12 best heat shrink guns

Product description

The HT1000 Heat Gun is a dual temperature heat gun that can help you quickly complete countless DIY projects using high temperature heat outputs. It uses a 750ᵒF and 1000ᵒF temperature setting to easily loosen rusted bolts, remove flooring, and thaw frozen pipes. It is a heat gun for shrink wrap, heat gun to remove paint, and so much more! The gun uses 1200 watts of power to easily complete countless home improvement projects. Its durable and lightweight design applies effective, concentrated heat for various project needs. The gun also features an integrated stand to provide safe, hands-free operation.Hello, The product details on Amazon.com aren't displaying correctly, which will lead to a bad customer experience. Please update this ASIN immediately with this information.

• DUAL TEMPERATURE HEAT GUNS: The HT1000 Heat Gun offers a 750ᵒF and 1000ᵒF temperature setting to easily help complete household home improvement tasks
• HEAT GUN FOR HOUSEHOLD PROJECTS: Use this heat gun to soften paint, caulking, adhesive or putty for removal. Other applications include shrink wrap, bend plastic pipes, and loosen rusted nuts or bolts
• HEAT GUN ADJUSTABLE SETTINGS: The two fan speeds provide additional control to customize to your project needs
• HANDS FREE OPERATION: Features an integrated stand for safe, hands-free operation to help prevent the hot nozzle from touching your work surface
• DURABLE FOR GENERAL USE: Features a corrosion resistant nozzle for long lasting use and integrated hanging hook to easily store on a peg wall or workbench

User questions & answers

Question:	Is this heat gun the same one as the Hero Arts heat gun? Thanks
Answer:	Yes, you need the Iroda PS-95 replacement tip. I sell this on eBay under the company Eddy Products. Just do a search for MJ-950 replacement tip, PS-95 and it should pop up. thanks Kevin
Question:	Hello guys I need to know if it is working V120 or V
Answer:	Hey Ryan, This unit does not have an internal blower wheel, so there are no real CFM’s for the MJ-950, however at the tip it does get to 1400 degrees F on full throttle. You can do a lot of damage at such high temps. And if that’s not hot enough, I don’t know what would be. Just be really careful if you go that route. Hope this helps! Kevin
Question:	removing old paint
Answer:	Not a good idea for several reasons, I'll only pick one: Car door handles contain plastic, as do the locking mechanisms. You would be better served to use a lock deicer rather than a heat gun. This unit gets hot enough to remove the paint from your car, so you'd surely melt the lock and handle into so much useless gunk.
Question:	I seen this has a 3-prong plug. If I get a 2 prong adapter and reverse polarity, can I use it to cool things down
Answer:	No, the CRAFTSMAN and BLACK+DECKER Brands are not interchangeable.
Question:	replacement tips
Answer:	No it doesn’t
Question:	Does it get hot enough for emblems in cars to help them stick
Answer:	Home Depot
Question:	Could this be used to meal frozen car door handles
Answer:	Save your money. It’s junk!!

Product features

Versatile Wagner Heat Gun for Home Use

The Wagner HT1000 heat gun is an easy-to-use hot air tool that applies focused heat for removing paint, thawing pipes, loosening rusted bolts and more.

Two Temperatures Settings

Find the perfect heat setting for your project needs by switching between the two temperature settings. The heat gun offers a low 750°F and high 1000°F setting.

Perfect Design for Extended Use

With a corrosion resistant nozzle and rugged, lightweight handle, the HT1000 is durable enough to power through tough jobs and big projects. We’re confident in our product’s performance, which is why this durable heat gun is backed by a 2 year warranty.

Remove Rusted Bolts

Apply concentrated heat with the HT1000 to easily remove stuck-on or rusted bolts.

Paint Removal

The HT1000 applies the perfect heat output to soften paint for quick and simple stripping.

Flooring Removal

Heat the glue underneath the floor and watch as boards peel back with ease.

Thaw Frozen Pipes

The two temperatures and fan speeds makes thawing pipes easy and hassle free.

