12 best pc joysticks for mame gamings

Product description

Qenker 2-Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY

Attention Buyers:

Recently received several negative comments about the joystick.We have something to say about the joystick.

1: Make sure the joystick have connected to the right 5Pin slot that the one opposite the USB-B slot.

2: The joystick come with a Octagonal Restrictor.It suitable for most games but not for all.We suggest you to get a 4/8 Way switchable restrictor. you can search ASIN: B07GDGLVKX

3: About the Ball Top Handle.Please use a slotted screwdriver fixed the bottom of the Joystick Shaft to screw the ball top handle down and make sure it will not easy to loose.

We are trying to provide a high quality arcade diy parts. Trust us. The joystick not the best one but it's a good quality joystick if you installed it well.

The Joystick Gaming Experience will changed if you change another type restrictor. We can provide gt-8f  (B07GDGLVKX) & gt-c round restrictor(B07GDH78K9).

Compatible model

Win8/Win7/Vista/XP/2000/98, Linux, MAC OS, Android. Raspberry Pi 1/2/3/3B Retropie Arcade DIY Projects,MAME DIY projects,USB MAME cabinet arcade DIY projects & PC controller computer game etc.

Package Included：

2x Zero Delay LED USB Encoder

2x USB Cable

2x 5Pin wires for Joystick

2x Long 2Pin wires for LED Push Buttons (Only Supply Power for LED Lamps)

20x 2Pin wires for LED Push Buttons

20x 28mm LED Push Buttons

1x Red 5Pin 8 way joystick

1x Blue 5Pin 8 way joystick

1x Install Description

User questions & answers

Question:	Will this work on an old school arcade machine
Answer:	yes
Question:	Will this kit work with pandora box
Answer:	Yes it will
Question:	Will they install into and work with a raspberry pi 3 b+/ modded arcade 1up street fighter ii cabinet? thanks
Answer:	Yes they do, you need usb encoders for each player, To connect to the raspberry pi3. https://youtu.be/09DQCOr6zQM
Question:	Can you use these joysticks for Xbox One
Answer:	What? Is this a serious question?

• Quality: Excellent Control USB Encoder. High Quality 8 way joystick. LED Buttons Good lighting effects.
• Fonction: DC 5V Arcade Illuminated Pushbutton, 8 ways Joystick Use Microswitch with gilded contact leg, excellent electronic performance, long life, reliability tested to 1,000,000 cycles!
• Made with highest quality materials! Heat resistant plastic! Environmentally friendly metal!
• Package: 175 x 95 x 115mm. Each button and joystick are individually packaged
• Support: Perfect LED Kit for Windows Arcade Games PC Games DIY Project Arcade Raspberry Pi for RetroPie system MAME

Product features

Wiring method

• Optimize the buttons interface mode
• Plug and play for easy plugging and unplugging
• Solve the wiring problem that plagues 90% of players.
• Let the player DIY become simple from now on.

Can replace the different ball

• It's hight quality 5Pin 8-ways joystick model. The service life reaches 1 million clicks.
• New interface mode. Reject the wrong interface.

Joystick bottom

• Applicable to the wooden shell and iron shell machine,
• The return of flexible, more wear-resistant; Iron base parallel cone; square gate

Specification map

• All the silver conduction point, contact sensitive; within the iron bar for the stainless steel;
• 2.0 thickness of the electrolytic plate; dust washers; ball detachable, can replace the different ball;

High quality full light LED Push Buttons

• High quality material manufacturing
• High temperature resistant plastic parts
• HD translucent button body & cover
• Rotary design
• Individually independent stickers.
• Buttons can be opened separately to add brand LOGO. Create your own style.
• Each button has 3Pin connectors.

Bright LED Buttons

• The button is set to light all the time.
• The maximum voltage is 5V.
• Plucked gold-plated, gold-plated contacts, micro-sound, long life, test life of up to 10 million times
• Do not use more than 5V of voltage, otherwise it will burn the button !!

