12 best wire cars

• Soft bare 99.99% OFC Copper Red/Black bonded Zip Wire that pulls apart easily
• True 16 Gauge wire (2 conductors, 27 Strands per conductor. 0.25 mm diameter per strand)
• Automotive Grade "GPT" PVC insulation. Oil & gas resistant. Temperature Range: -40 deg F to +176 deg F
• Perfect for Radio, Home Theatre, Automotive, Stereo, Robotics and R/C applications
• Unmarked PVC walls for a clean sharp Red / Black look

User questions & answers

Question:	Will this work for led light pods
Answer:	Yes, it should work just fine unless the run is unusually long. 16 gauge copper wire has a resistance of about 4 ohms per 1000 feet. That means that a pair of wires would have a resistance of about 8 ohms per 1000 feet. If the run from your amplifier to the speakers is 100 feet the resistance would be about 0.8 ohms which would not be a problem. If the run is longer than 100 feet you might want to consider heavier wire.
Question:	Would this work for a 100w 2 channels boss amp
Answer:	NO. Any wire which is ran in the walls of your house must be CL2 or CL3 Rated. This basically means it will not produce noxious smoke fumes or excessive smoke during a fire.
Question:	Can i run this through my attic and walls for l.e.d. light strips? i live in south texas
Answer:	it's not one red and one black; it's lamp wire - with the 2 joined; so it's 100 ft of red/black wire;
Question:	Is there 100 feet of red and black, or 50 foot each to equal 100 feet total? Thanks for any info
Answer:	No they don’t weight that much. Maybe 5-10

• 14 Gauge CCA Copper Clad Aluminum | 7 Rolls | 50 ft per Color | Red White Blue Yellow Brown Green Purple
• Copper Clad Aluminum (0.2 mm dia/strand, 54 strands). Insulated in flexible PVC. Rated to 105 C
• For In-Cabin 12 V Automotive, Car Radio Audio Speaker, Home Theater, Trailer, low voltage LED light
• IMPORTANT: DO NOT use for building / household 110 / 220 V ac wiring. This is Not AWG
• For more wiring selections, visit WWW.AMAZON.COM/GSPOWER

User questions & answers

Question:	Do they burn up easily ? I need to use it for some distributor work
Answer:	the colors are fixed.
Question:	Can you pick the color, some of these colors I dont use
Answer:	The wire is strand copper but not tinned, I used heat shrink to seal all connections on my boat and haven't had any problems
Question:	Are these wire copper stranded tinned wires
Answer:	This should work for most 12 volt applications, especially LED lights because they don’t draw very much

Product description

***We are in the process of transitioning remote wires to our own brand. You may receive wires with the Best Connections label. *** 18 Gauge, 100' FT Remote Wire 6 Rolls, 100' FT Each Roll One Roll each of Red, Black, Blue, Yellow, Green and White Single Conductor, Remote, Turn on, Hook Up Wire Stranded Copper Clad Aluminum Flexible, Insulated, and Jacketed in PVC Perfect for Car Audio, Home Theatre, Automotive Use this with any 12 Volt or home project Rated 158 degrees Fahrenheit (6 to 80 Volts) THIS IS NOT AWG AMERICAN WIRE GAUGE ADVANTAGE OF CCA (COPPER CLAD ALUMINUM) – Here are the facts about CCA vs Oxygen Free Copper. CCA wire offers the same signal frequency and reliability in terms of corrosion resistance to copper wire. The advantage of the CCA speaker wire is lighter and more flexible than copper wire. The cost of CCA vs Oxygen free copper is much lower and you can enjoy the same functions and reliability as copper wire without paying the extra cost for the installation. The cable is made of CCA Copper Clad Aluminum, ensuring high fidelity sound quality and providing maximum's conductivity and durability without paying the additional cost. The product go through many states of testing to ensure the highest performance and reliability of the products. Click here for more available information regarding wire specs

User questions & answers

Question:	Is this stranded or solid wire
Answer:	I could not answer that question, I utilized the wires for wiring trailers.