• 🎁Special gift for families or friends🎁
• 🎁【High Power】 Heat gun for epoxy resin can reach at about 350℃/662℉ easily in seconds with 350W high power which can make the work more quicker and efficient.
• 🎁【Overheating Protection】 Heat gun for crafts will not get smoke or burning after long time using because of nickel-chromium heating wire structure and mica bracket, which can speed up heat dissipation and extend the service life.
• 🎁【Well Made Design】 Our portable heat guns is lightweight(0.6 lb) heat tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders; Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly.
• 🎁【Easy and Long Endurance】 Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project.
• 🎁【Wide Application and Product Service】 With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help.

User questions & answers

Question:	Does work well with heating up 3m tape to stick better on car accessories please let me know asap
Answer:	It stays on it's very well, I was surprised. That's how I set down between putting heat shrink on wires. It also comes with a curved nozzle attachment that helps direct the heat around a pipe. I used it to bend a 1 inch pvc water pipe. (Though, I would imagine, you might wanna bend the attachment into a sharper curve for PC cooling pipes.)
Question:	Would this melt soft plastic for bait making
Answer:	If you mean to use it for heat shrink tubing, yes. It's not designed for soldering of course, and it does run on two heat settings. The high setting is 1500 watts as I recall (12.5 amps) and the coil glow orange. However there is a thermal protection (reed type switch) that breaks the curcuit after about 90 seconds when it's on high (without any attachments) If you need to sustain a high setting I recommend the Wagner because it will run on high as long as it is on until the plastic case melts. It also has a tendency to melt things touching the nozzle, especially the cord when accidently thinking it's cool enough to set it down somewhere. Low settings 750 watts, no problems. 200 degrees at 1 inch. High is about 390 to 425
Question:	The description says it has high air flow. Is it good for tiny surface mount electronics or would it blow the components away
Answer:	Shrinking packaging wrapEnclose and seal the product in the shrink wrap and then poke a small hole in the wrap to allowtrapped air to escape. Move the heat gun back and forth across the package until the shrink wrap hasevenly shrunk.
Question:	Is it comfortable in the hand for long periods of time
Answer:	Yes. But just like any other smartphone screen you should do it by using it on the low setting.

Product features

350W and 662℉（350℃)

Strong power (350W) ensures it can quickly heat up to the maximum temperature 662℉(350℃) in seconds.

Superior Quality

With Nickel-chromium heating wire structure&mica bracket, it can maximize heat loss.The heat vents can decreased the internal high temperature and extend the life.

6.56Ft (2M) Long Cable

The hot air gun has 6.56Ft (2M) extended long cable, more than other competitors.

Lightweight Design

Mini lightweight fuselage so that you could hold it as easy as hold a pen.

Nozzle Accessory

The heat gun comes with a nozzle accessory, which can protect other parts of your work will not influenced by the hot air but only blow to the part you need.

Perfect for Card Making

This embossing heat gun is with 300 L / min air speed, which melts embossing powders nicely without blowing them all over the paper.

Wide Application

The mini heat gun is perfect for DIY, embossing powder, electronics repairing, heating shrinkable film, clay, rubber stamp, quick-drying coating, catalytic adhesive, PVC shrinkage of packaging.

Alerts!

• Do not touch the nozzle immediately after heating.
• Do not let the child use the heat gun alone.

Start your colorful DIY life!

Enjoy the happy time with your children, family or friends!

• ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
• ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
• ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
• ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
• ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.

User questions & answers

Question:	Can this operate in usa 110/120 vac 60hz
Answer:	Yes it will , you just need to set it up the amperage needed for Aluminum applications.
Question:	Does it vent on the sides so it doesn't interfere with cooling when it is sitting flat (hands free). Also, did it get UL approval
Answer:	yes it is ?
Question:	Could I use this to weld seams on a plastic shower curtain
Answer:	Yes, it use argon gas when do TIG welding
Question:	Will this gun stand on it's own so it can be used hands free
Answer:	the weight of machine is 7.5lb

Product features

Specification

Strong power: 1800W

Input: 110V, 50Hz

Size: 248mm*192mm (9.76"*7.56")

