11 best 3m vapors

Product description

NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieceswith 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Cartridge or Filter Type Cartridge / Filter Combo
• Gas & Vapor Protection Type: Organic Vapor/Acid Gas/Ammonia/Methylamine/Formaldehyde
• NIOSH Cartridge or Filter Assigned Color Coding: Magenta/Olive

User questions & answers

Question:	Why are they pink
Answer:	No. The quick latch would be #6503QL. Thank you for considering 3M products.
Question:	Would this work with cigarette smoke. I cant get a family member to quit and I don't want to breathe their carcinogenic smoke
Answer:	Blocks cigarettes sent the same way it blocks the occasional passing of gas. ...not well.
Question:	Can the filter be cleaned and reused
Answer:	Need to buy seperate
Question:	Will protect me against the zombie apocalypse
Answer:	Yes

Product features

3M Multi Gas/Vapor Cartridge

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

This multi gas/vapor cartridge/filter combination works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter has been assigned the color code 'Magenta/ Olive' in the NIOSH system.

Product description

NIOSH approved against certain organic vapors and non-oil and oil particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• NIOSH approved against certain organic vapors and non-oil and oil particulates
• USE WITH 3M Half and Full Face Pieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter
• SWEPT BACK DESIGN allows an enhanced field of view and increased comfort
• VARIETY OF USES: When properly fitted, use in a variety of applications including chemical clean-up, compounding, and transfer; laboratories; and pesticide applications as well as in the following industries: agriculture, chemicals, mining, oil and gas, pharmaceuticals, and primary metals.
• EASY TWIST ON AND OFF: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs.
• For industrial/occupational use only. Not for consumer sale or use.
• Combined Organic vapor cartridge with P100 particulate filter

User questions & answers

Question:	Change out time is 30 days or 40 hours of use, and i opened my filters about 30 days ago but i have barley used them for an hour. do i need to change
Answer:	I change them as needed. I use mine infrequently as well, so change filters when I start feeling they are not effective anymore. Mine have lasted much longer than 30 days/40 hours.
Question:	How can i order another set of these for my husband's mask who is working directly with c-19 patients daily? he is wearing his own ppe
Answer:	If you can't get them here, try going directly to 3M. These things are twice as effective as ANY N95 mask. Good luck.
Question:	Will this filter out the hydrogen carboxylic acid, common name: formic acid, that is used in mite-away quick strips for bee hive mite treatment
Answer:	Thanks for your question. In the 3M Respirator Selection Guide (www.3M.com/respiratorselector) we suggest that either an acid gas cartridge (6002/60922) or a formaldehyde cartridge (6005/60925) may work better (longer service life) than the organic vapor cartridge (6001/60921) for filtering formic acid. Thanks!
Question:	Can these filters be washed in water without degrading their capability
Answer:	Absolutely not. The filters' main use is for filtering out organic compounds. This is achieved my means of activated carbon. The activated carbon will not work if made wet. For reference, I am able to use them pretty heavily for painting for about three months.

Product features

3M Organic Vapor Cartridge/Filter 60921

The 3M Organic Vapor Cartridge/Filter 60921 P100 helps provide protection against certain organic vapors and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapors and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face respirators or 50 times PEL with quantitatively fit tested full face respirators. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include chemical clean-up, chemical compounding, chemical transfer, laboratories, and pesticides application.

FEATURES:

• NIOSH approved for protection against certain organic vapors and particulates
• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full face respirator designs

Product description

3M Multi Gas/Vapor Cartridge 3M6006 is NIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face pieces or 50 times PEL with full face pieces. Full face pieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half face piece respirators when used against formaldehyde.

• Multi gas/vapor cartridge
• For use with 3M half and full face pieces - 6000, 7000 and FF-400 series
• Cartridges and filters

