11 best hard hats

Product description

3M Hard Hat H-700 Series have a tough, durable shell and adjustable suspension system that work together to help absorb the impact of small falling objects and help protect workers from bumping into fixed objects. The suspension sits lower on the head to help reduce pressure and increase security. Featuring a four-point ratchet suspension system, these hard hats are adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage. Soft brow pads cushion the forehead and are removable for easy replacement. For added versatility, the hard hat features accessory slots to accommodate 3M’s cap mounted ear-muffs, headgear, face shields, and welding helmets (all sold separately). The 3M Hard Hat is designed for industrial applications with personal protective equipment (PPE) compatibility in mind. Disclaimer:  3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.  For additional product information, visit www.3M.com.

From the Manufacturer

• REDUCES PRESSURE POINTS: 3M’s unique, lightweight shell sits lower on the head to reduce pressure points and increase security
• ADJUSTABLE COMFORT: Featuring a four-point ratchet suspension system, it is adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage
• UPWARD VISIBILITY: Reverse donning eliminates the brim and can help enhance upward visibility
• INSTALL SUSPENSION: 3M Hard Hats are shipped with suspension uninstalled to prevent distortion during shipping It must be correctly installed according to the instructions to provide maximum protection
• ANSI Z891: Meets the ANSI Z891 Class G and E for protection against electrical contact
• For industrial/occupational use only Not for consumer sale or use

User questions & answers

Question:	is both the hard hat and the ratchet suspension included
Answer:	The USB charge cord that came with my light doesn't work. It apparently has a broken wire connection in it because if I move it a little the red light appears. The slightest movement of the headlamp or cable causes the red light to go out. I'm going to try and contact Slonik and ask for a replacement cable. In the meantime I'll charge the battery using a wall outlet charger for the 18650 battery.
Question:	What is the size of the head that it fits
Answer:	Hello, I cannot find any listed for sale but you may be able to contact SLONIK and get a replacement. Maybe make your own from a thin clear cover of a welding hood or burning goggles. Good luck
Question:	Is this hard hat type1 classE
Answer:	No. Only 2 intensity levels...both lights low power and both lights high power....plus flashing mode.
Question:	are these vented
Answer:	The rechargeable 18650 rechargeable battery that comes with this is a flat top but you can use a regular raised 18650 as well. Any rechargeable 18650 will work.

Product features

STEP 1

Turn hard hat shell upside down on its crown and place the suspension in the hard hat with the brow pad towards the front brim of the hard hat

STEP 2

Fold one suspension key out and up.

STEP 3

Slide suspension key into slot as shown.

STEP 4

Press key fully into slot. Repeat for other three suspension keys.

STEP 5

Note that suspension webbing may be tight initially upon installation of the keys – push down at the center cross with your fist to ensure all clips are secured and webbing is ready to be worn.

STEP 6

Completed assembly.

Product description

Shell constructed from ABS materials. Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing Hard Hat. Soft brow pad is replaceable. Replaceable suspensions and headbands also available. Available in 4-point ratchet suspension, convertible to 6-point ratchet suspension with HP6PTSUS. Features: - ABS material: strong, yet ultra-light for seemingly weightless protection - ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing Hard Hat. - soft brow pad is replaceable - Replaceable suspensions and headbands also available. - Custom imprinting available on hard hats - 4-point suspensions can be converted to a 6-point suspension with the HP6PTSUS - Meets ANSI Z89.1-2014, Cert. Mod. - can/CSA Z94.1-15, type 1, Class E, g, and C specifications: - General dimensions: 12 13/64" X 10 5/8" X 5 63/64" - Shell thickness: 0.07" To 0.16" - Weight: 13.26 - Color: Black graphite.

