9 best miller welding machines

Product description

'Also known as shielded metal arc welding (AKA SMAW welding), a stick welder is typically lighter and more portable than MIG welders and TIG welders, and requires no gas. The word “shielded†comes from the flux coating on the “sticks†that creates a shielding gas when heated to keep contaminants out of the weld. Here are some important details for Miller Electric Stick Welder. Input Voltage: 120/240V, Application: Garages, Job Shops, Farms, Ranches, Maintenance and Repair, Light Fabrication, Shipbuilding, Duty Cycle: 30%.'

• Price For: Each Input (Amps): 25, 37 Features: Hot Start(TM) Technology, Infinite Amperage Control, High Weld Output, Dual Voltage Capability with Multi-Voltage Plug Adapters, Miller's True Blue(R) Warranty Welding Amp Range High: 20-160 Phase: 1 Polarity: DC Series: Thunderbolt(TM) Rated Output: AC: 75A/120V/20%, DC: 160A/240V/30% Output Amps @100% Duty Cycle: 35A, 85A
• Application: Garages, Job Shops, Farms, Ranches, Maintenance and Repair, Light Fabrication, Shipbuilding Duty Cycle: 30% Overall Depth (In.): 13-3/8 Item: Stick Welder Amps DC: 20 to 160 Output Range (Amps): 20 to 80, 20 to 160 OCV: 91 Output Amps @20% Duty Cycle: 75A Welding Range (Amps DC): 20-160 Overall Height (In.): 10-1/2 Input Voltage: 120/240V Welding Amp Range Low: 20-80
• Standards: ANSI/IEC and CSA Approved Overall Width (In.): 7-1/8 Includes: 10 ft. (3 m) No. 4 electrode cable with heavy-duty electrode holder, 10 ft. (3 m) work cable with clamp, 6.5 ft. (2 m) power cord with MVP plugs for 120V and 240V, Cable pouch Welding Processes: Stick Hz: 50/60 Country of Origin (subject to change): China

User questions & answers

Question:	Why is it 200 dollars more than the suggested retail price
Answer:	That is not a satisfactory answer. The MSRP should reflect the quality already, you're just jacking up the price for no good reason.
Question:	Can you weld 1/8inch rods with this machine
Answer:	Yes you can use 1/8 all day. I dont like it for open root welds it cuts the arc too easy. I would recommend if you buy this machine not to use the electrode holder or the ground clamp it comes with the cables are very short as well I took my quick connects apart and put 15ft cables on with a better electrode holder
Question:	Is this machine generator friendly
Answer:	yes
Question:	how many amps does it put out
Answer:	Not sure
Question:	Can I weld aluminum
Answer:	You can only AFTER you convert it to gas and use CO2
Question:	stas soldadora necesita gaso trabajas Sin ganas
Answer:	Noh
Question:	What is the difference between this one and Pro Core
Answer:	This is a 70 amp out put. This is gasless only . Use flux core wire .035
Question:	What is the maximum amperage output
Answer:	The output range is 35-88 amps, but the recommended output is 70 amps at 20%.

Product features

Lincoln Electric K2278-1 Handy Core

The Handy Core wire feeder welder from Lincoln Electric is a tremendous asset when home repair or hobby projects are in your game plan. It's a great pick for welding 18 gauge to 1/8" mild steel and comes with everything you need to get started fast. This package sports a gun and cable assembly, work lead, work clamp and input power cable – all attached at the factory to save you time. A spool of self-shielded, flux-cored wire electrode, welding handshield, and chipping hammer/brush round out the line up. So, don't delay – add the Handy Core to your tool shed or garage today!

• 35-88 amps output.
• Welds up to 1/8 in. mild steel.
• Plugs into household 115V, 20 amp outlet.
• Cold contactor safety feature keeps welding wire electrically “cold” until gun trigger is pressed.
• Compact, portable, lightweight and easy to use.