User questions & answers

Question:	How does this work with the 6200 series? i seem to be missing a hepa filter and a pink piece
Answer:	Yes and no. There are several different combinations, one being just a single lamp stand, another being a lamp stand and dome, and so on.
Question:	Do it have the cap for n95 filter
Answer:	Hi there, good question. The dimensions when folded are: 37.5 x 22.5 x 16.6 in. For the 'standing up' dimensions, please contact the EGO team for assistance: 1-855-346-5656. Thank you for your question.
Question:	Expiration/use by date
Answer:	Hello, The touch drive is a button on the underside of the handle, left and right. These are able to be pressed whether wearing gloves or not. Thank you for your inquiry!
Question:	Do I get 2 sets ( 4 cartridges ) for the price? thanks
Answer:	Hi. The same model number is sold at a couple of other places with the 10.0 ah battery for around 749.00. Lowes and ACE Hardware. But they only carry up to the 7.5 ah battery for sale separately.
Question:	are these rated for Acrylic Urethane auto paint? - what indicates that they are rated for urethane chemicals
Answer:	The EGO self-propelled Select Cut XP mower delivers a torque of about 8.3 ft-lb. The Select Cut technology comes with three interchangeable blades: the extended runtime blade, the high lifting bagging blade, and the mulching blade. All the blades are interchangeable depending on your choice. With the intuitive Touch Drive technology, you can control the system entirely in your hands.
Question:	Are these actual 3m organic vapor filters , set of two
Answer:	Nothing but a piece of purple vinyl.
Question:	Are these equal to N95? I cant find anything online about the specs. Thanks
Answer:	No it doesn’t come with the vape
Question:	Are these sold in pairs
Answer:	I use the golden side. Of course there is impact on the brightness while using the privacy screen; yet I think that when you look at the screen right in front of you -- like you should -- the impact is negligible.

Product description

3M TEKK Protection Organic Vapor Replacement Cartridges, used by professionals for sanding and scraping of lead-based paint in certain projects, are NIOSH approved and provide at least 99.7% filter efficiency against solid and liquid particles that contain oil. Easy to use with 3M TEKK Protection 6000 Series Respirators, 3M TEKK Protection Organic Vapor Replacement Cartridges are great choice in respiratory protection for the pro when working on certain lead-based paint projects.

• Use for sanding and scraping of lead-based paint in certain projects
• Use for mold remediation in accordance with US-EPA Guidelines
• For workplace/occupational applications only

User questions & answers

Question:	will this protect from round up
Answer:	I would think so. I used these filters when I refinished my hardwood floors during the stain and oil based polyurethane coatings (very noxious fumes). The fumes were bad enough that even with windows open and fans running it kicked off my natural gas water heater due to combustion risk. Through out this hours long process over several days I used these and didn't have so much as a headache. About the 3rd day of use (~24 hours of use I'd estimate) I had to change the filters as I could start to smell the fumes through the mask. I would happily use these again and would feel safe using them for Plastidip.
Question:	Is this suitable for spraying Plastidip
Answer:	No. These do not filter the air leaving your mouth which is crucial to slowing virus spread. The air coming in would be filtered but this would be overkill and not any more effective than a N95 mask.
Question:	Will these work with the virus going round
Answer:	There is a cross-compatibility matrix for filters/cartridges and respirator models on the 3M website
Question:	Are all 3M filters and cartridges interchangeable on one of their standard respirators
Answer:	No. You need a supplied air system. Please contact the 3M Techline at 800-243-4630 to discuss options. Thank you for considering 3M products.

Product features

3M 6001PB1-1 Organic Vapor Replacement Cartridge, 1-Pair

3M Organic Vapor Replacement Cartridges, used for sanding and scraping of lead-based paint in certain projects, provide filter efficiency against solid and liquid particles that contain oil. Easy to use with 3M 6000 Series Respirators, 3M Organic Vapor Replacement Cartridges are great choice in respiratory protection for the pro when working on certain lead-based paint projects.

• Use for sanding and scraping of lead-based paint in certain projects
• Use for mold remediation
• For workplace/occupational applications only
• Fits 3M 6000 Series Respirators

Product description

3M organic vapor/acid gas cartridge for 6000 and 7000 series air purifying respirator with P100 filter. 3M cartridge/filter 60923, organic vapor/acid gas/P100 when properly fitted on 3M half and full face pieces 6000 series and 3M half and full face pieces 7000 series with bayonet style cartridge holders, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide or hydrogen fluoride and particulates at concentrations up to 10 times the permissible exposure limit (PEL) with half face pieces or 50 times PEL with full face pieces. Accessories are the major components that should be ordered with the initial product purchase. These will assure continued operation for the first 30 60 days. Not for use in environments that are immediately dangerous to life or health (IDLH). Use in a variety of applications including petrochemical, laboratories, pharmaceutical and chemical manufacturing. Safety product type: Cartridge. Resists chlorine, hydrogen chloride, hydrogen fluoride, hydrogen sulfide, organic vapors, particulates, sulfur dioxide. Standard: NIOSH 42 CFR Part 84.Swept-back design allows an enhanced field of view and comfort.

