12 best headlight covers

• Style - In addition to keeping you safe at night, our headlights’ stylish design keeps you looking good on the road!
• Tougher-Than-Nails Construction- Heavy-duty housings are made of superior OEM Grade ABS plastic to ensure exceptional resistance to weather and impact that guarantees durability for years ahead.
• Plug-n-Play Installation- As a fully compatible replacement for factory parts, our bolt-on style headlights are designed for quick and easy installation,requiring no modification or drilling.
• Guaranteed Quality- Our headlights are thoroughly tested to deliver smooth operation as well as for impact and heat resistance and endurance against rough road conditions over a long period of time. The units are completely sealed to prevent moisture from being trapped inside the housing.
• Product Compliance- AUTOSAVER88 strictly adheres to DOT & SAE safety standards which all OE light manufacturers must abide by.

User questions & answers

Question:	Hello, will this fit Japan 2001 Accord
Answer:	Yes it's for a2000-2002 accord 4 door.
Question:	Hi sir want to know is it made for hid xenon or led
Answer:	Dear these headlight are made for hid xenon.
Question:	Will these fit on all Accord trims
Answer:	Hi dear thanks so much for asking, these headlights will fit cars below: 1998 1999 2000 2001 2002 Honda Accord DX Sedan 4-Door 1998 1999 2000 2001 2002 Honda Accord EX Coupe 2-Door 1998 1999 2000 2001 2002 Honda Accord EX Sedan 4-Door 1998 1999 2000 2001 2002 Honda Accord LX Coupe 2-Door 1998 1999 2000 2001 2002 Honda Accord LX Sedan 4-Door 2000 Honda Accord SE Sedan 4-Door 2001 Honda Accord Value Package Sedan 4-Door 2002 Honda Accord Value Package Sedan 4-Door 2002 Honda Accord SE Coupe 2-Door
Question:	Is it a pair or just one
Answer:	Dear thanks for asking and we sell headlights in a pair.

Product features

Headlight Assembly compatible for 98 99 00 01 02 Honda Accord OE Projector Headlamp

If your headlights aren’t as bright as they used to be, it may be time to replace them!

SPECIFICATION AND FITMENT

How to Adjust Your Headlights

Working headlights are a critical component of any vehicle

Problems and Solutions

• ·Have the headlights on your car been dimmed by abrasion from road debris?
• Are your factory headlights not bright enough?
• ·Are your headlights yellowed and discolored from the sun and elements?
• ·Do faulty headlights make you afraid to drive at night?

If your headlight assembly fails to provide satisfactory performance, you should consider changing it ASAP

Product description

PLEASE ATTENTION:

Please confirm the dimension of your original HID or LED bulb housing before you purchase, so that you won't order wrong or return. Our dustproof cover only fits for H1 H4 9003 HB2 H7 H11 H8 H9 H13 9008 9005 HB3 9006 HB4 9012 HID or LED headlight conversion kit. And the max size of the dustproof cover is 4.33 inches, pls check this again before order. IN ADDITION, you don't need to put back your original rubber housing seal cap after installed our universal headlight seal dust proof cover!

PRODUCT FEATURES:

1. Using high quality PVC rubber material, No more drilling! Better than original cover.

2. Easy to use and sample installation.

3. It support IP68 waterproof and dustproof rating!

4. Fit for mostly HID and LED headlight bulb type. Such as H1 H4 9003 HB2 H7 H11 H8 H9 H13 9008 9005 HB3 9006 HB4 9012 bulb size.

PRODUCT SPECIFICATION:

-Material: Rubber

-Color: Black

-Package Quantity: Pack of 2

-Package Weight: 0.2 KG

-Size: 4.33 x 4.33 x 1.77 inches

-Application: Fits for most vehicle headlight bulb type. Pls check the bulb size before order.

PACKAGE INCLUDED:

2x CAR ROVER Car Headlight Seal Dustproof Cover Cap for H1 H4 9003 HB2 H7 H11 H8 H9 H13 9008 9005 HB3 9006 HB4 9012 HID or LED Kit

NOTE:

If you found this headlight bulb dust covers doesn't fit for your car lights, or not big enough, pls feel free to message us via amazon, and we would be happy to help you resolve the problem. Thank you very much in advance!