Specification map

• Professional fighting buttons
• High quality light-transparent color powder is added to ABS material
• Make the button more crystal clear. Brighter and more uniform.
• Comes with lighting effects, can be used for wood console, metal panels, with the use of various types of animation game

USB Encoder

• The USB Cable: 87Inch
• The 5Pin Cable: 7.9 Inch
• The Buttons Cable: 7.9 Inch
• USB encoder imported SMD components. Work more smoothly. Longer life expectancy. Lower energy consumption.

Button Connection Display

• Please pay attention to the direction of the mark when connecting the button. And the button must be connected as shown in the picture, otherwise they will not work!
• Please read the user manual with the DIY kit before starting your project.

PCB Board

1. USB Print Terminals
2. K1-K12 Push Buttons Terminals
3. 5Pin Joystick Terminals
4. 2Pin Joystick Terminals (Not Used)
5. Auto, Turbo, Clecet, Mode Terminals
6. 6 and 6-1 is Output 5V Power Terminals (Connect the button LED light interface.)

Product description

HAPP Including:

2 * Encoder board

2 * USB cable

34 * 2pin cable 4.8mm for button and joystick



SANWA Including:

2 * Encoder board

2 * USB cable

2 * 5pin cable

26 * 2pin cable 2.8mm for button

• Perfect fit for SANWA style or HAPP style Button and Joystick.
• Suitable for Raspberry Pi, Retropie, MAME and all windows systems!
• No drivers required, just connect buttons and joysticks, plug and play.
• Easy to install color plug ribbon, red for power, blue for joystick.
• Encoder Size 9.5cm x 3.5cm x 1cm, USB Cable 180cm, Button & Joystick Cable 20cm.

User questions & answers

Question:	Does it need a power supply
Answer:	No need, just connect USB

• Exquisite LED arace game DIY MAME jamma's parts selection!
• 100% Zero Delay USB encoder and all Windows systems work flawlessly!
• Perfect LED illuminated parts for 2 player Arcade MAME Jamma and other fighting game DIY Project!
• Includes: 2 x 5Pin Arcade Joystick + 2 x USB Encoder + 20 x Chrome plated LED button (1 Player + 2 Player + 2x Coin button).
• Chrome LED Illuminated push buttons with build-in Blue switch inside, excellent electronic performance, long life, reliability tested to 3,000,000 cycles!

Product features

Wiring method

• Optimize the buttons interface mode
• Plug and play for easy plugging and unplugging
• Solve the wiring problem that plagues 90% of players.
• Let the player DIY become simple from now on.

Can replace the different ball

• It's hight quality 5Pin 8-ways joystick model. The service life reaches 1 million clicks.
• New interface mode. Reject the wrong interface.

Joystick bottom

• Applicable to the wooden shell and iron shell machine,
• The return of flexible, more wear-resistant; Iron base parallel cone; square gate

Specification map

• All the silver conduction point, contact sensitive; within the iron bar for the stainless steel;
• 2.0 thickness of the electrolytic plate; dust washers; ball detachable, can replace the different ball;

1 Player 2 Player + 2x Coin Buttons

• Individually independent stickers.
• Buttons can be opened separately to add brand LOGO. Create your own style.
• Each button has 2 switch interfaces and 2 LED light connectors.
• Plucked gold-plated, gold-plated contacts, micro-sound, long life, test life of up to 10 million times Use voltage: 5V

High quality full light LED Push Buttons

• High quality material manufacturing
• High temperature resistant plastic parts
• HD translucent button body & cover
• Rotary design
• Comes with lighting effects, can be used for wood console, metal panels, with the use of various types of animation game

USB Encoder

• The USB Cable: 87Inch
• The 5Pin Cable: 7.9 Inch
• The Buttons Cable: 7.9 Inch
• USB encoder imported SMD components. Work more smoothly. Longer life expectancy. Lower energy consumption.

Wiring method

• The button is set to light all the time.
• The maximum voltage is 5V.
• Do not use more than 5V of voltage, otherwise it will burn the button !!

