9 best safety harness for construction

• FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
• GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
• WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
• PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
• OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.

User questions & answers

Question:	What is the fall distance to full arrest? Some are a far as 18 feet
Answer:	The fall distance is dependant on the length of the lanyard you select.
Question:	This company has a lot of confusing listings. A size chart is provied, so which of the four sizes is this listing
Answer:	Good morning Denver, I apologize for that confusion! Our harnesses are all one-size-fits-most, so that size chart is supposed to represent the range of sizes that this harness will fit. Best Regards, KwikSafety
Question:	son certificados
Answer:	Yes, i brought one and show to my contractor, I used with out problems
Question:	is single dorsal ring lanyard connects to steel or plastic
Answer:	Hello Customer, Thank you for your question. The single dorsal ring that the lanyard is connected to is made of high quality steel, ensuring your safety while using our SCORPION harness . If you have any additional questions or concerns, please do not hesitate to contact us. Best Regards, KwikSafety

Product description

Why is Fall Protection important for your business?



Falls are among the most common causes of serious work related injuries and deaths. Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls.



If working at height over 6ft is your daily work or next work project, you have to face these risks and it would be unwise to do so without proper precautions. Fortunately, we offer a great fall arrest safety harness that covers your bases for this type of work.



Keep yourself protected while you work with the Palmer Safety Fall Protection Universal Body Harness w/ Shock Absorbing Lanyard Kit!



The fall protection body harness has 3 easily accessible adjustment points to ensure a comfortable fit a wide range of body types properly and safely. The dorsal D-ring for fall arrest with pass-through leg straps and is compatible for a quick and safe connection with any manufacturer’s ANSI compliant fall protection equipment



We’ve designed our fall arrest safety harnesses kit to meet OSHA standards so you can work with the right kind of protection. The kit also meets or exceeds the rigorous ANSI/ASSE Z359.11-2014. A10.32-2012 & Z359.13-2013 fall protection requirements.



Dive deeper into the details of our fall arrest safety harness kit:



✅ 3 point adjustment harness, dorsal D-ring

✅ Pass-through legs buckles

✅ Fall Indicators

✅ 6’ single leg lanyard

✅ Yellow webbing with galvanized steel snap hook

✅ Personal shock absorber with 5,000 static strength



Put safety on top of your agendas. Add the Palmer Safety Fall Protection Full Body Safety Harness Kit to your cart today!

• 🧰 WORK SAFELY - Palmer Safety Harnesses are designed and tested to comply with applicable OSHA and ANSI standards for fall protection equipment. When used as a component in a personal fall arrest system, or a personal restraint system, the Palmer Safety harnesses provide workers with the full body harness system designed to allow the body to help absorb the impacts of a fall should one occur.
• 🧰 ADJUST WITH EASE - The fall protection body harness has 3 easily accessible adjustment points to ensure a comfortable fit a wide range of body types properly and safely. The dorsal D-ring for fall arrest with buckle leg straps and is compatible for a quick and safe connection with any manufacturer’s ANSI compliant fall protection equipment. Palmer Safety Full Body Safety Harness are designed for use by person with a combined Weight (clothing, tools, etc.) of 130 – 310 lbs. (59 – 140 kg)
• 🧰 RELIABLY DURABLE - We provide fall protection gear that is built to last and can keep you out of harm’s way. The 6’ lanyard with personal absorber has these physical parameter: Webbing: Polyester, Width: 0.98 in, Breaking Strength: 6000 lbs., Stitching Thread: High-tenacity polyester | Metal Component: Alloy Steel, Finish: Silver or yellow golden galvanized | Weight: 2.72 lbs
• 🧰 COMPLIANT WITH SAFETY STANDARDS - We take working environment safety very seriously. That’s why our fall protection fall arrest kit complies with OSHA standards as well as meet in some cases exceed ANSI/ASSE Z359.11-2014. A10.32-2012 & Z359.13-2013 fall protection requirements. It’s a must-have for safe and fully-compliant work operations in Ports, Highways, Government buildings, Military Installations, Residential & Commercial Construction, Roofing.
• 🧰 WHY PLANK SUPPLY – We provides our customers with the tools and materials needed to complete their project safely and affordably. We focus on servicing the industrial and residential contractors to the weekend DIY warrior with our brand ATERET in rope, personal protective equipment and fall protection. Customer service and satisfaction is the key to our success by quickly delivering great products at affordable prices

User questions & answers

Question:	Will this fit a smaller guy 5'5 170lbs
Answer:	The shirts did not shrink very much after washing repeatedly. They are sized on the large side, I bought a medium instead of a large.

