11 best amp mig welder

Product description

This arc welding wire parts are made of rubber and zinc plated materials. This replacement adapter part is meant for MIG welders' semi-automatic guns. It is 15 feet long. It is designed for most Bernard and Tweco style compatibility. This liner fits for This arc welding wire parts are made of rubber and zinc plated materials. This replacement adapter part is meant for MIG welders' semi-automatic guns. It is 15 feet long. It is designed for most Bernard and Tweco style compatibility. This liner fits for 0.35-0.45 inches diameter. This liner can be used with solid wire or flux core. This rubber coated gas wire allows for better feedablity and feed from the spool. The distribution of the CO2 Argon mix gas is well aligned. The rim and liner are designed to stop the release and return of gas. This premium compatible Bernard style MIG wire liner 43115 0.35’’ – 0.45’’ for Q/S 200/300 Amp MIG guns. This welding wire liner fits mostly to universal common brands of MIG guns. This ready to use product can be used right after you receive the package. Re-insert liner into power pin with cable laying straight. Continue until liner lock is fully seated into the power pin. A twisting motion may be necessary to seat the O-ring (some power pins may require installation of additional components to secure liner). Making sure the cable is straight, push liner back into gun (back load) and trim liner on front of the gun per diffuser/retaining head part number. Features: -Easy identification - part no rolled stamped on the outside surface of the brass stop -Each wire conduit has a brass alloy machined stop on the back end -Zinc plated spring wire to minimize corrosion on the metal surface -Universal conduit liner is ready to use right out of the box -Each conduit liner wire has a crimped wire guide that is universal common to all brands of MIG guns -Attached to the wire guide is an adapter; use different adapter for different MIG gun brands -Liner comes already attached with adapter

• PREMIUM QUALITY - Bernard style MIG wire liner 43115 0.35’’-0.45’’ for Q/S 200/300 Amp MIG guns. This welding wire liner fits mostly to universal common brands of MIG guns.
• 15 FEET LONG - High quality crimped welding liner made of Zinc-plated spring wire that minimize corrosion on the metal surface. Liners will not gap when bent.
• RUBBER COATED WIRE - This rubber coated gas wire allows for better feedablity and distribution of the CO2 Argon mix gas. The rim and liner are designed to stop the release and return of gas.
• READY TO USE - You can use this liner right after you receive the package. Better diffusing cable wire.
• U.S. POSTAL SERVICE - Welding Products Online uses (USPS) as main carrier. Please provide a USPS deliverable address.

Product description

"Features: - Easy to Use and Convenient to Carry - Powerful and Rugged MIG Welding Machine up to 120 Amp Output - Nice Machine Appearance and Screen Printing - Anti-corrosion & Water Resistant Metal Machine Case - Easy to Read the Numbers of Scale - Test Data Supports Stable Performance and Output Voltage - Protects Components and Transformer from Corrosion and Damage - 10% Rated Duty Cycle, Weld for One Minute, Rest for Nine Minutes - Adjustable Welding Speed up to 6.7m per Minute - Supports Dual Voltage 110V/220V, Wire Feeder 1-12V - Accepts 0.8-1.0mm Flux-Cored Wire - 1.35KVA/4.2KVA Maximum and Minimum Power - 6.8mm of Maximum Thickness of Metal - Allows to Weld Steel up to 0.24-0.3 inches Plate Steel - Automatically Adjust the Inverter Pulse Width through Closed-Loop Control to Ensure the Output Stability What's in the Box: - Welding Machine - Welding Gun - Ground Wire Clip (1.6 meters) - Brush - Protective Mask - 2.5m1.8m Big USA Plug Technical Specs: - Construction Material: Low Carbon Steel, Low Alloy Steel, and Stainless Steel - Power Supply: 110V/220V - Maximum Input Current: 110V/8A, 220V/19A - Frequency Response: 50/60Hz - Rated Input Power: 4.2KVA - Current & Voltage Adjustment Range (MIG) : 60A/17V-130A/20.5V - 40?60% Utilization Factor Output (MIG, A/V): (56A/16.8V) - 40?100% Utilization Factor Output (MIG, A/V) :(43A/16.2V) - No-load Voltage: 31V - Usable Wire: 0.02''-0.04'' -inch - Wire Feed Rate: 13m/min - Power Factor: 0.93 - Efficiency: 93% - Shell Protective Grade: IP21S - Insulation Grade: H - Welding Output: 60-130A,AC - Capacity: 18 gauge (0.039") to 3/16" (0.24") mild steel only - Not for welding aluminum - Duty Cycle: 10% @130A - Open Circuit Voltage: 20.5V - Welder Tips / Wire Size Installed tip will accept 0.031" Flux-Core wire - Wire Spool Capacity: 2.2 lbs. Spool - Recommended Circuit Breaker: 30A time-delay (slow-blow) breaker (30A for maximum performance) - Extension Cord Recommendations: 3 conductor #12A or larger up to 4.9 ft. - Generator Requirements: Minimum 4,000W continuous output with no low-idle function (or low-idle off) - Product Dimension (L x W x H): 13.4'' x 7.5'' x 14''-inches"

