12 best nerf bars

• IMPORTANT – Only fit Crew Cab with 4 full-size doors. Not for Quad Cab or Mega Cab. (Please check the Cab Size picture)
• FITMENT – Compatible with 2019-2021 Dodge Ram 1500 Crew Cab | EXCLUSION – This won't fit 2019-2021 Ram 1500 Classic
• OVAL TUBE DESIGN - Distinctive oval tube design provides a wider 3.5" step pad surface than their single round tube counterparts. Bigger step pad's non-slip surface = Greater Stability. Seamless, end to end, full body E-coating heavy textured powder finish provides superior dirt, water and rust protection while enabling the clean yet rugged look to these nerf bars.
• EASY INSTALLATION - Easy bolt-on installation. Installation guide included.
• QUALITY GUARANTEED - TYGER no hassle 5 year warranty against manufacturing defects!

User questions & answers

Question:	Will these fit a 2021 Ram
Answer:	Yes
Question:	Any drilling required
Answer:	yes everything you need is included, very easy installation.
Question:	Will it fit my 2021 ram rebel crew cab
Answer:	Yes
Question:	it comes with all the hardware and brackets right??? thank you
Answer:	I have a bed tent as well and it works great

• IMPORTANT - Only fit Crew Cab with 4 full-size doors. Not for Quad Cab NOT for Mega Cab. (Please check the Cab Size picture.)
• FITMENT - Compatible with Crew Cab models for 2009-2018 Ram 1500, 2019-2021 Classic and 2010-2021 2500/3500 | EXCLUSION - This won't fit 5th Gen 2019-UP RAM 1500 New Body Style
• 100% brand new 2 bars for both driver & passenger sides. All mounting hardware and DIY instruction included.;
• Step bars are made of heavy duty stainless steel 3 inch round tubing while providing extra protection to your vehicle! UV resistant non-slip wide step pads.
• Easy Bolt-On installation. For 2009-2011 and some 2012 models, minor drilling required for 1/4'' holes through the pinch weld for support brackets. (DIY instruction included in the package).

User questions & answers

Question:	I've had some on the past that I could barely get my foot on. I need something that is easy to step up on. Do these work or just for for looks
Answer:	YES EVERYTHING IS INSIDE THE BOX TAKES 1 1/2 HOURS TO INSTALL
Question:	Will these fit on a 2012 ram 2500 crew cab diesel
Answer:	Cofactors body holes not frame
Question:	do all truck running boards come with all needed to install on truck
Answer:	Crew cab
Question:	Do these mount to the factory running board drilled holes on the body, or do they bolt to the body mounts on the frame
Answer:	No Drilling required.

• This running board side step fits for 2015-2021 Ford F-150 SuperCrew Cab Pickup 4-Door & 2017-2021 Ford F-250, F-350 Super Duty Crew Cab. (Please check the cab size picture if you are unsure of your exact model.)
• Easy bolt-on installation with no drilling required. All factory holes are perfectly aligned with the mounts; bolts to factory mount in less than an hour.
• Running boards structure provides strength and durability. The 6-inch non-slip injection step pad allows for easy movement such as stepping in, stepping out, and even jumping (450 lb. capacity).
• Made from top grade anti-corrosion aluminum and pre-treated with rust-resistant black powder coatings. One piece design ensures great performance and look for years to come.
• Package includes 2 running boards, 6 brackets, relevant hardware, and detailed installation instructions.

User questions & answers

Question:	Will these running boards dent very easily
Answer:	This is made of aluminum and rubber pads on top，very strength and durable
Question:	Will this item fit with a spiltter on my supersnake f
Answer:	Hello, these running boards are compatible with the 2017-2021 Ford F250 F350 F450 F550 Super Duty Crew Cab and the 2015-2021 Ford F150 SuperCrew Cab, thank you for your question.
Question:	What are these made
Answer:	I have a Ram 1500 crew cab these fit perfect install easy and give plenty of foot space to use as a step.My 5 ft tall wife was very happy once I installed the bars.
Question:	Will this fit a 2021 f250 crew cab
Answer:	I would think so. Same size cab, not sure on the size of your bed though.I have a 2013 Ram 1500 with the 5.6 bed on it.

