12 best remote car starter installation cost

• START YOUR VEHICLE REMOTELY - Use the most complete Plug N Play Remote Starter KIT to warm or cool your F-150 15 - 20, Expedition 18-19, Edge 16-19. Works with both gas and diesel, Key Start and Push to Start vehicles. Product is powered from the vehicle, no batteries.
• ✅ PLUG ‘N PLAY REDEFINED – This starter takes plug n play to a new level. Simply plug in to your OBD2 port and you can start your vehicle remotely by pressing lock-unlock-lock on your factory key fob! ✅ NO NEED FOR EXTRA DEVICES - Start your vehicle with clicking LOCK UNLOCK LOCK on your factory remote. Press LOCK UNLOCK LOCK again and the Start-X Remote Starter will turn off your vehicle too.
• ✅ HOOD PIN REQUIRED - Your vehicle must have an OEM hood pin for the remote starter to work. Please ensure you have a hood pin before ordering. Open the hood and start the engine. If the vehicle has a hood pin an indicator will appear on the dashboard, that the hood is ajar.
• ✅ NOTE: The remote start options in the truck do not become enabled with this kit. Climate control is effectively set to auto. The level of AC/Heat is
• ✅ RANGE- The distance you can start your vehicle is the distance you can lock/unlock your vehicle from. You may want to test how far your key fob works to see if it will satisfy your remote start needs.

User questions & answers

Question:	will the park light illuminate and how long will it run before turning off
Answer:	The parking light come on and stays on as long as the truck stays running witch is about 10 minutes
Question:	I drive a 2017 Kia optima will this work on my car
Answer:	No.
Question:	Will this work for a 2013 F
Answer:	I don’t have a definitive answer. If you go to the web site notice it asks the question,”Does your vehicle have a HOOD OPEN or HOOD AJAR” warning light. I think there might be a connection. It plugs into the OBD-2 connector. 2013 year might be too early of F-150.
Question:	Will this work on more than just F-150s? Like on Silverados
Answer:	Only select Ford's not a Silverado.

Product features

The most simplest "installation" ever!

This remote starter takes plug n play to a new level.

To setup the remote starter, simply plug into the OBD2 port.

No wires!

No complex vehicle disassembly required!

Using Your New System

Our neighbor-friendly device features a no-honk remote start. The module will activate by clicking lock-unlock-lock on your oem remote and will start your vehicle. An aftermarket remote is not necessary, so there are no extra key fobs to carry around. Climate control settings cannot be controlled with the remote start device, but will automatically resume last settings used or adjust to 72 degrees in hot/cold weather.

Safe & Secure System Control

While the module makes it easy to start your car remotely, we also understand the reality of how important the security of keyless start system. To make sure you have total control over your keyless start module, the device uses a self-learning algorithm to automatically detect the vehicle during programming and connect only to your specific key fob

We’re Here To Help!

From questions to full step-by-step instructions, Start-X is here. Start-X provides easy to install remote starters to the professionals and hobbyists alike, but does not take responsibility for any damage done during or after installation. While we are happy to assist with step-by-step instructions, the installer is responsible for all aspects of installation.

Product description

The Remote Engine Starter allows vehicle owners to start the engine before entering the vehicle, as well as to activate the air conditioner, heater, defroster and defogger functions, so owners can have their vehicle ready and waiting with a comfortable interior temperature.

• Start the engine before entering the vehicle
• Genuine OEM
• Top quality
• 2015-2018 Legacy 2.5i Sport, 2.5i Ltd, 3.6R Ltd

User questions & answers

Question:	Will this work on a 2018 Impreza with push start
Answer:	H001SFL001 is the correct part # for this vehicle. Thank you for your inquiry!
Question:	outback
Answer:	H001SAL101 will fit a 2016 Outback with Push Start ignition. If you have a Key Start ignition use part # H001SAL002.
Question:	will this work on 2017 subaru impreza sport
Answer:	H001SFL100 for a key start car and H001SFL100 for a push button start car. Thank you for your inquiry!
Question:	Will this work on the 2013 outback with push button start
Answer:	It will not work on your 2013 Outback since it was made for: Subaru Outback 2015, 2018 Subaru Outback 2.5L 6MT Base 2017 Subaru Outback 2.5L 6MT Premium 2017 Subaru Outback 2.5L CVT Base 2016, 2017, 2018 Subaru Outback 2.5L CVT Limited 2016, 2017, 2018 Subaru Outback 2.5L CVT Limited w/EyeSight 2016, 2017, 2018 Subaru Outback 2.5L CVT Premium 2016, 2017, 2018 Subaru Outback 2.5L CVT Premium w/EyeSight 2016, 2017, 2018 Subaru Outback 2.5L CVT Touring w/EyeSight 2017, 2018 Subaru Outback 3.6L CVT R Limited 2016, 2017, 2018 Subaru Outback 3.6L CVT R Limited w/EyeSight 2016, 2017, 2018 Subaru Outback 3.6L CVT R Premium 2017, 2018 Subaru Outback 3.6L CVT Touring w/EyeSight 2017, 2018

