13 best weller rework stations

Product description

Get it soldered. Weller introduces a new soldering station designed for vocational and professional uses. The we station is ready when you adjust switch it on and start soldering.

• This unit is 40% more powerful than the two models it is replacing to help get your soldering job done faster
• Easy to handle high performance 70W soldering iron with a heat-resistant silicon Cable for safe handling
• Temperature stability (+/- 4⁰f, 2⁰c) and temperature lock protects tips and components, affording a consistently high quality process with repeatable soldering results
• This unit is loaded with cutting edge features sun as intuitive navigation, a Standby mode and auto setback conserves energy and password-protection to Preserve settings
• Includes: one We1 station 120V, one Wep70 tip retainer, one Wep70 iron, PH70 safety rest with sponge, and Eta tip 0.062”/1.6 millimeter screwdriver

User questions & answers

Question:	Can i solder lead seems laps
Answer:	Hakko headquarters are in Japan. http://www.hakko.com/english/company/profile/outline.html . But who knows where an individual product might be manufactured.
Question:	Does this model have a fuse of on the primary side of the transformer
Answer:	There are a number of authorized Hakko distributors. Look on the Hakko USA web site, make sure the one you select on Amazon is listed on there as a true Hakko distributor.
Question:	Does this station worksbfrom 220 V supply
Answer:	Why would you spend $100 to light a bong when you can buy a nice $20 butane torch or a $5 soldering iron if that's what you want to use. This soldering iron would be capable of heating to around 300C. That's more than enough heat to ignite a plant based material. Is it the best? Probably not. Is it safe to use a soldering iron to ignite plant based material? I don't know im not a doctor. The problem is that if you want to keep a tip that heats well then you need to keep solder on the tip or it will burn out and not transfer heat. TLDR: use a butane torch.
Question:	Does this unit have a fuse in it
Answer:	Accoding to the HakkoUSA website (under "where to buy"), ness electronics is listed as a retailer. Can't say if it's real or not, but that gives it a higher vote of confidence.Quick followup edit, I just took mine apart and confirmed it's real. Real stations use the R5F1007C chip. Fakes are known to use AVRs or PICs. Mine was purchased from ness electronics.

Product features

Gets your soldering job done faster

Digital 70W soldering station, 40% more powerful than the well-known WES/WESD stations. This allows the iron to heat up faster and provides a faster recovery time-- gets the job done quicker with more efficiency and precision.

Easy to handle performance iron

High performance 70W soldering iron with an ergonomic handle and easy toolless tip change solution.

Light weight pencil style with a co-molded grip.

New and improved safety rest has additional support so the iron is stored securely in place between uses.

Intuitive navigation

State-of-the-art housing with front panel power switch for easy access.

Easy-to-read LCD screen with 3 push buttons providing easy temperature control, a front switch for easy on/off, and intuitive navigation through all new SW features.

Easy tip change and low total cost of ownership

Change hot tips out by hand by twisting the plastic knurled nut on the soldering pencil without an additional tool.

The soldering set and the genuine Weller ET series tips provide the best performance and have an extraordinary lifetime.

Choose from a wide selection of existing high quality, affordable, genuine Weller ET Tips. Here's where the station starts to pay for itself.

WE Soldering Station

The WE1010NA includes: one digital soldering power unit (WE1), one soldering iron (WEP70), one safety rest (PH70), and one ET soldering tip.

The digital soldering power unit and soldering iron are ESD safe and have received a certificate of compliance for electrical safety (UL and CE).

The WE1010NA is recommended for easy professional soldering jobs, PCBs, electronic kits, education, radio-controlled devices, indoor lightening, low-voltage wiring, and cable assembling.

Acceptable applications are hobby models, small appliances, small engines, repairs, crafts, audio systems, and electrical.

Product description

One compact easy-operating station with a smart temperature profile mode adjustable for diverse re-work applications and assuring fast and safe performance.

• Multi-functional display: unique LC display with a detailed overview of all functions. Adjustable background illumination. Power bar graph allows visual monitoring of the easily readable output power from the station to the soldering iron tip
• Stackable Units: The WT1/WT1H soldering stations can be stacked on the hot air station to save space on the workbench
• High power: 900 W with up to 100 I/ min expanded hot air
• Finger switch: activation finger switch located on the ergonomic hand grip
• New menu button: provides the ultimate user friendly access to and navigation of the menu structure
• 5 pre-sets/temperature profile: up to 5 pre-sets are available to define volume, temperature and time settings. With the profile mode activated, the pre-sets can be run in a selected sequential order
• New Control System: Tandem control with dual sensor system for twice the performance
• Flexiable Hose: 90 cm long, flexiable, heat-resistant silicone hose

User questions & answers

Question:	Is there support for 220v input
Answer:	No.
Question:	Which is better? this or the hakko fr 810 looking to purchase either of the two. haven't seen videos in english on youtube reviewing this product
Answer:	I bought this in December and nozzle dropped and cracked. I am doing micro repairs for 10 years and I am not pleased with this Product. Weller soldering iron works great but it has too many different settings we can live without. All we need is heat setting and and air control. I won’t buy or recommend this to anyone. Hakko I never used so not sure how it works. Hope this helps.
Question:	Which Weller nozzles are included
Answer:	Just one small one to use to do micro soldering on cellphones but air flow seems to strong even on 20%. Don’t like it.
Question:	Is there an option for a 220v version
Answer:	They do offer but I bought 110v.