Product description

' MIG Welder, Millermatic 211, Welding Processes MIG/Flux Core, Input Voltage 240VAC, Welded Material Aluminum, Steel, Mild Steel - Material Thickness 24 ga. to 3/8 In., Portability Handheld Portable, 1 Phase, Aluminum - Material Thickness 18 ga. to 3/8 In., Stainless Steel - Material Thickness 20 ga. to 1/4 In., Rated Output 150A @ 21VDC, Duty Cycle 40 Percent, 60 Hz, 17 Input Amps, Output Range 30 to 230A DC, Wire Size 0.023 In. to 0.035 In., Flux 0.030 In. to 0.045 In. '

• Price For: Each Series: Millermatic 211 Aluminum - Material Thickness: 18 ga. to 3/8" Mild Steel - Material Thickness: 24 ga. to 3/8" Stainless Steel - Material Thickness: 20 ga. to 1/4" Hz: 60 Input Amps: 17
• Includes: 10 ft. M-10 MIG Gun, 10 ft. Work Cable with Clamp, Built-In Gas Solenoid Valve, Dual Gauge Regulator with Gas Hose, Sample Spool of 0.030 in. Solid Wire, 0.030 in. Contact Tips, Hook-and-Loop Cord Wraps, Material Thickness Gauge Overall Width: 20-1/2" Standards: CSA Certified Overall Height: 12-1/2"
• Features: Advanced Auto-SetTM, Auto Spoolgun Detect, Smooth-StartTM, Angled Cast-Aluminum Drive System, Quick SelectTM Drive Roll, Thermal Overload Protection, Fan-on-Demand Phase: 1 Input Voltage: 240VAC Welded Material: Aluminum, Steel Output Range: 30 to 230A DC Welding Processes: MIG/Flux Core Portability: Handheld Portable Application: Maintenance, Repair, Auto/Cycle Shops, Farm and Ranch Jobs, Hobby Welding

User questions & answers

Question:	Can this machine run 0.35 wire
Answer:	Yes! The machine will run 024, 030, and 035 wire. In addition, iris capable of all three sizes on one feed roller ... just depends on how you have the drive roller set. Check out millerwelds.com for videos! This machine is amazing and we have made so much money with them. We own two
Question:	Will this machine hold a 10 lb spool of wire
Answer:	Sure. Actually a 8" spool the weights of the spools can vary.
Question:	Where is this welder made
Answer:	All the components are made in china ,while the case may be made here and the final assembly is in the US ,
Question:	What size generater is needed to power this Miller
Answer:	According to the Miller 2018 catalog, if the Miller 211 (dual voltage 120vac/220vac) and is plugged into 120 Volts AC, input current draw is up to 24.3 amps ,if the unit is plugged into 220 volts AC, the input current requirement is up to 16.6 amps, assuming these current requirements are at maximum welding setting, turning the welder to lower settings will certainly reduce the input current requirements. Amazon sells a 7000 watt generator with four 120V 20A three-prong outlets, a twist-lock 120/240V 30A outlet. This should be sufficient to run the welder if you plug it into the generator's 220V outlet.

Product description

Easy-to-use and versatile MIG, Stick and TIG welder that helps build skills. Color screen featuring Auto-Set Elite. This all-in-one welder connects to 120 or 240 volt input power. Welds up to 3/8” mild steel. Includes TIG Kit.

• Multiprocess Capabilities
• Color LCD with Auto-Set Elite
• Auto Spool Gun Detect
• Two Gas Connections
• Multi-voltage Plug 120/240V

User questions & answers

Question:	generator friendly
Answer:	Yes I have run this welder off a generator
Question:	What does it take to run this machine
Answer:	Electrical or accessories? Runs off 120v or 240v solid or flux core
Question:	Hi , it’s possible to send this machine to Spain
Answer:	60lbs yes it can be shipped
Question:	Can you tig weld the new ford aluminum with this machine
Answer:	yes you have to have the spool gun for the miller matic 215 !

Product description

This portable, air-cooled spot welder makes quick, strong spot welds in a wide range of materials including steel and cast iron. Welds uncoated mild, galvanized or stainless sheet steel. The spot welder has 6 in. tongs lock firmly onto materials.

