14 best drone rating

Product description

* FPV System

VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)

Channels: 37CH incl. Race band

Camera: RunCam Nano 2 1/3" 700TVL CMOS

Smart Audio Connected

* Includes

1x Tinyhawk II FPV Racing Drone

1x EMAX Transporter 5.8G FPV Goggles

1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging

1x EMAX E6 Transmitter

1x EMAX 450mAh 1S HV Battery

1x EMAX 300mAh 2S HV Battery

2x CCW + 2x CW Spare Props

1x 1S-2S USB LiPo Charger

1x Screwdriver + Hardware Kit

1x Micro USB Charging Cable

1x Faux Carbon Fiber Carrying Case

* For the included 2S Lipo, please only charge via the larger balance connector only on the stock charger, and have it set to the Lipo position. Do not plug any non-1S LiPo batteries into the PH2.0 connectors on the charger, even if it fits (e.g. the 2S LiPo of the TinyHawk S). The 2S LiPo and charger may become damaged.

RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE

• Great for beginners
• Durable FPV Drone
• Comes with controller and goggles
• Experience real life FPV

User questions & answers

Question:	Can i wear the goggles with my glasses on
Answer:	Depends on the glasses I suppose. I use the FatShark HDO 2 and don’t need to wear my glasses with them. I’m nearsighted so that may be different from you.
Question:	Do the goggles record the flight of the drone
Answer:	No, the rtf goggles do not record
Question:	Is there free returns
Answer:	Yes

Product description

Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. 

it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly!

Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings.



Highlights:

5mm arm design for more durability

Easy-Swap arms

LED illuminated Logo

XING-E 2207 motors and NAZGUL 5140 props

5" version also fits 5.1" style propellers

Popular True-X configuration

TPU crash-guards

Fits both 30.5x and 20x stacks



XL5 V5 frame specs:

SucceX-E F4 45A flight stack

XING-E 2207 FPV Motor 6S 1800kv

Wheelbase:   240mm*240mm

Body size: 170*170mm

Propeller size: 5 inch /5.1 inch

FC pattern: 30.5*30.5/20*20 mm

FPV cam spacing: 19mm

Weight: 393.4g (without battery)



FACTORY SETUP and WIRING DIAGRAM:

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly.

We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?

No need to worry! All Factory Dumps and Wiring Diagrams can be found on iflight Google Drive.



Recommended Parts (Not Included)

Battery 6S 1300mAh

TPU HD camera mounts for gopro



Includes:

Prebuilt and tested Quadcopter

1x XL5 V5 Frame

1x Caddx Ratel, 2.1mm lens camera

1x RHCP SMA 5.8g antenna

2sets x Nazgul 5140 propeller (Color may vary)

1x 20*200mm Battery Strap

1x 20*250mm Battery Strap

• 1.Nazgul5 V2 fpv racing drone bnf built with latest iFlight XL5 V5 fpv frame: popular true-X layout,5mm easy-swap arms ,360° full body TPU protection and antenna mounts
• 2.Built  with the Frsky XM+ receiver,so you can bind this drone to your Frsky radio controller
• 3.Pre-tuned and freestyle setup, everything you need is just bind-and-fly
• 4.This 5inch analog fpv drone design for professional pilot,Recommended: 1300mah 6s lipo battery.
• 5.When you have any question,write to us,we will provide best customer service.

User questions & answers

Question:	Will this work with the frsky taranis lite? i also have the xjt lite module if that even matters
Answer:	No. It does not have solitaire. Most of the games are old arcade games.
Question:	Is this product compatible with spektrum transmitters
Answer:	Device is not compatible with BT technology.
Question:	Is this a kit
Answer:	Return was easy. I ordered in mid December before Christmas, the game system was faulty and I just put it back in the original box, UPS brought me a return label and I dropped it off at the UPS store end of January. They returned the money to my account the next day. I would have returned it sooner, but didn't realize it was faulty until the next time I tried to charge it for my son.
Question:	How do you bind to frysky q7 can not find the bind button is it the one on the flight controller i hold that one during powering and its not binding
Answer:	Yes .You can hook up to TV and play on your big TV screen. After connect to TV ,all the family can watch it when you or your kids are playing it .It would be so much fun for the whole family.

Product description

Bolt introduces first person view drone piloting experience complete ready to fly at an accessible price. Experience the thrill of flying in 3 different ways and skill levels - line of sight, First person view with screen and first person view through the goggle.

