14 best lock cylinders

Product description

Ignition lock cylinder worn out, making turning your key difficult or impossible? This direct replacement properly restores operation while maintaining the same level of security as the original equipment design.

• Direct replacement - this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
• Secure solution - this cylinder retains the anti-theft functions of the original equipment design on specified vehicles
• Easy installation - replacement is relatively simple and requires no special tools
• Trustworthy quality - backed by team of engineers and inspectors in the United States
• Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

User questions & answers

Question:	Will it find a 89 Jeep Comanche
Answer:	Yes it will.
Question:	Will this fit the Chevy S
Answer:	Depending on location
Question:	will it fit 1977 chevy pickup
Answer:	It is very tricky to align the switch YouTube has some good videos. It won't start if not installed correctly. New cylinder won't work if ignition switch is not installed properly. Good luck.
Question:	Will this fit my 1991 Chevy blazer
Answer:	No if u have an antitheft issue it's not ur ignition cylinder, it's most likely ur immobilizer sensor & or system. There's a little ring around the lock cylinder underneath the cover that reads the chip in ur key try this guy first. Good luck

Product description

This Schlage -shaped keyway and cylinder lock was designed to only aesthetically match actual Schlage keys and keyways, as it was designed specifically to be used in surface-mounted patio door handle sets. This cylinder lock is constructed of brass, it comes finished with a chrome face and features a hardened cut-away tailpiece. It works with vertical and 45 degree keyways (angle is determined when latch is extended to the locked position). *Tip: If keyed-alike cylinders are desired for more than one patio door handle set lock, kindly see Prime-Line’s model number E 2104. Note: The components of these cylinder locks are not compatible and cannot be rekeyed to match other Schlage locks, nor will Schlage keys fit into this cylinder lock.

From the Manufacturer

This patio door cylinder lock features a hardened break away tailpiece. It is used to key lock most surface mount handles. This cylinder fits a Schlage keyway and includes two keys.

• Used to replace damaged key cylinders, or cylinders with lost or damaged keys in sliding patio door handle sets
• Outside diameter of cylinder housing measures 1-9/16 in
• Lock body is constructed of solid brass and comes with a chrome face
• These replacement keys are not compatible with actual Schlage hardware. Only the keys provided in this kit fit the replacement key cylinder
• Schlage-shaped profile and cuts to aesthetically match other existing Schlage keys
• The tailpiece may need to be trimmed to fit your door

User questions & answers

Question:	can i order a 2-1/4" tail piece as 1-7/8" is too short
Answer:	I did a search on Amazon. I couldn’t find anything suitable. Ended up using a Trudeau utensil holder upside down and it works
Question:	You are more secure leaving the slider open making one think you are home than using this keyset for security. Do you have better locks
Answer:	No mine was rusted!!! It is not stainless steel
Question:	Will this work on pella sliding door
Answer:	No it does not have a filter, comes apart very easy to clean and it being stainless steele and glass it works really well.
Question:	Does this work on andersen sliding patio doors
Answer:	Call Amazon. They will help you get that done

Product description

"This drawer and cabinet lock makes it easy to secure your drawers, important files and small items. It is constructed of diecast and steel components with a stainless steel finish, and features a ¾” outside cylinder diameter with a 1-1/8” length that will accommodate up to 13/16” thick panels. It’s durable, strong and installation is simple and easy. This drawer and cabinet lock can be mounted to metal or wood, door and/or drawer panels.



It comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. The lock is keyed different with a Yale Y-11 keyway."

From the Manufacturer

This drawer & cabinet lock is constructed of diecast and steel components and it comes in a stainless steel finish. This lock features a 3/4 in. outside cylinder diameter with a 1-1/8 in. length that will accommodate up to 13/16 in. thick panels. This drawer & cabinet lock can be mounted to metal or wood; door and/or drawer panels, and it comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. This model number is keyed different and it uses Yale Y-11 keyway. Others have used these to replace damaged locks in work truck tool boxes and gumball machines.