• 25 ft Red & 25 ft Black 16 AWG Stranded Copper Clad Aluminum Wire
• True 16 American Wire Gauge AWG. 42 strands with 0.2 mm diameter per strand
• Perfect for Car Audio Radio, Home Theater, 12V Automotive, signal turn on, boat, low voltage LED light (6 to 80 volts)
• IMPORTANT: DO NOT use for building/household 110/220 V ac wiring
• Visit WWW.AMAZON.COM/GSPOWER for all you wiring needs

User questions & answers

Question:	trying to do a potato and lightbulb electric experiment with kids do you recommend 14, 16, or
Answer:	Yes, there is a color code in wiring. in automotive wiring red is used for the positive and black for the negative.
Question:	Are the red and black wire the same? Could they he used interchangeably
Answer:	Are you meaning the type that tap off the fuse itself or cutting a 12awg wire and putting in a fuse holder with 14awg wire? If it's the 1st yes if its the 2nd I wouldn't or you would be restricting the current, they used 12 awg for a reason. You can make your own fuse holder with a couple .250 female disconnects for 12awg and a reg blade type fuse.
Question:	Can i connect a 14 awg fuse adaptor cable to a 12 awg cable in my car
Answer:	Prophet Google has said: https://www.smlease.com/entries/finish-operations/galvanic-corrosion/ http://www.designbyinitiative.com/files/8514/2711/8760/Galvanic_Table.pdf
Question:	How is Galvanic corrosion prevented at the copper-aluminum interface
Answer:	Stranded

Product description

Product Includes: 60 X T-Tap Wire Terminals (Red:20piece, Blue:20piece, Yellow:20piece ) Red: AWG 22-18; Wire range: 0.5-1.0mm; Blue: AWG 18-14; Wire range: 0.75-2.5mm; Yellow: AWG 12-10; Wire range: 4.0mm; 60 X Male Spade Connector (Red:20piece, Blue:20piece, Yellow:20piece ) Red: AWG 22-18; Wire range: 0.5-1.0mm; Blue: AWG 18-14; Wire range: 0.75-2.5mm; Yellow: AWG 12-10; Wire range: 4.0mm; Material: Copper + Nylon Max Ambient Temperature: 106℃.

• Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job
• Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece; Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it
• Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently
• Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire
• Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out

User questions & answers

Question:	Can this be removed or once you put it on it has to stay
Answer:	You can take the clips off but they leave a small cut in the insulation of the wire but the pigtail wire can be easily removed and replaced
Question:	Can this be used to tap 7 lunes to one live load line? Don’t ask why; electrician is an idiot
Answer:	Yes, if there is room for that many on the line. And either the line being tapped should be fused for the total load of all lines, or each individual line should be properly fused for its load.
Question:	Will the large 12 gauge yellow ones work for an outdoor landscape "thicker insulation" burial wire gauge 14 or 16 ? Anyone tried this with success
Answer:	Why would you use these on landscape wiring?? They are not good to use in wet locations. You can either strip the wire back a little fi=urther so the insulation stops at the connector, or you can slightly shave down the insulation to make it thinner so it slides partially into the end of the connector.
Question:	I see some say these are fuse holders. What is it, fuse holder or wire connectors
Answer:	I purchased the Nilight N1-FH01 inline fuse holders. This 120 pc item is not fuse holders. It's possible reviews for all Nilight items are being mixed together and posted with each item.

Product features

Specifications

Quick Splice Connector:

Red | 22-18 Gauge - Wire range (0.5-1.0mm²).

Blue |16-14 Gauge - Wire range (0.75-2.5mm²).

Yellow |12-10 Gauge - Wire range (0.5-1.0mm²).

Nylon Fully Insulated Male Spade terminals:

Red | 22-18 Gauge Wire range: 0.5-1.5mm² (Max current 10A).

Blue |16-14 Gauge Wire range: 1.5-2.5mm² (Max current 15A).

Yellow | 12-10 Gauge Wire range: 4-6mm² (Max current 24A).

