13 best chrome paint for rims

Product description

A fast drying lacquer spray paint that provides durable indoor and outdoor protection. For use on most metal, wood and wicker. Especially useful for repainting mag and aluminum wheels. Dries to the touch in 5 minutes and recoat in 20 minutes. Resistant to the effects of weather and many chemicals. For bare or rusted metal surfaces, use with 66-110 Light Gray Primer. VOC Compliant in all 50 states.

• Fast drying lacquer spray paint
• Provides durable indoor and outdoor protection
• Use on most metal, wood and wicker; especially useful for repainting mag and aluminum wheels
• Dries to the touch in 5 minutes
• VOC Compliant

User questions & answers

Question:	Can it be use over acrylic paint?Making coaster out of tile and want to use something other then resin
Answer:	I'm not sure for your question, but I used it on my car factor rims which were totally rusted (actually brown rust color) and it look like new after I sprayed it on.
Question:	Can gloss acrylic clear spray be used in car headlight reflectors housing
Answer:	Better to use a H7 clear coat, you caun use even on your windshiel.
Question:	Any pictures of how it looks
Answer:	not available at this time
Question:	I'm told you can use acrylic laquer to protect fiberglass ladders that spend a lot of time outdoors. Can you use this product for that purpose
Answer:	I'm not sure

Product description

Rust-Oleum Automotive High Performance Wheel Coating spray paint provides a long lasting and durable finish which restores the original look of wheels and hubcaps. Transparent coat provides protection and increases durability of Rust-Oleum High Performance Wheel Coatings when applied without sacrificing beautiful color. Any angle spray with comfort tip allows painting of hard to reach areas while reducing finger fatigue.

From the Manufacturer

Rust-Oleum High Performance Wheel Coating enhances the look and color of your vehicle's wheels while keeping the surface free from rust.

• Rust preventative paint is suitable for use on metal wheels, plastic hubcaps and more
• Oil based formula dries fast and provides exceptional durability
• Dries to the touch in 10 minutes and covers up to 12 sq ft
• Protective clear wheel paint offers superior dent and scratch resistance with long lasting durability
• Provides a durable, high gloss coating

User questions & answers

Question:	Is this a paint or just a transparent spray to prevent rust? Can I just spray it on the wheels of camry 2010? Or there are additional steps
Answer:	It's a clearcoat, so technically it's transparent paint. And yes you can just spray on your wheels, there are additional steps that the manufacturer recommends, or I personally; like sanding, applying primer, applying color(painting) and then clear with this product to get good results. I did the 4 wheels on my car and they look awesome but I took a lot of time doing prep. If you don't do the prep work it can still be done just don't have high expectations and later blame the product because you didn't put the work in it. At least make sure the surface it's clean, and keep in mind it's clear paint so it will not cover any defects, to get a glossy finish spray a light coat followed by one or two wet coats, be careful to not let the paint run when you apply the wet coats. As for the rust prevention I din't know.
Question:	Will this product adhere to raw aluminum or does does it need to go on over paint
Answer:	Best to use 2K epoxy or self etching primer over clean well prepared aluminum. Do not let anyone tell you orherwise.
Question:	Can this be used for wood? (I'm trying to spray paint my skateboard deck and I need a clear coat so the paint doesn't come off
Answer:	I use this on my dump truck metal sides. It also stays very well on my wood sideboards too. I just give it 2 or 3 coats and let it soak in.
Question:	How many cans does it take to do five rims, inside and outside of rim
Answer:	I was able to paint the outsides of 4, 17" rims and the center caps with 2-3 coats, with less than 4 cans. The trouble I had is that the paint really needs to bake so that the surface will harden. The appearance was great, but didn't last. I think if I had the ability to bake the paint, it would still look great and last the elements.

Product description

Rust-Oleum Automotive High Performance Wheel Coating spray paint provides a long lasting and durable finish which restores the original look of wheels and hubcaps. Rust, corrosion and weather resistant formula with easy to apply design to change the look of any vehicle without the hassle. Any angle spray with comfort tip allows painting of hard to reach areas while reducing finger fatigue.

From the Manufacturer

Rust-Oleum High Performance Wheel Coating enhances the look and color of your vehicle's wheels while keeping the surface free from rust.