Product description

Only Compatible with 2010-2015. Remote Start Ready systems use your vehicles existing remotes. Your vehicle starts by pressing the factory remote button 3 times. The RSR system integrates into your vehicle's electrical system and uses your existing components to remote start your vehicle. It is a simpler, quicker, less expensive, more reliable means to remotely start your vehicle. Nevertheless, despite it's simplicity, this system should be installed by someone with a professional level of skill. INCLUDES Toytoa T-Harness for quick, clean installation. INCLUDES software "FLASH" immediately prior to shipping to provide the most up to date functionality for your specific vehicle. INCLUDES comprehensive instructions and schematics. . PROFESSIONAL INSTALLATION STRONGLY URGED The installation of this device is simple & clean, but there is always the potential that you may need to consult the manufacturer's technical department for assistance to complete your installation. Manufacturer's assistance may not be available to non professionals. Failure to install this item correctly or failure to obtain manufacturer's assistance to complete your installation does not constitute a defect. Not compatible with manual transmission or vehicles with factory remote start systems. REQUIRES LOCATING AND CONNECTING 4 WIRES in addition to the included T-Harness, as detailed in provided instructions.

• *PROFESSIONAL INSTALLATION STRONGLY URGED (4 wires in addition to T-Harness must be located/connected)
• Only Compatible with "PUSH-TO-START" Toyota PRIUS 2010-2015. Uses factory remote - no other parts needed
• INCLUDES Factory T-Harness for clean installation. INCLUDES software "FLASH" for your vehicle to ensure most up-to-date functionality and INCLUDES comprehensive instructions and schematics
• Start vehicle by pressing factory remote "lock" button 3 times.
• NOT PLUG-N-PLAY, NOT DIY it is possible you will need technical help to complete your installation that is only available to authorized dealers

User questions & answers

Question:	It wont turn the car on. Did everything the instructions stated. I tried to hard reset it and it flashes green once then red twice. ideas
Answer:	are you getting responses when you hit remote lock 3 times? You should get parking lights flash. Be sure car is locked before you hit lock 3 times. Key presses should be for about 1.2 second each. Also dont make mistake I did and attempt to remote start while sitting in the car. Wont work if key fob is in car. Must be done from outside. As long as you get the parking light response it should activate. Also documentation was a bit lacking. I did search for remote start Prius by distributed and found much better diagrams for harness locations and plug/wire descriptions. If it did not "learn" the start code during programming you wont get any further. Hope those tips help.
Question:	Easy install. Although my car shuts back off after 10 minutes. Any ideas? Great product though
Answer:	It is supposed to shut off after 10 minutes as a safety feature. This way if it accidentally gets started, your car is not running for hours. 10 minutes has always been more than sufficient to warm mine up.
Question:	How do you find out which version of this will work on
Answer:	Yes it does on the 2011,,,no clue on the 2007
Question:	Has anyone done this with a 2004-2009 model
Answer:	Yes I did and it worked.

• ✅ START YOUR RAM 1500 REMOTELY - Use the most complete Plug N Play Remote Starter KIT to warm up your truck in those freezing mornings, by pressing lock 3 times on your existing remote. No more waiting 10 min to defog your windshield. 😊
• ✅ COMPATIBILITY – This kit is compatible only with a 2019 and 2020 Ram 1500 Push to Start. This kit will not work with the 2019 1500 RAM CLASSIC.
• ✅ PLUG ‘N PLAY T-HARNESS – The included Start-X T-Harness eliminates wire splicing and tapping, however there is one wire that needs to be tapped. Instructions are included, or you may watch our video for super easy and fast installation.✅ ✅ Windows PC is required to complete the programming process.
• ✅PROGRAMMING, TECHNICAL SUPPORT – Programming the remote starter module requires a windows computer with Internet Explorer. Users, without computer technical know-how, will find the programming complicated. Please contact Start-X support for any difficulties you may encounter. 🔴🔴During peak season, Start-X will only provide support via email. 🔴🔴
• ✅ RANGE – The distance you can remote start from is the same distance you can lock/unlock your truck. You may want to test your remote to see if it’s enough for your remote start needs. Plug N Play long range remotes are available at an additional discounted cost.

