11 best plastic patch kit

Product description

Gorilla Waterproof Patch & Seal Tape instantly seals out water, air and moisture. With an extra thick adhesive layer and UV resistant backing, this flexible tape conforms to form a permanent bond indoors and out. At 4 inches wide use it to patch holes, cracks, gaps and tears, even underwater. Excellent for Home, auto, marine, camping, RVs, outdoors and more. Will work on plastic, metal, aluminum, rubber, wood, vinyl, glass, steel, acrylic and much more. Gorilla Waterproof Patch & Seal Tape can be applied in hot, cold, wet and dry conditions. For best results, apply the tape to a clean surface at room temperature: 1. Keeping liner on the tape, cut tape to desired size. Tape size should be larger than the repair area, extending beyond all edges. 2. Remove the release liner and place tape over the desired repair area. The tape cannot be repositioned once applied. 3. Rub entire surface of the tape aggressively, especially the edges. Storage: Store tape on the top and bottom disc at room temperature. Edges of tape may be sticky. Service Temp: -70°F to 200°F. Performance will be dependent on surfaces & conditions. Surfaces must be clean, smooth and non-porous. Water must be pressed out from underneath tape. Not for use on seams, applications under pressure, or automotive applications under the hood. May not adhere to silicone or water-repellent materials. Do not use to hang. Permanent: may damage surface or paint if removed. Click on the Gorilla Link at the top of this page to visit the Gorilla Brand Store.

• PERMANENT: Creates a permanent bond that instantly seals out air, water, and moisture.
• INDOOR / OUTDOOR USE: Gorilla waterproof patch & seal tape works great on indoors and outdoors repairs and even under water.
• EXTRA THICK: Has an extra thick adhesive layer and UV resistant backing.
• FLEXIBLE: Conforms to the surface to repair holes, cracks, gaps, and tears.
• FIXES LEAKS: Repairs leaks in roofs, rubber, plastic or vinyl pool liners, and so much more
• 2X more tape than other 5 feet flexible tapes
• Also available in black

User questions & answers

Question:	If used on the rubber side of a bath rug that has tears in it, can it then be placed in the washing machine
Answer:	You can mix it with CLEAR acrylic paint (also know as acrylic medium) and then paint that onto canvas on top of the regular, colored paint. If you mix the powder with colored paint, the pigment in the paint will cover up most of the glow pigment and waste it. If you mix it with acrylic paint medium you will get the best glow possible!
Question:	can i use this on a canvas boat cover
Answer:	I would not mix it directly with concrete as only the glow crystals on the very top would be visible. Instead you'd be better off adding it to a clear concrete sealer and applying that on top of the concrete. You could also try pressing a layer of powder into the top of wet concrete so that it is the top layer of the concrete. Definitely experiment with a small amount first to see if you get the effect that you want before doing a larger project.
Question:	Does gorilla seal tape work on plaster next to bathroom tubs
Answer:	Not really, the packets are small.
Question:	Can I use this to seal my sunroof
Answer:	I've bought and recieved this product many times.

• TEAR-AID Repair Patches provide a simple and easy method of patching holes and tears, as well as an excellent protective film solution. Each TEAR-AID Repair Patch is made from an exceptionally tough, matte finish, abrasion resistant, elastomer that resists puncture and tearing
• The TEAR-AID Type B vinyl repair patch sticks to - Vinyl and Vinyl-coated material ONLY. Vinyl has oils that are absorbed by most adhesives which causes the adhesive to turn gooey, gummy, and ultimately lose bond. Tear-Aid vinyl repair patches contain an inhibitor that blocks the oils found in vinyl resulting in a long lasting repair
• The TEAR-AID patch is see-thru to work on any color and is UV resistant to prevent yellowing for years. It provides instant adhesion with no sewing, NO GLUE and no mess. The patch also conforms to irregular surfaces and won’t turn gummy in high heat
• Each patch kit contains - 3" x 12" TEAR-AID Patch that cuts easily with scissors to any size,  7/8 x 7/8" Patch, 1 3/8 x 1 3/8" Patch, 12" Reinforcement Filament for repairing tears at edges, Alcohol Prep Pads, Illustrated Instructions, Kit Dimensions: 3"x 5.5"x 1.25"
• TEAR-AID repair patches are MADE IN THE U.S.A. of the highest quality and standards. Keep TEAR-AID handy and be prepared to be a hero. Don’t throw it away repair it.