Features:

• Single Phase Design - Easily weld together different types of materials with the single phase design. Simple welding mechanism allows you to quickly insert the materials and press to weld
• Portable Design Machine - The attached handle allows you to quickly transport your spot welder to different job locations quickly
• Durable Welding Tips - Welding tips are constructed from high quality steel to get the perfect weld for materials that have a thickness
• Replacement Tips - Spot welder comes with extra pair of welding tips for multiple uses. Simply twist the tips off when they are ready to be replaced and screw on the new one
• Simple Lever Function - To perform welding applications, simply apply pressure and press down on the lever

Specifications:

• Type: Spot Welder
• Voltage: 240
• Outlet Voltage: 2.5 kVA @ 50% Duty Cycle
• Amp: 16
• Throat Depth: 6"
• Weldable Materials: Uncoated mild, galvanized, or stainless sheet steel
• Mild steel: up to a combined thickness of 1/8" sheet steel
• Overall Dimension: 18-1/2"(L) x 4-1/2"(W) x 7-1/2"(H)

Package Content:

• Spot Welder

• Single Phase Design - Easily weld together different types of materials with the single phase design. Simple welding mechanism allows you to quickly insert the materials and press to weld
• Durable Welding Tips - Welding tips are constructed from high quality steel to get the perfect weld for materials that have a thickness
• Replacement Tips - Spot welder comes with extra pair of welding tips for multiple uses. Simply twist the tips off when they are ready to be replaced and screw on the new one
• Simple Lever Function - To perform welding applications, simply apply pressure and press down on the lever
• Portable Design Machine - The attached handle allows you to quickly transport your spot welder to different job locations quickly

User questions & answers

Question:	can i use this to weld iron
Answer:	I would say the short answer is no. This spot welder is for mild steel/sheet metal etc. with a maximum thickness of approx 1/8"- 3/16"
Question:	Saludos... cual podria ser la capacidad del generador electrico para utilizar esta herramienta sin problemas
Answer:	Duty cycle is not a problem.
Question:	can you buy longer tongs to increase depth
Answer:	Absolutely yes. The rings are removable and can be changed out for other tongs. When using longer tongs, pay close attention to the alignment of the tips to get a quality spot weld.
Question:	Can this machine be used with 110v or 220v only
Answer:	They offer both a 110 and a 220 v make sure when u purchase order correct voltage.. Keep in mind a 220 v works much better and will work harder than a 110v . It's definitely worth putting a 220v line in ur garage rather than trying to just barely get by on 110v unit
Question:	What is included in this kit? Any additional accessories needed prior to using it
Answer:	extra welding tips that match the OD of the wire you use
Question:	Come with gauges for gas
Answer:	Yes, has guages for Argon/CO2 gas
Question:	Where is the welder made
Answer:	I would imagine it’s sourced from components all over the world. I’ve owned Everlast tig welder and I ended up buying Miller 215 because I wanted stick welding. It is very good mig and burns 7108 3/32 beautifully
Question:	Does this work with 230V/50Hz
Answer:	This machine will work with 230V/50Hz power.

• MULTI FUNCTION MIG WELDER 200A with MIG/ARC/LIFT TIG gas gasless multi Function 220V DC inverter welder
• GAS&GASLESS AVAILABLE 1kg/ 5kg 0.8-1.0mm solid wire with gas welding iron; 0.8-1.0mm flux-cored wire without gas welding carbon steel and stainless steel
• GREAT DESIGN Simple design, beautiful, small size, light weight, easy to carry.
• ACCESSARIES INCLUDING MB15 MIG gun, earth clamp, electrode holer, gas tube, 1kg 1.0/0.8mm flux-cored wire and portable plug, ready to use!
• 1 YEAR WARRANTY - HITBOX MIG200 welder offers good warranty. If you meet any problem when using this machine, please feel freely to contact us at the first time. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence

User questions & answers

Question:	Were is the gas hook up? Its says its gas/gasless mig but i see no connection internally or external
Answer:	Hi, yes this unit can handle up to 240 volts. Thank you.
Question:	This has a 50 amp 220v plug. Will this run off a 220v 30amp breaker, or a 8500 starting watts 5500 continuous generator
Answer:	Hi, yes this unit can handle up to 240 volts. Thank you.
Question:	What is the requirement of the inlet gas pressure
Answer:	Hi, this unit can handle 18 gauge (0.039") to 3/16" (0.24") mild steel only. Thank you.
Question:	can it tig aluminum
Answer:	Hi, it is not gasoline operated welding machine. You have to plug it into your wall outlet. Thank you.

