9 best battery operated heat guns

Product description

The DCE530B 20V max* cordless heat gun can take you places your corded heat gun can't. The cordless heat gun's compact design allows for use in tight spaces and diverse applications. From heat shrinking wire tubing to paint and decal removal, This cordless heat gun gets the job done. It features up to a 990 degrees F max output temperature** and comes with two temperature settings. The specialty Lock on and off feature allows for hands free operation as needed. The nozzle is the standard size of traditional heat guns, allowing attachments from corded units and other brands to fit with ease. This cordless heat gun includes a flat nozzle and hook nozzle attachment. Battery and charger sold separately.

• Up to 990 degrees F/532 degrees C max output temperature
• Up to 42 minutes of run time per charge
• Led light to brighten dark areas when tool is in use
• Lock off trigger to engage manual operation
• 6.7 CFM

User questions & answers

Question:	Can this be used to loosen glued furniture dowels
Answer:	ground-5foot, plug to outlet-6foot,&lead-5foot
Question:	Does this heat gun have a re settable fuse
Answer:	Yes
Question:	will it work on tpo or epdm
Answer:	I've also saw inetub seems good if you want to buy local get lincoln nr211 mp inershield wire I use .030 size for most of my use make sure the tip size on gun matches your wire common sizes are .025 .030 .035 .025 is usually used with gas so really you would want .030 .035 thicker metal thicker wire you want
Question:	What is the approximate temp at the low setting
Answer:	Wrong answers!! But you need a welder capable of using shielding gas, and you'd use 100% argon. Aluminum wire is soft and it wouldn't make it from the machine to the torch handle so you'd want a spool gun (which would cost twice as much as this chintzy welder). So yes you can use a DC welder to weld aluminum, just not this welder. Probably cost you nearer to $1000 to get a capable setup for aluminum.

Product description

The DCE530P1 20V max* cordless heat gun can take you places your corded heat gun can't. The cordless heat gun's compact design allows for use in tight spaces and diverse applications. From heat shrinking wire tubing to paint and decal removal, This cordless heat gun gets the job done. It features up to a 990° F Max output temperature** and comes with two temperature settings. The specialty Lock on and off feature allows for hands free operation as needed. The nozzle is the standard size of traditional heat guns, allowing attachments from corded units and other brands to fit with ease. This cordless heat gun kit includes a flat nozzle and hook nozzle attachment, as well as a DCB205 5Ah battery and charger.

• Up to 990 degrees F/532 Degrees C max output temperature**
• Up to 42 minutes of runtime per charge**
• Led light to brighten dark areas when tool is in use
• Lock off trigger to engage Manual operation
• 6.7CFM****

User questions & answers

Question:	Can I light charcol with this heat gun
Answer:	It's a three position toggle switch - Off, Low, and High. It stays in whichever position you put it in.
Question:	What is the voltage of the charger 110 or 220 v
Answer:	I used the gun for heat treating (pulling oils out of poly plastics). It didn't work well for that application but, I was definitely effective on melting/softening plastics with the different heat selections. Not sure it that has helped or not. Take care and good luck
Question:	I want buy an extra battery
Answer:	If you're talking about EVA foam: yes. Just make sure you don't set it too hot. EVA foam begins to melt at around 165 fahrenheit, so set the gun to 200 and wear a respirator. DO NOT WEAR A DUST MASK! If it doesn't have replaceable filters, it's a dust mask, which is for keeping dust and other large particles out of your airway and making smelly jobs more comfortable. It DOES NOT protect against the toxic vapors that will be released when you get EVA foam hot enough to shape or seal it. Set the gun to 200F (assuming you're working with EVA foam), work OUTDOORS and wear a respirator (not a painter's mask/dust mask!). Hotter might be okay but since the gun only goes in increments of 50, you might not want to go above 200. Try it with a scrap piece and see how it goes.
Question:	Viene con batería y cargador
Answer:	Hey Susieq It's not the heat gun that you need to be concerned about, IT’S THE PAINT!!! Until 1978 lead base paint was manufactured. Get lead paint testers to see what you are working with. These paints are a health hazard when they give off vapors. Look online to find out the hazards about lead base paints. The EPA has guide lines for contractors to follow that vary from state to state in the USA. Like respirators and white suits along with using drop clothes to contain that type of paint. Different paints will soften at different temperatures. I find around 700 degrees may be a good starting point. If you go too high with the heat you'll burn the wood. To low and the paint won't soften. That's basically it in a nut shell. Kevin M

