13 best serger machines

Product description

Serger

• Heavy Duty Metal Frame
• 60% Larger Cutting Knife
• 2/3/4 Thread Capacity
• 8 Built-In Stitches
• 1300 Stitches per Minute
• 2 LED Lights
• Built-In Rolled Hem Plate
• X5004HD Serger

User questions & answers

Question:	Can I get a book for my serger a handbook
Answer:	I have not yet tried this method, but, I saw a post from someone who has shared your issue.Here is the post:How to remove crystals with Goo Gone:Use a tissue. I tried cotton rounds, but cotton left fibers behind.Saturate the tissue. You'll use lots of Goo Gone for this.Dab the front and back. Dab at the crystal area from both the front of the fabric and the back of the fabric to loosen the crystal.Don't tug. The crystal will loosen eventually. Don't tug on it the rest of the way or you'll remove some of the silver paint on the back of the crystal. Be patient and keep dabbing at the bugger until it releases on its own. Then you can re-use the crystal (with E6000 as a glue; you can't hotfix it again).Hotfix comes off easily. Hotfix crystals came off the pillowcase the easiest, but the E600 wasn't too bad. The crystals came off, but left a little lump of glue on the lycra. I just peeled off the little lumps.Do a practice run. Glue some crystals to a scrap of lycra before using the Goo Gone on a dress. You can take my word that it doesn't stain, but I'd rather you didn't. Give it a shot for yourself and see if it works for you.Update: lighter fluid, the kind you put in a lighter and is sold alongside tobacco, not charcoal, is terrific at removing crystals, both hotfix and E6000. As always, test first!Hope this answers your question and Good Luck !
Question:	Does this have a chain stitch? Thanks
Answer:	It wouldn't hurt to try, but the package does not specify use for rubber.
Question:	does this come with a waste basket
Answer:	If you are gluing costume jewelry, E6000 is a great option. For fine jewelry, I really can't answer that. Thanks!
Question:	Con este modelo puedo coser lenceria intima, bañadores, boxer, bralette y a las vez tambien jeans
Answer:	Yes.

Product features

Sergers: The Peak of Professionalism

Sergers sew, finish and trim away seams and raw edges in one easy step for professional looking results. No more fraying or unsightly seams using 2, 3, 4 or 5 threads to create overlocking stitches!

The SINGER X5004-HD Serger is complete with a heavy duty metal frame, this serger has different stitch types ensure the perfect stitch no matter what project: blind hems, rolled hems, flatlocking, finishing raw edges and sewing seams.

2/3/4 Thread Capability

The different stitch types ensure the perfect stitch no matter what project: blind hems, rolled hems, flatlocking, finishing raw edges and sewing seams.

60% Larger Cutting Knife

Cuts thick fabrics with ease.

Illuminate Your Sewing with LED Lighting

Clear view of the sewing area while eliminating shadows.

Quick and Easy Threading

Easy-to-follow color-coded threading guides.

Adjustable Thread Tension

Set upper thread tension for various threads and sewing techniques.

Built-In Rolled Hem Plate

Create beautiful rolled hems without changing the stitch plate.

Product description

The Brother 1034D serger features a 3/4 lay-in thread system with lower looper threader.Stitch options include 4 thread overlock 3 thread overlock narrow hem rolled hem and ribbon lock stitches.Additionally you can sew blind hem pin tuck and flat lock stitches by purchasing optional presser feet.The machine has a free arm/flat bed convertible sewing surface.The 1034D also offers a F.A.S.T. lower looper threading system for easy thread changes.The differential feed improves sewing results on stretch or thin fabrics to give you a perfect finish. Snap-on presser feet allow quick and easy changes to transition to each desired stitch.The 1034D also includes an instructional video tape to make serging fast easy and fun. This machine does not conform to International electronic codes. Warranty is voided outside the US.

• METAL FRAME: The Brother 1034D is a durable serger made with a high-quality metal frame and interior components
• HIGH PERFORMANCE: A reliable 3 or 4 thread serger that can handle multiple layers of denim and other heavy materials
• 1,300 STITCHES PER MINUTE: Get more serging done in less time by sewing up to 1,300 stitches per minute. Control speed with the included foot pedal
• EASY TO THREAD: Easy-to-use, color-coded upper thread guide and lower looper threading system along with included instruction manual and instructional video
• INCLUDED ACCESSORY FEET: The 1034D comes with 3 snap on feet including standard, gathering and blind stitch