• 10% RATED DUTY CYCLE: The SereneLife Digital MIG Welding Machine features 10% rated duty cycle which allows you to weld for one minute then rest for nine minutes. Uses 0.8-1mm flux-cored wire. Perfect for entry level and professional welders
• 0.24-0.3” PLATE STEEL: This powerful & rugged MIG welder machine features up to 120 Amp output that allows you to weld steel up to 0.24"-0.3" plate steel. Supports dual voltage 110V/220V, wire feeder 1-12V w/ 1.35KVA/4.2KVA maximum and minimum power
• ANTI-CORROSION MACHINE CASE: The handy MIG welder features anti-corrosion and water resistant metal machine case w/ nice machine appearance and screen printing. Protects components and transformer from corrosion and damage
• ADJUSTABLE SPEED: Adjust speed up to 6.7m per minute so you can dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability
• PORTABLE DESIGN: The multipurpose welder features a convenient carry handle, easy for transport & storage. Very convenient, can be used anywhere you need. Includes welding gun, ground wire clip (1.6m), brush, protective mask & 2.5m²1.8m Big USA Plug

User questions & answers

Question:	Is this machine good for weld stainless steel
Answer:	It is on the back side
Question:	can you use either 120 or 240 volts
Answer:	You'd better use a 35amp bigger breaker, the rated input current is 33A. And yes you can use that generator.

Product description

AMICO Power 3-IN-1 MIG/TIG/STICK Arc Combo Welding Machine, Very Easy to weld 1/4" Aluminum, MTS-165 is the perfect choice for projects and repairs around the home and auto body shop. This welder can work well with solid wire and flux wire as well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly. The welder output range 10-165 amp. It uses standard flux-core wire(E71-gs) or steel wire 0.6-0.9mm, and aluminum wire. It has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Specifications: Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder, Output Terminal Type: Direct Wire, Power Supply: AC 100V-240V/Single Phase/50-60Hz. Effective Input Current: 115V: 28.9A(MIG)/17.2A(TIG)/29.1A(STICK); 230V: 19.8A(MIG)/11.9A(TIG)/19.5A(STICK). Maximum Input Current:115V: 37.3A(MIG)/22.2A(TIG)/37.6A(STICK); 230V: 25.6A(MIG)/15.3A(TIG)/25.1A(STICK). Current RangeOutput:MIG:115V/50A-130A, 230V/50A-165A; TIG: 115V/10A-110A, 230V/10A-140A; STICK: 115V/10A-110A, 230V/10A-140A. Nominal DC Open Circuit Voltage (OCV): 56V, Welding Output,104F(40C),10 min(230V): MIG: 165A/22.2V, TIG: 140A/15.6V, STICK: 140A/25.6V. Duty Cycle: MIG: 60% at 165A, 100% at 128A; TIG: 60% at 140A, 100% at 108A; STICK: 60% at 140A, 100% at 108A. Efficiency:93%, Power factor:0.85, Cooling Method: Fan Cooled. Includes:13 ft200Apro. MIG gunand cable assembly, 13 ft 200Apro.TIG Torch gun and cable assembly, 10 ft 300Aelectrode holder and cable assembly, 10 ft 500A work clamp and cable assembly, 110V/240V power plug adapter, 8 feet air hose use for Co2 and Argon connect, 1 spool 2 lbs. aluminum wire use for MIG weld, 1 spool 2 lbs. steel wire use for MIG weld, 2 pcs tungsten Needle use for TIG weld, 4pcs electrode use for Stick Arc weld, 1 U-drive roll for 0.030” & 0.035” (0.8mm/0.9mm), 1 V-drive roll for 0.023” & 0.030” (0.6mm/0.8mm), Quick manual & Owner’s Manual.