Product description

The Worx MAKERX Mini Heat Gun was made for embossing paper and cards, or drying painted or glued crafts quickly. It’s indispensable for projects where you need to warm up plastic or wood for shaping. It’s great for heating shrink plastic around a product for shipping, gifting, or selling, to give it that professionally packaged look. But it has so many uses around the home that everyone in the family will be glad it’s there. Thaw frozen door locks, valves, pumps and spigots. And it’ll heat old paint or adhesive, making it easy to remove. The slim design allows you to hold it like a marker when you need to heat an area directly, and makes it easier to move around the project. MAKERX has created crafting and hobby tools that are smaller, but more powerful—the secret lies in the Hub. It’s a power source that you can take with your tool, so if you want to work in the middle of a large space, you can, and still have the power to get the job done. Thoughtful design allowed Worx engineers to make these tools slimmer, so you can hold them with more precision, and provide a level of detail to your projects that’s not possible with other tools. This model doesn’t come with the MAKERX Hub or a 20V Power Share battery, but that’s by design. Because if you already have a Hub and a battery, there’s no need to buy it again. It’s a great way to save money as you build up your MAKERX tool collection.

• [QUICK HEAT UP] Nearly instant warm up to 500 degrees Fahrenheit. No waiting around for it to be hot enough like other heat guns
• [NARROW FOCUS NOZZLE] Precisely control the location and direction of the heat. Perfect for small, detailed craft work
• [SHARE BATTERIES, SAVE MONEY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [MICRO-ERGONOMIC DESIGN] All MAKERX tools are specially designed to be compact, so they’re more comfortable to hold for long stretches, and are easier to maneuver
• [PROP STAND] Built-in cradle holds the hot nozzle away from delicate work surfaces
• [HUB + FLEX CORD] Every tool on the MAKERX platform is powered by the Hub and its rechargeable 20V Power Share battery (Hub and battery not included with this model). The Hub is the only portable 20V power system for hobby and crafting tools on the market
• [FLEXIBLE POWER CORD] 4-foot long cord attachment allows for unencumbered movement when working
• [GO-ANYWHERE CREATIVE TOOLS] MAKERX tools, and their power, go wherever you go and they don’t need to be near an outlet to plug into

User questions & answers

Question:	Have worx batteries, would like to get this. anyone tried using this to sear meats? like steaks, chicken or pork? thanks
Answer:	The sheath that comes with this Machete is spot on, I like it because its stiff, and what feels like a padding within. I like it that much, that I'm buying another after I end this reply with a Period.
Question:	can you get nozzles for it? specifically the curved nozzle for heat shrink tubing
Answer:	It means the blade is all the way to the end of the handle,some knives the blade stop at the beginning of the handle but with a full tang its more durable as the blade is built into the handle.
Question:	Can I use this without the cord
Answer:	Not a full tang, but not a rat tail either. More like a 3/4 tang. The tang goes to the end of the handle; however, the tang doesn't cover the entire width of the handle. The tang width is more like 3/4 width of the handle. The handle is riveted so I can't remove it to check. My old Collins machete is a true full tang but I suspect that none of the Tramontina machetes are full tang.
Question:	Can you adjust the heat to hold at a temperature
Answer:	No more than 1/4". It has a bit of flex and holds an edge fairly. Sinks deeply into thick objects (3" diameter tree branch, when sharpened, cuts 2+ " deep

Product features

Powered by the Hub

Once you have one Hub, that’s all you need to power every MAKERX tool. It utilizes the same 20V Power Share batteries we use to run our drills and chainsaws. *Hub/battery not included with this model.

Take Your Power With You

There’s no need to be tethered to an outlet. Take the Hub anywhere you go and make anywhere you want. Craft without restrictions.

