13 best circle paper cutters

Product description

Whether you're right- or left-handed, you can easily cut circles with this OLFA circle cutter. To cut perfect circles, from 1-1/2" to 8-3/4", use a clockwise stirring-the-soup motion. The patented ratchet handle aligns your hand and wrist to help reduce wrist fatigue. Use the cutter to create Yo Yos, crescents, circle applique and penny rug circles from fabric, felt, fleece or paper.

From the Manufacturer

Whether you're right- or left-handed, you can easily cut circles with this OLFA circle cutter. To cut perfect circles, from 1-1/2" to 8-3/4", use a clockwise stirring-the-soup motion. The patented ratchet handle aligns your hand and wrist to help reduce wrist fatigue. Use the cutter to create Yo Yos, crescents, circle applique and penny rug circles from fabric, felt, fleece or paper.

• Effortlessly cut perfect circles from 1-1/2" to 8-3/4"
• Patented ratchet handle aligns the hand and wrist to help reduce wrist fatigue
• Handle design creates a "stirring the soup" cutting motion, preventing uncomfortable twisting or strain on the wrist
• Built-in blade cover and plastic pivot spike guard for safety when not in use
• Includes and fits the OLFA 18mm rotary blade

User questions & answers

Question:	How does this do with cutting denim
Answer:	Overall is appr. 5.75" Be aware that there is a shank of approx. 31/32" so that must be deducted from the usable length.
Question:	If I am going to cut paper, is it going to poke a hole in the middle
Answer:	I have only used these on poplar, DF, walnut, and maple. They worked fine for me. For the extreme hardwoods, you may need to step it up.
Question:	Which are the correct replacement blades for this item
Answer:	They’re all smooth shaft up thru 3/8”. Then 3/8” chuck after that. They’re nice bits. I’m building a wooden clock and they are working great.
Question:	Will it cut through foam sheets? Thin couple of millimeters
Answer:	I've chucked up 9 of the 29 bits so far in my drill press. They've ranged from 1/16 all the way up to 1/2. All of these have been spot on straight. That is, the point when spinning remains a point and does not travel in a circular pattern. I would buy them again from what I've seen in my 31% test sample.

Product features

OLFA Rotary Circle Cutter

Cut circles in one step with this easy-to-use OLFA circle cutter. When you grasp the handle, use a stirring-the-soup motion to cut perfect circles. The ratchet handle aligns your hand and wrist to help reduce wrist fatigue typically associated with cutting in a circular motion. Use the cutter to create Yo Yos, crescents, circle applique and penny rug circles.

• Effortlessly cut perfect circles from 1-1/2″ to 8-3/4
• Built-in blade cover and plastic pivot spike guard for safety when not in use
• Includes and fits the OLFA 18mm rotary blade

Product description

Specifications:

Name: Rotary Circle Cutter

Lightly and easily cut round, a total of 3 cutter heads, cutting diameter 10.3-33.5CM

Packing size: about 7.3 * 12.3 * 4.3cm/2.87*4.84*1.69in

Circular cutter size: about 7 * 12 * 4cm/2.76*4.72*1.57in

Weight: about 80g

Material: plastic

Color: green and orange random hair

Packing List: 1*Rotary Circle Cutter

• 【Easy to Cut Round】: The rotary circle cutter is easy to cut round, a total of 3 heads, cutting diameter about 10.3-33.5cm/4.06-13.19in.
• 【How to Use】: Lock the handle in three positions and rotate-the classic handle provides a familiar feel and control.
• 【High Quality Material】: High quality, finely ground, high quality steel 45mm rotating blades keep sharp.
• 【3 Cutter Heads】: A total of 3 cutter heads, cutting diameter 10.3-33.5CM, cutting the diameter from 5 inches into a 12-inch circle.
• 【Force Position】: When cutting thick materials, it can provide a force position to increase the force; the ergonomic principle to the left or right can reduce the wrist pressure and improve the sight.

User questions & answers

Question:	Cut paper? Cardstock? Buy replacement blades separately
Answer:	I'm not familiar with the plastic version or the phone you're using. I can tell you this adjustable aluminum stand makes a solid base for my iPhone 10 in a heavy Mophie battery case. At $24 with shipping, it's probably more expensive than the plastic version, but I don't ever see a need to replace it.
Question:	Why are there no directions in English
Answer:	It also has a black one, but it will take a few days for the black to arrive.

