13 best car audio wire connectors

• Assortment Kit:1500PCS Wire Terminals - rings, butts, male and female spades and forks terminal connectors
• Material:Industrial Graded High Quality Copper + PVC + Tinplate; ensure excellent safely wire contact for vehicle, household and electrical use
• Wire Range:All terminals are color coded by wire range for easy wire identification. Red: AWG 22-16 (740pcs), Blue: AWG 16-14 (610pcs), Yellow:AWG 12-10 (150pcs)
• Wide Applications:An assorted box which contains the most popular wire terminal connectors. A handy assortment of terminals connectors comes with all you need to make quick solderless electrical repairs around home, garage, workshop or outside
• Easy To Carry&Identification:Neatly organized in a reusable divided PVC case,with three different colors (red, blue, yellow) as well as a detailed chart for easy identification or for different purposes of use

Product features

Flytuo 1500PCS Electrical Wire Terminal Crimp Connectors

Easy To Use:

Step1:Prepare the wire which stripped jacket and electrical connectors.

Step2:Place the terminal in the proper crimping chamber.

Step3:Hold the terminal in position, squeeze the tool handles until sufficiently to hold the terminal.

Step4:Finish.

Note: For best results, please use profession crimping tool

PVC(NYLON)+COPPER+TINPLATE

PVC&COPPER material have good insulativity and excellent flame retardancy.

Thick insulation protection outside,waterproof and fireproof.

Thicker copper barrel ensures super electrical conductivity and also prevents breakage during use.

Total 1500PCS Electrical Wire Terminal Crimp Connectors

• ✔ Ideal for Connecting 2 or More Wires: closed end crimp on wire connectors are used to safely secure electrical connection points
• ✔ High Quality Material: Conductor: Copper Tubular T2/C11000, Tin-plated, Insulation: Nylon
• Durable Nylon Cover: corrosion and chemical resistant. Will protect your connections against vibration
• Size: 22-16 AWG, 100 pcs; UL Approved
• Easy to use crimp caps: Twist the wires together, insert into the pigtail connector, and make a crimp.

User questions & answers

Question:	Are these rated for 600 volts
Answer:	Nylon, according to Gardner Bender, is rated for 300v. Vinyl would be for 600v.
Question:	I need to join 2x 14 guage wires together, with a 1 in (25.5mm) long connector, which size is correct
Answer:	Dear, the 16-14 AWG closed end connector is suitable for 2x 14 guage wires together. But I can't understand "with a 1 in (25.5mm) long connector" means. Could you please contact us by email or message for further information. Many thanks!
Question:	wiring a house outlet will these caps work
Answer:	These caps use nylon, which according to Gardner Bender is rated for 300v. Therefore I think these caps are for low voltage applications and not house line voltage which should require vinyl?
Question:	Can these be used to install a car radio
Answer:	Yes, they are called crimp caps, they need a crimper to crimp them. Car Radios have the right gauge of wire for these crimp caps.

Product features

Size of the crimp caps nylon connectors:

The Description of Closed End Crimp Connectors:

Conductor: Copper Tubular T2/C11000

Insulation: Nylon

Finished: Tin-plated

Standard: ROHS3

Heat Resistant: -40 - 105℃

Easy-entry insulation for easy cable insertion

Closed end splice to accept a combination of solid and stranded wires for single and multiple applications

According to UL486, IEC60998 requirements

Strip two wires and then insert them into the a closed end connector.

Crimp the end connector with pliers.

Connection between wires and connector is done.

• ✔️TAP INTO ANY WIRE WITH EASE - TICONN Self Stripping Electrical T Tap Connectors will tap into any wire without needing to cut, strip or solder. Mid span wiretapping has never been easier before
• ✔️PREMIUM QUALITY - Thicker tinned copper contacts will not bend even when tapping into thicker wires; Quick splice T Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire
• ✔️DURABILITY - Each terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. High-temperature resistance up to 221degree Fahrenheit
• ✔️WIDE APPLICATIONS - 120 PCS T-Tap Wire Connectors + 120 PCS Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it. TICONN T TAP connector kit will allow you to quickly tap into any wire in any application. The connector assortment includes red (AWG 22 – 18), blue (AWG 16 – 14) and yellow (AWG 12) T-TAP connectors that can be used on wire AWG from 22 to 12
• ✔️TICONN BRAND QUALITY COMMITMENT - We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 24-month warranty. 100% Satisfaction Guarantee for risk-free shopping!