• Rust preventative paint is suitable for use on metal wheels, plastic hubcaps and more
• Oil based formula dries fast and provides exceptional durability
• Dries to the touch in 10 minutes and covers up to 8 sq ft
• Dent and scratch resistant wheel paint creates a long-lasting finish
• Provides a glossy, high shine finish for a brand new look
• Stops Rust Formula prevents corrosion and rust
• Restores the original look of wheels and hub caps

User questions & answers

Question:	What color is steel? looking for lt silver color... do the wheels need to be primed first? thanks
Answer:	I used silver for my steel wheels and they look good. I didnt used primer is not needed ,but i cleaned wheels first before spraying.
Question:	Is this enamel or acrylic? Thank you
Answer:	The label on the can does not specify if it's enamel or acrylic. I can tell you it started flaking off my wheels a few days after I applied it. I do not recommend this product.
Question:	I know it says steel, but will this match my bikes brushed (universal) aluminum color I need? Painting the lower forks
Answer:	Two (2) choices: Try it. or, call the paint mfg.
Question:	I want to know how many wheels can i paint with 1 sprait of 11 ounce
Answer:	I painted my set of 4 15" rims with 2 cans each of primer, color, and clear. 1 can should do two rims if you do several light coats as recommended on the can.

Product features

Rust-Oleum 248927 Automotive High Performance Wheel Spray Paint, 11 oz., Steel

Description:

Rust-Oleum High Performance Wheel Coating enhances the look and color of your vehicle's wheels while keeping the surface free from rust. Recommended for use on plastic hubcaps and wheels made of aluminum or steel.

• Long lasting finish
• Ideal for metal & plastic
• Stops Rust formula
• Any-Angle Spray with Comfort Tip

Product description

Dupli-Color Perfect Match Premium Automotive Paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to exactly match the color of the original factory applied coating. Ideal for use on all OEM paint surfaces, Perfect Match is available in a complete line of exact-match colors for current and late model import and domestic vehicles, making this product ideal for both small scale vehicle touch-up and for painting vehicle accessories. For the final step in the exact color match process and to provide additional gloss and protection, finish with Dupli-Color Perfect Match Clear Coat.

• Dupli-Color Perfect Match Premium Automotive Paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to exactly match the color of the original factory applied coating
• Features an adjustable EZ Touch 360 degree nozzle and a wide spray pattern for smooth, even coats
• Apply over any factory applied finish or Duplicolor Perfect Match Scratch Filler Primer
• Ideal for large touch ups, color matching vehicle accessories, motorcycles, etc.
• For the final step in the exact color match process, and to provide additional gloss and protection, finish with Dupli-Color Perfect Match Clear Coat

User questions & answers

Question:	Will this paint match a 1999 civic hatchback oem silver
Answer:	The only way to be 100% sure is look up the paint code on the driver's side door jamb, as in: http://www.automotivetouchup.com/paint-codes/honda.htm
Question:	How do you select the paint color to match your vehicle
Answer:	Get the paint code from the car VIN tag (usually under the hood or inside driver door, and go to the Duplicolor website and look up by application.
Question:	clover
Answer:	I ordered 3 cans of paint, two of them were so old that no matter how long you shook them, the paint came out in globs & they were useless. I tried to RMA the paint, but Amazon told me that I couldn't ship them back because they're flamable, but I couldn't have a refund unless I returned the product. I've had good success with dupli-color before when buying it from the Auto Parts store, but I would recommend getting it locally rather than on Amazon.
Question:	I have a scratch on my bumper will i be able to just do the area with all the products or will i have to do the entire bumper to get it to blend
Answer:	You should not have to paint the entire bumper. First, prep the area where the scratch is. Clean the entire bumper, then depending on the depth of the scratch, you may want to lightly sand and area surrounding the scratch until all is smooth. Then wipe lightly with laquer thinner. Mask off the bumper to isolate it from the car. Get Dupli-color primer and apply a few light coats. Let them dry well before applying more. This will build up the area around the scratch that you had sanded. Let the primer dry overnight. Next, get some 400 and 600 grit sandpaper (wet type) and with a wet piece of 400, sand lightly the entire primed area. Keep dipping the paper in water and don't use fingertips! Clean area with wet cloth and repeat process with 600grit wet paper and you can then sand some of the areas surrounding the primer (scuff the painted surfaces around the repair) Clean it up with damp clothes and let dry. Apply the paint in light coats in a side to side motion. Don't try to cover the primer too fast. Light coats work best and allow dry time in between coats. Eventually the primer will be covered and some of the new paint will then overlap the original paint on bumper (this is part of the blending process) Once all is covered and you cannot see the primer under the paint, let it dry overnight.Next day, get some 1000 grit wet paper and sand the entire repair area lightly. This will help smooth out the new paint. Dont sand too hard so as to make the primer exposed. Sand beyond the new paint so as to scuff up the old untouched paint on the bumper. You are getting the surrounding area ready for the clear cloat blend.Wipe with clean wet cloth and when thoroughly dry you can apply the dupli color clear coat using the same light coat, overlap method. Now you will want to go beyond the repair area bringing the clear coat into the original painted surfaces by a few inches all around. Let the clear coat dry in between coats. Once clear is applyed, let it dry overnight. Next day you can wet sand the entire repair area with 1000 wet paper. Remember, no finger tips. Use your palm or get a sanding block but go lightly. Once you have finished sanding, wipe clean with wet cloth and then polish with Light polishing compound. You can do this by hand if you dont have a buffer. It may sound complicated, but that's a process that will give you the best results outside of going to a body shop. Another consideration, if the scratch is small, get a bottle of duplicolor touch up. It has the brush built in and you can possibly just carefully use the brush and paint to fill in the scratch. I hope this helps!

