9 best model railroad accessories

Product description

The Lionelville Street Lamps are the perfect way to illuminate the quaint streets on your layout. These lamps feature removable bases that can press into holes in your layout for a realistic appearance.

• Metal posts
• Lamp Illumination
• Removable bases for realistic mounting on your layout
• Set of four

User questions & answers

Question:	What voltage do these run on
Answer:	I would recommend 14 volts, which many transformers have as their fixed voltage for accessories. You can hook them to a variable voltage post to dim or intensify them, but remember that the bulbs will have a longer life at the lower voltage.
Question:	What are they made of
Answer:	They are made of plastic and copper wire for the power.
Question:	Do I have to plug these into something or are the battery operated
Answer:	These lights are not battery operated; they must be powered with a step down transformer (such as a train transformer) from regular house current (110-120 volts) to an approximate 15-18 ac voltage. This unit is meant for a train layout--O gauge. Simply strip the wire on the loose end and place it around the binding post on the transformer terminal for the accessory. Usually the posts are labeled U,A,C,D. Find the combination voltages that total 15-18 volts by placing one wire on A and C first. Do not connect two wires to the same terminal. Plugging this accessory into house current will immediately burn out the light and may trip your house breaker.
Question:	How many volts do they operate on
Answer:	These are on my American Flyer layout using a 300 Watt transformer with a constant 15 volts to all accessories.

Product description

Features:

100% Brand new and high quality.Perfect for Railway & Building Layout!

Made with white LEDs.Complete with wires and LEDs and can be lighted.

This scale lamp is very helpful props for model train Layout and Architectural building,train station layout ,school project model and miniature dollhouse.

These Lampposts are suitable for use at supply voltages of 3V only.

DO NOT use them on 12V or 16V directely to avoid damaging the LED.You must connect a resistor in series before you will use them on 12V or 16V, I will supply compatible resistors for free.

Please apply correct Operating Current 20mA to each LED too.

Specifications:

Brand:evemodel.

Size: Adjustable height upto 80mm(+/-4mm).

Reference Scale: 1:87~1:120,Suitable for HO scale or TT scale etc....

Operating Voltage: 3V, AC or DC Compatible.

Operating Current: 20mA.

Material: Steel Column Model Lampposts.

Emitting color:Bright White.

Package included:

10 Complete lamps.

10 Resistors (not pre-soldered) for 9~18V operation.

• Size:Adjustable height upto 70mm(+/-4mm) or 2.76inch.
• Reference Scale: 1:87~1:120,Suitable for HO scale or TT scale etc....
• Emitting color: Bright White.
• Operating Voltage: 3V, AC or DC Compatible.Operating Current: 20mA.
• Material: Steel Column Model Lampposts.

User questions & answers

Question:	What resistor do I need to use these led lights? Is the resistor available on Amazon
Answer:	the resistor I believe you can get on amazon don't hook it to the acc terminal or the light will blow need small amp usually there is a panel with several connections you can hook them up to try ho train acc look under lights they should have a panel for the lights the panel hooks up to the acc terminal there is a reducer in panel so the light doesn't blow I think its called a reducer panel I hope this helps also find a hobby store near you see what they say
Question:	can these be used will woodland scenics power supply
Answer:	Anything above 3 volt you will need a resistor according to line voltage.
Question:	If I put all 10 in series do I still need a resistor if so just 1 or on all of them
Answer:	Always need a resistor no matter the voltage. Once a led hits its voltage of 3v the led will draw unlimited amps and burn out. For a 12 v DC system you will need 450 to 1000 ohm resistor.
Question:	Is the power source included or do i purchase separately
Answer:	No there is no power source. You have to purchase one.

Product description

Size: Approx. 5.2cm(H) or 2.05''(H) .

Reference Scale: 1:100~1:160,Suitable for TT scale or N scale etc....

Operating Voltage: 3V, AC or DC Compatible.

Operating Current: 20mA.

Material:Coppery Column Model Lampposts.

Emitting color: Warm White.



Package included:

10 Complete lamp.

10 Resistors (not pre-soldered) for 9~18V operation.

• Perfect for Railway & Building Layout!Made with white LEDs.
• Size: Approx. 5.2cm(H) or 2.05''(H) .
• Complete with wires and LEDs and can be lighted.
• These Lampposts are suitable for use at supply voltages of 3V only.
• DO NOT use them on 12V or 16V directely to avoid damaging the LED.