Featuring an innovative FPV goggle and controller system, HD camera, altitude stabilization and a carbon fiber frame, the Bolt packs cutting edge technology at a radical price point that offers amazing value. The Bolt is a complete easy-to-fly solution that makes FPV drone piloting and racing accessible to everyone.

1. Line of Sight - First for beginners, to start flying simply turn on the drone and turn on the controller. The two will sync up and pair, and you can take off. The drone features altitude stabilization and a beginners mode that makes picking up the basics a breeze. Learn how to safely and confidently maneuver and control your drone.

2. Screen on Controller - Next, for those ready to expand their skills and horizons, attach the screen to the controller and start piloting the drone further away. Simply turn on the drone and the screen. The camera on the drone will automatically sync with the screen and broadcast a live high definition feed. Mount the screen on the controller and youre ready to go.

3. First Person View Goggles - Finally for those ready for the full First Person View experience, swap the screen into the goggles and prepare for a whole new drone experience. Immerse yourself into the world of FPV piloting and cruise around high in the sky.

What’s included in the box?

Bolt Drone

HD Screen

FPV Goggles

Controller (requires 4 AA batteries, not included)

Drone Battery

USB Drone Battery Charger

Screen Battery

USB Screen Battery Charger

1 Set of Propellers

• 3 WAYS TO FLY From line of sight, to screen controller, to FPV, there are 3 ways to fly the Bolt Drone. Included is an HD camera that will sync with the screen and broadcast a live HD feed. For those ready for the full First Person View experience, swap the screen into the goggles and prepare for a whole new drone experience.
• INNOVATIVE VIEWING The Bolt features a unique and innovative FPV viewing system that allows seamless transition from traditional viewing on controller to FPV viewing using goggles. Simply slide the screen into the goggles for FPV piloting & racing, or swap it back to the controller for recreational flying. Experience virtual reality flying!
• Carbon Fiber Frame - durable and lightweight HD Photo and Video recording 5.8 ghz receiver/transmitter for reliable and clear performance
• Complete Ready to Fly Racing Drone Set includes: Goggles, Screen, Carbon Fiber Drone, Battery and accessories
• The Bolt is a carbon fiber drone that introduces the exciting world of First Person View (FPV) piloting and racing to everyone.

User questions & answers

Question:	What is the drone’s top speed
Answer:	30 miles per hour
Question:	does this come with the carring case
Answer:	No, unfortunately it does not come with a case, but the size of the drone makes it easy to find one!
Question:	Does it record
Answer:	You need an MicriSD card...
Question:	Can this drone use a universal battery
Answer:	No, there is no such thing as a "universal lipo battery

Product description

DJI goggles just got better-looking and more powerful so you can experience FPV racing in style and without traditional restraints DJI goggles racing edition (re) feature a redesigned metallic matte Black visor and headband along with padding covered by high-quality red leather Precisely engineered for racing DJI goggles re deliver both analog and digital video An OcuSync video transmission module and a high-performance Camera module work together to transmit digital video signal from up to 7 km away with latency as low as 50 MS Fly with smooth clear video and experience the thrill of drone racing like never before

• INCLUDES DJI Goggles Body Headband Pagoda Antenna (SMA Interface) Reversed SMA Connector Charger Wire Clip Micro USB Cable HDMI Cable and a Cleaning Cloth
• Compatible with DJI spark Mavic Phantom and inspire Series of drones
• Up to 50MS latency 12 channels available 2 4 and 5 8 GHz dual-band video transmission
• 1280x960 at 50 fps 1280x720 at 60 fps 640x480 at 50 fps
• 148° Field of view Global shutter sensor eliminates jell effect
• Video capture resolution: 2K

User questions & answers

Question:	Can you wear glasses with these goggles
Answer:	dear buyer, Yes, this drone will work with frsky taranis lite.
Question:	Will this model work with the mavic air
Answer:	No
Question:	Does using goggles affect distance drone can fly or is still the same as just using controller
Answer:	dear buyer, this is a built drone, you just need to bind it to your frsky radio controller,then make it fly. and please note: radio controller NOT included.
Question:	What's the difference in the racing version and the regular white one and both verses fatshark goggles? I have a mavic pro
Answer:	It's on the receiver not the flight controller. You will have to flip the quad upside down to see the bind button.

Product features

DJI Goggles Racing Edition 1080P HD Digital Video FPV Racing Goggles Drone World

DJI Goggles just got better looking and more powerful, so you can experience FPV racing in style and without traditional restraints. DJI Goggles Racing Edition (RE) feature a redesigned metallic matte black visor and headband, along with padding covered by high-quality red leather. Precisely engineered for racing, DJI Goggles RE are compatible with an OcuSync video transmission module and a high-performance camera module, which work together to transmit digital video signal from up to 7 km away with latency as low as 50 ms, in addition to analog signal.