User questions & answers

Question:	use as a sewing machine
Answer:	I know this is an old question and some of my answers are repeats, but if you are still using this machine and haven't come up with an answer maybe one of the following solutions from my own experience will help you. I love this machine and therefore completed an extensive search for answers to my questions which included: Brother Support (not that helpful), studying the manual carefully & repeatedly, asking sew 'n' vac store employees and lots of Google searches. Here, in no particular order, are advice/solutions that solved my gathering/bunching issue and many other issues. 1. PROPER UPPER THREADING: Regarding threading, let me advise that the thread will jump out of the correct lineup at times so if your stitch changes in a bad way, check that first. Also, I had to use a clip over a piece of foam on the last guide before the needle guide because it popped out constantly, regardless of checking, rechecking and having others check my threading. 2. PROPER BOBBIN THREADING: I am forgetful so actually check the manual each time I thread a bobbin. Improper bobbin threading will really mess you up. 3. CORRECT NEEDLE SIZE & TYPE for specific fabric--VERY IMPORTANT!! Some of this is trial and error. Not all needle/thread guidelines I found applied to my situation. I tried Schmetz--130/705, HaX1 of 15x1--the Brother manual states this as an alternative, but Organ HLX5 (not sold locally) is best. DO NOT use the Schmetz "UNIVERSAL" needles if you are working with a fabric that specifically requires sharp or ball point. The Universal has a slight ball point--not sharp not full ball point. Learned that the hard way. 4. CORRECT THREAD FOR SIZE OF NEEDLE, TYPE OF FABRIC AND EXPECTED END RESULT. (superiorthreads.com is an awesome resource for this and many other sewing, quilting, embroidery questions. They have tons of educational articles and you can email them and receive friendly, personalized assistance for your particular situation. This is not a conflict of interest because Superior does not sell sewing machines and the articles and email support are available even if you don't purchase Amazon does sell a very few Superior products but not many.) Before Superior, I had no idea how many variables were involved in sewing and learned more about thread than I ever wanted to know, but need to know. 5. TENSION--BOTH UPPER TENSION AND BOBBIN TENSION. This is the first machine I have owned that both could be adjusted. Check manual for what correct tension should look like and how to adjust (admittedly the manual is not extremely clear). Bobbin tension is tightened or loosened by a screw at the bottom of bobbin case, and upper thread tension is adjusted by the small knob on the left side midway down. This knob has numbers, but they are essentially useless (even Brother agrees). They are there just to show the concept of righty tighty, lefty loosey--again, trial and error. 6. The LARGE DIAL TO THE RIGHT adjusts the stitch length, NOT the Tension. 7. Always keep the top thread guide pulled to maximum height, and make sure thread is coming out from the correct direction. Thread stands can also help although I have not tried one. Amazon sells these, several kinds. 8. If you use cone spools or slippery thread, you can purchase netting that will keep it from sliding and bunching at the bottom. 9. I have not yet figured out the best setting for the FEED DOG in various situations, but I do adjust it often if feeding seems difficult so far staying mostly within the light green area. Bottom line, your problem could be caused by any, all or some of the above factors. Good luck if anyone finds this answer useful. I can add photos, I think, if needed. Pretty sure this is the longest question answer I have ever written so I am not going to re-read, sorry for any typos or excess rambling.
Question:	I have never serged before, I need a very simple to thread machine. any suggestions for me
Answer:	Throat space is the area to the right of the needle when seated at the machine. It is the open area between the needle and the vertical side of the machine that determines how much fabric might fit comfortably within that space when sewing on your project.
Question:	My 8 thread Baby Lock recently broke and i am desperate to get a replacement. Will I be satisfied with the Brother 1034D? I have a Brother Inovis an
Answer:	Yes, there are many feet, including a walking foot. If you want a 1/4 foot with an "edge" on it, you would have to purchase one from the sewing outlet.com ($15.99). I like to sew with the edged 1/4 inch foot. Otherwise, there are many presser feet, including the free motion foot. You can drop the feed dogs to free motion. This is a great quilting machine and has excellent "pin feed," which moves the fabric through like butter. First time threading took longer for me, but after that it was free sailing.If you want to make quilts faster like I do, this is a great machine. I used to quilt with my Bernina, but I like the Brother better. It is more affordable and well made. You should also know that if you use thicker threads (I always use 100% cotton from ConnectingThreads.com), that you will need an 80/12 needle instead of the smaller ones due to the way the machine's tension is set up. Hope this helps,Vivian from Wisconsin
Question:	I am looking at a tee shirt hem. It has 2 top stiched straight lines and the underside has the loops. Will this machine do this
Answer:	It measures 8 3/4 inches from needle to right side of machine. It is 6 1/2 inches high from base to top of opening.

