13 best oxy acetylene torch kits
Oxy-acetylene torch kits are essential welding and cutting tools used in various industries and applications. These kits utilize a combination of oxygen and acetylene gases to generate a high-temperature flame for welding, brazing, soldering, and cutting metals. Here's what you need to know about oxy-acetylene torch kits:
Components: Oxy-acetylene torch kits typically include several components:
- Oxygen and Acetylene Tanks: These are high-pressure cylinders that store the gases needed for the torch.
- Regulators: Gas regulators are attached to the tanks to control and regulate the flow of oxygen and acetylene gases to the torch.
- Torch Handle: The torch handle is where the operator holds and controls the torch. It includes valves to control the flow of gases and an ignition system.
- Cutting Attachment: If the kit is used for cutting, it may include a cutting attachment that can be mounted on the torch handle.
- Various Tips and Nozzles: Different tips and nozzles are used for various welding, brazing, or cutting applications.
- Hoses: Flexible hoses connect the regulators to the torch handle, allowing the gases to flow from the tanks to the torch.
Fuel Gases: Oxy-acetylene torches use a combination of oxygen and acetylene as fuel gases.Acetylene is highly flammable and produces a hot, concentrated flame when combined with oxygen.
Applications: Oxy-acetylene torch kits are versatile and can be used for a wide range of applications, including:
- Welding: Joining metals together by melting their edges and fusing them.
- Brazing: Joining metals using a filler material that melts at a lower temperature than the base metals.
- Soldering: Joining metals with a lower-temperature filler material, often used for electrical connections.
- Cutting: Severing or removing sections of metal using a high-temperature flame.
- Heating: Oxy-acetylene torches can also be used for localized heating, such as for bending or shaping metal.
Safety: Working with oxy-acetylene torches requires proper safety precautions due to the high heat and pressure involved. Safety equipment such as welding goggles, flame-resistant clothing, and fire extinguishers should be readily available and used as needed.
Regulation: Properly regulating the flow of oxygen and acetylene is crucial for safe and efficient operation. Regulators control the pressure of the gases to ensure they reach the torch at the desired rate.
Maintenance: Regular maintenance of oxy-acetylene torch kits is essential to ensure their safe and efficient operation. This includes inspecting hoses, valves, and regulators for damage and leaks, as well as ensuring proper storage and handling of gas cylinders.
Skill and Training: Operating oxy-acetylene torch kits requires training and experience. Welders and operators should be knowledgeable about the equipment and techniques to perform tasks safely and effectively.
In summary, oxy-acetylene torch kits are vital tools for welding, brazing, soldering, and cutting metals. They consist of various components, including gas tanks, regulators, torch handles, and hoses, and are used with oxygen and acetylene gases. Proper training, safety precautions, and maintenance are essential for the safe and effective use of these tools in welding and metalworking applications.
Below you can find our editor's choice of the best oxy acetylene torch kits on the market
ZenStyle Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case
- 【Top Quality】Our cutting torch and welding kit adopt high quality strong materials with heavy duty construction.Durable and sturdy for use.The set includes oxygen regulator,torch handle,acetylene regulator.
- 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B;Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders.
- 【Considerate Design】The welder tool set comes with readable and legible dual scale 2-Inch gauges.And a large brass handle is designed for smooth,accurate adjustments.
- 【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip cleaners and spark lighter.There is a heavy duty molded storage case packing a spanner for easy carrying and transport.
- 【Wide Range Uses】The gas welding kit is perfect for amateur metalworker or seasoned professional with business or home application.Ideal for many occasions such as welding,soldering,brazing,rivet cutting,hard-facing and metal heating process. Tips: Take the set to your local welding supply if you don't know what tanks to buy to complete this,they will fit you proper tanks needed.