Dual temperature setting :

Mini: 50℃(122℉)

Max: 650℃(1202℉)

Dual airflow setting:

Low: 190L-210L/min; High: 250L-500L/mini

Cable Length: 1.6m (5.25ft)

Weight: 0.9kg (1.984lb)

Suitable Temperature Recommendations

Low

120-300℉ thaw frozen pipes

400-440℉ bend the plastics, or soften dry paint

440-550℉ soften the adhesive material

790-830℉ soften welding material

900-950℉ loosen rusted material



High

960-1000℉ remove paint

1000-1200℉ qualitative change

Car Wrapping

It's an practical garage tool that every mechanic should have in their tool box. It will give you the edge for carrying out tasks such as tinting car windows or wrapping your cars interior.

Removing rusted bolts

Heat the nut with a heat gun if it won't come off. This causes the steel to expand, which can break the rust seal. Apply heat for about a minute, then allow the nut to cool.

Shrinking PVC

Our heat guns are simple to use and have the power to efficiently shrink wrap products at the speed you need. With excellent air velocity settings, it quickly shrinks PVC and/or Polyolefin shrink film in just a few seconds

Bending pipes

Using the heat gun you can bend a piece of PVC pipe at just about any angle without using any adhesives or elbow joints. Not only convenient but also dramatically speeds up the job.

Product description

Discover the many uses of the Genesis 1500W Dual Temperature Heat Gun.

It’s a Versatile Tool for Stripping Paint and Varnish, Softening Caulking and Putty for Removal, Removing Adhesive Labels, Thawing Pipes, Gutters, Freezers, or Radiators, Loosening Rusted Nuts and Bolts, Speed-Drying Epoxy, Cement, or any Damp Surface.

Reach for the Genesis Heat Gun to light your charcoal grill, warm RC engines to help with starting, and so much more..



-Powerful 12.5 Amp Motor Delivers Heat with 1500 and 750 Watt settings.



-Stand the Heat Gun on its back for an Integrated Stand for Convenience

-Easy to Use design can be used with a single hand



-Two Deflector Nozzles, A reflector nozzle, and Air Reduction Nozzle are Included



Simply stand the unit up on the back side with the exhaust end pointed upward to cool or as a heat gun stand while you heat shrink wire insulators.



Make the Genesis Dual Temperature Heat Gun part of your tool set today and discover what Genesis Tools can do for you!

The Genesis GHG1500A is UL listed and ETL Certified, and meets all product safety requirements to be sold in the United States.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,gases,or dust.Power tools create sparks which may ignitethe dust or fumes

• 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
• High and Low Temperature Settings for Versatility
• Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
• Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
• Includes: Deflector Nozzles, Reflector Nozzle and Air Reduction Nozzle
• Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
• Warm RC engines to assist with start up

User questions & answers

Question:	Can you lay it on it’s back pointing straight up to do custom water cooiling pipes for pc
Answer:	Yes, this heat gun can be used to re-melt & smooth the tops of my soy candles? the heat gun can reach at about 200°C/390°F
Question:	im looking to attach a Reducer Nozzle, Size 9mm for electronics. will that work with this gun
Answer:	It’s not really any stronger than a good hair dryer. I’ve never tried to heat vinyl, though.
Question:	Can this be used to shrink wrap
Answer:	It doesn't blow that hard like a blow dryer, just enough for it to work on whatever product you're using it on.
Question:	Has anyone used this to remove a cracked ipad screen? How did it go? What setting
Answer:	No, work with 110v only

Product features

Genesis GHG1500A Dual Temperature Heat Gun

Versatile tool for stripping paint and varnish, soften caulking and putty for removal, remove adhesive labels. Thawing pipes, gutters, freezers, or radiators. Loosening rusted nuts and bolts. Speed-dry epoxy, cement, or any damp surface and more.

- Powerful 12.5 Amp Motor.

- Air reduction nozzle concentrates heat.

- Deflector nozzles protect glass and other surfaces.

