13 best compact hatch

Product description

The Heavy Hitch Front Receiver Hitch for John Deere sub-compact Tractors allows you to use a standard hitch or chain at the front of your tractor. Perfect for pulling and towing purposes when you need access to the front of the tractor. Receiver extends 5 1/2″ from the base of the mount. Be sure to check for fitment issues when using a front end loader. Comes standard with a super durable Green environmentally friendly powdercoat. All Heavy Hitch products are made in the USA by a Minnesota company you can trust. Be confident in the quality and longevity of our products – we use only American made steel and certified welders.

• Compatible with John Deere 1, 2 and 3 series tractors such as the 1023E, 1025R, 1026R, 2025R, 2032R, 2038R, 3025E, 3032E, 3033R, 3038R, 3039R and 3046R sub-compact tractors.
• Direct bolt-on using existing holes in front frame.
• Includes 3/8″ welded on chain hook.

User questions & answers

Question:	What size is the backing plate and what is the hole spacing? Thanks
Answer:	Hi, I boot these boots for my daughter who hikes alot and she loves them. She told me they are really good for your feet. Hope this helps and again, she loves the boots and if she did not, she would tell me. Trust me.

Product description

The Heavy Hitch Rear Receiver Hitch Plate for John Deere sub-compact Tractors adds hitch capabilities to the rear of your tractor without welding. Just bolt on using your tractor’s existing holes. Perfect for pulling and towing purposes when you need access to the rear of the tractor. Also allows you to add a variety of implements to the rear. Plus it won’t interfere with the PTO. Comes standard with a super durable environmentally friendly powdercoat in your choice of Green or Black.

• Compatible with John Deere 1023E, 1025R, 1026R and the new 2018 2025R sub compact tractors.
• Direct bolt-on replacement of the existing hitch plate.
• Includes 2 tie-down holes for securing tractor when trailering.
• Does not interfere with PTO shaft or John Deere backhoe.
• Will work in conjunction with Heavy Hitch.

User questions & answers

Question:	Is this for a 2 inch receiver
Answer:	It is a 2" receiver that would attached to the back of a sub-compact tractor. You will want to confirm your tractor with the compatible models.

Product description

The Heavy Hitch Front Receiver Hitch for John Deere sub-compact Tractors allows you to use a standard hitch or chain at the front of your tractor. Perfect for pulling and towing purposes when you need access to the front of the tractor. Receiver extends 5 1/2″ from the base of the mount. Be sure to check for fitment issues when using a front end loader. Comes standard with a super durable environmentally friendly powdercoat in your choice of Green or Black.

• Compatible with John Deere 1, 2 and 3 series tractors such as the 1023E, 1025R, 1026R, 2025R, 2032R, 2038R, 3025E, 3032E, 3033R, 3038R, 3039R and 3046R sub-compact tractors.
• Direct bolt-on using existing holes in front frame.
• Includes 3/8″ welded on chain hook

Product description

Brand New Category 1 Aftermarket Replacement 3 Point Hitch Kit Fits Kubota B-Series Tractors KIT CONTAINS: 2 Lift Arms 1 Adjustable Leveling Arm 1 Stabilizer Bar 2 Stabilizer Chain Assemblies 1 Adjustable Top Link 2 Leveling Arm Brackets This Kit Retails Elsewhere For 349.00 *Note This Does Not Fit BX Series Tractors *Will Not Fit B3300SU, B3200, B7100, B7800, B8200, B6200HST, B2620 And B2650 We Will Not Pay Return Shipping If This Kit Does Not Fit Your Tractor So Please Be Sure To Match Everything Up In The Pictures And With The Picture Of All Parts That Include The Measurements