PCB Board

1. USB Print Terminals
2. K1-K12 Push Buttons Terminals
3. 5Pin Joystick Terminals
4. 2Pin Joystick Terminals
5. Auto, Turbo, Clecet, Mode Terminals
6. 6 and 6-1 is Output 5V Power Terminals

• Beautiful LED Arace Game DIY Parts for MAME JAMMA Project!
• 100% Zero Delay USB Encoders and Perfect work for all windows systems!
• Perfect Parts for 4 Player Arcade MAME DIY Project!
• include: 4x 5Pin Joystick + 4x USB Encoder + 40x Chrome LED Buttons (1Player + 2Player + 3Player + 4Player + Coin Buttons)
• Easy Insta,Installation Notes. Perfect LED Kit for Arcade PC Game DIY Project!

Product features

Button wiring method

• Optimize the Buttons interface mode.
• Plug and play for easy plugging and unplugging.
• Solve the wiring problem that plagues 80% of players.
• Let the player DIY become simple from now on

Can replace the different ball

• It's hight quality 5Pin 8-ways joystick model. The service life reaches 1 million clicks.
• New interface mode. Reject the wrong interface.

Joystick bottom

• Applicable to the wooden shell and iron shell machine,
• The return of flexible, more wear-resistant; Iron base parallel cone; square gate

Specification map

• All the silver conduction point, contact sensitive; within the iron bar for the stainless steel;
• 2.0 thickness of the electrolytic plate; dust washers; ball detachable, can replace the different ball;

1 Player 2 Player + 2x Coin Buttons

• Individually independent stickers.
• Buttons can be opened separately to add brand LOGO. Create your own style.
• Each button has 2 switch interfaces and 2 LED light connectors.

Chrome LED Push Buttons

• High quality material manufacturing
• High temperature resistant plastic parts
• HD translucent button body & cover
• Rotary design

Specification map

• Comes with lighting effects, can be used for wood console, metal panels, with the use of various types of animation game
• Plucked gold-plated, gold-plated contacts, micro-sound, long life, test life of up to 10 million times
• Use voltage: 5V

USB Encoder

• The USB Cable: 87InchT
• he 5Pin Cable: 7.9 InchT
• he Buttons Cable: 7.9 InchU
• SB encoder imported SMD components. Work more smoothly. Longer life expectancy. Lower energy consumption.

Button wiring

• Optimize the Buttons interface mode.
• Plug and play for easy plugging and unplugging.
• Solve the wiring problem that plagues 80% of players.
• Let the player DIY become simple from now on

PCB Board

1. USB Print Terminals
2. K1-K12 Push Buttons Terminals
3. 5Pin Joystick Terminals
4. 2Pin Joystick Terminals
5. Auto, Turbo, Clecet, Mode Terminals
6. 6 and 6-1 is Output 5V Power Terminals

Product description

Reyann Zero Delay Arcade USB Encoder Pc to Joystick for Mame Jamma & Other Pc Fighting Games

• Zero Delay Arcade USB Encoder For Your Pc Game DIY!
• Generic Game Controller support PC & Raspberry Pi 1/2/3
• Use this Encoder you can build your own Arcade Game Machine!
• 100% Zero Delay USB Encoder to Arcade Joystick! High Quality!
• Support All Joystick and Push Button types which with 4.8mm Terminal!

Features:

Zero Delay Arcade USB Encoder for Your PC Game DIY.

Use this Encoder you can build your own Arcade Game Machine.

Easy Installation Design! Just connected to the push button and joystick.

Support All Joystick and Push Button types which with 4.8mm Terminal.

Support all windows systems & Raspberry Pi Retropie Projects.

It is also a compact encoder. The size for the encoder board just 8.5cm*3.5cm*1cm.

It also can support most Arcade Emulations, Such as MAME, JAMMA & other PC gaming console emulation.

You just need to simply connect your arcade controls into the encoder board with the included wires, then plug the encoder into your computer USB Port. And then just enjoy your arcade Games with your PC.