Product description

LION Ev-R-Round Perfect Circle Cutter for scrapbooking or other craft & artisanal projects. Skillfully constructed small circle cutter leaves no trace of a center pin mark and will smoothly cut a 1 inch circle. Circle can range from 3/4" - 6-3/4" diameter. For even larger circles, use CE-700P to increase range to 6-1/4" up to 15-3/4" diameter, (extension beam, sold separately). Simple-to-use circle cutter for paper is perfect for making crafts, models & other light-duty jobs. This convenient little craft circle cutter has two built in storage compartments to hold extra blades. Includes 45 degree refill blades and a centering guide to assist in finding the center point. Professional blades are made of high quality carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Made in Japan.

• Circle cutter
• Dia. (3/4" - 6-3/4")
• Centering guide
• # of blade included: 6 (1 already set to the body + 5 extra in built-in compartment )
• Replacement blade: BDA-200P
• Cutting Material: Paper, card stock, soft film, leather, thin rubber sheet, any other thin material.
• Made in Japan

User questions & answers

Question:	Does this adjust to cut out a 15/16 inch circle
Answer:	Yes. https://www.lionop.com/nt-cutters-and-blades/circle-cutter-craft-circle-cutter-c1500.asp
Question:	How well will it cut felt
Answer:	I never tried to cut felt. The “blade” is small. Works great on paper but could only score cardboard or 140# watercolor paper.
Question:	Can this cut into Card stock paper
Answer:	yes.
Question:	Can this cut 1 inch circle
Answer:	Yes, perfectly. You can adjust it to cut 3/4 inch to 6-3/4 inch circles. I love this little tool.

Product features

NT CUTTER Circle Cutter, 11/16 inch to 6-11/16 inch Diameter

Description:

Light-Duty Circle Cutter to cut a circle from 1.8 – 17cm in diameter.

Leaves no trace of center pin mark. Perfect for making crafts, models and other light-duty jobs. Useful center gauge to assist in finding the center point. CE-700P (extension beam) for larger circles (from 16-40cm in diameter) is sold separately.

Product description

• Cuts Sharp Clean Circles Of Up To 9 inch Diameter
• Suitable For Paper, Photo, Card And Fabric Cutting
• Fixed Grip, Keep Steady Without Shaking, Ensures Accuracy
• Built-In Blade Cover And Plastic Pivot Spike Guard For Safety When Not In Use
• This Compass Cuter Is A Wonderful Tool For The Home Or Office, For Students And Teachers.

• Cuts Sharp Clean Circles Of Up To 9 inch Diameter
• Suitable For Paper, Photo, Card And Fabric Cutting
• Fixed Grip, Keep Steady Without Shaking, Ensures Accuracy
• Built-In Blade Cover And Plastic Pivot Spike Guard For Safety When Not In Use
• This Compass Cuter Is A Wonderful Tool For The Home Or Office, For Students And Teachers.

Product description

Included:

1 x Circular Paper Cutter Cut Circle



Features:

Lightweight and portable, convenient and easy to use.

It can be used for cutting printing paper, photo paper, composite Paper, kraft paper, special paper, optical film, etc.

Suitable for diy, office, handcraft, paper-cutting lover, kindergartens, schools, etc.



Notice:

Before use, please pad your countertop with a pad or hard object to avoid scratching the countertop.

Due to the light and screen difference, the item's color may be slightly different from the pictures.

Please allow 0.5-2cm differences due to manual measurement.

• Rotary paper cutter, lightweight and portable, convenient and easy to use.
• Rotary circle cutter adjustable can cuts circles from 3 inches to 13 inches in diameter.
• Paper cutter craft suitable for diy, office, handcraft, paper-cutting lover, kindergartens, schools, etc.
• Paper trimmer scrapbooking tool can be used for cutting printing paper, photo paper, composite paper, kraft paper, special paper, optical film, etc.
• Do your kids like to make diy greeting cards, invitations, postcards by themselves? our rotary paper cutter is an ideal paper trimmer scrapbooking tool.