• ABS
• Made in the USA or Imported
• Constructed from ABS material — Strong, yet ultra-light for seemingly weightless protection
• Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat
• Replaceable soft brow pad, suspensions and headbands also available. Provides protection at low temperatures -22°F. Provides protection at high temperatures 140°F
• 4-Point suspensions can be converted to a 6-point suspension with the HP6PTSUS
• Meets ANSI Z89.1-2009 standards, type 1, Class C, G, and E. General dimensions- 12 13/64 X 10 5/8 X 5 63/64 Inches. Shell thickness- 0.07 To 0.16 Inches

User questions & answers

Question:	Does it have a rachet head band
Answer:	Yes, both were included with our order
Question:	Is it heavy
Answer:	fit up size 9 1/2, is adjustable band.
Question:	Does the helmet pinch your hair , I've got really long hair
Answer:	Thanks for your question. Yes, this is a a Type 1, Class E Hardhat. Thanks!
Question:	Norse block head here...7- 5/8 on the heavy ...sometimes a 8...will it fit my mellon
Answer:	You won't see any visible venting because that would allow small objects access through the hard hat but it does have an air gap around the actual protective surface and the supporting webbing that's designed for airflow and it actually does help keep your head cooler

Product features

Ultimate Toughness and Comfort

The Ridgeline hard hat is the ultimate combination of high performance impact protection and exceptional personalized comfort.

High-Performance ABS

All Ridgeline hard hats are made from ABS thermoplastic resin, which combines strength and rigidity. This material is ultra-lightweight, making Ridgeline hard hats some of the lightest on the market today-up to 10 percent lighter than hard hats using traditional materials. ABS material is considered superior for its hardness, gloss, toughness, and electrical insulation properties.

Low Profile, Better Coverage

The low profile of the Ridgeline allows for a more natural, comfortable, and secure fit that sits lower on the crown of your head and provides more coverage than a higher-profile sitting hard hat.

Fully Adjustable Customized Fit

The 4-way adjustable harness points allow you to adjust the harness forward, backward, up, or down, giving you the perfect fit for customized comfort. A vented pressure pad, replaceable and washable sweatband, and the adjustable, padded swinging rear suspension provides ultimate comfort and a secure fit.

Perform at Your Peak

Pyramex safety eyewear is built for the toughest jobs with the ultimate style and comfort. All our products meet or exceed the highest industry safety standards and are independently tested.

Product description

Hardhat Skullgard Natural Tan Ratchet Fas-Trac

From the Manufacturer

Skullgard Caps feature Heavy duty construction for use in steel mills and other heavy industries where elevated temperatures are common. These hardhats are extremely comfortable and easy to wear

• Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
• ANSI/CSA Type I Compliant, Protects from vertical impacts and penetrations
• ANSI/ISEA Z89.1-2014 (Class G) Compliant, provides dielectric protection up to 2,200 volts.
• Equipped with Fast-Trac III ratchet-style suspension for easy fast size adjustment and all day comfort
• Standard Size, Fits from 6 1⁄2" to 8"
• Made in the USA
• Note: Helmet darkens over time

User questions & answers

Question:	Is helmet plastic or fiberglass
Answer:	Yes - there is a triangular knob in the back that you twist to tighten and loosen the head band. Just make sure that you have it swiveled down before tightening it (it is on a pivot).
Question:	Can i order with the fas-trac ii suspension instead of the fas-trac iii suspension
Answer:	Lighter then most hard hats I have worn. Very comfortable with the multi point adjustment. I can spend 8 hours in the hat and it does not weigh on your head.
Question:	Does this hardhat come with the suspension system or is that a separate purchase? if it does , what type
Answer:	It has an adjuster in the back for head size and it's actually on a swivel and it's the most comfortable helmet I own. Not sure if it would pinch your hair because I'm bald. But it fits very nicely.
Question:	what the material is made of
Answer:	Well cami, you should not have a problem with this hat fitting. @hardhatsforarchitects

Product features

MSA Skullgard Protective Caps & Hats

MSA has nearly a century of experience with impact and heat hazards in industrial and fire environments. MSA keeps industrial workers and firefighters safe by designing and offering superior head protection products.

Designed to offer outstanding protection in hot and dangerous industries, MSA Skullgard helmets set the standard for high temperature environments. Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350-degrees Fahrenheit.

Fas-Trac III:

No more sacrificing worker comfort for safety. For use with MSA Helmets, as specified. Flush rear lug attachments eliminate pressure points. Three levels of nape strap adjustment for customized fit. Graspable ratchet with ultra-smooth rotation and steadfast hold. The ratchet comfort pad contours to the back of the head to improve airflow and prevent hair-pulling. Use only genuine MSA replacement suspensions to help ensure compliance with the standards stated on compatible MSA helmets.