Product description

The S0230 serger saves time by sewing a seam and seam finish at the same time, while trimming away the excess seam allowance. Seams and seam finishes – just like you see on store-bought garments – are possible thanks to the serger. You can use 2 threads, 3 threads or 4 threads for a variety of stitch combinations. Sew narrow hems on napkins, or stitch up a knit top with seams that stretch with the fabric without popping. Create a decorative edge around a fleece blanket for an extra bit of flair. Differential Feed allows you to sew super stretchy fabrics without the wavy distortion and sheers without puckering. The Built-in Free Arm makes it possible to sew around small sleeves and cuffs - great for children's clothing and more. You'll love the professional results your serger gives your projects.

• Featured on Making The Cut
• 2, 3, or 4 Thread Stitches
• Color-Coded Threading System
• Differential Feed
• Free Arm
• Sews 1,300 Stitches Per Min
• Adjustable Tensions & Stitch Length

Product features

2, 3, or 4 Thread Stitches

The different stitch types ensure the perfect stitch no matter what project: blind hems, rolled hems, flatlocking, finishing raw edges and sewing seams.

Adjustable Tensions & Stitch Length

Sew perfectly balanced stitches on all fabric types.

Sews 1,300 Stitches Per Minute

Finish your projects quicker with a fast stitching speed.

Product description

a (2.8 mm) screwdriver which is quite useful for bobbin case tension adjustment, a 0.177 inch (4.5 mm) which can be used for general care, a tweezer for removing those stubborn threads that have gotten caught in the feed dogs and clogged the machine and a large a double headed lint brush with different hardness bristles to let you clean different parts of your machine.

• Sewing Machine, Overlock & Serger Service Kit - Maintain Your Machine Like A Pro.
• For Both A Normal Sewing Machine And An Overlock Machine.
• The kit includes: 2 screwdriver, tweezer, Double headed lint brush
• All the tools are made up of high-quality materials to ensure that they durable and help in easy maintenance of your machine over a long period of time.
• a (2.8 mm) screwdriver which is quite useful for bobbin case tension adjustment, a 0.177 inch (4.5 mm) which can be used for general care, a tweezer for removing those stubborn threads that have gotten caught in the feed dogs and clogged the machine and a large a double headed lint brush with different hardness bristles to let you clean different parts of your machine.

User questions & answers

Question:	Are the screw driver short to reach under the arm to get screws out on bobbin plate
Answer:	The opening in the table top is 7 3/4" x 18" If your machine is smaller than that, it will fit.

Product description

Serge with confidence on multiple layers of denim, layered knits, and heavy-duty fabrics with this heavy-duty Brother Serger. The ST4031HD is a durable, heavy-duty serger that is made from high-quality metal inside and out. This is a 3 or 4 thread serger that allows users the flexibility to handle thick materials with ease, yet has the precision to work with lightweight fabrics. The Brother ST4031HD includes a high-durability blade made from carbon steel that can cut a smooth, clean edge though multiple fabrics without hassle.

The strong interior metal frame helps ensure your serger remains stable on your work surface, even at very high speeds. The wide, detachable table built into the ST4031HD keeps heavy fabrics on a level surface with the needle, helping to prevent excess pulling on the needle and thread for better finishing. The Brother Serger allows you to get more serging done quicker by sewing up to 1,300 stitches per minute. To adjust the speed, simply apply less pressure on the foot controller to suit your individual comfort level.

This serger works with either 3 or 4 threads for added flexibility. For example, 4 threads are useful for a strong overlock seam on woven material and 3 threads for overlock stitching on knits or suits. The color-coded guides printed on the machine show you exactly where to place each thread for trouble-free threading. The Brother ST4031HD comes with large spools of serger thread, sewing feet, a soft cover, an accessory bag with a needle set, 4 thread spool caps, 4 thread nets, tweezers, a cleaning brush, a hexagonal driver, a trim trap, a foot controller pedal, an instructional DVD, and an instruction manual. The ST4031HD is backed by a 25-year limited warranty with free technical phone support for the life of the product.

• Metal frame: The ST4031HD is a strong, reliable serger built to tackle heavy duty projects with its sturdy metal frame
• High performance: This Strong & Tough series 3-4 thread serger has a high durability blade made from extra hard carbon steel, producing a smoother cut edge and a clean, professional finish
• 1,300 Stitches per minute: Get more serging done in less time with a maximum sewing speed of up to 1,300 stitches per minute
• Easy to thread: Color-coded thread guides along with numbered upper and lower thread loopers make the ST4031HD easy to use
• Included accessory feet: 3 accessory feet come with the ST4031HD including standard, blind stitch, and gathering feet along with a large extension table for bigger projects

