12 best ford lock key blanks

Product description

Replace your lost or broken keyless entry key fob remote with a USARemote Fob.

Fits P/N: CWTWB1U345

Ford:

2008-2014 E-150, E-250, E-350

2007-2015 Edge

2005-2014 Escape

2003-2016 Expedition

2000-2015 Explorer

2001-2010 Explorer Sport Trac

2004-2016 F-150, F-250, F-350 Super Duty

2009-2016 Flex

2006-2012 Focus

2004-2007 Freestar

2005-2007 Freestyle

2006-2012 Fusion

2001-2012 Ranger

2008-2009 Taurus

Lincoln:

2006-2008 Mark LT

2007-2013 MKX

2007-2016 MKZ

2003-2008 Navigator

Mazda:

2001-2008 B2300, B2500, B3000, B4000

2008-2011 Tribute

Mercury:

2003-2004 Marauder

2005-2011 Mariner

2004-2007 Monterey

2000-2010 Mountaineer

2000-2009 Sable

This is a replacement aftermarket part.

• fits Ford, Lincoln, Mercury, Mazda
• Replacement for P/N: CWTWB1U345, CWTWB1U331, CWTWB1U212, GQ43VT11T
• Remote is user programmable with provided step-by-step instructions The key is user programmable if user has 2 original keys. Without 2 original keys user must have new keys cut and programed by a locksmithg or dealership.
• Complete electronic assembly with battery
• Durable long lasting construction, easy to use

User questions & answers

Question:	Do these have a chip in them
Answer:	One I guess
Question:	Do these remotes work on a 2003 Ford Ranger
Answer:	Possibly but the refill itself is just a plastic cylinder of ink. The whole portion that wicks up the ink and the tip are one piece and stay in the marker so I imagine it would look black until enough blue ink had run through it to flush the black out. Might work better if you were covering a lighter color with darker...like red in an old orange or black in an old blue marker. If you dont care that it wont look blue for a while it should work. Also since the tips stay in the marker I found that trimming off fuzzy parts that were wearing was helpful. Id like to refill these a few more times so I trimmed sparingly.
Question:	Will work with a ford-e450? i only have one key/one remote! why are 2 required to program? take key to locksmith then i can program remote
Answer:	NO, the formula is not based on the same types of solvents ans you will probably have an...oil and water don't mix... situation . Im fairly certain expos use a different set of volatile organic compounds. Also these are designed so the whole ink cartridge snaps into the body of the marker while the inside of an expo contains a giant felt wick like a conventional drawing marker. Research the ingredients before you try anything.
Question:	i have just one key lost the other one with the only remote is it nessisary to have the remote to program
Answer:	Yes. And wrapped in a plastic bag too.

Product description

What is it ? This is a replacement transponder chip key that will start your car. Works with the vehicles that are listed in my compatibility section above.

Important note

You must have two working original keys to add a new key with the DIY programming procedure. If you do not have two working keys dealer or locksmith programming is required.

• Replacement Uncut Ignition Chipped Key Transponder Blank
• Easy DIY programming instructions are included with your purchase. In order to use these instructions you must have 2 currently working original keys(not copies). If you do not have two working keys dealer or locksmith programming is required!
• See product description for a complete list of vehicles this part is compatible with. Please make sure your vehicle does not have an ignition guard which would prevent this key from being inserted all the way.
• Compatible with: 40 BIT, 164-R0475, 5904287, 5918997, H84-PT
• This is a replacement part to match the original in form and function

User questions & answers

Question:	Will these work on a 2003 Ford explorer sport xlt
Answer:	Yes
Question:	I have a 2006 mustang key reads my/FYI will it work
Answer:	The key fobs should work fine. I don't think you need the chipped keys. My 2003 F350 uses a standard key/
Question:	how much is shipping on this item
Answer:	You need a working fob to enter programming. Find a reputable locksmith, stay away from the expensive dealerships. A locksmith can provide what you need for half the cost. Hope this helps. Good luck.
Question:	If I only have one original key I have to go to a dealer to be programmed
Answer:	First you put the key in the switch turn the key to start position without operating the motor. Then hold the open remote botton. Then go to off mode repaet this for so many times fast for several times till you heard the doors opened. After that restart your car then it will be OK.