• MTS-165 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
• Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
• Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
• Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
• Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.

User questions & answers

Question:	Which spool gun works with this machine? What do I need to weld aluminum with this machine
Answer:	you need the (us seller 10 mig spool gun fit amico power combo welder mts-165/185/205,awm-145 amuminum welding ) sold by cympollia 2016 but its out stock right now
Question:	For the tig... is it scratch, lift, or hf start
Answer:	Lift start
Question:	Is the TIG scratch start, lift arc or high frequency
Answer:	It is lift start.
Question:	will this welder hold a 10# spool of wire or just the 2# size
Answer:	Both

Product description

Get the benefit of wire welding without the hassle of gas. The Flux 125 Welder is a versatile flux core arc welder (FCAW) specifically designed to use self-shielding flux-cored welding wire. This eliminates the need for gas and regulators that normal MIG welders require. Set-up is easy for gasless flux-cored welding. With variable speed wire control and thermal overload protection, this flux wire welder provides dependable performance in a compact, lightweight package. The Flux 125 welder can weld mild steel from 18 gauge up to 3/16 in. thick which makes it ideal for jobs around the yard, shop or house.

• The perfect welder for outdoor use and on dirty metals
• Compact, portable and lightweight…weighs just 38lbs!
• Continuous wire feed speed control for optimal welding performance
• Built in overload protection to prevent overheating

User questions & answers

Question:	Do you need to buy a tip for the .035 wire or can you use the tip in the box
Answer:	Dear customer, the mig 130 welder could weld 3mm/0.12inches for one pass. Hope my answer is helpful.
Question:	Does it work with an extension cord
Answer:	No this welder will weld mild steel this welder does not use gas flux core wire only
Question:	Can I just "Plug and play" into any outlet in my house
Answer:	Sadly china found out after I got the box nice little welder I fixed trailer and all kinds of little jobs with it recommend a .30 spool of fluxcore
Question:	I wanna use this for exhaust system so i can make it cat less.so the sound can be more aggressive.should i get it
Answer:	no phone calls pls