Staz-On Pinlock:

This suspension liner includes headband, nape strap, high quality sweatband, and adjustable crown straps. Users can adjust the liner for a secure and comfortable fit. A 4-point suspension system helps keep the helmet in place. The MSA Staz-On Pinlock suspension provides superior comfort, a semi-custom fit, and features nylon height adjusters. Easily clips into MSA hat or cap shells.

Swing Ratchet:

For the greatest degree of protection, a helmet should always be worn with the brim facing forward. However, for those times when you need the option of turning your helmet around, MSA’s Swing-Ratchet Suspension is the answer. Swing Ratchet Suspension size is 6-1/2-inches through 7-5/8-inches. Available as a complete system with Skullgard helmets or as a replacement part.

Protective Cap:

Protective Full Brim Hat:

Product description

Stay safe on the work site wearing this Class G DAX Hard Hat, Natural (HDF-15NG). This fiber reinforced resin hard hat features a 6-point suspension system for superior comfort and impact protection. The Clarion synthetic leather comfort dome and an oversized ratcheting fitment dial makes adjustment easy even while wearing gloves. This hard hat also features a moisture wicking foam backed microfiber liner which helps to reduce sweat build-up. Stay safe on the work site wearing this Class G DAX Hard Hat, Natural (HDF-15NG). This fiber reinforced resin hard hat features a 6-point suspension system for superior comfort and impact protection. - Comfort dome is made of perforated Clarion synthetic leather with comfort molded EVA Foam insert for additional shock absorbing protection - Fitment Dial: large oversized ratchet knob to adjust size, easy to grip and use with gloves on - Moisture wicking foam backed microfiber liner reduces sweat build-up - 6-Point Suspension System for a secure, comfortable fit - Triple reinforced crown for superior impact protection - One Dex Class G Hard Hat, Natural. Our Fiber Reinforced Hardhat Weighs in at an average 415 grams without suspension system. With suspension it weighs on an average of 475-566 grams.

• Fiber reinforced resin shell for superior impact protection
• Brim grip, exclusive design provides a secure feel
• Perforated clarion synthetic leather comfort Dome with molded EVA foam insert for additional shock absorbing protection to the top of head
• Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
• 8 point Suspension system for a secure, comfortable fit

User questions & answers

Question:	What is the total weight
Answer:	MSA calls the material Phenolic. I would say it is more like plastic than fiberglass but can handle high temperatures.
Question:	Cuanto pesa el casco. Dice que 1.6 onzas. Es eso correcto
Answer:	It appears the Fastrac II suspensions were discontinued from the factory and no longer available. The only way these come now is with the FasTrac III suspensions.
Question:	Can a headlamp be attached to this
Answer:	The Fas-Trac suspension system is included.
Question:	Does the suspension come with the hard hat or do I purchase separately
Answer:	Polly resin

Product features

DAX Full Brim Hard Hat

The DAX Hard Hat is a full brim, fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative Clarino synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.

• Fiber reinforced resin shell for superior impact protection
• Brim grip, exclusive design provides a secure feel
• Perforated Clarino synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
• Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on

Product description

MSA V-Gard Helmet, with its distinctive trademark "V" design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic "V" design has been a mainstay for many years on even the toughest worksites. The iconic "V" gives the hard hat a unique profile which enables it to deflect objects and provide added protection in the event of impact, as it increases the distance between the contact object and the head of the user. The quality and high performance of the V-Gard are 100% lot tested to ensure they meet MSA’s, and more importantly your, quality standards. Produced in 100% virgin high-density polyethylene, V-Gard is guaranteed to have the rigidity and elasticity needed to absorb impact, successfully meeting all the requirements of ANSI Z89.1 and CSA Z94.1. As well as high performance, the quality of its raw materials grants the shell a service life of up to five years. Fas-Trac III Suspension - no more pressure headaches, no more pulled hair, no more falling off and no more sacrificing worker comfort for safety. Market-leading MSA helmets now have a comfort-leading suspension! The sweatband covers forehead completely. Flush suspension tabs eliminate compression headaches. Graspable ratchet (even while wearing work gloves) with ultra-smooth rotation and steadfast hold. 3-Levels adjustable lower nape strap for balance and stability. The comfort pad provides cushioning and improved airflow.