User questions & answers

Question:	will this fit a b
Answer:	I believe you can. The top hole is threaded and the 2" ball that came with it screws right in there.
Question:	Will this fit a kubota b6000e tractor
Answer:	The pins will fit a cat 1 hitch. The problem is that the upper too link was to narrow and I have to cut off part of the too swivel to get it to fit and the receiver. Was so tigjt that I had to grind off paint and use oil and s hammer to get the two in hitch to go in. If not for the fact I needed it the day I got it I would have returned it.
Question:	I have a bx23s will this work
Answer:	You should be able to do this, just be sure to run a chain from the bottom of each fork around backside of bucket and over the top back to forks. Tighten snug with binders to keep bucket lip from bending or ripping out. I have teeth on my bucket as well.
Question:	Will this fit a 1995 Kubota B2150 tractor
Answer:	180 to 200 lbs. the cardboard box they came in didn't weigh much.

Product description

All Maxxtow cargo carriers are engineered to safely transport your excess cargo in the safest possible manner. Made of either heavy duty steel with a durable powder coat finish or rust resistant aluminum, each cargo carrier is designed for years of worry free service. Easy assembly.

• Capacity: 500 pounds distributed weight
• Outer basket size: 53 x 19 x 5 inch
• Inner basket size: 51-1/2 x 17-1/2 x 4 inch
• Heavy duty steel
• Durable black powder coat finish
• PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION

User questions & answers

Question:	This only fits class 3 or 4 hitches? Mine is a standard 2"x2" hitch rated up to 3500lbs, but it says it's a class 2 hitch. So this would not fit mine
Answer:	In my opinion yes this will be good for transporting a deer. As long as it not over 500 lbs
Question:	Will this rack work with a Toyota Sequoia? The exhaust seems to be very close to the basket
Answer:	2" square. Class 3. To 4. Hitch
Question:	Would this work for transporting a deer
Answer:	My crossbars are adjustable and can be moved to accommodate mounting hardware for a roof on basket.
Question:	What is the hitch size
Answer:	I am not experienced in toting a kayak. I have seen others carry a kayak on the roof of their vehicles. It just doesn't seem to me that this roof basket is designed to carry a kayak.

Product features

MaxxHaul 70107 - Hitch Mount Steel Cargo Carrier

Heavy duty all steel construction.

Includes reflectors for added safety.

500 lbs. maximum distributed weight load capacity.

Instant Cargo Space

Provides instant cargo space for loads you would rather have outside your vehicle during transport.

Versatile

A convenient way to transport your excess load whether you are going camping, hauling firewood or handling your luggage.

Durable

All steel tubular construction with high side rails to help secure even taller loads.

Universal Fit

Fits standard Class III & IV 2" x 2" receiver hitches.

Product description

One New Aftermarket Replacement Category 1 A-Frame Handy Hitch For Easy Use Of Moving Trailers Without Getting Off Of Your Machine. Fits Kubota, Fits John Deere, and More. Fits Makes and Models. Comes With 1-7/8" Ball, 2" Ball & Clevis, Made Of Fully Welded Steel and Has Easy Hook-Up For Moving Of Trailers and Other Attachments. Replaces Part Number: Him30-0054

All OEM part numbers and logos are to be used for identification purposes only

• Comes With 1-7/8" Ball, 2" Ball & Clevis
• 25-1/2" Width between where it Fastens to the 3 Point Arms.
• Replaces Part Number: Him30-0054
• ACTUAL PHOTOS.
• Please Note That Some Listings Use Stock Images As A Reference For Customers.

Product description

The MaxxHaul 70422 Aluminum Hitch Receiver Mounted Cargo Carrier measures at a total measurement of 49-1/4" x 22-1/4" x 3-1/4” with the inside basket measuring at 48-1/4” x 21-1/4” x 2”. Its maximum distributed load carrying capacity is 500lbs. This allows one to easily transport numerous types of bulky items that would otherwise take up valuable space within the vehicle or the trunk of the vehicle. The sturdy 22.4lbs lightweight construction of the extruded aluminum basket provides increased durability with the open-floor platform design making it easy to maintain and cleaning a breeze. The under support and hitch shaft is constructed from high-grade steel with a powder coat finish. Rust and corrosion resistant, outside elements pose no match for its longevity of use. The 2” (inside measurement) rails were integrated into the construction to help keep the loaded cargo in place and provide unlimited tie-down location points. This cargo carrier fits all 2” x 2” Class III and IV hitch receivers. Built in reflectors add visibility for increased visual safety during use on and off the road.