- Reflector nozzle speeds thawing of pipes.

- 3-position rocker type switch for high temp, off and low temp.

Product description

PRULDE N2190 1500W Heat Gun is a professional power tools and the uses for a heat gun are practically endless, especially a strong one like this at 1500W. It can be used to strip paint, heat-shrink tubing, shrink film, dry out damp wood, bend and weld plastic, soften adhesives and thaw frozen pipes WHERE TO USE - It can be used to strip paint, heat-shrink tubing, shrink film, dry out damp wood, bend and weld plastic, soften adhesives and thaw frozen pipes SECURITY - Overheating Protection The built-in overheating protection design makes your heat gun safer, and more reliable HOME TOOL - Remove all packing materials, remove remaining packaging and transit supports(if existing), check the completeness of the packing content, check the appliance, the power cord, the power plug and all accessories DESIGN - 2 settings temperature settings for easy operation dial Ⅰ:800°F 300L/M Ⅱ:1100°F 500L/M , the heat gun can meet different applications PACKAGE CONTENT LIST -With 4pcs different accessory for different application needs，Purpose gun for stripping paint, thawing pipes, loosening floor tiles and much more, these are the extras that should always come with a heat gun SPECIFICATION - Watts: 1500 W Voltage: 120 V Temperature & Air Flow SettingⅠ: 800°F 300L/M SettingⅡ: 1100°F 500L/M Power Cord: 2M cable with UL plug

• 📢Friendly after-sale service--We provide replacement service instead of repairing.
• ULTRA STURDY➤Working Time Over 600 hours in max temperature(data from lab)
• ▶DUAL TEMPERATURE - 2 Temperature settings 800℉ & 1112℉ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.
• ▶STRONG POWER – Craft heat gun with 1500W heats up to maximum temperature 1112℉ quickly; Professional DC copper motor can guarantee more stable operation.
• ▶CONVENIENCE USE - The 6.5Ft power cord with UL plug supports a wider range of use, very convenient for you to move freely in large work area. In addition, The Back support gives it stability when you’re putting it down on its back so it can be used hands free.
• ▶SAFETY - Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
• ▶VERSATILE ACCESSORIES - 4 Nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.

Product description

12

• ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
• ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
• ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
• ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
• ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

User questions & answers

Question:	does it get hot enough to deform pvc(so that i would be able to adjust the shape
Answer:	Yes. It can also be used to repair holes, rips or tears in vinyl.
Question:	will this work to Heat Shrink Connectors for Electrical splicing
Answer:	Don’t no
Question:	Does it melt shrink wrap smoothly
Answer:	Same here.. and not sure if has a fan or is it intended to just use convection to direct the heat ? Mine just poured smoke and didnt seem to put out much heat. I'm used to a forced air coming out of a heat gun.
Question:	Will this work on sealing packages in bubble wrap
Answer:	Dear customer 1500D: 752℉& 1112℉(400℃ & 600℃) features High/ Mid/ Cool/ Off control [ III: 500 L/min, II: 250 L/min,I: 500 L/min, Off] 1500H: 662℉& 1112℉(350℃ & 600℃) features High/ Mid/ Off control [ II: 500 L/min,I: 300 L/min, Off] Thanks

Product description

Product Feature

• Heat Shrink Set: Heat Gun and Heat Shrink Tube.
• 328pcs different color and size tube fit all storage cases.
• You do not need a heavy industrial hot air gun to shrink the tube. Only the most suitable for your use will be the best choice.
• What's more you get?