• Polyethylene shell provides superior impact protection
• Self-adjusting crown straps ensure a comfortable fit
• Sizes: small (6 to 7-1/8-Inch); standard (6-1/2 to 8-Inch); large (7 to 8-1/2-Inch)
• Meets ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E)
• Molded and assembled in the U.S.
• Fas-Trac III suspension
• Polyethylene shell provides superior impact protection
• Self-adjusting Crown straps ensure a comfortable fit

User questions & answers

Question:	Is this made in usa or china
Answer:	They are about 17 ounces
Question:	What is the Cap front side Measures ? can we put sticker with our logo on it
Answer:	Si es super liviano y no molesta yo tengo uno y es jenial es lo mejor de lo mejor
Question:	What earmuffs can i buy for this hard hat
Answer:	It doesn't have slots for attachment so you'll have to use the usual tricks. I'd recommend "sticky-backs" (little adhesive squares you can attach zip ties too), or bend a piece of wire in an S-shape and hook the strap to the brim of the hardhat. Depends if you want it easier to remove or more permanently attached
Question:	I ordered 10 hard hats and only received 9 suspension fas-Trac's. How do I get the missing suspension fas-trac
Answer:	The suspension comes with the hardhat when purchased as new.

Product features

MSA V-Gard Protective Caps and Hats

MSA has nearly a century of experience with impact and heat hazards in industrial and fire environments. MSA helps to keep industrial workers and firefighters safe by designing and offering superior head protection products.

The MSA V-Gard Helmet, with its distinctive 'V' design, is known for comfort, quality, and durability. When you want the best comfort, quality, and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet.

Fas-Trac III:

No more sacrificing worker comfort for safety. For use with MSA Helmets. Flush rear lug attachments eliminate pressure points. Three levels of nape strap adjustment for customized fit. Graspable ratchet with ultra-smooth rotation and steadfast hold. The ratchet comfort pad contours to the back of the head to improve airflow and prevent hair-pulling. Use only genuine MSA replacement suspensions to help ensure compliance with the Standards stated on compatible MSA helmets.

Swing-Ratchet:

Swing ratchet size is 6-1⁄2-inches through 7-5⁄8-inches. Available as a complete system with V-Gard helmets or as a replacement part.

1-Touch:

Getting a better helmet fit is easier thanks to this one-handed, adjustable helmet suspension system. Features one-handed squeeze opening, slide adjustment, and snap closure. Easily adjustable suspension for a secure, comfortable fit. Adjustable dual nylon straps.

Staz-On:

This suspension liner includes headband, nape strap, high quality sweatband, and adjustable crown straps. Designed for easy clip-in to the V-Gard hat or cap shell, users can adjust the liner for a secure and comfortable fit. 4-Point suspension system helps keep helmet in place. Provides superior comfort and a semi-custom fit. Features nylon height adjusters. Easily clips into V-Gard hat or cap shell.

Cap:

Polyethylene shell provides superior impact protection. Self-adjusting crown straps ensure a comfortable fit. Slotted design works with MSA accessories. Hardhats with reverse donning logo may be worn backwards without voiding approvals.

Full Brim Helmet:

Polyethylene shell provides superior impact protection. Self-adjusting crown straps ensure a comfortable fit. Slotted design works with MSA accessories.

Product description

The DAX FIFTY50 Carbon Fiber Hardhat is a full brim, carbon fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative Clarino synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves. Each Dax hard hat carbon fiber shell is hand laid giving it a unique, one of a kind appearance. Fiber reinforced resin shell for superior impact protection Brim grip, exclusive design provides a secure feel Perforated Clarino synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on Meets ANSI Z89. 1-2014 requirements for Type 1, Class C. Moisture-wicking foam backed microfiber liner reduces sweat build-up 6 point suspension system for a secure, comfortable fit Triple reinforced crown for superior impact protection

• Carbon Fiber
• Carbon Fiber Hardhat Weighs in at 420g without suspension system. 550g with suspension
• Fiber reinforced resin shell for superior impact protection - 6 Point Suspension for Maximum Comfort
• Brim grip, exclusive design provides a secure feel - Triple Reinforced Crown For Superior Impact Protection
• Perforated Clarino synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
• Meets ANSI Z89. 1-2014 requirements for Type 1, Class C.