• ✅PLEASE ATTENTION: Pls confirm the dimension of your original HID or LED bulb housing before you purchase, so that you won't order wrong or return. IN ADDITION, you don't need to put back your original rubber housing seal cap after installed our universal headlight seal dust proof cover!
• ✅HIGH QUALITY: The universal headlight seal dustproof cover is make of high quality PVC rubber with hole(0.905 inches diameter), No more drilling to your original seal cap to let the wire of HID or LED bulb go in or out.
• ✅APPLICATION: Fits for H1 H4 9003 HB2 H7 H11 H8 H9 H13 9008 9005 HB3 9006 HB4 9012 HID or LED headlight conversion kit if the size of your bulb and housing is same as the size of our dustproof cover. The max size of the dustproof cover is 4.33 inches, pls check this before order.
• ✅WHAT YOU GET: Pack of 2 CAR ROVER universal car headlight seal dustproof cover. Also, 30 days money back guarantee, 12 month replacement warranty, lifetime support guarantee.

User questions & answers

Question:	Will this fit 2007 lincoln mkx
Answer:	As long as hole is circular. Ridges allow for a more secure fit
Question:	its 2 or 4 since it says 2 pack and package description says 2 per pack
Answer:	It’s 2 in the box
Question:	Has anyone tried this with a saturn sky? need a new one as my new h11 led lights wont fit with original
Answer:	Hi, Normally will fit, but please check the size of the opening of your headlight assembly before order, to avoid mistake. The max size of the dustproof cover is 4.33 inches, please check. Thank you so much!
Question:	Will these fit my 2016 taurus? just installed 9005 led conversion
Answer:	As long as hole is circular. Ridges allow for a more secure fit

Product description

. Unique Look: Stylish design and light placement brings fresh, luxurious look to your vehicle. . High grade ABS plastic:for toughness, impact resistance, and heat resistance. . Plug-n-play installation: fully compatible as replacement for factory parts.Bulbs not include. . High Quality: Fully sealed, waterproof, dust and corrosion resistant, works perfectly even in harsh weather conditions. . Product Description: . Size:Left + Right Side with Front Signal Light Black Housing Clear Reflector Lens . Replace Parts Number: GM2502224, GM2503224 . Hollander Number: 116-59500R / 116-59501L . Clear Glass Lens provide the bright illumination in any weather an darkness . Application: . 2003-2006 Chevy Silverado 1500/2500/3500/1500 HD/2500 HD Pickup . 2007 Chevy Silverado 1500/1500 HD/2500 HD/3500 Classic Body Pickup Only . 2002-2006 Chevy Avalanche 1500/2500 Pickup (Without Body Cladding)

• Fitment: 2003-2006 Chevy Silverado 1500
• 2003-2004 Chevy Silverado 2500
• 2003-2006 Chevy Silverado 2500 HD and 2003-2006 Chevy Silverado 3500
• Also fit 2003-2005 Chevy avalanche (without body cladding - plastic sides cover )
• No installation guides are included, we highly recommend to seek professional installation

User questions & answers

Question:	Are these lights DOT approved
Answer:	I don’t know, but I do know they are not worth buying. I’m on my second set from warranty and they are cracking and fading after less than a year.
Question:	how easy are these to install or do you need a professional to do it
Answer:	Very easy to install, do it yourself
Question:	I have a 2007 Silverado Classic 1500 4wd. Will these fit my truck
Answer:	it will not fit 2007 model, sorry
Question:	Your product info says it will fit my 2003-2006 chevy silverado 2500 hd, amazons fit test says it will not... which is correct
Answer:	i have a 03 2500hd and they went right in, only issue i had was the holes for the retaining pin on headlight housing was a little tighter then my stock lights but wasn't a big deal, i would buy them again. hope this helps....

