12 best hoppy brake controls

Product description

Towing large trailers hinders your ability to stop quickly, protect and control your trailer and vehicle investments with Hoppy electronic brake systems, Hoppy electronic brake controls send an increasing amount of power to the trailer brakes the longer the brake pedal is pressed

• Most state laws require the use of electric brakes on all trailers weighing over 3,000 pounds
• Digital display feature, numerical from 5% to 99%
• Set the exact percentage of brake power you desire
• Short proof protection from trailer brake wire shorts and brake light shorts
• Error codes indicate a short and identify type of short

User questions & answers

Question:	It says that this will not fit my 2015 4Runner. Why not? Can i purchase something to make it work
Answer:	Kali The 47297 will work on your 2015 4Runner but you will need harness number 47815 to plug it into your vehicle. If you have any more questions please call 1-800-470-2287 Monday-Friday, 8-5 central time. Thanks
Question:	Is this a plug and play unit for a 2006 f250, or do i need to purchase a wire/adapter kit
Answer:	I put it in a 1999 GMC and purchased the adapter and pluged it in and ran a a hot wire to the battery which is recommended. My brother in law bought the adapter for his 04 F250 so yes you need to get the,adapter for your model and then it is plug and play except for the hot wire.
Question:	do you need another plug? there are bare wires I don't know what to do with. I have a 2004 tundra
Answer:	You should be able to purchase a towing harness from your local Toyota dealership. This will plug into the vehicle harness in your truck and will wire to your new brake controller.
Question:	How to Adjust brake control to match trailer
Answer:	On my controller, I have a + and - button and a red button. What I did was pull my trailer to about 25 mph then applied the red button, which works just the trailer brakes. The first time, it locked up the trailer brakes. Then I hit the - button and tried again. I did this until the brakes wouldn't lock up. Then I started using the truck brakes, and adjusting the trailer brakes, using the + &- buttons on the controller, until I could feel the trailer brakes applying with the same amount of force as the truck brakes. This took a little trial and error, but if you take your time it can be done. Hope this helps.

Product features

Insight Brake Control

Trucks continue to evolve to meet consumer needs. It’s time for brake controls to do the same. The Insight brake control solves the problem of inconvenient mounting, out-of-reach controls and difficult to see displays.

The innovative Flex-Mount versatility installs with absolutely no tools and sets the standards for performance, control and ease of use.

Reinforcing consumer confidence, the Insight is backed by a lifetime warranty, leaving you certain that this controller will perform day in and day out.

Flex-Display

Creates the perfect install for any vehicle and helps keep eyes on the road.

Flex-Control

Flexible installation brings manual controls within reach.

Smart Box

Mounts out of the way.

Product description

Hopkins Manufacturing Corporation makes your towing experience simpler and more rewarding through innovation and value, offering a variety of towing solutions including vehicle wiring kits, adapters, vehicle and trailer connectors, breakaway systems, and much more. Today, more than 40 percentage of retail category sales are generated from Hopkins innovations. As the number one brand in towing electrical products, Hopkins Towing Solutions has provided consumers with innovation, durability, and performance for over 20 years. Hopkins' Agility Proportional Brake Control is designed to control the braking power for safe and efficient braking. It features an LED light which indicates the power required for controlling the vehicle and the trailer. A digital display will make setting this brake control a snap, while five on-the-fly sensitivity settings allow for adjustment of trailer weights and weather at the press of a button. These connectors are designed for short-proof protection and can be operated at flexible angles. Most states and provinces require a trailer brake controller based on the weight of the trailer. This product requires and additional wiring harness for installation. Harness is sold separately and is vehicle specific.

• Short-proof protection from electric brake wire shorts
• Flexible operating angles and five sensitivity adjustments
• Features an LED light for ultimate efficiency and control
• Highly durable and reliable connectors controls up to 8 trailer brakes
• Simple plug-in installation (Additional Wiring Harness required, per fitment and sold separately)