Product features

High Power

900 Watts with up to 100 I/ min expanded hot air.

Multi-functional LC Display

Unique LC display with a detailed overview of all functions. Adjustable background illumination. Power bar graph allows a visual monitoring of the easily-readable output power from the station to the soldering iron tip.

New Menu Button

Provides the ultimate user friendly access to and navigation of the menu structure.

Stackable Units

THE WT1/ WT1H soldering stations can be stacked on the WTHA1 hot air station or on each other to save space on the workbench.

WTHA1

One compact easy to operate station with a smart temperature profile mode adjustable for diverse rework application to assure fast and safe performance.

Product description

Weller WX2021 Dual Rework Station with 40W Soldering Pencil & Micro Tweezers Includes power unit one 40W soldering iron (Model WXMP) RT3 solder tip and one WXMT micro tweezer (Model WXMT) set of RTW2 tweezer tips and safety rests with dry cleaner for both handpieces. WX2021

• Please read descriptions carefully before ordering.
• Please do not hesitate to contact the seller if you need additional details of this product.

Product description

Weller transforms hand soldering The art of hand soldering has been around for a very, very long time, thousands of years in fact. But it was only until 1941 that a transformer based instant heating soldering method was developed by an impatient American radio repairman who was tired of sitting around waiting for his soldering gun to heat up. Carl E. Weller had to wait until after WWII ended in 1945 to get his Weller Manufacturing Company going. In 1960, the Weller Manufacturing Co. in the US patented the “Magnastat” soldering iron which used a magnetic component to regulate the temperature at the iron’s tip. In an expansion overseas beginning in 1959, the Weller ElektroWerkzeuge GmbH plant in Besigheim, Germany, along with new plants in other countries, was organized to manufacture temperature controlled irons and soldering guns for primarily industrial mar­kets throughout Europe and the Near East. Keeping pace with the increasing complexity of our customers’ needs, Weller Ger­many be­came the market leader for developing and manufacturing hand soldering products worldwide. Our products were proudly emblazoned with “Made in Germany”, signifying innovation and reliability.

From the Manufacturer

The Weller WMRP is a 40 Watt, 12 Volt micro soldering pencil that features blazingly fast heat up, and an ultra precise tip that is perfect for soldering on extremely close-packed boards. All component parts of the system, such as the sensor and heating element, are designed for optimum heat transfer. The pencils heating element is built into the soldering tip. This pencil is aluminum chrome plated and weighs just 75g. The tip-to-grip is 45mm so you're close to the work. Pencil tips have integral cool comfort grips for "no-tool" tip change. Temperature range is 150 Degree F to 850 Degree F. RT series soldering tip sold separately. Compatible with WD1M, WD2M, and WR3M Weller soldering and rework stations. Made in Germany

• Extremely short heat-up time; Maximum wattage of 55W
• Changing soldering tips is quick and easy and requires no tools
• Chrome plated aluminum pencil weights just 75g
• Just 45mm tip-to-grip, so you're close to the work
• Tip has integral comfort grips for "no-tool" tip change (Tips Sold Separately)

User questions & answers

Question:	Can I use this with a WD1 station
Answer:	You need one of the stations with a high-speed controller for use with micro-tools such as the WMRP. These stations are identified by a letter "M" at the end of the model number, i.e. WD1M. The WD1 (without the "M") only works with standard tools unfortunately.

Product description

WELLER WR2000VX REWORK STATION, 300W, 120V

• Price For: Each

Product description

The Weller WXD2 Soldering and Desoldering Station is a dual port power unit, ideal for use with the Weller WXDP120 Desoldering Iron. The Key settings are stored directly on the hand tools, which enables the WX series of tools to be interchanged with ease with other WX series control units without the need to enter control data into the power unit, saving time-consuming set up. With it's venturi, the Weller WXD2 provides high-pressure compressed air, which provides a contact high vacuum...The maximum power output of the 255W of the Weller WXD2 control unit goes up to 200W, allowing the use of all of the WX series of tools. The Weller WXD2 can provide 200W from a single output or two 120W if both ports are in use. The Weller WXD2's Connection cable can connect the control unit to external devices such as hot plates and fumes extraction units...The Weller WXD-2 features a straightforward an multi-lingual menu navigation system, that keeps the need to familiarize yourself to the Weller WXD2 at a minimum. The turn-and-click wheel allows intuitive operation as well.