User questions & answers

Question:	Is this approved for commercial use
Answer:	They're low voltage, and I would not use them commercially.
Question:	Is this good for music system setup in a car
Answer:	I am not a professional electrician. As long as you use the correct gauge for the amps that is required for these connectors then yes. I will be using the product specifically for lighting LED's.
Question:	Does it come with storage box
Answer:	It comes as pictured,in a plastic divided carrier.
Question:	Will the large 12 gauge yellow ones work for an outdoor landscape "thicker insulation" burial wire gauge 14 or 16 ? Anyone tried this with success
Answer:	Haven't tried this but it seems you should use a connection that is an exact fit for the wire application

Product features

Quick Connections

Auto

Audio

Motor

• ✔️ EASY AND FAST PROCESS: All-in-one step solder and seal process. No need for crimp tools and soldering machine. Timer and mess saver
• ✔️ WATERPROOF AND INSULATION: Dual-walled design - Outside Polyolefin tubing provides insulation and improves pullout strength; Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal
• ✔️ STAY ORGANIZED: Our connectors come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application. The connector assortment includes white (AWG 26 – 24), red (AWG 22 – 18), blue (AWG 16 – 14) and yellow (AWG 12 – 10) solder seal connectors that can be used on wire AWG from 26 to 10.
• ✔️ WIDE APPLICATIONS: Shrinking ratio: 2:1. Ideal used for Automotive, Boat, Marine and other Outdoor Applications
• ✔️ TICONN BRAND QUALITY COMMITMENT – We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!

User questions & answers

Question:	What is the voltage rating on heat shrink
Answer:	I don’t know the exact rating but it is made for low-voltage like 12 V or 24 V connections. Not 120 V use.
Question:	Will these work for RC cars. For the battery , motor and electronic speed control
Answer:	i do not see why they would not so long as you have the right size for the wire diameter and enough room to heat them without effecting other parts of the RC car.
Question:	Do you have to ceimp the connector or is it just heat shink and its done
Answer:	Just heat up. That's it
Question:	Why cannot we get a mutikit with bloody 8 awg butt solder joins? why such an issue
Answer:	I would guess that they do not have enough solder, in the joiner, to be effective. Or there is not much call for that gauge wire, they can not be all things to all people. For that, strip the wires, place some shrink tubing on one of the wires, solder, let it cool, slide the shrink tube over, shrink it. Some times, when there is sufficient wire length, I place two different size shrink tube,. shrinking the smaller one first, letting it cool. The slide the larger one over the other.

Product features

Evenly Shrinking

Evenly Shrink when heated, no deformation or burn.

Waterproof

2 ends completed sealed after shrinking, waterproof.

Heat with a Heat Gun

Please heat with air heat and avoid using lighter for any flame.

• 100-FEET (30.5m) [FROSTED BLUE/BLACK 14 GAUGE SPEAKER WIRE ] - The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow.
• COPPER CLAD ALUMINUM (CCA) - CCA wiring provides a good conductor for transmitting audio. This is the most economical option when choosing speaker wire.
• RUGGED PVC JACKET - Allows free, wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance.
• EASY POLARITY IDENTIFICATION - This two color jacket allows for easy polarity identification. Making a polarity mistake could be damaging to your audio equipment.
• SOFT TOUCH JACKET - The jacket on our cable is designed with the installer in mind. The flexibility of this jacket allows for easy routing and has a low memory.

User questions & answers

Question:	Can this wire be used for in ceiling speakers
Answer:	it is regular speaker wire. i installed in wall speaker with it, which is similar. You will need to check with your local building codes on the installation. some places require all wiring to be stapled if it will impede with your travel in the attic. if you overhang some of them, you will not need to staple.
Question:	Can it handel 1000watt surround sound system
Answer:	I have it connected to a new Sony Home Theater 750 Watt System and I love the sound. My best guess is yes.
Question:	Is this thin enough to run through a drop ceiling to not effect the tiles? Want to use to run rear surround speakers
Answer:	Not exactly sure what you mean by "through a drop ceiling to not effect the tiles". If you mean without having to cut a notch in the tile, or tile framework, for the wire to run thorough--maybe. The wire dimensions are roughly 1/8" (3.175mm) by 1/4" (6.35mm), so it depends on the amount of play you have between your tiles and their framework, or the frame work and your wall depending on how you intend to route the wires. Good luck! BTW: It is more flexible than a 100% copper wire of equal gage.
Question:	Is this wire good for outdoor speakers
Answer:	Seems to me the jacket is sufficient enough to protect the wire outdoors, but you'd certainly have to take extra measures to protect the connections.