Product features

Synergy Control MIG200 Multi Functional DC Gas No Gas Self-Shielded MIG Welder

- For stainless steel and iron welding,Gas & No Gas Self-Shielded welding machine.

- Solid wire/flux cored wire is selectable when doing mig welding.

- Capable for 5kg-5kg roll of welding wire,100% duty cycle can be reached when using 0.8mm wire.

- Functional machine with MIG,TIG,ARC function,maximum welding rod diameter up to 4.0mm.

- This machine can be used with power generator,also with easy operation for beginners.

- Contents all the nessecerry accessories,ready to be used.

Gas MIG

Use gas and solid wire 0.8/1.0mm 1kg or 5kg

Gasless MIG

Use flux cored wire, without gas

Lift TIG

Only lift tig function, when use this function, you need to insert argon gas. And the wp-17V torch is not included in this listing, if you need it, please kindly order it separately.

ARC/Stick/MMA

ARC function

HITBOX MIG200 newly updated welding machine

Specifications:

Brand name: HITBOX / Model: MIG200A

Inverter technology: IGBT

Input voltage: AV220±15%V / Frequency:50/60HZ

Max OCV:60V / Duty Cycle: 30%@200A

Power factor:0.73 / Postflow time:1.0±0.5

Packing dimension: 425*183*290mm / Wire diameter:0.8/1.0mm

Applicable thickness: Over 0.8mm / Wire feed speed:3-18m/min

• 【HEAVY DUTY WELDER EXTENSION CORD】: Rated at 40 amp 250 volt 10,000 watts 40ft welding machine cord with 50 Amp nema 6-50 plug and receptacle, features excellent abrasion, oil and moisture resistance and flexibility. For plasma cutter or mig tig welding machine.
• 【SAFETY ASSURANCE】: The 50 Amp receptacle end lights up when it is turned on, which gives a visibly clear indication when it is working and cord is ready to use, for you provide optimum performance and added safety. Besides, With ETL approved which means safty and quality assurance, comes with BougeRV high quality 18 months guarantee.
• 【HIGHT QUALITY MATERIAL】: Featuring 8 AWG and 3C all-copper wires, you can rely on this extension cord for heavy-duty welding tasks. It should last for a long time even with rugged use.STW jacket for superior performance and flexibility, Insulation that is resistant to both abrasions and chemical exposure. Lighted receptacle end indicates when power is on, molded ends offer safety and convenience on the jobsite.
• 【EXTEND WOKING RANGE】: The 40 feet heavy duty welder machine cord provides length enough, allows you to move your welder around the shop and close to your welding work piece for added convenience.performance and flexibility, Insulation that is resistant to both abrasions and chemical exposure.
• 【GREAT COMPATIBLE】:It is compatible with a variety of brands of welders including the MIG series from Lincoln, the Millermatic Welders from Miller, the Hobart Handler, the welders from Century and many other brands.Whether you are an occasional welder or a professional one, this will surely serve you well

User questions & answers

Question:	Is the shipping weight correct, 17.34 pounds
Answer:	Yes, it's about this weight. As you know this cord is a 40ft 8 gauge extension cord, it really big and heavy-duty, for which it can bear the high load with no problem.
Question:	would this be safe to use with a electric toro snow shovel? i can't find an extension cord with a round plug
Answer:	The premise is that you need to know the power or wattage of your snow shovel and its type of plug, and then the type of the extension cord plug and socket should also adapt to the type of plug of the snow shovel, otherwise it will lead to circuit overload and danger
Question:	can use it with my lincoln power mig 210 MP
Answer:	I'm using this for my MillerMatic 215. If your plug ends are the same and your Lincoln is wired for 240, I would assume so.
Question:	Can you run this on a 200 amp welder
Answer:	Yes, just like what the other kind amazon customer said, 200 amp welder is the output and this cord is an extension cord for your input. So if you the power cord plug of your welder fits this cord's outlet nema 6-50 receptacle, it will be fine.