 

Encoder Feature:

• 100% Zero Delay Game Control Board.
• High performance COMS technology.
• The Joystick IC supports multiple game equipment form.And in two kinds of equipment .Digital mode, Analog mode can arbitrary switching.
• Support TURBO, AUTO, MODE & CLEAR Functions with LED twinkle.

What's inside the package?

• 1x Zero Delay USB Encoder
• 1x USB Cable
• 1x Small Wire Harness bundle for joystick
• 1x Large Wire Harness bundle for push button
• 1x User Manual

• Zero Delay Arcade USB Encoder For Your Pc Game DIY!
• Generic Game Controller support PC & Raspberry Pi 1/2/3
• Use this Encoder you can build your own Arcade Game Machine!
• 100% Zero Delay USB Encoder to Arcade Joystick! High Quality!
• Support All Joystick and Push Button types which with 4.8mm Terminal!

User questions & answers

Question:	Will this work with ps3 or ps
Answer:	I don’t see any available
Question:	Is a dpad counted as a joystick, or would it utilize 4 of the 12 buttons
Answer:	Mine is a hardware Rev 1.2.
Question:	Any info for compatibility with raspberry 4 ?? I read about 1-2 and 3, but no mention about 4... or if there is a new version coming to work with it
Answer:	It hasn't been an issue for me because it came with its own power adapter. However, when I do a 'cat /proc/cpuinfo' command, the last line says: "Raspberry Pi 4 Model B Rev 1.2"
Question:	What are the dimmensions of this board? Length Width and height to top of jack
Answer:	Can you download SUSE or Red Hat or any other distro from it's maker and install it? Most likely not. Are their versions of Linux that run on Raspberry Pi? Several are available. Can you game on it? Simple old school games will probably be okay, but anything with great graphics that require lots of GPU power will be mostly unplayable. Will it run Windows? There is a stripped down version of Win10 meant for little more the the Internet of Things (think hardware controller like remote thermostats, light control, security systems and the like). Is it a complete computer? Almost. You need a Micro-SD card (8GB minimum, 32 GB Max) as the boot drive. You can buy one bare and use another computer to install your favorite distro on your new SD card OR you can buy a SD card with the NOOBS distro already on it. You'll also need a mouse, keyboard and monitor to use it for anything more than a headless device controller. If you need more storage than what you have as a boot drive you can add extra storage by installing a USB storage device like a USB thumb drive or even an external harddrive. Unlike earlier RPis, this RPi3 comes with on board Wifi and BT as well as the standard 100Mb wired network. With all that said I use both of my RPi3s as Media Centers playing out up to 1080p video from my network server to my TVs around the house using the OpenElec distro. OpenElec is a Kodi based distro and as such does pretty much nothing but Media Center stuff. You can also install Raspian which is more of a full Linux distro that you can also run Kodi on. They replace the Windows 7 based laptops running MediaCenter and using about 40 watts/hr with Kodi MediaCenters using about 400 mw/hr at full chat.

Product description

Easyget 2-Player DIY Arcade Kit Zero Delay 2-Player USB Encoder + 2x Joystick + 20x LED Arcade Buttons for PC, Windows, MAME, Mac & Raspberry Pi Retro Gaming DIY

A complete DIY Parts Kit for a 2-Player LED Arcade Game Console DIY.

Including 2x Arcade Joystick, 20x LED Arcade Buttons, 2-Player Zero Delay USB Encoder

Compatible model

Win8/Win7/Vista/XP/2000/98, Linux, MAC OS, Android. Raspberry Pi 1/2/3/3B Retropie Arcade DIY Projects,MAME DIY projects,USB MAME cabinet arcade DIY projects & PC controller computer game etc.

Tips for New User:

1: The item need work with MAME emulator. So before your build your own project, please download one to work with the parts.

2: If you use this kit to build your own Raspberry Pi Retropie Projects. Please search the steps before your DIY.