• This basket style cargo carrier is constructed from extruded aluminum that is durable, compact and lightweight making it easy to install. Will not rust and easy to clean and maintain.
• Inner basket size: 48-1/4” x 21-1/4” x 2” ; Outer basket size: 49-1/4" x 22-1/4" x 3-1/4”
• Features a heavy duty steel under support frame with a 2" x 2" hitch shaft to fit Class III and IV hitch receivers.
• Raised side rails help keep cargo in place and provide tie-down options. Built-in reflectors with red colored corners to provide extra visibility and added safety
• Whether you are camping, going to a long road trip or simply transporting a load that you don't want inside your car, this basket-style rack will provide the instant cargo space you need.
• 500 Lbs. maximum distributed weight capacity
• PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION

User questions & answers

Question:	I have noticed all of the customer pics are not the same as what is shown. furthermore, maxxhaul doesn't even list this on their site anymore. ideas
Answer:	2" but you can buy an adapter separately for 1 1/4"
Question:	any concerns regarding the rust between two types of metal, aluminum basket and steel support
Answer:	I have mine mounted to the back of a teardrop trailer, so I had a similar concern. I purchased this -- Connor Hitch Extender - High Clearance 2" Dual Hitch Extension (GTW- 4000 lb.) , 1625370 Trailer Hitch Extension. I did modify the cargo carrier so it rode closer to the vehicle by shortening the main tube where it inserted into the extender, and relocated the hole for the pin. I would also anti rattle pins, and clamps as it assures it rides quiet and completely level. Equipped like this it did a great job, on a Maine trip with lots of rough road, off road sections.
Question:	Does this fit a 1 1/4" or a 2" hitch receiver? Looked for info, but could not find
Answer:	The hole on the rack for the hitch pin is 1/2". This is designed to work with the No Wobble Bolt that is included with the rack. This bolt works to securely tighten the rack when installed on the vehicle and keeps the rack from moving during use.
Question:	Problems bottoming out given the square tube goes straight back rather than angle up like many others
Answer:	The brackets that the straps are attached to rotate around the rack arms, making it fairly easy once you figure out the best position. I actually had 3 women's bikes on the rack with no problems. The straps were on the diagonal bar and the vertical bar below the seat and it was very tight, no movement at all. No issues with women's bikes at all here.

Product features

MaxxHaul 70422 Hitch Mount Compact Aluminum Cargo Carrier - 48" x 21"

Our MaxxHaul 70422 Aluminum Hitch Receiver Mounted Cargo Carrier allows one to easily transport numerous types of bulky items that would otherwise take up valuable space within the vehicle. The sturdy lightweight construction of the extruded aluminum basket provides increased durability with the open-floor platform design making it easy to maintain, and cleaning a breeze. The under-support and hitch shaft is constructed from high-grade steel with a powder coat finish.

Stability

Always use straps or tie-downs to ensure cargo is properly secured.

Security

Built-in reflectors add visibility for increased safety.

Compatibility

Fits all 2" x 2" Class III and IV hitch receivers. Easy to assemble, easy to install.

Product description

When you’re trying to get a job done around your lawn or garden, on a farm field, or at an industrial site, having the proper equipment saves you both time and energy. This 3-Point 2-inch Receiver Trailer Hitch Category 1 Tractor Tow Hitch Drawbar Adapter is designed to be compatible with many standard 2-inch trailer hitches.



