11 best k n fuel pumps

Product description

K&N Inline Fuel Pumps provide premium quality fuel system hardware with a universal design that fits a wide variety of applications. Compatible with most fuels, this self-regulating 12-volt pump helps prevent vapor lock and flooding. Engineered to pump 25 gallons per hour between 1.5 and 4 psi, this product comes with a fuel filter and includes all necessary installation hardware.

• Compatible with diesel, biodiesel, gasoline, E85, methanol, ethanol, alcohol and other fuels
• Universal design fits most applications
• Pumps 25 gallons per hour between 1.5 and 4 psi
• Self-priming design provides a quiet running volume
• Eliminates vapor lock and flooding

User questions & answers

Question:	what size pipe thread are the ports
Answer:	Lets calculate))) $10 item cost, around $10 shipping and Amazon Fee also around $10... Total $30... If you will calculate your expenses for buy from REI it will be same, because you need to go to store (time plus gas for your car or REI shipping charge) Thanks for undestanding
Question:	is this a gravity feed
Answer:	They look similar, but I cannot tell without accurate measurements. I use the MSR PocketRocket (sells for $29.95). It is a great stove in all weather. The bottles are large and they last a long time. Much less cost that the JetBoil system. No comment on the quality difference, as I went with the cheaper model and it works great. BTW - I roast my own coffee beans; and this is a great stove for roasting.
Question:	Is it quiet
Answer:	MSR IsoPro fuel is a mix of 20% propane and 80% isobutane. (Manufacturing tolerances allow up to 6% n-butane, but this is minimized as much as possible and typically falls below 2%.)
Question:	can fuel flow through it when its off? i want to use it to help prime my lines to the carb
Answer:	6 1/2” tall

Product description

K&N Inline Fuel Pumps provide premium quality fuel system hardware with a universal design that fits a wide variety of applications. Compatible with most fuels, this self-regulating 12-volt pump helps prevent vapor lock and flooding. Engineered to pump 32 gallons per hour between 4 and 7 psi, this product comes with a fuel filter and includes all necessary installation hardware.

• Compatible with diesel, biodiesel, gasoline, E85, methanol, ethanol, alcohol and other fuels
• Universal design fits most applications
• Pumps 32 gallons per hour between 4 and 7 psi
• Self-priming design provides a quiet running volume
• Eliminates vapor lock and flooding

User questions & answers

Question:	The warranty printed on the box in the photograph above is 5 years. Previous response to question was 1 year. Which is it
Answer:	I’m not sure of what you’re seeking. I can tell you that stock sets of clubs come with standard size grips. Depending on the size of your hands and the feel that you’re looking for, they can be ordered or replaced with midsize or larger grips. Size can also be increased some by adding extra wraps of tape. Best way to find an answer that helps you would be to check with a local golf pro or good sporting goods store. Hope that leads you in the right direction
Question:	Would this pump fit my 2002 Mitsubushi Lancer
Answer:	For only $1.00 I let my club put on the grip... which I love.
Question:	This pump knocks loud and does not keep constant presssure but my Samurai keeps running. Am I headed for trouble
Answer:	slim 1.0 - *1.00" diameter *10.50" Length *65 Grams +/- 5 *0.580" Coremid 2.0 - *1.20" Diameter *10.50" Length *50 Grams +/- 5 *0.580" Coreslim 3.0 - *1.30" Diameter *10.50" Length *60 Grams +/- 5 *0.580" CoreFatso 5.0 - *1.67" Diameter *10.50" Length *90 Grams +/- 5 *0.580" Core
Question:	How much lift is it capable of
Answer:	No just the grip

Product description

Note: 1. This is a 12V fuel pump. When customers install, should make sure that the voltage is 12V, couldn't be 24V. 2. It will be better to test the positive pole and negative pole before installing.

• JDMSPEED Universal for gasoline or diesel engine
• Voltage : 12V Current : andlt;1.8A
• Output Pressure : 3-6 PSI
• Installation hole distance : 2.638 inch (6.7cm); Tubing Interface: 0.315inch (0.8cm)
• Flows : andgt; 70 L/H Pressure : 0.032-0 .045 MPA

User questions & answers

Question:	Will this work on a 235 in line 6 cylinder
Answer:	No, this is an in line fuel pump that works in many applications but not for a Chevy 235. You might check out the Airtex 4149 Fuel Pump instead!
Question:	What size fuse should I use for this pump
Answer:	20 amps would start a fire. It uses about 1.2 amps, 1.5 amps max normal use, so I recommend a 2amp fuse.
Question:	I just ordered and received this unit, it has fuel in it already like its been used. Is this normal? Anyone else experience this
Answer:	I used to work at a fuel pump Factory. It's oil that comes inside of a new fuel pump. Sometimes they can smell kind of like fuel
Question:	will this work on a lawn mower? or to much fuel input
Answer:	I use mine on a Golf Cart with a small gas engine . the pump works very well