User questions & answers

Question:	How does this cutter work
Answer:	Works well would like it to make smaller circles but it works well!
Question:	Will this cut felt
Answer:	Didn’t receive it yet, takes weeks to arrive
Question:	Where do you find replacement blades
Answer:	/Duration 0:21Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:21 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } We have shot a Circular Paper Cutter video for your reference. The replacement blade is in the storage box on the back. It has two.
Question:	What’s the smallest size circle this will make
Answer:	The smallest circle it makes is 3 inches across

Product description

• Cuts Sharp Clean Circles From 1.1" To 13.2" Diameter
• Suitable For Paper, Photo, Card, Leather, Vinyl, Rubber And Fabric Cutting
• Fixed Grip, Keep Steady Without Shaking, Ensures Accuracy
• Built-In Blade Cover And Plastic Pivot Spike Guard For Safety When Not In Use
• This Compass Cuter Is A Wonderful Tool For The Home Or Office, For Students And Teachers.

• Cuts Sharp Clean Circles From 1.1" To 13.2" Diameter
• Suitable For Paper, Photo, Card, Leather, Vinyl, Rubber And Fabric Cutting
• Fixed Grip, Keep Steady Without Shaking, Ensures Accuracy
• Built-In Blade Cover And Plastic Pivot Spike Guard For Safety When Not In Use
• This Compass Cuter Is A Wonderful Tool For The Home Or Office, For Students And Teachers.

User questions & answers

Question:	What size cutting wheel does it take
Answer:	I did and it works perfectly.. I’m very happy with your product !
Question:	What size rotary blades does it use
Answer:	I don't have this issue, as I am using an older model iPhone. There is also no issue with my android phone.

Product description

Stevsteve and Alma Mitchell founded American Crafts in 1994 with their son. They quickly built a general craft market company. American Crafts has since become known for its fresh and clean product design and friendly and attentive customer service. The products are characterized by bright and vibrant colors and a modern feel, and inspire them to record their memories in a fun, sophisticated and stylish way.

• uniquely compact
• easy to use for any paper project
• lock closed for stackable storage
• create a precise basic shape for your project
• Imported

User questions & answers

Question:	Will this cut card stock paper? I need to make about 500 hole punches so I'm not sure if it will last
Answer:	Should do just fine. I have cut various thicknesses of upholstery fabric using mine. Just remember after continuous cutting, turn the blade around. Change blades as necessary too.
Question:	Will this cut contact paper
Answer:	There will be a little indention or very small pin-size hole (nothing that I really notice). It will help you find your place again should you stop before the circle is actually cut.
Question:	How far will I be able to go from the edge to punch the circle. I need to go from the edge in about 1-2 inches. Will this work
Answer:	Of course, Olfa makes a replacement blade. It's my opinion that just about any 18 mm blade will work. Most of the rotary cutters all use the same diameter blade with the same diameter interior hole for mounting.Hope this helps.
Question:	i want to punch out photos. will i be able to see the photo that i am punching to make sure it is centered
Answer:	I just tested it on some 1/8" foam and 1/4" foam and it worked fine. Keep the blade sharp to prevent material from sliding and you should be fine, Just a heads up - this does not come with extra blades so you may want to consider ordering them at the same time.

Product description

Cut perfect circles for your artwork with this EK Tools rotary circle cutter. Use this compact cutter to make cut circles from 5 inches to 12 inches in diameter. Glide the blade shutter onto the channel and flip the Lock into a safe position to cut perfect circles for your DIY projects. This 9 inch x 3 inch craft circle cutter features an ultra-sharp blade to ensure precision.

• Rotary circle cutter
• Product is unique and carries its own natural characteristics
• 9 in x 3 in
• Cuts circles from 5 inches to 12 inches in diameter

User questions & answers

Question:	Where can I get replacement blades
Answer:	The back of the package says "18mm Round Blade"
Question:	Will it cut acrylic
Answer:	The back of the package says "18mm Round Blade."
Question:	will it cut wool felt 3mm thick
Answer:	It will cut paper I have not tried card stock and it comes with replacement blades.
Question:	Will this cutter cut multiple layers of frabic
Answer:	I don’t know, I looked at a video from Facebook on how to used it and just played around with it. Hope this is a little helpful for.