Product description

A quick, easy and affordable way to replace a keyless entry remote key fob. Complete remote with a new battery and electronics installed. DIY step by step programming instructions included with remote and ignition key. Must have two working original keys (will not work with a copied or cloned key from a hardware store) to program a third key using the Do-it-Yourself procedure. If you do not have two working keys, you will need to have key programmed by a dealer or locksmith. Please verify the original key for the vehicle is the same shape as this key

• Fully tested complete uncut ignition key with keyless entry remote, Tech support included with your purchase
• DIY Step by step keyless remote programming instructions and ignition key programming included
• Key programming - requires two working original keys to add a new key, if you do not have two keys dealer or locksmith programming required
• Compatible with CWTWB1U331, GQ43VT11T, CWTWB1U345, CWTWB1U212, 80 Bit Key
• KeylessOption Warranty Card Included with each purchase,This is a replacement part to match the original in form and function

User questions & answers

Question:	How do i determine what key i have or whether or not these are compatible with my key? cwtwb1u331, gq43vt11t, cwtwb1u345, cwtwb1u212, 80 bit key
Answer:	I am Prime with Amazon so, shipping was free.
Question:	Is this keyless entry remote to 2016 totyota rav4? do you have to do anything to your remote
Answer:	I only had one key. I took it to my dealer and they charged me $63 to program two key fobs and cut and program the two keys. Nobody else would program the keys were I live.

Product description

Pair of replacement keyless entry remote with battery and electronics installed. This part is Compatible with the following vehicles and part numbers:

2003-2011 Ford E150 E250 E350

2007-2014 Ford Edge

2001-2014 Ford Escape

2002 Ford Escort

2000-2005 Ford Excursion

1998-2014 Ford Expedition

1998-2014 Ford Explorer

2001-2010 Ford Explorer Sport Trac

1998-2014 Ford F150 F250 F350 (also Super Duty)

2004-2007 Ford Freestyle

1998-2011 Ranger

1998-2003 Ford Windstar

2006-2008 Lincoln Mark LT

1998-2003 Lincoln Navigator

1999-2009 Mazda B2300 B2500 B3000 B4000

2001-2011 Mazda Tribute

2005-2011 Mercury Mariner

2004-2007 Mercury Montery

1998-2010 Mercury Mountaineer



8L3Z15K601B, 8L-3Z-15K-601B, CWTWB1U212, CWTWB1U331, GQ43VT11T, CWTWB1U345, 1788A-FWB1U345, 1470102326, 1788104575

Easy to follow step by step DIY programming instructions are included with your purchase.

• Fully tested complete remotes with a battery installed. Tech support is available with your purchase
• Easy to follow step by step DIY programming instructions are included with your purchase
• Replaces CWTWB1U212, CWTWB1U331, GQ43VT11T, CWTWB1U345
• Warranty Card Included with each purchase
• This is a replacement part to match the original in form and function

User questions & answers

Question:	Will it work for Jeep sahara
Answer:	Yes, I just programmed them (and my old, broken fob) on my 2005 Mustang and they are clear about what years are compatible. It took all of 20 seconds to program the fobs and they all work great.
Question:	Will this work for a 2003 Ford Escape
Answer:	I used it on a 2008 5.4 liter. I do not know if it will fit on a 4.6. What does the Amazon say about the fit?
Question:	Fit toyota prius v
Answer:	The 8l3z 6m280 a is just an old part number but it is the same
Question:	Will this work for a 1995 jeep cherokee sport
Answer:	They are not side specific

Product description

A quick, easy and affordable way to replace a keyless entry remote key fob. Complete remote with a new battery and electronics installed. DIY step by step programming instructions included with remote and ignition key. Must have two working original keys (will not work with a copied or cloned key from a hardware store) to program a third key using the Do-it-Yourself procedure. If you do not have two working keys, you will need to have key programmed by a dealer or locksmith. Please verify the original key for the vehicle is the same shape as this key

