13 best shock lanyards
Shock lanyards, often referred to as shock-absorbing lanyards, are essential components of fall protection systems and personal protective equipment (PPE) used in various industries, including construction, maintenance, and industrial work. Here's what you need to know about shock lanyards:
1. Purpose: Shock lanyards are designed to protect workers from serious injury or fatalities in the event of a fall. They are a crucial part of fall arrest systems, helping to reduce the impact force on a worker's body during a fall.
2. Construction: A shock lanyard typically consists of a flexible, durable strap (usually made of nylon or polyester) with a shock-absorbing element built into it. This shock-absorbing element is often made of materials like webbing, rope, or tear-resistant fabric designed to deform and elongate, absorbing energy during a fall.
3. Connectors: Shock lanyards have connectors on both ends. One end attaches to the worker's harness, typically at the dorsal D-ring, while the other end connects to an anchor point or a lifeline.
4. Function: In the event of a fall, the shock-absorbing element of the lanyard deploys, extending and absorbing the energy generated during the fall. This extension helps reduce the impact force exerted on the worker's body and prevents injury.
5.Length Options: Shock lanyards come in various lengths to accommodate different work environments and fall distances. It's essential to choose the appropriate length based on the specific task and fall clearance requirements.
6. Inspection and Maintenance: Like all PPE, shock lanyards should be regularly inspected for signs of wear and damage. Damaged lanyards should be immediately removed from service and replaced. Routine maintenance and inspection are critical to ensure the lanyards remain effective and safe.
7. Regulations: The use of shock lanyards is subject to safety regulations and guidelines in most industries. Employers are responsible for providing proper fall protection equipment, including shock lanyards, and ensuring their employees are trained in their use.
8. Compatibility: When selecting a shock lanyard, it's important to consider compatibility with other fall protection equipment, including harnesses, anchorage points, and connecting hardware. Compatibility ensures the entire system works seamlessly in the event of a fall.
Shock lanyards are a crucial component of fall protection systems, helping to prevent injuries and save lives in high-risk work environments where the potential for falls exists. Workers should be trained in the proper use and care of shock lanyards to ensure their safety while working at heights.
Below you can find our editor's choice of the best shock lanyards on the market
KwikSafety (Charlotte, NC) Rattler 1 Pack (Internal Shock Absorber) Single Leg 6ft Safety Lanyard OSHA ANSI Fall Arrest Protection Equipment Snap Hooks Construction Arborist Roofing
KwikSafety
- INTERNAL SHOCK ABSORBER – The RATTLER is a single leg safety lanyard with 100% polyester tubular yellow webbing. This sleek and lightweight fall protection device has an internal shock absorber that provides safety from the inside out, eliminating the need for a bulky shock pack. The integrated energy absorber has a maximum deployment distance of 48 inches (1.2 meters), an average arresting force of 900 lbs., and comes with a fall arrest indicator tag that breaks in the event of a fall.
- 2 SNAP HOOKS AND SAFETY LABELS – The KwikSafety DOUBLE RATTLER fall arrest lanyard comes with two self-locking snap hook connectors ANSI tested to a tensile strength of 5,000 lbs. and gate strength of 3,600 lbs. All snap hooks on the lanyard are compatible with full safety harnesses with D-Rings and anchor points as part of your personal fall arrest system. Stay informed about your lanyard with the safety and warning labels located inside the heavy duty protective label cover.
- ANSI TESTED BY 3RD PARTY (Unique to KwikSafety Products) – This safety positioning lanyard (as well as KwikSafety’s other fall protection safety lanyards) is quality checked and tested by a 3rd party accredited testing lab and is in full compliance with ANSI/ASSE Z359.13-2013. The double locking, yellow zinc anodized steel snap hooks are compliant with ANSI.Z359.12 standards. KwikSafety gets all of their products ANSI tested while majority of other safety companies do not and its buyers beware.
- OSHA COMPLIANT (Keep OSHA on Your Side) - Ideal for any project where OSHA compliance is required. Can be used for climbing on a roof or ladder, construction, gutter cleaning, installation, steep roofs, inspection, maintenance, emergency rescue, wind turbines, communication towers, water tanks, wells, ship yards, rigging, window washing. Used by iron & steel workers, roofers, linemen, engineers, inspectors, supervisors, technicians, industrial painter.