User questions & answers

Question:	Any recommendations for a replacement liner for this? The one that comes with it presses into sides of my forehead
Answer:	These are made in USA. Thanks again from Texas America Safety Company
Question:	Hi just wondering if you can order sweat bands separate for this product and if you have a link for them cheers
Answer:	We have had many customers put logos on the front and/ or sides of the MSA V Guard. The hat I have sitting here the logo sticker is 6" x 2.5". You really have a most of the whole hat to work with.
Question:	Where is this made
Answer:	I use a pair of MSA brand muffs designed to attach to the hard hat accessory slots. They are still in excellent shape at 5 years old with much wear and be checked in a suitcase for close to 1,000 flights.
Question:	Does this come with the suspension system
Answer:	Contact amazon

Product features

The Ultimate Safety and Durability

Safeguard yourself from mishaps with the Lift Safety DAX Fifty 50 Carbon Fiber Full Brim Hardhat that has a carbon fiber reinforced resin shell for superior impact protection and is adjustable and durable. Comfortable, lightweight and super sturdy, this hard hat by DAX is ideal to be used in and around construction sites.

Product description

The Ridgeline vented and non-vented cap style hard hats have been tested and pass for reverse orientation. This Hard Hat is made from ABS material, this thermoplastic resin is a lightweight material that combines strength and rigidity. Low profile design offers a low center of gravity for better balance. Rear padded suspension provides additional level of comfort on the wearers' neck. Vented pressure pad keeps the straps in place providing an additional level of comfort. Easy to grasp triangle knob adjusts the suspension from 6.5 to 8-inch hat sizes. Replaceable sweat band padded fabric and polyurethane foam for all day wear. 4-position harness points allows you to move the harness forward, backward, up or down-allowing for the most optimal position for ultimate comfort Non-vented meet ANSI Z89.1-2009 Standards, Type I, Class C, G and E; Vented meet ANSI Z89.1-2009 Standards, Type I, Class C; CSA Z94.1-05.

• Synthetic
• ABS material – strong, yet ultra-light for seemingly weightless protection. Vented pressure pad — Keeps the straps in place providing an additional level of comfort
• Low profile design – offers a low center of gravity for better balance. Easy to grasp knob — Adjusts the suspension from 6 1/2 to 8
• Rear padded suspension – provides additional level of comfort on the wearers’ Neck
• 4-position harness points allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort
• Replaceable sweat band – padded fabric and polyurethane foam for all day wear

User questions & answers

Question:	Can you attach 3M ear protection to the helmet
Answer:	Lift has a three pack of inserts you can also buy cloth forehead sweatband for it as well
Question:	Are these hats made to be worn with the brim in either direction
Answer:	Yes 6630 Absorbent wicked skullcap
Question:	Is this for men and women
Answer:	Sticker inside of the one I purchased read: "Shell made in China"
Question:	Does it meet osha standards and is it stamped with verification
Answer:	If your talking about the strap to your head that keeps the helmet off your head. Yes it’s comfortable and tightens with a knob on the back

Product features

Ultimate Toughness and Comfort

The Ridgeline hard hat is the ultimate combination of high performance impact protection and exceptional personalized comfort.

High-Performance ABS

All Ridgeline hard hats are made from ABS thermoplastic resin, which combines strength and rigidity. This material is ultra-lightweight, making Ridgeline hard hats some of the lightest on the market today-up to 10 percent lighter than hard hats using traditional materials. ABS material is considered superior for its hardness, gloss, toughness, and electrical insulation properties.

Low Profile, Better Coverage

The low profile of the Ridgeline allows for a more natural, comfortable, and secure fit that sits lower on the crown of your head and provides more coverage than a higher-profile sitting hard hat.

Fully Adjustable Customized Fit

The 4-way adjustable harness points allow you to adjust the harness forward, backward, up, or down, giving you the perfect fit for customized comfort. A vented pressure pad, replaceable and washable sweatband, and the adjustable, padded swinging rear suspension provides ultimate comfort and a secure fit.

Perform at Your Peak

Pyramex safety eyewear is built for the toughest jobs with the ultimate style and comfort. All our products meet or exceed the highest industry safety standards and are independently tested.