Product description

AMICO Power 3-IN-1 MIG/TIG/STICK Arc Combo Welding Machine, Very Easy to weld 1/4" Aluminum, MTS-165 is the perfect choice for projects and repairs around the home and auto body shop. This welder can work well with solid wire and flux wire as well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly. The welder output range 10-165 amp. It uses standard flux-core wire(E71-gs) or steel wire 0.6-0.9mm, and aluminum wire. It has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Specifications: Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder, Output Terminal Type: Direct Wire, Power Supply: AC 100V-240V/Single Phase/50-60Hz. Effective Input Current: 115V: 28.9A(MIG)/17.2A(TIG)/29.1A(STICK); 230V: 19.8A(MIG)/11.9A(TIG)/19.5A(STICK). Maximum Input Current:115V: 37.3A(MIG)/22.2A(TIG)/37.6A(STICK); 230V: 25.6A(MIG)/15.3A(TIG)/25.1A(STICK). Current RangeOutput:MIG:115V/50A-130A, 230V/50A-165A; TIG: 115V/10A-110A, 230V/10A-140A; STICK: 115V/10A-110A, 230V/10A-140A. Nominal DC Open Circuit Voltage (OCV): 56V, Welding Output,104F(40C),10 min(230V): MIG: 165A/22.2V, TIG: 140A/15.6V, STICK: 140A/25.6V. Duty Cycle: MIG: 60% at 165A, 100% at 128A; TIG: 60% at 140A, 100% at 108A; STICK: 60% at 140A, 100% at 108A. Efficiency:93%, Power factor:0.85, Cooling Method: Fan Cooled. Includes:13 ft200Apro. MIG gunand cable assembly, 13 ft 200Apro.TIG Torch gun and cable assembly, 10 ft 300Aelectrode holder and cable assembly, 10 ft 500A work clamp and cable assembly, 110V/240V power plug adapter, 8 feet air hose use for Co2 and Argon connect, 1 spool 2 lbs. aluminum wire use for MIG weld, 1 spool 2 lbs. steel wire use for MIG weld, 2 pcs tungsten Needle use for TIG weld, 4pcs electrode use for Stick Arc weld, 1 U-drive roll for 0.030” & 0.035” (0.8mm/0.9mm), 1 V-drive roll for 0.023” & 0.030” (0.6mm/0.8mm), Quick manual & Owner’s Manual.

• MTS-165 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
• Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
• Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
• Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
• Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.

Product description

About Lotos Technology

Headquartered in Sunnyvale, California, USA, Lotos Technology supplies quality welding and cutting tools to small businesses and Do-It-Yourself (DIY) buyers. Since 2007, our products have gained recognition as a reputable source for affordable industrial and consumer based portable plasma cutters and welders. We are proud of our product, quality and after-sale service. We offer quality welding and cutting tools to small businesses and DIY buyers. Our tools help you with your DIY projects to "Cut it, Weld it, Build it" to get the job done!

The LOTOS MIG140 features a 140 amp MIG welder that can weld at industrial quality and performance at a very affordable price. The most versatile and perfect welder for do-it-yourself home users as well as professional users. The LOTOS MIG140 is also spool gun capable for welding aluminum. It can be easily connected to your existing 110V wall outlet and quickly setup within 10 minutes or less. It handles industrial standard 4" or 8" wire spools and incorporates a thermal overload protection system to protect your welder.

• ★ Aluminum Wire Feeder—The durable high quality aluminum wire feeder offers a much more stable and better welding experience.
• ★2T/4T—2T(Manual)/4T(Semi-auto) switch is now available; you can release your finger for long time welding job.
• ★ More Precisely--Customer can adjust the wire feeder speed and welding voltage more precisely with the 2 digital displayers. new designed ground cable quick connector.
• ★Rated Output--140-amp MIG welder; mild/stainless steel: 24 gauge - 3/16"; input voltage: 110/120v; it can be easily connected to your existing 110/120v wall outlet.
• ★Multi Use--Welding stainless steel, mild steel, aluminum (with a spool gun, not include in the package, need to purchase separate) and other metal materials.
• ★Wire Range-- . 025"-. 030" (0. 6-0. 8mm) Solid Steel; . 030"-. 035" (0. 8-0. 9mm) Flux Cored.
• ★Buy with Confidence--As We Offer 30-Day 100% Satisfaction or Money Back and 1 Year Limited ;
• ★What’s Include--MIG torch, Ground Clamp Cable, Gas Hose, Argon Regulator, . 023” (0. 6mm) & . 035” (0. 9mm) Contact Tips, Welding Mask and Wire. Wire range: 0. 025 in. - 0. 030 inches