User questions & answers

Question:	Im a beginner at sergering, which one: 1034d or st4031hd and why
Answer:	A regular sewing machine would be so much better and easier! I also own a Brother SE 400 and LOVE It! I would choose it over the Brother 1034D Serger.
Question:	Can you serge denim and vinyl
Answer:	This serger is much easier to thread than others I have owned and used but it's not as simple as threading a regular sewing machine.You must thread in the correct order to be successful. Watch some of the YouTube videos that demonstrate threading this machine. Then what I did was place a sticker underneath each tension dial and with a Sharpie marker, I wrote 1, 2, 3 and 4 on the appropriate sticker. That way I can tell at a glance what order I need to thread in.
Question:	Can this machine do rolled hems like on tulle and silky fabrics
Answer:	Ouch. Hopefully, they have good customer support to help you. The 1034D will do what a 4-thread serger does and you won't be disappointed. But that's about it.
Question:	What is the deferent between st4031hd and 2340cv
Answer:	If you want that double line of stitching that covers the raw edge of your hem on the back of the work, you can use a regular sewing machine and a double needle. It is a stretchable stitch so you can use it on knits or wovens. Double needles come in a couple different widths and aren't very expensive--a lot cheaper than a cover stitch machine! The wrong side of the fabric will look somewhat like it's been zigzagged. You just use 2 spools of thread on top or a spool and a wound bobbin of the same color. That's why there are usually 2 thread pegs on your machine. Hold the 2 threads together & thread the machine as usual until you get to the last 2 thread guides, then separate them so they don't twist together near the needles.

Product features

Brother ST4031HD Strong & Tough Serger

Get professional results on everything from heavy duty fabrics to lightweight knits with the Strong & Tough Serger from Brother. Its industrial-grade blade is manufactured of carbon steel that meets rigorous G3 standards, and as a result can cut evenly and smoothly, even through multiple layers of denim. The heavy duty metal frame provides stability while serging at high speeds, and durability for many years of extended use. The ST4031HD gives you the creative freedom to serge layers of denim, difficult knits and other tough projects with ease.

Tackle heavy fabrics

Serge with confidence on multiple layers of denim, layered knits and heavy duty fabrics. Professionally cut and finish in one easy step on a wide range of projects.

Industrial-grade G3 blade

The Strong & Tough blade is manufactured of carbon steel that meets industrial-grade, G3 standards. This blade material is known for its use in industrial sergers, and its ability to cut a smooth, clean edge through heavy fabrics.

Heavy duty metal frame

The strong interior metal frame helps ensure your serger remains stable on your work surface, even at very high speeds. This heavy duty frame is built for durability and longevity, for many years of extended use.

Wide extension table

The wide, detachable table keeps heavy fabrics on a level surface with the needle, helping to prevent excess pulling on the needle and thread, for better finishing.

Up to 1,300 stitches per minute

Get more serging done, faster, with the ability to sew up to 1,300 stitches per minute. Simply using less pressure on the foot controller allows you to sew slower, to suit your comfort level and project.

Metal thread stand

The Strong & Tough Serger thread stand is made of solid metal, for enhanced durability and longevity. The thread stand helps ensure that the thread feeds up and off your thread spools correctly.

3 or 4 thread capabilities

This serger works with either 3 or 4 threads, for added flexibility. For example, 4 threads are useful for a strong overlock seam on wovens, and 3 threads for overlock stitching on knits or suits.

Color-coded threading guides

The color-coded guides printed on the machine show you exactly where to place each thread, for trouble-free threading. No need to pull out the manual when you want to thread your machine!

Removable trim trap

The trim trap collects the fabric trim as the serger knife trims and serges your project, and can be easily detached from the serger.

Differential feed ratio of 0.7 to 2.0

The differential feed controls the movement of the feed dogs that move the fabric through the machine. The ability to adjust the feed dogs helps provide smooth, even stitching and versatility.

Convenient stitch width control

Simply turn the stitch width adjustment dial to change your stitch width between 5.0mm (3/16 inch) and 7.0mm (9/32 inch). Adjusting the stitch width allows you to create serged seam finishes that lie flat.

Standard foot

The included Standard serging foot is a great general purpose foot for a wide range of everyday serging projects such as seams and rolled hems. Your fabric edge will be sewn and trimmed in one easy step.

Blind hem stitch foot

Create blind hems on a variety of fabrics. This foot is perfect for edge stitching, attaching lace or fabric, and edge joining. An adjustable, open-toed guide makes this a great foot for both embellishing and utility stitching.

Gathering foot

Easy gathering, connecting fabric and edge finishing in one step. A channel on the foot secures fabric, helping to eliminate the need for pins as you create a serged edge and gather single or double layers of fabric.

What's In The Box?

- ST4031HD Strong & Tough Serger.

- Wide table.

- 3 Feet: Standard, blind stitch and gathering feet.

- 4-Piece needle set.

- 4 Mini thread spools.

- 4 Spool caps and 4 Thread nets.

- Trim trap.

- Tools.

- Foot controller.

- Instructional DVD.

- Dust cover.