Product features

100ft of 14 Gauge Speaker Wire

• 100 feet (30.5m)
• True Spec Stranded Wire
• Rugged Blue/Black Frosted PVC Jacket
• Two Color Jacket for Easy Polarity Identification
• Copper Clad Aluminum Conductor (CCA)
• Compact Spool for Easy Storage

Perfect for Car Audio Systems

• Rugged PVC Jacket Makes it Easy to Route through Car Panels
• Easily Installs into Most Crimp Terminals
• Jacket Strips Easily for a Quick Install

Great for Home Theater Systems

• Low Memory Jacket Makes it Easy to Route Close to Wall Moldings
• Easily Installs into Most Banana Plugs
• Jacket Strips Easily for a Quick Install

User questions & answers

Question:	Do these have a temperature rating? Would they be suitable for use under higher heat applications. I want to use these under the hood of a car
Answer:	Yes good for under hood aplocations use the extensively for automotive repairs with no issues.
Question:	Are these connectors UL listed
Answer:	What is UL certified mean?-UL Certified. A certificate, issued to a manufacturer for one of its products, which indicates that the product has been tested in the US by the Underwriters Laboratories, Inc. (UL) and has met UL requirements. What you should know about UL certification?-UL Certification means that a product has undergone rigorous testing to ensure its safety standards are up-to-date. UL provides a number of services for a business—including validating, testing, inspecting, auditing, and certifying products and various businesses around the world. What is the cost to be UL Certified?-The fee, paid to UL, is often in the range between US$5,000 to 15,000. Then again, this is for he services provided by UL, and not including product development costs. China Imports -UL (Underwriter Laboratories) develops electronics safety standards for the United States, and provide related testing, certification and auditing services.- Unlike the EU, where importers must comply with a set of harmonized electronics safety standards – American electronics importers are free to choose which standards to comply with.-UL standards are developed for specific electronic products, or components, such as cords, batteries and plugs.
Question:	Can you use these for speaker wires? Thanks
Answer:	Dear Customer Yes, you can use it for the connection of speaker wires when the wire size is suitable. In other words, if the size of your speaker wire is (A.W.G.:26-10), then you can use our wire connectors to connect the speaker wire. Please note that our connectors are heat shrink wire connectors, NO NEED TO CRIMP for it and it can not be crimped, just heat shrink it via heat gun and then you can finish your project. Thank you Kuject customer service team
Question:	are wire connectors the same thing as butt connectors
Answer:	Dear Customer,  These are solder seal wire connectors, rather than butt connectors. This is the heat shrink butt connector here: https://www.amazon.com/dp/B07B518GCJ. You can check they are difference via the link above. For let you know their difference eaiser, we compare these two kinds of connectors from 4 aspects as follow:  1. Simplicity of Operation. For joining the wire with heat shirnk butts, you need a heat gun and plier, but for the solder seal coneecotrs, you just need a heat gun, as there is no need to crimp. So, the solder seal connector will be easier to use.  2. Waterproof Resistance. Both of them are waterproof, but there are two hot melt waterproof adhesive rings in the solder seal connectors, which will make it get a better waterproof and seal performance.  3. Flexibility of Use in The Confined Space. The solder seal connectors can be bent after connection and just need a heat gun to control the temperature to finish the joint, so it is more flexable and eaier when joining wire in the confined space.  4. Price. On Kuject, 210Pcs heat shrink butts is $19.99 ($1 for 10 piece) , and 120Pcs solder seal wire connectors is $16.99($1.42 for 10 piece) . The price is cheaper for every piece of the heat shrink butt connectors.  In conclusion, the solder seal connectors have a better performance than the heat shrink butts although it is a little expensive. So, we will recommend to use the solder seal connectors in most case, but it still depend on your needs. Besides, there are two kinds of butt connectors in the market: crimp butt connector & heat shrink butt connector. Maybe you refer to the crimp butts, so we also talk about the crimp butt connector here. The appearance of crimp butt is almost same as the heat shrink butt, but the tube outside of crimp butt connector is made by nylon, so they can not be heat shrinked and not waterproof, which can not be used outdoor or humid area, just only can use indoor and dry space.  These are the introduction of the three type of connectors above, hope our answer help you. Best wishes,  Kuject customer serivce team
Question:	How many wires can I fit on one connector? I think I’ll be using 14 gauge
Answer:	At least (2) will fit into the largest of the (3) size connectors in this kit. (3) 14 gauge wires might not.
Question:	Can I use the largest size to crimp 3 14 gauge stranded wires together
Answer:	Sure could. These are the fastest and the slickest crimp I've seen yet.
Question:	Are these heat shrink nut
Answer:	No they are not heatshrink! They are crimp pieces.
Question:	Is the metal copper or aluminum
Answer:	It is aluminum. Hope this helps. :)