User questions & answers

Question:	Will this work for a 2011 bmw x5? i'm not sure if bmw uses a male 4 plug
Answer:	No idea. Call your local Beemer dealer or RV dealer. Or, make it work with this http://www.amazon.com/Hopkins-47275-Brake-Control-Installation/dp/B000CMKG6Y/ref=pd_sim_263_6?ie=UTF8&refRID=1SQPJ8NHS80F4KMJ0QR9
Question:	Will this plug in to my 2012 chevy z
Answer:	You need pigtail adapter Hopkins. Look on there Website for the model number.
Question:	is this compatible with 2017 4runner and what adapter would I need? Thanks
Answer:	Dear James G., That brake controller will work on any vehicle. You will need brake control connector 47815. If there are any other questions that we can answer, feel free to call our Tech Support Line at 800-835-0129. We are here Monday-Friday 8:00am-5:00pm CST. Thank you.
Question:	What is a Hoppy
Answer:	out doors

Product features

Insight Brake Control

Trucks continue to evolve to meet consumer needs. It’s time for brake controls to do the same. The Insight brake control solves the problem of inconvenient mounting, out-of-reach controls and difficult to see displays.

The innovative Flex-Mount versatility installs with absolutely no tools and sets the standards for performance, control and ease of use.

Reinforcing consumer confidence, the Insight is backed by a lifetime warranty, leaving you certain that this controller will perform day in and day out.

Flex-Display

Creates the perfect install for any vehicle and helps keep eyes on the road.

Flex-Control

Flexible installation brings manual controls within reach.

Smart Box

Mounts out of the way.

Product description

Hopkins Manufacturing Corporation makes your towing experience simpler and more rewarding through innovation and value. Hopkins offers a variety of towing solutions including vehicle wiring kits, adapters, vehicle and trailer connectors, breakaway systems, and much more. Today, more than 40 percentage of retail category sales are generated from Hopkins innovations. Hopkins INSIGHT brake control works on trailers with electric or hydraulic brakes. Features advanced proportional technology that mirrors the braking of the tow vehicle for safe, smooth stops, and short-proof protection for up to 8 trailer brakes. With multiple mounting locations in your vehicle, the separate components mount where you want them, with no drilling required. Allows you to keep your eyes on the road, with controls in easy reach. Includes digital power and sensitivity settings.

• Advanced brake technology that mirrors the braking of the tow vehicle for safe, smooth stops
• Works on trailers with electric or hydraulic brakes
• Digital power and 7 sensitivity settings with intuitive vertical manual slide
• Short proof protection for up to 8 trailer brakes
• Simple installation with separate components that mount wherever you want them and no tools or drilling required

User questions & answers

Question:	It says that this will not fit my 2015 4Runner. Why not? Can i purchase something to make it work
Answer:	Kali The 47297 will work on your 2015 4Runner but you will need harness number 47815 to plug it into your vehicle. If you have any more questions please call 1-800-470-2287 Monday-Friday, 8-5 central time. Thanks
Question:	Is this a plug and play unit for a 2006 f250, or do i need to purchase a wire/adapter kit
Answer:	I put it in a 1999 GMC and purchased the adapter and pluged it in and ran a a hot wire to the battery which is recommended. My brother in law bought the adapter for his 04 F250 so yes you need to get the,adapter for your model and then it is plug and play except for the hot wire.
Question:	do you need another plug? there are bare wires I don't know what to do with. I have a 2004 tundra
Answer:	You should be able to purchase a towing harness from your local Toyota dealership. This will plug into the vehicle harness in your truck and will wire to your new brake controller.
Question:	How to Adjust brake control to match trailer
Answer:	On my controller, I have a + and - button and a red button. What I did was pull my trailer to about 25 mph then applied the red button, which works just the trailer brakes. The first time, it locked up the trailer brakes. Then I hit the - button and tried again. I did this until the brakes wouldn't lock up. Then I started using the truck brakes, and adjusting the trailer brakes, using the + &- buttons on the controller, until I could feel the trailer brakes applying with the same amount of force as the truck brakes. This took a little trial and error, but if you take your time it can be done. Hope this helps.

Product features

Insight Brake Control

Trucks continue to evolve to meet consumer needs. It’s time for brake controls to do the same. The INSIGHT brake control solves the problem of inconvenient mounting, out-of-reach controls and difficult to see displays.

The innovative FLEX-MOUNT versatility installs with absolutely no tools and sets the standards for performance, control and ease of use.

Reinforcing consumer confidence, the INSIGHT is backed by a lifetime warranty, leaving you certain that this controller will perform day in and day out.

Flex-Display

Creates the perfect install for any vehicle and helps keep eyes on the road.

Flex-Control

Flexible installation brings manual controls within reach.

Smart Box

Mounts out of the way.