User questions & answers

Question:	Will this Work on Ram Rebel
Answer:	I was told by the manufacturer that it should work on my 2019 Ram Rebel V6
Question:	Does this have any safety measure to keep the vehicle from being driven after it is remote started
Answer:	Yes. It locks after starting. Even if some1 gets in the FOB need to be present as well
Question:	Will this work on
Answer:	No.
Question:	Does this system cancel the remote start and kill the engine once you open the door to get in
Answer:	No. Not until you push break

Product features

Plug N Play Remote Starter Kit

YES! You can install a remote starter yourself. Please don’t pay exuberant dealer fees to have the dealer do what you can do yourself. The Start-X kit was designed with YOU in mind. You, the average car owner that can fix a thing or 2 yourself.

The included T-harness greatly simplifies installation. Plug N Play.

**REQUIRES 1 WIRE TO BE TAPPED**

**A WINDOWS COMPUTER IS REQUIRED TO COMPLETE THE INSTALLATION**

Using Your New System - 3X Lock

The module will monitor the OEM remote for 3X Lock and will start your vehicle when you press lock 3 times. An aftermarket remote is not necessary, there are no extra key fobs to carry around.

Unique Start-X T-Harness

The included T-harness is a unique Start-X T-Harness that can not be found anywhere else. The T-harness is neat and avoids the the usual "rats nest" of wires.

Complete Kit

The kit contains everything you need for a successful installation, We even include a pry tool to pop the panels and zip ties to secure the module.

Product description

The kit includes: A complete remote start kit with all parts needed to properly install it into your vehicle. We DO NOT include installation instructions in the box. Once you receive your remote start kit you will be given a link to download the latest set of instructions. This way you will be getting the most up-to-date information available for a great installation. The tip sheet will have complete instructions for all components and programming instructions, created by our professional technicians.

• ✅ WHAT YOU NEED TO KNOW - This is a complete remote starter kit for 2011-2019 Dodge Grand Caravan - Key-to-Start - Gas. This kit includes a all-in-one remote start data interface bypass module, and T-Harness which reduces the amount of wire connections required to the vehicle. Firmware preloaded and is ready to be programmed to YOUR vehicle. All components required for installation are included. Automatic Transmission ONLY
• ✅ REMOTE START FEATURES - This is an Add-on remote start system for vehicles with existing keyless entry. Does not include remotes - this uses your factory remotes to start your vehicle by pressing the "lock" button three times. No need to carry extra key fobs! Warm or cool your car from the comfort of your home.
• ✅ PLUG & PLAY INSTALLATION TYPE - This kit uses a plug-in T-Harness which dramatically reduces number of wiring connections that typical systems require. The installation of this product will require only the plug-in connection. We provide concise instructions with plug locations for seamless installation. Adding additional options may require additional wiring connections. A person with basic knowledge of wiring car electronics should be able to install this product successfully.
• ✅ MPC TECHNICAL SUPPORT - In our effort to, 'Go Green', we provide a link to download MPC's exclusive copyrighted installation tip sheet made by MPC's professional technicians to help you through the installation process. In case you get really stuck or have questions about options we include U.S. based technical support Monday-Friday 9am-5pm Arizona time. You can also open a web-based support ticket 24/7.

User questions & answers

Question:	Does this kit come with the capability to use the app? I got this for Christmas and the instructions insinuate that it is controlled via the app
Answer:	The app is purchased separately to use with a cell phone.
Question:	Will this work for a 2012 grand caravan avp
Answer:	I don't know what avp means but it works on the US made grand caravan in 2012, if avp is a trim level, then that is not important and this will work.
Question:	Does this work on the town and country touring With the flex gas
Answer:	I installed this remote start on a 2014 Dodge Grand Caravan. All 2011 through 2020 Grand Caravans are equipped the 3.6 Liter V6 as are the 2011 through 2016 Chrysler Town and Countrys'. Therefore they all should be compatible with this starter. I also found a video on YouTube that shows how to deactivate the horn when pressing the lock button on the key fob, so when starting your van at 5 a.m. you won't annoy your neighbors.
Question:	Will this work for a 2014 Chrysler Town and Country
Answer:	B-3622-179 is actually for the town and country, both will work but this part number has different instructions applicable to the town and country, thank you , Pete