Product features

Specification:

Shrinkage ratio is 2:1

Temperature that start to shrink: 80℃

Temperature that solder ring start to melt: 111˚C

Temperature that solder ring melt completely：138˚C

Note: It means the temperature of surface of the connector, rather than the temperature that the hot air gun should set.

Package Include:

1.30 x White Connectors: Diameter 1.7 mm, able cross-section 0.25-0.34 mm² (A.W.G.:26-24);

2.40 x Red Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm² (A.W.G.:22-18);

3.40 x Blue Connectors: Diameter 4.5 mm, Cable cross-section 1.5-2.5 mm²(A.W.G.:16-14);

4.10 x Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm²(A.W.G.:12-10).

Upgrade Overheat Resistant Material of The Shrink Wrap Tube

It is hard for beginners to control the heat shrink temperature when first to try these heat shrink wire connectors. Sometime, exorbitant temperature make the wrap tube melt but the solder ring still not melt, which result in failing to connect the wire. So, Kuject upgrade and use special material in the transparent tube, which can prevent the tube melt when it increase to a high temperature in a short time.

Solderless & Crimpless - Save Much Of Your Time

Compared to the crimp heat shrink butt connectors, you don't need to use the crimper to crimp the item when using the solder seal wire connectors, save one step to do it. And compare to the old way use solder and heat shrink tubing, you don't need to use the solder iron to solder the wire, also save one step for soldering. So, the solder seal wire connector is solderless & crimpless, which can save much of your time when you are using it for your project. Besides, you can also use them in hard to reach or limited space environments easily.

Step 1

Thread the connector to one of the wires and then twist the two conductor together.

Tips: Please make sure the end of the wire that you strip out is nice and clean (shiny).

Step 2

Move the connector to the middle of the conductor.

Tips: Make sure you strip out the end of the wire long enough for them to overlap one another and stay in the area of the solder sleeve.

Step 3

Apply heat to the connector slowly and evenly with a heat gun with reflector nozzle until it melt with the wire.

Tips: Some of our customers can use lighter to finish the joint, but we strongly recommend to use a heat gun with REFLECTOR NOZZLE to heat shrink the connector, especially for beginners.

Finished Item Display

Note: In some case, a solder ring mark will be left after the tin ring was melt, but it doesn't mean the tin ring is not melted and it fails. As long as there are enough tin melt with the copper then it will hold up strongly, it is unnecessary to pursue 100% meltdown of the solder ring. You can stretch it to test after the connector cool down.

Product description

Specifications:

The 2-way power distribution block allows you to connect as many as three amplifiers to a single power source. The main input lets you connect 4 or 1/0 Gauge wire from your battery to the block, and you can run up to three 4-Gauge or 8-Gauge wires to your amplifiers.



Features:

Type: 1 Way In 2 Ways Out power Distribution block

Distribution Block Weight:90g

Size:45 x 40 x 28mm/1.77" x 1.57" x 1.1''" (L*W*H)

Screw-down Wire Clamps

Input: 0GA/2GA/4GA Gauge Wire

Outputs: 4GA/8GA/10GA Gauge Wire

Impact Resistant Snap-on Plastic Cover

Platinum-Plated for Corrosion Resistance

Offers complete protection for your car audio system



Note:

For your vehicle’s protection, it is better to put an inline fuse holder between the distribution block and your vehicle’s battery.It can also be used to combine the ground wires of multiple amplifiers to a single grounding point.