Product description

At 6000 yards with 0 breakage, these long lasting spools will be the match you have been looking for. Each spools net weight is 120g Not recommended for single thread sewing.

• Total of 24,000 Yards!
• ideal for all sorts of embroidery projects – The threads are ideal for Brother, Babylock, Janome, Singer, Pfaff, Pegasus, Juki, Husqvarna, Bernina and all other types of sewing machines.
• Good for any home or Commercial Machine. Use for Serger, Over lock, Merrow, single needle etc.

User questions & answers

Question:	Will this work on embroidery machine
Answer:	I really haven’t noticed that much difference in the screen protector on this case from the tempered glass I had on the phone before purchasing the Youmaker case.
Question:	Will this work on knit fabrics
Answer:	You will need to attach another magnet to the case. You may not be able to use the wireless charging with a magnet on the case.
Question:	Will this thread fit on a standard (non serger) Brother sewing machine
Answer:	It does come with a screen protector and it fits perfectly.
Question:	Work in brother
Answer:	I have my old tempered glass. So I broke the built in one with carefully. It’s not easy to to take it off but it’s not too hard :) . Right now, I’m happy with this case without the built in film protector.

Product description

Upper and Lower Knife / Blade for many Home Serger Sewing machines.

Fits

Serger 14U Series Model, 14U12A, 14U13A, 14U23A, 14U32A, 14U34B, 14U44, 14U44B, 14U46B, 14U52A, 14U53A, 14U64A, 14U65B, 14U85B, 14U234, 14U234B, 14U285, 14U286, 14U344, 14U354, 14U444, 14U454, 14U454B, 14U544, 14U554, 14U555, 14CG744, 14CG754, 14SH654, 14SH644, 14SH744 & 14SH754, Pro4D and more

Babylock: BL202, BL302, BL400, BL450,

Elnitalock: T-3, T-33, T-34, T-34D,

Happylock: 1867,

Serge-Mate: 300, 430, SW432, 4350D, 5030, 5040L

Pfaff: 756, 4762, 4772,

Consew 14TU854

Omega Serger 303SI, 334D, 15J103, 15J134

Riccarlock: RL613, RL613E, RL624, RL624E, RL634DE, RL724E, 564DE

Simplicity: SL200, SL350, SL370, SL390, SL803, SL804, SL804D, SL843, SL4300, SL4360ED

Part # 412585,550449

• Upper knife 412585 Lower Knife 550449
• Singer 14U overlock Blade 14CG754, 14SH654, 14SH644, 14SH744
• For Babylock: BL202, BL302, BL400, BL450
• singer 14u knife sets
• Pfaff: 756, 4762, 4772 overlock knife

User questions & answers

Question:	Do you have the set screw for the lower knife for the singer profinish model 14cg
Answer:	There are snap-out / snap in holders.

• PROTECTIVE: Made of heavy-duty nylon. (Accessories are not included)
• MAIN COMPARTMENT: The adjustable straps with buckle on the main compartment to secure the serger machine. A removable bottom padding pad to reduce the risk of transporting.  
• ACCESSORIES POCKETS: The front pocket (includes 2 translucent zip pockets and 4 mesh pockets) and 2 side pockets for putting scissors, power cord and the like.
• CARRYING OPTIONS: Attached with sturdy handles, a detachable anti-slip shoulder strap and a detachable trolley dolly. (Please follow the installation guidance to put the serger machine case on the rolling part).
• DIMENSIONS: Outer dimensions:13.5" x 11" x 13". Inner dimensions:13" x 10.5" x 13". Fits for most standard sergers like Brother and Singer.

User questions & answers

Question:	Do you make a larger version for a husqvarna
Answer:	no
Question:	I just bought a Babylock Evolve. Would this work for my new machine
Answer:	Única mesa
Question:	will this hold a viking huskylock
Answer:	52lb
Question:	Does the handle for the dolly fold down or is it removable for easy storage
Answer:	I didn't order a brown color but my white sewing table is amazing!

Product features

PROTECTIVE

• Made of heavy-duty nylon.
• NOTE: Accessories are not included.

Product description

The SINGER Professional 5 14T968DC Serger machine has 2-3-4-5 thread capability providing a wide selection of stitch options for all types of projects with professional results every time. It saves time because it sews a seam, seam finish, and trims excess allowance all at once – 3 steps in 1. Creative stitch options and fabric combinations can expand your creativity.

The SINGER Professional 5 14T968DC Serger sews at 1,300 stitches per minute while trimming and overcasting, you will zip through projects in no time. Decorative flatlock and easy rolled hems add a finishing touch to garments, home decor projects and more. An adjustable cutting width, stitch length control, self-adjusting tension system and color-coded threading allow for creative freedom and easy set-up!