Product description

Hopkins Manufacturing Corporation makes your towing experience simpler and more rewarding through innovation and value. Hopkins offers a variety of towing solutions including vehicle wiring kits, adapters, vehicle and trailer connectors, breakaway systems and much more. Today, more than 40 percentage of retail category sales are generated from Hopkins innovations. Take the hassle out of installing your electronic brake controls with Hopkins' Hoppy vehicle specific, Plug-In Simple connectors. No more running wires through the vehicle's fire wall or searching for the stop switch.

• For vehicles equipped with a factory tow package
• Just Plug-In and go
• Utilization of OEM connectors ensures a perfect fit
• No cutting, no splicing, no worries
• Quick and easy to install

User questions & answers

Question:	Does this adapter fit 2014 Dodge Ram
Answer:	Betty The 47755 will not work on the 2014 Ram. You will need connector number 53055. This will plug into the 2013-14 Ram and the other end will plug into any of our brake controllers. If you have any more questions please call 1-800-835-0129 Monday-Friday, 8-5 central time. Thanks
Question:	Does this fit a 2006 Dodge Dakota
Answer:	Ron, Thanks for your question regarding Hopkins Towing Solutions part #47755. That Brake Control Connector will fit your 2006 Dodge Dakota to connect a Hopkins Brake Control. We appreciate your support of Hopkins Towing Solutions. If there are any other questions that we can answer, feel free to call our Tech Support Line at 800-835-0129. We are here Monday-Friday 8:00am-5:00pm CST. Thank you,
Question:	Does this fit a fit a 2000 dodge 1500. With factory tow package
Answer:	I have a 1999 Dodge 1500 Plugged right in fine
Question:	does this fit a 2018 dodge ram
Answer:	Donnie b, Thanks for your question regarding Hopkins part #47755. For a 2018 Dodge Ram you would need Brake Control Connector #53056. Brake Control Connector #47755 is for older Dodge Pickups. We appreciate your support of Hopkins Towing Solutions. If there are any other questions that we can answer, feel free to call our Tech Support Line at 800-835-0129. We are here Monday-Friday 8:00am-5:00pm CST. Thank you,

Product description

Hopkins Manufacturing Corporation makes your towing experience simpler and more rewarding through innovation and value. Hopkins offers a variety of towing solutions including vehicle wiring kits, adapters, vehicle and trailer connectors, breakaway systems and much more. Today, more than 40 percentage of retail category sales are generated from Hopkins innovations. Take the hassle out of installing your electronic brake controls with Hopkins' Hoppy vehicle specific, Plug-In Simple connectors. No more running wires through the vehicle's fire wall or searching for the stop switch.

• For vehicles equipped with a factory tow package
• Just Plug-In and go
• Utilization of OEM connectors ensures a perfect fit
• No cutting, no splicing, no worries
• Quick and easy to install

User questions & answers

Question:	It says fits my 09 tundra but doesn’t fit oem plug. but fits my hopskin 47284. what do i need
Answer:	James H., Thanks for your question regarding Hopkins #47715. This plug is designed to plug into the Ford factory tow package. For a 2009 Toyota Tundra, a #47815 would be needed. We appreciate your support of Hopkins Towing Solutions. If there are any other questions that we can answer, feel free to call our Tech Support Line at 800-835-0129. We are here Monday-Friday 8:00am-5:00pm CST. Thank you,
Question:	Will this fit 2010 toyota tacoma
Answer:	Nick~~The 47715 is not the part you need. For a 2010 Toyota Tacoma the brake control connector that will fit your vehicle is part number 47815. If you have any other questions, give us a call on the Tech support line at 800-835-0129.
Question:	Will this fit 2011 Dodge Ram
Answer:	Ewing The 47715 will not fit that vehicle. For a 2011 Ram you will need part number 53015. If you have any more questions please call 1-800-835-0129 Monday-Friday, 8-5 central time. Thanks
Question:	do you have to run a wire from hitch to controller or will 4 pin to 7 blade work
Answer:	Ma'am, this connector (Hopkins 47715) connects under your dash board on the driver side if your vehicle has the tow package pre-wiring harness. It doesn't connect outside never the hitch. Under your driver side dash near the brake pedal you should see a female connector where the 6 pin male connector form the Hopkins 47715 connects to. The 4-pin male side plugs into your brake controller. I hope this helps.