Product Descrition

Heat Gun:

• Material: ABS Plastic
• Color: Black, White
• Length: approx. 24cm
• Power Cable: approx. 1m
• Working temp: 200 ¡æ
• Power: 300W
• Voltage: 110V 50-60HZ
• Weight: approx. 310g
• Plug Type: US Plug

Heat Shrink Tube:

• Material: Plastic
• Color: Black,Green,Yellow,Red and Blue
• Sizes: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm
• Pcs: 328

• Unique Heat Shrink Set: Containing 328pc Heat Shrink Tubing and a 24 cm Heat Gun. Both can be used together, fully considering your needs, once to meet all needs.
• Various sizes of heat-shrink tubing: The ultra-large capacity 328pcs kit contains 1 mm, 2 mm, 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 14 mm, heat shrink tubing in various sizes to meet your different needs.
• Professional Grade Tubing: All heat-shrink tubing are professional tubing. High-quality standard tubing can better protect your wiring. It can be used not only to repair wires,but also for hand-made.
• This Heat Gun Professional for Plastic Pipe: This hot air tool has an operating temperature of 200 degrees Celsius（392℉）.
• Two Vents on Both Side: This hot air gun is designed with two vents on both sides, which can better dissipate heat, reduce damage and extend the service life of the air gun.

User questions & answers

Question:	Can work in 220 volts
Answer:	We do not recommend using any of our heat guns to start charcoal in a grill. if you have any questions feel free to call us at 1-800-328-8251.
Question:	How easy is it to clean
Answer:	While we have not tried it specifically for this the Furno 300 works great on all kinds of projects that require heat. I would suggest trying it on an inconspicuous piece as a trial. If you would like to discuss this or have other questions feel free to call us at 1-800-328-8251.
Question:	what is PETG
Answer:	Interesting. I understand reflow and motherboard but what is xylod? A type of flux?
Question:	Whats the Ratio of the shrink tubes 2:1 or
Answer:	200,400,500,800,1000 and 1200.

• VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!
• VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
• INSULATED - ERGONOMIC - LIGHT WEIGHT - QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
• UL-CERTIFIED - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
• AMERICAN BRAND - Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth - the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you

User questions & answers

Question:	will this work on the solder shrink tube connectors
Answer:	Yes it does. I used it to remove sticky tape from car badges. As well as applying a 3M vinyl on my headlights. It gets extremely hot
Question:	Will this work well to remove decals from a vehicle
Answer:	I haven't tried it but I suppose if you leave it pointed on the soft plastic long enough then it might melt it. That's my best guess.
Question:	Can i use this to pop bubbles in resin
Answer:	I feel like it would be to strong for smd/sme's assuming your talking about things like mother board components. The airflow seems similar to a large multi speed heat gun on low speed.
Question:	Does it work well for setting vinyl onto yeti tumblers
Answer:	The product is ergonomically designed and matched with soft rubber, which effectively reduces fatigue during long-term use. The product is equipped with a stable stand, which can be used while standing.

Product features

Heat Gun For Everything

Perfect for embossing, shrinking, wrapping, paint removal, drying, melting, weathering, soldering, image transfer, and more!

Loaded With Features

• Two Heat / Speed Settings
• Nozzle Safety Shield
• Extra Long 6-Foot Cord
• Insulated Body
• Stand included

Safe and Secure

All Chandler Tool products are UL-Safety Certified. We are committed to providing quality tool and products.

Product description

Package includes:

-2:1 Shrink Tube x 530pcs

-Heat Gun x 1

(Quantity x Supplied internal diameter)

80pcs x 1.5 x 45mm approx.

160pcs x 2.0 x 45mm approx.

60pcs x 3.0 x 45mm approx.

100pcs x 4.0 x 45mm approx.

30pcs x 5.0 x 45mm approx.

20pcs x 6.0 x 45mm

20pcs x 8.0 x 45mmapprox.

20pcs x 10.0 x 45mm approx.

20pcs x 10.0 x 45mm approx.

20pcs x 10.0 x 45mm approx.







Minimum Shrinkage Temp: +70°C

Full Shrinkage Temp: +110°C maximum

Operating Temperature: -55°C to + 125°C

Supplied internal diameter: 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm,10mm

Item Shape: Round/Flat

Color: Black, Red, Blue, Yellow, Green,Clear

• Tube Material:Made of Polyolefin, Shrinkage Ratio:2:1 (will shrink to 1/2 its supplied diameter)
• Length: 45mm, Internal Diameter: 1.5mm/2mm/3mm/4mm/5mm/6mm/8mm/10mm，Shrinking ratio: 2:1
• Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and daily repairs etc
• Heat Gun: 3.3 FT Long Cable. Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
• Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life

User questions & answers

Question:	will this work on the solder shrink tube connectors
Answer:	window yes, but on paint I wouldn't try it. Gets to hot. I would use WD-40 after you peel the sticker off and that will clean up the residue.