User questions & answers
| Question: | Will uniweld torch tips work with this kit |
| Answer: | I don't know. I bought mine a while back. |
| Question: | Want to get these as gift. what tanks should i buy to complete this and get it ready for use? (size, name type? i have no clue) answers appreciated |
| Answer: | My dad in a different state need it so I got it shipped to his house. Sorry have no idea |
| Question: | Will these gauges fit the non-refillable oxygen and map gas bottles? Also, can i use the acetylene gauge for map gas |
| Answer: | No they are not and the oxygen regulator does not read accurately at the low 2-4 pound level that I need often. Had to replace it with a better guage. |
| Question: | Will this kit fit MC acetylene and R oxygen tanks |
| Answer: | This kit will just need a cutting tip designed for propane purposes. The acetylene regulator will technically work with propane as it designed to connect to another CGA-510 valve. The kit also comes with a grade t hose which is appropriate for running with fuel gases aside from just acetylene. |
Victor Technologies 0384-0945 Victor G150-J-P Tote Without Tanks
ESAB
Product description
Victor tote kit without tanks design features an ergonomic carrying handle, built-in storage case and a functional balanced design. Each outfit includes the components needed to tackle jobs from light duty welding, to specialized brazing, to cutting steel. Victor commitment to quality and safety are built into their outfits.
User questions & answers
| Question: | What diameter tanks fit in the tote |
| Answer: | You can only AFTER you convert it to gas and use CO2 |
| Question: | Will the cap n hook fit |
| Answer: | Noh |
| Question: | Where can i find victor rosebud/heating tips for this |
| Answer: | This is a 70 amp out put. This is gasless only . Use flux core wire .035 |
| Question: | Does the acetelyne regulator fit mc tanks |
| Answer: | The output range is 35-88 amps, but the recommended output is 70 amps at 20%. |
| Question: | Can I weld aluminum |
| Answer: | I normally weld with my hood approximately 6 to 8 inches away from my weld if possible. Lens reaction is almost instant. |
| Question: | stas soldadora necesita gaso trabajas Sin ganas |
| Answer: | The screen of EH-091X is larger then M800H, the materil of EH-091X is PA,the M800H pp |
| Question: | What is the difference between this one and Pro Core |
| Answer: | Because that’s what you get for thinking anyone cares about your order. |
| Question: | What is the maximum amperage output |
| Answer: | It depends on what Voltage/Amperage you set your machine on. Keep in mind that a lower/brighter shade setting means the bright arc will wash out details and you won't able to see well. On the other hand, too dark will wash out the puddle and you can't see where you're going. It's also about comfort and if you want to see more puddle or more of the arc. |
Product features
Lincoln Electric K2278-1 Handy Core
The Handy Core wire feeder welder from Lincoln Electric is a tremendous asset when home repair or hobby projects are in your game plan. It's a great pick for welding 18 gauge to 1/8" mild steel and comes with everything you need to get started fast. This package sports a gun and cable assembly, work lead, work clamp and input power cable – all attached at the factory to save you time. A spool of self-shielded, flux-cored wire electrode, welding handshield, and chipping hammer/brush round out the line up. So, don't delay – add the Handy Core to your tool shed or garage today!
- 35-88 amps output.
- Welds up to 1/8 in. mild steel.
- Plugs into household 115V, 20 amp outlet.
- Cold contactor safety feature keeps welding wire electrically “cold” until gun trigger is pressed.
- Compact, portable, lightweight and easy to use.
VictorESAB Victor 0384-2125 Performer 540/510 EDGE 2.0 Outfit
VictorESAB
Product description
The robust Performer EDGE 2. 0 Outfit comes with everything you need to get started: CA1350 cutting attachment, WH100FC welding handle, cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, heating nozzle and two EDGE 2. 0 regulators.
- Cuts up to 6 in. (152. 4 mm) and welds up to 1/4 (6. 4 mm) with accessories
- ESS32 Series regulators
- CA1350 cutting attachment
- WH100FC torch handle with built-in flashback arrestors and check valves
User questions & answers
| Question: | This item is listed on ioc welding supplies with a $30 rebate. is that rebate available through this seller |
| Answer: | No this kit is for Acetylene only. The propane kit would be 0384-2692. |
| Question: | What size are the hose couplings |
| Answer: | The torches are slightly longer than the light/mediam ones measuring at 17". They are also slightly heaver to but not much. The check valves should be what is normally referred to as flash back arresters to stop flames from traveling Bach into the bottles. Overall the are a good set so toches. |
| Question: | Are these edge 2 regulators |
| Answer: | 350 is heavy duty will cut and weld thicker material produce more heat |
| Question: | What does it take to work with proane |
| Answer: | Yes! They are approximately 20' in length. |
Hobart 770502 Medium Duty Oxy-Acetylene Kit
Hobart
Product description
Medium duty outfit versatile yet economical, this "HOBART" outfit includes many features found in more expensive outfits. The HOBART TOUGHCUT is perfect for a multitude of applications such as farm, ranch, hobby, automotive, refrigeration, light fabrication and repair. This outfit is designed for use with acetylene fuel gas but can operate on propane by simply changing to propane tips. Cuts up to 6-Inch (153mm) and welds up to 1/2-Inch (13mm) with optional tips.
