14 best wire soldering

Product description

▲ Product Name: Fluxed Rosin Core Solder Wire

▲ Parameters: Tin 63% Lead 37% (Sn63-Pb37)

▲ Flux Content: 1.8%

▲ Melting Point:Soldering Wire 361F/183C,0.8mm(0.0315inches), Gross Weight: 50g(0.11lbs/1.61Ounces)

▲ Soldering Wire Reel Size- 55mm dia x 30mm(2.165in dia x 1.181 in)

▲ Package: 1 pc x 0.8mm 50gram Solder Wire Spool

▲ Special Features: Perfect soldering capability, Lower melting point, Soldering Flows more smoothly, much stronger soldering point,easier to use

▲ Full refund guaranteed within 30days if you are not satisfied with the quality.

• √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
• √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)
• √ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket
• √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
• √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc.

User questions & answers

Question:	Does this work okay for soldering brass
Answer:	It is easy. Start testing the temperature with the as soon as the iron starts warming. If you heat the tip until it is discolored before applying solder it may be difficult.
Question:	How do you solder. Do you put the solder on the iron than run over the wire or it should just melt on the wire without the iron melting the solder
Answer:	I would not use it, the problem is if you leave it plugged in for more than 45 min. The heat transfers to the handle and it starts to melt. They used to make the handle out of wood which would allow the unit to be plugged in for extended use.
Question:	Which size (mm) do I choose for cellphone, TV, or smallhousehold appliances etc
Answer:	Yes
Question:	What kind of soldiers can work for bikes
Answer:	You would use the MT series tips.

Product description

Description:



Solder Wire with Rosin Core. 63% Tin 37% Lead Solder Wire with lowest melting point 183 Degrees Celsius or 361.4 Degrees Fahrenheit among other Tin Lead alloy.





Features:



Less rosin splash, not dirty board.



Good solder fluidity with short wetting time



Welding without evil smell, no toxic smell, less smoke



Solder is bright, no pull point



Strong and reliable, strong anti-mechanical impact





Package content:



1 X Solder wire in plastic storage tube

• Soldering Pen Pocket Solder Core Wire With Rosin Core Reduces Oxidation of the metal with which it is soldered
• Pocket Pack Solder Wire for the ease to store and carry even in your pocket
• Solder Wire Diameter: 0.031 inch (0.8mm)
• Good solderability, insulation resistance, No spattering and Non-corrosive
• Good for DIY works

User questions & answers

Question:	What about storage for this wire
Answer:	yes used to hard solder batteries for high school lab work. USE ELECTRICAL SOLDER ONLY
Question:	How is made for this solder wire
Answer:	I used basic flux paste with this solder and it worked just great.
Question:	is it leads free
Answer:	The length is about 472 inches (12 meters).
Question:	Is it perfect for drone welding
Answer:	Yes . But a better choice would be solid solder and a water soluble liquid rosin. A 50/50 solder would be more ridged. Just my opinion.

• Soldering Iron Support Station: Standard dual spring soldering iron holder with sponge is a very useful tool when the soldering iron work.It has a secure base and it is more safer than any other thin soldering stand.The maximum extent to avoid the user was burned and damaged.
• Soldering Iron Unique Features: Superior professional soldering iron has 5 multiple tips replacement, Heat and impact resistant design of screw thread so the iron head is not easy to drop.Adjustable Temperature from 200℃-450℃.Heat up fast and work great.
• Solder Sucker Desoldering Pump: Rugged metal construction,the desoldering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use, best for removing solder from PCB through hole solder joints.
• Widely Used & Carry Portable: Soldering iron tools widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag.
• 14-In-1 Soldering Kit: Soldering iron kit comes with soldering iron,desoldering pump, 5 multiple soldering tips, tin wire tube, soldering iron stand, tweezers, wire stripper cutter, 2 electronic wire.