Easy Identification

Color-coded tubing makes it easy to identify the right size of the connector for every application.Red: AWG 22-18; Blue: AWG 18-14; Yellow: AWG 12-10.

Safety and reliable

These Self-Stripping Electrical T-Tap Spade Connectors combo makes tapping into an existing wire quick, easy, and reliable, no wire stripping needed.

High Quality

The cores are made of true tinned copper for maximum conductivity and the strongest crimps. It prevents the wire from shorting out efficiently.

• Size: 19 x 14 mm; Applicable cable diameter: 0 - 5 mm (0 - 0.2 inch)
• Come with 100 pieces in total, strong adhesive make it grip firmly
• Self-adhesive, easy to use, creative approach is available as you like to utilize them
• Cable organization: cable clip organizer attaches to a smooth surface firmly and help keep your place neat and organized, free from annoyance of mess wires, clean and tidy environment makes you at ease
• Suitable for cars, house and office, can be applied to various cables such as computer cables, TV cables, Christmas lights cable, USB cables and so on

User questions & answers

Question:	Would these work for Christmas lights
Answer:	No its listed as 100 peices so you're gonna get 100 peices.
Question:	Does this come in a package of less than 100? I only need a few, 3 or 4 at most
Answer:	Hi, this is according to your cable diameter. The applicable cable diameter is 0 - 5 mm (0 - 0.2 inch) for this cable clip. Thanks.
Question:	How many cables can i fit in this
Answer:	I have stuck it to the wall and desk. I did not clean the desk with alcohol and they are coming off. I did not clean the wall, but fresh paint, and they are still sticking. So, the answer would be yes.
Question:	Does it stick to the wall
Answer:	14 should be fine for what your doing

• 50 ft of High Density Polyethylene with 1/4 in diameter
• Ideal for Automotive, Marine, Industrial, Office and Home
• Flexible Ribbed Tube Design for clean and easy install
• Oil, Gasoline and abrasion resistant
• Operating temperature: -40F to 200F

User questions & answers

Question:	Will the ban on shipping some items affect this item due to the covid
Answer:	There is no “made in ....” on anything. However all instructions and labels are only in English. FYI. They work well on our utvs/atvs.
Question:	Where is this manufacturered
Answer:	No, this is not rodent resistant.
Question:	Is this rodant resistant
Answer:	Only had it on mine for about 6 weeks
Question:	Is it UV resistant
Answer:	they will work with any type of small diameter wire, as long as there is a smooth, clean surface to stick to

• 100-FEET (30.5m) [FROSTED BLUE/BLACK 14 GAUGE SPEAKER WIRE ] - The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow.
• COPPER CLAD ALUMINUM (CCA) - CCA wiring provides a good conductor for transmitting audio. This is the most economical option when choosing speaker wire.
• RUGGED PVC JACKET - Allows free, wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance.
• EASY POLARITY IDENTIFICATION - This two color jacket allows for easy polarity identification. Making a polarity mistake could be damaging to your audio equipment.
• SOFT TOUCH JACKET - The jacket on our cable is designed with the installer in mind. The flexibility of this jacket allows for easy routing and has a low memory.

User questions & answers

Question:	Can this wire be used for in ceiling speakers
Answer:	it is regular speaker wire. i installed in wall speaker with it, which is similar. You will need to check with your local building codes on the installation. some places require all wiring to be stapled if it will impede with your travel in the attic. if you overhang some of them, you will not need to staple.
Question:	Can it handel 1000watt surround sound system
Answer:	I have it connected to a new Sony Home Theater 750 Watt System and I love the sound. My best guess is yes.
Question:	Is this thin enough to run through a drop ceiling to not effect the tiles? Want to use to run rear surround speakers
Answer:	Not exactly sure what you mean by "through a drop ceiling to not effect the tiles". If you mean without having to cut a notch in the tile, or tile framework, for the wire to run thorough--maybe. The wire dimensions are roughly 1/8" (3.175mm) by 1/4" (6.35mm), so it depends on the amount of play you have between your tiles and their framework, or the frame work and your wall depending on how you intend to route the wires. Good luck! BTW: It is more flexible than a 100% copper wire of equal gage.
Question:	Is this wire good for outdoor speakers
Answer:	Seems to me the jacket is sufficient enough to protect the wire outdoors, but you'd certainly have to take extra measures to protect the connections.