- Perfect for a multitude of applications; Welder / Cutter :Type Plasma Cutter
- This outfit is designed for use with acetylene fuel gas but can operate on propane by simply changing to propane tips.
- Medium duty outfit versatile yet economical
- NOTE: User manual is attached - kindly refer it
User questions & answers
| Question: | How do I figure out what other torch tips fit the handle? Been looking, but completely baffled by the choices, variations, and whatnot |
| Answer: | You can only AFTER you convert it to gas and use CO2 |
| Question: | Can the small tanks be used |
| Answer: | Noh |
| Question: | Will uniweld torch tips work with this kit |
| Answer: | This is a 70 amp out put. This is gasless only . Use flux core wire .035 |
| Question: | Does this kit include backflow preventers |
| Answer: | The output range is 35-88 amps, but the recommended output is 70 amps at 20%. |
Yescom Portable Weld Torch Tank Kit Twin Tote Oxygen Acetylene Oxy Cutting Brazing Welding Goggles DOT
Yescom
Product description
- Portable welding Oxygen/Acetylene torch kit with regulators, tanks and brass torch assembly, for brazing, cutting, bending and forming in industrial places
Specifications:
- Overall Dimension(LxWxH): 24 7/16" x 12 3/8" x 10 7/16" (62 x 31.5 x 26.5 cm)
- Oxygen Cylinder Capacity: 3.6 L
- Acetylene Cylinder Capacity: 2 L
- Twin Welding Hose Length: 13 1/12 ft (4 m)
- Material: Cylinders: ST14
- Torch Handle: Brass
- Carrying Tote: Polypropylene
- Certification: DOT
- Net Weigh: 39.68 Lbs (18 kg)
- Oxygen pressure: 0.15 to 0.3 MPa
- Acetylene pressure: 0.015 to 0.02 MPa
- Propane pressure: 0.02 to 0.3
- Oxygen pressure: 0.15 to 0.5 MPa
- Acetylene pressure: 0.02 to 0.07 Mpa
- Propane pressure: 0.02 to 0.1 MPa
- Material: Brass
- Pressure Gauge Diameter: 1 1/2" (3.81 cm)
- Sintered copper filter
- Backward Inlet Structure
- Maximum pressure of gas inlet: 23 MPa
- Maximum pressure of gas outlet: 1 MPa
- Maximum flow: 20 m?/h
- Maximum pressure of gas inlet: 2 MPa
- Maximum pressure of gas outlet: 0.1 MPa
Package Contents:
- 1x Oxygen Regulator
- 1x Acetylene Regulator
- 1x Cutting Attachment
- 1x Welding Tip
- 1x 3.6L Oxygen cylinder (empty)
- 1x 2L Acetylene cylinder (empty)
- 1x Twin Welding Hose
- 1x Spark Lighter
- 1x Cutting Torch
- 1x Torch Handle
- 1x Welding Goggles
- 1x Black Carrying Tote
- 1x manual
Notice: GAS is NOT included
- Portable Design - All in one portable design for convenient carrying
- Various Use - For iron or steel welding, brazing, cuttin, bending and forming
- DOT Guarantee - DOT certification for ensuring high-quality tanks and keeping safety
- Durability - Brass torch handle and cutting attachment for long service life
- Wide Application - Ideal for industrial or art use, such as automotive repair, air conditioning, refrigeration and metal sculpture
User questions & answers
| Question: | Do the tanks have DOT numbers |
| Answer: | No, we don't have DOT number for each tank. |
| Question: | Are the tanks DOT approved |
| Answer: | Yes, they are. |
| Question: | Cylinder good for refilling |
| Answer: | Yes, it is. All in one portable design for convenient carrying and ideal for industrial or art use, such as automotive repair, air conditioning, refrigeration and metal sculpture. |
| Question: | Do they run out quick cause having small tanks |
| Answer: | They are very good. |
Victor Technologies 0384-0948 Victor G150-J-Cpt Tote with Tanks
ESAB
Product description
Victor tote kit with tanks is a new tote design that features an ergonomic carrying handle, built-in storage case and a functional balanced design. Each outfit includes the components needed to tackle jobs from light duty welding, to specialized brazing, to cutting steel. Victor commitment to quality and safety are built into their outfits.