Product features

The BougeRV Welding Extension Cord is what you need when you have to take your welder to the project.

• The 40ft, 8 AWG, 3 conductor ETL listed cord has an industry standard NEMA 6-50 Plug and Receptacle, which are what you need for 40 amp circuits.
• A heavy duty extension cord strong enough to use for welding and long enough to actually be useful.
• The cord has heavy insulation to protect the wiring from chemicals and it is abrasion resistant, so when you drag it around the shop over concrete and through mystery puddles, you know you’re still safe.

NEMA 6-50R

8AWG

NEMA 6-50P

Product description

Specifications:

Type:Flux cored MIG welder(Gasless)

Product Size:340x180x280mm/13.38x7.08x11"

Net Weight:15kg/33lbs

Welding wire roll:Max.1kg/2.2lbs

Input Voltage:AC110V

Frequency:50/60Hz

Max.Input Power:3.6KVA

Output current:50-120A

Duty cycle:105@15%

No Load Voltage:37V

Welding Wire Diameter:0.6/0.8/0.9mm (0.024"/0.03"/0.035")

Insulation Class:H

Protection class:IP21S

Circuit Breaker:30A



Features:

-Flux cored wire feeding MIG welder machine(no gas),ideal for welding mild steel,iron and other metal,suit for 0.024" to 0.035" flux core wire(0.6mm-0.9mm)

-AC110V,50/60Hz,Single-phase,Adjustable power setting,Output welding current:50-120amp,AC mains plug with fuse,Welding wire diameter:0.6-0.9mm

-Adjustable wire feeding control and output current setting,with torch safety control and thermal safety protection

-Portable design,easy to carry.Perfect for commercial and household welding works

-Professional package include all accessories needed and user manual



Notifications:

-Read and according to the user manual carefully before installing and operating the machine

-Always wear protective glasses or take self-protection measurements while operating,do not let others close to the machine while working



Package include:

-1x MIG130 welding machine(with AC plug,2.5m welding torch cable,earth clamp)

-1x Welding wire coil (flux core)

-1x Face mask

-1x Wire brush

-2x Replacement contact tips

-1x User manual

• 【Gasless MIG Welder】--- MIG 130 welder is a professional welding machine for commercial or household use that is compact,lightweight and powerful.Made of heavy duty stainless steel body and covered with durable black paints,with high rust resistance and durability.Easy to operate even for beginners
• 【Convenient Flux-Cored Wire Feed】--- Fit for 0.6-0.9mm(0.024-0.035") flux cored wire,self release metal-inert gas while welding, prevent oxidation of the welded part
• 【Adjustable Feed & Current Control】--- Wire feeding speed can be adjusted from 0-10 levels by turning the rotary knob; 4 levels of current flow setting from 50-120A by adjusting 4 buttons for MIN/MAX,1/2,easy to tackle thin steel,aluminum sheet metal and some other material; Torch with full ON/OFF safety control; Automatic thermal safety protection
• 【Portable & Wide Application】--- Ergonomic handle design,easy to carry everywhere.It is easy to start arc and perfect for welding metal,bicycles,doors,windows and other gardening tools maintenance.A good choice for home DIY and commercial repairing work
• 【Complete Package】--- 1x MIG130 welding machine(with AC plug,2.5m welding torch cable,earth clamp); 1x Welding wire coil (flux core); 1x Face mask; 1x Wire brush; 2x Replacement contact tips; 1x User manual

User questions & answers

Question:	Does this have low enough power to weld 22 gauge steel
Answer:	Yes
Question:	What is the warranty on this product
Answer:	We provide 1 year warranty, 30 days free return and refund for our products from the date of purchase.
Question:	what is the biggest metal it will weld
Answer:	3 /16

Product description

POWER MIG 210 MP MULTI-PROCESS WELDER

• Dual Voltage Inputs (120V or 230V) means you can plug into any common power supply
• Lightweight and portable–just 40 lbs.
• Intuitive push-and-turn digital controls make setup a breeze
• Large color display guides you through the setup process
• Advanced options and settings are simple to access