User questions & answers

Question:	Does this come in larger sizes? I need about at least a 5" width but can't find one with that option
Answer:	Retail kits only come with 3" wide pieces. We can custom cut 3" wide pieces of varying length that you can overlap - not available through Amazon at this time. 6" wide rolls are made by the manufacturer; however, we do not stock these unless you'd like to special order an entire 30' roll. Inflatable Mannequins
Question:	Will this work on a pvc inflatable raft? product says vinyl but my raft is constructed of pvc
Answer:	worked very good on my tow behind raft
Question:	is it a roll or just 1 patch
Answer:	Its a big patch. Approx. 12x12 inches
Question:	Has anyone used this successfully o inflatable raft that you would use on the ocean beach with waves that has a small hole - any special technique
Answer:	I have used it to repair big and small water inflatables. Many of them are anchored down and float on the water all the time. This patch kit works better than just about anything else we have ever tried. It hold the pressure of the air even with people bouncing on it. I have ordered like 6 boxes this year already. There are always small holes that appear or old patches (not these ones yet but other types of patches) that need to be replaced.

Product description

Gator patch is easy to use and apply with our prep-peel-stick application. Cures simply with UV light in under an hour. Gator patch features the extraordinary bonding and reliability promise that over 100,000 clients have known for nearly 20 years. Made with pride in the USA.

• 3″ x 6″ UV cure fiberglass reinforced repair patch is watertight, impenetrable
• A prep-peel-stick application that cures simply with UV light in under an hour
• Repairs almost any surface, will Bond to virtually all materials, moldable around flat or curved areas, dents, joints, or angles
• Can be drilled, tapped, sanded, or painted within hour
• Perfect in or out of the water!  great for any fiberglass or aluminum boat, kayaks, canoes, tanks, plumbing, and more

User questions & answers

Question:	Can it be used on hdpe kayaks
Answer:	The hook is plastic.
Question:	Will this cure on the inside of a Kayak
Answer:	It should. My son is 150# and 5'8" and its a bit big for him.
Question:	Would this work on a boat lift tank that has a little air pressure in it, just enough pressure to keep the water out of the tank
Answer:	5 pages
Question:	Can these be used to repair a split in a Rubbermaid 40 gallon tub sidewall
Answer:	Yes, this is light disbursing textured so there is no glare.

Product features

Gator Patch Repair Kit

Gator Patch is a Fiberglass Reinforced Polyester Patch that is easy to use and apply with our Prep-Peel-Stick application. Cures with simple UV sunlight in under an hour. Features extraordinary bonding, reliability, and strength. Perfectly matched as a kayak keel guard and repair patch. Made to stick to and repair unforgiving surfaces like Plastic Kayaks, Gas Tanks, Fiberglass, Aluminum, and more.

Plastics

Plastic Boats, Kayaks, Gas Tanks, Plumbing, PVC Pipe and more. Gas, Diesel, Ethanol Resistant and impenetrable for all your tank repair needs.

Metals

Aluminum, Steel, Jon Boats, Tools and more. Perfect for watercraft that see aggressive use and need a quick or permanent repair.

Fiberglass & Wood

Fiberglass, Wood, Foam, and more - Gator Patch is great for structural repair on surfaces or components that are costly and hard to repair.

Kayak & Canoe Damage

Plastic boats encounter drops, skids, cracks and worse from concrete ramps, rocky shorelines, oyster bars and more.

Prep-Peel-Stick Application

Gator Patch easily applies in just minutes - curing using natural UV Sunlight in well under an hour. You'll be back on the water in no time.

Rugged Protection

The Fiberglass Reinforced Polyester Patch makes a great Kayak Keel Guard against everyday hazards such as concrete ramps, driveways, and more.

100% American Made - Protection You Can Trust

It all started in 1994, when one of our founders identified the need for a quality keel protector to guard her families boat. Like other boating enthusiasts, she was tired of enjoying a great outing - unknowingly causing thousands of dollars of damage to her boat’s hull while out on the water.

So since day one of Gator Guards inception, Sue and her team have worked tirelessly to research, develop and bring the best protective technologies and products to the marine industry. The result of their innovative approach and passion for all things marine can be seen in multiple product lines, including, KeelShield, BowShield, SkegShield, GatorSkinz, Hitch Guard and Gator Patch.

With almost 25 years in the business and over 100,000 satisfied customers, we proudly stand behind the best products in the industry. Made 100% right here in the USA - backed with superior warranties for your full and complete satisfaction.