• Compatible with WXMT desoldering tweezers
• 240 watt dual port station
• Power consumption: 255 W.
• ESD safe to protect sensitive components

Product description

The Weller WMRT is a 80w/24v micro desoldering tweezer with RTW2 tip set. These desoldering tweezers enable precise desoldering of very small SMD components down to 0201. Tips are parallel in the tip cartridge so they are always in alignment. Desoldering tweezers have an extremely short heat-up time and provide optimum heat transfer capabilities. The WMRT is ESD safe to protect sensitive components, and is perfect for lead free applications. Compatible with WD1M and WD2M Weller digital soldering stations. Made in Germany

• Extremely short heat-up time
• Desoldering tweezers features a twin parallel design so tips are always in alignment
• Desolders very small components down to 0201
• Perfect for lead free applications
• Made in Germany

Product description

Weller WX2020 Dual Rework Station with Two 120W Soldering Irons Includes power unit two 120W soldering irons (Model WXP) two XTB tips and two WDH10 safety rests with WDC2 dry cleaner. WX2020

• Please read descriptions carefully before ordering.
• Please do not hesitate to contact the seller if you need additional details of this product.

Product description

Digital Rework Station w/WSP80 Soldering Pencil and DXV80 Desoldering Pencil

• 2 independent tool channels with automatic tool recognition.
• Simultaneous use of 2 tools (maximum of 300 watts).
• Will operate most Weller accessories up to 200 watts. Self contained vacuum and air turbine.
• ECO button for "Sleep Mode". Programmable temperature memory key.
• ESD safe. Weller Micro-Tools, WMRP & WMRT are not compatible.

Product description

The Weller WHA900 is a 650w/120v self contained hot air rework station for reworking SMT components. The WHA900 has a sensor located at the nozzle that continuously samples the temperature and instantly adjusts the heat output to maintain the temperature you've pre-selected - so you don't have to readjust the temperature every time you change the airflow rate. Set it once and forget it - so your rework production increases and your reject rate goes down. Temperature and air flow set-back can be pre-selected by the user. Air from internal pump is infinitely adjustable from 5 L/min. to 50 L/min.. Hot air temperature is infinitely adjustable from 100 Degree F to 1,000 Degree F. Compact design maximizes workspace efficiency. Standby button allows you to power down to low settings when not in use. ESD safe. Nozzle not included. Made in Germany.

• For reworking SMT components
• Compact design maximizes workspace efficiency
• Controlled output maintains set temperature regardless of air flow setting
• Temperature and air flow are controlled independently
• Includes a rest support for the hand piece

User questions & answers

Question:	Hi there, do you ship to Singapore
Answer:	Hello,No we do not ship to SingaporeThank you,Techni-tool
Question:	Does it came with multiple nozzles
Answer:	It does not come with any nozzles. They are sold separately. The unit is rock solid though. Well worth every penny.

Product description

From the Manufacturer

The Weller WR3000M digital self-contained 3 function rework station with tools is a versatile repair station that's specifically tailored to the needs and requirements of professional repairs, to the latest technology electronic sub-assemblies in industrial productions engineering, and in the repair and laboratory fields. The rework station includes the WR3M soldering station, HAP200 (200 watt) hot air pencil, WP80 (80 watt) soldering iron, and the DXV80 (80 watt) desoldering iron. The WR3M's power supply is 120 volts and power consumption is 400 watts. Temperature ranges from 150 Degree F to 999 Degree F. The hot air pump has an on/off duty cycle of 30 seconds with a hot air maximum capacity of 15 l/min. The vacuum pick up pump has an on/off duty cycle of 60 seconds on and 30 seconds off. The WR3M's automatic tool detection guarantees the simultaneous operation of all 3 soldering tools. Made in Germany.

• 400 watts of power over 3 independently controlled channels
• Air and vacuum ports allow the use of up to 3 tools simultaneously
• Compatible with high speed micro tools WMRP and WMRT
• USB port allows the use of included PC software for data logging
• Large intuitive LCD display shows critical functions for 3 channels

• Zilog Dual Core Microcomputer Processor - This unit now features a Three LED tubes display and you can easily change the LCD digital readouts back and forth "Centigrade to Fahrenheit" for the soldering iron and hot air temperatures with the push of a button.
• PID Temperature Control Technology - This unit features Temperature Control Technology which the program will cycle every 20 milliseconds to detect the actual temperature of the soldering iron's heating element, quickly correct it with a rapid return to the correct set temperature.
• Exclusive Air Gun Manual/Automatic Mode - The air gun automatic function is a safety measure which ensures the heat is automatically cut off when the air gun is in its holder.
• Air Flow Adjustable and Readable - Dual blue LED digital displays to show precision temperature for hot air gun & soldering iron and one blue digital display to show air flow (20 - 80).
• 1 Year Warranty (USA Exclusive) & User-friendly Design Features - Celsius/Fahrenheit Programmable, Temperature Correction Feature: -50 °C to +50 °C, Soldering Iron Sleep Function, Hot Air Gun Manual /Automatic Function, Hot Air Gun Fail-Safe Protection.

