13 best sand for model kits

Product description

A multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstick inserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting1/24 scale cars. The width of clips can also be adjusted to obtain the most stable hold.Can be used with Model Painting BoothsBoth body and turntable stands can be used with separately sold painting booths available at model hobby shops and art stores. By using these items, you can make your painting sessions easier by leaving your hands free.

• Highly accurate static display model.

User questions & answers

Question:	Would this stand be suitable for painting 1/18 scale diecast car bodies? These bodies are much heavier, wondering if the clips can hold it up
Answer:	This unit comes in two separate stands one of those stands is set-up for a car bodies, it's designed uphold the body with metal springs I think that it should hold, I assume this body is under a pound if it over in the wood model shipping industry there are hold devices that are designed for more weigh or even model trains having devices that are designed for more weigh. If that fails vices that are various sizes can be found at Harbor Freight or even on Amazon.
Question:	Can you say what is the diameter of the top and bottom platforms and the height of the pedestal
Answer:	Both stands at the bottom are 4 5/8 in diameter and the wider stand is 6 1/4, the body stand at the top is 3 1/4 by 2 inches, hope that helps great stands for any type of model, been using mine for a couple of tanks I've done
Question:	Will this stand also hold objects secure enough to paint with a brush
Answer:	It should. I have done some painting with a brush and it seemed ok. I have done most of my painting using the stand with an air brush.
Question:	Does it spin
Answer:	It does spin

Product description

A new Type of action base for 1/100 models that comes with unobtrusive base arms and can display all kinds of poses, including standing and action poses. The action base 4 will include a long base arm and 3 bases. Sub-arms can be used to hold weapons and other accessories. Compatible with figure-rise effect parts and action base 5 to connect multiple stands together like a chain!

• 1/100 action base has a completely new joint system in the arms, giving you a wider array of posing and display combination possibilities than ever before
• An accessory support arm is also included to hold up any larger weapons!

User questions & answers

Question:	Are these compatible with High Grades
Answer:	Yes, HG, RG, RE MG are all compatible.
Question:	how many arms does this come with
Answer:	Technically 2 but they form one long armature.
Question:	Can this hold the master grade re-gz with the back weapon on (the airplane module
Answer:	More than likely though one might want to split it into two armatures just in case, depending on the weight. I do believe that only the severely large and heavy kits (ex. Sazabi, hi nu, ZZ, and the like) would strain the armature. Hope this helps.
Question:	work for PG
Answer:	Can barely support the weight of the MG Nu ver ka so I dont think so

Product description

Bandai Hobby stand. Look for origin of shipment: Only items shipped from within North America are being sold by authorized U.S. Retailers. The product box will have a Bluefin / Bandai Namco warning label, which is proof that you are purchasing an officially licensed Bandai product, distributed by its sole and authorized distributor (Bluefin ) for the U.S. Markets. This product has been thoroughly tested for safety and meets all North American consumer product safety regulations. The affixed label also entitles the purchaser to product support assistance within the United States.

From the Manufacturer

A display stand for holding 1/144 scale Gundam models, includes various adapters and holders to fit almost any 1/144 Gundam kit! Assembles just like building a Gundam model itself! Larger 1/144 model kits may require the larger Action Base 1 for 1/100 models.

• Instruction manual x1
• No glue required
• Color coded no paint required
• Only product with affixed official Bluefin and Bandai Namco label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance

User questions & answers

Question:	Does it stand up pretty well? Our problem is keeping the models standing. Maybe anchor it with velcro or command strips
Answer:	Assuming you are going to use this for a 1/144 scale Gundam model, then as long as you don't set the arm of the base at some super crazy angle you should have no problem at all keeping the model on the stand to stay upright. I've posed my Gundam is many different poses and have never had any problems.
Question:	Does this fit a zoid
Answer:	Yes, it does. I have Zoids and Gundam. I would recommend the larger version, though, for larger Zoids to give them more stability, but this should work fine for smaller HMM kits like Pteras and Gun Sniper (Gun Sniper does not have a hole, but you can still support it with one of the other heads provided)
Question:	Can you put this on any Gunpla? Or is it just for Gundam
Answer:	Pretty much any Gunpla is compatible with it; it has multiple adapters for different types of kits, so anything of 1/144 scale will work. Some kits are gonna be a bit too big, though, but those are small in number.
Question:	Will this work for the upcoming Pacific Rim models
Answer:	Yes. I have seen reviews for the HG (1/144) PR models coming out they will feature a connection for this action base. That's a nice perk having Bandai make them. If the model is 1/100 then you'd want a action base 1.