Product features

100ft of 14 Gauge Speaker Wire

• 100 feet (30.5m)
• True Spec Stranded Wire
• Rugged Blue/Black Frosted PVC Jacket
• Two Color Jacket for Easy Polarity Identification
• Copper Clad Aluminum Conductor (CCA)
• Compact Spool for Easy Storage

Perfect for Car Audio Systems

• Rugged PVC Jacket Makes it Easy to Route through Car Panels
• Easily Installs into Most Crimp Terminals
• Jacket Strips Easily for a Quick Install

Great for Home Theater Systems

• Low Memory Jacket Makes it Easy to Route Close to Wall Moldings
• Easily Installs into Most Banana Plugs
• Jacket Strips Easily for a Quick Install

Product description

- Ultra Flexible, Low Resistance, Strand Wire,High Performance Pure Silicone Wire



- High-quality tinned copper inner core, can maintained copper wire for a long time does not oxidize .protecting them from corrosion and making it easier to solder.



- Insulating silicon rubber, color: white, red, black, blue, green, yellow,



- Scope: Applicable to all kinds of electrical and electronic, industrial electronics, model aircraft, Cars, ship model, batteries, motors and other links insulation. electronic ceramics,heating parts,car lighting,ballast etc.



Nominal Voltage: 600V

Testing Voltage:2000V

Temperature Range:-60 Deg C to 200 Deg C

Conductor: Tinned Copper

OD Tolerance: ±0.1mm

Insulator: Silicone



Conductor：

Gauge:18AWG

Copper Number/Wire Diameter:150/0.08mm

Diameter: ∮1.19mm



Insulator:

Jacket Thick:0.55mm

Over Diameter:2.3mm

Bear Current:7.5A

• Due to the Silicone insulation and fine stranded core, The wire is very flexible easy to strip and solders . Well suited for applications where the wire will be flexed, like test cables. Could be terminated with pins and heat shrink sleeves for breadboard jumper wires.
• 18 Gauge silicone wire - super flexible 150 strands of 0.08 mm Tinned copper wire - protecting them from corrosion and making it easier to solder.Highly efficient - Super low impedance .
• High Temperature Resistant Silicone Wire.Temp: -60 degree celsius +200 degree celsius ,Low temperature resistance,in extreme cold -60 degree celsius
• Conductor: High-purity oxygen-free Tinned Copper,Nominal Voltage 600V；Bear Current 7.5A
• (6 different colored 4 Meters /13.2 Feet spools) colors:red,yellow,white,green,blue,black

User questions & answers

Question:	Can these be used to solder together led light strips for under kitchen cabinets
Answer:	Yes but the wires as a group need to be coved. What you normal looking for is a 120v 15 amp wire for internal wiring. So if the wire is inside tha appliance you should be ok.
Question:	Will this wire work for repairing internal appliance wiring
Answer:	In a nutshell, no. This is single conductor wire. I suppose you could make a parallel run, using 2 wires, but it would be simpler to simply buy "speaker wire" in the first place.
Question:	Will this work as speaker wire
Answer:	Go back and look at the Amazon page for this, It has multiple options to choose from. From 18 to 30 gauge wire, and 2 different heat shrinks 2:1 and 3:1. So depending on what you wan, you have 8 choices. Click on 2:1 heat shrink and that is what you are buying. I agree, when I read a review I want it for a specific product, Not several different products. But this Amazon page lets you choose which item you want to buy and then the reviews are all thrown into the same pot.
Question:	Why are some reviews talking about wire? Is this for heat shrink tubing or wire? Or has amazon got their reviews all messed up again
Answer:	No

• 16 gauge wire - in 6 Bright colors rolls of 100ft 16 gauge auto wire
• 16 gauge auto wire single conductor, remote, turn on, hook up wire, stranded copper clad aluminum 16 gauge wire
• Flexible 16 gauge auto wire, insulated 16 gauge wire, and jacketed in PVC; Rated 158 degrees Fahrenheit (6 to 80 Volts)
• 16 Gauge auto wire perfect for car audio, home theatre, automotive; Use this 16 gauge wire with any 12 Volt or home project
• THIS IS NOT AMERICAN 16 AWG WIRE, IT’S HIGH QUALITY 16 GAUGE AUTO WIRE FOR A GREAT PRICE!