Product features

Perfect Match Premium Automotive Paint

Dupli-Color Perfect Match Premium Automotive Paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to match the exact color of the original factory applied coating. Ideal for use on all OEM paint surfaces, Perfect Match is available in a complete line of exact-match colors for current and late model import and domestic vehicles, making this product ideal for both small scale vehicle touch-up and for painting vehicle accessories.

Product description

Molotow Liquid Chrome Alcohol Paint Pump Marker, 4mm, 1 Each enables you to ceate high-gloss mirrored effects on nearly any surface. To achieve the best mirror effect, apply to a smooth and non-absorbent surface - like glass or plastic. Flowmaster pump marker system has patented capillary technology. Made in Germany.

• Create high-gloss mirrored effects on nearly any surface
• To achieve the best mirror effect, apply to a smooth and non-absorbent surface - like glass or plastic
• Flowmaster pump marker system has patented capillary technology
• Made in Germany
• Acrylic-based hybrid paint is UV and weather-resistant for highest opacity

User questions & answers

Question:	Can this be sanded/polished after a specific time, and when can another coat be applied
Answer:	You can sand this but it will not improve the colour. It would be best to simply add another coat if needed when dry.
Question:	Would this work over all purpose caulking
Answer:	It should if it is paintable caulking. Not sure what the desired effect is though. Might take a couple of coats.
Question:	Can this be used on a Pur facuet water filter
Answer:	It depends on the material of the filter. The chrome marker works best on a plastic surface. If the surface is metal it will not work.
Question:	Has anyone worked out the exact drying time please when used on metal ? Thanks
Answer:	Drying time varies. We recommend at least 24 hours before handeling however it should be dry to the touch in 15-20 minutes.

Product description

Dupli Colors high performance wheel coating will customize or dress up worn out wheels. It's the spray-on solution that creates a custom look. The advanced, track tested acrylic enamel formula restores original wheel appearance and protects wheels. It resists brake dust, chemicals, cleaning solvents, heat and chipping. Ideal for use on steel or aluminum wheels and plastic wheel coverings. Top with clear coat HWP 103 Clear for optimal durability and gloss.