- FALL PROTECTION GUARDIAN – With RATTLER, you’ll want to conquer heights as tall as the peak of Malta! KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Espanol (cordón de seguridad, cordón de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality.
User questions & answers
| Question: | it is 6 feet fully extended. how long is it when not extended |
| Answer: | It is fully extended but if you fall it is extended 2 more feet. I hope this helps you . It is a great . |
| Question: | Where is it made |
| Answer: | Good morning Larry, Thank you for your interest in our products! Our products are designed, assembled, and packed in the USA and are made with international materials. If you have any other questions or concerns, please let me know! Best Regards, KwikSafety Team |
| Question: | If I had two of these hooked to a kids harness from the ceiling would it be stretchy and bouncy? Using it for gymnastics purposes |
| Answer: | No. The only thing bouncing will be the kids off the floor. |
| Question: | Because this is an elastic fall arrester does that mean if you fall once it will return to original and can be used again |
| Answer: | If you fall in it there no good after a fall |
AFP 6 FT Double Leg Internal Shock Absorbing Safety Lanyard with Dual Rebar Hooks and Snap Hook
- webbing
- ✅SAFE: The AFP 6 FT Double Leg Internal Shock Absorbing Lanyard is made with a lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with three substantially secure heavy-duty double-locking gates.
- ✅DURABLE: The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
- ✅CONVENIENT: Our most popular 2-in-1 fall arrest single lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
- ✅COMPLIANT: Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
- ✅SERVICE: AFP products are proudly designed & shipped from Miami, FL, USA. Our Miami-based team will quickly answer any and all of your questions and concerns about your order in English
6 FT Single Leg Internal Shock Absorbing Safety Lanyard with Dual Snap Hooks
AFP
- ✅SAFE: The AFP 6 FT Single Leg Internal Shock Absorbing Lanyard is made with a lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy-duty double-locking gates.
- ✅DURABLE: The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
- ✅CONVENIENT: Our most popular 2-in-1 fall arrest single lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
- ✅COMPLIANT: Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
- ✅SERVICE: AFP products are proudly designed & shipped from Miami, FL, USA. Our Miami-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, “Se habla Espanol.” AFP products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
User questions & answers
| Question: | Max weight load |
| Answer: | Says 5000lbs |
Guardian Fall Protection 01214 3-Foot Single Leg Shock Absorbing Lanyard
Guardian Fall Protection
Product description
The Guardian Fall Protection "Shock Absorbing Lanyards" are designed with 1-Inch nylon webbing which is both light and durable. This product provides a clear shock absorber pack for easy inspection. This particular lanyard offers an easy to use self double locking snap hooks.
- Nylon webbing is light and durable
- Clear shock absorber pack for easy inspection
- Easy to use self double locking snap hooks
- 3 feet in length
- Single leg shock absorbing lanyard
User questions & answers
| Question: | is this for one bucket, two man operation |
| Answer: | This is for 100% tie-off for one person. |
| Question: | What is this rated for |
| Answer: | According to the manufacturer it is suitable for 130 lbs. up to 310 lbs |
| Question: | I cant belive they dont even put the stretched out distance ? What is it does anyone know |
| Answer: | It will stretch out to 6 feet |
| Question: | The shock absorbing part of the Lanyard is encased in thick plastic shrink wrap, do I need to remove this, or does it stay |
| Answer: | the cover on mine stays on, ;you can tell that mine does not come off unless you fall, the systme is it will rip threads to slow you down until the end. I always hope it would work when or if i need it. |
WELKFORDER Double Leg 6-Foot Fall Protection Internal Shock Absorbing Stretchable Safety Lanyard with Snap & Rebar Hook Connectors ANSI Compliant
WELKFORDER
Product description
- WELKFORDER WFL022 Double Leg 6-Foot Fall Protection Internal Shock Absorbing Stretchable Lanyard is designed for minimizing the consequences of a fall form a height, by mean of built in deceleration system.
- The Snap hook must be connected to the dorsal D-ring of the full body harness. The Rebar Hooks are to be connected to the anchorage connector.
- If the item or style cannot fulfill your satisfaction, we offer Free Returns within 30 days! Besides, we will provide you professional customer service related to all your questions of our products.