Product features

About Bandai Hobby

Designed in Japan, these fun snap together model kits require no glue and are color molded, minimizing the use of paint for an accurate and dynamic model! Find GunPla (Gundam Models), Figure-rise, Star Wars Plastic Models, PokePla, and more here!

Product description

Long-tailed Alligator Clips require no assembly, and each one comes with rubber cover.



The stand base is made of plastic, but it has good weight to provide stable support for model parts.



Very convenient for hold and position small parts for airbrushing, you can paint either a decent sized model or many smaller items at one time.



Best gift for miniature model building enthusiasts who need to do lots of airbrushing of models.



Package Include: 2 pcs Painting Stand Bases and 40 x Alligator Clips (with rubber cover).

• Long-tailed Alligator Clips require no assembly, and each one comes with rubber cover.
• The stand base is made of plastic, but it has good weight to provide stable support for model parts.
• Very convenient for hold and position small parts for airbrushing, you can paint either a decent sized model or many smaller items at one time.
• Best gift for miniature model building enthusiasts who need to do lots of airbrushing of models.
• Package Include: 2 pcs Painting Stand Bases and 40 x Alligator Clips (with rubber cover).

User questions & answers

Question:	Do the stems bend
Answer:	They flex a little but not much.
Question:	What’s the size of the clips and the tails
Answer:	Not entirely sure how to answer. They are standard alligator clip sized. The sticks are about six inches long. But, they come in super handy for drying parts.
Question:	Where can I get more rubber covers
Answer:	You could try liquid electrical tape or a can of plastidip (not the spray kind)
Question:	Are the sticks flexible
Answer:	The sticks are pretty rigid, kind of like the support rods of a kite.

Product description

New Patented VESA adapter for mounting iMac computer STAND-MACB from VIVO. Our patented adapter simply clamps to the stock iMac base, and will fit any VESA 75x75 or 100x100 stand or wall mount. Our unique adapter ring system makes it compatible with any 21.5" and 27" iMac from late 2009 to current including the new 5k Retina Display. The heavy duty steel construction will make sure your iMac is safely supported at all times. The metallic aluminum color helps it better match the look of Apple's computers, giving you a setup that is both attractive and functional. STAND-MACB VESA adapter is a simple, affordable, and reliable solution to mount your iMac.



- Note this is for VESA adapter kit only, VESA mount/stand is sold separately.



*Patented!*



Compatibility

VESA adapter kit for Apple iMac (75x75mm or 100x100mm)

Supports 21.5" and 27" iMac displays

Compatible with late 2009 to current models (Including New 5K Retina Display)



Features

VESA Adapter (75x75mm or 100x100mm)

Unique adapter system

Metallic aluminum color

Steel material

• Compatibility - Patented VESA adapter kit for Apple iMac (Compatible with 21.5” and 27” displays only!) Compatible with late 2009 to current models (Including New 5K Retina Display)
• Design - Adapter is intended for Apple iMac. Designed to hold the weight and scale of an iMac display, and for stands with 75x75mm or 100x100mm mounting patterns
• Composition - Made of steel with a metallic aluminum color. Weighs only 1.6 pounds
• Easy Installation - Uses a unique patented adapter ring system. Comes with screws, washers, etc. needed to properly install
• We've Got You Covered - Sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns

User questions & answers

Question:	Can this mount adaptor lower the screen display or just raise it
Answer:	Hello, Thank you for your interest! Yes, this stand will fit 4 27" curved monitors. Thank you! VIVO Customer Support
Question:	Will this work for the new 2020 iMac
Answer:	Hello Christian, Thank you for your interest! Yes, the arms can be mounted with the three mounts on top and one on the bottom. Thank you, VIVO Customer Support
Question:	I'm trying to mount my 27" imac (late 2013) but the stand that comes with the imac isn't sturdy enough and it droops down. how can i fix this
Answer:	Hello, Thank you for your question. The closest distance would be about 5". Please let us know if you have further questions. Thank you!
Question:	Does this fit the 2019 new iMacs? I’m seeing reviews that says it doesn’t
Answer:	To be completely honest, I regret buying this. I have to lean my head back very far to look at this. The vesa connectors are short so unless you have an extender, you will be straining your neck to look up often.