User questions & answers

Question:	is the solder lead free and does it have rosin core
Answer:	R tank is max. OD=5.25", h=18", weight=13.26 lbs. - MC tank is max. OD=4", h=15", weight=8 lbs. (All empty tanks).
Question:	Can this be used for jewlery making
Answer:	Isn't everything made in China? Honestly I do not know, attempted boycotting China goods but have given up, "kinda" like the weeds.
Question:	What is the lowest temperature setting
Answer:	10 cubic feet in acetylene
Question:	Who made the product pictures? They are hilarious and even the stock photos are photoshopped
Answer:	El embalaje tambien incluye cilindros de oxígeno y acetileno (se envían vacíos)

• 【HEAT UP QUICKLY & ON/OFF SWITCH】- Quality Guaranteed inner–heated ceramic technology makes the soldering iron gun tip heat up very quickly(2 minutes or so), keep a constant temperature of 430℃. Meanwhile, the top on/off switch can avoid a long time of use, saving energy and ensure safe soldering. The powerful soldering tools can meet your daily work and hobby needs, like electric repair, home DIY and other soldering projects.
• 【SINGLE HAND OPERATION】- Have you ever think about doing solder feeding and soldering by one hand? Order our automatic soldering gun, you can do it. The solder wire scaffold provides the hands-free solder feeding while soldering, with you pressing the trigger, the solder wire trace down the steel wire pipe into heated-up solder head, then melt and flow down to the place where you are repairing. The soldering iron gun kit includes 1mm 1.75oz solder wire roll, no need to purchase separately.
• 【DESOLDERING VACUUM PUMP】 - High-quality ABS body is very durable, covered sponge gives you the easy and comfortable way to hold, nylon pump end endure high temperature for a long time use. The de-solder pump helps you remove excess solder from PCB through-hole solder joints. What a quick and easy solder residue clean up method.
• 【ANTI-STATIC TWEEZERS】- The tweezer is made of high-quality and durable stainless steel, resistant to most acids and other corrosive agents. Plated resistive ESD coating, prevents static damage to electronic components.
• 【30 DAYS BACK MONEY GUARANTEE & 2-YEARS WARRANTY】- 100% costumers satisfaction is our unremitting pursuit. If you have any questions, please feel free to contact our after-sale services, all issue will be resolved timely.

User questions & answers

Question:	is this gun good enouhg for soldering cables on car stereos
Answer:	Works very well, great for small soldering jobs. This was money well spent.
Question:	Can you use other makes of solder wire spindles with this product? My need requires using silver (rosen core) wire
Answer:	Hello, thanks for your quesiton. 0.8 -1.2 mm solder wire is suitable for the automatic soldering gun.
Question:	Can it work with 220V
Answer:	No
Question:	Waht's the power of the soldering iron gun
Answer:	I think the soldering gun is suitable for 0.8 -1.2 mm solder wire. And its attached rosin core solder wire is works well.

Product features

User-friendly Operation

You can use the soldering gun by one hand, improve your soldering efficiency, and it's easy to control the solder feeding. Upgraded inner automatic feed design, constant and smooth operation.

Superior Soldering Iron Tip

The soldering tip is made by lead-free copper, and chrome-plated finished, features fast thermal conductivity and longevity.

Premium Ceramic Heat Element

Features 60 watts high-Power heating core and internal superior heat conductivity for greater efficiency, faster heating and safer usage.

Visible Solder Wire Feeding

High efficient automatic tin wire feed and easy to check inner wire feed structure, make the automatic soldering gun perform well.

Desoldering pump

High-quality ABS body is very durable, covered sponge gives you the easy and comfortable way to hold, nylon pump end endure high temperature for a long time use. The desoldering pump helps you remove excess solder from PCB through-hole solder joints.

Anti-static tweezers

The tweezer is made of high-quality and durable stainless steel, resistant to most acids and other corrosive agents. Plated resistive ESD coating, prevents static damage to electronic components.

Lead-free Solder Wire

The complete soldering kit comes with a solder wire wheel, great for soldering capability, Lower melting point, Soldering Flows more smoothly, much stronger soldering point,easier to use.

Wire Dia.: 1mm/0.39inch wire dia, Gross weight : 1.75oz , Parameter: Tin63%Lead 37%Flux2% ,Low Melting Point: 361F/183C.

Step 1

Install the solder wire roll into the reel.

Step 2

Put the reel on the solder gun bracket.

Step 3

Insert the wire into the inlet.

Step 4

Press the soldering gun trigger until solder wire touch the tip.

Product description

Pattern Name:50g solder



TAMINGTON Solder Wires are soldering materials for engineering, and electronic repairs.