- WELKFORDER WFL022 Double Leg 6-Foot Fall Protection Internal Shock Absorber Stretchable Lanyards have the fully passed test report performed at authoritative laboratory in accordance with ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc.
- The Internal Shock Absorbers are designed for up to 6-foot free fall applications with a maximum capacity up to 310 lb. (141 kg) including clothing, tools, etc. with a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs. Statically tested with a minimum breaking strength more than 5,000 pounds (22.2 kN).
- The External Tubular webbing is made of 100% polyester Heavy Duty construction materials provides maximum security with breaking strength: 5000lbs. Stretchable internal elastic makes a prominent working condition. Applied with Anti-abrasive Hollow Webbing for protecting every connecting ends from abrasion.
- Snap & Rebar Hooks used on WELKFORDER Shock Absorber Stretchable Lanyard marked with the “ANSI Z359.12” standard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. The Snap hook should be connected to the dorsal D-ring of the full body harness as a part of a personal fall arrest system.
- WELKFORDER Fall protection equipment must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
User questions & answers
| Question: | Is it nsf certified |
| Answer: | Yes, these come with the plastic ID sleeves as indicated in the photo. |
YaeCCC Single Leg Stretch Lanyard Fall Arrest Safety Harness Shock Resistant Energy Absorption Lanyard with Snap Hook Connector
Yae First Trading Co.,Itd
Product description
6FT Internal Shock Absorbing Lanyard with Snap Hook Connector is designed for minimizing the consequences of a fall form a height, by mean of built in deceleration system.
The Internal Shock Absorbing Lanyard requires space for up to 6feet ( 1.8m ) of free fall with a maximum capacity up to 100kg including clothing, tools, etc.
The snap hook must be connected to the dorsal D-ring of the full body harness. The opposite snap hook is to be connected to the anchorage connector.
Specification of Energy Absorbing Bag:
1. Overall static load: ≥ 16 KN
2. Accidental opening tension: > 2 KN
3. Impact after abosrption: < 6 KN
4. Extended length: 1.5 meters
5. Safety space: > 6 meters
For your safety:
If an energy absorbing lanyard is used in conjunction with a cross-arm anchorage connector, other anchorage extension, vertical lifeline, or horizontal lifeline, the additional length of the anchorage connector, or sag from the lifeline must be taken into consideration during the clearance calculation process.
Never attach the unused leg of the lanyard back to the Full Body Harness at any location other than an approved lanyard storage keeper.
Package includes:
Energy Absorption Lanyard with Snap Hook Connector
- Comes with one snap hook, one rebar scaffolding hooks and integrated energy absorption. Quick-Lock ring connector to clip onto the harness.
- Energy absorption lanyards system with 30mm Polymide webbing and PVC container case reduces the force of impact during fall.
- One large eye connectors (2 Inch), with body safety rope for structure anchoring, 6ft overall length.
- This safety harness lanyard ideal for roofing climbing hunting ladder and construction job.
- CE certificated. Particularly sturdy elastic webbing eases the movement of operators due to its small size.
Seculok 6ft Webbing Lanyard with Shock Absorber, 1 Carabiner and 2 Scaffold Hooks
SECULOK
Product description
Seculok Double Leg 6-Foot Fall Protection Shock Absorber Lanyard is designed for minimizing the consequences of a fall form a height, by mean of built in deceleration system. The carabiner hook must be connected to the dorsal D-ring of the full body harness. The Rebar Hooks are to be connected to the anchorage connector.
- Seculok Double Leg 6-Foot Fall Protection Shock Absorber Lanyard have the fully passed test report performed at authoritative laboratory in accordance with ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc.
- The Shock Absorbers are designed for up to 6-foot free fall applications with a maximum capacity up to 310 lb. (141 kg) including clothing, tools, etc. with a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs. Statically tested with a minimum breaking strength more than 5,000 pounds (22.2 kN).
- Snap & Rebar Hooks used on Seculok Double Leg 6-Foot Fall Protection Shock Absorber Lanyard marked with the “ANSI Z359.12” standard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. The Snap hook hould be connected to the dorsal D-ring of the full body harness as a part of a personal fall arrest system
- The Shock Absorber lanyard's webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged. All Snap & Rebar Hooks on product must be able to self-close and lock.