Product features

Compatibility

• VESA adapter kit for Apple iMac (75x75mm or 100x100mm)
• Supports 21.5" and 27" iMac displays
• Compatible with late 2009 to current models (Including New 5K Retina Display)

Features

• VESA Adapter (75x75mm or 100x100mm)
• Unique patented adapter system
• Metallic aluminum finish
• Sturdy steel construction

Product description

Aftermarket 100% Brand New

Color:Black(As prictures shown)

Material:Metal+Aluminum+Stainless steel

This item can be bolt on in minutes and use a linear actuator to raise and lower the legs electronically. 

Two Aluminum legs provide a very sturdy base,and allowing the motorcycle to sit upright while parked.

No Installation Instructions.

Note: 

CAN NOT Fit With The Cross-Under Exhaust Pipes.

Before you buy,please check this part to make sure it can fit your motorcycle or not.

Fitment:

Fit For Harley Touring Models 2017-2020

PACKAGE INCLUDED:

1 x Center Stand(As prictures shown)

• Aftermarket Parts 100% Brand New
• Material:Metal+Aluminum+Stainless steel
• Package included : 1 x Electric Center Stand Kit
• Fitment：fits for Harley Davidson Touring 2017-2020
• With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence

Product description

The Ernst Manufacturing ultra stand is a durable, long-lasting work stand designed to safely hold your model while building or maintaining it. The stand will hold most planes from a park flyer-size model up to about a.60 Sport or trainer. Constructed of Lightweight, sturdy plastic, The Ultra stand is fuel proof and not affected by paint or adhesives. Removable cradles push-fit into base and feature adhesive-backed foam rubber padding to protect your model. Measures 9.5 by 18 by 11.5 inches.

• Model airplane stand safely holds your plane during assembly and maintenance
• Includes foam rubber padding to protect your paint or coating
• Constructed of lightweight, sturdy plastic and is fuel proof
• Removable cradles push-fit into base; features two tool compartments
• Measures 9.5 by 18 by 11.5 inches

User questions & answers

Question:	what is the width of the uprights
Answer:	Uprights are 9 inches wide virtually any plane other than giant scale will work well with this stand fantastic product.
Question:	can you tell me the dimensions of this stand please
Answer:	It actually measures 18.1 x 9.5 x 11.
Question:	Which scale can I use this display stand
Answer:	I’m not sure what scale you can use this stand. The uprights are 14 1/2” apart on center and 5 1/2” wide at the top. They are about 4” deep at the lowest point.
Question:	Will tbis hold my apprentice 15e
Answer:	It holds my Apprentice. Not perfectly, but it works. This stand is for smaller models like the Apprentice. You will find that for larger sixty size aircraft, it is too small.

Product description

LINK-AND-LENGTH TRACK - PLASTIC MESH - SUPER DECALS FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET FIGURE NOT INCLUDED The M-60 was introduced in the first years of ‘60s in the United States Army. It was developed and designed to be the evolution of the famous tanks M-47 and M-48 Patton series. The M-60 became the most important MBT (Main Battle Tank) of the U.S. Army during the Cold War years. It was produced, until 1983, by the American company Chrysler in 15.000 units and it was adopted, in several versions, by the armed forces of numerous countries all over the World. The main armament, installed in the turret, was the 105 mm. M68 gun. The M-60 was characterized by its big size and by the adoption of the powerful V12 turbodiesel engine able to release a good operating performance and a good speed on-road and off-road. It was deployed in a lot of conflicts and operational scenarios. In 1976 the new upgraded M60A3 version was developed and it was characterized by several improvement able to enhance the operation effectiveness. The armor protection for the turret was increased and a new gun mantle was designed. Great improvement in the adoption of modern electronic and fire control systems on board.

• 1:35 Scale Plastic Model Kit.
• Required assembly and painting.
• Glue and Paints are not included.
• LINK-AND-LENGTH TRACK - PLASTIC MESH - SUPER DECALS FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET FIGURE NOT INCLUDED

Product description

Rustark 19Pcs Gundam Modeler Basic Tools Craft Set Hobby Building Tools kit for Professional Model Assemble Building.