Features:

- Category 1 lift pins (7/8" diameter)

- Standard 2" trailer receiver

- Heavy duty steel construction

- Bottom pins included

- Strong powder coated finish



Specifications:

- Width: 26" (from end of pin)

- Hight: 19" (bottom pin to top pin)

Note: will not fit John Deere IMatch.

• HEAVY DUTY CONSTRUCTION - The hitch adapter is crafted of stainless steel, enhanced strenth and durability; Fully finished with black powder coating to resist rust and corrode, which affords to be left outside in the elements for long periods of time
• PREMIUM DETAILS - Overall Width 28" (from end of pin) and height 19" (bottom pin to top pin); Triangle design is for long-lasting using and relatively light weight, which is easy to hook up and lock to the tractor or trailer, saving your time and energy
• EXCELLENT PERFORMANCE - The tractor tow bar implement helps change device at the rear of the tractor for easy and quick assembly and disassembly and move trailers around on the property, widely used in heavy duty work of industrial and construction business
• COMPLETE KITS - Equipped with lifting pins that are 7/8 inches in diameter to fit all Category 1 tractors Standard 2" trailer receiver; Unique bottom pin makes it easy to use with smaller model tractors as well as larger tractors
• WIDE COMPATIBILITIES - The hitch drawbar adapter acts as a stabilizer, perfect for moving around Compact Sub-Compact Tractors BX Kubota, John Deere, LM25H WLM Tractor, NorTrac, Kioti, Yanmar, Cat and other cargo carriers

User questions & answers

Question:	Does this work on John Deere 1023e ? And how many pounds
Answer:	I got them at Tractor Suppy
Question:	Will this hitch work with a quick hitch
Answer:	Yes
Question:	Will this fit a gc1725m massey ferguson sub compact tractor
Answer:	It is fitted with receivers for bale spears. The spears will have to be purchased elsewear.
Question:	Quick hitch compatible
Answer:	You need to consider several factors: 1.) What is the "tongue" weight of the trailer compared to the weight rating at your 3-point? The weight of the hitch and the downward force the trailer is placing at the hitch should not exceed your 3-point's rating. Commonly, gooseneck trailers divide 20% (25% max) weight to the hitch (because it is over the towed vehicle's axle) with the rest of the weight on the trailer's wheels ("bumper pull" trailers should be 10% to 15% max). Something to keep in mind when you load stuff into a trailer. 2.) What is the actual total weight of the trailer compared to how much the tractor is rated to pull (which is different than how much it can lift at the 3-point)? Also, pulling the trailer through mud or on soft ground can increase the horizontal pull force to the tractor. 3.) Depending on the downward force placed at the hitch attached to the 3-point, you may need some counter-balance at the front of the tractor to keep enough weight on the front wheels, especially to ensure you can control and steer the entire rig, worse yet if you are traveling over anything besides smooth level hard ground. As for the capacity ratings for a tractor, of you cannot find them in the manual or on the manufacturer's site, you can always try websites like TractorData. And it is always good to know your trailer's typical loaded and empty weights at the axles and the hitch (if you exceed your tow vehicle's and tires' ratings, you are risking an accident and big liability, or a big fine from a veteran highway patrol). You can find this out by taking your trailer to a scale (at the co-op or almost any truck stop on the interstate -most advertise on their signs). Many scales have several adjacent weight pads to weigh each group of axles separately. Get your trailer's axle weight with tow vehicle attached, while simultaneously getting the tow vehicle's rear axle weight (on the other weigh pad, or pulling through if only have one weigh pad -the key is not having more than one group of axles on the same pad at the same time). Pull the trailer off, detach, and then get the tow vehicle's rear axle weight without the trailer attached. Subtract the tow vehicle's axle weight with and without the trailer attached and that should be close to the trailer's "tongue" weight (assuming the hitch is directly above the rear axle).