OcuSync Video Transmission Module

DJI Goggles deliver FPV video with ultimate speed, stability, and clarity. The OcuSync Video Transmission Module offers 2.4 and 5.8 GHz dual-band digital video transmission with latency as low as 50 ms and a maximum control range of up to 7 km.

Equipped with an array of powerful features, such as 1280×960 HD transmission, and automatic Frequency-Hopping Spread Spectrum (FHSS) transmission, this module is compatible with a variety of multi-rotor and fixed-wing aircraft.

12 Selectable Transmission Channels

Access to low-interference transmission channels is the key to success for competitive FPV racing, especially when multiple drones are flying simultaneously. Manually choose from up to 12 transmission channels to effectively avoid interference.

Automatic FHSS Technology

When encountering wireless interference, the OcuSync Module will quickly and automatically switch between the 2.4 and 5.8 GHz channels to maintain unobstructed transmission.

Connect Two Pairs of DJI Goggles RE or an Extra Controller

With an extra pair of DJI Goggles,a spectator can experience the thrill of drone racing from the same perspective as the pilot. A seconduser can also view the pilot’s FPV from a smartphone with a Mavic Controller.

Product description

iFlight 2pcs 5V Buzzer Alarm with WS2812 LED 110 DBA Super Loud Programmable FPV Buzzer



Model: BZ110DB

Size: 27*14*11MM

Weight: 2.9g



Package Included

2 x fpv led buzzer

• Item Name: FPV quadcopter led buzzer 5v supply
• Super loud,the maximum sound can reach 110 DBA
• Supports most popular flight controller in the market, F3, F4, F7
• Comes with 4 Programmable WS2812 LEDs
• Mini Size: 27*14*11MM, only 2.9g / pc

User questions & answers

Question:	My LED does not light up, but buzzer is fully operational any suggestions
Answer:	YES! This is why I love the DJI goggles line. Finally excellent goggles AND glasses! ExcelRC
Question:	Do they produce a continuous sound or some beeping sound pattern
Answer:	Yes. I use it with my mavic air.
Question:	Only buzzer working. Im using a diata mamba f4 mk2 fc. Is there something i need to do to see the led in betaflight
Answer:	So far they haven't affected my distance. Once you fly with them you will always want to use them.
Question:	There is a red led blinking when 5v power is connected. i don't want this blinking led. can i desolder this led? a schematic diagram will help
Answer:	- Racing Edition adds use of DJI’s Ocusync Air system. Additionally purchased equipment can be mounted on any DJI or third-party drone, as well as any robot or RC. This gives massive flexibility, no matter what machines you want to incorporate with the goggles. - Racing Edition's adds an included Pagoda antenna, and RE can switch between digital and analog transmission for a multitude of applications and scenarios. Example, you can use these goggles beyond just DJI drones, like connecting to a 3rd party FPV drone or airplane with existing analog camera system. - Racing Edition adds capability to store digital video on a Micro SD card. Both DJI and analog footage. - Racing Edition supports local video playback and Sphere pano viewing, allowing users to turn their head to get a 360° view of the Sphere pano. - The original DJI Goggles have a latency of 110 ms. The DJI Goggles Racing Edition can get down to 50 ms. - Racing Edition has experienced some redesigning to make them more comfortable for users. The inside of the headband has been reinforced with leather to make it feel more padded. The facial pad has also been altered slightly to make it easier to wear. - Obviously color

Product description

BETAFPV BETAFPV Beta65S Frsky Whoop Drone 1S Brushed FPV Quadcopter with F4 FC SPI Frsky Receiver M01 AIO Camera 5.8G 25mW VTX 19000KV 7X16 Motor for Tiny Whoop FPV Racing

3 improvements based on Beta65 drones.

Motors: 6x15mm -> 7x16mm brushed motors

Frsky Receiver:F3 FC -> F4 FC SPI Frsky OSD - The latest BETAFPV F4 brushed FC has upgraded firmware to Betaflight 3.4.1, SPI Frsky D16(Default Configuration) connection works in this F4 flight controller.

Cam: Z01 Cam -> Z02 Cam M01 VTX 25mW- This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens.



Binding Procedure

The binding procedure is reversed as usual. No need to click the bind button when power on.

Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash.

The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter.