• Unique design for enhanced comfort and visibility
• Particulate filter is permanently attached to cartridge for easy, one step assembly
• Colored): Magenta, Yellow

User questions & answers

Question:	Does this come in a set of 2 cartridge filters? One for each attachment on a mask
Answer:	Yes, Part # 3M 6885. Hope this helps! National Wholesalers
Question:	Where are these made and do they filter viruses
Answer:	Yes! I purchased this mask for work. I'm a school teacher. The mask is deceptively light and every breathe circulates filtered air around your eyes and feel cool and invigorating. My experience with this mask has been very comfortable compared to the conventional mask and safety glasses.
Question:	Will this cartridge work for oxalic acid vapors
Answer:	The face shield is meant to protect your eyes from liquid chemicals/fumes and contagions. Buy a cheap ballistic face shield attach it over the full face mask?
Question:	whats the best way to know when to replace filters and keep them effective ? 3m
Answer:	Yes, the 3M respirator come in different sizes (small, medium, and large). The 3M company distinguishes the various sizes by the last 3 digits in the model number. The model 6900 is the large size. The model 6800 is medium, and model 6700 is the small. If you are and adult women, you probably should get a small size, but you might be able to wear a medium, depending on the shape and size of your face. Know that the half face and full face models (I think) use a different sequence of numbers to indicate size. For example, (not sure of the exact numbers) 6100 might indicate a small size, 6200 might be a medium, and 6300 might be a large. These masks, I think, are all called the 6000 series. Some sizes seem to be much more popular than others, (for example, small might be easier to get than large, since most men wear the large size). To test for proper fit, the mask needs to be airtight. You can only test it when you receive and try on the mask. You do this by putting on the mask with the filters completely off of the mask. Put the palm of each hand over each filter port, so that it forms an airtight seal. Then breathe in to make sure that the mask fits well enough so that the mask is sucked up more tightly against your face, and is able to hold that for a short time while you are holding your breath. It may take a little practice to get the hang of it. A leaky mask will not provide proper protection, and will not seal well if fitted so that hair gets between the rubber seal and your skin. I think that the 6000 series masks are made from a regular, lower cost rubber. I think that the 7000 series are made from silicone rubber, which probably will provide a longer operating life, and may (not sure) seal better against the skin. Silicone rubber is significantly more expensive. Silicone rubber may be less irritating to sensitive skin A half face mask is much cheaper than a full face mask, but contaminants, including viruses etc can touch the eyes and perhaps cause problems. I don't know which design is more comfortable. Some people say the half face design is more comfortable, and others say the full face design is more comfortable. The full face design might be vulnerable to the face shield fogging up, but you can probably buy from amazon an antifogging solution. Also, the full face plastic shield may need a transparent plastic anti scratch film (amazon also) to protect from scratches. etc You probably need to buy filters also. Each mask requires 2 filters. A p100 filter is more protective than a p95 filter. 'N' filters are also available. I think that the 'p' filters are rated for use if the air has oily contaminants (pesticide sprays) and may also just have a longer lifespan under average conditions (I think 40 hours for 'p' filters). I think the 'n' filters have much shorter lifespans (maybe 8 hours), but I am not sure. I think 2 types of filters are available cartridge filters, which are sort of rectangular, an are used inside a plastic retainer: and circular pancake filters. The cartridge filters are available with multiple protections intrinsic to each filter ('particulate' and 'organic vapor', combined into 1 filter cartridge). the combinations are distinguished by a specific color,(for easy identification) and also by a number. I think the 'pancake filters are only available for particulate filtration, but I am not sure. When it becomes hard to breathe through a filter, or otherwise is different than a new filter, it should be replaced with a new set of filters. Probably if the filters are known to be contaminated with infectious material (virus), they should probably be replaced also, and handled as though they were infectious (don't touch with ungloved fingers or touch your face etc). The filters are used with plastic retainers. I don't think 3M filters work with North masks. Chinese masks may work with 3M filters. Call a specialized safety equipment store for info. i am not an expert.
Question:	When the shield gets scratched, can I replace it
Answer:	A P95 rated particle filter is recommended for wood dust. Using the 3M 6503QL Half Facepiece Respirator, the 3M 2071 P95 Filter is a suggested option to consider.
Question:	Can I wear it for 3 hours in a row
Answer:	No. There are many types of filters this mask can use. Pick the filter or cartridge that protects you from your particular hazard(s). I use pink pillow 3M 2097 for welding and shop grinding.
Question:	Can the mask withstand any hard hits or projectiles or objects, like bean bag ,rubber balls metal balls rock
Answer:	No filter. But it will accept most of the 3M ¼-turn lock filters. That way you can choose your application.
Question:	How can I know if this will fit me? Are there different sizes
Answer:	The only thing I can say is that they run small. I am "average" size (5-7, 165), so I ordered a medium. It was a bit too small, so I'm returning for a large.