KeelShield - BowShield - SkegShield -GatorSkinz - Hitch Guard -Gator Patch are registered trademarks of Gator Guards. The entire lineup of quality marine protection products can be found on Amazon.

Product description

J-B Weld Plastic Weld Epoxy Putty Plastic Weld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Plastic Weld has a 20-25 minute work life; functional cure occurs in 2-3 hours. Plastic Weld cures to an off-white color, is rated at a tensile strength of 350 PSI. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first. Use on: AutomotiveCeramicFiberglassPlastic/Composite/PVCAnd more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces. J-B Weld PlasticWeld is designed for DIY plastic repairs on ABS, PVC & CPVC pipes and plastics, auto bumpers and more! PlasticWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours. J-B Weld PlasticWeld set and cure color is off white.
• PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI. PlasticWeld can withstand continuous temperatures up to 250oF (121oC) and intermittent temperatures up to 300oF (148oC) when fully cured. PlasticWeld does not shrink and can be molded, shaped, sanded, drilled and cut.
• APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
• Bonds instantly

User questions & answers

Question:	Will this product repair broken plastic boat windshield inviisibly
Answer:	will this product repair a broken plastic door handle
Question:	Can it be used more than once, or is thrown away after one use
Answer:	Comes with a resealable cap, I opened mine at least two weeks ago and have still been able to use it (also used on multiple projects during those weeks). Just be careful to replace the cap in the same holes you removed it from or you will mix the two components and seal the lid.
Question:	Will it seal a PVC pipe that has a 1 inch slit? Must hold 75lbs of water press. Would put a rubber patch & 2 pipe clamps over it
Answer:	Yes, it is awesome! I've used it for years! It should work great!!
Question:	Is this product good for the broken plastic frame of eyeglasses? The eyeglasses is broken on the temple leg
Answer:	As an optician for over 30 years, sadly, nothing I've found short of a 2 part epoxy/resin will work...but only .temporarily. plus you'll probably get it everywhere including the lenses. I suggest visiting your local optician. I have tons of discontinued frames and can usually hand-edge the lenses if its a close fit . BTW, its the same with so-called scratch removers for eyeglass lenses:snake oil. hope this helps... John shameless plug follows: glassescontacts.com or FB.

Product features

Epoxy Putty

PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. *After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life; functional cure occurs in 2-3 hours. PlasticWeld cures to an off-white color, is rated at a lap shear strength of 600 PSI. Does not adhere to polyethylene, polypropylene, or some other plastics.

Additional Attributes

• PlasticWeld NSF Certified - Safe for contact with potable water.
• PlasticWeld can resist continuous temperatures of 250°F (121°C) and intermittent temperatures of 300°F (149°C).

Product description

GWHOLE 20 Pcs Inflatable Repair Kit Repair Patches for Inflatable Airbeds, Toys, Pools



How to use:

1. Insure area to be repaired is completely clean and dry.

2. Remove paper backing from patch.

3. Place repair patch over hole and press down firmly.

4. If repairing an inflatbale product such as a lilo do not inflate for 30 minutes.

5. To repair under water, follow above instructions, using sufficient pressure to squeeze out all water and air bubbles.



Warning:



Not suitable for children under 14 years old. To be used under the supervision of an adult. Check several times after application sealing, ensure perfect positioning, do not stick on folds, edges or wet surfaces .



Package contents:

20 Repair patches

• Made of premium vinyl with strong adhesive, transparent and durable.
• Size: 2.17 x 2.56 inch, can be cut to the size you need
• Provides easy and quick repairs, simply peel and patch!
• Suitable for repairing small slits or leaks on water bales, pools or inflatable toys, other inflatable stuffs.【Notice】Insure area to be repaired is completely clean and dry.
• Package includes 20 patches with instructions on back of patch, enough for a long time use.

User questions & answers

Question:	Does this patch work on Bouncy House repairs
Answer:	I'm not 6 feet tall so I can't say for sure about it but I expect it is long enough.My issue was the the chest as it was tight enough even when at full expansion that it was inhibiting chest wall movement in deep inhalations.
Question:	Would this work on an inflatable pool seam
Answer:	Take a look at your chest'measure so you can be sure about the size suitable for you. For example if you are 16" you need a regular size since it is for 15" to 19".