Product features

Surface Layer

High grade anti-corrosion aluminum

Black powder-coating

Slip-resistant ABS plastic

Load Capacity

Formed structure of running board adds strength and durability

Each side can handle up to 450lb (200kg)

Production Process

The running boards go through a pre-treatment and an e-coat layer

Package Includes

2 x Side Steps | Nerf Bars | Running Boards (Driver & Passenger Side)

1 x Accessory Package Kit

1 x DIY Installation Manual

Functions

Improve the practicality of your vehicle with running boards. The boards make it easier and safer to enter and exit your vehicle. To a certain extent, the paint on the side of the vehicle can be protected from being scratched. At the same time, you can easily reach the top of your car when you need to perform such actions as accessing the luggage rack or cleaning the roof.

Product description

LUND 5” Oval Curved Nerf Bars combine style, strength and functionality. Available in stainless steel or black powder-coated steel finishes, these larger sized oval bars are a perfect fit for full-size trucks and SUV’s. The virtually corrosion free highly-polished appearance repels dirt and grime for easy maintenance and detailing. Pre-assembled for stress-free installation; includes all mounting hardware for a direct, no-drill installation. Brackets are matched to your vehicles exact make, model and year to provide a precise fit for your truck or SUV.

• 5" Oval step provides extra-wide stepping area for solid traction and stability; Curved end design tucks back under edge of vehicle
• Marine-grade polished 304 stainless steel finish is corrosion resistant
• Non-slip, flat step pads provide traction for safe footing.Step Pad Material:Plastic
• Solid construction supports up to 350 pounds
• Pre-assembled for easy no-drill installation with all mounting hardware included

User questions & answers

Question:	Where can I buy replacement pads for this item
Answer:	Yes
Question:	I have a Ram 3500 4door flare side diesel, will they fit
Answer:	Thank you for your question! Part 23785007 is compatible with the 2010-2019 Dodge Ram 3500 Crew Cab.
Question:	Do these fit the 2020 Ram 2500 Diesel Larmie
Answer:	Not that I can tell and don't think they will.
Question:	This fit on the 2019 ram
Answer:	Ahhhh, I am jealous. Every F150 owner's dream. A super snake. What do you mean by split? It will cover from the front door to the the end of the back door but not up to the bed/tire. You would need a separate piece for that. This is a great product. I love it so far. It is solid and fits well into the provided screw bolts already provided on the truck. I have a 2019 Lariat and this was a great choice. It has not scratched or even a blemish. You will be satisfied. Be weary of the height though. The Super Snake is a low rider and these will be close to the ground.

• FITS PERFECTLY - Fit for 2009-2014 F150 Regular Cab (Please contact us to confirm fitment before ordering.)
• SURFACE FINISH- Made by ultra strong and heavy duty powder coated mild steel round tube for rust-resistant with UV resistant non-slip wide step pads.
• OUTSTANDING DESIGN - TAC side steps give your car outstanding appearance and extra protection, make you convenient to get in or out of your car.
• EASY TO INSTALL - Easy bolt-on installation. No drilling or cutting required. All mounting hardware and Installation instruction included.
• NO-HASSLE WARRANTY - High quality standard. 3-Year warranty against manufacturing defects!

User questions & answers

Question:	Can i use in a f150 2010 regular cab
Answer:	Yes they do fit a 2013 F-150 regular (single) cab. I installed them myself on my 2013 F-150 single cab and it’s fairly easy straight forward installation.
Question:	Where is contact info to confirm fit
Answer:	Body mounted with the brackets. Could you please send us your email address? We can send you the installation instruction.
Question:	Hi fits in my 2013 f150 xl regular cab
Answer:	Max mate has same pads as these. Lund does not sell them, but if u have ur receipt, they will send u new running boards because they have a lifetime warranty. No Hassel, if u have ur receipt.
Question:	How do these mount to the vehicle? I cant find any install docs online
Answer:	I have no idea. Our son purchased them and installed them for us and I love them because of the width. You see I am 80 years old.

Product features

Stainless Steel Material

• Marine grade stainless steel
• Mirror polish finish
• 3” UV resistant non-slip step pad
• Custom made brackets
• Fit for American Truck and SUV

Mild Steel Material

• Engineering grade heavy duty steel
• Glosses black powder coating finish
• 3” UV resistant non-slip step pad
• Custom made brackets
• Fit for American Truck and SUV

TAC Quality Finish

Double layer finish

Rust resistant

CNC Bending Craft

Crease resistant

Without any dent

Non-Slip Step Pad

UV resistant

Texture surface

• FITS PERFECTLY - Compatible with 2009-2018 RAM 1500 Quad Cab | 2019-2021 RAM 1500 Classic Quad Cab (Please contact us to confirm fitment before ordering.)
• SURFACE FINISH- Made by ultra strong and heavy duty powder coated mild steel oval tube for rust-resistant with UV resistant non-slip wide step pads.
• OUTSTANDING DESIGN - TAC side steps give your car outstanding appearance and extra protection, make you convenient to get in or out of your car.
• EASY TO INSTALL - Easily bolt-on installation. 2009-2012 models will require drilling for driver side support brackets. All mounting hardware and Installation instruction included.
• NO-HASSLE WARRANTY - High quality standard. 3-Year warranty against manufacturing defects!