Product description

The Circle Cutter makes it easy to cut circles anywhere on your crafting material, perfect for creating windows on homemade cards, scrapbook pages and more. Cut circles from 1" to 8" with no preset increments. For exact placement, use the clear base and needle point feature. Additionally, it includes a gripper foot on the bottom to prevent slippage when you’re cutting.

• Ideal for cutting circles anywhere on the page, great for adding windows to homemade cards and scrapbook pages
• Cuts circles from 1" to 8" with no preset increments for crafting versatility
• Clear base and needle point feature make alignment easy, eliminating mistakes that waste craft materials
• Replacement blades available (item# 93827097)
• Lifetime warranty

User questions & answers

Question:	Will this work on the front of a greeting card? 3" Fiskars cuts beautiful circles but they are very near the edge. Help
Answer:	It will cut card stock, that is what I was cutting when I cut my circles. They turned out great. I would guess it would cut 500, don't know for sure though.
Question:	How do you use the circle cutter
Answer:	Yes, it will cut through, as long as you take into account: 1) You have to have the hand strength to compress the punch to cut through a thicker material. If you can't squeeze the punch hard enough, the blades can't do the work. 2) The blades will be initially sharp enough, but will dull a tiny bit with each use. To sharpen the blades, cut through a very fine sandpaper a few times. You will feel the difference. 3) If the contact paper has a sticky adhesive, it will get on the blades and you will need to stop and clean them. You could try one of the label removing solvents, like Glue Gone, on a cotton ball or rag.
Question:	Will this punch a single laminated sheet of copy paper
Answer:	The 1.25 circle punch punches 3/4 of an inch from the edge of the paper.
Question:	can this be used to cut felt circles
Answer:	Yes, you will. You will just have to turn the punch upside down to view them. The design of these punches makes it very easy to do.

Product features

About us

Established in 1649 as an ironworks in a small Finnish village of the same name, Fiskars has grown to become a global supplier of consumer products for the home, garden and outdoors. Fiskars products solve everyday problems, making daily home, garden and outdoor projects easier and more enjoyable through superior performance and design.

Product description

An inexpensive product to produce the perfect discs ideal for making clock dials.

Can fit a pencil lead for drawing or a knife blade for cutting.

Will cut or draw circles up to 150mm diameter.

Comes packaged on a blister card with 2 spare pencil leads and 6 cutting blades.

• An inexpensive product to produce the perfect discs ideal for making clock dials. Can fit a pencil lead for drawing or a knife blade for cutting.
• Will cut or draw circles up to 150mm diameter.
• Comes packaged on a blister card with 2 spare pencil leads and 6 cutting blades.
• the thickness of Blade is 0.5MM

User questions & answers

Question:	Does this tool make a hole in middle of circle
Answer:	I don't know I returned it because it was garbage
Question:	Can this be adjusted to cut any size? I need 1 5/8 inch circles
Answer:	It wouldn't even cut paper I returned it..
Question:	what is the smallest circle size this will cut
Answer:	I had trouble cutting card stock. The paper moves. I was not satisfied with this product.
Question:	Does it come with blades
Answer:	no it will not

Product description

Specification:

• Net Weight: 90 g
• Size: 220*70 mm
• Cutting Diameter: 10.3-33.5 mm
• Color: Green
• Material: Plastic

Package Includes:

• 1 * Circle Cutter

• Function - The circle cutter can be used to cut printing paper, photo paper, composite paper, kraft paper, etc.
• Reuse - The circle cutter is made of plastic material, which is very durable. The circle cutter can be reused.
• DIY Tools - The circle cutter is an essential DIY production tool. You can enjoy the fun of DIY in the production process.
• Easy to Carry - The circle cutter is very lightweight. The length is 220 mm. You can carry it wherever you go.
• Widely Used - The circle cutter is suitable for DIY, paper-cutting enthusiasts, kindergartens, schools and other fields.