User questions & answers
| Question: | Will these regulators also work on large tanks |
| Answer: | No |
| Question: | What is the difference between the 0384-0948 and 0384-0946 kits |
| Answer: | That would depend on the size of the tanks. If you are trying to use the really small tanks 20-40 LB. tanks you will need an adapter, that can be purchased at any local welding supply (where ever you get your tanks). |
| Question: | Are the tanks made in the usa |
| Answer: | I can't say for sure. However it indicates it is made in US. I have had no problem with mine at all. I have had it for about 1.5 years and use it regular with no problem. I consider it a good product for the price. |
| Question: | What is the difference between 0384-0948 and |
| Answer: | No, the regs are for full sze tanks |
Ameriflame T100AT Medium Duty Portable Welding/Brazing Outfit with Plastic Carrying Stand Plus Oxygen & Acetylene Tanks
Product description
A lightweight medium duty portable welding/brazing outfit with carrying stand. For commercial heating, ventilation, air conditioning and plumbing applications. Unitized packaging includes Oxygen and Acetylene cylinders (shipped empty). Cylinders are UN/ISO Stamped, DOT and TC Approved. The UN/USA high-pressure cylinders are manufactured to UN-ISO-9809-1 and 2 specifications. The industry, for years has been purchasing/using cylinders built to, tested to and approved to a DOT domestic code. An ISO certified cylinder is a universally accepted cylinder, and as such supersedes the DOT certification and can be filled/used under virtually any governing jurisdiction, including DOT and TC Canada. Physically they are the same cylinders that have been used for years. The cylinders have the same metallurgy, valves, and safeties. The markings however are different. The stamping layout details the marking scheme of the new ISO/UN/USA. A notice published by DOT several years ago informing the public of PHMSA (Pipeline and Hazardous Material Safety Administration) adoption of HM-220E. The adoption of HM-220-E allows a shipper to use either a DOT specification cylinder or a UN standard pressure receptacle, as appropriate for individual gases, and circumstances in the USA. Below is the public notice link to the DOT website: Guide To HM-220E Final Rule - ISO/UN/TC Cylinders.
http://www.phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/PHH50_0078_0706_UN_Cylinders.pdf
- Weld up to 1/8" steel and Braze copper tubing up to 1" with supplied tips.
- 12 piece outfit includes: Oxygen regulator, Acetylene regulator, front valve torch handle, Type17-0 and Type17-2 weld/Braze tips.
- Outfit also includes: safety goggles, 12.5-Feet twin hose set, "A" connection, flint lighter, tank key, R Oxygen tank and Mc Acetylene tank, plastic carrying stand.
- Cylinders included: 20 cubic feet "R" Oxygen cylinder (empty) and 10 cubic feet "Mc" Acetylene cylinder (empty).
- Cylinders are UN/ISO Stamped, DOT and TC Approved.
User questions & answers
| Question: | Are both oxygen and acetylene tanks DOT certified |
| Answer: | Hi, Good morning Yes |
| Question: | Will regular size regulators and hoses fit and connect to these small bottles |
| Answer: | United refrigeration |
| Question: | Will the acetylene regulator handle MAP gas without damaging its internals |
| Answer: | I had to replace acetylene regulator mine did not work on any tank from praxair. So no good everything else work ok the hose that come with it is cheap but it works |
YaeTek 12PCS Oxygen & Acetylene Torch Kit Welding & Cutting Gas Welder Tool Set with Welding Goggles
Product description
Description:
- This Is a Brand New Complete Oxygen Acetylene Welding And Cutting Kit, used for Cutting, Welding, Heating with precision and efficiency. - Heavy Duty Metal And Brass, Durable and Strong. - Copper Pipes, Welding Pipe Connector, Cutting, Aluminum Pin, Iron Chrome-Plated Igniter, Copper Joint. - A great tool For both An Amateur Metalworker and A Professional.