Product description

The CURT Echo mobile trailer brake controller is a Bluetooth-enabled device that wirelessly connects to your smartphone and allows you to control and monitor all trailer brake activity right from your device. It features a simple, plug-and-play installation, a portable design to easily switch between vehicles and a highly durable construction to outlast the elements. The Echo brake controller brings your towing experience into the modern age. Powered by Bluetooth, it wirelessly connects to your smartphone without any extra wiring harnesses or modules required. Simply download the Smart Control app on your Apple iOS or Android OS device, plug the Echo into your vehicle and you're ready to start towing. The app allows you to create multiple vehicle-trailer profiles for different towing situations. Installing the Echo trailer brake controller is truly a plug-and-play experience. It is designed to insert in between the vehicle-trailer wiring connection and is compatible with any industry-standard 7-way RV blade plug. This design also allows the Echo to be easily transferred between vehicles, making it perfect for fleet vehicles or multiple-vehicle owners. The Echo mobile trailer brake controller is built to withstand the outdoor elements, whether you're towing through rain, snow or sunshine. It features a potted enclosure. This means the interior of the Echo is filled with an epoxy resin that covers the internal electronics and seals them off from dirt and moisture. This promotes long-lasting durability and also helps reduce vibration. To further enhance the connection, the connector port of the Echo is equipped with a retention strap and locking tab to firmly seat in the 7-way vehicle socket. The CURT Echo mobile brake controller operates with a tri-axis circuit for smooth stops going up or down a hill, and it is able to operate up to two to four trailer brakes at a time (one to two axles). It is also compatible with cruise control and ABS brakes.

• PORTABLE. The Echo trailer brake controller has a non-invasive install and is easily transferrable from one vehicle to another. It plugs into any 7-way connector, wirelessly links to your smartphone using Bluetooth
• SMARTPHONE-READY. The Echo brake controller wirelessly syncs with Apple or Android smartphone, turning it into a brake controller interface with the Smart Control app (Warning: Avoid distracted driving. Only make adjustments when vehicle is stationary)
• ZERO-TOOL INSTALL. Installing this aftermarket trailer brake controller is as easy as plugging in a 7-way trailer wiring connector. It requires no tools, no extra wires and no hardware. A locking tab and strap keep it firmly connected
• HIGHLY RESPONSIVE. Echo uses a triple-axis accelerometer to provide smooth, safe braking. It maintains responsive braking, even when your phone screen is locked, receives incoming calls or if the Bluetooth connection is lost
• VERSATILE. This electronic trailer brake controller easily transfers between vehicles and trailers and works on virtually any trailer with 1 to 2 axles (2 to 4 brakes). It is also fully compatible with cruise control, anti-lock brakes, low-voltage systems

User questions & answers

Question:	Does this work with adaptive cruise control
Answer:	The unit will fit, but you need to check to see what cable is correct for your Toyota. The cable will attach to the controller, and connect it to a trailer brake port usually found under the dash of your rig. The Tekonsha site has a tool that will help you determine what connector you need for your vehicle. Then you can order the connector cable on Amazon.
Question:	I have a 4 way plug spliced into a 7 way plug that does my lights etc for what will be my brake pin csn i run a live 12 volt feed to plug
Answer:	When your order it you put in what kind of vehicle you have
Question:	Is it possible to use in a rental environment, where each user downloads the app for a rental, uses the receiver and then the next user does the same
Answer:	John, it will work. I guess you are saying if you are installing this in. I just use it and it work great. I call Tekonsha tech support with question. Since my truck does not have the plug. I had to hard wire my own plug that came with the kit. One wire I did not have to use. Out of the five wires I only had to use 4 of them. The lady email me instruction for my 2008 Chevy 1500. She is very helpful. I tow a toy hauler with two motorcycle. Three setting plus to go to manual setting which I like. Plus there is a button on the right that I use like a trolly brake. (Use to drive a tractor). With that button, slowly pushing on it, I was using just the trailer to stop me or to straighten out the trailer if it sway.
Question:	For the accelerometer to work properly, does the unit have to be installed in a certain orientation? Promaster 7 way connector is rotated 90 degrees
Answer:	You need to get the wire harness for your make of vehicle. The adaptor harnesses are on the Amazon page for the Controller. They are less than $15.00. This is a good controller.

Product features

Bluetooth-enabled, wireless brake controller

The Echo mobile trailer brake controller is the world’s first Bluetooth-enabled, wireless brake controller. It simply plugs into your vehicle-trailer 7-way connection and utilizes your smartphone as a brake control interface.

