |
| Question: | Does it come with a roller |
| Answer: | No it comes in different sizes. I bought queen size. It fit great! |
| Question: | Is this 50 or 80 mil material |
| Answer: | the comforter seems very light in weight but it keeps us warm in minnesota .i cant say enough about this comforter,i would buy it again and again. |
Dynamat 10455 18" x 32" x 0.067" Thick Self-Adhesive Sound Deadener with Xtreme Bulk Pack, (Set of 9)
Dynamat
Product description
QUALITY ASSURED.
- Country of origin : United States
- Model Number : 10455
- Package Weight : 23 pounds
- Package Dimensions : 21" L x 12" W x 3" H
User questions & answers
| Question: | how many boxes wil i need for a 1957 ford fairlane 500. I want to do complete floor and trunk as well as headliner doors and inside finder in trunk ar |
| Answer: | Number of sheets in the stack 9Sheet Size 29x20 inchTotal coverage area of 36 sq.feetPack 36 sqft has two times more sheets in size than a pack of 18 sqft |
| Question: | I have a carrier comfort apu 2 cylinder kubota diesel generator mounted to the side of my big rig approximately 95 decimals how much reduction |
| Answer: | If you look to eliminate the road, engine noise and metal vibrations then Noico 80 mil material is the way to go. You are to install Noico 80 mil to such key areas, as floorboards, doors, firewall, roof, trunk + trunk lid, rear deck. We recommend to carefully prepare the metal surface before installation of deadener to it. That would include thoroughly cleaning, drying and degreasing the metal surface before installing the sound deadening to it. You are also to firmly roll down the sound deadening mats to the metal surface with aid of roller. *Ambient temperature upon installation should be not less than 60 degrees F. If a temperature is lower than 60 degrees F then you are to preheat both, metal surface and even deadening pads up to 60 degrees F. That will largely enhance an adhesion and overall effect. |
| Question: | Is this enough for 1980 camaro floor? if i isolating the whole car (t tops) how many of that do i need |
| Answer: | Insulating the wheel wells, floorboards, firewall and doors would certainly decrease the high pitch noise but it won't totally cancel that. It appears that the source is tyres themselves. Sound deadening works more towards low frequency resonance elimination. Please note that all of our sound deadening materials are to be installed from the interior side only. |
| Question: | CHEN: Does this package come with enough to do my whole car? 2012 Hyundai Santa Fe ？How much package |
| Answer: | Unfortunately Noico 80 mil wont work in this case because the noise is caused by the fan movement and it is actually a flow of air that you get to hear and it can't be remedied with this material. |
Dynamat 11103 Dynaliner 32" x 54" x 1/2" Thick Self-Adhesive Sound Deadener
Dynamat
Product description
QUALITY ASSURED
- Country of origin : United States
- Model : 11103
- Package Dimensions : 10.71" L x 5.29" W x 4.07" H
- Package weight : 3.8 pounds
User questions & answers
| Question: | I have a new, clean fuel tank that is tight but produces vibration noise at highway speeds, could this be applied to bottom or top of tank |
| Answer: | Yes. I put dynamat around a 4K generator in our rv. Sides,top and bottom. Did a great job not only deadening the noise but 2 years later, it’s still stuck on. Very impressed |
| Question: | Can it be used as a hoodliner |
| Answer: | Worked great, used it on my 1971 RoadRunner |
| Question: | Can this work on the inside of a sub box made out of aluminum, mdf is too thick for the space. Would half inch be thick enough? Thanks |
| Answer: | Yes, it will adhere to aluminum. It works best if you apply it in warm conditions. Make sure you Stick one edge down and then use a roller to apply the rest so you avoid trapping air bubbles. It will work on gentle curve but for hard corners, cut it and start a new sheet |
| Question: | does the thickness matter during the installation, as in can it be too thick I won't be able to put back the headliner |
| Answer: | We used this product in our 1957 Chevy and it was not too thick for the headliner. We used the 1/2 inch thickness |
Noico 80 mil 10 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
- Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 10 sq.feet; Number of sheets in the stack 10 (sheets are folded); Nominal sheet Size 14,5x10 inch. Roller is not included.