Package Included：

1x Zero Delay 2-Player USB Encoder

1x USB Cable

2x 5Pin wires for Joystick

2x Long 2Pin wires for LED Push Buttons (Only Supply Power for LED Lamps)

20x 2Pin wires for LED Push Buttons

2x Red 24mm Ring-Fixing LED Push Buttons as start buttons

2x Blue 24mm Ring-Fixing LED Push Buttons as start buttons

8x Red 28mm Ring-Fixing LED Push Buttons as fight buttons

8x Blue 28mm Ring-Fixing LED Push Buttons as fight buttons

1x Red 5Pin 8 way joystick

1x Blue 5Pin 8 way joystick

1x Install Description

• A complete DIY Parts Kit for a 2-Player LED Arcade Game Console DIY.
• Retro game rocker bring you back into 80s / 90s Gaming Experience.
• Zero Delay Double Player USB Encoder board with Auto-Fire, Mode, Turbo Functions.
• High Quality LED Arcade Buttons plus Professional 8 Way Arcade Joysticks.
• Support PC, Windows, Mac, MAME & Raspberry Pi Device. Build your own game machine with this diy kit!

User questions & answers

Question:	Does this idem work with xbox 360/one, and playstation3/4 gameing systems
Answer:	If wired properly, yes, you can use it to build a custom stick for consoles. Plenty of tutorials available on youtube.
Question:	What size drill bit should I use for the holes
Answer:	There are 2 sizes of button, For the main 8 use a 1 1/8'' hole, for small buttons and the sticks use a 1'' hole. Just finished putting my cabinet together, and these were the sizes I used. Depending on the thickness of the board you could try a smaller hole for the sticks than 1'' even. Use some scraps to test, you want to make sure that the plastic circle covers the opening at all stick positions.
Question:	Since this only has one encoder does it show up as 1 or 2 joysticks
Answer:	2 joysticks
Question:	Can two of these be purchased for 4 players
Answer:	Yes

• 【Experience massive nostalgia arcade games 】 You can play multi-platform games (Nintendo Switch/PC/PS3/TV Android/Raspberry Pi/NeoGeo mini ) with this arcade joystick, plug and play .you'll enjoy hours of fun.
• 【Intelligent and unique Design】This game joystick comes with an intelligent design system, and the platform will automatically identify the platform after start up.The unique shape was designed by professional gaming controller designer .It built for gaming enthusiasts, customize the joystick and buttons to suit your playstyle.
• 【Support XINPUT and DINPUT 】This arcade stick is special designed for PC arcade steam games ,Supports the XINPUT and DINPUT when being used on PC XP / VISTA / WIN7 / WIN8 / WIN10.Plug and play .
• 【TURBO Function 】With TURBO function for an excellent gaming experience for play and win some competitive fighting games.
• 【Non-slip & Ergonomic design 】 The unique shape was designed by A professional gaming controller designer .Its moderately size and Ergonomic design , big and comfortable enough to put it on your laps . It comes with suction cups underneath to keep controller stable during intense fighting matches.

User questions & answers

Question:	Does it support recallbox
Answer:	Yes. Switch and the games are region free.
Question:	Does rhis work with the adaptive controller
Answer:	All Switch games are region free. I have bought several Japanese and European games and they work fine on my American switch.
Question:	Does this work with PS
Answer:	The games are arcade games front the 90's They were super fun to play.
Question:	Does it support macos
Answer:	Games included: Final Fight, Captain Commando, The King of Dragons, Knights of the Round and Warriors of Fate, as well as two games that were previously unavailable on consoles: Armored Warriors and Battle Circuit!

Product features

Compatible with Multi-Platforms PS3, PC ,Nintendo switch ,NEOGEO mini ,Android

Product Description:

1. The default new output mode of the PC, press and hold the button for 3 seconds to switch to the output mode.

2. Press the TURBO button and any A/B/L/R/X/Y/ZR/ZL on the SWITCH platform, the function button will be set to burst. Press the TURBO button and use the button you have as continuous shooting.

3.Set the TURBO function on the PC XInput/PC DirectInput/PS3/Android platform is the same as the SWITCH platform, the way to cancel the burst is different.Press the TURBO button and white dot button to cancel the burst function.