Product description

This evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability. Vehicle model years this part fits (be sure to check your vehicle trim using the Amazon garage) - [Chrysler 300: 2005, 2006] - [Chrysler Pacifica: 2004, 2005, 2006] - [Chrysler PT Cruiser: 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [Chrysler Town & Country: 2004, 2005, 2006, 2007] - [Chrysler Voyager: 2003] - [Dodge Caravan: 2003, 2004, 2005, 2006, 2007] - [Dodge Charger: 2006] - [Dodge Dakota: 2003, 2004] - [Dodge Durango: 2002, 2003] - [Dodge Grand Caravan: 2004, 2005, 2006, 2007] - [Dodge Magnum: 2005, 2006] - [Dodge Neon: 2003, 2004, 2005] - [Dodge Ram 1500: 2003] - [Dodge Ram 2500: 2003, 2004, 2005] - [Dodge Ram 3500: 2003, 2004, 2005] - [Jeep Liberty: 2004, 2005, 2006] - [Jeep Wrangler: 2005, 2006]

• Helps to reduce atmospheric pollution due to hydrocarbon emissions
• Direct replacement for a proper fit every time
• Durable against salt, debris, and other harsh undercar conditions
• On-vehicle and laboratory testing has been conducted on this part to ensure a trouble-free performance
• Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

User questions & answers

Question:	Does it fit a 2003 dodge 2500 series
Answer:	Soft rubber I think
Question:	Will this fit a 06 Chrysler Pacifica 3.5l v6 base model
Answer:	Hi Michael, they are the same size. Not sure why they are listed as separate.. but they are in fact the same variant.
Question:	Any idea where I would get the pigtail connector
Answer:	It does not come with tape.
Question:	has anyone had success with this part on a 03 durango with the
Answer:	I don't think this will fit. The diameter is .600

Product description

The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form and function as well as exceptional vehicle coverage and exclusive problem-solving features. Carter Fuel Systems universal fit Rotary Vane style pumps, for Carbureted and Diesel applications, were originally created for Military use and are appropriate for RV, Marine, AG, industrial and Performance automotive and truck applications. Can be used with leaded, unleaded or diesel fuels. Features free-flow fuel delivery, internal pressure regulating valve and a constant flow, non pulsating pump design.

• Carter Fuel Systems universal fit Rotary vane pumps are internally regulated, offer a free flow design with no points to burn out or shaft seals to leak
• 12 volt
• 1/4 inch NPT inlet and outlet
• 4 - 6 psi output, 72 gph free flow
• Includes comprehensive installation kit and full instructions for a hassle free installation

User questions & answers

Question:	is this a genuine carter fuel pump
Answer:	The indicator is the brake light itself.
Question:	will it need a return line and is it self priming
Answer:	The only build it takes is the standard reverse light. Everything else is the red LED’s. These are fantastic, fit perfect and are bright and vibrant
Question:	Does it come with the bracket and fittings
Answer:	No
Question:	Does the orientation matter? The pump I am replacing is mounted with the anchor bolts pointed down
Answer:	They are stock reverse bulbs. I cannot remember if they come with the bulb or not but if they don't just switch our the bulbs in your stock tail lights.

Product features

About Carter Fuel Systems

Founded in 1909, Carter is a premier manufacturer of fuel pumps, assemblies and accessories for the professional installer. As an industry leader, Carter is dedicated to supplying solutions that meet or exceed OE fit and function with best-in-class coverage.

With 100% factory testing and approval, Carter fuel pumps are better engineered with better quality components for better performance.

To learn more, visit the website.

Carter Fuel Pump Assemblies

Carter fuel pump assemblies and kits are suitable for marine, off-road and passenger car applications with fuel pump pressure between 45-60 PSI. Most assemblies include the following components: fuel pump, tank seal, strainer, grommets and wire harnesses. Our fuel pumps fit right out of the box – with all major components needed for the repair included.

With assemblies, the in-tank fuel pump is susceptible to impurities, which enter the path and overtime affect the fuel flow. Carter exclusively provides CleanScreen technology* to better trap these finer particles with multi-layer internal and external strainers, offering 40% extra dirt-holding capacity.

*Application specific.