User questions & answers

Question:	What company are you using for shipping because i was supposed to get this order yesterday and it never showed up
Answer:	It would be fine for trailer lights. They are low voltage. This wire is great for any automotive wiring - 12-24v.
Question:	Is this wire good for wiring trailer lights
Answer:	no
Question:	Can you order specific colors or is it random
Answer:	This is 16 gauge wire. Same stuff I’ve been using for years. Great quality wire and sheathing. Currently using in my Sprinter van conversion.
Question:	If this is not american wire gauge (awg), what wire gauge standard is it? what is the conductor diameter or this "16 gauge" wire
Answer:	While this wire will technically ‘work’, there are better products that I have used that are better suited for this purpose. Stranded wire is all I use for my strip lights. It is more flexible and easy to work with. This wire is also available in stranded and will work just fine. If you want something that would be better, RGBZONE has ribbon cable that makes it SO much easier, and it looks more professional. I’m not sure how many wires you need, but the product in the link below comes in 3 or 4-wire strips. They also have several other products that might be handy for your installation (right angle connectors etc). I don’t work for or receive any benefit by recommending this vendor, I’ve just had great experience with them and their products are of good quality. RGBZONE 10M 22AWG 3pin Extension Cable Line Wire for WS2812B WS2811 Dream color LED Strip Lights https://www.amazon.com/dp/B06Y4716V7/ref=cm_sw_r_oth_tai_xrCnEb3RWVXHC

Product description

10 feet #14 AWG

High Temperature Resistant

2-Conductor Silicone Insulated.

Very Flexible for easy lay-out.

Tin coated copper will not corrode



Specifications:

Length: 10 feet

Gauge: 14 AWG

Rated Voltage: 6 - 24 volts

Insulation Material: SILICONE

Core Material: Tin-coated copper



Great for, off-road vehicles, racing applications, construction vehicles, farm vehicles, marine applications. Manufactured in China to OZ-USA's high end specifications. USA Shipping (California), USA Warranty: 1 year.

• 10 feet #14 AWG
• High Temperature Resistant
• 2-Conductor Silicone Insulated.
• Very Flexible for easy lay-out.
• Tin coated copper will not corrode

User questions & answers

Question:	Is the wire harness recieved the same as picture? Encapsled is a must for water proofing
Answer:	It's close to 5/16 diameter
Question:	What is the overall diameter of the cable
Answer:	Unfortunately, all our wires are already pre-cut for retail distribution.
Question:	Can you sell this by the roll to me
Answer:	Don’t use on trac they are bad

• 16 Gauge stranded copper coated aluminum CCA Red/Black Zip Wire. 100 FT Red / 100 FT Black
• Automotive Grade "GPT" PVC insulation. Oil & gas resistant. Temperature Range: -40 deg F to +176 deg F
• Perfect for Radio, Home Theatre, Automotive, Stereo, Robotics and R/C applications
• Designed to meet UL VW-1 Vertical Wire Flame Test, RoHS compliant

User questions & answers

Question:	can this be used on a motorcycle for speaker wire
Answer:	si es resistente superan el espesor que traen la mayoria de vehiculos de fabrica, es resistente.
Question:	Sirve para cable principal para unas luces de carro
Answer:	What I recieved was not the same as pictured. What I recieved was a red and black wire in a thin jacket sleeve, not embeded in the black coating as shown in the photo. I was very disapointed in the producti recieved and sent it back. I ended up purchasing from superbrightleds.com and got the quality wire I wanted for the same price.