User questions & answers

Question:	Can these lamps be used with woodland scenics just plug system
Answer:	I use silicon non hardening adhesive.
Question:	How long are the lead wires
Answer:	An example would be to use them with a model train set, powered by either the DC or AC accessory power
Question:	What is the best way to attach the base to the train set board
Answer:	I am not sure but the box says:- speed controller with plug-in wiring
Question:	How do you turn them on
Answer:	Lionel may have an appropriate caboose, but you could also check the Bachmann website.
Question:	Does the dcc control the turnouts i mean the switches
Answer:	About 6 ft. by 31/2 ft.

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

This item includes: Cart x2(with material), Shovel x2, Cone x12, Road Block x8 Material: Plastic(PLA) Scale: HO / OO Scale

• This product is created by a 3D printer
• Just like most other 3D-printed products, when you look at it carefully you see the printing patterns, paint can be used to cover them if you don't want them visible
• If you would like to paint this product, acrylic paints are recommended
• This item includes all accessories shown in the pictures

User questions & answers

Question:	How tall in inches are the traffic cones
Answer:	Around 6 inches before the resistor is soldered to the positive side. Adding small wire to extend is easily done with soldering and use of a spare hand set up. They are fairly bright for a diorama setup

Product description

With the train crossing signal for railway you will make sure that the trains pass safely on the BRIO train track. Remember, you´re in charge of the light signal, which is an important job.

• Product includes - The Crossing Signal helps you make sure trains pass safely on your BRIO tracks. Lights up and comes with batteries included!
• Perfect for the creative toddler - Expand your budding train engineer's collection with a Crossing Signal toy train accessory. It’s a fun gift designed for ages 3 and up.
• Compatibility - As your child develops, so can their railway play as the Crossing Signal is compatible with all other BRIO railway toys.
• Develops important skills - Playing with train sets helps children to understand and learn about their environment in a fun way, and the train functions help improve a child’s spatial awareness and fine motor skills.
• Safe for your child - We conduct more than 1,000 safety tests a year to ensure that our products conform to all safety standards, and we take pride in developing toys that are completely safe for children to play with.

User questions & answers

Question:	How tall is this
Answer:	This is 5” tall
Question:	Does the train make train crossing bell sound
Answer:	no. it lights up. no sound.
Question:	does it have an alarm when flashing lights
Answer:	No it doesn’t it flashes 14 times then stops so you have to keep hitting the button for it to flash
Question:	Is it for baby’s or kids
Answer:	Both

Product features

BRIO World - 33862 Crossing Signal

Warning – a train is passing by! Push the button on the railway crossing sign, start the red blinking light and let the train pass safely by. Well done! Let’s do another round. You’re in charge of the light signal, which is an important job.

Product description

The 'water' for the fountain is removable, you can use your own material if you wish, Material: Plastic(PLA), The 'water' for the fountain is removable, you can use your own material if you wish, Scale: HO / OO Scale, Dimensions:Fountain: 66 x 66 x 50(H) mm / 2.60" x 2.60" x 1.97"

• This product is created by a 3D printer
• Just like most other 3D-printed products, when you look at it carefully you see the printing patterns, paint can be used to cover them if you don't want them visible
• If you would like to paint this product, acrylic paints are recommended
• This item includes all accessories shown in the pictures
• This item includes: Fountain, Bench x4, Trash Can x2, Notice Board x2, Direction Sign x4

Product description

Application of the model tree set:

Suit for building model, sand table model, model train tree, toy model, scene layout, landscape decoration materials or microlandschaft decorations, etc.

Specifications:

Product name: train model tree

Feature: well-arranged, flexible and easy use

Color: natural green

Material: flexible plastic

Size: approx. 1.36 - 6 inch/ 3.5 - 15 cm

Quantity: 36 pieces

Package: bag

Package contents:

36 x Model tree



Warm notice:

There may be some debris in the package, it is normal and please be sure you don't mind before purchase.

• MATERIAL: These railroad scenery model trees are made of plastic material, well workmanship, flexible and durable for using.
• QUANTITY: Come with 36 pieces mixed sizes of model trees in natural green, enough quantities of artificial trees for DIY landscape accessories.
• SIZE: Mixed model trees are approx: 1.36 - 6 inch (3.5 - 15 cm) in size, and these model trees also suitable for miniature garden decor.
• COLOR: Green and brown.
• APPLICATION: This model tree set could be widely applied as train railway model tree, architecture trees, diorama, ho scale tree, building model, scene layout or landscape decorations, etc.