Product description

Self-adhesive vinyl repair patch plastic repair patches kit for swimming pools inflatable boats products



Quality material:

These self adhesive repair patches are made of PVC material, durable and firm to use, hard to be worn out and break, non-toxic and no odd smell, good material to ensure you long time usage.



Widely applicable:

With the self adhesive function, you can use them to easily repair your inflatable watering products, such as inflatable boat, raft, kayak, canoe, water toys, inflatable sofa, and more, bring you much convenience.



Specifications:

Material: PVC

Color: as picture shown



Package includes:

30 x Vinyl repair patches



Note:

Please allow slight size errors due to manual measurement.

• Easy to use: thanks to the self-adhesive back, all you need to do is to cut the patch into the shape you want and apply it to the target area, press the area with heavy things for several minutes can achieve better results, very convenient to operate, providing you with fast, instant repairs to rips or holes on various inflatable products
• Proper size: detail size information can seen in the pictures, the plastic repair patch can be easily trimmed into various shapes or sizes to meet your different needs, a must-have for your daily life
• Quality and durable: these vinyl repair patches are made of PVC material, durable and firm to use, hard to be worn out and break, non-toxic and no odd smell, good material can ensure you long time usage
• Large quantity to use: different quantity sets for you to choose, sufficient to meet your use and replacement, plastic repair patch can fix holes in your inflatable items effectively without leaving a noticeable repair trace
• Wide applications: with the self adhesive function, you can use them to easily repair your inflatable watering products, such as inflatable boat, raft, kayak, canoe, water toys, inflatable sofa and more, bringing you much convenience

Product description

Fiberglass Patch, UV Cured, Off White, 3 x 6 In. Patch, Envelope Application Time 3 min., Full Cure 1 hr., Work Life 5 to 15 min., Boats, Engine Parts, Decks, Water Tanks, Fenders, Drain Pipes and Gutters, For Use With UV/Sunlite

From the Manufacturer

The permanent patch is a very unique easy to use UV or sunlight activated repair patch. It is fiberglass reinforced polyester and creates long lasting repairs. No mixing is required. One step no mess. It can be cut to size and molded into shape. It is waterproof and in less than one hour is can be drilled tapped sanded and painted. Use on metal, Plastic, gutters and more.

• Adhesives & Sealants
• Country of manufacture: United Kingdom
• Package Weight : 0.077 kilograms
• Package Dimensions: 0.05 L x 22.098H x12.7W(centimeters)

User questions & answers

Question:	In the uv protection of indoors can i open package, cut & use a small piece, and store the unused balance for future use
Answer:	Not at all, I've been using the Vandoren Optimum ligature for my alto sax for 7 years and is in perfect condition. I don't think the clarinet ligature should be different in its quality or construction. It's a great ligature when I started using it the sound opened and developed more body. I'd recommend it 100%.
Question:	I am looking to fiberglass the bottom of a 9 foot surf board. Will that work and how large an area will each box cover (square feet
Answer:	Hi, We sell plates separately, amazon stock code- B075HZ4BYS https://vandoren.fr/en/saxophone-ligatures/ Best Regards, Ian, sound Biz
Question:	Will it harden if im using it indoors in a shower floor without sunlight
Answer:	If you are asking what kind of mouthpiece I am using with this ligature, I use a vandoren V16 T8. Otherwise I don't understand your question...
Question:	Will this work to patch the hole in the bottom of a fiberglass canoe
Answer:	Fabrics darken and contain the sound. Metal ligs brighten and allow more sound. I’ve done the testing and spent the $$$$$ in the last 8 months with many different types. I got almost every Rovner and regular metal ligatures. This plate “invention”will not give a significant difference between another of the 3. If you want a decent tone, get a rovner legacy or evo 5. The evo 5 is better than the SS. Make sure you leave your Reed just a little space away from the tip of the mouthpiece.

Product description

Item Package Quantity:

40Pcs| Size:3.9in X 3.9in(10cm X 10cm)

Quality material:

these vinyl repair patches are made of PVC material, durable and firm to use, hard to be worn out and break, non-toxic and no odd smell, good material can ensure you long time usage.

Wide ranges of usage:

With the self adhesive function, you can use them to repair your watering products effectively, such as inflatable boat, raft, kayak, canoe, water toys, inflatable sofa, air mattresses and more, bring you much convenience.

Material: PVC

Note:

Please allow slight size errors due to manual measurement.