Product description

🔴🔴🔴🔴WILL NOT WORK IF YOU START THE VEHICLE WITH A KEY OR IF THE VEHICLE IS A HYBRID🔴🔴🔴🔴

• ✅ START YOUR RAV4 REMOTELY - Use the most complete Plug N Play Remote Starter KIT to remote start your RAV4 2019-2020. Push to Start, Non-Hybrid. 🔴🔴🔴🔴WILL NOT WORK IF YOU START THE VEHICLE WITH A KEY🔴🔴🔴🔴
• ✅ START-X – This kit it is brought to you by Start-X, all technical questions should be addressed to highly responsive customer support at Start-X.
• ✅ PLUG ‘N PLAY T-Harness – Simple, clean and unique T-Harness keeps your installation neat and avoids the “rats’ nest of wires”. No wires need to be cut or spliced. However, there is some disassembly of your vehicle required.
• ✅ NO NEED FOR EXTRA DEVICES - Start your vehicle by pressing lock 3 times on your factory remote. Press lock 3 times again and the Start-X Remote Starter will turn off your vehicle too. ✅ Smart Phone App – Smart Phone module add-on available to start your vehicle from anywhere in the world https://www.amazon.com/dp/B07H9FLDCD
• ✅ OPEN DOOR SHUTDOWN, RANGE - When you open the door to the vehicle the engine will shut down. There is no way around this. After remote starting you will need to restart the engine before driving. The distance from where you can remote start is the distance you can lock your vehicle from. Please test your key fob to see the distance you will be able to remote start from.

User questions & answers

Question:	does this fits 2021 tacoma
Answer:	No. It’s vehicle specific and only for the RAV4
Question:	Is this a press and hold on the 3rd button or just press 3 times, and does it easily trigger in your pocket
Answer:	Press the lock button 3 times.
Question:	Does anyone know if I press the lock on the car handle will start the engine? Or just the lock key on the fob
Answer:	Fob
Question:	does this fit the 2021 rav
Answer:	It should as long as it’s the push to start. Installed it on my 2019 and works great!

Product description

The CrimeStopper RS4-G5 is our remote start with keyless entry, including trunk release that offers up to 2000 ft. of range. The remotes have 5 buttons with Lock, Unlock, Start, Trunk Release and Multi-vehicle. This is the perfect system who needs that longer range or wants a remote start and the ability to replace the OEM remote with all the features this system offers. 

• 1-Way Keyless Entry & Remote Start System with brushed metal and two 5-Button Transmitters
• Brushed metal 5-button sidekick remote control transmitter
• 2000 ft. operating range / 31 programmable options
• 2-Way data port for easy data module hook-up
• Mobile Start port for easy connection to Mobile Start MS-3 module

User questions & answers

Question:	Will this work on a 2005 Mercury grand marquis
Answer:	Installed mine on a 2007 Mercury Grand Marquis. You will need the bypass as this car comes with a transponder attached to the ignition cylinder. Connect 4 wires from the transponder bypass module to the Rx and Tx wires at the transponder ring; the other 2 wires of the bypass go to ignition and power of the remote start module. Just make sure to connect both accessory wires from the remote start module to the ignition harness, otherwise your stock oem keyless entry on the Grand Marquis won't work when the remote start is active. Made the mistake of connecting only accessory wire, remote started the Marquis, but the stock oem remotes that came with the car wouldn't open the doors. Went back to to investigate my wiring, found out I needed to connect the 2nd accessory wire. Test it it. Now I can unlock the doors with my OEM remote when th remote start is active.
Question:	Does this unit work on Chrysler Pacifica
Answer:	Yes it will you need a bypass module for your factory alarm
Question:	Are all crimestopper model interchangeable meaning do i have to rerun wires
Answer:	You shouldn’t have to.. must of them do the same thing.. just make sure the color of the wires are the same in the plug.. you should be good..
Question:	will this package work as is for a 2006 nissan xterra? will i need anything extrs
Answer:	Hi, You would also need a Fortin EVO ALL Transponder Bypass