Package included:

1 x 2 Way Car Power Distributor Block Holder

• Power/Ground Distribution Block
• 1-0/2/4 Gauge AWG In,2-4/8/10 Gauge AWG Out
• Made of High Performance Copper
• DuHigh Temperature Base,High Strength Nonperishable Industrial-grade Plastic Cover
• Suitable for auto car,RV,ATV,boat or other vehicles, protect your vehicle's audio amplifier system

User questions & answers

Question:	Can I use this for a battery and starter
Answer:	Yes
Question:	How much currentthis thing handle
Answer:	I used it on 12v, works good for me. No trouble so far.
Question:	Is this UL rated
Answer:	No idea. Alls it is is a metal block with Allen key screws. Plastic case. Nothing more.
Question:	Can i use it in reverse. 4 in 1 out : to connect 4 solar panels into a controller
Answer:	I don't see why it would not work. Only thing is the mounting holes are close to contacts.

• 【PREMIUM QUALITY】: Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for
• 【DURABILITY】: Each butt, ring and fork terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one seamless piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector
• 【WATERPROOF】: Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360-degree secure seal. It's flame-retardant, waterproof, and can be used underground
• 【WIDE APPLICATIONS】: Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly
• 【TICONN BRAND QUALITY COMMITMENT】: We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction for risk-free shopping!

Product features

Evenly Shrinking

Evenly Shrink when heated, no deformation or burn.

Waterproof

2 ends completed sealed after shrinking, waterproof.

Thickened Tinned Copper

Thickened copper layer, better conductivity and shape.

Interior Structure

Delicate interior structure.

• ✅ COPPER+ Vinyl (PVC) + Tinplate: Vinyl-insulated barrel ensure excellent wire contact.
• ✅ EASY IDENTIFICATION: With three different colors (red, blue, yellow) as well as a detailed chart for easy identification or for different purposes of use.
• ✅ WIDE USE: Butt, Ring, Spade, Quick disconnect are included in this multi application set. Electrical crimp connectors for household, vehicle and more. Here you will find the right connectors for all your electrical wiring projects.
• ✅ LIFETIME GUARANTEE : Quality first, customer first and 100% satisfactory service. lifetime money-back guarantee - comply with all relevant safety standards: CE, SGS, RoHS, ISO 9001:2008. If there are any issues with your order, please contact us.
• ✅ KIT INCLUDE: Ring terminals 130 pcs, Butt connector 30 pcs, Spade terminals 60 pcs, Quick disconnect 80 pcs (male and female).

User questions & answers

Question:	Are these heat shrinkable
Answer:	No, they are not. Use crimp tool but you can combine with heat shrink tube to use together.
Question:	Do they dissolve in gasoline
Answer:	Should be no reason for them to sit in gasoline and you should heat shrink your connections !
Question:	can these be used for 120 volts 15 amps
Answer:	Yes they can be used for 120 and 150 and 170 Volts 15 up to 60 amps Hope that helps you
Question:	I need a connector that will fit an 18 gauge wire and will fit an M8 bolt, does this set have some other will work
Answer:	I don't know right off hand . A 8mm & 5/16 are about the same

• ABRASION RESISTANCE AND ENVIRONMENTAL PROTECTION HEAT SHRINKABLE TUBE:The heat shrink are specially designed to be used in harsh environments.Offer protection to the wires and cables from abrasion,cutting,scuffing and low impact situations.Create cable entry seals,offering environmental sealing protection.
• PREMIUM SOLDER SEAL RING:The enough solder around the wire,Melt and flow until form seal on the wire.Ensure a long lasting connection especially if making a larger connection.
• WEATHERPROOF:Proper amount of hot melt adhesive systems provide adhesives.Cool, harden and reach their bond strength within seconds.Weatherproof.Give your application long-lasting bond！
• QUICK OPERATION:With only a heat gun, the wires can be tightly secured and connected.
• QUALITY COMMITMENT:We stand behind the quality of our products. If for any reason you are not satisfied with your purchase,please contact us.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!