Tin / Lead: 63% / 37%



Flux: 2.2%



Weight: 50g (0.11lb)



Diameter: 0.8mm



Melting point: 178°C - 188°C（356°F - 366°F）



Package Included:1 × Spool Lead Free Solder Wire



Product Warranty:



TAMINGTON Direct Customer Sevice Team is dedicated to offer our valued customers a great and professional services - Timely email reply, Helpful solutions, Refund & Return Warranty.

• Solder wire: solder wire with rosin core; It weighs 50 g/ 0.11 lb.
• Relative parameters: the size of solder wire roll is 5.5 x 5.5 x 2.8 cm/ 2.17 x 2.17 x 1.1 inches.The diameter of the electrical soldering wire is 0.8 mm/ 0.031 inch; Sn/Pb: 63%/ 37%; Flux: 2.2%. The melting point of soldering iron wire is 183 degrees Celsius/ 361 degrees Fahrenheit.
• Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity; With the solder wire reel, soldering can be accomplished quickly.
• Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
• We have a professional team and we are always ready to provide the best service to each of our customers and expect the cooperation are beginning. If you have any question,please don't be hasitate to contact us.

User questions & answers

Question:	Can I use this for connecting silver jewelry with a soldering iron
Answer:	Yes, it will work. It handles very well especially for working with small items.
Question:	Is this considered ra or rma solder
Answer:	I can't say for sure , but I would think it should.
Question:	What is the melting point
Answer:	Yes it will
Question:	is it good for beginners
Answer:	I use it for guitar electronics and it works better than, another roll of solder that doesn't say flux on package. It says "contains flux" and a percentage. So I believe its legit, and haven't used anything else to make it work.

• · Holds Item Securely (Leaving Hands Free) with 2 Alligator Clips on 4-Way Swivels.
• · Heavy duty cast iron base keeps unit upright and provides stability and keeps objects secure while working.
• · Mirror and clamps are mounted on adjustable ball joints to position and view work at any angle. Sometimes when you receive the item, maybe it was disassembled, pls don’t worry, it is inevitable in the transportation, hope you can understand and assemble it by yourself, then it can be used usually. Thanks very much.
• · Perfect for DIY, home, office, hobby, modeling, jewelry making, fine detail work, watches, and users who work with solder or small details.
• · Package Included:1x Helping Soldering Iron with Magnifying Glass;1 x 0.6mm 50gram 60-40 Solder Wire Spool

User questions & answers

Question:	Does it come with solder
Answer:	That I don't know

Product features

Specifications

1. Fine Rosin Core Solder.

2. Mirror and clamps are mounted on adjustable ball joints to position and view work at any angle.

3. With 2 Alligator Clips on 4-Way Swivels.

Wide Application

• Perfect for DIY, home, office, hobby, modeling, jewelry making, fine detail work, watches, and users who work with solder or small details.

• 【Soldering Iron with ON/OFF Switch】- The 110V 60W adjustable temperature soldering iron adopts ceramic-core induction technology, fast heats up, adjustable temperature with large venting holes. can be rapidly heated in 30 seconds, featuring on/off switch makes it energy saving and ensure safe welding. The insulating silica gel cover can effectively protect the iron from overheating or dropping
• 【Upgrated One-handed Use Desoldering Pump】- Rugged metal construction, resistance to beat and corrosion. The disordering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use. High pressure vacuum can remove solder from a printed circuit board effectively
• 【11-in-1 Soldering Iron Kit】- Soldering iron kit comes with soldering iron, solder wire, desoldering pump, stand with cleaning sponge, 5 Multiple soldering tips and a PU carry bag. This tool set can meet all of your soldering project needs
• 【0.8 mm Solder Wire】- The diameter of the electrical soldering wire is 0.8 mm/ 0.031 inch, It weighs 50 g/ 0.11 lb, the total length is about 57m, which can be used for a long time. Easy to be soldered, flows smoothly, soldering fast and strong soldering point
• 【Application】- The soldering iron sets are suitable for DIY, various repaired usage of electronics and circuit board, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories! It suitable for beginner study electronic engineering and electronics hobbyist

• Sn/ Pb: 60% / 40%; Flux: 2.0%; flows well and heats evenly
• Diameter: 1.0 mm (0.039 in); weight of solder wire: 100g (0.22 lb)
• Melting point range: 185°C - 190°C (365°F - 374°F)
• Good solder ability both in electrical conductivity and thermal conductivity
• Easy to use, be widely applied in electrical repairs

User questions & answers

Question:	How does this solder compare to kester solder brand
Answer:	Yes, it can also work for 16 gauge wire. But maybe you have to apply more solder since the solder wire has smaller diameter.