User questions & answers

Question:	Can these trees serve as decent scatter terrain for D&D
Answer:	I don’t know much about Dungeons and Dragons but the trees will not stand by themselves. They have to be glued in place. I hope this helps
Question:	can these be used in aquariums
Answer:	Definitely not, the trees are made with a foam that flakes off with even mild handling (this is really normal for miniature trees, I don't count that against them). They are best used for dioramas and wargaming, things of that nature—where the foam falling off doesn't hurt anything.
Question:	Could I attach these to Legos
Answer:	If you glued them.
Question:	Can these be used for cake decorating
Answer:	I think they can be used to decorate a cake, although they might shed a little as the tiny green can fall off if touched too much.

Product description

Dimensions(Barn): 107 mm x 62 mm x 50 mm(H) Dimensions(Fencing Area): 125 mm x 82 mm

• This product is created by a 3D printer, this product is unpainted in its original color as pictured
• For technical and safe transporting reason, the product may come with a very thin sheet below it or a support structure which connects to it on some points (please check the last picture), You may have to remove the product with a cutter(just like you remove the parts from a sprue in a model kit).
• This item includes: Barn, Fencing, Hitching Post, Whetstone, Carpenter Workbench, Hay Roll, Horse x4, Grass Mat(250 mm x 250 mm)
• Material: PLA & Resin
• Scale: N Scale / 1:160

User questions & answers

Question:	What gauge is the wire
Answer:	They don’t really flash. They rotate through a color pallet.
Question:	Will they work on 18 Volts dc
Answer:	Yes, you have to purchase them. I bought ,red, white, green, Amber, and blue 12 volt, and I bought the multi color changing lights also.
Question:	How do you choose between quick flashing and slow flashing
Answer:	They would be too small by half considering O guage train size. Thank you.
Question:	I need these lights to stay at a solid color when in use, are there any color lights like these that do not rotate or flash through a color pallet
Answer:	What kind of miniatures are we talking about? An item that measures 28mm is equal to 1.1 inches. The trees range in size from 0.79 inches to 6.5 inches in height. I'm sure there is a tree or trees in the 32pc assortment that should work for you.
Question:	Would these trees be suitable for a 1:48 dollhouse or an "0" Gauge train setup
Answer:	I believe they are for N-Scale. I planned to use them for HOand they are too small
Question:	Will these work with 28mm miniatures? Thanks
Answer:	I made bases out of sculpey. Textured them, added rocks, made holes for the trees, and baked them. Painted, glued trees in, and they make pretty decent terrain pieces that way and the heavy sculpey base prevents them from falling over when players bump the table on accident.
Question:	Are these tree suitable for an N-Scale model train layout
Answer:	They are 5/16" tall. Also, they are solid so you won't be able to stack them like real traffic cones. You'll probably want a sprue cutter or similar item to cut them apart. Have fun scraping off the residual plastic threads leftover from the 3D printing process!
Question:	What bases would be compatible for these trees? I need them for a flat table as D&D terrain
Answer:	i am not sure. They come with a tinned end only, so you will have to put on a plug like thiers

Product description

Features:

This tiny plastic people is very helpful props for model train Layout and Architectural building,train station layout ,school project model and miniature dollhouse.

100% Brand new and high quality.

These model figures look very real.

Features:

Brand:Evemodel.

Size:Approx.35mm(H) or 1.38''(H),as the picture shows.

Scale:1:50,Suitable for O Scale.

Material: Plasic.

Color:Assorted Colour.

Package included:50pcs painted figures,including about 13 different style.

• This tiny plastic people is very helpful props for model train Layout and Architectural building,train station layout ,school project model and miniature dollhouse.
• These model figures look very real.
• Size:Approx. 35mm(H) or 1.38''(H),as the picture shows.
• Scale:1:50,Suitable for O Scale.Material: Plasic.Color:Assorted Colour.
• Package included: 50pcs painted figures,about 13 different poses.

User questions & answers

Question:	Why are they all white
Answer:	they aren't all white, they are painted, just as shown in the picture.
Question:	Approximately how many seated figures come in the package
Answer:	The assortment i received had slightly over half of the figures seated.
Question:	Cant find "S scale" or 1/64 scale for a diorama
Answer:	Sorry,we don't have it.
Question:	what is the difference between the 100 and the 50 piece set
Answer:	They are different in quantity but the same in style.