User questions & answers

Question:	Does this item include any replacement blades
Answer:	No and it's not even great for cutting pictures

Product description

➤Product Information:

✿ Materials: ABS and Alloy

✿ Size: Craft hole punch--7*4*6cm/2.7*1.5*2.3inch

             The Round Shape--1 inch diameter

✿ Color: Random Color

✿ Package Includes: 1 piece Craft hole punch

➤Feature:

☛DIY Handmade Paper Punch: Can be use for decorate your scrapbooks, diary, photo album, envelope, good for making greeting cards, gift wrapping and many other paper handmade products 

☛Applicable Paper: Perfect for regular paper, EVA foam, foil, craft paper But not for cloth fabric, basically thickness less than 2MM.Please use 70G-230g paper jam. If your paper is too thin,please use 2-3 layers.do not use the Sticky paper to avoid make the punch Get stuck.

☛Wide Application: Perfect for Daily entertainment, Arts Fun Projects. Very popular among kids, children, teens and adults. It is a good tool to develop children's intelligence and imagination.

➤Note:

☛Suitable for children over 3 years old! Do not give it to children under 3 years old!

☛The actual color of the expanding file folder maybe slight different from the picture shown due to the different screen of display or reflecting light when shooting.

• ⭕ Multipurpose: Craft scrapbook punches set is suitable for DIY crafts, popular among kids, children, teens and adults, suitable for scrapbooks, cards, decorations, gift wrapping, envelopes, memory books, greeting cards, gift tags, birthday card and any paper craft.
• ⭕ Materials & Desgin: Paper Punch is made of ABS and alloy, which is strong and sturdy; spring-action lever design makes the craft circle punch easy; unique and novel design makes the punch looks more lovely. Children must like this hole punch. (Suitable for children over 3 years old)
• ⭕ Applicable Paper: Craft hole punchers are great tool set for paper artwork, perfectly shaped designs from card-stock, paper, cardboard, felt, thin foam and sponge paper. But not for cloth fabric and Sticky paper to avoid make the punch Get stuck.
• ⭕ Size Details: The size of Craft hole punchers is 7*4*6cm/2.7*1.5*2.3inch(LxWxH); The diameter of the printed round paper is 2.5cm/1inch.
• ☎ Customer Service: If you have any questions about the product or anything I can help you, please email us, we will reply you with 12 hours.

Product description

3 inch Circle Punch - Buytra Circle Paper Punchers for Kids Adults,  Scrapbook Paper Craft Punch for Card Making

Specifications:

Material: ABS shell and alloy blade

Size: the shape puncher approx 6.5 * 4.13 * 3.94"" and the cut-out is approx 3 inch(6.7-7.5cm)  

Color: the shell color of the punchers are sent randomly; the color may be different from the picture shown on website, thanks for your understanding

Package Contents: 1 Circle Paper Punch

Features:

The paper punch  works best on 70-250gsm cardstock paper or lower, or 1-1.7mm thick sponge paper. Not recommended for use multiple papers at a time or papers above 250gsm. A sheet of thin tissue paper may be not punched out well, otherwise folded several times.

Perfect for creating party decor, custom card making, scrapbooking, diary planner, memory books, journals, invitations decor, a great addition to paper craft projects

WARM TIP: NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OLD, OR PLEASE TO BE USED UNDER ADULTS DIRECT SUPERVISION

• MATERIAL & MEASUREMENTS - made out of ABS shell and alloy cutter; the craft punch measures approx 6.5 * 4.13 * 3.94" and the cut-out is approx 3 inch(6.7-7.5cm)
• EASY TO USE - spring-action lever design makes punching heavy paper more easier, just put a paper inside it, and take a little bit effort to the handle, then a cute and clean cut-out comes out
• FOR USE WITH 70-250gsm CARDSTOCK PAPER OR LOWER for Best results; OR FOR 1-1.7MM thick sponge paper; NOT RECOMMENDED for use paper above 250gsm or multiple sheets of papers at a time
• GREAT PAPER CRAFTING SUPPLIES - perfect for creating party decor, custom card making, scrapbooking, Photo Album, diary planner decor, a great addition to paper craft projects.You can easily add extra-large style and dimension to your papercrafting projects with the 3" Circle Lever Punch
• WHAT YOU GET - comes with a 3 inch circle punch; WARM TIP: the color of the paper punch will be sent at random, thanks for your understanding