14 best gas welders

Product description

"Features: - Easy to Use and Convenient to Carry - Powerful and Rugged MIG Welding Machine up to 130 Amp Output - Nice Machine Appearance and Screen Printing - Anti-corrosion & Water Resistant Metal Machine Case - Easy to Read the Numbers of Scale - Test Data Supports Stable Performance and Output Voltage - Protects Components and Transformer from Corrosion and Damage - Adjustable Welding Speed up to 6.7m per Minute - Supports Dual Voltage 110V/220V, Wire Feeder 24V - Accepts 0.6-0.8mm Flux-Cored Wire - 0.7KVA/1.8KVA Maximum and Minimum Power - 2mm of Maximum Thickness of Metal - Allows to Weld Steel and Aluminum up to 0.08 inch Plate Steel - Automatically Adjust the Inverter Pulse Width through Closed-Loop Control to Ensure the Output Stability - 60% Rated Duty Cycle, Basically can Meet the Durable Welding - Welding can be done by Connecting the Carbon Dioxide Gas - Suitable for Indoor Work What's in the Box: - Welding Machine - Welding Gun - Ground Wire Clip (1.6meters) - Brush - Protective Mask - 2.5m 1.8m Big USA Plug - Power Adapter Technical Specs: - Construction Material: Metal - Power Supply: 110V/220V (13A Power Adapter) - Maximum Input Current: 110V/43.1A, 220V/21.5A - Frequency Response: 50/60Hz - Rated Input Power: 8.1KVA - Current & Voltage Adjustment Range (MIG, A/V) : (50A/16.5V-130A/20.5V) - 25?60% Utilization Factor Output (MIG, A/V): (130A/20.5V) - 40?100% Utilization Factor Output (MIG, A/V) :(100A/19V) - No-load Voltage: 42V - Usable Wire: 0.2''-0.3'' -inch - Wire Feed Rate: 3-15m/min - Power Factor: 0.73 - Efficiency: 85% - Shell Protective Grade: IP21S - Insulation Grade: F - Welding Output: 60-125A,AC - Capacity: 18 gauge (0.039"") to 3/16"" (0.24"") mild steel only - Not for welding aluminum - Duty Cycle: 20% @ 90 A - Open Circuit Voltage: 30V - 2.67KVA - Welder Tips / Wire Size Installed tip will accept 0.031"" Flux-Core wire - Wire Spool Capacity: 2.2 lbs. Spool - Recommended Circuit Breaker: 30A time-delay (slow-blow) breaker (30A for maximum performance) - Extension Cord Recommendations: 3 conductor #12A or larger up to 5.91 ft. - Generator Requirements: Minimum 4,000W continuous output with no low-idle function (or low-idle off) - Product Dimension (L x W x H): 15.7'' x 6.7'' x 11.8'' -inches"

• 60% RATED DUTY CYCLE: The SereneLife Digital MIG Welding Machine features 60% rated duty cycle which allows you to weld for six minutes then rest for four minutes. Uses 0.6-0.8mm flux-cored wire. Perfect for entry level and professional welders
• UP TO 0.08” PLATE STEEL: This powerful & rugged MIG welder machine features up to 130 Amp output that allows you to weld steel & aluminum up to 0.08” plate steel. Supports dual voltage 110V/220V, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power
• ANTI-CORROSION MACHINE CASE: The handy MIG welder features anti-corrosion and water resistant metal machine case w/ nice machine appearance and screen printing. Protects components and transformer from corrosion and damage
• ADJUSTABLE SPEED: Adjust speed up to 6.7m per minute so you can dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability
• PORTABLE DESIGN: The multipurpose welder features a convenient carry handle, easy for transport & storage. Very convenient, can be used anywhere you need. Includes welding gun, ground wire clip (1.6m), brush, protective mask & 2.5m²1.8m Big USA Plug

User questions & answers

Question:	My generator has a 120/240 plug will it work of that
Answer:	I purchased the Weldpro mainly due to it's duel voltage, I have a Lincoln 125 mig that does a superior job at 110 vac. I keep the Weldpro on the same cart set up for Arc and Tig welding. So I can't help you with any upgrades.
Question:	My generator has a 120/ 240 plug. Can the slmigwl 140 run of that
Answer:	Yes. The welder takes the small 1-2 lb. 4" spools as well as the medium10-12 lb. 8" spools w adapter. However, it will not take the large 40-44 lb. 12" spools.
Question:	Can it weld 1/8 to 1/4 inch mild steel
Answer:	Hi! Chase, check the case where the wire spool is and press the Trigger in the Gun to see if turn? if it is and feeding the wire check the feeder wheels cuz they have differ grooves for the size of the wire you are using! I hope this help. I have not using mine yet but I work with Welders (Wire feed and Stick weld) Good luck
Question:	What type of gas do you use for this welder
Answer:	Smallest you can get away with in MIG mode is 19 Gauge...and you have to move quick. Otherwise...you're looking at TIG which this machine does pretty well...can easily get down to 25.