User questions & answers
| Question: | does the entire floor needs to covered for this to be effective |
| Answer: | I believe all PC case fans run on 12 volts |
| Question: | Can headliner be applied on top of this |
| Answer: | Yrs |
| Question: | Notice any smell or odor |
| Answer: | Mine (the 101 model) did *NOT* come with any screws. Fortunately I have a box of loose screws at work... |
| Question: | Can i use this on a wooden door at home? How many do i need |
| Answer: | I am not using Cooler Master, but corsair H110 (also 280mm cooler). It fits on the top, except one problem: Water pipe clearance is small and I decided to move DVD drive to external one. If you do not mind bending the water pipe, it fits, but I am not so happy about the fact that water pipe touches the dvd drive. |
Siless 80 mil 36 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material (80 mil 36 sqft)
Siless
- ★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
- ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ Value - SILESS VIBRO Damping Material is just under $1.53 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- ★ SILESS VIBRO specifications — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area - 36 ft², Number of sheets in the box - 14, each sheet size - 23.6x15.94 inches. The installation instructions are included in the package but a roller isn't.
User questions & answers
| Question: | The chart shows I need 34sqft for a ram crew cab . Does that include inside the doors too? Also, the 36sqft says it has 14 sheets, is that correct |
| Answer: | Thank you for your question. Yes, the box of Siless Vibro 80 mil 36 sqft has 14 sheets in it. The chart shows that you would need 85 sqft a ram crew cab. 34 sqft would be enough to do doors. |
| Question: | is this made in china |
| Answer: | Thank you for your question. Unlike many sound deadening materials currently sold on Amazon from China and Russian Federation, Siless sound deadening mat made in Ukraine. |
| Question: | Could you use this to keep music room noise from bothering neighbors? Specifically, could you put it on a wall |
| Answer: | You could put it on walls. But as for suppressing noise from a neighbor, I don't think so. It's best to use acoustical tile for rooms. |
| Question: | Can this be used a a heat sheild for a Wood stove |
| Answer: | Thank you for your question. Siless 80 mil sound deadening mat is not recommended to be used as a heat shield for wood stove. |
MAT66 ProBlack 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and Dampening
MAT 66
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Mat66 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Mat66 sound deadening mat has a total weight of 0.5 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Mat66 80 mil is light weighted sound deadening material!
- Car insulation Mat66 has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 36 sq.feet; Number of sheets in the stack 34; Nominal sheet Size 15.7x9.8 inch. Roller is not included.
User questions & answers
| Question: | Does this product contain Asphalt |
| Answer: | We recommend covering the entire floor for it to be the most effective and double layer on the wheel wells. |
| Question: | Will it stick to plastic of a UTV |
| Answer: | Yes, you can install a headliner on top of Noico 80 mil 10 sqft material. |
| Question: | Does this come with the tool to roll on |
| Answer: | No smell or odor other than the initial opening of the package, I did however allow a day for it to dissipate before installing (has been installed for 30+ days in FL sun). Use caution when installing as mix will come out the edges & stick to roller. Use metal tape to seal edges. |
| Question: | How come what i just ordered was nothing like it was before i ordered 2 packs but this stuff is definitly not 80mil and there was no where near 36sqft |
| Answer: | Yes it should stick just fine as long as you make sure it's clean and free of debris. I'd guess 2 packs would be pretty close for 1 door (20 sq ft total) |
Car Insulation - 4' x 10' Roll (40 Sqft) Sound Deadener & Heat Barrier Mat - Automotive Lightweight Thermal Insulation
Product description
Car insulation is the lightest & most effective thermal sound deadening insulation in the world! Our made in the USA product is an EXTREMELY light-weight sound deadener & thermal barrier that creates a quiet, comfortable, and efficient interior for any vehicle. Car Insulation will keep you cool in the summer by reflecting unwanted engine, header, exhaust, & summer heat. It will also keep you warm in the winter! It is extremely flexible & very easy to cut, handle, and install. It is used by professional race teams, auto restoration shops, & tens of thousands of customers around the world. It’s universal and can be installed in any vehicle in the entire interior including even the headliner & doors.