Product description

Klein Tools Hard Hats were designed and engineered for optimal safety, comfort and fit. Unique features allow the user to comfortably work in a wide variety of applications and demanding environments. Patent-pending accessory mounts on front and back ensure Klein Headlamps attach securely -- no straps needed! Hard Hat is Type 1, Class C with vents that open and close. Safety hat suspension system for optimal fit and air circulation. Large knob mechanism offers one-handed ratchet adjustment. Easy, one-handed adjustment with large knob ratchet mechanism (even with gloves on). Soft neck pad pivots to clear bandanna knots and pony tails. Universal accessory slots on both sides for attaching hearing protection, face shield and more. Includes removable Klein Headlamp/Magnetic Worklight (KHH56220) with 3xAAA batteries. Klein Rechargeable Headlamp (#56034), Alkaline Headlamp, Sweatband, Top Pad, Chin Strap and Suspension System also sold separately. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Safety hard hat has patent-pending accessory mounts on front and back that ensure Klein Headlamps attach securely and precisely, every time — no straps or zip ties needed!
• Breathable, padded sweat-wicking sweatband and top pad improve comfort and are machine washable
• Adjustable vents can be opened or closed for maximum air circulation while meeting stringent safety standards
• Unique suspension system features a flexible open frame design to provide optimal fit and improved air circulation
• Class C, Type 1 hard hat with adjustable vents meets ANSI Z89.1-2014, CSA Z94.1-15; EN397:2012+A1:2012-5.2.4 (Lateral Deformation-LD); EN12492:2012-4.2.1.2, 4.2.1.3, 4.2.1.4 (Front/Back/Side impact)

User questions & answers

Question:	No tienen en color rojo
Answer:	I am more sure.
Question:	Can you get this hard hat without the Klein Logo on the front? (or is it a sticker that can be removed
Answer:	Yes, the hat has reverse orientation ability.
Question:	Es recargable la linterna que trae el casco
Answer:	Yes
Question:	When is the full brim going to be released in blue
Answer:	Yes it does

Product features

Hard Hat, Vented Full Brim, Padded, Self-Wicking Odor-Resistant Sweatband, White

Klein Tools Hard Hats were designed and engineered for optimal safety, comfort and fit. Unique features allow the user to comfortably work in a wide variety of applications and demanding environments. Patent-pending accessory mounts on front and back ensure Klein Headlamps attach securely -- no straps or zip ties needed!

Product description

For use in steel mills and other heavy industries where elevated temperatures are common.-Testing and approvals:.-Meets or exceeds the applicable requirements for a Type 1 helmet (top impact) outlined in ANSI Z89.1 2014, Class C.. Construction: -Heavy duty construction

• Cool Air Flow /Full brim hat style will keep rain off the back of the neck

User questions & answers

Question:	Does it have a chin strap
Answer:	It is just one,
Question:	Is this msha approved
Answer:	The inner straps which sit on the head and are fastened to the inside of the hat, are ratcheted. A twist of a knob tightens or loosens the plastic straps.
Question:	How big of a head does this fit
Answer:	This is what I see on Amazon - I don't see a "20 hat" option: MSA 475369 V-Gard Hard Hat Full Brim with Ratchet Suspension, Standard, White by MSA 4.3 out of 5 stars 105 customer reviews | 22 answered questions Amazon's Choice for "msa v-gard hard hat" List Price: $30.42 Price: $20.21 ($1.01 / Hard Hats) & FREE Shipping You Save: $10.21 (34%) Note: Not eligible for Amazon Prime. Available with free Prime shipping from other sellers on Amazon.
Question:	I bought this hard hat a little over a year ago but the inner banding is breaking.. how can I replace the inner banding? Love the hard hat
Answer:	Never experienced that proble and have been around many big men.
Question:	is the price for one or
Answer:	No
Question:	Do you have the large size hard hats available
Answer:	Look up skullerz hard hats with light same exact hard hat and light without Klein on it
Question:	Does this come in a pack of 20? It does not state anywhere except that they are $16.56/hard hat, so I'm assuming 20 come in this order
Answer:	No
Question:	The standard shell size in medium. I have a larger than standard head. Im looking for a "large" shell. The medium lands on the back of my skull
Answer:	NA

Product features

The Hard Hat with the Iconic “V”

MSA V-Gard hard hat, with its distinctive trademarked 'V' design, is known for comfort, quality, and durability. Put to the test in some of the most extreme environments, the V-Gard has become a mainstay on even the toughest worksites, helping protect workers around the world - day in and day out.