User questions & answers

Question:	Can you use solid wire too
Answer:	Sure
Question:	What is the amperage rating when rated at 240V
Answer:	Depends more on the wire size, but I would think less than the wire itself unless you mechanically twist the joint, too. Solder as the primary conductor in the joint isn't the best if the joint is likely to get heated by the current.
Question:	Do you crimp these or just twist the wires together and heat shrink them? if no crimping, how strong is it compared to crimping and heat shrinking
Answer:	You will just need to twist the wires together and heat shrink them. Solder inside the connector will melt and bond the wires together. The connection is almost as strong as crimping and heat shrinking. When heat is applied, polyolefin tubing reduces in size and adhesive flows inside the insulation, creating a strong seal
Question:	What temp do I use on the heat gun
Answer:	Low flame

Product features

Haisstronica Solder Seal Wire Connectors

• Shrinkage ratio 2:1
• Dual-walled design tubing: polyolefin tubing on the outside and hot melt adhesive inside Color coded connector tubing Heat activated waterproof adhesive
• Low temperature solder sleeve Minimum shrink temperature: 80°C
• Minimum temperature for solder to melt: 138°C Reusable case included

THE PERFECT SOLUTION

• The enough solder around the wire,form seal on the wire.
• Ensure a long lasting connection.

A MUST-HAVE FOR MARINE USE

• Proper amount of hot melt adhesive systems provide adhesives.
• Solid water proof connections.Give your application long-lasting bond！

ABRASION RESISTANCE AND ENVIRONMENTAL PROTECTION

• The heat shrink are specially designed to be used in harsh environments.
• Create cable entry seals,offering environmental sealing protection.

AUTO

Used for most general purpose tasks around the boat or car. Get your back on the road.

LIGHT

The wire is firmly connected.dispel dark, the warm lights accompany you all the way.

DIY

The great variety of connector types means that there are multiple choices in the initial research model, and there are always sizes that you want to replace.

Product description

Specification

Material

Professional copper wire made

Package include

1 x radio wire harness

• Compatible with Honda civic 1986 - 1998 w/o Keyless Entry, 1986 - 1997 Accord, 1997 - 1998 CRV. Please fill your car model in the fitment to check fit or not.
• Replacement for Acura 1986 - 2001 Integra, 1996 - 1999 CL, 1996 - 2003 RL.
• Make of professional copper wire, Reliable quality, safe and secure.
• Help for install an aftermarket radio use existing factory harness. No cut factory wires. Pre-stripped wires are using standardized color codes. Before install, check the pins, not just the colors, it would be better.
• Connect wires to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your new receiver may, or may not, match the wire colors of the adaptor. Match adapter and receiver wires by function, disregarding color.

• TAP INTO ANY WIRE WITH EASE– Becory Self Stripping Electrical T Tap Connectors will tap into any wire without needing to cut, strip or solder. Mid span wiretapping has never been easier before.
• PREMIUM QUALITY- Brass element construction for good conductivity and tin plating for corrosion resistance. High-temperature resistance up to 221℉.
• THICK TINNED COPPER CONTACTS - Thicker tinned copper contacts will not bend even when tapping into thicker wires. Safe structure, prevent short circuit.
• WIDE APPLICATION- Quick splice T-tap connectors are widely used in the wire connection of automotive, motorcycle and home wiring projects. Different colors allow you easy to identify and choose quickly.
• PERFECTLY FITTING MALE QUICK DISCONNECTS - Nylon male disconnects have been designed to lock tightly on the T Tap connectors to prevent sliding out.

User questions & answers

Question:	Will these work for connecting wires of *different gauge*? e.g. 22 gauge red spade connector to 12 gauge yellow snap connector
Answer:	YES, I've done that many times. It is best to make a separation of the 12 gauge wire insulation, so the clip makes good contact.
Question:	Will these be okay to use on 110V AC home wiring for a ceiling fan
Answer:	I would say no use twist terminals or wire nuts

Product features

Specifications

Quick Splice Connector:

Red: 40pcs A.W.G 22-18 - Wire range (0.5-1.0mm²).

Blue: 40pcs A.W.G 16-14 - Wire range (0.75-2.5mm²).

Yellow: 40pcs A.W.G 12-10 - Wire range (0.5-1.0mm²).

Nylon Fully Insulated Male Spade terminals:

Red: 40pcs A.W.G 22-18 - Wire range: 0.5-1.5mm² (Max current 10A).

Blue: 40pcs A.W.G 16-14 - Wire range: 1.5-2.5mm² (Max current 15A).

Yellow: 40pcs A.W.G 12-10 - Wire range: 4-6mm² (Max current 24A).