Product description

Got some roofing work to take care of?



Everybody needs a roof above their heads. But working on roofs is no walk in the park. It’s outright one of the most dangerous jobs in the United States, with falls, slips, and trips as the primary cause for injury or death.



If roofing is your trade or your next project, you must face these risks. And it would be unwise to do so without proper precautions. Fortunately, we offer a great safety kit that covers your bases for this type of work.



Keep yourself protected while you work with the Plank Supply Fall Protection Emergency Roofing Bucket Kit!



Universal Full Body Harness with 5 points adjustment & pass-through legs strap. The harness is designed to carry a combined weight of 130 to 310lbs or 59 to 140kg.



Also, part of the kit is a 50ft long vertical lifeline rope that comes with one locking steel snap hook. Spliced on one end is a snaphook, while the rope is 5/8” thick twisted polyester with a removable rope grab and attached personal shock absorbing lanyard. We are also adding a reusable roof anchor made of galvanized steel with stamped D-ring. Fix this on wooden/metal beams to secure.



We’ve designed our product to meet OSHA standards so you can work with the right kind of protection. The bucket kit also meets or exceeds ANSI Z359.11-2014, Z359.18-2017, Z359.15-2014, and Z359.13-2013.



Dive deeper into the details of our Roofer Kit:



✅ Universal Full Body Harness with 5 points adjustment & pass-through legs straps

✅ 50 foot Vertical Lifeline Assembly with Personal Shock Absorbing Lanyard

✅ Heavy Duty Reusable Roof Anchor with 5,000 breaking strength of 5,000 lbs

✅ 4 gallons white bucket to store all the equipment



Put safety on top of your agendas. Add the Palmer Safety Fall Protection Roofing Bucket Kit

• 🧰 WORK SAFELY – Safely handle roofing work with this essential protection package! Our kit includes a universal full body 5 point safety harness, a reusable roof anchor, a 50 foot vertical lifeline rope with rope grab and attached personal shock absorbing lanyard plus a storage bucket to protect the kit. The Palmer Safety Roofing Bucket Kit is ideal for both residential and commercial roofers and all construction workers
• 🧰 ADJUST WITH EASE - The fall protection body harness has 5 easily adjustment points to ensure a safe and comfortable fit for a wide range of body types. The harness features a single dorsal D-ring with pass-through legs and is compatible for quick and safe connection with any manufacturer’s ANSI-compliant fall protection equipment. Palmer Safety Universal Full Body Harness are designed for use by a person with a combined weight (clothing, tools, etc.) of 130 – 310 lbs. (59 – 140 kg)
• 🧰 RELIABLY DURABLE - We provide fall protection gear that is built to last and can keep you out of harm’s way. The 50 foot 5/8” vertical lifeline rope with one locking steel snap hook is made of high strength co-polymer twisted rope and is compatible with any safety harness D-ring. The reusable roof anchor made of galvanized steel with stamped D-ring. Each has a breaking strength of 5,000lbs
• 🧰 COMPLIANT WITH SAFETY STANDARDS - We take working environment safety very seriously. That’s why our roofing fall harness kit complies with various OSHA standards as well as ANSI Z359.11-2014, Z359.18-2017, Z359.15-2014, and Z359.13-2013. It’s a must-have for safe and fully-compliant work operations
• 🧰 WHY PLANK SUPPLY – We provides our customers with the tools and materials needed to complete their project safely and affordably. We focus on servicing the industrial and residential contractors to the weekend DIY warrior with our brand ATERET in rope, personal protective equipment and fall protection. Customer service and satisfaction is the key to our success by quickly delivering great products at affordable prices

User questions & answers

Question:	Is the anchor base flexible for different pitched roofs
Answer:	This shirt in a medium was way too big for me. Even the sleeve length was too long by 6 inches. 5'-8" and 150#. It fit like a cafeteria lady's smock. Absurd sizing in the Carhartt world.