Product description

DESIGNED FOR

2006-2011 Honda Civic Sedan

[4-Door Sedan]

OEM Equivalent Part Number:

HO2502127, HO2503127, 33101SNAA02, 33151SNAA02, 33101SNCA01, 33151SNAA01, HO2503125, HO2502125

Attention:

[Compatible 4-Door Sedan Models Only]

[Not Compatible 2-Door Coupe Models]

Condition: New

Color: Onyx Black

Black Housing | Clear Lens

Package Include: Driver & Passenger Side (Housing & Lens)

PRODUCT FEATURE

Street Legal Reflector:

Highly Reflective Amber Reflectors offer OEM compliances with DOT and SAE standards

Lens:

Our Polycarbonate Lens offer superior UV protection and a high impact resistance

• 100% Brand New; Only Lens and Housing Included; Driver & Passenger Side
• Meets all Regulations in USA & Canada; with DOT & SAE Stamped
• Replacement for Stock Assembly; Lenses Ensure Full illumination and Maximum Safety
• Installation Instruction not Included; Professional Installation Recommended; Price More than $180 Will be Require a Signature for delivery
• 30 Days Return Policy with 60 Days Warranty

User questions & answers

Question:	do they include the Bulbs
Answer:	These came with the yellow bulbs (turn signal) - the rest of the bulbs are on you to replace. - JS

Product description

A Headlight (headlamp) is a lamp attached to the front of a vehicle to light the road ahead. Headlight performance has steadily improved throughout the automobile age, spurred by the great disparity between daytime and nighttime traffic fatalities. Headlights are one of the most important components of your vehicle; they allow you to see the road in front of you clearly during the night and in any bad weather that may arise. Our headlights upgrade the face of your vehicle with clear style and extreme range.

• Plug-N-Play Operation, Direct OE Fitment or Replacement for the Stock Unit
• Comes with Complete Set of Headlight (Driver and Passenger Side)
• Brings a Different Appearance to Veichle that Great for Show Use
• Bulbs Not Included / Reuse Stock Bulbs
• Application: 04-08 Ford F-150, 06-08 Lincoln Mark LT (No Instruction Included)

User questions & answers

Question:	does this come with right and left headlights or just one
Answer:	Pair (left and right side).
Question:	What kind of bulbs does this take
Answer:	It work wit original bulbs
Question:	how do I adjust the lights
Answer:	it has an adjustment screw on it best way is to go to the dealer it cost me less than $20 you need to seal them before installing
Question:	Yeah I bought a set only a month ago and they are now fogged up. What are y’all gonna do about it
Answer:	Same here. Will never purchase anything from this company again. Claims they have no warranty on any items they sell.

Product features

ITEM SPECIFICATION

• Black Housing / Amber Corner
• Bulb Model: H13 / Low Beam (Bulbs Not Included)
• Beam Type: Reflector
• OEM Part Number: FO2503201,FO2503247,FO2503248

COMPATIBLE WITH

• 04-08 Ford F-150
• 06-08 Lincoln Mark LT

Easy Installation

• Plug-n-Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.
• Requires no Modification or Drilling.
• Note: ​Installation instruction is not included. Professional installer is highly recommended.

Importance of Headlight Safety

• Maintaining your vehicle’s headlights is crucial to your safety on the road, as well as the safety of others, particularly in inclement weather or during the evening.
• Your headlights allow others to see you and increase your visibility in environments that are less than ideal, so it is vital for you to properly maintain them. Get your headlights checked to make sure they are truly helping and not presenting any unnecessary risks.
• It is recommended that headlights are aimed at least once a year, since their adjustments may change over time due to any number of factors.

ITEM ATTRIBUTES

• OEM Part Numbers : 7L3Z-13008-FA , 7L3Z-13008-GA , FO25031 , FO25021
• Comes with Complete Set of Headlight (Driver and Passenger Side)
• 1 x Pair of Headlights

• Style - In addition to keeping you safe at night, our headlights’ stylish design keeps you looking good on the road!
• Tougher-Than-Nails Construction- Heavy-duty housings are made of superior OEM Grade ABS plastic to ensure exceptional resistance to weather and impact that guarantees durability for years ahead.
• Plug-n-Play Installation- As a fully compatible replacement for factory parts, our bolt-on style headlights are designed for quick and easy installation,requiring no modification or drilling.
• Guaranteed Quality- Our headlights are thoroughly tested to deliver smooth operation as well as for impact and heat resistance and endurance against rough road conditions over a long period of time. The units are completely sealed to prevent moisture from being trapped inside the housing.
• Product Compliance- AUTOSAVER88 strictly adheres to DOT & SAE safety standards which all OE light manufacturers must abide by.