Tap into Any Wire with Easy

Self Stripping Electrical T Tap Connectors will tap into any wire without needing to cut, strip or solder.

Quick Connected and Disconnect

Allows making connections between wires that can be connected and disconnect.

Premium Quality

The cores are made of true tinned copper for maximum conductivity and the strongest crimps. It prevents the wire from shorting out efficiently.

Step 1

• Put the wire in the connector.

Step 2

• Use the pliers to fold the connector over the wire.
• Squeeze the connector together until it locks.

Step 3

• Insert the wire into the spade, and crimp it down to secure the wire.

Step 4

• Plug the spade terminal directly into the tap connector.N
• ow you have a secure and insulated connection.

Product description

Glarks 300pcs open barrel wire crimp copper ring lugs wire crimp terminal connectors with heat shrink tubing assortment kit



【Specifications】:

✔ Terminal Material: High quality red copper

✔ Terminal Color: Copper Tone

✔ Terminal Types: Open Barrel Cable Lug Ring Terminal

✔ Terminal Current: 5A / 10A / 20A / 30A / 40A / 50A / 60A / 100A

✔ Terminal Model: OT - 5A / 10A / 20A / 30A / 40A / 50A / 60A / 100A

✔ Heat Shrink Tubing Material: Polyolefin

✔ Heat Shrink Tubing Sizes: Φ2 / Φ4 / Φ6 / Φ8 / Φ10 / Φ12



【Features】:

※ High quality red copper material, good electrical conductivity.

※ These open slot type lug terminal works well with most common cable.

※ The hollow design makes it easier to crimp and solder than the standard closed sleeve type.

※ Terminals are produced under fine processing, clean and tidy, burr-free, make sure the stability of the circuit.

※ Widely used in the machine, electric power, railway, shipbuilding, aviation, home appliance or other automatic equipment.



【Package Detail】:

【Ring Terminal】

OT-5A ----------- 60pcs

OT-10A --------- 50pcs

OT-20A --------- 40pcs

OT-30A --------- 20pcs

OT-40A --------- 20pcs

OT-50A --------- 20pcs

OT-60A --------- 20pcs

OT-100A ------- 10pcs



【Heat Shrink Tubing】

Φ2 -------------- 10pcs

Φ4 -------------- 10pcs

Φ6 -------------- 10pcs

Φ8 -------------- 10pcs

Φ10 ------------ 10pcs

Φ12 ------------ 10pcs

Total Quanyity: 300PCS



Note:

♥ Please check the specific size of the product according to the second picture. Due to manual measurement, there may be errors, please don't mind.

♥ If you have any questions, please feel free to contact us and we will try our best to help you.

• ★【Copper Ring Lugs Terminals】: These open barrel copper ring lug terminals kit include 240pcs 8 types of 60 x OT-5A, 50 x OT-10A, 40 x OT-20A, 20 x OT-30A, 20 x OT-40A, 20 x OT-50A, 20 x OT-60A, 20 x OT-100A with 60pcs heat shrink tubing: Φ2 / Φ4 / Φ6 / Φ8 / Φ10 / Φ12(each for 10pcs) packed in a plastic box, easy to storage and carry.
• ★【Excellent Quality】: These open barrel crimp connectors are made of high quality red copper material, thickness is 1.5mm, has good electrical conductivity and good oxidation resistance, efficient flame retardant, working temperature range is -30 ~ +60℃(-22-140℉).
• ★【Special Design】: The hollow design makes wire connection easier and its open design make it safer to crimp and solder than the standard closed sleeve type, perfect for transformer, circuit breaker.
• ★【Fine Workmanship】: These wire crimp connector terminal lugs produced under fine processing, you will get the products which are clean and tidy, burr-free, make sure the stability of the circuit.
• ★【Function and Use】: These crimp ring terminal can be crimped or soldered, can works well with any cable, widely used in the electrical wire connecting of home appliances, mechanical equipment factory, shipyard, power distribution cabinet.

User questions & answers

Question:	Are these solid copper, or copper-plated Tin or Aluminum
Answer:	Solid copper
Question:	What's the best way to crimp these types of terminals
Answer:	You would need a crimper for open barrel terminals... like this one... https://www.homedepot.com/p/Pro-sKit-Ratcheted-Crimper-for-Open-Barrel-Terminals-300-005/206369459