Product description

FPF replacement fuel pump are designed to meet or exceed OEM specifications. Our pump features upgraded bushing, turbine impeller and Japanese armature electric motor which will ensure max performance and long lasting durability. All FPF fuel pump comes with lifetime free replacement warranty. With this kind of guarantee, you can rest assure you are taken care of if any issue occurs.

Features

Meet or exceed OEM performance and durability

Drop in replacement design

Improved internals like bushing, turbine impeller and Japan armature electric motor for better performance and durability

Advanced pressure relief valve to insure the correct PSI

Hassle free lifetime replacement warranty

• FPF replacement fuel pump are designed to meet or exceed OEM specifications. Our pump features upgraded bushing, turbine impeller and Japanese armature electric motor which will ensure max performance and long lasting durability. All FPF fuel pump comes with lifetime free replacement warranty. With this kind of guarantee, you can rest assure you are taken care of if any issue occurs.
• Replace OEM # 129612-52100, 129322-77401, 485510011
• Fuel Pump 485510011 for Perkins HP-404C-22 KD-103-10 KE-103-15 KN-102-05 ( will need to cut the harness and use connectors)
• For Hitachi Mini Excavator ZX30U-2 ZX35U-2 (3TNV88-NHB/NHBB) and AIRMAN SCREW
• Fits Fuel Pump Yanmar 129322-77401 3TN100L 3TNV88 4TNV84 4TNV88 4TNV94 4TNV98 4TNE98

User questions & answers

Question:	How many pounds of pressure does it pump
Answer:	No

Product description

Description:

100% brand new and high quality.

This universal 12 volt electric fuel pump may be used as booster, standby unit or as a completely independent fuel pump installation.

The product is manufactured in ISO 9000 / ISO 9001 / ISO 9002 certified facilities.



Specification:

Flow Rate:30 GPH

Hose Size: 5/16"

Volts:12V Operation

Pressure: 5-9 PSI

Fuse specification: 12 Amps

Material: White zinc

Cross reference : E8012S, FD0002, P60430, EP12S, 6414671



Application:

Universal . Pump is self priming and designed for Import Carburetor equipped Cars and Trucks and also Replacement Performance Carburetors .

- All 12 Volt Cars , Trucks , Boats & Generators





Package Includes:

1 x E8012S Electric Fuel Pump Kit

• Output Pressure : 5 - 9 PSI; Input Voltage: 12V; Output : 30 GPH. Fuse specification: 12 Amps; Crossreference : E8012S, EP12S, FD0002, P60430, 6414671
• 100% mechanically tested prior, ensures optimal performance and enhanced durability. Highest 12 inches fuel suction
• 100% Brand new and high quality, TS16949 quality system certified. Built-in German-made copper coil
• Universal For All 12 Volt Cars , Trucks , Boats & Generators
• 2 YEARS WARRANTY AND 100% MONEY BACK -- If you are not satisfied with the product, please contact us to refund or replace the product quickly and easily

User questions & answers

Question:	Will this work for a 1973 F350 360 motor with a 2 Barrel carburetor
Answer:	This is the cheapest way out just by a bare pump get yourself a piece of 1 inch threaded pipe that’ll go on the bottom of the pump get a piece of 10 gauge 2 wire that will power the pump by a roll of 1 inch hose and a 1 inch swivel and get an automatic nozzle that’ll be your best set up add a 1” in/out filter if you want
Question:	I want to use this to prime the line then shut off / start the engine and run with the std mechanical. Will this allow pulling fuel through
Answer:	This pump comes with an 18' DC power cord.
Question:	What is the small cylinder in the kit? Is it a check valve, filter, adapter, something else
Answer:	This is not a certified weights and measures sorta meter... as in not for use in sale of liquids dispensed. That is usually done by a county auditor office.
Question:	What fuel pump can you recommend on a boat it needs to lift the fuel about 30 inches
Answer:	Yes, this pump has a 2" bung but the suction tube max length is 34" so you will need to replace it with a longer pipe.

• ✅Universal for gasoline or diesel engine
• ✅Flow Rate: 19-20GPH, Operate Pressure: 3-6 PSI; Inlet & Outlet size: 5/16"
• ✅Easy to fit and connect: 2 bolt fixing , 2 wire design
• ✅Every pump is 100% tested before shipment
• ✅Please check your car information before purchase.