Unsurpassed Comfort and Fit

MSA Fas-Trac III Suspension:

Sweatband fully covers the headband and worker’s forehead.

Three levels of nape strap adjustment for customized fit.

Lower nape strap cradles the head. Retention is greatly improved— even when bending over.

Smooth ratchet rotation and secure hold.

Custom Hard Hats

Make it yours - MSA offers a wide variety of colors, sizes, and logo options to meet your style needs.

Complete Safety Solution

Slotted V-Gard accessory system allows for the integration of hundreds of MSA hard hat accessories with one quick click! This includes hearing protection, visors, faceshield, welding shields, chin straps and lighting.

Product description

Hardcap Skullgard Natural Tan Fas-Trac Suspsension

From the Manufacturer

Skullgard Caps feature Heavy duty construction for use in steel mills and other heavy industries where elevated temperatures are common. These hardhats are extremely comfortable and easy to wear

• Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
• ANSI/CSA Type I Compliant, Protects from vertical impacts and penetrations
• ANSI/ISEA Z89.1-2014 (Class G) Compliant, provides dielectric protection up to 2,200 volts.
• Equipped with Fast-Trac III ratchet-style suspension for easy fast size adjustment and all day comfort
• Standard Size, Fits from 6 1⁄2" to 8"

User questions & answers

Question:	Does this actually come with the headgear? I see some reviews saying they did not get one with the hardhat
Answer:	The one I just received had a chin strap
Question:	is this hat size 6/ 1/2 to
Answer:	yes if the insert states that
Question:	Does the hard hat look like the guy wearing it or darker like the photo of it by itself
Answer:	These go up to 24.8 inches max.
Question:	Is this front brim or full brim? Answer the question if you purchased directly from Amazon... not from another seller
Answer:	Unfortunately there are no replacement inserts made yet for these hard hats.

Product features

MSA Skullgard Protective Caps & Hats

MSA has nearly a century of experience with impact and heat hazards in industrial and fire environments. MSA keeps industrial workers and firefighters safe by designing and offering superior head protection products.

Designed to offer outstanding protection in hot and dangerous industries, MSA Skullgard helmets set the standard for high temperature environments. Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350-degrees Fahrenheit.

Fas-Trac III:

No more sacrificing worker comfort for safety. For use with MSA Helmets, as specified. Flush rear lug attachments eliminate pressure points. Three levels of nape strap adjustment for customized fit. Graspable ratchet with ultra-smooth rotation and steadfast hold. The ratchet comfort pad contours to the back of the head to improve airflow and prevent hair-pulling. Use only genuine MSA replacement suspensions to help ensure compliance with the standards stated on compatible MSA helmets.

Staz-On Pinlock:

This suspension liner includes headband, nape strap, high quality sweatband, and adjustable crown straps. Users can adjust the liner for a secure and comfortable fit. A 4-point suspension system helps keep the helmet in place. The MSA Staz-On Pinlock suspension provides superior comfort, a semi-custom fit, and features nylon height adjusters. Easily clips into MSA hat or cap shells.

Swing Ratchet:

For the greatest degree of protection, a helmet should always be worn with the brim facing forward. However, for those times when you need the option of turning your helmet around, MSA’s Swing-Ratchet Suspension is the answer. Swing Ratchet Suspension size is 6-1/2-inches through 7-5/8-inches. Available as a complete system with Skullgard helmets or as a replacement part.

Protective Cap:

Protective Full Brim Hat:

Product description

For use in steel mills and other heavy industries where elevated temperatures are common.-Testing and approvals:.-Meets or exceeds the applicable requirements for a Type 1 helmet (top impact) outlined in ANSI Z89.1 2014, Class C.. Construction: -Heavy duty construction

• Cool Air Flow /Full brim hat style will keep rain off the back of the neck
• Equipped with Fast-trac ratchet-style suspension for easy fast size adjustment
• ANSI Z89.1 2016 / Attractive Black with Silver Stripes color
• TYPE 1, CLASS C / Meets all requirements for type 1 top impact helmet
• Fits SIZES: 20.47"-24.8"