4. The rocker base has four non-slip bottom pads that can be firmly attached to the table to prevent the rocker from shaking.

NOTE:

1. If you can not use the USB port of your computer, check the BIOS settings.

2. When plugging in the USB, the SWITCH base does not respond, please check if the wired connection of the SWITCH host is turned on.

Ergonomic design ,its moderately size and shape ,it big and comfortable enough to put it on your laps .

360° Rotary Joystick

The joystick can be rotated in 8 directions and responds quickly,which has a great sense of operation and gives you the best gaming experience, let you regain the fun of playing the arcade.

Super High Quality

The joystick can be shaken 50 million times, never worry about it being damaged by repeated shaking,and the super high quality brings you the best gaming experience.

Gold-Plated Contacts

The joystick features gold-plated contacts for quick response to any of your operations, making you easy to make best moves.

Zero Delay USB Encoder

The joystick‘s built-in zero-delay USB encoder allows it to respond quickly to any of your operations.

Hight Quality Baolian Button

The buttons of the joystick be produced by Baolian, a well-known brand comparable to Sanhe, and buttons can be beaten 50 million times.

Gold-Plated Contacts

The buttons with gold-plated contacts for quick response to any of your operations, making you easy to make best moves.

Baolian Button

The joystick's built-in zero-delay USB encoder allows it to respond quickly to any of your operations.

Authorized by Well-Known Brand

The joystick's rocker and buttons are produced by well-known brand Baolian, good quality, trustworthy.

TURBO Button

Press the TURBO button and any A/B/L/R/X/Y/ZR/ZL on the SWITCH platform, the function button will be set to burst. Press the TURBO button and use the button you have set to cancel the burst function.

Set the TURBO function on the PC XInput/PC DirectInput/PS3/Android platform is the same as the SWITCH platform, the way to cancel the burst is different. Press the TURBO button and white dot button to cancel the burst function.

Non-Slip Bottom Pads

The joystick base has four non-slip bottom pads that can be firmly attached to the table to prevent the rocker from shaking.

2.2-Meter Power Cord

The joystick has a 2.2-meter power cord, so you can comfortably lie on the couch and play games without worrying about the distance of the power cord is not long enough.

• Compatible with Xbox Series X PS4 PS3 XBOX ONE XBOX360 PC Android Switch NeoGeo mini. F300 is compatible with PS5 by MAYFLASH Magic-S Pro or third party PS4 Controllers. Please update to the lastest firmware from mayflash.com
• Compatible with Sanwa Denshi buttons and joystick that is perfect for customization
• Supports the XINPUT and DINPUT when being used on PC
• A SONY PS4 Controller is required when using on a PS4 Game Console
• Update to the latest firmware at MAYFLASH.COM

User questions & answers

Question:	Has anyone tried to use a full sanwa denshi stick with the stock pcb? (not just replacing the gate, but the whole setup)? madcatz stick didn't work
Answer:	Just get the Elite if you don't intend to stay stock. I like to say there is no such thing as a dumb question but this borderline on that since this particular company made a Sanwa Elite version just for that purpose.
Question:	Is this compatible with windows
Answer:	Yea it works fine with street fighter v. I'm running it on windows 10 now
Question:	Does this joystick work for games like pacman, donkeykong, galaga, or mario bros
Answer:	I just bought it and it works for galaga Miss Pac-Man and dig n dug .and of course it's excellent for samurai shodown in Street fighter. Just make sure you plug the controller a joystick into the machine first and then put in your PS4 or Xbox controller into the joystick itself and use the Xbox or PS4 controller to set up the game but play the game with the big joystick
Question:	what kind of restrictor plate does it come with (as in shape
Answer:	Mine came with a rectangular plate installed but it also came with an octagonal restrictor plate which I swapped in. A few screws and it was fixed.

Product features

Arcade Stick F300

1.XINPUT/NS, GAME CONSOLE and DINPUT/PS3

- XINPUT/NS: Supports PC Xinput and Nintendo Switch.