Echo operates with a powerful triple-axis accelerometer for smooth, responsive braking, and it is easily transferable from one vehicle to another.

Wireless portability

Fast, plug-and-play operation makes it easy to switch Echo between vehicles.

Bluetooth-enabled

Echo wirelessly connects to Android and Apple phones, using the Smart Control app.

Tool-free install

Echo requires no permanent, invasive installation – simply plug it into the 7-way connection.

Step 1

Download the Echo Smart Control app from the App Store or Google Play.

Step 2

Insert Echo between the vehicle and trailer 7-way wiring connectors.

Step 3

Configure your settings and tow! Echo will remember multiple vehicle-trailer combinations.

Device and vehicle memory

You don’t have to memorize the settings for each of your trailers or redo the setup every time you switch trailers. Echo remembers them for you! The Smart Control app is able to store multiple profiles for convenient access every time.

Control at your fingertips

The customizable Smart Control app gives you the power to control and monitor all brake settings right from your smartphone. You can calibrate output, manually apply the brakes and much more.

Safety notifications

The Echo mobile trailer brake controller sends notifications to your smartphone if ever your trailer becomes overloaded or disconnected during travel.

Product description

A totally proportional electric trailer brake control, the PrimusIQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Prodigy, the PrimusIQ now includes the Boost feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, amount of voltage delivery to the trailer brakes and diagnostic features incorporated in the LED display.

• Utilizes Plug-N-Play port for 2-plug adapters
• Self-diagnostics features will illuminate LED readout when issues occur
• Works proportionally in reverse
• Includes a Boost feature
• Snap-in dash mounting clip and hardware included

User questions & answers

Question:	will this fit a toyota sequoia
Answer:	Yes, I suppose you could use it as a cutting board, there is just the metal bar that holds the cookbook at the end of the board that might get in the way.
Question:	what harness do I need for 09 gmc
Answer:	In my experience it will hold a closed book of an inch depth
Question:	I have a 2009 GMC 3500. It has the factory brake controller which I am not satisfied with. Question what happens if I an after market controller
Answer:	I have no idea what you are talking about, sorry. I do like the stand. Less strain on my beck when reading.
Question:	Does this controller come with any wiring
Answer:	I didn’t buy a warranty. I think it’s reliable enough to last a long time. I only use mine for occasional reading and my grandson uses it to roll his cars on lol

Product description

Hopkins Manufacturing Corporation makes your towing experience simpler and more rewarding through innovation and value, offering a variety of towing solutions including vehicle wiring kits, adapters, vehicle and trailer connectors, breakaway systems, and much more. Today, more than 40 percentage of retail category sales are generated from Hopkins innovations. Today, more than 40 percentage of retail category sales are generated from Hopkins innovations. Reduce your brake control installation time to minutes with Hopkins' Plug-In Simple Brake Control Connector. Many of today's tow vehicles come with an OEM connector harness under the dash. This harness simply plugs into the tow vehicle and then plugs into the Hopkins brake control to complete the install. Designed for vehicles equipped with a factory tow package, this item comes equipped with a brake control plug. Connectors for quick install or removal of Hopkins' brake controls 47294, 47284, 47235, and 47225. No cutting, no splicing, no worries.

• Plug-In Simple Brake Control Connector comes equipped with a brake control plug
• OEM connector plugs directly into tow vehicle and ensures perfect fit
• 36-inch wire length for connection
• For vehicles with a factory tow package
• Includes step-by-step diagrammed instructions for quick and easy installation

User questions & answers

Question:	Will this work with a 07 Chevy Silverado
Answer:	Not sure it fit my 2015 Toyota tondura
Question:	Will this fit a 2020 Tacoma? I seen 1 review rhat says it does
Answer:	Dear Kevin, Thank you for your inquiry. The 47816 is the correct Brake Control Connector Harness for the 2020 Toyota Tacoma. If you have any other questions, please feel free to call our Tech Support Team at 1-800-835-0129 Monday-Friday, 8am-5pm Central Time. Thank you. Have a wonderful day!
Question:	will this fit in a 2003 Dodge Ram
Answer:	Not sure I have 2015 Toyota tondura
Question:	Will this fit 2017 4runner
Answer:	Dear James G., You will need a 47815 brake control connector for that year. If there are any other questions that we can answer, feel free to call our Tech Support Line at 800-835-0129. We are here Monday-Friday 8:00am-5:00pm CST. Thank you.