Product description

Specifications: Rated temperature: -60 C - + 200 C

Rated voltage: 600V

Insulation: Silicone rubber

Has excellent high temperature resistance, low temperature performance, with excellent resistance to high pressure, anti- aging, high temperature, acid, long service life.

Instructions for use:

Insulating silicon rubber, color: white, red, black, blue, green, yellow, translucent and so on. Long life easy soft easy to install. Widely used in high-temperature line environment lighting, household appliances, electric appliances, instrumentation, electrical wiring and electronics, lamps, and so on.



* Hook up wire is used in a variety of general-purpose electrical applications.

* Stranded copper wire provides good electrical connectivity while Silicone rubber insulation protects the wire against abrasion, chemicals, oils, and solvents.

* The wire provides excellent uniformity for easy processing, stripping, and terminating.

* Long service life , long life, environment-friendly

* Available in Black, Red, White, Blue, Orange, Purple, Brown, Grey Green & Yellow Color.

*Good ideal for DIY decoration

• Product Name :Silicone Wire; Wire Type :30AWG;
• Material : Silicone rubber , Tinning Copper;
• Voltage Rating: 600 Volts ,Rated temperature: -60 C - + 200 C
• Wire Length :10M / 33Ft each color
• External Color : Black red blue green yellow

User questions & answers

Question:	Is the wire solid or stranded
Answer:	Theoretically it's possible to connect 3 strands, but actually it may result in the last one don't light up, so suggest 2 strands.
Question:	Is red red? I bought 22 awg and red is orange
Answer:	Both strands, when connected, work with one remote.
Question:	what is the outer diameter of the insulation
Answer:	Yes, there are two strands of 48’ in length
Question:	Tinned or bare copper? fine stranding or just about 7 strands
Answer:	The packaging says "Fits Most Ranges". It includes five sets of universal adapter inserts that fit five different configurations. Perhaps you can see from the photo whether any of these adapters would work with your configuration.

Product features

Customer like our wires

1. These wires are pretty great, and wonderful to work with in PC-related rewiring or wire-extension works due to the thickness of the core and the heat resistant nature of the silicone insulation.
2. These are high quality silicon insulated wires. It is important because during soldering they don't burn like PVC insulation. These wires are the best for the soldering prototyping board - flexible, low impedance and not burned insulation. Deal is good too. Don;t confuse this set with one which has PVC insulation. It is important because during soldering they don't burn like PVC insulation.

Red&Orange

Some customer says "Red" Wire is like orange.

Due to the thickness of the core and the heat resistant nature of the silicone insulation so is different from PVC this color difference problem is difficult to control.

We show the two colors ,hope you can understand.

Red Blue Green Yellow Black 5 Colors

The box doubles as a pullout style holder if that appeals to you.

• Complete Soldering Iron Kit with Multimeter – necessary tools that are widely used for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, other do-it-yourself solder applications, crafts/jewelry making and other uses
• Premium Quality Components with safety features – high quality soldering iron, stand, multimeter and all other accessories; soldering iron with heat-resistant cap and grip, digital multimeter with all-around protection and stand function
• Bonus Accessories – 20+ extra items such as pen-shaped screwdriver, desoldering pump/solder sucker, solder, tweezers, wire stripper and cutter, mini screwdrivers, mini PCB, heatshrink tubes and more plus a downloadable ebook
• Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY package
• Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction

Product features

The Plusivo Soldering Kit

• a set that contains a complete soldering kit
• includes common tools used for soldering
• features a Multimeter
• bonus items that are needed in both soldering or desoldering
• contents are inside a PU carry bag that allows you to easily store the tools
• bonus Ebook for download to guide you in your soldering journey

• Solder Wire: Included in the kit is a high quality 60-40 (Sn/Pb) Tin - Lead rosin core solder wire alloy with 0.6mm diameter and 1.6% flux content commonly used for wiring appliances, DIY projects, 3D printers and other electronic projects or electrical and electronics soldering and repairs
• Rosin Paste Flux: This high-quality 50g rosin flux soldering paste facilitates the flow of solder, thus increasing the efficiency of the soldering process and is just right for your small DIY soldering projects.
• BONUS Items: Aside from the solder wire and rosin paste, this kit also includes 2 mini screwdrivers and two 22 AWG Wire tinned copper PVC jacket, a great addition to a very simple and affordable kit for soldering.
• Durable Carton Box: All items are neatly packed inside a durable carton box to keep them organized, secured, and easy to carry and transport anywhere.
• Satisfaction Guarantee: The Solder Wire and Paste Kit is backed by the manufacturer’s 30-day money-back guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction.