Product description

The Heavy Hitch Bucket Tooth Bar is the heavy duty tool you need to increase your bucket capacity and improve digging performance. The clamp-on tooth bar is universally compatible and installs simply with 5/8″ set screws in each tooth shank. All you need is a 5/16′ Allen wrench to install.

Compatible with several front end loader, skid steer and tractor models including (but not limited to):

49”, 53” and 61” buckets on John Deere models 45, 120R, H120, D120, H130, D160, H160, H165, 200CX and 300CX front end loader buckets.

57” bucket on John Deere 220R model loaders with standard or heavy duty material bucket.

46” on Kubota LA243 series loaders with 46.5” standard material bucket.

Be confident in the quality and longevity of our products – we use only American made steel and qualified welders.

HEAVY HITCH BUCKET TOOTH BAR DETAILS:

Universally compatible with all regular buckets (cutting bar size 1/2" or less).

★ Features heavy duty Pengo 230 shanks (with ⅝ inch cup-point set screw); 6 shanks on the 46″ and 49″; 7 shanks on the 53″, 57″, and 61″.

★ Teeth are replaceable and interchangeable.

★ Installation is easy – no drilling required. Simply slide on and tighten set screws to 35-40 foot pounds using a 5/16″ Allen wrench.

★ Works with standard material buckets with up to a 1/2″ cutter bar.

Smooth design prevents mud and debris from hanging on.

How To Measure For A Toothbar:

① Measure the inside width of your bucket. This will determine what width you will need.

② Measure the height of your cutting edge. This standard tooth bar will fit on a cutting edge of up to 1/2″. If your cutting bar is 5/8″-3/4″, you will need our Heavy Duty Tooth Bar.

• [EQUIPMENT YOU CAN COUNT ON] Heavy Duty Pengo 230 shanks, 6 shanks on the 46″ and 49″ Bar | 7 shanks on the 53″, 57″ and 61″ Bar | 8 shanks on the 73″ bar
• [BUILT TO LAST] Teeth are replaceable and interchangeable meaning that wear and tear doesn't mean buying a whole new tooth bar, just replace the damaged one!
• [THIS IS A STANDARD BUCKET SIZE TOOTH BAR] This tooth bar will fit on a cutting edge of 1/2″ or less. Measure the height of your cutting edge and if your cutting bar is thicker than 1/2″, you will need our Heavy Duty tooth bar. Make sure to measure the inside width of your bucket. This will determine what width you will need.
• [USA MADE] Our product is manufactured in Minnesota so you know it can withstand the harshest conditions!
• [GUARANTEED FIT] Our standard bucket bar is designed to work with standard material buckets that have up to a 1/2″ cutter bar and our heavy duty bucket bar works with cutter bars of more than 1/2". Check out the full product description for some applications or let us know if you have questions!

User questions & answers

Question:	Where can i get the replacement teeth? if you have them i would like the link so i can purchase the bar and some replacements. thanks
Answer:	Yes, these will fit the couplers on JD 855.
Question:	I have a jd 1025r with a 53” bucket (inside measuring). will the 53” bar work on this
Answer:	I don't know. My JD 1025r compact tractor has standard hydraulic fittings I believe. I will tell you this product should be used by John Deere instead of the cheap, thin rubber dust caps that were on my tractor.
Question:	My Kabota L3410 front end loader bucket lip is bent by 0.75 inches. Can your tooth bar attach to my bucket
Answer:	That I don’t know
Question:	do you have a 471/2 inside measurment tooth bar
Answer:	Hello surfboss. This set is made from PP and ABS. It is BPA and Phthalate free. Thank you.