• Fully tested complete uncut ignition key with keyless entry remote, Tech support included with your purchase
• DIY Step by step keyless remote programming instructions and ignition key programming included
• Key programming - requires two working original keys to add a new key, if you do not have two keys dealer or locksmith programming required
• Compatible with CWTWB1U345, CWTWB1U331, CWTWB1U212, CWTWB1U322, GQ43VT11T, 4C Key
• KeylessOption Warranty Card Included with each purchase,This is a replacement part to match the original in form and function

User questions & answers

Question:	Do these keys have the micro chip in them
Answer:	It goes by year, make and model of car. If your car is listed then it is one for you. If you have a 2012 or newer you can program key yourself but key fob you’ll have to go to deal. At least with most models.
Question:	Why do i need 2 keys? I only have 1 thats why i need another
Answer:	No
Question:	Why do i need 2 keys? I only have 1 thats why i need another
Answer:	I purchased these for a 2005 Ford Explr and they worked. The Amazon sight says they will work for 2003 also. During programming pay close attention to steps (it even makes a difference whether you do it with the the diver door open or closed -- try one way, if fail try the other).
Question:	are these 40 bit chips? for the early f
Answer:	Yes

• This Keyless2Go replacement keyless entry remote key comes with FREE easy to follow Do-It-Yourself programming instructions (2 working original keys required). Plus FREE tech support is available with every purchase.
• Compatible with wide range of Ford, Lincoln and Mercury vehicles including Escape, Edge, Explorer, Expedition, Fusion, Focus, Town Car, Navigator and more. Please check product description and vehicle fitment tool for fitment information..
• A website link to free DIY programming instructions will be provided with every order. 2 working original keys required in order to perform the DIY programming. If you do not have 2 keys than you will need to get this remote key programmed at an automotive locksmith or a dealer (remote portion can be self-programmed with 1 key but the key will not start the vehicle).
• WILL NOT FIT if your vehicle has a plastic collar or guard around ignition. Replacement for part numbers: OUC6000022, 164-R7040.
• New complete working remote key with all electronics, batteries and transponder chip included plus FREE tech support. Every single remote is tested before it is sent to make sure it is transmitting

User questions & answers

Question:	the car has 2 keys but I only have one can I program a new one
Answer:	Yes
Question:	My key and remote control is separated(explorer 2007), will it work if I take the chip out and put in the new key
Answer:	Generally, people order more keys when they get down to one key left. Unfortunately, you can't self program more keys with only one working key - you need 2 working keys. As a result, you'll need to get at least 1 of the keys cut and programmed by a capable locksmith (usually about $100) or Ford dealer (more $$). The additional key is to make a 3rd key as a spare so you never have to pay the programming fee again.
Question:	fusion. i have one original remote key, and second key was programmed and provided by the dealer. can i buy & program diy
Answer:	You need 2 to program the new keys. If you do not have 2 original keys then you have to go to a dealership or the nearest hardware store that does programming. You can look up online how to bypass the pats system which is what I did.
Question:	I just have a basic spare key for my car with no buttons can i still get these buttons programmed? also can i take off the stupid mykey system with this key bc it’s not the same key or dose it have to be the main key
Answer:	Not sure what bit they are but if you “bypass” the security system none of that will matter.

Product features

Self-Programmable Remote Car Key Replacement

This is a Brand New replacement Remote Head Key fob for select Ford vehicles.

This is a Keyless2Go replacement remote key fob that will work and function just like the original one.

PROGRAMMING:

A website link to free DIY programming instructions will be provided with every order.

Programming the key:

In order to perform the DIY programming for the key, you must already have 2 working unique (not cloned) keys. If you only have 1 or no keys for the vehicle then you will need to get this remote programmed by a qualified auto locksmith or dealership. Also, your new unprogrammed key must be cut prior to performing this procedure.

Programming the remote:

You need to have 1 working key.

Compatibility:

Please be sure to check the vehicle compatible with the guide below. WILL NOT WORK if your ignition has a plastic collar or guard.