User questions & answers

Question:	Can theses be used if mud flaps are on
Answer:	Not sure but fit my 2016 RAM 1500 diesel
Question:	Dumb question but just making sure. Will they fit a 2018 dodge quad cab? Thanks
Answer:	It fit my 2019 Ram 1500 Classic Express
Question:	Will this fit 2019 dodge ram classic express warlock
Answer:	Yes, it will fit for 2010 F150 Rugular Cab.
Question:	Will these fit the 2019 ram 1500 classic lonestar 5.7l quad cab
Answer:	Go to amazon and search nerf bars for your specific vehicle and when TAC comes up click on them and amazon will ask for vehicle info again to confirm fit.

Product features

TAC Bending Bar Design

4” wide oval tube

Accurate CNC bending

TAC Straight Bar Design

4” wide oval tube

Cambered welding end cap

4” Step Pad Design

Straight stripe design for curving bar

Square plastic design for straight bar

Stainless Steel Material

• Marine grade stainless steel
• Mirror polish finish
• 4” UV resistant non-slip step pad
• Custom made brackets
• Fit for American Truck and SUV

Mild Steel Material

• Engineering grade heavy duty steel
• Glosses black powder coating finish
• 4” UV resistant non-slip step pad
• Custom made brackets
• Fit for American Truck and SUV

Product description

TYGER AUTO focus on developing premium aftermarket auto parts that meet or exceed OE quality standards. All TYGER auto parts are covered with No-Hassle and will make your vehicle stand out on the street ! Fitment 2007-2018 Silverado/Sierra 1500 Crew Cab; 2007-2019 Silverado/Sierra 2500 3500HD Crew Cab; Do not fit 2007 classic model

• IMPORTANT - Compatible with 2007-2018 Silverado/Sierra 1500 Crew Cab | Compatible with 2007-2019 Silverado/Sierra 2500 3500HD Crew Cab | Does not fit 2007 classic model
• Product weight – 51 lbs. | Easy bolt-on Installation required (Trimming needed on 2017-Up models with plastic DEF tank cover)
• TYGER No-Hassle 5 year warranty against manufacturing defects!
• 100% brand new Factory Style step bars for both driver & passenger sides. All mounting hardware and DIY instruction included
• Step bars are made of 4inch wide heavy duty triangle mild steel tubing in black Powder-Coating for rust-resistant with UV resistant non-slip wide step pads while providing extra protection to your vehicle

User questions & answers

Question:	Will this fit a 2014 dodge ram 1502 full size doors
Answer:	3 1/4 - 3 1/2 inches
Question:	What is the weight limit
Answer:	Bolts to frame, installs in about 45 minutes, lined up perfectly, and they are solid, 3 mounting points, fit like a glove. Love them!
Question:	How long is the gap between the bottom of the truck and the top of the step
Answer:	Yes, i have aftermarket mud flaps i installed at the same time and they fit just fine with some room between so i would assume it will fit with oem mud flaps too..
Question:	Just where exactly do they mount? some say body, some say frame. I have been told to use ones that bolt to the frame not the rocker
Answer:	Yes, it will fit. Please confirm you have a 2018 Dodge Ram 1500 Quad Cab, with 2 Full-size front doors and 2 Narrower rear doors.

Product features

Riser - Side Step Bars

Add some extra flare to your vehicle with these easy-to-install risers. These rocker panel mount side step bars not only provide a new look but are also helpful to step in and out of your vehicle. No drilling is necessary as these have a simple bolt-on installation process.

Riser - Side Step Bars

Add some extra flare to your vehicle with these easy-to-install risers. These rocker panel mount side step bars not only provide a new look but are also helpful to step in and out of your vehicle. No drilling is necessary as these have a simple bolt-on installation process.

Riser - Side Step Bars

Add some extra flare to your vehicle with these easy-to-install risers. These rocker panel mount side step bars not only provide a new look but are also helpful to step in and out of your vehicle. No drilling is necessary as these have a simple bolt-on installation process.