Achieve an expert to your projects using the SINGER Professional 5 14T968DC Serger. It has 2-3-4-5 thread capability, providing a wide selection of sewing options for all types of projects. Other features include an adjustable cutting width, stitch length control, an automatic, self-adjusting tension system and color-coded threading. This 5-thread serger offers easy setup and comes with numerous accessories.

 

 

PRODUCT DETAILS:

Model: 14T968DC

Brand: SINGER

Manufacturer Part Number: 14T968DC

Type: Sergers

Assembled Product Weight: 23.55 pounds

Product Dimension (L x W x H): 13.50 x 10.30 x 11.00 Inches 

Light Bulb: 120V 15Watt

Needles: SINGER Style 2022

MPN: AZ59C37250B7680

EAN: 910139588723

UPC: 102930991400

Do not pull or push fabric while stitching. It may deflect the needles causing them to break. High Speed Stitching (1300/min)

• SINGER PROFESSIONAL SEWING MACHINE: The SINGER 14T968DC Serger machine has 2-3-4-5 thread capability providing a wide selection of stitch options for all types of projects with professional results every time.
• SELF-ADJUSTING TENSION: The SINGER 14T968DC Serger has a self-adjusting tension system. Simply turn a dial to select the chart, and the tension settings for that stitch are adjusted automatically.
• SEWING SPEED: The SINGER Professional 5 14T968DC serger has a maximum sewing speed of 1,300 stitches-per-minute, so projects can be sewn quickly.
• 4 BUILT-IN ROLLED HEMS: The SINGER Professional 14T968DC 5 sewing machine converting to the Rolled Hem sewing mode is effortless. An easy access lever moves the stitch finger in position for rolled hemming.
• BEST SEWING MACHINE: The SINGER Professional 5 14T968DC serger has a wide range of stitch options for sewing seams, hems, decorative edges, rolled hems, cover hems, and more..Amps : 0.5
• This sewing machine is warranted for use in the US and Canada at 110 volts only. Note: To ensure proper stitching, it is important to keep tension while threading the machine.
• Limited 90-DAY Warranty for Adjustments, Belts, Rings, Bulbs, Attachments; Limited 2-Year Warranty for Motors, Light assembly, Wiring, Switches,Speed control and Electronic Components; Limited 25-Year Warranty for Sewing Machine Head

User questions & answers

Question:	Has anyone's clutch button gotten stuck in the up position? That's the button that switches your serger between coverstitch and overlock mode
Answer:	Yes the same clutch problems happened so I bought another serger and keep this in cover stitch mode. [set by a technitian] Will sell as I never use it.
Question:	Does this machine do heavy material
Answer:	The Singer 14T968DC serger is a home serger. It can sew several layers of denim weight fabric, but may not be suitable for 4-5 layers of upholstery type fabric. This machine does not have presser foot pressure adjustment so too thick of fabric will raise the presser foot high enough to release the tensions.
Question:	I have been using a brother 1034d. is this singer any harder to use than the brother
Answer:	We only have information on Singer brand sewing machines; therefore we are unable to compare with a different brand. The Singer model 14T968DC comes with a CD Workbook, which shows you exactly how to use each stitch. There is also loads of additional support via instructional videos and a Customer Care line where our call center representatives will be happy to answer questions and help you to have a great sewing experience with the Singer model 14T968DC serger. The toll free Customer Service line number is 1-800-474-6437. We have expanded our hours to 8:00 AM - 8:00 PM CST, Monday to Friday. We now also have Saturday hours and are available from 8:00 AM till 2:00 PM CST.
Question:	Can this machine do a good cover stitch
Answer:	I know this is an old question but I hope it will help someone. I just tried this serger last night for the first time. The first stitch I did was the tripple coverstitch. It took me half an hour to thread it, but now that I have done it, I am sure it will take me less than 5 minutes next time. I am new to household sergers (used an industrial overlock over 20 years ago). Once I got it all set up, I was very pleased with the quality of the coverstitch. So far I don't regret buying this machine vs. high end brands.

Product features

Sewing Made Easy.

Sergers sew, finish and trim away seams and raw edges in one easy step for professional looking results. No more fraying or unsightly seams using 2, 3, 4 or 5 threads to create overlocking stitches!

Attachable Clean Pocket

Keeps your sewing space clean by catching trimmed fabric.

5-4-3-2 Thread Capability

Different stitch types ensure the perfect stitch, regardless of the project: Cover Hems, Chain Stitching, Rolled Hems, Flatlocking.

Fully Automatic Self-Adjusting Tension System

Sew perfectly balanced stitches on all fabric types.

Color-Coded Threading Diagram

ust follow the color-coded diagram for easy threading.