User questions & answers

Question:	Is it only for gas or can I use it without gas as well
Answer:	The Lotos Mig 175 I bought can not be used as a Plasma Cutter. It is a Mig only machine. But a darn good one and it comes with a spool gun. I love this welder.
Question:	How long is the weld gun cord
Answer:	Hi, Customer:Thanks for your inquiry.This MIG welder use NEMA 5-50(US National Electrical Manufacturers Association), 50 AMP plug. If you do not have a wall outlet can used for it, you can buy a plug that can be used with your wall outlet. But be make sure, the AMP capacity for the outlet and plug should be larger than 50 AMP. If you have any questions about how to wire or other questions about LOTOS products, please feel free to contact us by [email protected] Technology
Question:	For the "2018" version of this welder, 1) What is the duty cycle at different amps and 2) Is the wire feed mechanism now aluminum (vs. plastic
Answer:	Hello, This welder requires 30AMP Under 220V. So your generator should be larger than 7000 Walt. Thanks for your inquiry Regards Lotos Technology
Question:	Will this weld 16g grese duct (rolled steel
Answer:	Hi, there: It can be only used on 220/240V. For 110V mig welder, please see the below LOTOS MIG140: https://www.amazon.com/Lotos-MIG140-Aluminum-Shielded-Welding/dp/B00S8R1ST4/ Thanks for your inquiry Regards Lotos Technology

Product features

140 A Welding Output

Suitable for welding stainless steel, mild steel, aluminum, and other metal materials.

Welding Capacity:

Stainless Steel: 18 Gauge – 3/16";

Mild Steel: 18 Gauge – 3/16";

Aluminum: 1/8" or Thinner.

Reliable and Durable

Aluminum Wire Feeder:

High quality aluminum wire feeder much more stable and better user experience.

Transformer Technology:

The transformer technology has been proven to be reliable and durable. MIG140 can easily connected to your existing 110V wall outlet and can be setup quickly within 10 minutes.

2017 Upgrade

2T/4T Switch:

Much more convenient for long time welding, Release your finger!

Ground Cable Quick Connector:

The new designed ground cable quick connector makes easy switch between +/-.

Full-adjustment:

Precision full-adjustment drive system with digital wire speed display reduces the chance of wire tangling and crushing.

MIG140 140 Amp MIG Welder

The New 2017 Upgrade Lotos MIG140 is now available with 2T/4T switch and the 2 digital displayers help customers adjust wire feeder speed and welding voltage more precisely. The new designed ground cable quick connector makes easy switch between +/-.

The Lotos MIG140 can be easily connected to your existing 110V wall outlet and quickly setup within 10 minutes or less. It handles industrial standard 4” or 8” wire spools and incorporates a thermal overload protection system to protect your welder.

Diy Handmade Steel Fire Pit Using Lotos MIG140 and LTP5000D

Building a Welding Table Using MIG140 and TIG200

MIG140 Customer Welding Performance

Product description

Specifications - Model: MIG-130; Rated Input Voltage: AC~115V / 230V; Frequency: 60Hz / 50Hz; Rated Input Power: 230V/15 Amp & 115V/30 Amp; Current Range: 130 Amp @ 115V/230V; Rated Duty Cycle: 80% @ 130 Amp; Nominal DC Open Circuit Voltage: 60V; Power Factor: 0.93; Dimension: 12.5 x 7.25 x 11.5 in.; Net Weight: 18.0 lbs.; Packaging Size: 16.73 x 10.74 x 13.38 in.; Packaging Weight: 20 lbs.; Packing List - MIG-130 MIG /Flux Cored Welding Machine; 6-feet Power Cord & N6-50P Plug; 8-feet 150A MIG Torch Gun Assembly; 8-feet 300A Work Clamp Cable Assembly; 230V to 110V Power Adapter; 1 Spool of .030 in. Flux-Cored Wire.; Owner’s Manual.