2012 Ford owners - please make sure to match the key blade with our listing image.

Fitment: (your vehicle must already be equipped with keyless entry for the remote to work)

2000 - 2009 Mercury Sable

2005 - 2007 Mercury Montego

2006 - 2011 Mercury Milan

2005 - 2011 Mercury Mariner

2005 - 2011 Mercury Grand Marquis

2004 - 2011 Lincoln Town Car

2004 - 2012 Lincoln Navigator

2006 - 2008 Lincoln Mark LT

2004 - 2006 Lincoln LS

2004 - 2005 Lincoln Aviator

2004 - 2005 Ford Thunderbird

2000 - 2012 Ford Taurus

2005 - 2013 Ford Mustang

2006 - 2011 Ford Fusion

2006 - 2011 Ford Focus

2009 - 2012 Ford Flex

2005 - 2007 Ford Five Hundred 500

2001 - 2010 Ford Explorer Sport

2001 - 2012 Ford Explorer

2003 - 2012 Ford Expedition

2006 - 2011 Ford Escape

2007 - 2011 Ford Edge

2004 - 2011 Ford Crown Victoria

***We cannot certify vehicle Compatible with outside of USA and Canada***

These keys are NOT ABLE TO BE CLONED. If you have any questions about cloning please reach out to us before you purchase.

DISCLAIMER

All product names, brands, logos and or other trademarks within our sales information are the property of their respective owners. These are used to simplify the identification of the proper parts for select vehicles. None of the companies or trademarks affiliate with, endorse or sponsor us or our products.

Product description

KeylessOption is a quick, easy and affordable way to replace your keyless entry remote control car key fob. Our products are constructed with high quality materials for long lasting durability. This is a replacement part to match the original in form and function. DIY step by step programming instructions included for the keyless remote. Key programming instructions require two working original keys. Key must be cut prior to programming. If two original keys are not present dealer or locksmith programming is required . Please use the parts finder to ensure this key is compatible with your vehicle. Please also visually compare this part and part number to the original remote for the vehicle.

• Fully tested complete uncut ignition transponder key with keyless entry remote, tech support included with your purchase
• DIY step by step programming insturctions included for keyless entry remote
• Key programming requires two working original keys to program a new key, if you do not have two keys dealer or locksmith programming required
• Compatible with: CWTWB1U793, 5912560, 164-R8070
• KeylessOption warranty card Included with each purchase, This is a replacement part to match the original in form and function

User questions & answers

Question:	does this work with a "S" key? Picture shows a "SA" key
Answer:	I bought one and only had one key. You'll need to bring it to a dealer. Once you get two programmed, You can do others yourself. I would get a third and keep one at home. If you lose the copy you can always make others. It cost me $50 to get mine done. There are cheaper places than dealerships.
Question:	If I have 1 working key, and I take this one to my dealer can I have it programmed by them
Answer:	My 2006 Expedition came with two separate keys and one remote. I was able to program this one piece key and remote following the included instructions.
Question:	I have a 2006 F-150 Lariat. The key VOB is a CWTWB1U331will this work
Answer:	I am not sure that if you buy other keys that you can program them yourself.
Question:	After programming the remote does not work it starts the vehicle wgat should i do. I already cycled the key 8 times still did not work
Answer:	No you need 2 keys to be able to program your new key but you can call your local mobil car key guy and they will do it for you I paid $30.00 I guess depend where you live

• These are 2 brand new uncut transponder keys for select Ford, Lincoln, Mercury, & Mazda vehicles. Please check product description for vehicle fit guide.
• A website link to free DIY programming instructions will be provided with every order. 2 original keys required in order to do self-programming. If you only have 1 or no keys then you will need to get this key programmed by an automotive locksmith or dealership.
• Replacement for part numbers: H72-PT, 597602, 598333, 690212, 599490, 599104, 599182, 597603
• CANADIAN VEHICLES: vehicles made for Canadian market do not have onboard DIY programming available and will require dealer/locksmith programming; please contact us before purchasing if you have any questions.