• LENOX CAR BIKE RACK: Answering the call to adventure shouldn’t be the most difficult part of your cycling journey. Which is why we have designed our Lenox Car Rack 2–Bike Hitch to provide the convenience you need when looking to take on your next two-wheeled conquest.
• CLASS II OR IV 2” HITCH: The Lenox Car Hitch Mount Bike Rack is made to fit 2-inch trailer hitch. Vehicle must have a Class II or IV hitch to use this product.
• SAFE & DURABLE DESIGN: Carry arm spacing is designed to accommodate an array of frame styles. Our tie-down cradles and straps take great care in individually securing your bicycles while protecting them from damage.
• WEIGHT LIMIT: Sturdy steel construction with reliable weight limits. 2-bike - 80lbs, 3-bike - 110lbs, 4-bike - 140lbs, 5-bike - 170lbs. Minor assembly required.
• ADAPTER INCLUDED: Lenox comes with an adapter to minimize wobble of bikes during transport. After your bike riding adventure, Lenox easily down for simple storage when not in use.

User questions & answers

Question:	Where was it made
Answer:	The plate is 9.5"x5". Center to center hole spacing is 6.466" and 1.806" apart.
Question:	One of the straps on my rack got torn. What do I need to buy to replace it
Answer:	Thank you for your question! While the women's Surrey II boot has a slip-resistant rubber outsole, we would not recommend this boot for snow shoeing.
Question:	Is there a hitch lock that works with this bike rack? I do not want to drill out the holes to enlarge them
Answer:	Different lace colors for different boots.
Question:	How long is the stem that holds the bikes (i.e. the one where the straps are) on a 4 bike rack carrier
Answer:	Thank you for your question! The Surrey II boot does not have cleats: the heel is wooden with a slip resistant rubber tread.

Product features

Retrospec Lenox Car Hitch Mount Bike Rack

Lenox Hitch Mount Bike Rack from Retrospec is ready for all your cycling destinations. Lenox is easy to assemble and features individual tie-down straps and cradles to secure your bikes during transportation. Note: Step-thru frames require a bike frame adapter to ensure a secure fit.

• COMPACT FOLDING - The unique compact folding design enables the rack to be folded up flush with the vehicle to save space when not in use.
• TOP NOTCH QUALITY - Manufactured with heavy duty steel and finished with a durable powder coat ensuring lasting performance
• COMPATIBILITY - This rack holds up to 2-bikes with a total weight capacity of 60 lbs (30 lbs each) Maximum tire width of 3-inch. Hitch is compatible with 1.25" and 2" hitch receivers (hitch adapter included)
• BIKE PROTECTION - The soft padding on the rack provides protection to the bikes paint preventing chipping and wear and tear
• LIMITED LIFETIME WARRANTY - At KAC, we stand by the quality and design of our Bike Rack products. Our Limited Lifetime Warranty covers a wide variety of mishaps and performance guarantees

User questions & answers

Question:	Does this have a threaded hitch pin to prevent wobble when mounted
Answer:	it is a threaded hitch pin, with washer and cotter spring clip. we use the smaller hitch for Honda CR-V tow weight class, a larger cap. will need the included "shim" block, which may introduce some play. wobble does not seem excessive, but using a top strap may ease concern (not included). heavy but sturdy carrier!
Question:	Is there an attachment so I could carry a recumbent 3 wheel and a two wheel bike
Answer:	They are made for 2 wheel only.
Question:	Will this fit bmw 2019 or bmw 1x
Answer:	It's for bicycles, not motorcycles
Question:	Will this hold "fat tire" bike
Answer:	The correct answer it will NOT hold a fat tire bike / 4 inch wheel. You will have to order the fat tire replacement tire racks

Product features

Compact Folding

Our unique compact folding design enables the rack to be folded while not in use decreasing the amount of space that this rack accounts for.

Bike Protection

The tray style platform rack is padded with soft protective foam preventing bikes from being scratched while on the rack.

Easy Adjustment

Our innovative design allows an easy adjustment to your bike with turn-knob adjusted arms with padded hooks.