• MIG-130A adopts the most advanced IGBT inverter technology and has an excellent arc stability, which produces perfect welding effects. All projects can be completed effortlessly and quickly. The current, voltage, and wire feeding speed can be adjusted; furthermore, the wire feeding speed can also be automatically matched according to the current. It is simple and easy to operate, which is very suitable for beginners and professionals alike.
• MIG-130A has a beautiful appearance and incorporates exquisite production technology. It is manufactured in accordance with all industry standards. The output current is 130A at 110V and 220V. Both 0.030" and 0.035" flux-cored wires can be used. The machine is very light and has a user-friendly design, making welding work easy and perfect. This is an ideal machine for home maintenance, professional work, and every task you require.
• With an intelligent power supply system, the welder can automatically detect the input voltage, which allows the machine to automatically adjust. You can also switch easily between 110V and 220V. Extending the power cord by 300 feet can also resist power fluctuations and cable attenuation. It is very suitable for difficult operations on construction sites, docks, agricultural sites and relatively remote areas.
• MIG-130A can achieve perfect welding, and the strength of its components makes it a reliable work tool for professionals and individuals. The package includes a 7-foot power cord, a 10-foot MIG torch assembly, a 10-foot 300-amp ground clamp assembly, and a 230V to 115V power adapter.
• It has a variety of safety protection functions, such as automatic voltage fluctuation compensation, overheat protection, over-current protection, over-load protection, etc. The 80% duty cycle ensures long-term effective welding. The ergonomic lightweight model design makes the machine very easy to carry, and the fan with automatic temperature control makes the machine run very quietly.

User questions & answers

Question:	Is the duty cycle 60% or 80%@130a and I'm assuming it's only for 220v since a 30a 110v circuit is virtually unheard of in the US
Answer:	The 100 ST can handle up to 3/32 rod excellently. With aluminum it is crucial for proper prepping, if you follow the correct procedure this machine will run up to a 3/32 aluminum rod. Thank you for your question.
Question:	Can it fit a kiswel usa k-ngs e-71tgs 0.035in. dia 10lb. gasless-flux core wire welding wire? a ten pound wire not two pounds. thanks
Answer:	I wouldn't try with this welder
Question:	can the polarity be changed on the amico mig 130A
Answer:	I believe China. I can tell you it is a great product my husband hasn't had any issues with it at all works very well
Question:	The description says it it a mig/flux core welder? since it has no gas input. that makes it a flux core-only machine, not a mig
Answer:	Hello! No, this machine can run off of a standard 15A 120V wall outlet. We recommend a 20A 120V wall outlet for best performance. Thank you for your question!

• MULTI FUNCTION MIG WELDER - 230A with MIG/ARC/LIFT TIG gas gasless multi Function 220V DC inverter welder
• GAS&GASLESS AVAILABLE - 1kg/ 5kg 0.030 0.032 (0.8-1.0mm) solid wire with gas welding iron; 0.030 0.032 (0.8-1.0mm) flux-cored wire without gas welding carbon steel and stainless steel
• GREAT DESIGN - Simple design, beautiful, small size, light weight, easy to carry
• QUALITY ACCESSARIES - MB15 MIG -gun, earth clamp, electrode holer, gas tube, portable plug, ready to use
• 1 YEAR WARRANTY - HITBOX MIG250 welder offers good warranty. If you meet any problem when using this machine, please feel freely to contact us at the first time. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence

Product features

Hitbox MIG250 230A MIG welding machine

1. For stainless steel and iron welding,Gas & No Gas Self-Shielded welding machine.
2. Solid wire/flux cored wire is selectable when doing mig welding.
3. Capable for 5kg-15kg roll of welding wire,100% duty cycle can be reached when using 0.8mm wire.
4. Functional machine with MIG,TIG,ARC function,maximum welding rod diameter up to 4.0mm.
5. This machine can be used with power generator,also with easy operation for beginners.
6. Contents all the nessecerry accessories,ready to be used.

How to connect the accessories for differrent function?