User questions & answers

Question:	if i use this on a PCB does this need to be cleaned or is it a no clean flux
Answer:	Well, normally only Active Duty Soldiers from the Army can work for bikes. Your Air Force Airmen and your Navy Sailors tend to do things a little different. Guard and Reserve Soldiers are quite talented also.
Question:	can i use this for jewelry
Answer:	It is good for Tin, copper and silver wire
Question:	Is it solid or stranded wire
Answer:	yes are replacement tips avaibable
Question:	Is this good for 16 gauge wire
Answer:	No. Just rosin core solder.

Product features

Solder Wire Spool

• Diameter: 0.6 mm
• Weight: 50 g
• Alloy: Tin 60% Lead 40%
• Flux: 1.6 %

Rosin Paste

• Weight: 50 g
• perfect soldering joints
• good immersion
• neutral pH
• non corrosive
• stable performance
• low volatility
• non toxic

Bonus Mini Screwdrivers and Connecting Wires

4 bonus items!

• 2 pcs stranded AWG 22 Tinned Copper PVC Wire (Black and Red)
• 2 pcs Mini Screwdrivers for small electronic parts

E-book‌ ‌available‌ for ‌download:‌ ‌Mastering‌ ‌The‌ ‌Art‌ ‌of‌ ‌Soldering‌‌ ‌

• ‌contains‌ ‌all‌ ‌the‌ ‌necessary‌ ‌information‌ ‌on‌ ‌the‌ ‌different‌ ‌tools‌ ‌and‌ ‌materials‌ ‌included‌ ‌in‌ ‌the‌ ‌solder‌ ‌kit.‌ ‌
• features‌ ‌several‌ ‌“How‌ ‌To’s”,‌ ‌“Do’s‌ ‌and‌ ‌Don'ts”,‌ ‌and‌ ‌many‌ ‌other‌ ‌topics‌ ‌on‌ ‌soldering‌ ‌to‌ ‌help‌ ‌beginners‌ ‌and any user with‌ ‌their‌ ‌DIY‌ ‌soldering‌ ‌projects

Product description

Fluxed Rosin Core Solder Wire

Features：

Less rosin splash, not dirty board.

Good solder fluidity with short wetting time

Welding without evil smell, no toxic smell, less smoke

Solder is bright, no pull point

Strong and reliable, strong anti-mechanical impact

Product Name:Fluxed Rosin Core Solder Wire

Parameters:Tin Lead Alloy Sn63 Pb37, Rosin Core, Soldering flow well, easy soldering, melting fast Flux Content: 1.8%

Melting Point:Soldering Wire 361F/183C,0.8mm(0.0314inches), Gross Weight: 100g(0.22lbs/3.52Ounces)

Soldering Wire Reel Size- 55mm dia x 29mm(2.15in dia x 1.141 in)

Package: 1 pc x 0.8mm 100gram Solder Wire Spool

• Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
• Parameters:Tin Lead Alloy Sn63 Pb37, Rosin Core, Soldering flow well, easy soldering, melting fast
• Wire Dia: Solder Wire is 0.8mm(0.031inches), Gross Weight: 100gram/0.22lbs/3.52Ounces
• No cleaning: There is less scum of the soldering iron, bright color of the liquid surface, stable welding and no cleaning.
• Scope of application: household appliances, audio, earphones, mobile phones, electric toys, circuit board maintenance, etc.

Product description

"Pro’sKit is composed of “Pro”+”s”+”kit”, these words combined meaningfully from "Professional’s Tool Kits". For this brand name, Prokit’s aims to be a professional tool kits manufacturer, developing professional tools to make people’s job efficiently and well done. “Innovation, Quality, Service” are Prokit’s company’s policy and permanent insistence of Pro’sKit brand. We work with “innovation” - develop professional tools, “quality” – meet the international safety standard, “service” – focus on user friendly design to provide the total tool solutions to satisfy market demand. Pro’sKit is not only a tool brand; it is your excellent helper and a friend that you can trust."