• SECURE CABINET DOORS AND DRAWERS – This U 9945 lock can be used to secure cabinet doors, drawers and much more.
• DURABLE CONSTRUCTION – This drawer and cabinet lock is constructed of diecast and steel components with a stainless steel finish. It’s durable and strong, perfect for keeping your small items safe.
• COMES COMPLETE - This drawer and cabinet lock comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. Keyed Different, Yale Y-11 keyway.
• EASY INSTALLATION  - Installation is quick and easy – additional security for your small items and drawers are within reach! It can be mounted to metal or wood, door and/or drawer panels.
• PRODUCT INFO - This lock features a ¾” outside cylinder diameter with a 1-1/8” length that will accommodate up to 13/16” thick panels. Safety & Security Product Type-Lock & Door Reinforcer
• NOTE – Each lockset includes a pre-made key for the lock. There is a limited assortment of keys. If more than one lockset is purchased, the same key may open multiple locks

User questions & answers

Question:	Can I get a master key for 12 locks
Answer:	It will fit most. You will still need to measure yours and check the dimensions needed and what sort of clearances your specific filing cabinet will accept.
Question:	What is
Answer:	U 9945KA is the keyed alike version
Question:	Will this lock work with any metal filing cabinet
Answer:	Hello: The Child Craft Avery SafeAccess Crib has two levels for the mattress support. The highest level (for use with infants) is 17.5" from the top of the mattress support (without a mattress) to the floor. When the mattress support is in the lower position, it is 10.25" from the top of the mattress support to the floor. This crib comes with a 3" mattress so you can add 3" in for the actual height the baby would be at if you'd like!
Question:	can these be keyed alike
Answer:	Good afternoon, There is 28.6” from mattress support in lowest position to top of side rails. If they use the 3” mattress it comes with there is 25.6” from the top of the mattress to the top of the side rails.

Product description

Step up to designer styles and superior security with Kwikset Signature Series products. The San Clemente handles set has a sleek, modern look. With clean lines and a variety of finishes, you can easily upgrade the entry to your home. San Clemente also features an adjustable screw that allows for easy door mounting and a fit. The latch bolt is operated by the thumb piece on the outside and the grip on the inside. The deadbolt is operated by a key on the outside and a thumb turn on the inside. The rich tones of Iron Black add the finishing touch to this product. The Iron Black finish provides a rich and warm complement to the product’s style. The latch has round corner faceplate, Latch has 2 interchangeable faceplates.

• San Clemente has a slim square low profile deadbolt and matching handle set with a modern interior lever
• The Halifax interior lever is reversible, fits both right and left handed doors. Low profile contemporary design 50 percent lower profile than standard deadbolts
• Adjustable Throughbolt design slides vertically and horizontally to ensure a straight handleset on your door
• Handle set deadbolt is ANSI/BHMA Grade 1 certified, the highest residential security rating
• Features SmartKey Security Re key your lock in 3 easy steps; Compatible with Kwikset KW1 Keyway
• Installs easily with just a screwdriver

User questions & answers

Question:	will this work on a 3 point locking mechanism for double entry (french) doors
Answer:	Only if the inactive leaf has top and bottom flush bolts to keep it stationary... I also think they would need to be 1 3/4" thick doors.
Question:	What are the exact dimensions of the interior mounting plates
Answer:	2 5/8” x 2 5/8”
Question:	Is there a matching dummy handleset for a double door
Answer:	I need a dummy handle for this set for double entry door. Is there one available?
Question:	Can I get an extra long piece (strike?)to go into the door facing since my handle is about 4" from the edge of the door
Answer:	I think the back set is only prepared for a 2 3/8" or 2 3/4"...

Product features

Traditional Deadbolt

Low Profile Deadbolt

Slim Profile: A slim exterior and interior for a modern look

Throughbolt Adjustable Screw

Adjustable throughbolt has a full range of motion that allows the handle to fit most preexisting door configurations for worry free installation.

Adjust Up Vertically

Adjustable throughbolt has a full range of motion that allows the handle to fit most preexisting door configurations for worry free installation.

Adjust Horizontally

Adjustable throughbolt has a full range of motion that allows the handle to fit most preexisting door configurations for worry free installation.

Adjust Down Vertically

Adjustable throughbolt has a full range of motion that allows the handle to fit most preexisting door configurations for worry free installation.