User questions & answers

Question:	Se ajustan para toyota tacoma
Answer:	NO
Question:	Horizontal beam adjustment? I cranked on the upper screw (both clockwise and counterclockwise). However, nothing seemed to move. Anyone else
Answer:	can't adjustment the Horizontal beam,only can adjust the up and down
Question:	Se ajustan para toyota tacoma
Answer:	no.
Question:	How to contact the seller on an issue? One of the headlight assemblies is fogging up constantly while the other shows no signs of water intrusion
Answer:	Please see my reply to previous question . I also sealed both units with silicone.

Product features

Specification and Application

Features:

• Tested in simulated rain/humidity/shock
• High quality aftermarket replacement headlights
• Professional installation is highly recommended
• All lamps come without bulbs, should reuse original factory bulbs

Compatible Models:

• 2005 - 2011 TOYOTA TACOMA
• HOLLANDER:114-59473AL,114-59472AR
• PARTSLINK:TO2502181,TO2503181

Installation Recommendations

1. Undo the screws, clips, or retainer springs that hold the headlight in place.
2. Disconnect the wiring from the assembly.
3. Detach the headlight from the vehicle to replace it with a new one.
4. Fit in the new headlight assembly.
5. Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
6. Reconnect the wiring that was unplugged from the assembly.
7. Put back the grille and other components that you removed. Seal them back into place.
8. Test the new assembly.

How to Adjust Your Headlights?

1. Find the adjustment screws on your vehicle, which sits on the top and side of the light housing. Adjust the headlights one at a time.
2. You can raise or lower the headlamps by turning the screw on the top of each light clockwise and anticlockwise, respectively. Keep turning the screw until the brightest part of the light beam falls directly on or just below the tape line center on the wall.
3. Turn the screw on the side for adjusting headlights to left or right direction.

Take a test road drive to find out if the aiming headlights have been done properly. You can repeat the process until you can adjust them to the right position.

Working headlights are a critical component of any vehicle

Enhance Vehicle Appearance

Create a unique appearance and help increase the resale value of the vehicle.

Product description

Give the front of your car a smooth, sculpted, aerodynamic look with these stylish headlight covers. Constructed from tough, durable Composilite, they'll also protect your valuable headlights from rocks, stones and other debris. They're custom designed for a unique appearance and perfect fit. All feature the GTS logo, and each perfectly complements other GTS light covers. Everything is included for an easy installation, including detailed instructions, with no drilling or modifications to your vehicle required.

• GT Styling GT0662S Headlight Covers; Smoke; 2 pc.
• Fit type: Vehicle Specific
• Package Weight: 2.05 pounds
• Package Dimensions: 25.4 L x 59.436 H x 20.32 W (centimeters)

User questions & answers

Question:	Is it just 1 side or both
Answer:	L & R, its the pair
Question:	will these fit my 2005 300C
Answer:	NO. THE HEADLIGHT IS DIFFERENT.
Question:	Are these headlight and taillight covers removable at night time. Do they just snap on and off
Answer:	Yes they do come off very easy

• Style - In addition to keeping you safe at night, our headlights’ stylish design keeps you looking good on the road!
• Tougher-Than-Nails Construction- Heavy-duty housings are made of superior OEM Grade ABS plastic to ensure exceptional resistance to weather and impact that guarantees durability for years ahead.
• Plug-n-Play Installation- As a fully compatible replacement for factory parts, our bolt-on style headlights are designed for quick and easy installation,requiring no modification or drilling.
• Guaranteed Quality- Our headlights are thoroughly tested to deliver smooth operation as well as for impact and heat resistance and endurance against rough road conditions over a long period of time. The units are completely sealed to prevent moisture from being trapped inside the housing.
• Product Compliance- AUTOSAVER88 strictly adheres to DOT & SAE safety standards which all OE light manufacturers must abide by.

User questions & answers

Question:	Whats the appropriate adjustment ratchet for these
Answer:	The best thing to do is, make the adjustment the same as the old ones, prior to the installation. No special tools are needed.
Question:	will these fit a 2002 f150 lariat extended cab? thank you
Answer:	Yes
Question:	Is this returnable
Answer:	Yes.
Question:	The black frame a sealant that’s missing. Mine has no black frame around the front
Answer:	There is no black frame , I believe thats just to show the product better

Product features

SPECIFICATION AND FITMENT

Working headlights are a critical component of any vehicle

Are you troubled by any of these issues?

