13 best 3m scissor jacks

• ✅ SPECIFICATION - Maximum lifting weight: 1.5 Ton (3,300 lbs). Lift operating distance from 4.13 inches to 15.15 inches. Net weight 5.34 lbs (2.42 kg).
• ✅ SMART MECHANISM - 90% less effort required to lift your vehicle with the innovative ratchet system.
• ✅ FLAT TIRE REPAIR - For any emergency, this Scissor Jack will help you change your tire fast and easy.
• ✅ UNIVERSAL - Designed to fit any vehicle: sedan, coupe, SUV, MPV, hatchback, crossover, wagon and more.
• ✅ GUARANTEED PURCHASE - We know you have options here, and we know that our quality is superior, so we want to make the best choice the easiest one. That's why we will refund you 100% if you have a single concern about ANYTHING. Just send it back our way for a replacement or full refund! The choice is yours.

User questions & answers

Question:	will this work on a 98 acura integra
Answer:	I returned this jack because it was sub par .. scissor jacks work on any vehicle with the proper jacking points.
Question:	Can the alignment head be removed or replaced so that heavy items other than a car can be lifted
Answer:	The alignment head is held by a large rivet.
Question:	This will works with Dodge Dart 2014? Thanks
Answer:	Yes. It works perfectly for that car model.
Question:	Will this fit in the jack compartment of a 2010 jeep wrangler jk
Answer:	What is the width and length, and height? Measure your jeep and check the measurements of the jack.

Product features

Scissor Jack for Car

Package Include:

• 1 x Scissor Jack 1.5 Ton
• 1 x Ratchet
• 1 x Product Manual
• 2 x Car Air Fresheners

How to use?:

1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. The ratchet does not rotate until there is pressure on the jack head (at the beginning you can turn it with your hand).
5. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

Product description

Compact, Light Weight to Carry in Your Automotive

Pro-Lift T-9456 Grey Scissor Jack is the 3000 pound capacity scissor jack. It is a great light weight jack for the garage or to carry in your automobile.

The compact size and the light weight make it easy to position and the handle design makes it easy to lift.

With its built-in extra wide base, it provides you with the additional stability.

Pro-Lift T-9456 Grey Scissor Jack gives you the lifting range from 3-3/4 inches to 15-1/8 inches

- Extra Wide Base for Extra Stability

- Lifting Range from 3-3/4 inches to 15-1/8 inches

- 3,000 Pound Rated Weight Capacity Scissor Jack

- Meets or exceeds the latest ANSI/PALD standards

Specifications

- Capacity: 3000 Lbs

- Package Dimension: 17.2 x 3.9 x 4.7 inch

- Lifting Range: 4-1/8 to 15-1/8 inch

- Item Weight: 9 Lbs

Pro Lift T-9456 Scissor Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Grab one now to carry in your automobile.

• The product is 3000lb scissor jack
• Easy and simple use kit
• The product is manufactured in china
• Extra wide base for extra capacity and stability
• Lifting range from 3-3/4 inches to 15-1/8 inches
• 3,000 pound rated weight capacity scissor jack
• Meets or exceeds the latest ANSI/PALD standards

User questions & answers

Question:	Is there any kind of warranty
Answer:	China. All the products sold in OESS store are made in China.
Question:	Can i use if for cars
Answer:	Hasta el momento no tiene ningun problema, esta plataforma tiene cuatro soportes de hule que ayudan a que no se desplace ni oscile.
Question:	I have a Dodge 2500 truck..Do you think it will work for changing 1 wheel at a time
Answer:	There is some side-to-side mechanical play when fully extended which is about 0.5 to 1.0cm. Also, when fully extended there is some play in the tilt of about 3 degrees. It is not rock solid so it will depend on your application whether or not the mechanical play is an issue or not.
Question:	does it come with handle
Answer:	The maximum loading capacity up to 110lb(50kg)

Product features

Pro-Lift T-9456 Grey Scissor Jack - 3000 lb. Capacity

Features:

• 3,000 lb capacity scissor jack
• Extra wide base for extra capacity
• Lifting range: 4 1/8” to 15 1/8”

Product description

Lippert Components 24-inch lift stabilizer jacks provide a cost-efficient way to stabilize your RV or trailer. Our manual stabilizer jacks feature easy, bolt-on installation and powder-coated, rust-inhibitive finish. This single stabilizer jack comes with mounting hardware.