Kwikset San Clemente Modern Front Door Handleset featuring SmartKey Security

The San Clemente handleset has a sleek, modern look. With clean lines and a variety of finishes, you can easily upgrade the entry to your home. San Clemente also features an adjustable screw that allows for easy door mounting and a guaranteed fit.The deadbolt is operated by a key on the outside and a thumb turn on the inside.

Comes with...

Product description

The Powerbolt touchpad electronic deadbolt is a one touch locking motorized deadbolt at a great price. With your personalized code, you can enter your home with the convenience of keyless entry. Powerbolt is easy to install, program and use, and operates on 4 AA batteries. It also features SmartKey Security as the backup keyway. This single cylinder deadbolt can be locked or unlocked by using the keypad or key from the outside as well as the turn button from the inside. The crisp, clean appearance of the Satin Nickel finish adds to the overall look of the product and brings a modern feel.

• Designer style and superior security with this Kwikset Signature Series product; Smart key security re-key technology is compatible with Kwikset (KW1) keyway
• Customized automatic door locking after 30 seconds for peace of mind and keypad stays lit for 5 seconds after inactivity
• Featuring smart key security, which protects against advanced break in techniques and allows you to re-key your lock yourself in seconds
• ANSI/BHMA grade 3 certified
• Includes latch with adjustable backset 2 to 3/8 inches to 2 to 3/4 inches to fit all standard door preparations
• Comes with a lifetime mechanical and finish warranty and a 1 year electronics warranty
• Note: Please refer the installation manual below for better use

User questions & answers

Question:	Is the access code 4 or 6 digits? Security risk with fewer buttons
Answer:	I purchased 1 online and one from the Xfinity store and was able to pair them both to my Xfinity Home hub without issues. I need 1 more but I'll get it from the Xfinity Store because it's a bit less expensive. I love these locks!
Question:	Can you use this to prevent children going outside at night
Answer:	The Kwikset 99130-002 SmartCode 913 does not have Alexa built in and since it is a Z-Wave protocol device, it will not work with any of the hub-enabled Echo devices. However, if you get a Z-Wave compatible hub, such as Samsung Smartthings hub, you can incorporate that into your network (pretty easy), then you can tell (or ask) Alexa to lock the door. I hope this helps.
Question:	can the autolock delay be set to 10 minutes
Answer:	That is probably best asked of Kwikset who can be reached at their website. My opinion is that if it can be subjected directly to moisture (rain, snow) and extreme temperatures that would be a problem since the keypad is on the outside. The main electronics are in the inside unit and would thereby be protected. I have one installed on my front door but it is protected by a storm door and roof over the front stoop. If practical the installation of a storm door would probably give it the necessary protection.
Question:	I purchased this lock but i can't enter the master. it keeps flashing red and beeping 3 times. could someone help? i went through all the steps over
Answer:	You should add window film to the inside of the window that will prevent thieves from being able to break the window.

Product features

Kwikset Contemporary Powerbolt 2.0 Electronic Deadbolt Featuring SmartKey Security

Keyless entry - no more lockouts or hiding keys. Get keyless convenience and security with customizable user codes. It's a perfect fit for any active lifestyle so that you don't have to worry about carrying or losing your keys. Fits on most standard doors and operates on 4 AA batteries,*

*Batteries not included.

Auto-Lock

Lock your door with a single touch. No additional turning/twisting needed. Forgot to lock? Configure your door to auto lock in 10 to 50 seconds.

User Codes

Program up to six individual codes for family, friends, contractors or dog walkers, or a one-time use temporary code.

BHMA

Comes with two keys and is a BHMA grade 3 deadbolt door lock.

Easy Install

Easily installs in minutes with just a screwdriver.

SmartKey Technology

Re-Key the lock yourself in 3 simple steps. Match the rest of your Kwikset locks in your home and keep your key chain light.

SmartKey Re-Key Step 1

Insert functioning key and turn 1/4 turn clockwise

SmartKey Re-Key Step 2

Insert and remove the SmartKey learn tool. Remove functioning key.

SmartKey Re-Key Step 3

Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed!