• 1pc MB15 MIG gun
• 1pc gas tube
• 1pc earth clamp + 1.5M cable
• 1pc electrode holder + 1.8M cable

Warmly Notice:

The WP-17V tig torch showed in the last picture is not inlcuded in the package.

If you need it, please kindly add it in our store. B077NB63YZ.

B0876YX44P has the WP-17V torch, both of them will be shipped out from US Amazon warehouse, fast ship.

MIG TIG MMA Gas and Gasless Multifunction MIG welder

• Inverter technology: IGBT
• Input voltage: AV220±15%V
• Frequency:50/60HZ
• Welding Process ........Gas MIG/ Gasless MIG/ LIFT TIG / ARC
• Base Material ........Carbon,Stainless,Low-alloy steel
• Applicable thickness: Over 0.8mm
• Wire feed speed: 3-18m/min
• Electrode Diameter(mm) ........ 2.0 /2.5/ 3.2mm, Recommand 2.5mm

The Advantage of MIG welding

• MIG welding produces long, continuous welds much faster than traditional welding methods.
• Since the shielding gas protects the welding arc, this type of welding produces a clean weld with very little splatter.
• It can be used with a wide variety of metals and alloys.

• ★ SUPER DEAL MIG130 Welder is a top of the line household welder that is lightweight, powerful and intuitive. Made of high-class PVC material as well as delicate treatment, this welding machine integrates comfortable grip, easy operation and high precision.
• ★ Uses convenient Flux - Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part.
• ★ User-friendly interface - Makes set-up a snap with easy to access advanced options. SUPER DEAL mig130 gives you the power to tackle the biggest jobs with ease and confidence. Ready to weld out of the box.
• ★ Variable Feed Speed Control - Easily adjust current flow by adjusting the 4 buttons for MIN/MAX,1/2. Also features a wire feeding speed adjust rotary knob. 10 levels of wire feeding speeds for your choice. Torch With Full On / Off Safety Control
• ★ Compact and powerful - Weighs only 38 lbs. deal for shop, home or field use. Perfect for welding mild steel and stainless steel. Comes with a reel of 0.9mm, 0.55lbs welding wire, a protection mask and a brush/Chipping Hammer. 2.5M Torch, xtra 2 Tips and Ground Cord. Just what you're looking for, right?

User questions & answers

Question:	How long is the ground lead
Answer:	only use out side with flux core
Question:	Can you use 045 flux wire gas less on this
Answer:	Just the 2 lb spool anything larger would not fit.
Question:	Can someone direct me to a good wire to buy this? First time welding, assume I am dumb as a rock. Thanks
Answer:	and not even welding axes but if plates 3/16 "thick
Question:	Can I weld aluminum tube
Answer:	I purchased this about a year ago. I would recommend a better visor/helmet and a pair of welding gloves and a heavier slag hammer. The accessories that come with are pretty cheap. As for the machine itself it is pretty much ready to go and a great welder. Whom ever this is for will need to purchase appropriate wire for specific projects. It does come with some generic all purpose wire
Question:	Can you convert this into gas mig
Answer:	I found the duty cycle to be about 50% on 120V running 80A. Use a dedicated 20A plug. I was very surprised and pleased with its performance on 120V.
Question:	can you use a larger spool of wire or just the 2 pound spool
Answer:	No it can not it only holds up to 4" spoil
Question:	can this weld perch plates to an axle
Answer:	No, it can not.
Question:	I am thinking of buying this as a Present. What else do I need to buy to go with it
Answer:	False advertisement. They need to fix themselves.

Product features

STEP-REGULATED & EASY OPERATION

• Made of high-class PVC material as well as delicate treatment, this welding machine integrates comfortable grip, easy operation and high precision.
• It also uses wave form control technology with adjustable inductor, so that the inductance can be adjusted according to different welding requirements. This helps to ensure soft electric arc, increased fusion depth, reduced spatter, as well as good welding performance.