User questions & answers

Question:	How to get repair service included
Answer:	It didn’t work for me. Key fob not working only works for ignition switch only
Question:	you must already have 2 working unique (not cloned) keys in order to perform diy programming". what does "not cloned" mean? i have 1 orig./1 copy key
Answer:	I only had one key and brought it to a locksmith. They cut the key and programmed the fob to open the doors. Only $30 and 15 minutes. Works great.
Question:	I lost the chip on my ignition key for my ford explorer and i only have one key how do i get a replacement chip and/or new key
Answer:	I have the 2005 F-150 Lariat, it works for mine! I took it to the local ford dealer they programmed it for $70 or so
Question:	Is there a difference between a h72 and an h72-pt. my vehicle is a 1999 explorer and it doesn't seem it will program via the one key method
Answer:	I had mine programmed by a locksmith at the dealership where we bought the car, I couldn't program it myself because we only had one master key.

Product features

These are 2 Brand New Uncut Keys with new transponder

These are 2 Brand New Uncut Keys with new transponder 4C chip for select Ford, Lincoln, Mercury, & Mazda vehicles. 100% new, never used key.

These are Keyless2Go transponder keys that will work and function just like the original one.

A website link to free DIY programming instructions will be provided with every order. All you need to do is get this cut key at your local locksmith.

You must already have 2 working unique (not cloned) keys in order to perform DIY programming. If you only have 1 or no keys then you will need to get this key programmed by an automotive locksmith or dealership.

Compatible with:

1998-2002 Ford Crown Victoria

2000-2005 Ford Excursion

1998-2002 Ford Expedition

1998-2000 Ford Explorer

2005-2006 Ford GT

1999-2003 Ford F150/F250

2004 Ford F150/F250 Heritage

1996-2004 Ford Mustang

1999-2000 Ford Ranger

1998-1999 Ford Taurus

1999-2000 Ford Windstar

2002 Lincoln Blackwood

1998-2002 Lincoln Continental

1997-2002 Lincoln Navigator

1998-2002 Lincoln Town car

1998-2002 Mercury Grand Marquis

1998-2000 Mercury Mountaineer

1996-1999 Mercury Sable

1999-2000 Mazda B-Series Pickup

***We cannot certify vehicle Compatible with: outside of USA and Canada***

This key is NOT ABLE TO BE CLONED. If you have any questions about cloning please reach out to us before you purchase.

DISCLAIMER

All product names, brands, logos and or other trademarks within our sales information are the property of their respective owners. These are used to simplify the identification of the proper parts for a vehicle. None of the companies or trademarks affiliate with, endorse or sponsor us or our products.

Product description

Replace your lost or broken keyless entry key fob remote with a USA remote fob. Fits p/n: Cwtwb1u331 gq43vt11t cwtwb1u345ford:1999-2014 econoline e150 e250 e3502007-2015 edge2001-2014 escape2002 escort2000-2005 excursion1998-2016 expedition1998-2015 explorer2001-2010 explorer sport trac1998-2001 ranger1998-2016 f-150, f-250, f-3502009-2016 flex2006-2012 focus2004-2007 freestar2005-2007 freestyle2006-2012 fusion1998-2012 ranger2008-2009 taurus1998-2003 windstarlincoln:2002-2003 blackwood2007-2013 mkx2007-2016 mkz2006-2008 mark lt1998-2008 navigatormazda:2001-2010 b23001998-2001 b25001998-2008 b30001998-2010 b4000 2001-2011 tributemercury:2003-2004 marauder2005-2011 mariner2004-2007 monterey1998-2010 mountaineer1998-2009 sable.