What's in the box

Product description

The Powerbolt touchpad electronic deadbolt is a one-touch locking motorized deadbolt at a great price. With your personalized code, you can enter your home with the convenience of keyless entry. Powerbolt is easy to install, program and use, and operates on 4 AA batteries. It also features SmartKey Security as the back-up keyway. This single cylinder deadbolt can be locked or unlocked by using the keypad or key from the outside as well as the turn button from the inside. The Venetian Bronze finish is hand-rubbed to reveal unique bronze highlights and provides a rich and warm complement to the product's style.

Backlit exterior keypad for increased visibility at night.

• Keyless entry convenience with the 6 button keypad that stores up to 6 unique user codes for friends, family, or your dog walker
• Customized automatic door locking after 30 seconds of peace of mind and keypad stays lit for 5 seconds after inactivity for increased visibility at night
• Featuring SmartKey security, which protects against advanced break-in techniques and allows you to re-key your lock yourself in seconds
• ANSI/BHMA grade 3 certified
• Includes latch with adjustable backset 2-3/8" to 2-3/4" to fit all standard door preparations and requires 4 AA batteries, not included
• Comes with a lifetime mechanical and finish warranty and a 1 year electronics warranty
• Note: Please refer the installation manual below for better use

Product features

Kwikset Contemporary Powerbolt 2.0 Electronic Deadbolt Featuring SmartKey Security

Keyless entry - no more lockouts or hiding keys. Get keyless convenience and security with customizable user codes. It's a perfect fit for any active lifestyle so that you don't have to worry about carrying or losing your keys. Fits on most standard doors and operates on 4 AA batteries,*

*Batteries not included.

Auto-Lock

Lock your door with a single touch. No additional turning/twisting needed. Forgot to lock? Configure your door to auto lock in 10 to 50 seconds.

User Codes

Program up to six individual codes for family, friends, contractors or dog walkers, or a one-time use temporary code.

BHMA

Comes with two keys and is a BHMA grade 3 deadbolt door lock.

Easy Install

Easily installs in minutes with just a screwdriver.

SmartKey Technology

Re-Key the lock yourself in 3 simple steps. Match the rest of your Kwikset locks in your home and keep your key chain light.

SmartKey Re-Key Step 1

Insert functioning key and turn 1/4 turn clockwise

SmartKey Re-Key Step 2

Insert and remove the SmartKey learn tool. Remove functioning key.

SmartKey Re-Key Step 3

Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed!

What's in the box

Product description

Berlin Modisch Entrance Lever door handle [Lock with Two keys] and Single Cylinder Deadbolt set for office or front door with an Iron Black Finish, Reversible for Right & Left side,



Product Description:

This Premium Quality Deadbolt & Entrance Lever door handle set features a special Square-styled, with an amazing iron black finish. This hardware piece is fully fitted with an adjustable latch of 60/70mm. and a radius square corner strike.



Package Includes:

* Entrance Lever door handle (reversible for right and left hand doors)

Single Cylinder Deadbolt (reversible for right and left hand doors)

* Radius square corner strike (with latch box)

* Diagram template for installation

* Four keys for the lock (all keyed alike)



From the manufacturer:

Our Premium Quality Square-Styled Entrance door knobs and deadbolt set is an ideal decorative accessory, professionally designed to perfectly compliment a wide range of contemporary and modern, residential interior and exterior doors. This deluxe hardware is creatively fitted with a, reversible, lever handle designed to perform very efficiently, whether it receives a left-handed or right-handed application. This original lockset comes with four keys. It also features a special square-corner striker and an incredibly adjustable latch style which is 60/70mm. and is designed to fit doors between 1-3/8 inch and 1-3/4 inch. It has an iron black finish and is protected by a clear powder coat finish.

• Designed to complement modern contemporary style interior and exterior doors for commercial and residential applications front entry door handleset low profile lever and deadbolt set
• Heavy duty high grade security door dead bolt and lever knob reversible that makes it perfect for fitting left or right handed doors
• Uniquely crafted low profile square shaped door lever and dead-bolt Entrance Set With 2 3/8 inch- 2 3/4 inch adjustable backset latches and square corner strikers
• Comes with unique thumb-turn interior lock knob that that is opened by an exterior key KW1 keyway for office or front doors, matt black color
• Durable & Portable secure handle & deadbolt which Fits 1-3/8-Inch-1-3/4-Inch doors Iron Black Finish.