For detailed procedure of binding, please check the here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board



Specification

Wheelbase: 65mm

Weight: 25g (without battery)

Flight Controller: F4 Brushed FC SPI Frsky with OSD-UK: https://www.amazon.co.uk/dp/B07DMDZ1LH

Firmware Version: Betaflight MATEKF411RX 3.4.0

Motor: 7x16mm Coreless Brush Motor, 19000KV

Receiver: Frsky D16 potocol

Camera: M01 AIO Camera 5.8G 25mW VTX

Batterry: 300mAh 1S Lipo battery

Flight time: 3 minutes 30sseconds



Package Included:

1 * Beta65S BNF Frsky

2 * 300mAh 1S Lipo Battery

1 * Canopy for Micro Camera

1 * Carry-on bag

1 * Screwdriver

• 【Update】Beta65S with 7x16mm brushed motors has been upgraded F4 Brushed Frsky FC with M01 AIO Camera 5.8G VTX
• 【Motor&Props】More punch on throttle with faster 19000KV 7x16mm motors and 3-blade propellers. A great alternative to popular regular Tiny Whoop quadcopter
• 【Injection Molding Canopy】The latest Beta65S has been updated with the injection molding canopy which is more durable
• 【Binding】This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when powering on. https://betafpv.freshdesk.com/support/solutions/articles/27000021366
• 【Support】Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions. Any other problem feel free to contact: [email protected]

User questions & answers

Question:	is this a V1.1 FC
Answer:	Check your polarity (+/-), buzzer will work regardless of polarity, but LEDs will not.
Question:	Why does it not fly level, even after initializing on a perfectly level surface? It gets worse as I fly
Answer:	They beep the way the software tells it to beep. They light up the way the software tells them to light up. The software it uses depends on what you attach them to...... What are you trying to use them for? On a drone the flight controller software controls how they beep and light up.
Question:	Will you offer flysky version on Amazon
Answer:	You have to enable the LEDs then program them in betaflight. Not to difficult. Watch joshua Bardwell LED tutorial on YouTube. Search "Joshua Bardwell LED "
Question:	Is compatible with the transmitter Flysky fs-i
Answer:	dear buyer, there is a diagram ,please check the fifth image.

• 【BNF Brushless Whoop Drone 】3 inch small size toothpick carbon fiber drone but with tons of power for its size , the fastest more than you can imagine . Great 4S mini racing drone for newer .
• 【Stable and more protection 】3' brushless whoop drone with 2.5 inch propellers guards . Durable and light carbon fiber frame. Total 143g offers whoop a good balance of weight and nice punch on 3S 4S battery, which leads to awesome flying performance.
• 【4K NEW Camera】CADDX Tarsier 4K Camera , allows both a live FPV feed and an HD DVR, without the weight of a heavy HD action camera. The 4K brings many improvements over the original, including a new lens, audio, better mounting options, and a better image.
• 【Powerful picture transmission FD VTX Micro】 You can get the picture transmitted by the fastest picture, because its power can reach 400mW, and you can switch to meet your competitive needs!
• 【Note 】 A beginner needs to practice more in the DRL Simulator before flying out and this drone will not come with battery or remote controller.

User questions & answers

Question:	Is it possible to replace the Frsky receiver with a spektrum
Answer:	yes, it is the V1.1 frsky osd FC version
Question:	Is this racing drone compatable with radiolink at 9s
Answer:	hi, could you contact us and send the video to show the problem, so we can check for you
Question:	Does this drone have onboard recording
Answer:	No ,we won't have that one on Amazon, but you can try the FC without RX so you can install it as what you want : https://www.amazon.com/dp/B071LPK9FT
Question:	Would this bind to a Taranis X-lite transmitter
Answer:	No. This works with the taranis line of transmitters. To order a beta 65s with a flysky reciever, one must order from the betafpv website.

Product features

4K NEW Camera FPV Racing Drone

CADDX Tarsier 4K Camera , allows both a live FPV feed and an HD DVR, without the weight of a heavy HD action camera. The 4K brings many improvements over the original, including a new lens, audio, better mounting options, and a better image.

HGLRC F4 Zeus Flight Controller Stack

F4 Flight Controller AIO 15A 4 In 1 ESC

Betaflight OSD - 5V BEC, PDB - 16M Black Box - Support SBUS, PPM, DSM2, DSMX receiver

New FD1006 3800KV brushless motors

New FD1006 3800KV 3S-4S brushless motors , Stainless steel motor shaft , 1106 motors bell draw up cool air from base and through the coils as the motor spin up , higher efficiency and longer life .