User questions & answers

Question:	La máquina hace la mezcla del arcón acorde a lo q le programas en el visor
Answer:	The gun comes with full instructions and the toggle switch. I can only say to make sure your machine is a the right model.
Question:	Does this still qualify for Lincoln’s rebate
Answer:	I do not believe so. I have it hooked up to my Lincoln 210 and it works great
Question:	I lost my power cord, where can i replace it
Answer:	yes a 140 is the minimum amps for this aluminum spool gun, don't forget the electric gas solenoid inside your machine for your gas to turn on when welding, some don't have this and you must turn tank on and off. the 140c models are ready to go out of the box. this gun was made for c models but can accommodate other quick connect lincolns. if you do not have a quick connect system that matches this quick connect unit i would not recommend trying to wire in with out a lincoln specialist. hope this helps B.G.
Question:	Where is this machine manufactured
Answer:	No ! This is a Lincoln Electric spool gun made for their 140 / 180 amp wire feed welders !

Product description

Works the first time. Every time. From the brand you know comes the most dependable, portable, powerful stick welder – even if you don’t use it every day. Easy, Quick, and reliable arc starts with hot start technology. DC output means fewer arc outages, less sticking, less spatter and best arc control. DC is the preferred output for the stick welding process. Nearly 100 pounds lighter compared to leading competitive machine so you can work smarter not harder by bringing the welder to the work. It's portable so it’s easier to carry and store. Features infinite amperage control for precise and accurate amperage control and heat output, adjust output by as little as one-amp increments. Weld up to 5/32 inch mild steel. Provides up to 160 amps. Features 120V/240V input power. Allows connection to 120 or 240V receptacles without tools with MVP adapters. Comes with 10 ft. (3 m) electrode cable with heavy- duty holder, 10 ft. (3 m) work cable with clamp, 6.5 ft. (2 m) power cord with MVP adapters for 120V and 240V. Ideal stick welder for DIY, farm/ranch, metal art, maintenance/repair. Covered by Hobart 5/3/1 warranty.

• Dependable, reliable and rugged
• Easy to carry & store. Weighs under 20 lbs; 10 ft. (3 m) electrode cable with heavy- duty holder; 10 ft. (3 m) work cable with clamp ; 6.5 ft. (2 m) power cord with MVP adapters for 120V and 240V .
• Easy, quick, reliable starts with hot start technology
• Up to 160A output. Welds up to 5/32 inch mild steel
• 120V/240V input power. Allows connection to 120 or 240V receptacles without tools

User questions & answers

Question:	My capacitor for this machine blow, where can i get one? My 160i is just two months old
Answer:	This unit will put out 200 Amps @ 220v. Basically about the same power output of a Lincoln Buzz Box which will do 225. For most applications, even fairly heavy metal...that's more than enough power.
Question:	what size generator needed for this welder
Answer:	Absolutely mine has been running on a 30 amp breaker, welded sch 80 5" pipes burning 1/8" 7014 and 6011 rods between 100 and 150 amps with no issue whatsoever
Question:	Is this welder made in the USA
Answer:	It is smart fan system. it will run over 105f.
Question:	AC &DC
Answer:	This machine has a 3 prong 220v power cord attached and comes with an adapter to plug it into a standard 110v outlet.

Product features

Super Smooth and Easy to Use

The Hobart 500570 Stickmate 160i is dependable, portable and a powerful stick welder. Easy to use, quick and with a reliable arc that starts with hot start technology, this tool is lightweight when compared to other leading competitive machines.

Features that Impress

The Hobart 500570 Stickmate 160icomes with a 0 ft. (3 m) electrode cable with heavy- duty holder; 10 ft. (3 m) work cable with clamp ; 6.5 ft. (2 m) power cord with MVP adapters for 120V and 240V.

The Ideal Welder

This tool is made from stainless steel and has an amperage range of 20-160 amps. With a 30% duty cycle, the Hobart 500570 Stickmate 160i allows connection to 120 or 240V receptacles without additional tools.