Product features

Inverter MIG Welding Machine

The SereneLife Digital MIG Welding Machine features a 60% rated duty cycle which allows you to weld for six minutes then rest for four minutes. Uses 0.6-0.8mm flux-cored wire. Perfect for entry-level and professional welders

PORTABLE DESIGN

The multipurpose welder features a convenient carry handle, easy for transport & storage. Very convenient, can be used anywhere you need. Includes welding gun, ground wire clip (1.6m), brush, protective mask & 2.5m²1.8m Big USA Plug

UP TO 0.08” PLATE STEEL

This powerful & rugged MIG welder machine features up to 130 Amp output that allows you to weld steel & aluminum up to 0.08” plate steel. Supports dual voltage 110V/220V, wire feeder 24V w/ 0.7KVA/1.8KVA maximum, and minimum power

ADJUSTABLE SPEED

Adjust speed up to 6.7m per minute so you can dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability

• TIG, Stick, and MMA Welding Versatility with 2 Year Warranty
• Inverter Generator with stable sine wave for the steadiest welding
• Weld and Run Electric Tools all at once
• Able to weld 1/3, 1/4, 3/8 inch
• Easily set amperage with Electronic Reader and Knob

User questions & answers

Question:	What is MMA
Answer:	This is a plier type clamp for welding, best used with square tubing over the standard clamp.
Question:	What electric device will not run on 120 volt generator side
Answer:	The one that I bought similar to this picture are 3"
Question:	Can i use this plasma cutter with this welder?https://www.amazon.com/suncoo-electric-inverter-portable-accessories/dp/b078k81r4q/ref=mp_s_a_1_2_sspa
Answer:	NO! Unless you mean the trigger to activate the spool gun, the switch to select between spool gun and mig torch is located on the welding machine...As far as gas divider valve, I don't understand that term....The gas valve is contained in the welder and triggered off the spool gun trigger...as far as the term 'divider', the only way to switch from mig gas to Argon is to swap bottles and hoses on rear of welding machine.
Question:	Does it come with stick leads
Answer:	I don't think so.

Product features

RELIABLE POWER

Permanent Magnetized Generator

Producing the cleanest power of all, this welder's inverter power panel with 50 to 210 Amp DC voltage provides the most reliable amperage control for welding - equip with a Permanent Magnetized Generator for superior power supply.

MMA & TIG WELDING

Built to Fit Your Needs

An excellent choice for professionals, hobbyists and home maintenance chores, Tomahawk Welders are best for Stick, MMA, & TIG welding providing you the highest quality, precise welds - wherever, whenever.

DIGITAL METER

Reliable Amperage

For precise adjustments, this Tomahawk Welder's easy-to-read digital meter and dial provide better control when monitoring amperage for optimal performance - perfect for educators, contractors, ranchers, & more.

WELDING STARTER KIT

Out of the Box Ready

Weld today with a welding kit built to fit your needs - including a TIG torch, MMA stick holder, copper leads, grounding clamp, gloves, and more. Whether you are a novice or just starting your business, this weld kit provides the building blocks to help you grow and craft your skill.

SPARE PARTS & ACCESSORIES

Tomahawk Power understands to keep a job site running smoothly, the proper equipment and parts are needed at the drop of a hat. Gain access to faster spare parts availability, nationwide repair centers, and a comprehensive library of operations manuals, assembly guides, explosion diagrams, and more. Choose Tomahawk today and Power Your World!

• NO REACTION WELDER - Uses convenient flux-cored wire to self-release metal inert gas while welding, preventing oxidation of the welded part; A great choice for home repairs and hobby projects on light gauge steel
• WELDING PROCESS - This welding machine is particularly suitable for mild steel and stainless steel; It will enable you to obtain a professional finish in welding, auto body work, and many other thin steel welding processes
• ADJUSTABLE WELDING SPEED - Features 4 levels of current flow settings; By adjusting the 4 buttons for MIN/MAX,1/2 with the variable feed control which has 10 welding speeds, this welder makes it easy to tackle thin steel, stainless or aluminum sheet metal or thicker steel with flux-cored welding
• PORTABLE DESIGN - Lightweight and compact design; Comes with a comfortable hand grip, making it easy for you to carry anywhere you want
• ACCESSORIES INCLUDED - Package includes all the accessories you need to weld like a pro; 1 welding gun with on/off safety control, 1 grounding clamp, 1 welding helmet, 1 welding wire brush and several other small accessories

User questions & answers

Question:	What amp outlet is required for this welder, 15 amp 20 amp? Thank you
Answer:	Sí, sin ningún problema funciona bien ...
Question:	Cuál es el amperaje maximo que alcansa
Answer:	Hi my friend. Thanks for your asking. This electric mig welding machine N.W is about 15lb(7kgs), the welding machine come with mig welding torch, flux cored wire( 0.45kgs), and ground clamps.
Question:	What kind of contact tips does this use? Where can I buy more contact tips
Answer:	My friend, thanks for your question.Yes this mig Welding machine can use .030 flux core wire.
Question:	How big of a spool can i use with this
Answer:	Hi,my friend. Yes,2-year warranty,and we will be always stand behind our product, we are glad to offer full refund or replacement to you,if you are not satisfird with this MIG welder machine.If this 110V machine has some problems, It be replaced within 60 days.

Product features

VIVOHOME Portable MIG 130 Welder Machine Yellow

Product Specifications:

-Voltage: 110V

-Frequency: 50-60Hz

-Max Absorbed Power: 3.6KVA

-Fuse: 13A

-Current Range: 50-120A

-Max Current Output: 105@15%

-Flux Corded Welding Wire Diam: 0.8-0.9

-Insulation Class: H

-Protection Degree: IP21

Convenient Storage Space

The built-in storage space on the top of welding machine is convenient for to store some small widgets, nails, and screws.

Overheating Protection

This welding machine is equipped with two air vents that help heat dissipation and reduce operation temperature.