WELKFORDER Single Leg 6-Foot Fall Protection for Construction Shock Absorber Stretch Safety Lanyard with Snap & Rebar Hook Connectors ANSI Z359.13-2013 Complaint
Product description
- WELKFORDER WFL011 Single Leg 6-Foot Fall Protection Shock Absorber Stretchable Lanyard is designed for minimizing the consequences of a fall form a height, by mean of built in deceleration system.
- The Snap hook must be connected to the dorsal D-ring of the full body harness. The Rebar Hooks are to be connected to the anchorage connector.
- If the item or style cannot fulfill your satisfaction, we offer Free Returns within 30 days! Besides, we will provide you professional customer service related to all your questions of our products.
- WELKFORDER WFL011 Single Leg 6-Foot Fall Protection Shock Absorber Stretchable Lanyards have the fully passed test report performed at authoritative laboratory in accordance with ANSI Z359.13-2013. For all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). General Size great for construction workers, carpenters, painters, roofers, tower climbers, window cleaners etc.
- The Shock Absorbers are designed for up to 6-foot free fall applications with a maximum capacity up to 310 lb. (141 kg) including clothing, tools, etc. with a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs. Statically tested with a minimum breaking strength more than 5,000 pounds (22.2 kN).
- The External Tubular webbing is made of 100% polyester Heavy Duty construction materials provides maximum security with breaking strength: 5000lbs. Stretchable internal elastic makes a prominent working condition. Applied with Anti-abrasive Hollow Webbing for protecting every connecting ends from abrasion.
- Snap & Rebar Hooks used on WELKFORDER Shock Absorber Stretchable Lanyard marked with the “ANSI Z359.12” standard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. The Snap hook hould be connected to the dorsal D-ring of the full body harness as a part of a personal fall arrest system.
- The Shock Absorber lanyard's webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged. All Snap & Rebar Hooks on product must be able to self-close and lock.
User questions & answers
| Question: | Are you supposed to take the little clear plastic part off |
| Answer: | No , that plastic part breaks only if you fall hard |
| Question: | Is the belt reusable after a fall, or does it have to be replaced |
| Answer: | No.safety lanyard have to be replaced. |
Guardian Fall Protection 01255 3-Foot Single Leg Non-Shock Absorbing Lanyard
Guardian Fall Protection
Product description
The Guardian Fall Protection "Non-Shock Absorbing Lanyards" are used for positioning and restraint only. The lanyard is constructed from durable nylon and allows workers to attach to an anchorage point or system with enough length to safely complete the job.
- For positioning and restraint only
- Durable Nylon
- Allows workers to attach to an anchorage point or system with enough length to safely complete the job
- 3 feet in length
- Single leg lanyard
User questions & answers
| Question: | Guardian Fall Protection 01270 6-Foot Double Leg Non-Shock Absorbing Lanyard picture is a single leg, what gives |
| Answer: | Mine turned off by pressing the button again, maybe yours is defected? |
| Question: | Would like to know inside diameter of safety hook, and also actual length of strap only |
| Answer: | lanyard wide 0.6 inchs.(15MM) |
| Question: | is this osha approved |
| Answer: | yes |
| Question: | Could this be used with a guardian shock absorbing poly steel rope? Would it hold up because the rope is shock absorbing- if I fell |
| Answer: | Hello The Badge Holder is 4.5 x 2.7 inches, fits 3.5 x 2.3 card insert. If your size is within this range, it's OK. |
Guardian Fall Protection 11203 IS-72-2R 6-Foot Double Leg Internal Shock Lanyard with Rebar Hook
Guardian Fall Protection
Product description
The Guardian Fall Protection "Internal Shock Lanyard" is made with heavy duty outer polyester webbing and a polyester core specifically sewn in to reduce impact forces. This lanyard does not stretch and has no shock pack, so it is lightweight as well.