• fits Ford, Lincoln, Mercury, Mazda F150 F250 F350 Escape Expedition Explorer Ranger
• Replacement for P/N: CWTWB1U345, CWTWB1U331, CWTWB1U212, GQ43VT11T
• User programmable with provided step-by-step instructions
• Complete electronic assembly with battery
• Durable long lasting construction, easy to use

User questions & answers

Question:	Does this work for 2016 Camry for sure
Answer:	do locally online keyshop will help
Question:	Will this work for a 2000 ford escape
Answer:	You just need two working keys to program another key if you only have one key then off to the dealer you go to spend roughly $125.00
Question:	Can i program by myself for Toyota Yaris
Answer:	You can buy a replacement at a ford dealer. Most dealers just need proof of ownership and vin# and they can make you a key. Its the cheapest route I know of. You can always call a locksmith and see if they can do it.
Question:	Will this reote work with a code alarm security system in my 2002 ford f-150? if so, how do you programm it
Answer:	I don't believe the one key method applies to your vehicle. I've used FORSCAN to program these keys to both my vehicles. Not difficult but does require a laptop, the FORSCAN software which is free and the appropriate obd 2 adapter which can be found on Amazon as well.

• This listing is for 2 brand new replacement remote head key fobs with uncut key blade for select Ford vehicles. Please check product description below for vehicle fit guide.
• Every single remote is tested before it is sent to make sure it is transmitting
• A website link to free DIY programming instructions will be provided with every order. 2 working original keys required in order to perform the DIY programming. If you do not have 2 keys than you will need to get this remote programmed at an automotive locksmith or dealer
• Replacement for part numbers: FCC ID: OUCD6000022, Part number: 164-R8046
• New complete working remote key with all electronics and batteries included plus FREE tech support.

User questions & answers

Question:	I have a warranty issue . how do i contact the seller? one of the keys i received was faulty. thanks
Answer:	Mine work for a F150 truck and they are easy to program and work great. YouTube programming video is 1st rate. I don't think they'll work on a Toyota but you should check YouTube to make sure
Question:	How to pgm? did not work on transit . followed the ford user manual and had no response when selecting this key fob for programming. i have two keys
Answer:	Unless it says so on the item caption, most likely not. To make sure, register your vehicle's VIN number with Amazon or Make, Model, Year. And then search "key fobs" for that vehicle. Amazon will return to you only key fobs that are compatible with your registered vehicle. I've never had any compatibility issues with this method. From key fobs to alternators for my old Ford E150. Everything I ordered was drop-in and always worked the first time.
Question:	do i have a good afternoon ford focus titanium 2012 key this is for that model
Answer:	I do no know. You would have to look in a Manuel for that type car. I bought for a 2003 F-150 and could program myself. However the package case with a card to say if you needed help you could log onto a website and it could walk you through the programming. I just don’t know about Toyota.
Question:	Your description says these are only good for Transit up to 2017, will they work for 2018 Transit
Answer:	With an after market alarm system, you may not be able to. Check with the system company. They will be the ones to refer to.

Product features

Brand New replacement Remote Key Fob

This a Brand new replacement 4 Button Remote Head Key with Side Mill (High Security) Blade and 4D63 80 Bit Chip for select Ford Fiesta vehicles.

This is Keyless2Go replacement remote key fob that will work and function just like the original one.

PROGRAMMING:

This remote head key must be cut and programmed in order to function.

A website link to free DIY programming instructions will be provided with every order.

Programming key portion:

In order to perform the DIY programming for the key, you must already have 2 working unique (not cloned) keys. If you only have 1 or no keys for the vehicle then you will need to get this remote programmed by a qualified auto locksmith or dealership. Also, your new unprogrammed key must be cut prior to performing this procedure.

Programming remote portion:

You need to have 1 working key.

Compatible with:

This remote key will only work if your original key looks like the one on the picture.

2013-2019 Ford C-Max

2013-2019 Ford Escape

2012-2019 Ford Focus

2015-2018 Ford Fiesta

2014-2017 Ford Transit*

2014-2018 Ford Transit Connect

*Ford Transit - trunk button will work to operate the sliding door

These keys are NOT ABLE TO BE CLONED. If you have any questions about cloning please reach to us before you purchase.

DISCLAIMER

All product names, brands, logos and or other trademarks within our sales information are the property of their respective owners. These are used to simplify the identification of the proper parts for a particular vehicle. None of the companies or trademarks affiliate with, endorse or sponsor us or our products.