User questions & answers

Question:	Will this work on a 20hp lawn mower engine
Answer:	Immediately after installation, you have about 1minute to make adjustments and it starts to set. You need to let it dry overnight before using the club.
Question:	Once installed on a 2018 peace sport scooter, 49cc.will this pump stop pumping once the fuel filter is full
Answer:	How old are you? Do you tend to grip your existing grips loosely or harder? Midsize is slightly larger diameter, so it will feel slightly fatter. I am 67, so I felt i didn't have to grip as hard to keep control, which was more comfortable....but if you think the larger feel will seem weird, go with standard.
Question:	Which is the inlet and outlet? Can I run it dry to find out
Answer:	No - I bought the ‘grip pkg...double sided tape+fluid’ I’ve also used dbl tape+ lighter fluid
Question:	can u put this inline with a mechanical fuel? pump to prime. in other words. will it flow fuel while off or does it seal fuel line in off postion
Answer:	As far a I know, they are only sold as a complete set. I tried to contact the company myself to purchase additional grips, but they only list them as a set of 13.

Product features

Size

· Length: 5.5"

· Wedth: 2.25"

· Inlet & Outlet size: 5/16"

Features

· Input Voltage: 12V

· Operate Pressure:3-6 PSI

· Current:1.0A

· Flow Rate: 19-20GPH

Superior Material

Since 2001, we have started to manufacture the fuel pump for after market. These fuel pumps are all made up of first-class material in order to strengthen the durability and extend the usage life. And all procedures are executed strictly according ISO/TS1649 and QS900 standard which is the highest quality class for OEM in auto industry.Every pump is 100% tested before shipment.

About Products

We realize that customers may have problem with products and installation.A professional installation is highly recommended.By the way, we keep recording all issues for providing higher qualified products.

Strict Quality Control

All parts are under strict quality control not just before shippment but also through the production process.Each step of production multiple quality control checks are performed to insure the quality of each and every parts.

MOSTPLUS

MOSTPLUS aims to provide the best service and the most qualified products to customers. Our goal is meeting your need!

• Externally Mounted in rear center of the car or truck; Can be installed along with a high performance walbro intank fuel pump or alone
• Package includes: External Fuel Pump x 1 ; Internal Fuel Filter (already fitted) x 1 ; Rubber connection covers x 2 Clips x 2 ; Nuts x 2 Washers x 2 ; 6 AN Male outlet adapater X1 ; 10AN Male Inlet adapter X1
• Interchange 058025044, 300LPH under 43PSI;Only Compatible with gasoline car.
• Dimension: Length : 196mm ; Diameter : 60mm ; Inlet : M18x1.5 Metric; Thread Outlet : M12x1.5 Metric; Thread Weight:1,090 g ; Positive terminal is M6, ground terminal is M5
• Please check your car information before purchase.

User questions & answers

Question:	The outlet fitting that has the built in check valve in it, what fitting size connects to that male thread
Answer:	I don't think so. It is a kit (set). Maybe contact them and ask.
Question:	Will this work on a 73 chevelle 350 sbc with Q-jet carburetor
Answer:	Midsize is a bit larger and heavier than standard grips. Usually for big hands players. You can check the dimensions in the fourth picture in item pages. Thank you.
Question:	How do I send you a picture of the destroyed pump? Do you have an email address
Answer:	Any size circumference will work...I chose midsized. These are really good grips for the money. Can’t tell the difference from the higher end grips that I’ve used in the past.
Question:	will this work on a chevy 8.1L
Answer:	Depends on which color/availability. Some colors have std and midsize. Or wait and try on a different day.

Product features

Dimension

• Length : 196mm
• Diameter : 60mm
• Inlet : M18x1.5 Metric Thread
• Outlet : M12x1.5 Metric Thread
• Weight:1,090 g

Package includes

• External Fuel Pump x 1
• Internal Fuel Filter (already fitted) x 1
• Rubber connection covers x 2
• Clips x 2
• Nuts x 2
• Washers x 2

Technical Data

• Operating Voltage:12V
• Min Voltage:8V
• Max Voltage:18V
• Operating Pressure:75PSI(5.0Bar)
• PRV Activation（0-130PSI)
• Fow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V
• Flow rate: 300 LPH(80 GPH) under 43 PSI(3.0 bar) &12V
• Flow rate: 300LPH(80 GPH) under 75PSI(5.0Bab) & 13.5V
• Current:15A under 75PSI/12V
• High Temperature Reduction: 30 LPH(8 GPH) Operating temperature range: -20 ℃ - 90 ℃（-68 °F-194 °F) Storage temperature range: -40 ℃- 70 ℃ (-104 °F-158 °F) Recommended Horsepower Capabilities: up to 750HP for Naturally Aspirated engines & 650HP for Turbo/Supercharged engines

About Products

We realize that customers may have problem with products and installation.A professional installation is highly recommended.By the way, we keep recording all issues for providing higher qualified products.