• ✅ WHAT YOU NEED TO KNOW - This is a complete remote starter kit for 2011-2014 Ford F-150 - Key-to-Start - Gas. Includes a all-in-one remote start data interface bypass module, and T-Harness. Firmware preloaded and is ready to be programmed to YOUR vehicle. All components required for installation are included. NOTES - Automatic transmission only. Requires 2 original factory keys for programming. Cloned/copied keys will NOT WORK.
• ✅ REMOTE START FEATURES - This is an Add-on remote start system for vehicles with existing keyless entry. Does not include remotes - this uses your factory remotes to start your vehicle. No need to carry extra key fobs! Warm or cool your car from the comfort of your home.
• ✅ SEMI PLUG & PLAY INSTALLATION TYPE - This kit uses a plug-in T-Harness which dramatically reduces number of wiring connections that typical systems require. The installation of this product will still require some wiring connections. We provide concise directions with wire colors and locations. A person with basic knowledge of wiring car electronics should be able to install this product successfully.
• ✅ AVAILABLE OPTIONS (at additional cost) Evo Remote 1 Ready: Add 1 button remotes with extended range AM antenna. - Evo Remote 4 Ready: Add 5 button remotes with extended range AM antenna.
• ✅ MPC TECHNICAL SUPPORT - In our effort to, 'Go Green', we provide a link to download MPC's exclusive copyrighted installation tip sheet made by MPC's professional technicians to help you through the installation process. In case you get really stuck or have questions about options we include U.S. based technical support Monday-Friday 9am-5pm Arizona time. You can also open a web-based support ticket 24/7.

User questions & answers

Question:	On a 2013 F150 - Outside the plug-in connections, how many splices, and are the wires accessible or is steering column/dashboard disassembly required
Answer:	Hello, Just 2, here is a link to the instructions so you can see how easy it is, http://ts.mypushcart.com/tipsheets/B-4370-215/9543. The 2 connections are right at the OBD2 scan tool plug by the knee bolster on the drivers side, hope this helps, happy holidays, Pete.
Question:	What if you only have 1 key
Answer:	It will not work
Question:	Will my heat or A/c automatically turn on when it starts
Answer:	Hello, it will turn on to however you have left the settings when turning the car off, thank you, Pete
Question:	Will this void my warranty
Answer:	Hello, no this will not void your warranty. https://www.ftc.gov/enforcement/statutes/magnuson-moss-warranty-federal-trade-commission-improvements-act Check out the link, that explains it well. Thank you for your inquiry, Pete.

Product features

COMPLETE KIT

Everything you need is included in the kit to get the job done.

USE YOUR FACTORY REMOTE TO START YOUR CAR

Whether you need to warm up or cool down your car, it's as easy as one-two-three clicks on your lock button!

DOUBLE CHECK YOUR VEHICLE REQUIREMENTS:

This kit is compatible with Conventional key-to-start and gas engine only

Product description

Questions and Answers



1. Whether it fits your car?



Please check the third photo to check if it fits your car.



2. Can't use the remote key to start engine?



Auto Car: When the car in start-up state, put the car gear in”P” or

“N” position and pull up hand-brake on, press the start button for

2 , the led inside transmitter will flash slowly. When you get off

the car, to shut down the engine and lock the car, then remote

start function is activated.



Manual Car: Step on foot brake, long press the third and the

fourth button at the same time on remote key for 4s.



3. Can't lock/unlock the car?



The brake wire is wrongly connected. the brake line is yellow, you

need to find the line when you use Test pencil to touch it , the light

will not light up but after you step on the foot brake,it can light up.



If you use test pencil to touch it, the light will light up directly, then

it isn't that one.

• ✅ 【 Fits For 95% 12V Car That Remote Starters For Cars -View main image No. 3 】,PKE Remote Start For Car Passive Keyless Entry Especially For Upgrading 12v Old Models, Compact, Sedan, Coupes, Suvs, Pick-ups On The Market.MP913 For Honda /Nissan /Chevy/Mercedes Benz/Jeep Cherokee More,
• ✅ 【Smart Key/phone app with PKE Function 】Remote engine starter for car with PKE Passive Keyless Entry function for Car Remote Key or Phone Control .Remote Key engine sensing distance is 50-150 meters. Phone engine start sensing distance depend on bluetooth connect distance.when the phone near the car, the car unlock .
• ✅【Remote Engine Start/ Pre-warm or Pre-cool your car】Keep the air conditioner on after getting out of the car, use App or remote key to start engine outside the car, the air conditionerthe will turn on automatically.
• ✅ 【One Key Start / Build-in Lock】 Step on foot brake and press button for 1S to start up the car directly. When start the car and step on the foot brake, the central locking system will be locked, don't worry the kids will open the door when driving.
• ✅ 【Important】Without this step, you can't use remote start function【Auto Car】 When the car in start-up state, put the car gear in”P” or “N” position and pull up hand-brake on, press the start button for 2 , the led inside transmitter will flash slowlyWhen you get off the car, to shut down the engine and lock the car, then remote start function is actived.【Mantal Car】Step on footbrake, long press the third and the fourth button at the same time on remote key for 4s