- GAME CONSOLE:Compatible with PS4, Xbox One, Xbox 360.

- DINPUT/PS3: Supports PC Dinput and PS3.

2.X/Y and Dpad

If the switch is set to the "X/Y, the stick works as the "Left Joystick.

If settingthe switch to "DPAD, the stick works as "POV.

3.TURBO-1 and TURBO-2

- TURBO-1: The Turbo speed is 15 times/ second.

- TURBO-2: The Turbo speed is 25 times/second.

4.TURBO

- The 8 function buttons (A/X,B/O,X/ ,Y/ , RB/R1, RT/R2, LB/L1, LT/L2)can be set for TURBO.

- See the user manual to get more details about Turbo function.

Quick Start

- Please make sure you plug the wired controller to the arcade stick when you use it on PS4, Xbox One and Xbox 360.

- The wireless controller that comes with your console will become a wired controller by simply connecting a standard USB cable (with exception of Xbox 360 which requires an official wired Xbox 360 controller). For best results, it is recommended that you use genuine Xbox or PlayStation controllers and quality certified USB cables.

Metal Panel

- The high quality metal panel increases the fighting stick’s weight for a solid and secure feel.

- The big size rubber feet can hold the arcade stick firmly in place on hard or flat surfaces.

Product description

Include:

2x Encoder,

2x Joystick,

20x Buttons,

2x USB Cable,

2x 5pin Cable,

20x 3pin Cable.

• Zero Delay SJ@JX 822B USB Encoder. Easy Installation, Suit for 5V LED.
• Cherry MX Black Switch Button. Non-clicky Recycling 50 million times. Contains Logo and LED is Always Shining.
• Omron-style 4 Micro Switches 8 Way Sanwa Style Joystick. With 5pin Cable
• Button Size 28mm, Joystick Hole 24~30mm, USB Cable 180cm, Button & Joystick Cable 20cm.
• Suitable for Raspberry Pi, Retropie, MAME and All Windows Systems!

Product description

Include:

1x Encoder,

2x 3D Analog Joystick,

1x USB Cable,

17x 2pin Switch Cable.

• Zero Delay SJ@JX 1125 Encoder. Easy Installation, Suit for 5V LED.
• 3D joystick for flight simulation games, Analogue Stick Thumb sticks Joystick Cap Mushroom Head.
• Size: 8.5cm x 3cm. USB Cable 180cm. Button Cable 20cm.
• Perfectly compatible with PC PS3 Raspberry Pi. Support flight simulation games.

User questions & answers

Question:	Will it show up as generic game controller or Xbox
Answer:	Xbox 360 for PC
Question:	Will this work on ps4 or xbox one? if so... how
Answer:	Can't. For Xbox one, http://www.amazon.com/dp/B082PVJZT2?ref=myi_title_dp
Question:	Does it use x-input for the PC
Answer:	Yes.
Question:	is there a pinout or manual available for this board
Answer:	Just connect the button and joystick, The function of each plug is marked on the back of the code plate.

• Zero Delay Arcade USB Encoder for Your PC Game DIY
• Use this Encoder you can build your own Arcade Game Machine
• Easy Installation Design! Just connected to the push button and joystick
• Support All Joystick and Push Button types which with 4.8mm Terminal
• Support all windows systems & Raspberry Pi Retropie Projects

User questions & answers

Question:	can any post sequence a diagram of sequence of buttons?, what i mean is the order of which the bottons need to be connected
Answer:	If it's for retropi order doesn't matter, the buttons just need to be mapped.
Question:	Flight simulator compatible? Specifically XP
Answer:	Hi thanks for your question, this product is compatible with general windows software, we didn't use XP11 before but we believe it may work.
Question:	Just to make sure, does this work with a 12v button/switch
Answer:	Hi thanks for your question. I am sorry this product does not work with a 12v button/switch. Any other question please feel free to contact us through email [email protected]. We will always happy to help you out. Thank you!
Question:	Is this item support a happ joystick competition 8 way america style
Answer:	Hello friend, yes, this encoder board can support a HAPP joystick.