Best gifted well-packged

Package Included: 1x Sector132 4K FPV Whoop Drone 6x Gemfan 2540 propeller 6x Gemfan 3035 propeller 1x Hammer Antenna

2x Battery Strip

• Note: We have upgraded the ARRIS X2205 V2 2300kv brushless motors to ARRIS AR2206 2450KV brushless motors, since Amazon has mixed the two versions stocks, we do not accept orders for the specific version, hope you can understand. Please contact us freely if you have any further questions.
• This is an ssembled RTF version, with Radiolink AT9S radio set and high quality 4S lipo battery. Each drone has been well-calibrated and pre-flied.
• The "X" symmetrical design makes the X220 V2 be light in weight, simple in structure, durable and agile.
• It is assembled with the latest Flycolor Raptor S-Tower, which has built-in BLHei-S 4-in-1 40A ESC, F4 flight Controller, PDB and OSD.
• Pre-assembled Foxeer Arrow Mini Pro FPV camera is the most popular fpv camera in the market, which works well in the fast change of the dark and bright environment.

User questions & answers

Question:	What goggles work with this drone
Answer:	Eashine ev 800 goggles work well but any 5.8 ghz goggles will work
Question:	Whats the estimated battery time
Answer:	8-12 minutes. It depends on how you fly and the quality of battery you use.
Question:	Does it come with a battery and charger
Answer:	Battery only no charger
Question:	Can I get this quad by itself? I don't need the controller
Answer:	Yes, please contact us through Amazon Message directly.

Product features

Flycolor Raptor S-Tower comes with BLHei-S 4-in-1 30A ESC, F4 Flight Controller,PDB and OSD.

The ESC comes with EFM8BB21F16G MCU, support Dshot / Multishot / Oneshot,support high KV motor, can support at most 500k eRPM.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.



The default firmware of the F4 is Betaflight_OMNIBUSF4SD,it supports PPM,SBUS,SPEKTRUM 1024/2048 etc. remote control / receiving mode. Built-in current meter, OSD directly display the real-time current without any additional connection.



With the tower on the ARRIS X220, the wires are tidy and concise. And it is more convenient to maintain in the future.

ARRIS X2205 V2 + Dalprop propeller

ARRIS X2205 V2 2300KV brsushless motor is high end brushless motor specially designed for high performance fpv racing drones.It adopts brand new M5 steel shaft, improving the structure strength. It had been upgraded to centrifugal fan design, optimizing the heat dissipation.It also adopts original Japan NSK bearing and N52 tile-shape magnets to ensure the power and quality of the motor.



DALPROP cyclones T5045C series propeller is newly released high end dynamic balanced prop for fpv racing drones.

The propeller is made of imported PC,the strength is high, and the root is thickened,which make the propeller is not easily broken. The smooth surface design on the prop decreased the windage resistance,increasing the efficiency of the propeller.

Foxeer Arrow Mini FPV Camera

The Foxeer Arrow Mini FPV Camera comes with excellent WDR, which works well in the fast change of the dark and bright environment, support 5-35V super wide voltage, and built-in microphone and FPV OSD.The angle of the camera is adjustable on the ARRIS X220.

ARRIS VT5804 Switchable VTX

ARRIS VT5804 48CH 0mw/25mw/100mw/200mw/400mw/600mw Switchable Video Transmitter.It has stable output power, long transmission range (0.5KM+@25mW; 1KM@200mW; 2KM+@600mW with stock antenna), 6 power switchable,Output power and frequency setting can be done in OSD interface through remote controller and it weighs only 6g, perfect for fpv racing quads.

Foxeer Pagoda Pro 5.8G Antenna

The body adopts imported PC+ABS material, can withstand high strenghth impact. Double-jacket semi-rigid cable for heavy impact resistance. Lower feeder loss, easy to install, can be bent at any angle and maintain.

Product description

Inside the package: Come ready to fly (RTF). Included devo7 controller, HD night vision camera 700TVL, 5.8ghz FPV video transmitter, OSD, 1 pc 14.4v 1300ma 4 cells lipo battery, lipo balance charger, USB data Cable. Additional Description: New arrival Walkera F210 - 3D Edition brings a big surprise of upgraded on-screen-display system, which can improve 5.8G real-time transmission and racing performance a lot. And, F210 - 3D compatible with Futaba receiver. Main Features: Bow and streamlined design, standard equidistant axis design The racer body is made of carbon fiber materials, plus a protective cover motor design, all makes the F210 series solid and anti-crash and its flight speed comparable to F1 racing. Upgraded OSD system Base on the OSD system of F210, that of F210 - 3D is upgraded. Now you will get more signs of functions unlock, low battery voltage, horizontal situation and wireless signal reception situation. SP racing F3D flight control F210 series is safe and anti-crash, easy to install and disassemble. With the latest F3 flight system, the professional speed controller and 5.8G image transmission, the players set the speed freely according to their needs. Night vision HD camera The camera has 700TVL horizontal resolution. Powerful motor design With brushless motor plus guard landing cushion frame design, the racing drone passed various rigorous reliability tests, which guarantee the racer's high quality and safe flight.