• Flash point: -18 degrees_celsius

User questions & answers

Question:	Has anyone wetsanded after using the clear gloss? How long did it take to cure
Answer:	I wetsanded the clear gloss over this and it all came right off, sanded down to my fricken primer with 2000 grit. I couldnt believe it. I have to repaint the whole thing now kinda blows....
Question:	How does this compare to the dupli color gunmetal that I see on Amazon, as well
Answer:	This is graphite or charcoal wheel paint color
Question:	Will this match well for 2014 BMW painted alloy wheels
Answer:	I used on my 2014 BMW 528i Rims, I also uses the clearcoat to protect is from scratching easily, works great
Question:	Do you have to primer, first
Answer:	You should and it will run less and cure better, but you don't absolutely have to. If you skip primer, you have to degrease and clean the entire wheel in soap and water, then wet sand the entire surface to get through the clear coat or acrylic barrier in the paint layer, 800-2000 grit until the entire rim looks hazy when you wipe it dry. Then clean it with isopropyl alcohol, and use air to blow any remaining fibers or debris away from the wheel. All your coats must be 5-30 minutes apart, not sooner, not longer. First two coats, just lightly dust it, don't worry about coverage. Next coat should be a light overall coat that is not wet and glossy (pull it back!). Once that tacks up a bit, then you can apply a medium wet coat, by repeating the light coat you did over and over until it STARTS to look wet and glossy. Don't keep going over a spot that already does. Let it cure untouched for 7 days. Your paint will be good.

Product features

Wheel Coating

Dupli-Color Wheel Coating is perfect for customizing or dressing up worn out wheels. This advanced, track-tested acrylic enamel formula restores original wheel appearance and protects against brake dust, chemicals, cleaning solvents, heat, and chipping. Dupli-Color Wheel Coating features a highly durable finish with superior adhesion to steel, aluminum, and plastic wheels and wheel coverings.

Product description

Rust-Oleum Automotive Premium Custom Chrome Spray Paint creates an eye-catching, lustrous chrome finish for any car or truck. Use to customize automotive accents on wheels, rims, interior or even striping for a unique, trendy finish. Chrome paint requires no primer when used on smooth surfaces for a durable, one step chrome effect. Apply a gloss primer on porous surfaces or bare metal for increased corrosion resistance, better adhesion and hide.

• Use to create custom chrome appearance on automotive rims, interiors or striping
• One step lacquer formula provides exceptional shine and luster
• Dries to the touch in 10 minutes, recoat anytime for quick touch ups
• Spray directly onto smooth surfaces without a base coat or primer
• Ultra high gloss accent paint offers a distinct, on-trend look of reflective chrome

User questions & answers

Question:	How many cans of spray paint to paint my car
Answer:	4
Question:	How many cans for 4 hubcaps
Answer:	3
Question:	Can I paint my kitchen sink with this
Answer:	No it would peel off within a short period of time
Question:	will it work on a guitar body
Answer:	Yes

Product description

The first and only kit for a quick fix! - Fast and easy application - All in 1 kit - No need to take your wheels off - Many universal colors for an easier match - Perfect solution to fix “curbed”wheel Simple as 1, 2, 3. it is that easy. Mask the needed area, soften the surface using our sand block, apply paint. It has never been easier to fix your wheels quickly! Save hundreds of $$$ dollars $$$ by using Wheel Scratch Fix and make your wheels look like new!

• OEM Quality Paint
• Easy 3 Steps Process
• Double Head Touch-Up Pen
• All-In-One

User questions & answers

Question:	I have a 2018 challenger with satin carbon pearl aluminum wheels, which color would best match
Answer:	I just took a photo of one of my wheels and compared it to the color chart. The Color chart is second box down on the left when viewing the product on Amazon.
Question:	I have some Touren tf03 wheels that came with flat black powdercoat. Will this pain adhere to that surface if I rough it with a dremel sander and wire
Answer:	Absolutely it will bond strongly to the surface. Everything is included to prep surface before you apply the touch up paint.
Question:	What is the best color match for my 2012 acura tl 19 split spoke hypersilver wheels
Answer:	I took a picture of my wheel and compared it to the color chart that this product offers. The color chart is located on the left side of the screen when viewing the product.
Question:	What color match should i use on my 2018 Genesis G
Answer:	Great car!!!! I’m jelly! Don’t buy this product! It’s crap! If you can afford a Hyundai G80 you can afford a proper car detailing service for rim scratches

Product description

Rust-Oleum stops rust bright coat metallic finish spray creates a decorative look on a variety of accent pieces. Apply to any interior metal, wood, concrete or masonry surface for a shiny, metallic finish. Use to create distinctive lamps, planters, pottery and more. It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying. In addition, there is the any-angle spray feature that allows you to spray in any direction, even upside-down.