- Material: metal, brass
Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint(9/16"), 1 wrench, 1 welding goggles, 1 storage box
- Application - Welding and Cutting -- This YaeTek gas welding torch kit is used for cutting, welding, heating, with precision and efficiency.
- Material -- heavy duty metal and brass, with high strength, durability, longevity. This welder torch Kit tool set is a great choice for both an amateur metalworker or a professional.
- With a divisional box, convenient and easy to carry.
- Easy to use for your welding work.
- Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint, 1 wrench, 1 welding goggles, 1 storage box
User questions & answers
| Question: | What size are the hose fittings? i need the cutting torch to fit to a victor g150-j-pt set |
| Answer: | You are better off getting fittings from victor for your torch the seals where crap |
| Question: | what size are the 3 torch tips supplied |
| Answer: | The tips are marked 1#, 2#, and 3#, with an orifice (opening) size of .022, .032, and .042 inches respectively, measured with a Vernier caliper. |
Ameriflame TI100AT Medium Duty Portable Welding/Cutting/Brazing Outfit with Plastic Carrying Stand Plus Oxygen and Acetylene Tanks
Product description
A lightweight medium duty portable cutting/welding/brazing outfit with carrying stand. For commercial heating, ventilation, air conditioning and plumbing applications. Outfit Includes: Oxygen Regulator, Acetylene Regulator, Front Valve Torch Handle with Check Valves, Type17 #0, #2 Weld/Braze Tips, CA100 Cutting Attachment, and CT100-0 Cutting Tip. Packaging also includes oxygen and acetylene cylinders (shipped empty). Cylinders are UN/ISO Stamped, DOT and TC Approved. The UN/USA high-pressure cylinders are manufactured to UN-ISO-9809-1 and 2 specifications. An ISO certified cylinder is a universally accepted cylinder, and as such supersedes the DOT certification and can be filled/used under virtually any governing jurisdiction, including DOT and TC Canada. Physically they are the same cylinders that have been used for years. The cylinders have the same metallurgy, valves, and safeties. The markings however are different. The stamping layout details the marking scheme of the new ISO/UN/USA. A notice published by DOT several years ago informing the public of PHMSA (Pipeline and Hazardous Material Safety Administration) adoption of HM-220E. The adoption of HM-220-E allows a shipper to use either a DOT specification cylinder or a UN standard pressure receptacle, as appropriate for individual gases, and circumstances in the USA. Below is the public notice link to the DOT website: Guide To HM-220E Final Rule - ISO/UN/TC Cylinders.://.phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/PHH50_0078_0706_UN_Cylinders.pdf
- Weld up to 1/8" steel and Braze copper tubing up to 1" with supplied tips.
- Cut up to 1/2" steel with supplied tip
- Braze copper tubing up to 1" with supplied tips
- Outfit also includes: safety goggles, 12.5-Feet twin hose set, "A" connection, flint lighter, tank key, R Oxygen tank and Mc Acetylene tank, plastic carrying stand.
- Cylinders included: 20 cubic feet "R" Oxygen cylinder (empty) and 10 cubic feet "MC" Acetylene cylinder (empty)
- Cylinders are UN/ISO Stamped, DOT and TC Approved.