• F210 3D Edition Flip in 3D Aerobatic Mode
• Optimized receiver RX Response 5ms 4 times faster in speed
• Optimized flight controller parameter adjustable by phone
• Optimized OSD (Update lock/unlock, lower battery indicator, horizon line, signal alarm function)

User questions & answers

Question:	will I be able to use my fatshark altittude
Answer:	Yes i use fatshark dom v3
Question:	So from what i get you can switch out props to racing props, reconfigure the controls and it is the same as the non 3d modelother than colors
Answer:	Walkera f210 3D is an awesome extreme speed racing machine. With the 3D propellers (blue color), you can fly the racer in standard normal flying or in a continuous inverted flying. With the (orange/black colors) 2D propellers, you can fly it in normal standard flying. Thus, what ever types of propellers you mount on to the racer, you can still able to access the racing mode. This is why the walkera f210-3d edition is so unique and special to the racing world. NO OTHER RACERS out there, at the moment, will allow you to do these contineously inverted flight! I have posted a video on my listing "supaquad" and you will see how impressive this walkera f210 -3d edition performed.
Question:	Does this drone record a video
Answer:	Unfortunately. Drone doesn't record
Question:	what fpv antenna upgrade do you recommend for the f
Answer:	not sure where you are planning to travel with your f-210, but the stock antenna on mine worked great for further than i cared to fly that quad. amazing little machine it is.....but if you need to upgrade ANY antenna, check out IBCRAZY'S stuff for excellent results every time. he is very helpful in understanding what does what when it comes to antenna and he will tell u all about it on youtube

Product description

Goggles

• Performance: High definition, low latency, and highly immersive, with long-distance transmission capabilities
• Battery: Battery in the box supports up to 110 minutes of flight when fully charged
• In the Box: DJI FPV Goggles V2 (including the foam padding) ×1, DJI FPV Goggles Battery ×1, DJI FPV Goggles Power Cable (USB-C) ×1, DJI FPV Goggles Antenna (Dual Band) ×4, Headband ×1, USB-C Cable ×1, Sleeve ×1

• YOUR VERY OWN DRONE RACING KIT - set it up at home, the office or outside. Fly solo or multi player racing. Choose a fast drone race course or a technical course. Unleash your inner drone racer
• EASY TO BUILD - takes just a few minutes to build the racing drone kit. No extra parts required, they snap into place easily. Now you have your very own drone racing league just like drl racing
• PORTABLE - dismantle your drone obstacle course and take them to the park for drone games or a friend's house for a drone competition. Slide your drone racing parts straight back into the original box.
• PROTECT YOUR DRONE - This race drone kit is made from flexible plastic to protect your drone when you hit the hoops. It's much cheaper to replace an arm on the hoop than repair a broken drone. We include 2 spare arms per hoop.
• 12 MONTH WARRANTY - we look after our customers. Any issues, just message us and we will take care of it. Simple as that. All you need is a good drone for kids and you are ready to race!

User questions & answers

Question:	Hi Eagle Pro, do you know if/ when you will have this item back in stock? Thank you
Answer:	Good morning Lori , Thanks for your trust of HGLRC . Yes , my friend , this sector132 will work good with a spektrum 4650 if you need replace . Any question ,pls feel free to contact us .
Question:	Are these stable when used indoors on carpet
Answer:	This Sector132 4k 4s racing drone will come with Frsky XM+ receiver , so it can work with FrskyX9D/QX7 , but not compatable with radiolink at 9s , maybe you can change the receiver to R9DS receiver
Question:	To confirm, the 3 pack is
Answer:	Yes if you can figure out how to turn it on for recording. Off by default and have spent many hours searching and no instructions. No instructions for camera controller interface, can't find any reference to DVR anywhere. Not in OSD. You tube reviews never mention DVR. Plenty of buttons on the stack, what the hell do they do? One of the best quadcopters I have ever owned, why the secrecy, maybe a manual or a few notes. Good grief.
Question:	Is the competition the best time to go through the hoops
Answer:	Hello my friend , Thank you for your trust in HGLRC . Yes , This sector132 BNF fpv drone will come with Frsky XM+ receiver , it good to bind to Taranis X-lite transmitter Any question , pls feel free to contact us .