• Ideal for creating a shiny metallic finish on any interior metal, wood, concrete or masonry projects
• Paint features excellent chip resistance and Color retention will keep your projects looking good over time
• Dries to the touch or handle in 60 minutes for quick project completion
• Tough, attractive finish will not fade or dull when used indoors
• Classic, elegant finish is great for painting accent pieces

User questions & answers

Question:	What's the difference between oil rubbed bronze and metallic dark bronze if any, i'm looking for the one that looks less black
Answer:	I have to be honest, metallic is my favorite. But I use gray, white, black, and yellow too. My house is yellow, white and gray and black trim. I like wrought iron, so if I want something to match that I use a shiny black. If I want a dark metallic I use an antique version. It usually is darker with the metallic paint than the shiny metallics. I also sometimes use more than one color to get the look I want.
Question:	Would this work well on a clawfoot tub (the feet)? Any recommendations on what would
Answer:	I would use this Rust-Oleum Bright Coat Metallic silver on the feet of your tub.. This is really nice and shiny. I am very pleased with the look. It's quality spray paint...5stars
Question:	Can this spray work on a chrome car bumper
Answer:	There is a line in the instructions on the can that says "bright coat paints are not recommended for outdoor use'. Too bad you have to buy the can to be able to read that. It should be stated in the online description.
Question:	When sprayed on plastic, does it stay sticky
Answer:	Buy a can of Rust-Oleum American Accents Ultra Cover 2X Semi-Gloss Black Spray Paint and Primer in 1, 12 oz at WalMart for under 4 bucks. It's specifically made for plastics. Drys and doesn't leave fingerprints. Then after 2 coats (give each coat about 1 hour to dry), then you can use the 2x metallic paints which are also under 4 bucks for 12 oz. cans. If they don't have a metal color you want, like copper, you can still use it on the 2x gloss black used as a primer, and barrier from the plastic. It'll bond to the paint instead and come out brilliant after 3 to 4 coats. Yes, I realize this is a 2.5 year old post, but I thought it'd be helpful to those who are shopping now to know how to use this paint properly. :)

Product features

Rust-Oleum Stops Rust Bright Coat Spray 7718830-6 PK Color 11 Oz, Gloss, 6 Pack, Metallic Chrome

Turn everything you touch to shiny metallic with a can of Rust-Oleum Stops Rust Bright Coat Metallic Finish Spray Paint. In just minutes, you can transform ordinary objects, giving them a lavish shine that makes a brilliant impression.

• Fast-drying
• Indoor use only
• Distinctive, shiny metallic finish
• Apply two or more light coats a few minutes apart

Product description

Dupli-Color Wheel Coating is perfect for customizing or dressing up worn out wheels. This advanced, track-tested acrylic enamel formula restores original wheel appearance and protects against brake dust, chemicals, cleaning solvents, heat, and chipping. Dupli-Color Wheel Coating features a highly durable finish with superior adhesion to steel, aluminum, and plastic wheels and wheel coverings.

• Highly reflective metallic finish
• Durable finish resists brake dust and chemicals
• Restore to original wheel appearance or customize
• Resists cracking, flaking, and peeling
• Dry to touch in 30 Minutes / Handle in 1 Hour

• PICK YOUR PROJECT : WHEELS, TRIMS, GRILLS, EMBLEMS, MIRRORS & CALIPERS. Up to 40% Off on Wheels Kits
• HIGH GLOSS PAINT-LIKE FINISH STRAIGHT OUT OF THE CAN. Available in Solid and Metallic Colors.
• PEELABLE AND REMOVABLE, Returning Surface to Original Finish. Scratch a Corner and Start Peeling.
• GET THE LOOK AND FEEL OF A POWDER COAT WITH THE FLEXIBILITY OF A VINYL WRAP.
• LAST UP TO 2 YEARS. Great Protection Against Road Debris, Rocks, Salt, Chemical and UV Exposure.