Product description

5 storable setting options with preferences of multiple drivers, and for pulling different trailers up to 4 axles. A flashing red warning system alerts user to No Trailer Brake situations.

• A distinct, easy-to-read LCD display with multiple screen color options, displays in English, French or Spanish
• Diagnostics show output current, battery, brake, and output voltage and warning system alerts to No Trailer Brake situations
• Boost feature allows for different levels of customized braking, select Electric over Hydraulic or Electric trailer brake mode
• Integrated Plug-N-Play port for 2-plug adapters and Snap-in mounting clip allows user to remove and store the control when not in use
• Compact, dash-hugging design. Electric trailer brake control for up to 4 braking axles.

User questions & answers

Question:	Does this fit a 2013 ram 3500 slt
Answer:	The CURT applies trailer brakes in accordance with vehicle deceleration. Built in accelerometers sense deceleration and apply trailer brakes according to the amount of deceleration. Small speed changes, letting off the gas etc, may not be enough to actuate trailer brakes. I have used cruise control, normal, with no interference or tugging from trailer brakes as speed is increased and decreased by the cruise control. This is based on my use experience only.
Question:	According to the wiring diagrams the controller is powered directly from the battery. Is the unit then powered all the time
Answer:	You would need to run a 12 volt 30-40 amp fused auxillary feed and a 30-40 amp ground line to the 7pin.
Question:	do the brakes engage when backing up
Answer:	Yes. Since Echo is not hardwired to a singular vehicle, it can be used in that environment. Note: the current product warranty does not cover commercial use, so keep that in mind.
Question:	does this come with any plut/pigtail for wiring into vehicle system
Answer:	No, my tacoma’s 7-pin is rotated 90° clockwise and it works fine.

Product description

The Reese Towpower BRAKE-EVN brake controller offers advanced proportional braking by applying brake pressure to match the vehicles deceleration rate. Proportional braking gets you get smoother stops that traditional time based controls. The boost feature gives the ability to apply more initial braking at the onset of stopping when towing heavier loads. When adjusted properly for your load, proportional brake controls can even extend the life of your vehicles brakes. The large LED display is easy to see when adjusting the control to handle the weight of your loaded or unloaded trailer. The BRAKE-EVN brake control can handle up to brake 4 axles and offers a simple plug in installation option, so be sure to get the proper factory harness for your vehicle. The perfect choice for light or heavy trailer loads.

• 1-4 Axle capacity
• Boost feature gives ability to apply more initial trailer braking
• Reverse battery protection
• No leveling required
• Diagnostics features incorporated in easy to read LED display

User questions & answers

Question:	Do I need to buy the pigtail for it to fit my 06dodge ram
Answer:	Just type in your 2002 Suburban and Amazon will put the one you need right there. That is what I did and it was perfect plugged right in. Easy as that
Question:	Is there an off and on switch or does LED indicator stay on all the time
Answer:	After 2006, Chevrolet stopped putting a terminal connector on the wire harness for the brake controller. Curt makes a “universal” harness connector that you can use to connect the controller to the truck harness. It is really very easy. Check YouTube for a video. I’m sure someone has done a video for your truck. Sorry, I don’t know the Curt part number for that universal harness but it is less than $10. I bet Amazon will List this harness as an add on if you go to the purchase page for the controller. Be sure to specify your truck info.
Question:	What is the dimensions of this unit (height, width, length front to back
Answer:	Yes, it has a knob on top and a sensitivity bottom on side. The unit will also automatically sense if you need more trailer braking on emergency stops. If you have it set on 3.0 and you are only using 2.2 , it will automatically go to 3.0 if needed. It is a nice unit. Pulling 20 ft. Enclosed with Chevy Duramax.
Question:	Why does Amazon say it won't fit my 2018 Jeep Wrangler JK, aren't they all fairly universal? Or is it just because I don't have a factory harness
Answer:	Proportional..the internal 'tri axis' sensor varies the intensity of electrical brake output dependent on vehicle motion.