• Made with industrial-strength adhesive.
• Suitable for all kinds of inflatable products, such as air mattress, inflatable boat, inflatable sofa, swimming ring, inflatable swimming pool, etc.The patch can also be used to repair or bond a variety of materials, including: PVC, etc.
• Suitable size: you can see the detail size information from the pictures, you can easily snip these repair patches into various shapes or sizes to meet your different needs, a necessary and practical accessory in your life.
• Fast curing, watertight and durable.
• he patch can help fix holes in your inflatable items effectively, and you can find that it can't see the repair trace nearly.

Product description

Use this patch repair kit to patch holes in your inflatable items.

• Model number: 59631NP
• Package quantity: 1
• Product type:FABRIC APPLIQUE PATCH
• Package dimensions:0.25" (L) x 9.14" (W) x 9.91" (H)

User questions & answers

Question:	will this work on a waterbed
Answer:	I believe it is a synthetic material.
Question:	Would these be suitable for an Intex bouncy castle
Answer:	The model of clarinet is irrelevant. You need only be concerned with the mouthpiece. Although I don't think it will be an issue (the 1R ligature should fit even a Selmer Goldentone), you can take your mouthpiece to a local music shop and size it with the Rovner 1R.
Question:	does liner in pond have to be dry to apply patch
Answer:	On any ligature, the screws should be on the right, as the clarinet is in playing position. On some ligatures, this will mean the screw is on the front. In other ligatures, this will mean the screw is on the back. So, always the screw on the right hand side.
Question:	Hello, do you think this is going to work for a hot tub? Is it going to resit the temperature
Answer:	The pictures in the listing show the ligature mounted upside down and backwards. The photographer was clearly not a clarinetist. Don't trust Amazon photos for instruction on how to use a product.

Product description

Curing Time:

Ready to use in ~2 hours

Fully cure in 4 hours



Operating Temperature:

70~104°F (20~40ºC)



Method of Application:

Peel and stick



✅ Instruction:

1. Use only in well-ventilated area. General indoor ventilation may be adequate. Optimal temperature for application is 70~104°F (20~40ºC).

2. Clean the surface to be repaired thoroughly and keep dry. Wipe off the dust, oil with alcohol pad.

3. For even better adhesive, use adhesion promoter sponge and let it dry for about 1 min.

4. On flat surface: Peel off the backing paper and stick the patch to the surface, fully covering the leaks/seams/holes/slits. Press firmly to force out any air bubbles.

5. Lieave it under presure 3-5 Lb for 2 hours. It takes 4 - 6 hours for the adhesive to fully cure.









Product type: Vinyl patches, swimming pool patch, accessories swimming pools, air bed, inflatable toys. Peel & Patch Pool Liner Repair Kit

• Made with industrial-strength adhesive
• Provides easy and quick repairs – simply peel and patch!
• Fast curing, watertight and durable
• Repairs small slits or leaks on inflatable toys, inflatable products and other plastics
• Satisfaction or money back guarantee

Product features

Pool repair kit

Pool repair kit

Suitable for pool liners and plastic liner, as well as all kinds of inflatable products, such as pool liners, air beds, air mattress, inflatable tents, inflatable toys and more.

Pool repair patch kit

Pool repair patch kit

• Made with industrial-strength adhesive
• Provides easy and quick repairs – simply peel and patch!
• Fast curing, watertight and durable
• Repairs small slits or leaks on inflatable toys, inflatable products and other plastics

Pool vinyl patch

Pool vinyl patch

vinyl patch kit for inflatables

Pool liner

Pool liner

Underwater pool repair

Underwater pool repair

Product description

Tecmisse 10 Pieces TPU Repair Patches Kit, Self-Adhesive Plastic Repair Patch for Inflatable Pool,Toys, and Air Beds

It can repair inflatable boats and is suitable for various high-value inflatable products, such as air cushions, inflatable boats, trampolines, inflatable sofas, swimming rings, balloons, etc.

Specifications

Material: TPU

Size: 2.8 x 2.8 inch

Color: Clear

Quantity: 10 pieces

Package includes

10 x TPU float patch repair kit

• You will receive 10 pieces TPU Repair Patches Kit.
• Each repair patche approx. 2.8 x 2.8 inches / 7 x 7 cm, Easily patch most vulnerabilities.
• High-strength TPU material, waterproof and high temperature, strong adhesion.
• It is very simple to use, keep the cracks or leaks near, dry and dust-free, just stick on the patch.
• Easily repair small gaps or leaks on inflatable objects such as inflatable swimming pools and inflatable toys.