Product features

Let the Racing Begin

• Setup your very own drone racing course
• Indoor or outdoor flying
• At home, the office, at work or in your backyard
• Test your flying skills with the eagle pro obstacle course
• Choose a fast course or a more technical course - its up to you.
• 1-2 minutes to setup
• Comes with everything you need to start racing
• Family fun for all ages
• Choose the 3 pack for more course setup options.

Unlimited Options for Course Setups

• Unlimited options when it comes to course setups
• Fly single pilot or multi-pilot racing
• Technical course or fast racing
• Forgiving on your drone. Blade strike won't shatter your drone with our flexible plastic design
• Hard to imagine flying without the eagle pro obstacle course

Hoops Dimensions

• 25 inches wide which will accommodate drones up to 15 inches in width.
• Most drones will be compatible
• Product can be returned if your drone is not compatible.

Useful Benefits

• Fly indoor or outdoor
• Hoops are made from flexible plastic which saves you time on broken drone blades
• Hone your flying skills significantly.

Elevated Design

• Existing obstacle courses are based on the ground only. The eagle pro is elevated to enhance the flying experience.
• Eliminates ground effect by being elevated.

Product description

The tinyhawk RTF is a perfect FPV drone to start the hobby, it is easy to fly and made out of durable comnponents and plastics to ensure long lasting quality. With its 3 racing modes, you will learn how to fly FPV in no time. The controller is set up with 3 diffrent modes to help you get started, the right switch on the controller is porgrammed with Level mode, Horizon mode, and Full Acrobatic mode for full control. The RTF kit includes a lightweight and durable FPV goggles. No cellphone or wifi needed, as this is real FPV that will get you much further than wifi receivers. The goggles, controller and tinyhawk will be bound and will be ready to fly out of the box. The kit comes with 1 battery. 1 set of extra propellers, and a bag of spare crews and battery connecvtor. All in all it is a great beginners drone, that will get you started with FPV in the right, and affordable direction.



- Up to 4 minutes flight time on single battery

- Unique inverted motor design to keep CG as low as possible to fit in the smallest of spaces

- 25mw VTX and 600tvl Camera included for fun FPV flight via FPV style goggles

- Smart Audio function to change VTX channel via your transmitter - Pre-tuned from factory with expert pilots and new pilots in mind. 3 rate profile

settings for all types of flying feel

- Plug in type motors for easy maintenance

- 1s High Voltage (HV) 450mah lipo included

- Frsky compatible D8 receiver built in to FC

- Custom carbon fiber themed carrying case



The Ready-To-Fly kit includes the following:



1 x Tinyhawk FPV Racing Drone

1 x Light weight soft carry case, with carbon fiber look

1 x USB High Voltage capable 4 port USB Charger

1 x 1s High Voltage (HV) 450mah lipo battery

1 x FPV Goggles

1 x Transmitter

1 x USB Cable for charging goggle, radio

1 x Parts Bag

1 x Phillips screwdriver

2 x 18650 Battery already pre-installed

1 Set spare AVAN Tinyhawk 3 blade propellers.

• Kit in cludes FPV goggles, Controller and Tinyhawk drone, all ready to fly!
• Great for beginners! No extra gear needed to start flying!
• Real FPV, NOT WIFI. Up to 200 feet distance!
• Lightweight, durable, and fast! Up to 35mph!
• Easy to carry case, no need for a heavy backpack to carry all in one!

User questions & answers

Question:	Whats the biggest battery (mAh) that will work with this drone? Also, what size monitor (3" or 4") is the goggles
Answer:	The goggle screen is 4.25" and the drone will take up to 600mah 1s batteries, however it will feel heavier and might not flight properly. We recommend sticking to OEM 450mah batteries.
Question:	Advertised for indoor racing. is this easily blown around outside. are you all flying inside or outside
Answer:	Unit is fairly stable outside under low wind conditions
Question:	Can the googles be used with any other cameras. Or any other bnf fpv quads
Answer:	The googles can be used with any other drone.
Question:	Is this brushless
Answer:	Yes, this drone is brushless.

• 1.Nazgul5 V2 fpv racing drone bnf built with latest iFlight XL5 V5 fpv frame: popular true-X layout,5mm easy-swap arms ,360° full body TPU protection and antenna mounts
• 2.Built with the Tbs Crossfire Nano Rx,so you can bind our this drone to your TBS radio controller
• 3.Pre-tuned and freestyle setup, everything you need is just bind-and-fly
• 4.This 5inch analog fpv drone design for professional pilot,Recommended: 1300mah 6s lipo battery.
• 5.When you have any question,write to us,we will provide best customer service.