Need more stylish parts for your car?

Factory headlights not bright enough? Are they yellow and outdated?

• Style - In addition to keeping you safe at night, our headlights’ stylish design keeps you looking good on the road!
• Tougher-Than-Nails Construction- Heavy-duty housings are made of superior OEM Grade ABS plastic to ensure exceptional resistance to weather and impact that guarantees durability for years ahead.
• Plug-n-Play Installation- As a fully compatible replacement for factory parts, our bolt-on style headlights are designed for quick and easy installation,requiring no modification or drilling.
• Guaranteed Quality- Our headlights are thoroughly tested to deliver smooth operation as well as for impact and heat resistance and endurance against rough road conditions over a long period of time. The units are completely sealed to prevent moisture from being trapped inside the housing.
• Product Compliance- AUTOSAVER88 strictly adheres to DOT & SAE safety standards which all OE light manufacturers must abide by.

User questions & answers

Question:	What LED bulbs can i add as to where they wont over heat and melt the assembly
Answer:	No
Question:	are these headlights compatible with light leveling system
Answer:	No, they do not have a connection to utilize that feature. Mine did not adjust either.
Question:	Is the price for Pair or just one side? Thanks
Answer:	Thanks for asking. This price is for a pair.
Question:	can i use these on the platinum model , do they work on the light adjustment switch in the cab. how do you fix a moisture problem with these
Answer:	Not sure about the Platinum model but would assume yes if the body shape is the same. NO - they do NOT work with the light adjustment switch. I made that mistake. I thought they did when I bought them, but they DEFINITELY do NOT work. Fixed position only and seem to point up like high beams. Keep getting flashed at by oncoming cars at night. I also have moisture problem. Not found a fix for this...yet.

Product features

Easy to install

· Undo the screws, clips, or retainer springs that hold the headlight in place.

· Disconnect the wiring from the assembly.

· Detach the headlight from the vehicle to replace it with a new one.

· Fit in the new headlight assembly.

· Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed.

· Reconnect the wiring that was unplugged from the assembly.

· Put back the grille and other components that you removed. Seal them back into place.

Test the new assembly.

Working headlights are a critical component of any vehicle

Problems and Solutions

· Have the headlights on your car been dimmed by abrasion from road debris?

· Are your factory headlights not bright enough?

· Are your headlights yellowed and discolored from the sun and elements?

If your headlight assembly fails to provide satisfactory performance, you should consider changing it ASAP.

Product description

Headlight Tint Kits are precut vehicle specific kits made from high quality tint film which carries a 5 warranty. Rtint tint films film when properly installed will not fade, lose color, turn purple, or bubble. Precut tints are a cost effective way for the do-it-yourself installer to save time and money by taking the guess work out of headlight tinting. These kits are made from a film, it is not a hard plastic cover. It is offered in an adhesive backed tint film or a removable and re-appliable midnight static tinting version. Tint kits can be removed but, not reapplied except for out midnight static tinting kits. Rvinyl Tint and Auto Accessories offers hundred of precut headlight tint kits and a full line of application tools and installation videos to insure your headlight tint is properly applied. Be sure to purchase or own the installation tools you may need to install your pre-cut headlight tint kit, no installation tools are included.

• Pre-cut headlight tint kit made specifically for your vehicle made by Rtint.
• 5 year warranty backed film designed for DIY installation.
• Step by step video installation application guide online. Installation support provided.
• No installation tools are included, but are recommended for professional installation results.
• Not a roll of tint film, this is a precut specific kit for your vehicle manufactured for you at the time of your order.

• Vehicle Fitment - Replacement for 2007 2008 2009 Toyota Camry, please check the following details.
• Excellent value &Durable materials - Original equipment quality at a lower price. - The genuine lamp shell is made of ABS&PC, which is resistant to high temperature and impact. With high toughness, it is not bulky and has a stronger texture. The imitation is made of common plastic, which can be seen by careful comparison to save costs
• Process - oEdRo's mandatory internal quality control measures ensure product reliability and ease of installation. This solid manufacturing process provides customers with a guarantee of satisfaction.strict cycle testing to ensure the quality of field products and services
• Commitment - Strictly adheres to all DOT&SAE and regulatory transport standards which are standard procedures for all product development, ensuring the safety and compliance of all OE light manufacturers
• Seamless replacement - This headlight assembly was specifically designed to look and function like the original headlight on specific vehicles.