User questions & answers

Question:	Can this be used on an engine valve cover? Will it hold up to temp
Answer:	Hey Jon, Thanks for reaching out. Superwrap DIY aerosol formula is designed to be applied to wheels and accessories. Our aerosols have been engineered specifically for the automotive industry and is tested on clear coated surfaces used by OEM car manufacturers including alloy wheels, chromed plastics, clear coated carbon fibre and metal surfaces. With that being said, since we haven't tested our products on an engine valve cover, we do not recommend this application project. Generally, it'll be too hot. Hope this helps! Thanks, The Superwrap Team
Question:	Cómo consigo verde fouresente
Answer:	Hola, Por el momento, no tenemos un "verde flueorescente", pero nuesto Verde Ithaca (Ithaca Green) es muy similar. Gracias, El equipo de Superwrap
Question:	How much would I need to do an entire car or truck
Answer:	Hi Jay, Thanks for reaching out. The Superwrap DIY aerosol is engineered to deliver low pressure for ease of application on small surfaces such as wheels and accessories. We do not recommend using it for complete body panel applications. Hope this helps! Regards, The Superwrap Team
Question:	how many do I need to get so I can do all 4 tires
Answer:	Hi, Thanks for reaching out. Depending on your rim size, you will need the following: - Up to 17" rims: 4x Gloss Black - 18" to 19" rims: 6x Gloss Black - 20" to 22" rims: 7x Gloss Black Keep in mind that you need to reach a minimum of 10x wet coats per rim in order to obtain the advertised result, durability and for proper removability. Don't forget that you are spraying for wrap thickness and not only color coverage. For your information, we sell wheels kit that includes exactly what you need for your application project at a discounted price. Feel free to contact our Support Team on our website if you have any other questions. Regards, The Superwrap Team

Product description

The Dupli-Color Scratch Fix All-in-1 touch-up tool features an abrasive prep tip, exact-color match paint, and clear coat. We are the only brand with colors tested and approved by vehicle manufacturers for a perfect match to the original factory finish when restoring that scratch or chip. The New Scratch Fix All-in-1 tool helps you fix it easy and fix it right in your garage.

• Abrasive tip removes loose paint and rust
• One Coat Prime and Paint Formula
• Pen tip for fine scratches
• Brush end for larger chips
• Clear coat to seal, protect and ensure a perfect factory matched finish

User questions & answers

Question:	There is a four prong plastic ting to protect the tip. How do I remove it
Answer:	I had the same question - it is very tight but wiggle and push around the perimeter and it does pull off.
Question:	This item keeps popping up on the tesla link. does this match the rims for a tesla model 3 18" aero wheel
Answer:	Yes.
Question:	Does this match Mazda 6 GT 19” gunmetal rims
Answer:	I have a Tesla M3, rims are gun metal, matches well
Question:	What color matches the Tesla model 3 19” sport wheels (silver)? Thank you
Answer:	Can anyone actually specify the proper color for the 19" Sport Wheels (tons of confirmation for the 18", but I'm not seeing anything for the 19s)?

Product features

Scratch Fix All-in-1 Exact-Match Automotive Touch-Up Paint

The tool features an abrasive prep tip, exact-color match paint, and clear coat. The convenient, ergonomically designed Scratch Fix All-in-1 is the first touch-up tool of its kind to combine both paint and clear protective top coat in a single package. Our colors are perfect match to the original factory finish when restoring that scratch or chip.

Product description

Touch Up Paint for your BMW



One 1/2 Ounce Base Coat



This is not fingernail polish thick. It is ready for use in a spray gun straight from the bottle. If you would like this product to be thick as fingernail polish then leave the cap off and stir every half hour until desired thickness.



We use this same paint on our tow hook and headlamp washing systems covers and it matches up beautifully.



If you are not familiar with how to apply touch up paint there are many videos on the internet to guide you through the process so you may get the best possible results.

• Touch up Paint

User questions & answers

Question:	Would that color match my 2011 bmw x5 35i wheel
Answer:	I don't know . It didn't match my 2017 bmw X6. Good luck.
Question:	Would this match the 17” alloy wheels on my 2015 bmw z4 sdrive28i
Answer:	Reflex silver, only used on BMW wheels is almost the same as the BMW car color Titanium Silver 354. A very bright silver. If it looks grey like the BMW M wheels then it's not reflex silver.
Question:	Can this be brushed on? (Sparkling graphite metallic A
Answer:	Yes. A brush is included.
Question:	Would this match the 19” alloy wheels on my 2017 bmw x3 sdrive28i
Answer:	Reflex is ONLY a wheel color. BMW never put in on the vehicle. So I like to tell customers that the best color match for those wheels is Titanium Silver 354. So...if your wheels look like Titanium Silver 354 then they ARE Reflex Silver.