User questions & answers

Question:	This will work with the tbs tango 2 without modification
Answer:	dear buyer, this drone built with Crossfire nano RX,so it will bind with the tbs tango 2. just bind and fly. if you have any question,please feel free to contact us: [email protected]
Question:	Will it bind to radiolink at9s pro
Answer:	dear buyer, yes, this drone will bind to radiolink at9s pro.
Question:	What’s the Top speed
Answer:	hi,the speed is 150km/h.
Question:	Do I need the crossfire nano module for the radiomaster tx16 to bind
Answer:	dear buyer, this nazgul5 v2 drone come with crossfire nano rx,so you can just bind it to your radiomaster tx16.

Product features

iFlight Nazgul5 V2 5inch 6S Drone BNF Built with TBS Crossfire Nano Rx

Nazgul5 V2 is a 5inch size BNF (Bind-and-Fly) quadcopter. Weight: 393.4g (without battery).

it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly!

Loads of power and smooth flights , using our popular XING-E motors with long-lasting NSK bearings.

Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field.

Drone built with TBS Crossfire Nano Rx

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props

- 5" version also fits 5.1inch style propellers

- Popular True-X configuration

- TPU crash-guards

- Fits both 30.5x and 20x stacks

Built from XL5 V5 FPV frame

True X layout frame.

Wheelbase: 240mm*240mm.

Body size: 170*170mm.

Propeller size: 5 inch /5.1 inch.

5mm thickness arms.

Nazgul5 v2 6s fpv racing drone

Top quality carbon material.

360 degree TPU guard.

this drone suit for fpv professional pilot.

LED illuminated Logo"IF".

Easy-Swap arms.

LED illuminated Logo"IF".

Top mount and bottom mount battery .

Perfect suit for fpv professional pilot.

Caddx Ratel, 2.1mm lens camera.

with XING-E 2207 1800kv 6s fpv racing motor.

Perfect suit for fpv professional pilot.

SucceX-E F7 45A V2:

SucceX-E F7 45A V2 flight stack:

FC: SucceX-E F7 Flight controller.

ESC: SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC.

SucceX Force 5.8g 800mW VTX Adjustable VTX

25mW/200mW/400mW/800mW adjustable transmitter.

48ch channel.

Included Components and Parts

Prebuilt and tested Quadcopter

1x XL5 V5 Frame

1x Caddx Ratel, 2.1mm lens camera

1x RHCP SMA 5.8g antenna

2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)

1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)

1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Product description

iFlight TITAN XL5 HD 6S Drone adopt a new X-Geometry frame,

with the best performance on both axis and better weight distribution for freestyle. 



HIGHLIGHTS:

- 6mm arm design for more durability

- XING 2208 motors (6S 1800KV) for more power

- GPS pre-installed for more safety at distance

- 360° TPU protection and Antenna mounts



SPECS:

Frame-TITAN XL5

FPV Stack-SucceX-E F4 Stack (45A 4-in-1 ESC)：

SucceX-E F4 FC

- Input：2-6S（Max 8S）

- BEC：5V/2.5A cont

- Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex

SucceX-E 45A 4in1

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

- Target: G-H-30 BLS 16.7

VTX-SucceX Force 5.8GHz 800mW VTX Adjustable

Camera-Caddx ratel 2.1mm camera

Crossfire nano RX



Technical support:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our iFlight support article on iFlight site "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our iFlight support article on iFlight site "How to disable Angle-Mode, activate Acro-Mode"

- GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour.

Please check our iFlight support article on iFlight site "GPS Rescue Mode // Setup"



Pack list (Built and tested)

-1x  TITAN XL5 6S FPV Drone - BNF

- 2 sets Nazgul 5140 propellers

- 1x GPS Module



Suggested Parts (not included)

- 6S 1300mAh lipo battery

- Adjustable TPU mount (0-40°) for Gopro

• TITAN XL5 6s fpv racing drone BNF with GPS module for GPS rescue (NOT return to home)
• NEW X-Geometry frame to get the best performance for freestyle,6mm arms ,more durable,360° TPU protection and antenna mounts
• Built with Crossfire Nano RX for TBS ,can bind for TBS controller
• SucceX-E F4 45A Stack and our popular XING 2208 1800kv unibell motors
• Please read the manual careful before you fly this drone,you can also contact us at any time, we provide best customer service !