User questions & answers

Question:	Can i order both a handleset with a deadbolt (for the front door) and a entry/deadbolt combo (door to the garage) to all be keyed the same
Answer:	Don't know, but you could certainly get the cylinder re-keyed....
Question:	Im looking to buy these for my french doors in my office. I need 1 dummy and 1 turning with/without lock. Do you sell that as a kit
Answer:	This is a set. i bought this as a set which is a privacy set (has locking system but no key) come as both sides turning.
Question:	If i ordered 6 dead bolt lock sets can i be assured that each would be keyed differently? or would i be able to include that spec with my order
Answer:	Yes, each cylinder lock is uniquely keyed
Question:	What ansi grade level is this? doesn't look extremely secure for front door
Answer:	I honestly don’t think i would opt to put on my front door but it is a quality product.

Product description

The Century Single Cylinder Handleset and Latitude Lever with Century trim in Matte Black is perfect for use on exterior front doors. exterior front doors. The Latitude lever offers a crisp perspective on minimalist design with its clean lines and rectangular features, while the Century trim is chic with a delicate, slightly curved shape. The striking appearance of the Matte Black finish creates an elegant look that’s sure to be noticed in any style setting. Plus, it’s been designed and tested with strength and durability in mind.

From the Manufacturer

For more than 90 years, Schlage has built a legacy of providing security, quality and innovation to homes and businesses. With products that meet the highest industry standards, Schlage hardware is made to protect your home and give you peace of mind that only comes with products that stand the test of time. Security, quality and convenience - it is easy to see why Schlage is the most preferred residential door lock brand by consumers and brand most used by builders. (Nooro Research , independent research funded by Ingersoll Rand Co., 2011 Builder Magazine, 1998 - 2011)

• Use with 1 5/8 inch to 1 3/4 inch door
• Adjustable through bolt can move up and down 1 1/2 inch to fit a variety of pre existing holes
• Self aligning screw holes make installation easy and hassle free. Keying- F-Series handlesets are 5-pin tumbler with two keys per lock
• Lever design pairs well with the modern, clean lines of contemporary and urban design while finish coordinates with popular neutrals like grey
• Backed by a limited lifetime mechanical and finish warranty. See Schlage warranty for full details. Warranty valid only on “Ships from and sold by Amazon.com or Buildcom” purchases

User questions & answers

Question:	is this a 6 pin keyway
Answer:	A locksmith would know.
Question:	Does the schlage f10acc622 accent passage lever, matte black work with this
Answer:	Yes. But you will have to order F60CEN622ACCLH for Left Hand or F60CEN622ACCRH for Right Hand to get this same handleset with Accent Lever.
Question:	I am ordering this for a gate. If I were to give your the key number/code of her entry door Is it possible to order this keyed to match
Answer:	You said that you would pin this to a Key number How do i go about requesting this before I order?
Question:	Does this have a matching complete dummy handleset including exterior handle for double front doors
Answer:	That item number would be F93 CEN 622 LAT CEN

Product features

About Us

A lot’s changed since Walter Schlage opened his first shop in 1920. At the same time, a lot hasn’t. We’re still meticulous designers, painstaking engineers, and proud craftsmen. Nearly a century later, we’re proud to grace your doors with a growing menu of stylish hardware.

Product description

Replacing an ignition lock cylinder usually means an expensive reprogramming at the dealership. This Dorman OE FIX replacement includes transponder keys that can be easily programmed in a few minutes.

• Smart replacement - this ignition lock cylinder comes with transponder keys for a fast, simple repair
• Easy installation - comes with easy-to-follow instructions for cylinder install and key programming
• Complete repair - includes cylinder, one brass key and two transponder keys
• Cost-effective replacement - saves money, time and hassle of getting keys programmed at dealership
• Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

User questions & answers

Question:	Will this work on my 2011 silverado with a remote start key fob
Answer:	No, I haven't heard yet you have to program them
Question:	Why can't item be shipped to my location
Answer:	No this will not work on this truck.
Question:	If i change my ignition switch and can not get it aligned correctly do i need to just get a new ignition lock cylinder
Answer:	You can use the new key that came with the set but it wont open the doors, you would then have to use two keys, one for the ignition and one for the doors. I re-keyed the new ignition to my old key. Now one key operates both.
Question:	will this solve my antitheft issues by using this new lock cylinder if the module could be bad
Answer:	This comes with 2 precut keys without transponder. Forget the keys. You have to use your original key with transponder. You have to recode the new cylinder, based on the tumblers code in the old original cylinder. Use the new tumblers coming with the kit.