User questions & answers

Question:	Does this fit the 2009 Toyota Camry Hybrid model
Answer:	yes,it is fit for your car perfectly.
Question:	Does this fit usa built, 2008 toyota camry hybrid models
Answer:	YES
Question:	If I purchase do I need to purchase two of them or does the one purchase come as a set
Answer:	They come as a set.
Question:	will theses fit my 2007 usa made hybrid
Answer:	Sorry, these will not fit the hybrid.

Product features

OEDRO HEADLIGHTS ENSURE FULL ILLUMINATION AND MAXIMUM SAFETY

When driving, safety is paramount. OEDRO’s bright headlights allow drivers to see the road more clearly and avoid accidents caused by blind spots and provide extended, wider, and brighter visibility to improve the safety of driving at night or in bad weather and make driving more relaxed and comfortable.

Fitment

• Compatible with 2007-2009 Toyota Camry

oEdRo Headlight Assembly Kit Compatible with 2007 2008 2009 Toyota Camry

SPECIFICATIONS:

Housing: Chrome Lampshade / Chrome Frame / Amber Reflector

Adjustable: Up & down

Interchange Part Number: O2518105, TO2519105, TO2518130, TO2519130

Other Part Number: 8117006202, 8113006202, 8117006212, 8113006212

High Beam Type: 9005 Bulbs (Not included)

Low Beam Type: H11 Bulbs (Not included)

PACKAGE INCLUDES:

1 pair headlights (1x driver side & 1x passenger side)

HIGH PERFORMANCE!

• Scientific vent design which regulates the headlights' temperature.
• Easy to exhaust, anti-fogging.
• Strong sealing, ensure excellent waterproof & dust-proof.

HIGH-QUALITY MATERIALS!

• Can withstand high temperature & oxidation & abrasion & corrosion.
• Durable in all seasons, non-deformation.
• Superior UV protection, no yellowing.
• High light transmittance, super bright.

DIRECT REPLACEMENT!

• Designed according to the original vehicle’s model, ensuring a perfect fit.
• No modification or drilling required.
• Easy to install: direct bolt-on replacement, just plug & play.

PROFESSIONAL MANUFACTURING!

• Strictly adhere to all SAE and DOT safety standards.
• Made of materials that meet or exceed OEM requirements.
• Precise molding designed by our experienced engineers.
• Advanced electroplating tech for flawless headlight reflectors.
• Designed with level adjustment screws, ensure good light pattern.
• Thoroughly tested to ensure the optimum performance and longevity.

SAFETY FIRST!

• Faded headlights decrease visibility at night, making it more difficult for drivers to see you, and making your vehicle look terrible.
• A cracked or foggy headlight assembly is a constant annoyance and can be very dangerous.
• OEDRO headlights are a simple solution. Secure & efficient & economical & convenient upgrade!
• Replace old, faded, cracked or foggy headlights with new, clear, bright, OEDRO Headlights!
• OEDRO headlights ensure full illumination and maximum safety.

EASY PLUG & PLAY INSTALLATION!

Your vehicle will look like the day it rolled off the lot!

• Open the hood.
• Uncover the rubber shield next to the grille.
• Remove the four hexagon bolts.
• Remove the headlight from vehicle.
• Disconnect the wiring harness.
• Test all lights before driving.

Note: No installation instructions, professional installation is highly recommended.

Product description

AVS light covers are one of the easiest re-styling products around. Choose the style that's right for your vehicle to improve the look of your lens, or a blackout cover to hide it completely. Headlight Covers help prevent damage to the lights and features a custom fit aerodynamic design. Meant for off-road or show use only. This headlight cover is easy to install, with no drilling required. Backed by limited lifetime warranty.

• Helps prevent damage to expensive headlights
• Custom aerodynamic designs fit perfectly, made of impact-modified acrylic with a dark smoke finish
• For off-road or show use only
• Easy to install and remove, no drilling required
• Proudly made in the USA and backed by a Limited Lifetime Warranty