Product description

The DCE530B 20V max* cordless heat gun can take you places your corded heat gun can't. The cordless heat gun's compact design allows for use in tight spaces and diverse applications. From heat shrinking wire tubing to paint and decal removal, This cordless heat gun gets the job done. It features up to a 990 degrees F max output temperature** and comes with two temperature settings. The specialty Lock on and off feature allows for hands free operation as needed. The nozzle is the standard size of traditional heat guns, allowing attachments from corded units and other brands to fit with ease. This cordless heat gun includes a flat nozzle and hook nozzle attachment. Battery and charger sold separately.

• Up to 990 degrees F/532 degrees C max output temperature
• Up to 42 minutes of run time per charge
• Led light to brighten dark areas when tool is in use
• Lock off trigger to engage manual operation
• 6.7 CFM

User questions & answers

Question:	Can this be used to loosen glued furniture dowels
Answer:	ground-5foot, plug to outlet-6foot,&lead-5foot
Question:	Does this heat gun have a re settable fuse
Answer:	Yes
Question:	will it work on tpo or epdm
Answer:	I've also saw inetub seems good if you want to buy local get lincoln nr211 mp inershield wire I use .030 size for most of my use make sure the tip size on gun matches your wire common sizes are .025 .030 .035 .025 is usually used with gas so really you would want .030 .035 thicker metal thicker wire you want
Question:	What is the approximate temp at the low setting
Answer:	Wrong answers!! But you need a welder capable of using shielding gas, and you'd use 100% argon. Aluminum wire is soft and it wouldn't make it from the machine to the torch handle so you'd want a spool gun (which would cost twice as much as this chintzy welder). So yes you can use a DC welder to weld aluminum, just not this welder. Probably cost you nearer to $1000 to get a capable setup for aluminum.

• ★【MAKE YOUR LIFE COLORFUL】This hot air gun is not only the best gift for DIY enthusiasts, it is also great for parents to make crafts with kids to enjoy the fun and creativity. Just buy it right now!
• ♥ It is a mini heat gun with temperature 662°F for small craft jobs, please don't expect it is hot as industrial heat gun which is 1202°F for heavy duty projects. ♥
• ★【HIGH QUALITY & SAFER 】Built in over-heat protection, if the temperature is overheated, the curent of this craft heat gun tool will be cut off automatically to avoid melting and fire. Made of high quality impact-resistant plastic body and with nozzle safety shield, CUBEWAY hot air gun cares more about the users’ security.
• ★【ERGONOMIC DESIGN】Pencil-like design and weight just over a pound let this heat embossing gun fit comfortably in your hand. With 3 usage postions, this mini heat gun is ideal for getting into hard-to-reach places and concentrating high heat on the tight area.
• ★【EFFICIENT & CONVENIENT】 Professional mini heat gun with 3.0Amp motor enables reach 662°F within seconds which make the work more efficiently. 6.56ft ultra long cable helps you make crafting in large area more conveniently. Retractable bracket lets this heat shrink gun stand on the table safely and use it hands-free.
• ★【VERSATILE APPLICATION】It is good choice to use this heat gun for shrink wrapping, soldering, paint and mud removing, candle making, electronics repairing, watercolor drawing drying, defrosting and air bubble remover for acrylic resin cups, there are tons of other ways you can use it.
• ★【WHAT YOU GET】1pc 350W mini heat gun for crafts, 1pc spoon reflector nozzle, 1pc additional replaceable protection cap, 40pcs heat shrink tubes, 1pc instruction manual, 7x24 customer service and 2 years quality guaranty.

Product features

Versatile Heat Gun for Craftes and DIY Projects

Safer: CUBEWAY embossing heat gun is approved by ETL which will provide the better protection to every user. Plastic insulated body with nozzle safety shield ensures you not to be hurt accidently.