Free Welding Helmet

We’ve included a high-quality protective helmet to keep your face and eyes safe while working.

Wire Brush

The wire brush is used to remove debris and metal particles that are dropped during the welding process, making the surface smooth and clear when working.

Product description

This Lincoln Electric Handy Mig Portable Welder is a compact, lightweight welder that makes a great choice for home repairs and hobby projects on light gauge mild steel. Amps 70, Cart Sold separately, Clamp Cable Length ft. 8, Power Cord ft. 8, Regulator and Gas Hose Included No, Shielding Gas Required Yes, Weld Thickness in. 1/8, Mig Ready Yes, Welding Wire Diameter in. 0.035, Wire Feed Speed Control Adjustable, Weldable Metals Mild steel, Dimensions L x W x H in. 12 3/4 x 8 3/4 x 18, Volts 115, Duty Cycle 20 @ 70A. Welds up to 1/8in. mild steel Operates off any 115V, 20 Amp household outlet Amperage output 35-88 20 duty cycle @ 70 Amps Cold contactor safety feature keeps welding wire electrically cold until gun trigger is pressed Adjustable wire feed speed control Welds both MIG shielding gas sold separately and flux-cored 6 ft. power cord and 8 ft. clamp cable 12.8 in. L x 8.8 in. W x 18 in. H Includes welding gun and cable assembly, work cable with clamp, gasless nozzle for flux-cored welding, gas nozzle, gas regulator, hose for MIG welding, 1-lb. spool of 0.035 in. flux-cored wire, 2-lb. spool of 0.025 in. solid MIG wire, three 0.035 in. contact tips, three 0.025 in. contact tips, welding handshield and chipping hammer/brush Factory shipped see order form

From the Manufacturer

Interested in welding? Ready to try your hand at wire welding? Have we got the welder for you - the Handy MIG from Lincoln Electric! This compact, portable and lightweight wire feed welder plugs into a 115V, 20 amp outlet and is user friendly. Four voltage settings and continuous wire feed speed adjustment allow you to weld mild steel from 24 gauge to 1/8" thick. And, it's easy to get started since practically everything you'll need to MIG weld is in the box - gun and cable assembly, work cable and clamp, gas nozzle, gas regulator and hose, spool of solid wire, contact tips and hand shield with filter plate and lens. Just add a cylinder of shielding gas. But that's not all - there's also a spool of self-shielded, flux-cored wire, contact tips and chipping hammer/brush so you can use your Handy MIG to weld with gasless, flux-cored wire too.

User questions & answers

Question:	Can I weld 4130 ChromeMoly tube on an airplane
Answer:	You can only AFTER you convert it to gas and use CO2
Question:	How long are the welding leads
Answer:	Noh
Question:	Is this welder D.C. Output
Answer:	This is a 70 amp out put. This is gasless only . Use flux core wire .035
Question:	Replacing body panels and other sheet metal repairs on Mustang. Do I need gas for this or will this welder handle the job without it
Answer:	The output range is 35-88 amps, but the recommended output is 70 amps at 20%.
Question:	Can I weld aluminum
Answer:	Hi! The GAM 220 MF Digital Angle Finder can be aligned horizontally and vertically with its corresponding spirit levels. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	stas soldadora necesita gaso trabajas Sin ganas
Answer:	Thank you for your quesiton. They are similar, the difference is the GAM270MFL will include an inclinometer and has a range up to 270° as compared to 220° with the GAM220MF. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	What is the difference between this one and Pro Core
Answer:	This GAM 220 MF Digital Angle finder has an accuracy of +/-0.1°. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the maximum amperage output
Answer:	No

Product features

Lincoln Electric K2278-1 Handy Core

The Handy Core wire feeder welder from Lincoln Electric is a tremendous asset when home repair or hobby projects are in your game plan. It's a great pick for welding 18 gauge to 1/8" mild steel and comes with everything you need to get started fast. This package sports a gun and cable assembly, work lead, work clamp and input power cable – all attached at the factory to save you time. A spool of self-shielded, flux-cored wire electrode, welding handshield, and chipping hammer/brush round out the line up. So, don't delay – add the Handy Core to your tool shed or garage today!

• 35-88 amps output.
• Welds up to 1/8 in. mild steel.
• Plugs into household 115V, 20 amp outlet.
• Cold contactor safety feature keeps welding wire electrically “cold” until gun trigger is pressed.
• Compact, portable, lightweight and easy to use.

Product description

Are you looking for an economical,easy to operate，portable design and nice looking welding machine.Here it is MIG WELDER.<>

This mig welder without gas cylinder can replace a stick welder machine.and better than it.

Easy to carry, and double weldig efficiency. very good for a begainner welding. It can be welded all the time by loading flux-cored wire, say goodbye to frequent replacement electrode.

Suitable for welding iron, galvanized pipe, steel plate, stainless steel, etc.