Package Include:

1Pcs x Trimmer pen

1Pcs x 10Pcs spare blade

1Pcs x Cutting pliers

1Pcs x Parts separator

1Pcs x Steel ruler

1Pcs x Cutting mat

1Pcs x Grinder

1Pcs x Grinding head

1Pcs x Polishing cloth

2Pcs x Tweezers

2Pcs x Screwdriver

3Pcs x Double-sided Polished bar

3Pcs x Manual file



Note:

Because the Modeler Basic Tools are very shape, so please use with care, and take they away from children.

• ✔ APPLICATION: The modeler basic tools set is suitable for a beginner and advanced modeler as well. You can use it to manufacture toys, cars, robots, cartoon, and other crafts.
• ✔FULL RANGE & COST EFFICIENT: Packing includes 1 x trimmer pen & spare blade ; 1Pcs x 10Pcs spare blade; 1 x cutting pliers; 1 x parts separator; 1 x ruler; 1 x cutting mat; 1 x grinder & 1x grinding head; 2 x tweezers; 2 x screwdriver; 3 x double-sided polished bar; 3 x model tools file; 1 x polishing cloth. And the items are protected by a plastic box in case of damage. Meet all beginner basic requirements.
• ✔ DURABLE: Trimmer pen is tightly clamped and has high hardness, plastic handle, and anti-skid design. With safety protection cap to protect blade. The cutting pliers is made of carbon steels, good durability. The tweezers are made of high strength stainless steel, anti-static, anti-acid, anti-corrosion and anti-magnetic. Other items also have high quality.
• ✔ LIGHTWEIGHT & PORTABLE: Model tools are lightweight and portable. When you use them, you will feel more handy. Packaged in plastic box and a waterproof bag, easy to carry, you can carve your products anytime and anywhere. Looking forward to your masterpiece.
• ✔ GREAT GIFTS: If you have an friend like animation, cartoon, and model very much, or she or he is a beginners of model, you can present this modeler tools set as a gift to your friends directly, or use the model tools to create a gift for your cherished friend. After accepting your unique surprise, your friend must have tears in his eyes. Your unique gift stands for your unique love!

User questions & answers

Question:	How big is the cutting mat? Bigger that the other kit set that’s is less expensive
Answer:	Since I did buy the less expensive kit, I can not know the size of it. This kit is 12 by 8.5 inches.

Product description

The transient Gundam from the "Gundam build fighters" series re-appears in a special side story with new load out and appearance!  numerous translucent parts are utilized to recreate this unique form.  includes 2 lances, and special clear display stand.  Runner x 8, sticker.

• Numerous translucent parts are utilized to recreate this unique form.  includes 2 Lances, and special clear display stand. 
• Runner x 8, sticker.
• Product size: approx. 5" tall
• Product bears official Bluefin Distribution logo

User questions & answers

Question:	Dose this one come with a stand at all
Answer:	Yes. A v base stand is included in the kit.
Question:	Are there 2 styles? One looks like it has green armor and another looks black. What color is it
Answer:	More like purple. At least the one that I have
Question:	Is it preassembled
Answer:	No.
Question:	Do you have to have tools to bulid this? Or will just clippers be enough
Answer:	Clippers should be fine if you want just a basic build without detailing. I would recommend getting at least like a box cutter or xacto blade to help remove the stubs. Or you can sand it down with sand paper but it takes longer and if not used right you can damage the parts severely.

Product description

A type of action base for 1/144 models that comes with unobtrusive base arms and can display all kinds of poses, including standing and action poses. The Action Base 5 will include a long base arm and 1 base. Sub-arms can be used to hold weapons and other accessories. Compatible with figure-rise effect parts and Action Base 4 to connect multiple stands together like a chain! Runner x 2 Other Action Base variants include:

• Sub-arms can be used to hold weapons and other accessories
• Compatible with figure-rise effect parts and Action Base 4

User questions & answers

Question:	Does this work with transformers
Answer:	I have a few masterpiece TF and the two are not compatible unless you know how to customize the base
Question:	dose this work with dragon ball model kits
Answer:	It should, several product images for the figure-rise kits are shown with earlier action bases. This action base has a generic “around the waist” holder to use.
Question:	does this work with RG
Answer:	Yes. All 1/144 scale gunpla work with this action base. It can also hold some 1/100 scale but I do not recommend.
Question:	Can this base work with 1/144 and 1/100 scale gunpla
Answer:	It does. I have several that I have used with 1/100 Gundam kits. One base will fit one 1/100 scale kit, or two 1/144 kits in a nice action pose.