- Made with a heavy duty outer polyester webbing and a polyester core specially sewn in to reduce impact forces
- Lightweight
- Rebar hook included
- 6 feet in length
- Double leg lanyard
User questions & answers
| Question: | Im 5-9 will this fit fine |
| Answer: | Yes, you can place regular size straws in the pockets. They may need to be trimmed a bit. In my opinion, coffee stirrers work the best. |
| Question: | Does it have an ansi or osha rating or approval |
| Answer: | I believe it would. There's a breakaway release at the top of the neck. My husband used to work in corrections. He thinks it would break away if someone grabbed the lanyard from the front but may not release if they grab it from the back. More likely they would grab the front where your name badge is, though. |
| Question: | Will this work for a safety teather on a sail boat |
| Answer: | It comes with 2 CR2016 batteries included. |
| Question: | how many pounds can it support |
| Answer: | I'm not sure where it's made but I absolutely love it. It is a very, very good quality. |
Malta Dynamics 4.5' to 6' Fall Protection Double Leg Stretch Internal Shock Absorbing Lanyard with One Steel Snap Hook and Two Rebar Hooks, OSHA/ANSI Compliant
- SAFE: This safety lanyard model meets the strict requirements of the American National Standards Institute (ANSI Z359.13-2009 and ANSI A10.32-12). It is also in compliance with the Occupational Safety and Health Administration (OSHA 1926 Subpart M and OSHA 1910). In addition to meeting these safety requirements, it is also completely ISO 17025 third-party tested as per the protocols set out by ANSI for testing.
- DURABLE: Our fall protection kit boasts an ANSI capacity range of 130 - 310 pounds, so you concentrate on the job at hand thanks to the one-inch polyester webbing and alloy steel that have been used.
- USER-FRIENDLY DESIGN: As the shock absorption is built directly into the lanyard, this safety harness kit is really a great lightweight solution. This safety lanyard has been designed so that the risk of tripping or catching on nearby parts of machinery gets minimized. This makes it a must-have item if you are working on construction or industrial sites.
User questions & answers
| Question: | What is the maximum stretch length during a fall |
| Answer: | 4 inches |
| Question: | Ares this hooks bid enough to hook to a 2x4 roof truss |
| Answer: | Yes. The pocket chart comes with numbers. |
| Question: | What is the country of manufacture |
| Answer: | Yes, the pockets can fit 100 straws. |
| Question: | is this tether acceptable for ORC (offshore racing congress). That is, can it be used on a sailboat sailing offshore |
| Answer: | I believe there were about 200 straws. We added one straw for each day of the school year, and there were enough straws included for that. |
KwikSafety (Charlotte, NC) Python 2 Pack (External Shock Absorber) Double Leg 6ft Safety Lanyard OSHA ANSI Fall Protection Restraint Equipment Snap Rebar Hook Connectors Construction Arborist Roofing
KwikSafety
Product description
The KwikSafety Double Leg Shock Absorber Safety Lanyard equipped with Snap Hook will keep you safe when you are at your job working at extreme heights or doing a risky activity such as climbing that requires Fall Protection. This tactical lanyard is designed to reduce the risk of falling and slipping. You can easily maneuver around obstacles and obstructions while remaining attached. The Highly Visible Yellow Polyester material is noticeable in direct sunlight, foggy, dusty and dim-light conditions that improves visibility to prevent injury to those who wear it and the Double Locking ANSI Snap Hooks are user friendly. It’s the ideal Safety Equipment and versatile fall protection device for construction, welding, roofing, logging, arborists, climbing, emergency and rescue services, and other utility jobs. At KwikSafety, we take pride and care on craftsmanship with a critical eye to your safety. Our Fall Protection Safety Lanyard is Government Approved, DOD approved, airport and port approved as well as RapidGate and TWIC approved. Meets or exceeds all applicable industry safety standards including OSHA and ANSI. If you ordered the wrong item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!
- WHO – “We Don’t Cut Corners on Safety” | The KwikSafety PYTHON is a double leg, heavy duty, high performance safety lanyard that meets and exceeds the standards of ANSI Z359.13-2013. Be seen and be safe with the fluorescent yellow 1 inch wide polyester webbing. Use with any compatible fall protection safety harness, free fall (FF) lanyards, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the PYTHON fall protection lanyard has your back!
- WHAT – “All the Safety Bells and Whistles” | The self-locking rebar and snap hooks meet ANSI Z359.12 and CSA Z259.12 standards and have a tensile strength of 5,000lbs and gate strength of 3,600lbs. Both hooks (2 rebar, 1 snap) allow for ease of use around construction site scaffolding, I-beams, and concrete structures. Expandable webbing allows for a maximum deployment distance of 48 inches (1.2 meters). User weight capacity ranges from 130-310lbs (includes worker weight, clothing, and tools).