Near Instant Warm-Up

Faster than other heat guns, it quickly reaches up to 500° F, so you’re ready to get to work. Excellent for drying, embossing, heat shrinking, defrosting and more.

Pinpoint Nozzle

Narrow nozzle focuses heat exactly where needed—ideal for intricate or delicate projects.

Slimmer Design

All MAKERX tools feature a micro-ergonomic form factor, so not only are they easier to grip and manipulate, but they’re more comfortable to hold for long stretches.

Cradle Stand

Built-in prop prevents burns on tabletops or the surface of the project. You don’t have to search for a safe place to set your hot heat gun.

The Freedom to Move

The Hub plus its flexible 4-foot cord lets you move freely around the project as you apply heat. And with 20v of Power Share backing it up, you’ll get consistent heat and a longer runtime than other heat guns.

So Many Uses

Shrink wrap your projects before shipping, gifting, or selling. Maybe you’re embossing papercrafts & cards. Perhaps you’re warming up wood or plastic for shaping. Thaw frozen locks, valves, pumps and spigots. Remove stubborn lids from jars, or loosen seized nuts.

Product description

features and benefits: high performance heating Coil: reach operational temperature in 6 seconds redlink™ intelligence: temperature management system provides maximum life most compact Electric heat gun: 6.35&Rdquo; long guarded nozzle: prevents contact with unprotected surfaces kit includes: m18™ heat gun, M18 XC5.0 battery, charger, 3/8” concentrator nozzle, hook nozzle & carrying case The m18™ compact heat gun performs applications quickly by delivering the temperature of corded heat guns (1000° F). the high performance heating Coil reaches operational temperature in less than 6 seconds, eliminating downtime. As the most compact heat in the market, it can go places where corded heat guns can’ T. The guarded nozzle and ladder hook prevent the tool from coming in contact with unprotected surfaces. Powered by redlithium™ battery technology, it is able to heat over 40 connections on a single XC5.0 battery, anywhere, anytime without the hassle of cords. The m18™ compact heat gun features Redline plus™ intelligence with a temperature management system to provide maximum life.

• features and benefits: high performance heating Coil: reach operational temperature in 6 seconds redlink&trade
• This product meets customer requirement
• Product is easy to use

User questions & answers

Question:	Does this blow air, like a hair dryer? I’m looking for something like a hair dryer but, more powerful to thaw airlines and valves on my semi truck
Answer:	Hello You can find several different type of accessories on Amazon for this product by copy and paste the ASIN numbers in the below in the Amazon search box 1. B0892S9XMR, this item includes mini wrench, heat deflector, 1.6mm & 2.4mm conical tips, 2.4mm chisel tip 2. B0892ST113, hot knife 5pcs pack 3. B0892RQ7G1, 2.4mm conical tip 5pcs pack 4. B0892SVGVT, 2.4mm chisel tip 5pcs pack 5. B0892V3788, 1.6mm conical tip 5pcs pack 6. B0892WN98L, 2.4mm diagonal tip 5pcs pack all these accessories are shipping from our warehouse and usually take 3 to 4 business day to arrive. Let me know if you any further questions. Thanks
Question:	Does this come with 2 batteries
Answer:	In the middle of the body there is a see through window that you can check butane level
Question:	What attachments does the kit include
Answer:	With the supplied tips on it, byremoving the pointed soldering tip you can have a decent flame for heat shrink tubing. I absolutely love this torch!!
Question:	Is the temperature variable
Answer:	It is really depends on what you are working on, because this product has max 125W heat output so it is only suitable for a small project.