User questions & answers
| Question: | How big are these tanks |
| Answer: | No, as long as the thank is at least 1/2 way empty !!! If is too low it might affect the performance of your work ... |
| Question: | made in china |
| Answer: | 3b and 4b are the same they just come with different tips x-3b comes with A3 and A11 which would work good for what you are asking x-4b I believe comes with A5 and A14 tips |
| Question: | what is the gas capacity of the oxygen and acetylene tanks |
| Answer: | For a small refrigerator in confined space I would use a A-3 tip smaller flame and safer, but if the line is 3/8 to a 1/2 inch I would use a A-11, I suggest going to Home Depot buy a small roll of copper tubing and practice first once you are comfortable with your brazing skills then start the job every HVAC tec / welder takes time to practice. |
| Question: | Los tanques traen carga |
| Answer: | Not going to my truck to measure but it's really long, I'm using the kit for the smaller tank (gotta double-check that) and I have too much length. |
| Question: | Need a new tank amount gage for my turbo torch |
| Answer: | I have no idea. It's still in the case and I've never used it! |
| Question: | Which one for hvac brazing this the x-3b or x-4b? brazing with silver rod typically on 1" and smaller copper tube |
| Answer: | The tip that comes with this kit will work fine. Big does not mean better. |
| Question: | What size tip is the best or recommended for small lines on a refrigerator? For compressor and evaporator replacement |
| Answer: | Unsure what the question is? |
| Question: | Do they make a.6ft hose turbo torch |
| Answer: | Not familiar with hooking the hose to that type of gas source. Never seen that hook up before. I really don't think that is compatible. The red gas hose has left handed threads. The green for oxygen is right hand threads. Hope this helps. |
Torch - Oxy-Acetylene Tough Cut Outfit
Miller Electric
Product description
The gas welding outfit includes cutting attachment, torch handle, heating head, pressure regulators of type 30-15-510 acetylene regulator, 30-100-540 oxygen regulator, welding nozzles and cutting tips.
- Fuel: Acetylene
- Cutting Attachment: CC509P
- Torch Handle: CW5A
- Standards: ETL or UL
- Installation method: gas-welding
User questions & answers
| Question: | What is the diference between the mb54a-300 and the mb55a |
| Answer: | Here is a link from the manufacture showing the differences between the models. https://www.millerwelds.com/shop/compare-variants?product=15640b5ec765413a8169b58efc53843f |
| Question: | Is this Canadian pricing |
| Answer: | Our pricing is in US dollars & we only ship within the continental united states. |
| Question: | Is it compatible with Victor |
| Answer: | Some people have reading problems who answer this question, no it is not COMPATIBLE with Victor. People are confusing COMPATIBLE with comparable. This torch is a Smith torch, it will take Smith tips, not Victor. |
| Question: | Is this a Smith or Smith related torch |
| Answer: | Yes, it is a Miller/Smith (Miller owns Smith now) torch. |
| Question: | Can i get cutting torch only |
| Answer: | Please buy from ASIN B07F3DLPF9 |
| Question: | can someone tell me the approx. shipping weight of this kit |
| Answer: | prime get free shipping. |
| Question: | If the tanks are not DOT approved is it going to be difficult to have them filled |
| Answer: | These are not DOT approves so you may have some difficulty it just depends on where you fill the item |
| Question: | Are the tanks DOT certified |
| Answer: | tanks are not DOT approved |
Product features
Oxy Welding Cutting Weld Torch Tank Kit
- Light duty acetylene (VLAR-18) and oxygen (VLOR-18) rear mount regulators
- Medium duty torch handle (VTHM-22) and cutting attachment (VCAM-22)
- Cutting tip (0-3-101) cuts up to 1/2"
- Welding nozzle with mixer (0-W-1) welds up to 5/64
- 12.5 feet of 3/16" twin “T” grade hose with CGA “B” fittings
- Glasses, Spark Lighter & Check Valves
Gas Welding Cutting Kit Oxy Acetylene Oxygen Torch Brazing Fits VICTOR W/Hose
Product description
The tool is ready for both welding and cutting. It’s for gas welding, brazing and flame cutting with the oxygen-acetylene method. Sturdy and durable kit tool Heavy duty construction. Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process. Packed in ABS case Lighter weight, easy to carry Suitable For Home And Business Applications Weight: 16lbs Content: 1 x Oxygen regulator 1 x Acetylene regulator 1 x Cutting attachment 1 x Cutting handle 1 x Cutting nozzle 1 x Heating pipe 3 x Welding pipe 1 x Tip cleaner 1 x Welding goggle 1 x Spark lighter 1 x 4.0m twin color gas rubber hose with connector 1 x Wrench
- Sturdy and durable kit tool
- Heavy duty construction.
- Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing
- Packed in ABS case
- Lighter weight, easy to carry
User questions & answers
| Question: | how long is the hosing |
| Answer: | The turbo torch only works with acetylene B tanks. Mop and propane will not work on this set up. But you can solder with this torch and acetylene |
| Question: | Tip size? Thank you |
| Answer: | Could be 3 things. Regulator not turned all the way up, clogged jet on the tip, or your tank is empty |
| Question: | You can indicate the depth of cut and the depth of welding |
| Answer: | This tourch works fine for 1400 degrees F I dont know what silvers melting point is. |
| Question: | i just received my welding kit - but can't figure out how to attach hose to my bernzomatic fuel 1.4oz size - any help is appreciated |
| Answer: | If you are referring to small lp tanks it won't work, this is for acetylene. |
| Question: | I am a plumber and I want to use the storage for soldering copper pipes will it work can I use it on propane or mop gas what's the smallest tang possiwhat's the smallest tank possible to adap |
| Answer: | No, the tanks come separately. |
| Question: | My torch makes a poping noise and doesn't want to stay lit. i'm using acetylene tank with the the adapter (from cga 200 mc to cga 520 b). what's wrong |
| Answer: | No, there are not flashback arrestors in this kit. You can purchase them separately. |
| Question: | How would this torch work for silversmithing |
| Answer: | It has so many different parts , hard to say . You may be able to get that information on Uni Weld's Web site . |
| Question: | What adapter do I need to use it with the small things from Home Depot |
| Answer: | Does not include tanks |
Victor Technologies 0384-0946 Victor G150-J-Pt Tote with Tanks
ESAB
Product description
Victor tote kit, oxy-acetylene, with tanks features an ergonomic carrying handle, built-in storage case and a functional balanced design. Each outfit includes the components needed to tackle jobs from light duty welding, to specialized brazing, to cutting steel. Victor commitment to quality and safety are built into their outfits. This tote kit includes an Oxygen regulator (spk-540r), a fuel regulator (SKR-540R), a 12.5 inch dual "a" 3/16 inch hose (252-03P), Goggles, check valves and a striker. The process is oxy-acetylene. The industrial applications include high capacity and HVAC.
User questions & answers
| Question: | Do they come with the tanks |
| Answer: | Please read the description, it does not state tanks. BW |
| Question: | Are the torch fittings 9/16"- 18 UNF |
| Answer: | No they are A fittings 3/8-24 unf |
| Question: | Can you use propane in place of acetylene with this torch and regulator |
| Answer: | U need a better hose the propane will leak thur that hose |
| Question: | what size are the tanks |
| Answer: | The Oxygen tank size is 20 cubic feet, Type "R", the Fuel tank size is 10 cubic feet, Type "MC". |
Victor Technologies 0384-2540 Medalist 250 System Medium Duty Cutting System, Acetylene Gas Service, G250-15-510 Fuel Gas Regulator
ESAB
Product description
This medium duty system cuts up to 1/2" (12.7 mm) or 5" (127.0 mm) with optional tips. It welds up to 5/64" (2.0 mm) or 1.25" (31.8 mm) with optional nozzles. The system includes: Medium duty construction, RM-grade hose 20' x 3/16" (6.1 M x 4.8 mm), Striker and soft-sided goggles.
User questions & answers
| Question: | Does this work with propane |
| Answer: | i dont have a preformer |
| Question: | How thick of metal can this cut, like how many inches |
| Answer: | Just like the box |
| Question: | Will this work on small tanks |
| Answer: | The new style. |
| Question: | Is there larger welding tip available with this torch? please write back if you actually know with certainty. no more "i think so?" not useful |
| Answer: | No hose was included |
Latest Reviews
View all
Avalon Pencils
- Updated: 12.07.2023
- Read reviews
Patio Rocking Chairs
- Updated: 14.05.2023
- Read reviews
Little Tikes Toys For 4 Year Girls
- Updated: 24.03.2023
- Read reviews
Helmet To Helmet Communication
- Updated: 25.04.2023
- Read reviews
Riding Clothes For Women
- Updated: 23.04.2023
- Read reviews