- WHEN – “To Make a Long Safety Story Short” | The 6 foot (1.8 meters) PYTHON safety lanyard comes completely equipped with an external shock absorbing pack that deploys in the event of a fall to reduce impact forces and acceleration to minimize injury. Average arresting force is 900lbs (4kN). If the shock absorber has been deployed or compromised in any event, it is no longer in working condition and can lead to injury and OSHA citation if use is continued.
- WHERE – “Spill the Safety Beans” | Use the KwikSafety PYTHON positioning lanyard in wet, dry, hot, or cold weather thanks to the high tensile strength and top quality static and dynamic performance. Make the PYTHON a part of your Industrial Safety PPE (personal protection equipment) for jobs/workplaces such as arborists, roofing, climbing, logging, inspection, emergency and rescue services, military, gutter cleaning, and other professional workplaces.
- WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (cordón de seguridad, cordón de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
User questions & answers
| Question: | What are the two black small round objects in thhe upper right of the main image showing all of the products sold?.. Cant seem to find them describe |
| Answer: | The cards are either light plastic or laminated. They do not seem like they will rip "easily", I am sure you could if you tried, but I have had no problem. Will it slip on table? Not sure what you are asking, it will sit on the table the sides fold out into a triangle, but you can push it around. It just sits there. Eash side goes up to 99, one red, one black. |
| Question: | How far do the actually stretch when being attached to something |
| Answer: | 11 in each stack with a total of 44 |
| Question: | Are these osha compliant |
| Answer: | 0-9 in each of the 4 positions, so technically 40. So you can score up to 99-99 |
| Question: | So the stretch goes from 4 to 6 ft at maximum and the Activated shock absorber goes a maximum of 4 ft. how is the total fall 18 ft |
| Answer: | About 2 maybe 3 inches.... DO NOT GET WET |
WELKFORDER Double Leg 6-Foot Safety Lanyard For Consturction Shock Absorber Stretchable Lanyard with Snap & Rebar Hook Connectors ANSI Z359.13-2013 Complaint
WELKFORDER
Product description
- WELKFORDER WFL012 Double Leg 6-Foot Fall Protection Shock Absorber Stretchable Lanyard is designed for minimizing the consequences of a fall form a height, by mean of built in deceleration system.
- The Snap hook must be connected to the dorsal D-ring of the full body harness. The Rebar Hooks are to be connected to the anchorage connector.
- If the item or style cannot fulfill your satisfaction, we offer Free Returns within 30 days! Besides, we will provide you professional customer service related to all your questions of our products.
- WELKFORDER WFL012 Double Leg 6-Foot Fall Protection Shock Absorber Stretchable Lanyards have the fully passed test report performed at authoritative laboratory in accordance with ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc.
- The Shock Absorbers are designed for up to 6-foot free fall applications with a maximum capacity up to 310 lb. (141 kg) including clothing, tools, etc. with a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs. Statically tested with a minimum breaking strength more than 5,000 pounds (22.2 kN).
- The External Tubular webbing is made of 100% polyester Heavy Duty construction materials provides maximum security with breaking strength: 5000lbs. Stretchable internal elastic makes a prominent working condition. Applied with Anti-abrasive Hollow Webbing for protecting every connecting ends from abrasion.
- Snap & Rebar Hooks used on WELKFORDER Shock Absorber Stretchable Lanyard marked with the “ANSI Z359.12” standard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. The Snap hook hould be connected to the dorsal D-ring of the full body harness as a part of a personal fall arrest system.
- The Shock Absorber lanyard's webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged. All Snap & Rebar Hooks on product must be able to self-close and lock.
User questions & answers
| Question: | What is the country of manufacturing |
| Answer: | sorry, but it’s easy to identify, because it got 2 colors, so you can clearly which side is HOME & VISITORS. |
Latest Reviews
View all
Kate Spade New York Jewelry Designers
- Updated: 07.04.2023
- Read reviews
Rv Vacuums
- Updated: 02.03.2023
- Read reviews
Colloidal Silver Generators
- Updated: 23.01.2023
- Read reviews
Bissell Carpet And Upholstery Cleaners
- Updated: 19.06.2023
- Read reviews
12 Volt Fan For Rv
- Updated: 02.01.2023
- Read reviews