Product description

This cylinder is constructed from solid brass and comes in a in a polished brass finish. It features a Segal SE-1 keyway with a 5 pin tumbler, and includes 2 cam options with 2 keys. This cylinder has a 1-1/8 inch outside diameter at 1-1/4 inches in length (depth), with a 1-3/8 outside diameter face. This key cylinder fits most entry door mortise lock systems and is easy to install.

From the Manufacturer

This cylinder is constructed from solid brass and comes in a in a polished brass finish. It features a Segal SE-1 keyway with a 5 pin tumbler, and includes 2 cam options with 2 keys. This cylinder has a 1-1/8 inch outside diameter at 1-1/4 inches in length (depth), with a 1-3/8 outside diameter face. This key cylinder fits most entry door mortise lock systems and is easy to install.

• Solid Brass Construction
• Mortise Installation
• Easy to Install
• Keys Included
• Includes 1 key cylinder, 2 cam options and 2 keys

User questions & answers

Question:	Does this come in thumb turn in 1-1/4" x
Answer:	The 924-710 will not include keys, our cylinders that include keys are blank door keys, they would not start a vehicle, originally equipped with a chip.
Question:	Is there a satin or brushed steel color version of this cylinder
Answer:	Only replacing ignition lock. Anti theft feature not affected.
Question:	If I order 2 locks can they be keyed the same
Answer:	I can't recall . Search YouTube , there are a number of instructional videos that will walk you through the procedure .
Question:	Is this easy to re-key
Answer:	There is a collar built into the ignition cylinder housing which contains the sensor that verifies the programmed key. So yes, you remove the old cylinder and replace. No other worries.

Product description

MUL-T-LOCK offers a low cost solution which is specifically designed to provide high security while utilizing MUL-T-LOCK’s technology and manufacturing expertise. The solution, Junior by MUL-T-LOCK, offers a comparably-priced, cost-effective product that is superior in design and quality to imitation brands. Junior cylinders can be used as 1-1/8" Mortise cylinder and as a Rim cylinder.

• High quality and pick proof rim and mortise Cylinder
• Brass Finish (Gold Color)
• Supplied with 2 keys and card
• Can not make key copies without singed card for maximum security
• Works for most mortise locks, rim locks and panic device Hadware

User questions & answers

Question:	Hello. Will this work with a standard jimmy proof lock
Answer:	Yes, this cylinder will work for you. A Jimmy-Proof is a Rim Lock.
Question:	Does this replace a standard deadbolt? Is it a universal fit
Answer:	This is not a deadbolt lock. This is a Mortise and Rim lock.
Question:	Will this work in Schlage B
Answer:	Sorry, this lock will not work on Schlage B60 lock.
Question:	Hi! is the length
Answer:	Correct, this cylinder is 1-1/8" long.

Product description

Mortise Cylinders in Aluminum features a 5 pin Schlage "C" keyway. Threaded to screw into mortise lock body. Features a Standard 1-5/32-Inch Diameter and 1-inch length. The lock cylinders have adams rite cam for use with Kawneer, Adams Rite, and most other storefront locks. NOTE: IF YOUR LOCK IS NOT THREADING IN, TRY LOOSENING THE LOCK BODY MOUNTING SCREWS.

• Schlage SC1 Keys (5 Pin C keyway)
• Pacific Doorware Brand Mortise Cylinders , Adams Rite Style Cam
• Fits Most Storefront Doors
• Includes 2 Lock Cylinders & 2 Keys
• Standard 1-inch Length , Standard 1-5/32" Diameter

User questions & answers

Question:	Can this we opened or locked from either side
Answer:	yes
Question:	Will this replace a vistawall cylinder
Answer:	Yes
Question:	Will this replace door which has one cylinder and a thumb-latch
Answer:	I used these to replace key part of two separate doors.