Feature:<>

Type: IGBT MIG welder 160Amp 110V

Input: AC 110V (Frequency:50/60Hz)

Output: (Copper-clad aluminum cable) DC 90V-120V

Current:20-160amp

No load voltage:56V

Rated Duty Cycle: 60%

Efficiency: 85%

Class of Insulation: F

Protection class of case: IP21

W./mig welder&torch(kg): 16.3lb

Machine Size: 5.9in*14.17in*10.23in

Packing of MIg welder<>

1*MIG welder with 5.9ft/1.8m cable(Copper-clad aluminum );

1*welding torch 6.5ft/2m (model:W8-2#) ;

1*welding work clamp 3.9ft/1.2m;

1*300a nickel-plated welding clip;

1*0.8mm(0.45kg/0.99lb)Flux-cored welding wire .030''

 

JACAZOOY MIG WELDING MACHINE<>

Wide Welding Applications:The welder has adjustable wire feed speed and welding current, a comfortable hand grip, easy to start arc, perfect for home DIY and outdoor repairs, rusty metal, farm & road equipment. Adjust the welder to suit your application and weld with different thicknesses.

Welding Process : The working principle of Mig welder is to rectify AC input current to direct current, and then use high power IGBT to inverter direct current to high frequency Ac current and then reduce voltage and rectify.

NOTE:For welding of different materials, it is necessary to change to the corresponding welding wire .

 

Keywords(please passed it)<>mig welder welder

• 👉【Flux-Cored Wire .030'' Gasless Welder】- Display for MIG 160 welding machine uses a convenient 0.8mm/.030'' Flux-Cored Wire.It has adjustable current voltage and wire feed speed control so you can dial in the perfect weld! For welding of different materials, it is necessary to change to the corresponding welding wire.
• 👉【IGBT Strong & Durable Mig Welding Machine】- MIG-160 is a top of the line household IGBT welder that is no gas,digitizing,low splash,smart button. Made of high-class PVC and aluminum alloy material as well as delicate treatment,this welding machine integrates comfortable grip, easy operation and high precision.
• 👉【Overload Safety Protecyion Mig Welder】- MIG-160 welder come with a safety feature where the welder is automatically turned off when it is too hot or the volt and current exceed their range. This function will keep you and your welder safe. Internal fan-cooling system,there are fans helping to cooling the welder when working.
• 👉【Easy to use-Adjustable Mig Welder】- MIG-160 welding machine uses flux core welding wire .030''(0.8mm). Automatic Thermal Safety Protection,suit for welding carbon steel,aluminum,stainless steel etc.Perfect entry level welder.
• 👉【100% Money Back Guarantee】 Mig welder comes with 2 years warranty. If you’re not satisfied with your purchase, we’ll refund you- no questions asked. Faulty our welders can also be replaced within 60 days.

User questions & answers

Question:	Puedo usar este soldador mig para soldar tuberías de hierro
Answer:	We recommend this tig torch for you: https://www.amazon.com/Welding-WP17FV-Welder-Adapter-Frequency/dp/B07K724N9C
Question:	What is the weight for this mig gasless welder? And what accessories included
Answer:	I don,t think so. First it has to be flexible enough to to be pushed thru the leads and the tip.secondly it is made for flux core wire.
Question:	Can this 110V mig welder use .030 flux core wire
Answer:	Sure this mig welder can welder 1/4 inch plate.
Question:	This welder really has a 2 years warranty, and the full payment can be refunded within 45 days
Answer:	I'm afraid not.But we can provide it for you after your order.

Product description

The Forney easy weld 140 fc-I machine uses flux core wire. Applications include do-it-yourself, maintenance and repair, metal fabrication and hobbyist. Product specifications: dimensions: 16. 75" X 8. 125" X 12" Weight: 19 lbs. Gasless/flux-core welding only portable torch wrap infinite voltage and wire feed speed control 120-volt input, 140 amp output welds 24-gauge up to 1/4" Handles . 030" Wire includes: 8' Mig Gun, 8' Ground clamp and 20A - 15A adapter duty cycle 30% @ 90A

• EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
• POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
• PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
• RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire
• WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty
• PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A
• RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031)
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

User questions & answers

Question:	This come with the welding wire
Answer:	I'm sorry it took as long as it did for me to answer you. I have no prior knowledge of this Predator generator and I had to look that up. I also would like to preface what I'm about to say with I am not a generator expert. Also I wanted to be sure that I looked up the specific amperage draws of our different welders. The formula for calculating the answer to your question is pretty straight forward. Generators measure their output in Watts in order to determine what wattage is necessary the formula is as follows... Volts X Amps = Watts. The machine you are asking about runs 7250 continuous Watts but it does not take into account what percentage of fluctuation of output amperage this machine makes, how clean is this machine? How reliable is the output amperage? I have no idea but let's plug the numbers in assuming the machine can maintain a relatively stable output. The model 155 draws max 25.4 amps on 230V in MIG mode or, 5842 watts. It draws 26.7amps on 230V in stick mode or, 6141 watts. So for this small machine it would appear yes all else being ok. Now, for example, our 200 amp MIG draws in MIG mode 35.7 amps at 230 V or, 8211 watts. It draws 41.7 amps in stick mode at 230 V or, 9591 watts. So for our larger inverters, it would appear no, that generator cannot provide sufficient output to run the welders at full potential welding power.
Question:	What type of .30 tip? Thread pitch? Size
Answer:	So only going by the pictures this appears to be a Tweco style gun similar to what the older Lincoln’s ran. Unfortunately you will have to find out what the US pro welding gun has for a back end.
Question:	Is the wire supposed to move really slow even turned all the way up
Answer:	No, not on the 155 model. 2lb
Question:	Do you know what the power output is turned all the way down
Answer:	This question really is more a generic question than it is specific to any brand welder. If you're giving it half the power it can use. Generally, you can figure you're going to get half the result. So prepared properly and possibly a little bevel, 1/8in would be about max Remember voltage is the pressure or pushing force of the amperage or heat.