Car insulation is 1/4" thick overall and weighs 0.04lbs per Sqft so every 25Sqft of material weighs only 1.00lb! This is NOT a Jute or Butyl based product. It has a closed cell polyethylene core with fiber re-inforced aluminum on both sides to prevent long-term crushing.
This can be used in ANY VEHICLE to insulate & sound proof your entire interior: floor pan, doors, under carpet/seats, headliner/roof, trunk, trunk lids, and firewall (interior side). Car insulation is used in many automotive applications: muscle cars, hot rods, corvettes, imports, tuners, street rods, rat rods, classic cars, race cars, stock cars, old vintage cars, pickups, trucks, low riders, etc. We even have customers who use it in their airplane, SUV, RV, limousine, camper, boat, motor home, or school bus.
Installation - There is NO ADHESIVE on our product but you have several easy options for installing which include spray adhesive, foil tape, double sided tape, glue, etc. Spray adhesive & foil tape in combination work best for installation. Foil tape is optional to use with spray adhesive but helps you achieve the best thermal & vapor barrier. For the ultimate install - double layer it in your vehicle!
We have 100+ sizes to choose from so please check the drop down list!
- Car Insulation - Thermal Sound Deadener 40 Sqft - Lightweight Automotive Heat Barrier
- Controls Heat, Reduces Unwanted Sound, & Minimizes Vibrations
- Thermal & Vapor Barrier - Blocks 97% Radiant Heat
- Crush Resistant - Polyethylene Closed Cell Reinforced Foam Core (Overall Nominal Thickness - 1/4")
- Double Sided Aluminum - Extremely Light-weight & Flexible
User questions & answers
| Question: | Same supplier sells the tape |
| Answer: | Mine came with Trinity Force Quick Detach AR-15/M4 Scope Mount With Top Rail. 30mm with 1inch Inserts MN30ZTQCB. Works great. |
| Question: | Does this have a temperature rating? I want to use to sound proof a generator and it will get very hot |
| Answer: | Yes it does. I have one mounted on a 458 SOCOM |
| Question: | I know it's not what's it's meant for...but could this work to cut out crazy NYC outdoor noise |
| Answer: | Yes, great choice. Good wide field of view. |
| Question: | Can this be used in a boat engine compartment |
| Answer: | Not the place to ask that |
Noico RED 150 mil 36 sqft Сar Sound Insulation, Heat and Cool Liner, Self-Adhesive Closed Cell Deadening Material (PE Foam Sound Deadener)
Noico Solutions
- The cost effective 150 mil closed cell foam sound deadening material on Amazon! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Noico 150 mil is a very versatile insulation material with excellent thermal barrier properties. It is the best way to make the car cool and quiet! It’s easy to cut and install!
- Noico 150 mil has the same characteristics and excellent noise insulator properties as rubber foam. It absolutely doesn’t absorb water & has no odor unlike polyurethane foam. It has a very low weight, oil and petrol resistant. The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle.
- The operating temperature of the material is the same as of the rubber foam – up to 190 degrees Fahrenheit. DO NOT use this product as heat shield for mufflers, catalytic converters, DPF and more. In this case, you need to use special materials designed for 900-3000 degrees F.
- Sound deadening material specifications: Nominal thickness 150 mil; Total coverage area of 36 sq. feet; Number of sheets in the stack 34; Nominal sheet Size 15.7x9.8 inch.