Riser - Side Step Bars

Add some extra flare to your vehicle with these easy-to-install risers. These rocker panel mount side step bars not only provide a new look but are also helpful to step in and out of your vehicle. No drilling is necessary as these have a simple bolt-on installation process.

4-Inch Wide Pads

Keep your passengers safe as they enter and exit your vehicle with these non-slip step pads. These bars are made of 4-inch wide heavy duty steel tubing and the pads themselves are UV resistant so no discoloration will occur over time. The triangulated tube is ideal for high strength durability, while accommodating the need for increased ground clearance.

Outlast the Competitors

Tyger Auto ensures that ever step of production is done with quality control in mind. That is why they have perfected these black bars for better rust resistance. This entails the following three-step process:

1. Pre-treatment to remove impurities.

2. Special 'E-Coat' inside & out.

3. Dual-Stage Gloss Black Powder.

Product description

Fitment

Compatible with Toyota Tundra 2007-2021 CrewMax Extended Crew Cab

Package Content

Tired of rusty steel rock sliders that suck up your wallet and gas mileage? The iArmor is your answer to a corrosion-proof, fuel efficient, and better looking set of side armor. With its 6.5" wide steps and dual girder system, the iArmor will protect your rocker panels from impact and obstacles. Sick of tubular nerf bars and rock sliders that are Smittybilt knockoffs? The iArmor is your answer to unique looking step bars. With its patented square tube design and slanted step plates, the iArmor will make your truck look badass and off-road ready. Serving both as rock sliders and side steps, the iArmor will provide a comfortable step up into your ride. Choose iArmor running board as your next truck mod upgrade - you won't regret it!

Introduction

Tired of rusty steel rock sliders that suck up your wallet and gas mileage? The iArmor is your answer to a corrosion-proof, fuel efficient, and better looking set of side armor. With its 6.5" wide steps and dual girder system, the iArmor will protect your rocker panels from impact and obstacles. Sick of tubular nerf bars and rock sliders that are Smittybilt knockoffs? The iArmor is your answer to unique looking step bars. With its patented square tube design and slanted step plates, the iArmor will make your truck look badass and off-road ready. Serving both as rock sliders and side steps, the iArmor will provide a comfortable step up into your ride. Choose iArmor running board as your next truck mod upgrade - you won't regret it!

• Protect your rocker panels with iArmor's 6.5" wide running boards. Dual girder system provides extra protection against obstacles and impact.
• Make your truck standout with the iArmor's unique square tube design and slotted step pads. Powder coated black for an aggressive off-road look.
• Serves as both rock sliders and running boards - the iArmor's extra wide surface provides a sturdy step up into your truck.
• Aluminum 1 piece construction ensures these side steps support up to 300 lbs. Grille openings on the step plates allow ice, dirt and water to pass through - keeping the running board safe and clean.
• Easy to install (hardware included), and Compatible with Toyota Tundra 2007-2021 CrewMax

User questions & answers

Question:	Do these fit a 2020 Toyota Tundra Crewmax
Answer:	There is a kit provided with the slide bars that includes brackets and mounting bolts, washers, etc. One set of brackets mount to predrilled holes in the truck body. Another set of brackets hold the bar in place and attach to the first set of brackets attached to the truck. The brackets are semi visible when installation is complete
Question:	There are many compatible parts to the 2008-current sequoia. Would these be compatible to the 2010 sequoia? Please confirm
Answer:	Frankly I dont know. I have a 2019 Toyota Tundra Crew Max that they fit perfectly. Contact Toyota to see if the mounting bolt spacing is the same for the 2020 as the 2019
Question:	What is the mounting method for this slide bar? I don't see any brackets attacehd to it in the product picture
Answer:	No, it will not. You will need TG-RS2D40078 for a 14 Ram 1500 Crew Cab.
Question:	Do these fit a 2020 Toyota Tundra Crewmax
Answer:	I never found a weight limit but step dad is 360lbs and when he steps on them they dont move so at least that much....

Product description

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4" oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

• Bold saddle pad mounted design
• Series unique PRO TRAXX design
• Full 4" textured step area ideal for mud scraping
• Deep paved waterways keep step areas dry
• 30 degree OE style bends

User questions & answers

Question:	Is this a set, for both sides of truck? Does it include mounting hardware
Answer:	Hello, This part only fits on 2007-2019 Toyota Tundra CrewMax Cab. Thank you!

Product description

The Westin Signature Series step bars accent the lines of your truck while giving better access to vehicle. The step pad is UV resistant so that it won't fade or crack under the harshest of conditions. The steps are guaranteed not to yellow or tarnish over time and feature an easy bolt-on installation.