Product features

Forney Easy Weld 140 FC-i Welder

The Forney 140 welder is an impressive Flux-Core capable welder. Perfect for first time welders up to avid users. Applications include do-it-yourself projects, general metal fabrication, maintenance & repair, farm & ranch and automotive work.

• [Welding Wire] Supports 2lb only flux core wire and perfectly to do the steel welding without gas. Meanwhile,welding with gas with 2lb solid welding wires .030"-.035"（0.8/1.0 mm )to weld over .030"(0.8mm) thickness workpiece.
• [Multipurpose Welder] mig/lift tig/stick/mma multipurpose welding machine,gas/gasless all are available ,mma welding(3.2mm rod) 7018 1/8″ very well, also 6013 and 7018 3/32″Mig/lift tig/stick/mma multipurpose welding machine,gas/gasless all are available ,mma welding(3.2mm rod) 7018 1/8″ very well, also 6013 and 7018 3/32″
• [Lift Tig] Lift tig mode(not HF tig) is optional,please refer the picture to connect the tig mode(This product does not have a TIG gun)
• [Flux Core Welding] You will need the co2 or mixed composition welding solid wire,however,no gas required welding with flux core, portable design 18lbs, and easy to weld with high effect instead of stick welder.
• [Warranty Assurance] We are a manufactory with over 10 years' experience of professionals producing the plasma cutter machines,3 year's warranty.Please add to cart and take it without hesitation

User questions & answers

Question:	Where can i find the tig torch for this welder
Answer:	Yes. Having never welded before, I was able to weld a rocker panel back together that had to be cut apart in order to pull out some crash damage. This welder is powerful enough that I had to turn the power down to prevent burn-through.
Question:	Can you use hard wire
Answer:	Not sure but I got 20
Question:	Will this welder be able to a tack weld 1/4 inch steel plate
Answer:	Yes. And yes
Question:	Does this include a Tig torch
Answer:	You can run a #12g cord 100ft and it should work if it is on 20amp breaker, if you go more you need a 10g cord.

Product features

Setting the Gas Flow

1. Turn on the welder.
2. Turn the wire speed as low as it will go.
3. Turn the voltage as low as it will go.
4. Pull the trigger on the torch in order to start the gas flow. Make sure that the wire that comes out of the torch doesn’t touch anything.
5. Release the trigger.
6. Cut the wire so it sticks out 1/4" to 3/8" from the gas nozzle.

MIG MODE (GAS)

Gas Welder:

Plug the ground to (-),conversion plug to (+)

MIG MODE (GASLESS)

Gasless Welder(flux core):

Plug the ground to (+),conversion plug to (-)

LIFT TIG MODE

Lift Tig:

Plug the ground to (+),plut the tig torch to (-).

Note:tig torch not included in the package.

STICK MODE

Stik/MMA:

Plug the electrode holder to (+),ground to (-),leave the torch along.

• ★ THE COOLEST AND PLEASANT MULTIFUNCTIONAL WELDER - HZXVOGEN MIG185Ⅱwelder came with color LCD display with make the setting parameter very easy to read. It is super easy and convenient to chose the welding mode by pressing the “Selection” button. Once choosing the mode you need, the mode will light up with its matching color
• ★ MIG FUNCTION - HZXVOGEN MIG185Ⅱwelder supports gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld 1mm-8mm thickness workpiece. When adjust the current, the wire speed and output voltage will be auto matched. Little splash, deep bath and smooth wire feeding bring you beautiful welding seam
• ★ LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a WP-17V tig torch will be needed. Please kindly note that WP-17V tig torch is not included in this package
• ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little spatter, stable current, and good performance
• ★ IMPORTANT NOTE - This welder can work on 220V ONLY. Please ignore the “110V” printed on the display. The “SIM” ”SIG” is for dual pulse function, but this welder does not have this function. Please also ignore them

Product features

Upgraded Multifunctional MIG Welder

The old version MIG185 is very popular among Amazon customers. To meet customers' needs, we upgraded our MIG185. NOW, it is MIG185II.

1. MIG185II came with color wider LCD digitial display. Super very easy to read.
2. Easy to use. choose the welding mode by on button pressing.
3. Easy carrying handle, compact design, easy for translation and storage. Very convenient, can be used anywhere you need.
4. High efficiency, low consume, save energy.
5. Multifuntional welder, meet all your needs.

...

What we have, but others do not

Multifunction

HZXVOGEN MIG185II support:

• Gas MIG
• Gasless MIG
• Mix MIG
• MMA
• Lift TIG, can work with WP-17V TIG torch.

NOTE: WP-17V TIG torch will not come with the package.

Weld Thiner Workpieces

It can weld iron, carbon steel, stainless steel, and so on. The thinnest board it can weld is 1.mm.

Widely Use

This welder is ideal for home, work and DIY use. It is a must have assistant of your work and life. Also a great gift for you family and friends.

Flawless Welding Work

Little splash, deep bath and smooth wire feeding bring you beautiful welding seam.

Do not Have These Functions

This welder can work on 220V ONLY. Please ignore the “110V” printed on the display. The “SIM” ”SIG” is for dual pulse function, but this welder does not have this function. Please also ignore them

Connect Gas Regulator Heater

Please kindly note that this is to plug the heater of gas regulator.

Adjust Current Button

Spin it to adjust the current. When adjust the current, the wire speed and output voltage will be auto matched.