Product features

The 862BD+ 2-in-1 Rework + Soldering Station

For the cost of one station, you now get an integration of two professional-grade tools to help you expand your capabilities and the size of your projects. Having both the hot air station and the soldering station at your disposal can dramatically increase the flexibility and versatility of your work.

The station also comes with a series of assistive functions to help you improve work quality, efficiency, and equipment lifespan. These functions include temperature stabilization, hot air protection mode, hot air automatic/manual modes, soldering iron sleep mode, °C/°F conversion function, temperature calibration, and more.

Regardless if you're a professional, an intermediate, a beginner, or an electronic fanatic, this station can help you complete your work with ease.

Numerical Fan Speed Values

The numerically displayed fan speed value (simulated value) can help you keep track of the optimum fan speed setting for components in different sizes. You can use the corresponding fan speed to ensure your work is always precise, and efficiently done.

Automatic Hot Air Mode

An YIHUA Exclusive Technology – When flipped to automatic, the gun cools to 212°F when placed in the holder. Unneccessary wear and tear could happen when you’re switching between tools for a project. This function helps avoid those unnecessary wear on the consumable parts, and extend the lifespan of the heating element by cooling the gun when it is not in use. At the same time, the function improves safety factor, and help you reduce unnecessary energy usage.

Manual Hot Air Mode

An YIHUA Exclusive Technology – When flipped to manual, the gun stays at the set temperature for frequent usage. This provides an alternative option for when you need to use the hot air gun frequently for a project t.

We equipped this function with a quick-access toggle switch, so you can switch the hot air station back to the automatic mode at a flick of a switch after on-and-off usages.

Soldering Station Sleep Mode

In the holder, the iron cools 392°F to idle when it detects no movements. You can set the sleep mode timer from 0 to 99 minutes based on your own preference. Idling at 392°F prevents the oxidization of the soldering iron tip, and it is able to heat up to your set temperature quickly when you pick up the soldering iron.

Precision

• Three Real-Time LED Displays
  • Fan Speed Display: 20-80 (simulated level)
  • Hot Air Station Temperature
  • Soldering Station Temperature
• Temperature Calibration: Yes
• PID Temperature Control: Yes

Safety

• Quality Transformer
• Proprietary Aviation-Grade Power Connectors
• Main Power Switch
• Individual Power Switches
• ESD Safe
• Lead-Free

Essential Tools Included

• 1 x Roll of Lead-Free Solder 0.8mm 50g
• 4 x Hot Air Nozzles (Assorted)
• 5 x Iron Tips (Assorted)
• 1 x Solder Sucker
• 1 x Pair of ESD-Safe Tweezers
• 1 x Iron Holder (with Rosin & Brass Wool Ball)
• 1 x Cleaning Sponge
• 1 x IC Extractor

Professional Repairs

• Cellphone / Laptop Repair
• Radio / Automobile PCB Repair
• Standard Size Circuit Board Repairs
• And more

DIY Projects

• Arduino Projects
• RC Cars / Boats / Airplanes / Drones
• Home Appliances Modification
• And more

Scientific-Practical

• University / High Schools / Scientific Institutes
• Research & Development Labs
• Electronic Assembly Line
• And more

Product description

Digital Soldering Station, Watts 40/80, Temp. (F) 150 Degrees to 850 Degrees , Design WX Series, Features Dual Port Allows 120W Soldering Pencils to Operate Simultaneously, Capacitive Glass Touch Screen, Turn and Click Dial, Multi Language, Large LCD Display, Versatile Connectivity Options, USB Port for Parameter Configuration and Data, Includes Power Unit, Stands, WXMP Pencil and WXMT Tweezers, RT3 and RTW3 Tips, Tip RT Series, For Use With WXMP Pencil and WXMT Tweezers

From the Manufacturer

Solder Stat, WbyMP, WbyMT,WDH50 and 60, 120-Volt.

• Occupational Health & Safety
• Country of Manifacturer: Germany
• Manufacturer: Weller

User questions & answers

Question:	Are these tweezers as good as the jbc tweezers? are they fixed position
Answer:	very pricised
Question:	Do the tweezers and iron come with tips
Answer:	Mine came with tips. As best as I can tell, the RT3 and RTW2 Tips are what came with mine.