• SAFETY DESIGN PERFORMANCE: YMACHRAY Full Body Harness JO-02 are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. Each of our products is Individually inspected
• PROPER PERFORMANCE: Correct fit is essential for proper performance. Our YMACHRAY Full Body Harness supports users within the capacity range of 100 to 280 pounds (45 to 127 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
• MULTI-PURPOSE Harnesses include rear D-rings and are ideal for use as a general harness tool in a variety of applications, it's and ideal tools for roofing, ladder climbing, construction site worker, warehouse forklift cage work, and for ironworker.
• HARDWARE COMPONENTS : 3 D-Rings. Breaking strength 4000lbs, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-ring for better work position only. Five Adjusting mating buckles with stamping steel material of Min.
• WARRANTY: 45 Days Money-Back & 2 Years Warranty, When You Are Not Satisfied with Our Product, Please Don't Hesitate to Contact Us. BUY WITH CONFIDENCE.

Product features

Tubular Webbing

100% polyester material with internal elastic webbing provides flexible property with Min.Breaking strength: 5000lbs

Large Built-in Hook

Steel Scaffold Hook made of High forged alloy steel material with gate opening 55mm.

Comfortable Padding

Adding breathable EVA foam pad in the waist for improved comfort.

Product description

The Guardian Fall Protection "Cyclone HUV Harness" is designed with the unique x back which leaves the harness straps tangle free. An ideal combination for fall arrest, work positioning, rescue and rope access applications.

From the Manufacturer

The Guardian Fall Protection "Cyclone HUV Harness" is designed with the unique x back which leaves the harness straps tangle free. An ideal combination for fall arrest, work positioning, rescue and rope access applications.

• polyester 100%
• Made in the USA and Imported
• Employees can personalize their harnesses without jeopardizing the integrity of the webbing
• Fully adjustable shoulder, chest strap & leg straps
• Easy adjustment combination buckles
• Unique aesthetic stitch pattern for enhanced strength

User questions & answers

Question:	Can i add my carpenter bags to this harness belt
Answer:	It's China made and our company will guarantee the product for 2 years.
Question:	Is this arness dielectric
Answer:	I am not sure we bought them for our gas grill.
Question:	Will this fit 5,11 200 pound guy or should I go with the XL
Answer:	Haven't had any problem with them rusting over the winter. Great product.
Question:	Is there hook and loop on the waist belt for tool bags
Answer:	Yes, this is Dishwasher Safe.

Product features

Guardian Fall Protection Cyclone Construction Harness

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank.

They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support.

Installation

Personal Fall Arrest

Cyclone Harness may be used to support a maximum 1 PFAS for use in Fall Arrest applications.

• Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs.
• Maximum free fall is 6ft., or up to 12ft. if used in combination with equipment explicitly certified for such use.
• Applicable D-ring: Dorsal

Work Positioning

Work Positioning systems allow a worker to be supported while in suspension and work freely with both hands.

• Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs.
• Maximum allowable free fall is 2ft.
• Applicable D-rings: Side, Shoulder. Applicable D-rings: Side

Restraint

Restraint systems prevent workers from reaching the leading edge of a fall hazard.

• Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs.
• No free fall is permitted Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
• Applicable D-rings: Dorsal, Chest, Side, Shoulder

Rescue/Confined Space

Rescue systems function to safely recover a worker from a confined location or after exposed to a fall. There are various configurations of Rescue systems depending on the type of rescue.

• Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs.
• No free fall is permitted
• Applicable D-rings: Dorsal, Chest, Shoulder

About Guardian Fall Protection

Privately owned and locally operated since its founding in 1993, Guardian has since been the top manufacturer and provider of safety products for America’s construction workers. Guardian is headquartered in Kent, WA, with offices and warehouses located throughout the United States. Supported by its hardworking employees and strong distributor partnerships, Guardian is constantly striving to enhance the safety and productivity of its customers.

Product description

Frontline's Combat Series harness was developed to deliver performance, durability and reliability for workers across all industries. The Combat Series harness is the complete go to solution when looking for a full body harness.

The harness is lightweight but built rigid to withstand the harshest conditions, while also featuring built in suspension trauma straps for added safety in case user is subject to a fall. With Frontline, users working at heights can work with confidence, as we are always building to prioritize with worker safety!