Selection” Button

It is super convenient to choose the welding mode by pressing the “Selection” button. Once choosing the mode you need, the mode will light up with its matching color

Product description

MIG155Gsv is both MIG and self-shielded flux cored welding machine, which is equipped with unique electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed transfer resulted in better performance than other machines. Compared with silicon controlled welding machine and tapped welding, our products have the following advantages: stable wire feed rate, portable, energy-saving, electromagnetic noise free. Besides, our products spatter less, easier arc starting, deep welding pool, high duty cycle etc.

• Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
• Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
• Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
• This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
• The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.

User questions & answers

Question:	Would the predator 9000 generator with 7250 continues run this and your larger inverter welders
Answer:	The Hobart IronMan 230 is made in the U.S.A. and backed by Hobart's industry-leading 5-3-1 industrial warranty. You get a 5-year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes; a 3-year warranty on drive systems, PC boards, solenoid valves, switches and controls; and 1-year warranty on plasma torches, MIG guns, relays, contactor, triggers, regulator, accessories, spoolguns, battery, field options and running gear. (90-day limited warranty for industrial use). Normal wear items such as drive rolls, contact tips, nozzles, gas diffusers, plasma torch tips, electrodes and weld cables are not covered under this warranty.
Question:	Where can I get a new welding torch that’s longer than the one supplied with this welder will the US pro welding 15 footer fit on this welder
Answer:	My welder only came with .030 tubular 0.035 solid wheel. I recall that being an order able accessory. Not 100% sure but I thought it was suppose to have a #2 roll of FC. Overall, it’s been a damn good welder and I’d recommend it.
Question:	Can use 10 pound spool wire
Answer:	We ship this item at no charge. Thank you
Question:	When using 110V, can you effectively weld 1/4”? If not, what’s the maximum capacity when using 110V
Answer:	I think what you are asking is what the duty cycle is. It all depends on the heat setting you are using at the time. The duty cycle at about 140 amps is close to 100%, and drops to about 30% at 250 amps. I don't know what you will be welding, but even on pretty heavy iron (3/8" or so) using .035 solid wire and co2/ argon gas, I seldom ever use more than 125, to 140 amps, so I never exceed the 100% duty cycle. But I also very seldom have long enough welds at a time to matter. The welder I had before I bought the Ironman 230, was just a 150 amp with about a 30% duty cycle at 120 amps, and it was still going after nearly 30 years, and I used it for some pretty big projects.

• ❤The welder has adjustable wire feed speed and welding current, you can adjust it to suit your application and weld with different thicknesses,Achieve perfect welding
• ❤Uses 0.30/0.35, flux core wire,Up to 125 Amp output that allows you to weld mild steel up to 1/8 in plate
• ❤Easy to set the parameters. The mig125D supports with 1kg flux cored wire most perfectly to do the carbon steel welding without gas.Mig/Mma ,Gas/Gasless all are available
• ❤Dual Voltage IGBT Inverter MIG125A ,Allows connection to 110 or 220V receptacles without tools【30A breaker suggested for 220V, 50A breaker suggested for 110V】
• ❤Portable welder-Only 22.6lbs,Gasless flux-cored welding and Gas-shielded,easily carried.It is a good gift for DIY users, repairs and metal processing,Perfect multifunction entry level welder

User questions & answers

Question:	What do i need with this welder ? can i weld fluxcore right out of the box ? thanks
Answer:	In the Product Information/ Technical Details it states "Imported"have a look at the Channellock brand on here- they are made in USALink: http://www.amazon.com/gp/product/B009OHH4FO/ref=s9_psimh_gw_p469_d0_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=07WHN63Y7SAAY27BTB23&pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846
Question:	What material with this machine can weld?and can aluminum
Answer:	Jaw gap with jaws clamped tight is 1 1/8". Max jaw opening is 1 7/8".

Product features

Simple and clear operation panel

1. Current display meter
2. Voltage display meter
3. MIG/MMA/LIFT TIG Function selection
4. Choose the wire diameter and the choice of gas welding and gasless welding
5. Small range voltage adjustment and inductance adjustment
6. Adjust the value knob
7. MIG Welding torch connector
8. Polarity selection plug
9. Negative Terminal
10. Positive Terminal

Multi-function welding machine

• Three modes of operation, MIG, MMA, and LIFT TIG, can be used in a variety of scenarios to meet your versatile needs.
• Excellent support for 0.8 mm and 1.0 mm diameter welded wires. Optimal welding parameters are automatically and intelligently matched according to the various specifications of the welding wire to achieve the best results.
• It can be used for a wide variety of metals and alloys. MIG welds are much faster than traditional weld methods and produce long, continuous welds.

Machine operation guidance Tips:

1. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or watching;

2. Wear approved safety glasses,side shields recommended;

3. Use protective screens or barriers to protect others from flash and glare; warn others not to watch the arc;

4. Wear protective clothing made from durable, flame-resistant material(wool and leather) and foot protection;

5. Use approved ear plugs or ear muffs if noise level is high;

6. Never wear contact lenses while welding.

Perfect Entry Level Welder ZS-MIG125D

• ZS-MICTEK MIG125 Welding machines will be subjected to strict various tests when they leave the factory to ensure that each welding machine that reaches the user is of high quality.
• Because our machine has to go through tens of thousands of kilometers of long-distance transportation from the factory to the delivery to you. It’s inevitable that some uncontrollable factors will cause some internal components of the machine to become loose or even damaged in the process.
• We recommend that you check the external device as soon as you get the welder, and turn on the power to check to ensure that you receive It is a qualified product.