Product description

Bandai Hobby stand

From the Manufacturer

A display stand for holding 1/100 scale Gundam models, includes various adapters and holders to fit almost any Gundam kit! Assembles just like building a Gundam model itself!

• package dimensions :25.0 cm L x 20.0 cm W x 5.0 cm H
• Product type :TOYS AND GAMES
• country of origin : Japan
• Skill level: Intermediate

User questions & answers

Question:	Do these work with figure rise models
Answer:	Yes, a port to hold the figure on base is included in that kit
Question:	Will this work for SD Models? If not can I have a link to a stand for one
Answer:	These base works on many models. They come with ends thats adjustable to many sets.
Question:	Would this work for hmm zoids kits
Answer:	never got any, but I'm sure you can just find a fitting point, it comes multiple adapters.
Question:	Will this work for a MG 1/100 model
Answer:	Yes it will

• ✅【Multiple Lens Desktop Magnifier】♥♥ One large main magnifying lens and two interchangeable magnifying lenses: 2.5X 90mm (diameter), 7.5X 34mm, 10X 34mm. Useful auxiliary tool in the soldering and modeling field. With interchangeable magnification, the two auxiliary lenses are stretchable and angle-adjustable, a great tool for soldering iron.
• ✅【Convenient To Use】♥♥ Desktop magnifier is an Ideal tool when the third hand is required. This product is installed with a stretchable small lens, with a choice of different magnification during operation, making operation more comfortable. Three kinds of different stretchable gears are available to increase the range of visual fields.
• ✅【Humanization Design】♥♥ An independent bright illuminating light with 5pcs of LEDs is installed on a flexible metal tube. Distance and angle of lights can be adjusted freely, what's more, the support clamps and alligator clips are adjustable, so you can feel more convenient and comfortable when you use it. This magnifier can be used separately as a desk lamp.
• ✅【Good Helping Hands】♥♥ The base surface is padded with a steel sheet to increase base weight and reinforce stability. Great for hobbyists, electricians, jewelers, and users who work with solder or small details. Power supply by external adapter or 3 * AA batteries (Not Included). Pull out the plug of external power if batteries are used for lighting.
• ✅【Application Range】♥♥ Hand Lens Close Work includes PCB soldering, Macro Photography, Fix Tiny Screws On Glasses, Craftsmanship Engraving, Electric Circuit Board Repairs, Building Models, Hobby Arts & Crafts Projects, Painting Miniatures, Splinter removal, Needlepoint Work, Sawing Applications, Diamond/Jewelry Cleaning, etc.

User questions & answers

Question:	In advance, if i missed this, i apologize for the repetition. How well to the clamos work in keeping the adjustments tight? So the top doesnt slide
Answer:	It works great for what I need it for wires and boards hope this helps

Product features

Versatile Helping Hands Magnifier

The multifunctional magnifier is specially designed for soldering, building models, electronic repair, DIY projects, jewelry, hobbies and crafts.

Magnifying lens station with the alligator clips and adjustable holder, you can relax your tired hands and work more efficiently by magnifying the items.

Features:

• Material : ABS + metal + glass lens
• 3 Lens Size: 2.5 x 90mm / 7.5 x 34mm / 10 x 34mm
• Power Source: 3 x AA batteries(Not Included) / charger adapter
• Power Input: AC100 - 250V, 50 / 60Hz
• Power Output: DC 4.8V, 500mA
• Base Dimensions(L x W x H): 96 x 65 x 22mm
• Product Weight: 1.1lb/520g
• Application: Electronic welding / model/ stamp collecting / cell phone boards/embroidery / antiques / biological observation

5 Bright LEDs Illumination Light Up Items While Magnify In Dark

• An bright with 5 LED illuminating light is installed on flexible metal tube, distance and angle of lights can be adjusted freely.

• The light is stable and reliable,no flicker,no effect on vision. It can be also used as a desk lamp. Power and brightness appropriate.

2.5X 7.5X 10X LED Light Helping Hands Magnifier Soldering Station

• Dual combination of magnification and illumination makes the observation clearer and more detailed.
• The auxiliary detachable small lens is connected by a retractable buckle. It can satisfy your needs for magnifying the most details of any project.

Magnifying Lens

Alligator Clips + Tools Basket

Battery Holder

External Power