User questions & answers

Question:	Will it work on my 07 buick lacross
Answer:	Dear Glad your letter This product can be applied to your car model Please rest assured to buy This product is a one-key start button kit Mobile phone remote control to start the car and automatic induction unlocking and closing function kit This product is a modified one-key start product suite Scan our QR code to install the app App connects products via Bluetooth With 2 remote controls If there are other doubts Please contact us We will help you solve the problem as soon as possible
Question:	is there a website i can go to for installation instructions
Answer:	Dear Our product link 5 points description has a link to the installation tutorial video Product also comes with English manual input and wiring instructions The QR code installed on the phone's App is on the box If you need us to send it to you You can also leave your email address We send you If there is more doubt Welcome to contact us We will help you as soon as possible
Question:	Will this work on a 2004 subaru outback
Answer:	This should work with any car but the wiring is a bit tricky. You need to know what resistors to use in or to make the signal coming in to the CPU the same as the switch. I found the info from another car starter web site.
Question:	How do you program the key bypass for 2003 Toyota Sequoia
Answer:	Friend This product is a universal product. It can be applied to your car model. What problems do you encounter during installation? Specific instructions, we will help you solve

Product description

With up to 1/2 mile range and LED command confirmation, this is an additional or replacement remote for your Viper security and remote start system. Check the System Compatibility to see if this replacement remote will work with your Viper System.

• Viper 2 Way replacement remote with rechargeable battery
• 5-Button remote control with LED command confirmation
• Up to 1/2 mile range
• Provides LED command confirmation when commands are sent successfully
• Lock, unlock and start your vehicle remotely with the touch of a button. Viper System Compatibility: 3203V, 5204V, 4204V

User questions & answers

Question:	Does it work with 2010 Hyundai sonata
Answer:	The remote functions with appropriate Viper alarm systems. Make/model of a car is irrelevant in regards to the remote itself. As another respondent stated, contact Viper for specific information regarding usage with a Hyundai. From my experience, car alarm systems can be installed on any vehicle.
Question:	Can this replace the Viper 7153V remote
Answer:	Yes, it can be used as a replacement
Question:	Will this work with the
Answer:	Yes. The 5701 is the exact model I had. This replacement remote is better in durability due to quality and the battery lasts much longer. Not alot longer, but by at least 2 months, maybe 3.
Question:	Will this work to replace the 7251V stock remote
Answer:	The remote will replace you 7251V stock remote because I had the same one and in to of that the buttons are stiffer and the back isn't made the same; it's actually snapped together on the front and refuses to be removed mistakenly....haven't had an accidental start up or any broken parts yet. It also took the rain season here in Miami great.

• ✅ START YOUR TACOMA 2016-2019 REMOTELY - Use the most complete Plug N Play Remote Starter KIT for Push-To-Start Tacoma 2016-2019 to cool or warm your truck. ✅✅✅Separate kit available for 2020 Tacoma's, this kit wont work.✅✅✅
• ✅ START-X – This kit it is brought to you by Start-X, all technical questions should be addressed to highly responsive customer support at Start-X.
• ✅ PLUG ‘N PLAY T-Harness – Revised, Unique T-Harness designed specifically for a Tacoma. No wires need to be cut or spliced. However, there is some disassembly of your truck required. Please see the video. Instructions are included, or you may view our instruction video for super easy and fast installation.
• ✅ NO NEED FOR EXTRA DEVICES - Start your vehicle with clicking 3x lock on your factory remote. Press the lock 3x again and the professional grade Start-X Remote Starter will turn off your vehicle too.
• ✅ OPEN DOOR SHUTDOWN, RANGE - When you open the door to the vehicle the engine will shut down. There is no way around this. After remote starting you will need to restart the engine before driving. The distance from where you can remote start is the distance you can lock your vehicle from. Please test your key fob to see the distance you will be able to remote start from.