• Synergic Adjustment Function(Software Control):The current and voltage values are intelligent automated matched(voltage value not displayed), more easier for entry level welders.
• Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG, gas MIG.
• Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
• Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
• Dual voltage input design: Welding machine can be plugged into 110（120）V / 220(230)V dual voltage (Automatic fitting).

User questions & answers

Question:	what kind of TIG torch should I use
Answer:	Please take the unit to your nearest warranty repair center. You can locate one at www.hobartwelders.com
Question:	Will this fit a 10 lbs spool
Answer:	To operate at maximum capabilities you would need a 6500W -7000W continuous rated generator.
Question:	Will 20A @110V work for this welder? will not be welding thicker than 1/4 plate steel
Answer:	Hobart offers a full portfolio of easy-to-use, ready-to-weld products that welders can depend on for every job, every time they turn on our machines. The majority of Hobart welding machines are designed, developed and manufactured using proprietary technologies in Appleton, Wisconsin. The Stickmate 160i and 210i are produced outside the United States, and are designed to meet Hobart specifications and requirements, ensuring both novice and experienced welders have the equipment to make their projects a success. We work with trusted sources to ensure that our welding machines meet the high-quality standards that you have come to expect from the Hobart brand.
Question:	Can a foot pedal be added
Answer:	This unit is DC only output and is an inverter based power unit.

Product features

TOOLIOM 200A MIG Welding Machine

1. Synergic Adjustment Function(Software Control): Easy and simple to operate.
2. "One button"selection design:Choose the right welding method according to different welding requirements.
3. Voltage can micro adjust (-1.5V to +1.5V,value not displayed)
4. 5 Functions in 1:Multi-functions in one machine,suitable for MMA,Lift Tig,Flux Mig,Gas Mig,suitable for mild steel works.
5. 2T/4T Operation:2T is suitable for spot welding and simple work.4T is suitable for continuous long-term welding and releases fingers.

Size

• Net Weight is 20.5LB/ 9.3KG.
• Comes with a modern aluminum handle grip, making it easy for you to carry anywhere you want.

Package Included

• MIG Welder
• Adapter Cord
• Shielding Gas Hose 9.8'
• Ground Clamp with 10'(3M) Cable
• MIG Torch with 10'(3M) Cable.[.030/0.8mm contact tip installed]
• Electrode Holder with 10'(3M) Cable
• Wire Brush
• W Knurl Groove(FCAW-GS)

Flux-Cored

• Locate the Ground Clamp with Cable and connect the plug on the cable end to the Positive Connector (+) on the Welder.

MIG

• Locate the Ground Clamp with Cable and connect the plug on the cable end to the Negative Connector (–) on the Welder.

Lift TIG

• Locate the Ground Clamp with Cable and connect the plug on the cable end to the Positive Connector (+) on the Welder.
• Lift tig is optional(need buy extra tig lift torch,not included inside product)

ARC

• Locate the Ground Clamp with Cable and connect the plug on the cable end to the Negative Connector (–) on the Welder.

• Multi-functions:Auto 110V/220V Dual Voltage IGBT Inverter 125A perfect entry level welder, Suitable for MMA, Lift TIG, flux MIG, gas MIG
• Adjustable wire feed speed and welding current, you can adjust it to suit your application and weld with different thicknesses,Achieve perfect welding
• Uses 0.30/0.35, flux core wire,Up to 125 Amp output that allows you to weld mild steel up to 1/8 in plate
• 110/220V input power,Allows connection to 110 or 220V receptacles without tools【30A breaker suggested for 220V, 50A breaker suggested for 110V】
• Portable welder-Only 22.6lbs,Gasless flux-cored welding and Gas-shielded,easily carried.It is a good gift for DIY users, repairs and metal processin

User questions & answers

Question:	Trae todos los accesorios que muestran en las fotos
Answer:	I took mine and opened it up all the way. It will only accept a board 2-3/4" wide or maybe 2-7/8" at the most.
Question:	What size wire tip does the mig gun come with and is the spare a different size?does it have a 110v/220v switch or is it auto detect
Answer:	Hello, this is Emily with Hobart Welding Products. This clamp has a maximum opening of 75 mm (2.95 inches).
Question:	I just received this model as a gift and love it so far. My question: will this model penetrate 3/16” plate steel, if the current input is 220v? Thank
Answer:	i got mine in 2 days.
Question:	I am a new welder. Is this machine easy to operate
Answer:	Thank you for choosing Irwin Tools. Our goal is to provide our customers with the highest quality and service. The pliers have grooves on the inside at the tip of the pliers only

Product features

Simple and clear operation panel

1. Current display meter
2. Voltage display meter
3. MIG/MMA/LIFT TIG Function selection
4. Choose the wire diameter and the choice of gas welding and gasless welding
5. Small range voltage adjustment and inductance adjustment
6. Adjust the value knob
7. MIG Welding torch connector
8. Polarity selection plug
9. Negative Terminal
10. Positive Terminal

Multi-function welding machine

• Three modes of operation, MIG, MMA, and LIFT TIG, can be used in a variety of scenarios to meet your versatile needs.
• Excellent support for 0.8 mm and 1.0 mm diameter welded wires. Optimal welding parameters are automatically and intelligently matched according to the various specifications of the welding wire to achieve the best results.
• It can be used for a wide variety of metals and alloys. MIG welds are much faster than traditional weld methods and produce long, continuous welds.