What's Included

• All installation hardware
• Hitch Pin
• 1.25" Hitch adapter
  • enabling this to be compatible to both 1.25" and 2" hitch

• 【Built to last】 3 point 2 inch hitch adapter is made of black, powder-coated stainless steel.This means that it is not only strong and durable, but it won’t rust or corrode even when left outside in the elements for long periods of time.
• 【Adaptability】Hitch attachment acts as a stabilizer and works on a variety of 2-inch hitches. This hitch support is perfect for moving around Compact Sub-Compact Tractors BX Kubota, John Deere, LM25H, WLM Tractor, NorTrac, Kioti, Yanmar, Catand other cargo carriers.
• 【Easy to install and use】This 3-Point 2-inch Receiver Trailer Hitch Drawbar Adapter is equipped with category 1 lifting pins that are 7/8 inches in diameter. This adapter also has a unique bottom pin design that makes it easy to use with smaller model tractors as well as larger tractors.
• 【Convenient and timesaver】Lightweight,quick and easy to attach to any trailer behind a tractor, making it more convenient when you’re out working and saves your time and energy. It is widely used in heavy duty work of industrial and construction business.
• 【Reliable warranty】We offer 100% refund guarantee, if you think this product didn't fit your vechile, you can get your money back anytime.

User questions & answers

Question:	Will this adapter fit a john deere 1023e compact tractor? is a quick hitch adapter required
Answer:	Yes I used a standard hitch lock on my rake
Question:	Will this fit the land pride qh05 quick hitch
Answer:	Sorry... I cannot specifically answer this.. but I can tell you that this rack is not safe. We rode 7 hours with two bikes and this rack nearly fell apart... do not buy this.

Product features

Situation 1

• If you’re quick connect accepts cat 1 3 point then yes.

Situation 2

• Measure the distance between the top hook of your quick hitch and the horizontal line about 20"H, and the distance between the horizontal two hooks is about 21" to 27"W .

Situation 3

• Remove the quick attach parts, and it may fit.

Sulythw 3 Point 2" Receiver Trailer Hitch Fits all category 1 tractors

Product description

The Heavy Hitch 3 in 1 Trailer Tow Hitch is the perfect attachment for when you want to pull something with your sub-compact tractor or ATV. The multi-use design allows you to insert the trailer tow hitch into the 2” receiver on your sub-compact tractor or ATV. Then, with a simple pull of a pin, you can remove the hitch and rotate it to suit the needs for the task at hand. The hitch ball, clevis mount and tow hook are included. Please note this item is for off-road use only and available in Black. Choose your preferred hitch ball size when ordering. All Heavy Hitch products are made in the USA by a Minnesota company you can trust. Be confident in the quality and longevity of our products – we use only American made steel and certified welders.

• Attaches to any off road vehicle with a 2” receiver, including sub-compact tractors and ATVs.
• Fits 2’ square receivers.
• Rotates to three functions.
• Includes 3-way drawbar and 1 7/8″ or 2” trailer hitch ball.
• 4” extended version of the trailer tow hitch for Gators and other UTVs and ATVs with 2” receivers tucked under the rear. The extended version includes an additional set of holes to shorten the length as well for easier use.

User questions & answers

Question:	How long is it, that is, the distance from each adjustable hole to the center of the ball
Answer:	Dear customer, Hello, yes, our 3 point adapter is suitable for your John Deere 1023E. Please feel free to purchase, thank you so much!
Question:	What size is the hole in the extra plate from the ball
Answer:	Dear customer, Hello, this product is designed for 3 point hitch type, it probably fits your Land Pride QH05 if you remove the quick hitch parts. Hope this is helpful.
Question:	Does this hitch fit a John Deere Gator with a 2 inch squared reciever
Answer:	Made in China
Question:	Can the 2” ball be removed and replaced with a 1-7/8” ball for use with hitch type pull behind atv sprayers that require the smaller ball
Answer:	Bike shops have replacement “Bike carrier straps” they tend to be universal, also can order on Amazon eg. Kolpin Rubber straps