• 📢Upgrade Cordless Heat Gun Bring More Convenience to Your Life
• Friendly Customer Service-- 30-day quick return & new replacement service within 2 years.
• 🔰【Cordless and compact】-- This portable cordless design makes this heating gun more convenient to use in high altitude, outdoor, indoor, and other environments. The compact design allows for work in tight spaces.
• 🔰【Up to Max 1022℉output temperature】--This versatile battery heat guns delivers a high temperature of1022°F for a variety of spot jobs, reaching an operational temperature in less than 10 seconds to increase productivity on the jobsite and for DIY jobs around the house.
• 🔰【Double safety mechanism & hands-free operation】--Equipped with a double safety mechanism to ensure your safety. Lock-off the trigger to engage manual operation and achieve hands-free.
• 🔰【4 Types of Nozzles】-- PRULDE heat air gun with 4 nozzle attachments for shrink wrapping, vinyl wrap, paint stripping, tube bending, crafts, cell phone repair, car wrapping, stickers, sterilization and more. Additional concentrator nozzle intensifies heat for specific areas.
• 🔰【Innovative cellular heating technology】 -- The wireless hot air gun has a unique cellular tuyere to make air heating more uniform and fast.

User questions & answers

Question:	Are additional batteries available for product? If not, where can I buy a spare battery for the gun
Answer:	A heat gun is not ideal for removing dowels in wood. You'll want to use a little lacquer thinner sparingly on the joint or dowel. Test the furniture first in an inconspicuous area to make sure the lacquer thinner doesn't damage the finish of the furniture.
Question:	How long will it continuously run on a full 4.0 battery
Answer:	Nono, the fuse are un the DeWalt batery
Question:	Will DeWalt 20 V battery work with this heat gun
Answer:	Would depend on a lot of factors. Outside air temp , size , length and so on. Lets just say I found it to be about half as effective as a high end plug in heat gun. But for small out of the way jobs it is perfect. No dang cord to run. If you have a big job run a cord.
Question:	Can I release the safty device after I press it
Answer:	500 degrees on low and 990 high

Product features

PRULDE 20V Max Lithium-ion Cordless Heat Gun

The PRULDE 20V MAX Compact Lithium-Ion Cordless Heat Gun is a compact and powerful cordless heating gun with lock-off design to achieve hands-free. Up to 1022 F Max temperature higher than comparable cordless tools.

The cordless tool is a kit and includes the fast-charging 20V Max Compact Lithium-Ion battery and efficient Rapid Optimum Charger.

• 🎁Special gift for families or friends🎁
• 🎁【High Power】 Heat gun for epoxy resin can reach at about 350℃/662℉ easily in seconds with 350W high power which can make the work more quicker and efficient.
• 🎁【Overheating Protection】 Heat gun for crafts will not get smoke or burning after long time using because of nickel-chromium heating wire structure and mica bracket, which can speed up heat dissipation and extend the service life.
• 🎁【Well Made Design】 Our portable heat guns is lightweight(0.6 lb) heat tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders; Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly.
• 🎁【Easy and Long Endurance】 Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project.
• 🎁【Wide Application and Product Service】 With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help.

User questions & answers

Question:	Does work well with heating up 3m tape to stick better on car accessories please let me know asap
Answer:	It stays on it's very well, I was surprised. That's how I set down between putting heat shrink on wires. It also comes with a curved nozzle attachment that helps direct the heat around a pipe. I used it to bend a 1 inch pvc water pipe. (Though, I would imagine, you might wanna bend the attachment into a sharper curve for PC cooling pipes.)
Question:	Would this melt soft plastic for bait making
Answer:	If you mean to use it for heat shrink tubing, yes. It's not designed for soldering of course, and it does run on two heat settings. The high setting is 1500 watts as I recall (12.5 amps) and the coil glow orange. However there is a thermal protection (reed type switch) that breaks the curcuit after about 90 seconds when it's on high (without any attachments) If you need to sustain a high setting I recommend the Wagner because it will run on high as long as it is on until the plastic case melts. It also has a tendency to melt things touching the nozzle, especially the cord when accidently thinking it's cool enough to set it down somewhere. Low settings 750 watts, no problems. 200 degrees at 1 inch. High is about 390 to 425
Question:	The description says it has high air flow. Is it good for tiny surface mount electronics or would it blow the components away
Answer:	Shrinking packaging wrapEnclose and seal the product in the shrink wrap and then poke a small hole in the wrap to allowtrapped air to escape. Move the heat gun back and forth across the package until the shrink wrap hasevenly shrunk.
Question:	Is it comfortable in the hand for long periods of time
Answer:	Yes. But just like any other smartphone screen you should do it by using it on the low setting.