Machine operation guidance Tips:

1. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or watching;

2. Wear approved safety glasses,side shields recommended;

3. Use protective screens or barriers to protect others from flash and glare; warn others not to watch the arc;

4. Wear protective clothing made from durable, flame-resistant material(wool and leather) and foot protection;

5. Use approved ear plugs or ear muffs if noise level is high;

6. Never wear contact lenses while welding.

Perfect Entry Level Welder ZS-MIG125D

• ZS-MICTEK MIG125 Welding machines will be subjected to strict various tests when they leave the factory to ensure that each welding machine that reaches the user is of high quality.
• Because our machine has to go through tens of thousands of kilometers of long-distance transportation from the factory to the delivery to you. It’s inevitable that some uncontrollable factors will cause some internal components of the machine to become loose or even damaged in the process.
• We recommend that you check the external device as soon as you get the welder, and turn on the power to check to ensure that you receive It is a qualified product.

• 🛒Look at the panel,it is easy to set the parameters. the mig130 supports with 1kg flux cored wire most perfectly to do the carbon steel welding without gas.mig/mma ,gas/gasless all are available ,mma welding(3.2mm rod) 7018 1/8″ very well, also 6013 and 7018 3/32″
• 🛒Using gas with 1kg solid welding wires .030"-.035"（0.8/1.0 mm ）to weld over .030"(0.8mm) thickness workpiece. also supports gasless welding,portable design 18bls.【30A breaker suggested】
• 🛒Lift tig mode is optional(need to buy extra tig torch,not included in this package).please find the tig torch as below
• 🛒Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
• 🛒Buy with confidence as Reboot offer 30-day consumables guarantee and 3-year limited warranty.click on the add to cart button now!

User questions & answers

Question:	What is the minimum and maximum thickness this machine will weld
Answer:	Classic type
Question:	Can you do arc/stick welding with this welder
Answer:	I'm not an expert, but based on my experience with it I would say "no." The bottle gets weak once it's cut in two. I pushed down hard when scoring where I was cutting. I would think the bottle would break if I tried that with it already cut.
Question:	What size genarator i need for my reboost 1300 welder
Answer:	Most hardware stores will not have ones as large as you will want. Instead look in your area for someone who carries hydraulic hoses they typically have the largest selection of o-rings
Question:	What type of outlet do i need
Answer:	No square bottles ... only round.

Product features

Troubleshooting

Why is my MIG-130 Welder not welding correctly?

1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly?

2. Wire choice: Are you using .035” wire? We recommend .025-0.30" for best performance.

3. Stick out: Is your stick out too long? Your stick out should be no more than ½”.

4. Pull the trigger: To begin welding, pull the trigger on the MIG gun.

5. Proper grounding: The ground should not be attached to painted or coated metal.

MIG/LIFT TIG/MMA STICK 3 in 1 WELDING MACHINE

Input power voltage: AC220±15% V

Rated input power capacity: 4.5KVA

Input current :16A for MIG,21A for MMA

Rated output current :130 A

Duty-cycle: 60%

Output current range :30-130 A

Output voltage range :15-19V

Insulation class :　 F

Protection class :　 IP21S

Factory Production Process Control System

1,Compoents quality control with fan, on-off swtich ,power cord with 100% production test before delivery .

2.Package kit check to assure all welding accessories including.

3.Carry out welding performance test, life test ,function test and temperature test.

4.Mass production capacity with 10000pcs per week.

Product description

Rated input voltage (V) - AC~220V±15%

Frequency (HZ) - 50

Rated input current (A) - 17.4

Rated input apparent power (KVA) - 4

Welding current adjust range (A) - 35 ~ 145

Welding voltage adjust range (V) - 15.5 ~ 20

Duty cycle - 60%, 70A; 25%, 140A

No load voltage (V) - 60V

Power factor - 0.73

Efficiency(%) - ≥85%

Protection class - IP21S

Package list - 1 X earth clamp can cable (undetachable), 1 X MB15 MIG torch (undetachable)

• UNIQUED MIG WELDER FOR MIG WELDING - HZXVOGEN MIG145 welder is an united flux cored wire welding machine. Little splash, deep bath and smooth wire feeding bring you beautiful welding seam. Even fresh welder can weld well with the help of our MIG145 welder
• PERFECT FOR ULTRAL THIN WORKPIECE - MIG145 welder use 0.6/0.8mm 1kg flux cored wire. Can welder 0.8mm ~ 4mm thickness. This welder can spot weld ultral thin board quickly. The welding spot is super smooth and firm
• HIGH EFFICIENCY - The working efficiency is 30% higher than traditional mma welder. This welder can bring you a clean welding. There is no need to remove the welding slag and grind. Welding wire will be automatically feed when press torch trigger, no need to filler wire
• WELDING PROCESS - This welder is perfect for mild steel, carbon steel galvanized steel, etc.. It will enable you to obtain a professional finish in welding, auto body work, and many other thin steel welding processes. It is also a great choice for home repairs and hobby projects on light gauge steel
• 1 YEAR WARRANTY AND GREAT AFTER SALE SERVICE- HZXVOGEN welder offers good warranty. If the machine can not work or have other problem when working, please contact us at the first time, we can help you to fix it and we have agent in the United States, our agent will repair it for you. If finally we can not solve the problem, we will send you a new replacement