Features and Specs:

• Back, shoulder and waist pads are of moisture wicking material for better breathability and a more comfortable fit to help reduce user fatigue and heat exhaustion
• Made up of high tenacity black polyester webbing and safety orange stitching, makes it easier to do stitching safety inspection because of the color contrasting
• Features 5-points of adjustability, making the harness fits snug and more comfortable on users
• Convenient reinforced belt and rigid pad supports tool belts without harness falling or sagging
• Includes aluminum quick-connect buckle on chest strap & tongue buckles on leg straps for fast and easy adjustment
• Comes with 2 lanyard keepers on the shoulder straps for lanyard placement and to help avoid tripping hazards
• Breaking Strength: 5,000 lbs
• Tested by an Independent 3rd Party Lab accredited to ISO/IEC Standard 17025:2017
• Meets or exceeds applicable ANSI, OSHA & CSA standards

• ✅Back, shoulder and waist pads are of moisture wicking material for better breathability and a more comfortable fit to help reduce user fatigue and heat exhaustion.
• ✅Made up of high tenacity black polyester webbing and safety orange stitching, makes it easier to do stitching safety inspection because of the color contrasting. Convenient reinforced belt and rigid pad supports tool belts without harness falling or sagging.
• ✅Includes aluminum quick-connect buckle on chest strap & tongue buckles on leg straps for fast and easy adjustment.
• ✅Comes with 2 lanyard keepers on the shoulder straps for lanyard placement and to help avoid tripping hazards.
• ✅Breaking Strength: 5,000 lbs. Tested by an Independent 3rd Party Lab accredited to ISO/IEC Standard 17025:2017. Meets or exceeds applicable ANSI, OSHA & CSA standards.

User questions & answers

Question:	What size for someone5.6,187 pound and 36 w
Answer:	Yes, the silver is Level 2 compliant 3M Scotchlite Reflective Material and the other material is ANSI Class 3.
Question:	Does the belt come off
Answer:	Standard type hood... covers all of the head.
Question:	Country of origin/manufacture
Answer:	The bamboo green is no longer in production for this style.
Question:	Can you add bags to this harness
Answer:	I have bought 4-5 of these for my husband . They shrink very little. It is a heavy cotton and the fibers do pull together a little. but it does not lose its shape.

Product description

Cost Effective Combined with Quality

The NEW Warthog MAXX full body harness is hands down the best quality combined with the most competitive price. The premier finished webbing ends and durable polyester material will make this harness stand the test of time. For this price, you will not find more features in a construction harness anywhere.

Certified for Safety

The Warthog MAXX meets or exceeds the strict OSHA and ANSI standards. You can trust that when you are in a precarious area you are secured with an industry tested safety harness. The Warthog MAXX allows you to focus on the job at hand and not be concerned with the risk of injury.

• Comfort with Functionality: Our full body safety harness has a removable waist belt that is not sewn into the harness. The design allows for full movement while still being attached in case of a fall. Our safety harness fits a weight range of 130-310lbs per ANSI Capacity Range. The reinforced quick connect leg straps and chest harness with side D-Rings help to make this the best work harness on the market.
• Perfect for Construction & Roof Work: This full body construction harness is the perfect roofing harness specifically designed with premier fall arrest gear to meet OSHA and ANSI guidelines. We offer unmatched safety harness fall protection and you can feel confident with features such as the alloy steel side D-Rings, break away lanyard keepers and quick connect chest buckle. You will not find more perfect roofing gear anywhere.
• OSHA and ANSI Certified: The Warthog MAXX body harness is OSHA and ANSI compliant. The compliancy guidelines met include: ANSI Z359.11-2014, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910. Safety is the number one priority with the Warthog MAXX.
• Guaranteed for Peace of Mind: We are so confident that the Warthog MAXX is one of the best on the market that we extend a Limited Lifetime Warranty on each purchase. Whether you are using the Warthog MAXX as a construction harness or as landscaping safety equipment, rest assured that you have made the right choice.
• Strong & Durable Material: Our fall protection harness is made from a durable reinforced polyester webbing material. It boasts a flexible, comfortable and removable support waist belt and includes a fall indicator. The waist belt offers additional padding for comfort and support. The Warthog MAXX provides side D-Rings and buckles that are made from steel for premium strength and performance. You can feel confident that the Warthog MAXX will stand the test of time.

User questions & answers

Question:	Does anyone make this in camo
Answer:	They usually refund you and you gets returned label to send the other shirt back
Question:	What is the waist size for the belt. Im a
Answer:	My husband is 6’2 180 pounds and he wears a large for reference.
Question:	Is this reflective
Answer:	If XL fits, we believe an XL in the High Viz should fit the same. Carhartt suggests using your chest measurement for the most accurate fit. An XL: 46-48" a 2XL" 50-52"
Question:	Does the harness come with a Storage bag
Answer:	Yes, the silver is Level 2 compliant 3M Scotch lite Reflective Material and the other material is ANSI Class 3.