• Several points of adjustments
• Weighted base to keep unit upright
• Two alligator style clips to hold your components in place
• Professional grade tools

User questions & answers

Question:	Can this be mounted to a desk or table
Answer:	Yes, absolutely. I use it to weld my appliances. It works
Question:	Hows the quality with this one? i bought one from se, the left side was broken right out the box. the right side only lasted about a month
Answer:	The connections should be clean for a good solder joint. A dab of soldering paste on the joint before soldering is needed.
Question:	I want to use this to paint and base miniatures, how sturdy are the arms and clips
Answer:	This product is mainly for electronics.
Question:	Does anyone know the exact thickness of the central bar that each clip is mounted on
Answer:	The wire in this kit is stranded wire.

Product description

50g Sn60 Pb40 Rosin Core Solder Wire

 

WHY CHOOSE US:

• Bright solder joints: Melts evenly and clean, less smoke. The solder joints are bright,reliable and smoothly. and there would no false welding problem occur.
• Lower melting point: The melting point is 190°C, which makes fast welding and does less harm to the soldered components, as well as safer.
• High purity, high insulation resistance & strong anti-oxidation: After it is welded, there will be a protective film of the surface to be anti-oxidant and keep it bright.
• High quality: Made of Sn60-Pb40, soldering can be accomplished faster, saving time and labor.     
• Excellent Customer Service: We offer refund or replacement with the first month if you are not completely satisfied with the product.

 

Specification:

Alloy composition: Sn 60%- Pb 40%

Density: 8.5g/m³

Melting point: 190°C

Operating temperature: 320°C - 360°C

Weight: 50g

Size: 0.6mm/ 0.8mm/ 1.0mm

 

Package:

1 x 0.6mm/0.8mm/ 1.0mm Rosin Core Solder Wire

Best After-Sale Service:

Dviocnd provides 12 Months Service for the product. If you're not completely satisfied with the product, please contact us and you'll be offered a refund or Replacement alternatively within the first 3 months and we will reply you in 24 hours. Absolutely risk -free purchase for you.

• The Rosin Core Solder Wire: Consist of Sn 60%- Pb 40%. The density is 8.5g/m³with the diameter of 0.6mm/0.8mm/1.0mm.
• Lower Melting Point: With the melting point of 190°C, it can be welded fast and deduce thermal shock to soldered components. The operating temperature can be within 320°C - 360°C.
• Multiple applications: The rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, circuit board and other electronics devices.
• High quality: High insulation resistance, high purity and strong anti-oxidation make this rosin core solder wire long lasting and much better than others on the market.
• Free-risky Warranty: We offer a 24-month manufacturer warranty for product. If you have any question about the product, please feel free to contact us via email.

User questions & answers

Question:	Does this thing melt and have a bad smell
Answer:	dont waste your money!!!!
Question:	How do you weld it?Do you put the solder on the wire?Or should you let the solder melt on the wire instead of letting the wire heat up and melt the so
Answer:	I don't use it on brass.
Question:	Can this product be melted with a lighter
Answer:	Solder follows heat, but it's important not to burn off all of the flux before it gets to where it needs to go (flux removes oxidation, which allows the solder to make a strong molecular bond with the surface). Putting solder on the tip of the iron first is a guaranteed way to burn off the flux in the solder before you put it where it needs to go. I typically touch the iron to where I want the solder to go, heat the connection, and then bring the solder in to either touch the same joint. On wires the iron will touch the opposite side as the solder - so the solder flows through toward the heat of the iron. In some applications the connection is too small, so I touch the solder to the iron as close as possible to the connection. If I ever need to apply solder to the iron first and then bring it over to a connection, I use a flux pen or paste flux to coat the connection before soldering it.
Question:	Can this be used for small appliance repair
Answer:	Use 0.4 - 0.6 mm (~ 0.4 preferred) for surface mount (and similar size) stuff, 0.7 - 1 mm for larger "through-hole" components. For vintage appliances (60-80's), the larger sizes are fine, for modern stuff you can generally use the larger sizes for entry-point connectors and power supply components, but much of the pcb will be surface mount requiring the smaller sizes. Search for "soldering" on Youtube.