Product description

Stay safe on the road while hitching and towing. Protect your vehicle and other drivers with Tekonsha Prodigy Universal P2 Electronic Brake Control System. Introduce your 1 to 4 axle trailer system to this intelligent controller that interprets the signal sent from your vehicle's brakes to your trailer. With a smooth and simple installation, you can easily mount this brake controller in virtually any position. This intelligent brake control system supplies power to your tow vehicle's brakes proportionally. That way, your trailer brakes at the same time and with the same strength as your vehicle, even in reverse gear. Thanks to this innovative technology, your vehicle's brakes aren't overworked or destroyed from constant wear and tear. Don't worry about slamming on the brake in your truck. With the Tekonsha Prodigy Electronic Trailer Brake Control, your trailer brakes will activate with that same extreme intensity.

• UNIVERSAL SYSTEM: Universal electronic brake control system designed to make trailer towing safer and easier
• FITS 1 TO 4 AXLES: Fits 1 to 4 axle trailers to deliver a signal from your vehicle's brakes to your trailer
• BATTERY PROTECTION: Features reverse battery protection for both vehicle and breakaway
• MOUNTING VERSATILITY: Numerous mounting options offer versatile installation
• INCLUDES 1 BRAKE SYSTEM: Includes 1 electronic brake control system for 1 to 4 axle trailers

User questions & answers

Question:	How long is the warranty
Answer:	No this is not plug and play on a 1995 GM full sized truck. If the truck is equipped with a factory tow haul package then it should have trailer brake wiring taped back on the harness coming from the fuse block on the drivers fender and there’s also wiring taped back at the rear driver side of the frame. If it’s not there then you will have to wire the entire length of the truck.
Question:	What does this unit come with
Answer:	I think so it worked great on 2016 Silverado with the Tekonsha adapter. Plugged right in.
Question:	Does this connect to 2021 dodger Ram or do I need to purchase a wiring adapter? Thanks
Answer:	your truck should come with a built in break controller. mine did, it would be located above the buttons to turn off your rear view camera
Question:	I have a 94 Dodge Ram 2500 Cummins will it work with it
Answer:	My package was damaged on arrival and no mounting bracket but the paperwork included states that there should have been.

Product description

The REESE Towpower Brakeman IV is a smart electric brake controller that mounts in any direction with no leveling required. Its small, compact design and pre-wired plug-and-play feature allow for quick and easy connection to 2-, 4-, 6- and 8- brake systems. This 100% solid-state electronic includes two separate easy push-button adjustment controls (output and sync) that allow for not only different trailer weights (output) but also the speed of activation (sync) depending on your driving style. For easy-reading, the bright and prominent digital display clearly indicates the output setting, sync setting, brake overload or short connection. Smoother braking starts with a sensing device that determines the voltage power being delivered to the towing vehicle’s brakes and assists in accurately adjusting the trailer brakes for city or highway driving. Safety is key, which is why this controller includes advanced internal circuit protection to help prevent damage and is meant for use on 12-volt negative ground systems only. This essential accessory is backed by a limited lifetime warranty.

• INSTALLS QUICKLY: This 100% solid-state electronic with a small compact design mounts in any direction, no leveling required. Pre-wired plug-and-play feature allows for quick and easy connection to 2-, 4-, 6- and 8- brake systems.
• ADJUSTS EASILY: Two separate easy push-button adjustment controls (output and sync) allow for not only different trailer weights (output) but also the speed of activation (sync) depending on your driving style.
• DIGITAL DISPLAY: Bright and prominent digital display clearly indicates the output setting, sync setting, brake overload or short connection.
• SAFE & SECURE: This device includes advanced internal circuit protection to help prevent damage and is for use on 12-volt negative ground systems only. Includes a limited lifetime warranty.

User questions & answers

Question:	Will this plug and play on a 1995 gmc sierra
Answer:	Yes, they are a separate purchase, vehicle dependent, for my silverado it was $15
Question:	will this work on 2018 Silverado
Answer:	The LED lights stay on all the time.
Question:	Will it work on a 2018 dodge 3500 heavy duty
Answer:	Height is about 1 inch. Width is 2.75 inches. Length is 4.0 inches. The wire pig tail sticks out the back. With the bracket, the height is 1.5 inches and 3.0 inches wide and the length is unchanged.
Question:	does it come with a mounting bracket
Answer:	It should. They are only two kinds. You do need an additional harness to connect the unit to your factory wiring. Amazon did the same thing with my Tacoma, even though it was the ONLY controller that fit. I love it and it's very compact. It should be a good fit for your Jeep.