Product description

Global Door Controls Double Zinc Mortise Cylinder in Aluminum. Are you afraid your door’s locking system isn’t strong enough? Or your door’s lock requires frequent restorations? Your door’s locking system plays a key role in keeping your premises secure. To avoid these difficulties, it’d be better if you chose Global Door Controls Double Zinc Mortise Cylinder in Aluminum. Its high-quality features will help you significantly in this regard. ★Strong Build Quality Made in aluminum, this single brass mortise cylinder has a high durability. It is made using modern tools and material to ensure that the user doesn’t have to face any difficulty using it. Due to the high-quality of building material, it is able to withstand plenty of harsh treatments. You will not have to worry about the security of your premises with its usage. ★Versatile to Use It has a 1-inch body length and size is compatible with standard doors. This way, this product is able to work well with numerous kinds of doors and applications without any kind of problem. You will not have to think twice before beginning to use this product. It is made in such a way that it can be screwed into the mortise lock body. The diameter is perfect for modern applications. Need More Reasons to Choose Us? Has a brass cylinder which is highly durable and strong. Comes with 2-keys to use. Has the Adams Rite Cam (A/R). Enhances the looks of the door. Comes with an Aluminum finish. Has the standard 1-5/32-inches diameter for versatile usage. Comes with the Stamped Trim Ring of 5/16 inches. You get one component in your package. The dimensions of this product are 1. 8 x 1. 5 x 1. 8 inches. You should get this product now. It’ll help you enhance the security and reduce the hassles regarding your doors.

From the Manufacturer

The Global Mortise Cylinder in Aluminum features a 5 pin Schlage "C" keyway. Threaded to screw into mortise lock body. Features a Standard 1-5/32-Inch Diameter.

• 1-Inch body length
• Includes 2 keys
• Adams rite (a/r) cam
• Includes 5/16-inch stamped trim ring
• Solid brass cylinder
• Features a standard single brass

User questions & answers

Question:	I need a replacement lock for my security door. I was told the current cylinder was 7/8 inch. Does this mean this lock won't work
Answer:	Measure the barrel before you buy a new one. You might have to take it apart to be sure. I think most are a standard size.
Question:	Does this specific order come with two cylinders or is it just a picture of two? The quantity says one, but the title name says "double
Answer:	This order includes a pair (X2) of mortise 1" KA cylinders and two duplicate keys.
Question:	Can I use the two cylinders on the outside only for different doors
Answer:	I do..when I have people leave my business that had a key I change the lock, and I put the old keyed alike set on the inside that way both doors are same key to get in (no extras are floating around by disgruntled ex employees) and I have diff key for inside (have one set made in a pattern or color)
Question:	this includes two cylinders as shown in picture for $16.99 price? or for a pair of 2 cylinder, as shown in this picture is 33.98? You should be more s
Answer:	you get 2 for the 16.99, by for the cheapest on the net. The quality is decent and the locks will do what you want them to.... worth every penny.

• Fits: Chevrolet Silverado 2001-2006
• Please Read product Details For More Compatibility Information
• Left (driver) And Right (Passenger) Side Doors Set.
• Made by Ri-Key Security - High Quality security products
• Come With one matching key - Rekey options Available.

User questions & answers

Question:	Which Cylinder is driver and which is passenger
Answer:	Hello, Both cylinders are the same, it is only the tail-piece that is different between the 2 sides. when you install simply mirro the lock you replace or use the tail-piece that point to the correct side you installing. Hope this info help, please let us know if you need further help.
Question:	mecedese Benz ml320 door lock cylinder
Answer:	Sorry this lock will not fit Mercedes Benz Vehicles.
Question:	Does this fit 2002 2500HD model trucks
Answer:	Thank you for your question, Yes this is he correct part for your truck.
Question:	Will it fit a 2006 2500 Chevy Silverado
Answer:	Thank you for your question, Yes, this is the right cylinder set for 06 Chevy Silverado.

Product features

Secure Your Truck

Ri-Key Security DL711 Locks for Chevrolet Silverado are as secure as it gets. 7 wafers lock system provide you with the security you need for your truck.

Durable Hardware

Top of the line durability, these locks will less you for life-time!

Manufactured with high standards, and close quality control to ensure your truck locks and keys will be working like new at list as long as the vehicles does.