Product features

350W and 662℉（350℃)

Strong power (350W) ensures it can quickly heat up to the maximum temperature 662℉(350℃) in seconds.

Superior Quality

With Nickel-chromium heating wire structure&mica bracket, it can maximize heat loss.The heat vents can decreased the internal high temperature and extend the life.

6.56Ft (2M) Long Cable

The hot air gun has 6.56Ft (2M) extended long cable, more than other competitors.

Lightweight Design

Mini lightweight fuselage so that you could hold it as easy as hold a pen.

Nozzle Accessory

The heat gun comes with a nozzle accessory, which can protect other parts of your work will not influenced by the hot air but only blow to the part you need.

Perfect for Card Making

This embossing heat gun is with 300 L / min air speed, which melts embossing powders nicely without blowing them all over the paper.

Wide Application

The mini heat gun is perfect for DIY, embossing powder, electronics repairing, heating shrinkable film, clay, rubber stamp, quick-drying coating, catalytic adhesive, PVC shrinkage of packaging.

Alerts!

• Do not touch the nozzle immediately after heating.
• Do not let the child use the heat gun alone.

Start your colorful DIY life!

Enjoy the happy time with your children, family or friends!

Product description

The HT1000 Heat Gun is a dual temperature heat gun that can help you quickly complete countless DIY projects using high temperature heat outputs. It uses a 750ᵒF and 1000ᵒF temperature setting to easily loosen rusted bolts, remove flooring, and thaw frozen pipes. It is a heat gun for shrink wrap, heat gun to remove paint, and so much more! The gun uses 1200 watts of power to easily complete countless home improvement projects. Its durable and lightweight design applies effective, concentrated heat for various project needs. The gun also features an integrated stand to provide safe, hands-free operation.Hello, The product details on Amazon.com aren't displaying correctly, which will lead to a bad customer experience. Please update this ASIN immediately with this information.

• DUAL TEMPERATURE HEAT GUNS: The HT1000 Heat Gun offers a 750ᵒF and 1000ᵒF temperature setting to easily help complete household home improvement tasks
• HEAT GUN FOR HOUSEHOLD PROJECTS: Use this heat gun to soften paint, caulking, adhesive or putty for removal. Other applications include shrink wrap, bend plastic pipes, and loosen rusted nuts or bolts
• HEAT GUN ADJUSTABLE SETTINGS: The two fan speeds provide additional control to customize to your project needs
• HANDS FREE OPERATION: Features an integrated stand for safe, hands-free operation to help prevent the hot nozzle from touching your work surface
• DURABLE FOR GENERAL USE: Features a corrosion resistant nozzle for long lasting use and integrated hanging hook to easily store on a peg wall or workbench

User questions & answers

Question:	Is this heat gun the same one as the Hero Arts heat gun? Thanks
Answer:	Yes, you need the Iroda PS-95 replacement tip. I sell this on eBay under the company Eddy Products. Just do a search for MJ-950 replacement tip, PS-95 and it should pop up. thanks Kevin
Question:	Hello guys I need to know if it is working V120 or V
Answer:	Hey Ryan, This unit does not have an internal blower wheel, so there are no real CFM’s for the MJ-950, however at the tip it does get to 1400 degrees F on full throttle. You can do a lot of damage at such high temps. And if that’s not hot enough, I don’t know what would be. Just be really careful if you go that route. Hope this helps! Kevin
Question:	removing old paint
Answer:	Not a good idea for several reasons, I'll only pick one: Car door handles contain plastic, as do the locking mechanisms. You would be better served to use a lock deicer rather than a heat gun. This unit gets hot enough to remove the paint from your car, so you'd surely melt the lock and handle into so much useless gunk.
Question:	I seen this has a 3-prong plug. If I get a 2 prong adapter and reverse polarity, can I use it to cool things down
Answer:	No, the CRAFTSMAN and BLACK+DECKER Brands are not interchangeable.
Question:	replacement tips
Answer:	No it doesn’t
Question:	Does it get hot enough for emblems in cars to help them stick
Answer:	Home Depot
Question:	Could this be used to meal frozen car door handles
Answer:	Save your money. It’s junk!!