Product features

3M Organic Vapor/Acid Gas Cartridge/Filter 60923 P100 Respiratory Protection

The 3M Organic Vapor/Acid Gas Cartridge/Filter 60923 P100 helps provide protection against certain organic vapors, acid gases and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include chemical manufacturing, laboratories, petrochemical, and pharmaceuticals. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge/filter selection works for many different applications. This cartridge/filter is commonly used in the following industries: chemicals, general manufacturing, and pharmaceuticals.

This organic vapor/acid gas cartridge/filter works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing acid gases and non-oil and oil particulates. The cartridge has been assigned the color code 'Magenta/Yellow' in the NIOSH system.

Breathing organic vapors, acid gases and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Organic Vapor/Acid Gas Cartridge/Filter 60923 to help reduce exposure to certain organic vapors, acid gases and particulates.

About 3M Company

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eye wear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Legal Disclaimer

3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit our official site.

Product description

The 3M Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation. This organic vapor cartridge works with 3M Reusable Respirator Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. When properly selected fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces when quantatively fit tested. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

The 3M™ Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation.

Works with a variety of 3M facepieces

This organic vapor cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors. The cartridge has been assigned the color code “black” in the NIOSH system.

Importance of respiratory protection

Breathing organic vapors can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Organic Vapor Cartridge 6001 to help reduce exposure to certain organic vapors.

About 3M Company

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection, eyewear, hard hats, air and noise monitoring devices, welding lenses, garments, fall protection, reflective materials, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• NIOSH APPROVED for use against certain organic vapors. This includes painting and other applications where organic vapors are present
• USE WITH 3M 5000 Series Respirators or 3M Gas and Vapor Cartridges 6000 Series (with Adaptor 502) which are approved for use with 3M Half Facepiece 6000, 6500 and 7500 Series or 3M Full Facepiece 6000, FF-400 or 7800S Series.
• LOW PROFILE design helps maintain good field of vision.
• VARIETY OF USES: Assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating
• EASY TWIST ON AND OFF: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs.
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	How many pairs
Answer:	You can rotate the top bar 270° to form a right angle fix. but can not swivel it to angle the lamp.
Question:	does the used cartridge just pop off
Answer:	I have 75 watts in, specs may say?
Question:	Do you have 6006 cartridges
Answer:	Yes it will hold the combo lamp. However at it's highest extension, it is a little wobbly.
Question:	Is this for 30 pairs, or for 15 pairs
Answer:	The stand is made of some type of hard metal painted glossy black. Be assurred the stand is durable.

Product description

3M 60923 Organic Vapor/Acid Gas Cartridge/Filter

• Manufacturer: 3m

Product description

NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieceswith 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride
• USE WITH 3M Half and Full Face Pieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter
• SWEPT BACK DESIGN allows an enhanced field of view and increased comfort
• VARIETY OF USES: When properly fitted, use in a variety of applications including assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, handling, painting, parts cleaning, pesticide application, powder, and seal coating
• EASY TWIST ON AND OFF: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs.
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	Are these rated P
Answer:	First, you need an removable power bank, put it into connect it with the inner usb charger port, then connect your smartphone with the out charger port, it is done.
Question:	have you found goggles that work well with this mask? I have and like this mask, but am having trouble getting my various goggles to fit snug. thanks
Answer:	China
Question:	Does this mask protect against vapors of hydrochloric and/or nitric acid
Answer:	yes , it can place a mini lunch bag inside. and please one pair shoes , wish you love it .
Question:	Will these work with 3m rugged comfort half facepiece reusable respirator
Answer:	So far it is very durable, very good quality. Very satisfied would definitely buy again.

Product features

3M Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

The 3M Organic Vapor/Acid Gas Cartridge 6003 helps provide respiratory protection against certain organic vapors or acid gases. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

Product description

NIOSH approved against certain organic vapors, acid gases and particulates.

• Cartridge or Filter Type Cartridge
• NIOSH Cartridge or Filter Assigned Color Coding, Magenta and Olive
• Gas and Vapor Protection Type, Organic Vapor, Acid Gas, Ammonia, Methylamine, Formaldehyde

Product features

3M Multi Gas/Vapor Cartridge

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

This multi gas/vapor cartridge/filter combination works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter has been assigned the color code 'Magenta/ Olive' in the NIOSH system.