Product description

Product Features

1. Feed Thread Smoothly - Sew Tech adjustable single thread holder feeds thread smoothly through the hook at the end of the tall guide bar, making thread tension consistent and reducing thread breakage, winding and tangling problems, particularly ideal for cross-wound large spools and cones

2. Height Adjustable - The tall metal guide bar is height adjustable, helps to feed thread to your machine with machine’s special height requirements, which is nice to have

3. Premium Quality and Appearance - Its elegant appearance will surely add a touch of beauty to your room, durable material is selected for the production, and the heavy base makes sure the thread holder stay firmly

4. Easy to Assemble - Sew Tech stand-alone cone thread holder for sewing machine is very simple to assemble

5. Wide Use - Sew Tech cone thread adapter stand fit most of spool sizes, especially for the large spool or cone, which can not be placed on your machine, this free-standing universal thread stand works with all Brother Singer Baby Lock Bernina Husqvarna Viking Pfaff Janome Elna embroidery sewing quilting serger machines

 

Packing List

Packing List: 1 set of Sew Tech Adjustable Single Thread Stand parts with assembly instruction is included

Easy Assembly Notes: Please follow the assembly video on this page or the assembly instruction in the product package

 

About Sew Tech

Sew Tech is proudly celebrating over 15 years of excellence in Sewing and Embroidery field, providing quality products and warm service, accompanies your happy sewing time.

• Feed Thread Smoothly - Sew Tech adjustable single thread holder feeds thread smoothly through the hook at the end of the tall guide bar, making thread tension consistent and reducing thread breakage, winding and tangling problems, particularly ideal for cross-wound large spools and cones
• Height Adjustable - The tall metal guide bar is height adjustable, helps to feed thread to your machine with machine’s special height requirements, which is nice to have
• Premium Quality and Appearance - Its elegant appearance will surely add a touch of beauty to your room, durable material is selected for the production, and the heavy base makes sure the thread holder stay firmly
• Easy to Assemble - Sew Tech stand-alone cone thread holder for sewing machine is very simple to assemble
• Wide Use - Sew Tech cone thread adapter stand fit most of spool sizes, especially for the large spool or cone, which can not be placed on your machine, this free-standing universal thread stand works with all Brother Singer Baby Lock Bernina Husqvarna Viking Pfaff Janome Elna embroidery sewing quilting serger machines

• PROTECT YOUR PRECIOUS MACHINE: Using well padded sidewalls, extra cushioned bottom and padded front pockets, you can be assured that your serger sewing machine and accessories will stay protected when traveling. This safety and stylish carry case designed to offer safe and dust free options, also protect from bumps and scratches
• TRAVEL WITH YOUR SEWING MACHINE: This lightweight tote bag is the most stylish and efficient way to take your machine and tools on the road or storage at home! A carry handle & an adjustable shoulder strap provide 2 different carrying ways. You can easily take your whole craft room to a class, a meet up or on holiday
• GENEROUS STORAGE SPACE: Storing machines up to 13.75 x 11 x 13.25 inches. Spacey main compartment fits most standard sized serger machines, compatible with SINGER, Brother, Janome, Juki. Large front pocket provides roomy space to hold serger items you may need organizing with - be it needles, thread, presser foot, scissors or any other serger accessory
• PREMIUM QUALITY & DESIGN: This tote is made with the end user in mind and crafted with durable material to ensure the best product possible. The full zip makes it easy to access
• 100% MONEY BACK & RETURN GUARANTEE: If you are not satisfied with your tote bag, the HOMEST team is ready to help. We offer 2 years quality warranty on every carry bag purchased, our enthusiastic customer service team is eager to help with any questions or problems about our bag series

User questions & answers

Question:	would this case fit my juki mo-2000qvp machine when the spools are attached
Answer:	Sorry, we do not have that screw set
Question:	is one side clear
Answer:	I think it would depend on your machine. These screwdrivers are not as short as the ones I use to get out screws from the plate, and neither of them is narrow enough to loosen the needle clamp screw when I change needles. I was disappointed in the set.
Question:	Hello. would it fit happy 1100dsr overlooking machine
Answer:	Particle board. Difficult to assemble. Three trays on the door have already broken off because screws are too short.
Question:	Se puede usar para mini máquina de coser
Answer:	Good luck... we had a hell of a time even with the instructions.

Product features

Universal Overlock Machine Tote

Travel in style while keeping all of your sewing equipment together and safely protected. HOMEST Serger Machine Tote Bag lets you take your overlock machine on the go with style and ease. Beautiful outer durable material is great looking appearance and sturdy. But don't let their pretty exteriors fool you! These bags have all the sturdy features a traveling sewist needs: strong handles, accessory pockets, and tons of space.

Safe and Protected

This carrier is constructed around layers of padded, so no matter how many times you need to shove it in the back of a car, your serger machine is fully protected. It doesn't just protect your machine from the debris and other physical damage but also organize all of your notions, books, and patterns out of the way while you're on the go.