Product features

Versatile Wagner Heat Gun for Home Use

The Wagner HT1000 heat gun is an easy-to-use hot air tool that applies focused heat for removing paint, thawing pipes, loosening rusted bolts and more.

Two Temperatures Settings

Find the perfect heat setting for your project needs by switching between the two temperature settings. The heat gun offers a low 750°F and high 1000°F setting.

Perfect Design for Extended Use

With a corrosion resistant nozzle and rugged, lightweight handle, the HT1000 is durable enough to power through tough jobs and big projects. We’re confident in our product’s performance, which is why this durable heat gun is backed by a 2 year warranty.

Remove Rusted Bolts

Apply concentrated heat with the HT1000 to easily remove stuck-on or rusted bolts.

Paint Removal

The HT1000 applies the perfect heat output to soften paint for quick and simple stripping.

Flooring Removal

Heat the glue underneath the floor and watch as boards peel back with ease.

Thaw Frozen Pipes

The two temperatures and fan speeds makes thawing pipes easy and hassle free.

Product description

12

• ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
• ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
• ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
• ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
• ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

User questions & answers

Question:	does it get hot enough to deform pvc(so that i would be able to adjust the shape
Answer:	Yes. It can also be used to repair holes, rips or tears in vinyl.
Question:	will this work to Heat Shrink Connectors for Electrical splicing
Answer:	Don’t no
Question:	Does it melt shrink wrap smoothly
Answer:	Same here.. and not sure if has a fan or is it intended to just use convection to direct the heat ? Mine just poured smoke and didnt seem to put out much heat. I'm used to a forced air coming out of a heat gun.
Question:	Will this work on sealing packages in bubble wrap
Answer:	Dear customer 1500D: 752℉& 1112℉(400℃ & 600℃) features High/ Mid/ Cool/ Off control [ III: 500 L/min, II: 250 L/min,I: 500 L/min, Off] 1500H: 662℉& 1112℉(350℃ & 600℃) features High/ Mid/ Off control [ II: 500 L/min,I: 300 L/min, Off] Thanks

• ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
• ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
• ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
• ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
• ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.

User questions & answers

Question:	Can this operate in usa 110/120 vac 60hz
Answer:	Yes it will , you just need to set it up the amperage needed for Aluminum applications.
Question:	Does it vent on the sides so it doesn't interfere with cooling when it is sitting flat (hands free). Also, did it get UL approval
Answer:	yes it is ?
Question:	Could I use this to weld seams on a plastic shower curtain
Answer:	Yes, it use argon gas when do TIG welding
Question:	Will this gun stand on it's own so it can be used hands free
Answer:	the weight of machine is 7.5lb

Product features

Specification

Strong power: 1800W

Input: 110V, 50Hz

Size: 248mm*192mm (9.76"*7.56")

Dual temperature setting :

Mini: 50℃(122℉)

Max: 650℃(1202℉)

Dual airflow setting:

Low: 190L-210L/min; High: 250L-500L/mini

Cable Length: 1.6m (5.25ft)

Weight: 0.9kg (1.984lb)

Suitable Temperature Recommendations

Low

120-300℉ thaw frozen pipes

400-440℉ bend the plastics, or soften dry paint

440-550℉ soften the adhesive material

790-830℉ soften welding material

900-950℉ loosen rusted material



High

960-1000℉ remove paint

1000-1200℉ qualitative change

Car Wrapping

It's an practical garage tool that every mechanic should have in their tool box. It will give you the edge for carrying out tasks such as tinting car windows or wrapping your cars interior.

Removing rusted bolts

Heat the nut with a heat gun if it won't come off. This causes the steel to expand, which can break the rust seal. Apply heat for about a minute, then allow the nut to cool.

Shrinking PVC

Our heat guns are simple to use and have the power to efficiently shrink wrap products at the speed you need. With excellent air velocity settings, it quickly shrinks PVC and/or Polyolefin shrink film in just a few seconds

Bending pipes

Using the heat gun you can bend a piece of PVC pipe at just about any angle without using any adhesives or elbow joints. Not only convenient but also dramatically speeds up the job.