AUTOMIG CONTROL PANEL

The digital soft key control panel is intuitive and provides a clear overview at all times.

It comes with a range of wire feed speed and temperature controls that allows you weld on steels with different thicknesses.

The display is readily accessible and easy to operate, even with your welding gloves on. This reduces the risk of operating errors.

METAL TIP

Equipped with metal tip at the end of the gun.

The copper tip does not allow slags to build up when you are welding. While this welder metal chip gets a bit of build up after you might have used it for some time, so you can switch them yourself easily with the extra tips that come with the welder.

THERMAL OVERLOAD PROTECTION

Welder includes a cooling fan and thermal overload protection to help protect your investment.

Specifications:

• Voltage: 110 V / 60 Hz Single Phase
• Welding Current:50-120 AMP
• Duty Cycle:
• 10% at 105AMP
• 35% at 60 AMP
• Max open voltage: 37V
• Weld able wires: 0.023'' to 0.035'' steel and carboon steel, 0.030'' to 0.035'' flux-cored

Welding Face Shield Helmet

Handy basic mask - you can immediately get started with your project as quickly as possible.

Wire Brush

Wire brush removes rush, scale and flaking paint

Use to roughen smooth surfaces before applying adhesives

Ground Clamp

Premium quality brand-new rarth ground clamp and welding cable set.

Desirable for hobbyists and welding enthusiast around the world.

FITS IN EVERYWHERE

Its relatively small size allows for convenient storage, and due to its portability, it is very useful if you have a bigger project in mind that will require repositioning.

Put it on the shelf, in the back of your car or in your tool trolley.

Handy, portable and compact - the carrying handle makes it easy to bring along.

Product description

MIG155Gsv is both MIG and self-shielded flux cored welding machine, which is equipped with unique electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed transfer resulted in better performance than other machines. Compared with silicon controlled welding machine and tapped welding, our products have the following advantages: stable wire feed rate, portable, energy-saving, electromagnetic noise free. Besides, our products spatter less, easier arc starting, deep welding pool, high duty cycle etc.

• Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
• Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
• Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
• This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
• The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.

User questions & answers

Question:	Would the predator 9000 generator with 7250 continues run this and your larger inverter welders
Answer:	The Hobart IronMan 230 is made in the U.S.A. and backed by Hobart's industry-leading 5-3-1 industrial warranty. You get a 5-year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes; a 3-year warranty on drive systems, PC boards, solenoid valves, switches and controls; and 1-year warranty on plasma torches, MIG guns, relays, contactor, triggers, regulator, accessories, spoolguns, battery, field options and running gear. (90-day limited warranty for industrial use). Normal wear items such as drive rolls, contact tips, nozzles, gas diffusers, plasma torch tips, electrodes and weld cables are not covered under this warranty.
Question:	Where can I get a new welding torch that’s longer than the one supplied with this welder will the US pro welding 15 footer fit on this welder
Answer:	My welder only came with .030 tubular 0.035 solid wheel. I recall that being an order able accessory. Not 100% sure but I thought it was suppose to have a #2 roll of FC. Overall, it’s been a damn good welder and I’d recommend it.
Question:	Can use 10 pound spool wire
Answer:	We ship this item at no charge. Thank you
Question:	When using 110V, can you effectively weld 1/4”? If not, what’s the maximum capacity when using 110V
Answer:	I think what you are asking is what the duty cycle is. It all depends on the heat setting you are using at the time. The duty cycle at about 140 amps is close to 100%, and drops to about 30% at 250 amps. I don't know what you will be welding, but even on pretty heavy iron (3/8" or so) using .035 solid wire and co2/ argon gas, I seldom ever use more than 125, to 140 amps, so I never exceed the 100% duty cycle. But I also very seldom have long enough welds at a time to matter. The welder I had before I bought the Ironman 230, was just a 150 amp with about a 30% duty cycle at 120 amps, and it was still going after nearly 30 years, and I used it for some pretty big projects.