Product description

This listing is for 2(Pair) NEW FACTORY ORIGINAL Ford Transponder Chip Ignition Master Key Blanks FORD JEWEL OVAL LOGO "SA" On Blade For Ford Crown Victoria 2003-2012 Ford Escape 2005-2012 Ford Expedition 2003-2015 Ford Explorer 2002-2010 Ford Explorer 2011-2015(NOT for PushToStart Models) Ford Explorer Sport Trac 2001-2010 Ford F-150 2004-2014 Ford F-250 2004-2016 Ford F-350 2004-2016 Ford Five Hundred 2005-2007 Ford Focus 2006-2011 Ford Free Star 2004-2007 Ford Freestyle 2004-2007 Ford Mustang 2005-2014 Ford Ranger 2001-2015 This key is compatible with all vehicles listed in our compatibility table above. PROGRAMMING SECTION: This type of vehicle requires you to have 2 (TWO) existing keys that start the vehicle in order to program this key yourself. If you currently only have 1 (one) key (or zero), you will NOT be able to program this key yourself - it will need to be programmed by a dealer or qualified locksmith. keep in mind locksmiths usually charge much less to stay competitive. This is why it’s a good idea to have three keys that will start the vehicle at all times. The programming is quick, easy and no tools are required. Once purchased, please email us with the year make and model of your vehicle and we will send email you back with the programming instructions ADDITIONAL INFORMATION When purchasing your item from us you can always be sure that you will be handled with the up most care. We fully test your item just prior to shipping to make sure that it is transmitting a strong proper signal. Customer Service is our number 1 priority here !

• Ford Crown Victoria 2003-2012 ; Ford Escape 2005-2012 ; Ford Expedition 2003-2015
• Ford Explorer 2002-2010 ; Ford Explorer 2011-2015(NOT for PushToStart Models) ; Ford Explorer Sport Trac 2001-2010
• Ford Five Hundred 2005-2007 ; Ford Focus 2006-2011 ; Ford Freestar 2004-2007
• Ford Freestyle 2004-2007 ; Ford Mustang 2005-2014 ; Ford F-150 2004-2014 ; Ford F-250 2004-2016 ; Ford F-350 2004-2016
• Ford Ranger 2001-2015

User questions & answers

Question:	Will this work for a 2001 ford explorer
Answer:	If a key shop can't program it. (you need 2 original kets) buy one from them and let them do it. Ford uses keys as a profit center.
Question:	does this item work on a 2006 Ranger
Answer:	According to the Ford dealer, the keys are not compatible.
Question:	Will it work on 2011 ranger
Answer:	I have a 2013 model. I would suggest checking with dealer
Question:	Hello, is the item still in stock
Answer:	Mine is a 25 sorry cant answer

Product description

Ford Oval Logo



Ford Logo H72-PT Transponder Key



This key will require cutting to match the locks on your the car. This key has an electronic chip (transponder) built into the head of the key that is hidden in the plastic shape of the key. This key will not start your car until it is programmed into your cars computer system. We recommend going to your local locksmith to have your keys cut and keys programmed. Most Locksmiths have the knowledge and equipment to keep you on the road.

• KEYS > AUTO - Transponder Keys (with micro chip)
• LIST OF MANUFACTURERS > FORD
• LIST OF MANUFACTURERS > FORD > Ford Transponder Keys
• STRATTEC > STRATTEC Keys / Remotes > FORD-LINCOLN-MERCURY
• LIST OF MANUFACTURERS
• STRATTEC > Ford, Lincoln & Mercury
• STRATTEC > Ford, Lincoln & Mercury > Keys

User questions & answers

Question:	What model and year can this key support
Answer:	yes, just use the key you have and go to a place that cut keys
Question:	Would this fit a 2000 ford ranger 4.0 4x
Answer:	I got the cut and programmed at a local Ace for my 2004 Ranger. I don't think there's any difference in the ignition on your 2006.
Question:	Will this fit my 2003 ford mustang mach1? the others i gotten have been 2cm short
Answer:	It says in the product description that it works with the 2001-2015 Ford Ranger (although I believe the last Ranger for North America was 2011).
Question:	Will this work on a Ford Ecosport
Answer:	Yes