• INTERNAL SHOCK ABSORBER – The RATTLER is a single leg safety lanyard with 100% polyester tubular yellow webbing. This sleek and lightweight fall protection device has an internal shock absorber that provides safety from the inside out, eliminating the need for a bulky shock pack. The integrated energy absorber has a maximum deployment distance of 48 inches (1.2 meters), an average arresting force of 900 lbs., and comes with a fall arrest indicator tag that breaks in the event of a fall.
• 2 SNAP HOOKS AND SAFETY LABELS – The KwikSafety DOUBLE RATTLER fall arrest lanyard comes with two self-locking snap hook connectors ANSI tested to a tensile strength of 5,000 lbs. and gate strength of 3,600 lbs. All snap hooks on the lanyard are compatible with full safety harnesses with D-Rings and anchor points as part of your personal fall arrest system. Stay informed about your lanyard with the safety and warning labels located inside the heavy duty protective label cover.
• ANSI TESTED BY 3RD PARTY (Unique to KwikSafety Products) – This safety positioning lanyard (as well as KwikSafety’s other fall protection safety lanyards) is quality checked and tested by a 3rd party accredited testing lab and is in full compliance with ANSI/ASSE Z359.13-2013. The double locking, yellow zinc anodized steel snap hooks are compliant with ANSI.Z359.12 standards. KwikSafety gets all of their products ANSI tested while majority of other safety companies do not and its buyers beware.
• OSHA COMPLIANT (Keep OSHA on Your Side) - Ideal for any project where OSHA compliance is required. Can be used for climbing on a roof or ladder, construction, gutter cleaning, installation, steep roofs, inspection, maintenance, emergency rescue, wind turbines, communication towers, water tanks, wells, ship yards, rigging, window washing. Used by iron & steel workers, roofers, linemen, engineers, inspectors, supervisors, technicians, industrial painter.
• FALL PROTECTION GUARDIAN – With RATTLER, you’ll want to conquer heights as tall as the peak of Malta! KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Espanol (cordón de seguridad, cordón de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality.

User questions & answers

Question:	it is 6 feet fully extended. how long is it when not extended
Answer:	It is fully extended but if you fall it is extended 2 more feet. I hope this helps you . It is a great .
Question:	Where is it made
Answer:	Good morning Larry, Thank you for your interest in our products! Our products are designed, assembled, and packed in the USA and are made with international materials. If you have any other questions or concerns, please let me know! Best Regards, KwikSafety Team
Question:	If I had two of these hooked to a kids harness from the ceiling would it be stretchy and bouncy? Using it for gymnastics purposes
Answer:	No. The only thing bouncing will be the kids off the floor.
Question:	Because this is an elastic fall arrester does that mean if you fall once it will return to original and can be used again
Answer:	If you fall in it there no good after a fall

• COMFORTABLE HARNESS: This full body work harness is designed for full movement while still being attached to a fall protection anchor; it provides both comfort and safety. The removable waist belt offers additional padding for comfort and support.
• PERFECT FOR CONSTRUCTION JOBS: Designed with premier fall arrest components, this body harness meets ANSI & OSHA guidelines. Work in confidence with features like alloy steel side D-Rings, break away lanyard keepers, and quick connect leg & chest buckles.
• STRONG & DURABLE: This fall protection harness is made with reinforced polyester reflective webbing material & can hold workers from 130-310lbs per ANSI Capacity Range. It has a flexible, comfortable & removable support waist belt with a fall indicator.
• OSHA/ANSI/CSA COMPLIANT: The Warthog Comfort MAXX body harness is OSHA, ANSI and CSA compliant. The guidelines met include: ANSI Z359.11-2014, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, CSA Z259.10-2012.
• MALTA DYNAMICS: Our team has more than 140 years combined wearing safety harnesses, so we know a good one when we see it. Each purchase comes with a Limited Lifetime Warranty, so you can rest assured that you made the right choice in safety equipment.

User questions & answers

Question:	S-m-l is “small” right ? not “small-medium-large
Answer:	Yes it swivels
Question:	What is the weight rating on the xxxl harness
Answer:	Yes, it will fit a smaller guy 5'5 170lbs.
Question:	Does this harness come with a dated inspection tag? that can be dated and initialed per inspection? msha requires it
Answer:	It's a good fit, a little bigger than other brands - advertising the same size.
Question:	Are the side d rings attached to the belt, or to the harness? in other words, can i wear the harness without the belt and side d rings
Answer:	Yes