Strict Quality Control

All parts are under strict quality control not just before shippment but also through the production process.Each step of production multiple quality control checks are performed to insure the quality of each and every parts.

MOSTPLUS

MOSTPLUS aims to provide the best service and the most qualified products to customers. Our goal is meeting your need!

• Works well as a fuel transfer pump
• Application: Universal for carbureted applications on most 4, 6 and 8 cylinder vehicles .
• Operating fuel pressure: 4-7 P.S.I.(Gasoline); Voltage: 12V ; Flows: 35(GPH); Package: Fittings*1 and mounting hardware *2 .
• Eliminates vapor lock and flooding, works well as a fuel transfer pump or booster pump .
• Quite Operation. CarBole's every single pump is 100 percent tested throughout the entire manufacturing process for worry free, out-of-the-box performance .

User questions & answers

Question:	can this work as a supply pump for an IH 966 set up for pulling? the gravity feed won't feed the pump enough fuel any more
Answer:	They should fit if you use the solvent to make it slide on easier. Give it a try.
Question:	Will this work to transfer gas from my boat to a 6 gallon can I need to transfer about 60 gallons, might need to lift about 4 feet to the can
Answer:	Unless you have some exotic shaft these grips will work on any club. The vast majority of shafts are a universal size so any grip will work.
Question:	Will this pump work on a 1968 chrysler newport with a
Answer:	Add plenty of mineral oil/solvent inside the grip keeping one finger on the bottom grip hole. Put your other finger on the top and shake to ensure all inside walls of the grip is covered evenly. Spray the shaft on the top and bottom of tape and slide grip on immediately. Once on, you will have a minute or two to remove from vice to finalize the proper alignment with club head while looking down the shaft.
Question:	What is the difference between the various models 12d, 12s and 12d
Answer:	I think it both? not sure why you want to contact them but their grips are not that great...i regret buying mine and had to re-grip them shortly. Better off just sticking to golf pride.

Product features

Specification

• Fuel Pump Type:Electric external
• Fuel Pump Voltage:12 V
• Free Flow Rate:35 gph/132 lph
• Fuel Pressure (psi):7 psi
• Fuel Pressure Regulator Included:No
• Sending Unit Included:No
• Inlet Size:5/16 in.
• Inlet Attachment:Female threads
• Outlet Size:5/16 in.
• Outlet Attachment:Female threads

High Performance

• Gravity Fed type pump with high quality imported copper wires, good sealness; simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. 4-7 PSI, 35 GPH. Universal design for most domestic 4, 6, & 8 cylinder carburetor applications.

Attention

• Only fit for gasoline, most domestic 4. 6 & 8 cylinder carburetor applications.
• NOT FOR fuel injected engines or use on air craft of anytype.
• NOT FOR E85 standerd or for ethanol, methanol and race fuel water and watery liquid.

How do I know if my electric fuel pump is bad?

The first sign of a bad fuel pump will probably be a sound. It's normal for a fuel pump to make a low humming noise as it runs, and you might be able to hear it coming from the gas tank area. As a pump gets older and begins to wear out, the sound can turn into more of a loud whining or droning

Kind Reminer

Notes: 1. Forbid to pump the water, alchol and the fuel contains many impurities. 2. Please check the pumps shut off pressure in our description, make sure it is your best choice. 3. Pumps require approximately one amp average draw at maximum delivery.

Product description

Holley is probably best known for its hot-rodding image. Indeed, Holley DOMINATOR - carburetors still propel 1,200-horsepower Pro Stockers down the quarter mile. But that's only part of our story. Holley Performance Products provides a diverse line of merchandise for original equipment, as well as the aftermarket.

• Good Up To 300 Horsepower
• Reliable Solid State Design
• Simple 2 Wire Hookup
• Self Priming And Regulating
• Quiet Operation; 12 Volt; 1.5-4 psi; 25 gph; Compatible with all Fuels; For Carbureted Applications

User questions & answers

Question:	Will this work with a 5/16 fuel line
Answer:	Hi Jonathan, the Super Stroke XL (or "Plus" Series) does not come with the countercore weight. You will want to purchase this separately. The weight is usually available as 25g, 50g, or 75g weights.
Question:	What is the fitting thread size
Answer:	No, it doesn't add to the length of the putter but the grip will extend further down the shaft. If you're looking to lengthen your putter you can add a plug when regripping
Question:	How far will this pull gas
Answer:	of course
Question:	Gravity feed
Answer:	Yes, as long as you grip your clubs over a catch and recycle it.