Spacious Compartment

This sewing machine case can storing machines up to 13.5 x 11 x 13.25 inches. Fits many popular serger machines, compatible with Brother 1034D, R1634D, ST4031HD, DZ1234, SINGER ProFinish 14CG754, Juki, Bernette, Janomeand more!

Space for Serger Notions

Do you wish you could take your sewing room on the go with you? This bag thoughtful features 1 x front large pocket to keep your notions organized at hand wherever you are - be it needles, thread, presser foot, scissors or any other serger accessory

Premium Quality

The tote have crafted with durable material and fully cushioned ensuring utmost safety to the beloved machine in the bag. Made of the finest materials by keeping in mind the wear and tear of the overlock machine along with the bag, this tote bag stands out on the list. It is also a great gift for sewers of all skill levels.

Multifunctional Sewing Machine Tote

Whether you're just going to sewing class, or you're traveling across the country, you deserve a bag that fits your style. With convenience carry handles and an adjustable over-the-shoulder strap, this bag is perfect traveling.

You can easily take your serger room to a class, a meet up or on holiday. Sized 13.5 x 11 x 13.25 inches, it's an essential companion for most standard sized overlock machines. Simply measure your serger sewing machine to see which adorable bag will work better for you!

PLEASE NOTE

BAG ONLY, ACCESSORIES NOT INCLUDED

Product description

Brother Universal Sewing Machine Case 2piece carrying and storage case. Fits any freearm sewing machine and most sergers. Molded from durable but lightweight plastic. Locking metal side hinges; builtin handle; stayclean surface.

Structured to fit any free-arm sewing machine and most sergers, this Brother universal carrying case offers protection and easy transport for home sewing appliances. The two-part case is formed from durable hard plastic that is strong but lightweight, and the molded form adds extra protection. Hinged metal locks close the lid securely, and a built-in handle makes carrying easy. Great for taking sewing machines on the road or safe-keeping them when they are not in use, the case is made in the USA and measures 17 by 11.5 by 14 inches. --Emily Bedard

• 2 piece carrying and storage case; Weight (Approximate) : 5 pounds
• Model Compatibility: SE-270D, XL-2230, PS-1000, PS-1250, LS-2125i, XL-2610, XL-2600, XL-5500, XL-5600, XL-570
• Molded from durable but lightweight plastic
• Locking metal side hinges; built in handle; stay clean surface

User questions & answers

Question:	Will this fit the brother xr3240 portable machine currently offered at costco
Answer:	I just use it on my Brother serger I don’t know about embroidery machine I ordered Black to they work very good I have no problems with the thread I always read the reviews to see how it works with other people
Question:	The dimensions are listed as 17x11.5x13.5 - are these the inside/internal dimensions, or the outside
Answer:	So far, I have used it on double blended poly, jersey, and bullet fabric with no issues!
Question:	Will this case fit the Brother XR1355 Computerized 130-Stitch Sewing & Quilting Machine ? Thank you
Answer:	The thread will fit through the needle, and through the pathways it has to follow. However, the spool is conical, and the lower opening is considerably larger than the spool holder on the machine. It will wobble during use.
Question:	Will this fit the Brother CS 6000i sewing machine
Answer:	Yes works good in my brothers surger

Product description

Serger Pad/Trim Catcher is a large 12 by 12 pad area that fits under all sizes of major brand sewing machines. The special foam backing absorbs machine vibrations. Protects table surface and prevents machine from crawling. The trim catcher bag quickly detaches for easy removal of contents. Helps prevent scrap waste from cluttering floor. Makes the work area safer. Work-saving convenient and cost effective. The polyethylene foam bottom can be placed directly on furniture without scratching. Provides a quieter work environment. Made of selected material to withstand rugged physical abuse. Measures: 12 by 12.

• Use the trim catcher bag for easy removal of contents
• Includes one 12-inch-by-12-inch serger pad and trim catcher
• Protects table surface and prevents machine from crawling
• Foam backing absorbs machine vibrations

User questions & answers

Question:	Will this work with a Baby Lock Victory
Answer:	Sorry, we don't have. This case fits for most standard sergers like Brother and Singer.
Question:	How does the bag attach? In other words, what is keeping the bag secure
Answer:	Measure your machine and compare to the dimensions listed for the inside of the bag. It is quite a roomy bag with side pockets.
Question:	Measurements say 12x12 but in product description it says 16x12. If i need 12x12 for under machine is it deep enough for bag to hang over table
Answer:	The Inner dimensions of this case is: 13" x 10.5" x 13". Please purchase according to the size of the machine.
Question:	do you have to use special bags with this
Answer:	Yes, it is detachable and foldable.