• Slip-resistant recessed step area for easy entry and exit from vehicle
• No-drilling required for easy installation
• Made of 16 gauge 304 stainless steel tubing
• 3-year warranty
• Recessed step area prevents interior corrosion

User questions & answers

Question:	Will fit 1997 F-350 4 door
Answer:	They bolt on to the frame.
Question:	could you make these fit on my 2002 crewcab lariat as I will not use rocker mounts , thanks - Ryan
Answer:	Hello,Thank you for your interest. This is a set and does come with the mounting hardware. Please ensure you visit the vehicle fit guide located at the top left-hand corner of the webpage to ensure you get the proper fit for your vehicle.Sincerely,Xact Auto
Question:	Does this bolt to the frame or to the cab
Answer:	Hello, Yes, this is for 2007-2020 Toyota Tundra CrewMax Cab.

• Package Includes 2 running boards, heavy duty brackets & hardware for an easy, DIY install
• 6" wide and fully covered in anti-slip tread, these premium side steps are designed for your comfort and safety
• The running board's metal backsplash and tapered ends create a factory look - adding class and style to any vehicle
• Made of aircraft grade T6061 aluminum, these steps offer better corrosion protection than other black nerf bars
• Cab length Rocker Panel Mount and Compatible with Ford F250 F350 Super Duty 1999-2016 Crew Cab

Product description

TYGER AUTO focus on developing premium aftermarket auto parts that meet or exceed OE quality standards. All TYGER auto parts are covered with No-Hassle and will make your vehicle stand out on the street ! Fitment 2007-2018 Silverado/Sierra 1500 Extended/Double Cab (Including 2019 Silverado 1500 LD & 2019 Sierra 1500 Limited); 2007-2019 Silverado/Sierra 2500 3500 Extended/Double Cab; Do not fit 2007 classic model

• IMPORTANT – Only fit Extended Cab & Double Cab with 2 full-size front doors & 2 narrower rear doors, NOT for Crew Cab with 4 full-size doors. (Please check the Cab Size picture.)
• FITMENT – Compatible with Extended/Double Cab models for 2007-2018 Chevy Silverado/GMC Sierra 1500, 2007-2019 2500/3500HD. Also fit 2019 Silverado 1500 LD & 2019 Sierra 1500 Limited; Do not fit 2007 classic model. | EXCLUSION – This won't fit 2019 Silverado/Sierra 1500.
• Up to 300 LBS weight capacity for each side. Heavy-duty 2inch diameter tubes. One-piece design. Dual stage powder coated textured black finish. TYGER unique patented STAR metal step pads serve a helpful step in and out of the cab. Particularly useful on lifted pickup trucks & SUVs. Dual girder system provides maximum protection for underside from damaging impacts.
• Easy Bolt-On installation. (Trimming needed on 2017-Up models with plastic DEF tank cover)
• TYGER No-Hassle 5 year warranty against manufacturing defects!

User questions & answers

Question:	Can you get these for a 2014 crew cab. Or will these work
Answer:	nothing these are junk i just removed mine cuz the clips cut the sheet metal under the body . pulled it away and they rock and squeek. 2 of 3 spots on both sides ended up cutting the inner tins and started to mess the bottom holes. now i have to pay to reweld the spots if i ever wanna run new boards. these arw too heavy
Question:	Is the mounting hardware stainless steel or zinc? Will I need to replace bolts with stainless steel for protection from rust
Answer:	I don't know if they fit the crew cab. I just installed them on my new 2016 Silverado double cab and they bolted right up. I am very impressed with the quality. I needed to contact customer service about something and they replied the same day. [email protected] Good luck and I hope they make them for your truck
Question:	Anybody else have their running boards pull through the under body steel at the anchor clip attach point? If so, what is remedy
Answer:	I have a 97 F-250 4-door and it fits.
Question:	Need these for 2015 Silverado Crew. Don't see them listed
Answer:	I am not able to answer that. It was designed for my 1996 and that is what I put it on.

Product features

Outlast the Competitors

All tubes have sealed end caps to keep water and dirt out, and extend the life of your boards. TYGER Auto ensures that every step of production is done with quality control in mind. That is why they have perfected these black bars for better rust resistance. This entails the following three-step process:

1. Pre-treatment to remove impurities.

2. Special 'E-Coat' inside & out.

3. Dual-Stage Textured Black Powder.

Why Star Armor ?

• US Patented Design.
• Local Customer Support.
• TYGER Backs It.