User questions & answers
| Question: | what is the abrasion resistance of this material to be used in a trunk space |
| Answer: | This material is just foam with adhesive backing. It needs something on top of it to protect it. Typically you would put mass loaded vinyl on top of it as part of a butyl, foam, vinyl sandwich for the best sound deadening and resonance control. You can also just put carpet over it. |
| Question: | What is the max temp rating for this product? What could I use to insulate up to 900*F |
| Answer: | Noico RED 150 mil temperature limits are from -49 degrees F to +190 degrees Fahrenheit. In your situation, you need to use special materials designed for 900-3000 degrees F. We're sorry, but we do not carry such type of materials. |
| Question: | Can i use this on the hood of my 82 wagoneer |
| Answer: | DEI has hood liners. I have their silver one which is working great and hasn't peeled off in the 6 months I've had it on. And it cut down on engine noise a lot. It's only like $60 on amazon last I checked. Their black version is newer. |
| Question: | So this is a secondary layer to work together with kilmat or something? And would it place on top of it or on the other side |
| Answer: | If you want to use Noico Red 150 mil material in combination with butyl based sound deadening material, then the installation plan will be as follows: 1 layer: butyl based sound deadening material with thickness around 80 mil installed on pre-cleaned and degreased metal surface of a vehicle; thoroughly pressed down to the metal surface with a roller 2nd layer: Noico Red 150 mil installed on top of the layer of butyl based material Please note, all sound deadening materials are to be installed only from the interior side. |
Noico 80 mil 18 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening…
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening mat has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
- Car insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 18 sq.feet; Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 19,5x15 inch. Roller is not included.
User questions & answers
| Question: | Can i put it in the inside of my engine bay? I have a jeep yj |
| Answer: | We do not recommend using this material for treatment of engine compartment except for using it as an application for the hood. The best solution would be the treatment of firewall and floor from interior side. |
| Question: | I am thinking of insulating my new dewalt contractor tablesaw would this product absorb the high pitch noise |
| Answer: | That's not how this product works. It adds mass to large vibrating panels. You want mass loaded vinyl with a closed cell foam decoupling layer. |
| Question: | Is this only for sound or could it be used as a heat barrier for under the hood |
| Answer: | Noico 80 mil is first of all sound and vibro insulation, it is also a heat barrier but to a much lesser extent.Specifically for heat insulation we recommend using special materials such as Dynamat Hood Liner or Noico Liner. But the greatest effect can be obtained when applying Noico 80 mil as the first layer and Hood Liner as the second one. |
| Question: | Why are the larger packs no longer available |
| Answer: | So you have to buy more smaller rolls at a higher price |
Kilmat 80 mil 18 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.5 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. KILMAT 80 mil is light weighted sound deadening material!
- Audio insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 18 sq.feet; Number of sheets in the stack 9; Nominal sheet Size 19.5 x 15 inch. Roller is not included.
User questions & answers
| Question: | Can it be used under a vehicle by the muffler |
| Answer: | We're sorry, but none of our products can be used outside the vehicle or close to the heat source. |
| Question: | Does this require additional adhesive if used between headliner and car roof |
| Answer: | Kilmat 80 mil material is self adhesive, there is no need for additional adhesive to be applied to install it to the roof of a car, It's important to clean, dry and degrease a metal surface prior to installation of Kilmat 80 mil to it. Make sure to thoroughly press it down to the metal surface with a roller until the special embossment on the foil is plain and smooth. |
| Question: | Can i use this in car to reduce noice coming from outside? like road sound |
| Answer: | Yes, you can. Kilmat 80 mil main use is to reduce the noise, rattles and vibrations of the metal of the car. The road noises make the metal of your car resonating. Thus, installing sound deadening material will help you to reduce this resonance and make your vehicle quieter. We recommend installing the material to such key areas as: the doors; floor together with firewall, wheel arches (if you have access from the interior side of your vehicle), trunk and trunk lid; a roof. Please note that all of our materials are to be installed only from the interior side of a vehicle. No outside application is possible. For better results we also recommend covering the layer of the sound deadener with the layer of closed cell foam material for sound and thermal insulation. |
| Question: | Does it help to reduce heat in the cab |
| Answer: | Kilmat 80 mil sound deadening material is mainly intended to eliminate the road, engine noise and metal vibrations of a vehicle. It does possesses some thermal insulation properties but to significantly lesser extent. Its primary designation is vibration control. |
Latest Reviews
View all
Blanket Storage For Kids
- Updated: 21.04.2023
- Read reviews
Organic Self Tanners
- Updated: 11.07.2023
- Read reviews
Exercise Supplements
- Updated: 17.02.2023
- Read reviews
Bose Ear Buds For Androids
- Updated: 06.05.2023
- Read reviews
Digital Timer For Gym
- Updated: 07.01.2023
- Read reviews