Professional: Featured with 350W 662°F high power and 6.56ft cable, this soldering heat gun is superior advantageous than most of the other generic heat guns which are with only 300W 392°F and 3ft cable.

Ergonomic: The grip of this heat gun is pretty comfortable and the light weight is easy on your wrists. The retractable stand is for self-support and table top use freely. It is compact but powerful to do various domestic and craft projects.

Versatile: This heat gun tool doesn't only help cutting drying time of crafts and paintings but also does a good job of getting rid of the bubbles. It is not only great for installing phone screens but also for wrapping PVC shrink capsules. It is a must for any DIYer.

Multiple accessories: 1pc heat deflector which protects surrounding wires while working in tight spaces. 40pcs various sizes heat shrinking tubes which will meet your different needs. 1pc additional protection cap to secure further service if the original one is damaged.

Attention: Keeping 5-6cm distance between the heat tool and working items and about a 45 degree angle to heat until it is completed! Do not use more than 10 minutes continuously to prevent overheated! Do not touch the nozzle! Do not touch with water! Keep it out reach of children!

Hand Free

Retractable bracket lets this heat shrink gun stand on the table safely and use it hands-free

Pen Grip

Pencil-like design lets this heat embossing gun get into hard-to-reach places.

Palm Grip

Ergonomic body design fits comfortably in your hand to enjoy the DIY happiness.

Multi Accessories

1pc spoon reflector nozzle, 1pc additional protection cap and 40pcs heat shrink tubes to make you start work instantly

Ultra Long Cable

6.56ft ultra long cable helps you to use this heat gun in large area more conveniently.

High Power

This mini heat gun with 3.0Amp motor enables reach 662°F within seconds which make the work more efficiently.

Shrink Wrapping

Use the Mini Heat Gun to concentrate heat to wrap shrink plastic around gift box, candy and more.

Electronic Repairing

Reach high heat fastly to the electronic components to make the jobs done quickly.

Painting Removing

With 662°F high temperature, this hot air gun make your painting renovating more conveniently.

Tube Shrinking

Apply heat with CWH350 to securely shrink the tube around the damaged wires and cables.

Product description

The Porter-Cable PC1500HG Heat Gun has a dual fan speed selector that delivers high and low fan speed settings. The variable temperature control dial allows for easy adjustment of temperatures. It has an integrated hands free support stand that allows the gun to sit upright for hands free use. The integrated hanging hook is ideal for storage. The lightweight, only 2-pound, gun offers less fatigue when holding. It has a 1500-Watt motor that delivers high heat and multiple fan settings. Its 6-Feet high grade cord improves flexibility during cold use. Perfect for applications such as: Paint removal, Bending plastic pipes, welding plastics, Removing adhesive tiles, Shrinking plastic tubing.

• 1500 Watt motor
• Dual fan speed selector
• Variable temperature control dial
• Integrated hands free support stand
• 6 Feet high grade cord

User questions & answers

Question:	What type of warranty does this have
Answer:	I do not think they are for cutting depth, the adjudgment screw in the middle of the cutting head is how you adjust the dept.
Question:	is it normal for it to smoke even after a few uses
Answer:	Mine came with a snap-in adapter that fits a 1-1/4 inch vacuum hose. I use a piece of duct tape to secure it.
Question:	what temperatures does this use
Answer:	Search for EPA rules to gain an understanding of all the aspects of lead paint removal. Must use HEPA Vac, N-100 or P-100 respirator, seal and dispose of waste properly. It's doable, but must be done right.
Question:	Compared to a typical hair dryer, is it as noisy
Answer:	I used this tool to remove the paint off a staircase within a house that was built in 1892. The steps had many layers of paint, which I brought back down to the original yellow pine wood, it worked extremely well. I quickly went through 32 steps in a couple of days, which included removing nails hidden beneath the layers of paint and sanding with a finish sander. Just make sure you get additional blades that are affordably priced so that you continually have sharp blades doing the work.