Product description

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates or a variety of gases and vapors. The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this full face respirator are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Facepiece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Facepiece Reusable Respirator 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6001i, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60921i, 60922, 60923, 60924, 60925, 60926, 60928, and 60929S. Breathing hazardous particles, gases and vapors can be harmful to your health. With proper fit, use, and the appropriate cartridge/filter, the 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants (i.e., dust, mists, fumes, mold, bacteria, paints, acids, ammonia, chlorine, other chemicals, etc.). Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions.

• Enhanced Comfort: Lightweight, Well Balanced, Full Face Respirator Design and Silicone Face Seal for Enhanced Comfort and Durability
• Breathe Easier: 3M Cool Flow Valve Helps Provide Cool, Dry Comfort
• Directs Exhaled Breath Downward: Unique Center Adapter Directs Exhaled Breath and Moisture Downward
• Large Lens: Provides a Wide Field of View for Excellent Visibility. Integrated Optical Correction Limits Distortion As You Look From Left to Right
• Easy Cleaning: Smooth Surface Allows for Quick and Easy Cleaning
• Meets requirements of ANSI Z87.1 2010 for high impact (Z87+)
• Combine with 3M particulate filters or chemical cartridges to help provide respiratory protection against particulates (dust, fumes, mold, etc) and gases and vapors (paint, acid, chemicals, etc.)
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	Can same respirator be reconfigured for supplied air or filter mode (i.e. switchable) or do these 2 configurations require 2 different respirators
Answer:	im not sure I'd have to go look at box and yes it would work well with spray painting i think
Question:	Which 3M filter works best for Tear Gas
Answer:	Get the Merv13 filter sheets (available through Amazon) and cut out your own. Merv13 filters are also more efficient than cotton.
Question:	can this mask be used for fallout protection? and or chemical warfare
Answer:	I personally would not use these for sports. They are designed more for construction type projects and not sports.
Question:	I know this mask comes in 3. How do I know what size I need? What are the measurements? (please don't say Small, Medium, and Large--that means nothing
Answer:	Yes it has a filter so it should protect us from dust

Product features

Step 1

Fully loosen all four head straps. Pull hair back with one hand. Bring facepiece up to face with other hand.

Step 2

While holding the facepiece in place, pull the straps over your head.

Step 3

Tighten the two bottom straps and then tighten the two top straps.

Step 4

Make sure the back of the harness is centered on the back of the head.

Positive Pressure User Seal Check

Place the palm of your hand over the opening in the exhalation valve cover and exhale gently. If facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Particulate Filters

Place your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Cartridges

Place palms of hands to cover face of cartridge or open area of 3M Filter Retainer 501 and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Product description

3M 6001PB1-1 Organic Vapor Cartridge 2 Count

• Sold as 2/Pack.
• NIOSH approved for protection against certain organic vapors.
• Swept-back design allows an enhanced field of view and comfort.
• Bayonet compatibility allows use with many 3M half and full facepiece designs.
• Wide range of applications reduces inventory needs.

User questions & answers

Question:	Does package contain two pairs or 1 pair
Answer:	If that's about the size it looks and it's slightly bigger than a U.S. plug, then i would imagine it could fit 4-6 of them without a problem.
Question:	How long will they last before they need to be replaced
Answer:	This case will carry all your devices cables, chargers, camera memory, among other items and work great while traveling, everything in one place and the size works fine. Large enough to carry an iPod but not an iPad.
Question:	Will this filter smoke from wildfires
Answer:	everything except for the zipper, is water resistant. as long as it is not submerged, it will dry and nothing inside will be ruined. ex. if you spill something on it, no worries. if you dropped it into the sink or tub with water filled, it will damaged the contents inside... to answer your question: yes.
Question:	Does it fit any 3m mask
Answer:	This case is perfect for a 7 inch tablet and all the accessories. I use it to hold my Nexus 7, the 2013 model, in the pocket on the left; it fits perfectly even while inside the Google case. In the upper right mesh pocket I have a Zendure A5 battery and the HDMI extender for my Fire Stick. Behind the flip out portion I keep my Fire Stick and its power brick, as well as a bluetooth keyboard for the tablet. In the two zippered compartments on the flip out portion I have a three foot micro USB cable in the upper compartment, and a OTG cable and USB drive in the lower compartment. With all this, I could still fit a few more small items under the flip out portion.