User questions & answers

Question:	I just installed it on my 2018 tacoma and the air bag light came on.. can i return it and get a refund
Answer:	Just reset you airbag light with a jumper wire Again installer bumped the airbags or pulled a wire when installed the device
Question:	Will this work on 2019 toyota 4 runner trd off road
Answer:	Ask seller, read description see if will work for your vehicle
Question:	will it work for 2020 toyota tacoma
Answer:	I’m not sure because the 2020 Tacoma has updates over the 2019.
Question:	Does this work with 2018 toyota camry se
Answer:	You could trade in the Camry for a Tacoma, then it would work

Product features

Ready For Installation

The hassle-free installation makes it a great option for avid DIY-ers and those familiar with truck mechanics. With only two main wires to connect, this project is a short and simple one for hobbyists and mechanics alike. Each remote start module is pre-flashed with firmware that matches your vehicles compatibility prior to shipping to ensure an easy set up process.

If you’re not a regular diy-er, Start-X strongly suggests professional installation. Start-X helps home mechanics enjoy remote start. We are happy to assist with step-by-step instructions, however the installer is responsible for all aspects of installation.

Using Your New System

The module will monitor the OEM remote for 3X Lock and will start your automatic transmission truck. An aftermarket remote is not necessary, so there are no extra key fobs to carry around.

We’re Here To Help!

While the Start-X module is an ideal solution for anyone looking to enjoy effortless remote start, we know that not everyone is mechanically savvy. From questions to full step-by-step instructions, Start-X is here. Start-X provides easy to install remote starters to the professionals and hobbyists alike, but does not take responsibility for any damage done during or after installation. While we are happy to assist with step-by-step instructions, the installer is responsible for all aspects of installation.

Product description

The kit includes: A complete remote start kit with all parts needed to properly install it into your vehicle. We DO NOT include installation instructions in the box. Once you receive your remote start kit you will be given a link to download the latest set of instructions. This way you will be getting the most up-to-date information available for a great installation. The tip sheet will have complete instructions for all components and programming instructions, created by our professional technicians.

• ✅ WHAT YOU NEED TO KNOW - This is a complete remote starter kit for 2011-2019 Hyundai Elantra - Push-to-Start - Gas. Includes a remote starter, and data interface bypass module. Firmware preloaded and is ready to be programmed to YOUR vehicle. All components required for installation are included. Automatic Transmission ONLY
• ✅ REMOTE START FEATURES - This is an Add-on remote start system for vehicles with existing keyless entry. Does not include remotes - this uses your factory remotes to start your vehicle by pressing the "lock" button three times. No need to carry extra key fobs! Programmable 2, 3, or 4 hourly auto-start mode options. Programmable 5, 10, 20, or 30 minute run times.
• ✅ DIY BASIC INSTALLATION KNOWLEDGE REQUIREMENT - The data module included with this kit eliminates many of the wiring connections traditionally associated with remote start installation. A small number wiring connection are required. It is not plug and play. We provide concise directions with wire colors and locations. A person with basic knowledge of wiring car electronics should be able to install this product successfully.
• ✅ MPC TECHNICAL SUPPORT - In our effort to, 'Go Green', we provide a link to download MPC's exclusive copyrighted installation tip sheet made by MPC's professional technicians to help you through the installation process. In case you get really stuck or have questions about options we include U.S. based technical support Monday-Friday 9am-5pm Arizona time. You can also open a web-based support ticket 24/7.

User questions & answers

Question:	Will it work on a 2013 toyoda scion xd 1.8l
Answer:	Hello, no this is for an elantra, here is the part number you will need, B-4808-432 and it is a t harness so it will be a plug and play install which will make the installation time cut in half. Thank you, Pete My pushcart.
Question:	What is the range of operating
Answer:	Hello, This kit works from your factory remote. So the range is as far away as your remote will lock the doors.
Question:	Will this kit work with a manual transmission
Answer:	I am not sure. The car would need to be in neutral for the starter to be engaged. Consequently if the car was parked and in neutral with the parking brake on I would think this kit would work. I just not 100 percent sure.
Question:	Which remote starter kit is for 2014 hyundai equus signature. which one of your product will operate with the equus. i intended to use the factory fon
Answer:	Hi, Sorry but we do not currently offer a kit for the Equus model.