• Lippert Components 24-inch manual stabilizer jacks are an easy and inexpensive way to add stabilization to your RV in order to reduce rocking and swaying
• Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and add stability to RV fifth-wheel or travel trailer
• 24" rise
• Easy bolt-on installation
• Mounting hardware included

User questions & answers

Question:	How far apart are the bolt holes and what is the width of the upper fork or arm? My current bolt holes are 2" apart and the bracket is 2 3/8" wide
Answer:	I just talked to Tonya at Lippert who said that neither the 24" or 30" jacks come with a round foot pad. And there is no separate foot pad available. If some one has a Lippert or 3rd party part number for a round foot pad that will attach to the 30" bowtie foot, please post it.
Question:	What size is the bolt that raises and lowers the jack
Answer:	No, that’s too high
Question:	Does the 285344 30" jack come with the circular top and circular base
Answer:	I can't speak for the seller, but this is definitely to jack up your car (within the weight restrictions) to change a tire.
Question:	The pictures show a round base attached to the bowtie. Do these come with that round base
Answer:	Mine is 1 5/8" X 2 5/8"

Product features

Features

-Lippert Components manual stabilizer jacks are an easy and inexpensive way to add stabilization to your RV in order to reduce rocking and swaying.

-Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and add stability to RV fifth-wheel or travel trailer.

-Easy bolt-on installation; mounting hardware included.

-Powder-coated, rust-inhibition surfaces.

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to a 14" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Heavy-duty steel frame
• 1100 lb. weight capacity; will not lift trikes

User questions & answers

Question:	what is the jack height when lowered
Answer:	I mean if the floor is level, then I’d say it’s very stable. Can’t attest to only 25 pounds. I’m on average only lifting 800-1000 lb bikes.
Question:	will this work for my harley trike
Answer:	I have an 83 FLHT on mine and we used a couple of thin pieces of wood under the bike. If you could put a couple of pieces underneath to take up the space. I wouldn't rest my engine on the lift.
Question:	With the dolly, amazon indicated apr 24-may 17 delivery timeframe. does that sound right? that's over a month out. thx
Answer:	I used it on Harleys only. But when I do. I use a flat aluminum disposable baking pan. I also have a large lift that I put my bike on.
Question:	Has anyone attempted using this lift with a late model Indian
Answer:	I don't have an exact answer, you'd probably be better off just getting a dirt bike stand though. I don't think the goes much past a foot. Works great for my Vl800 cruiser. But it's only got 6 in or so of clearance

Product features

Extreme Max Wide Motorcycle Scissor Jack

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 3-3/8", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 3-3/8", the Extreme Max Wide Motorcycle Jack offers a tremendous 10-5/8" vertical travel, topping out at a fully-extended height of 14". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also available from Extreme Max:

Extreme Max 5001.5059 Motorcycle Scissor Jack with Dolly

Also available from Extreme Max, the Motorcycle Scissor Jack with Dolly features the exact same jack, but adds the addition of a dolly tray to increase its versatility. Sliding your jack into place underneath your bike has never been easier.

Product description

Specification:

-Material: Stainless Steel

-Height Range: 1.77" - 6" (45-150mm)

-Platform Size: 4"x4"(100x100mm)

-Maximum load bearing: 6.6lbs(3kg)

Package content:

1 x Lab Scissor Jack Lift

• ✅ HIGH QUALITY - Made of quality stainless steel, this mini lab jack stand rust-resistant and strong. With rubber pad at the bottom of the base, the lab scissor jack provides a quite steady lifting performance.
• ✅ EXCELLENT PERFORMANCE - Platform size: 4"x4"(100x100mm). Adjustable height range: 1.77" to 6" (45-150mm). Maximum load bearing: 6.6lbs(3kg).
• ✅ EASY OPERATION - Lift place should be smooth, rotating the hand wheel to lift on the front panel can be adjusted to the desired height. Adjustment knobs provide smooth and accurate height adjustment.
• ✅ APPLICATION - For physical, chemical, biological experiments lift the object or instrument, laboratory jack stand is an essential part of a busy lab, It is widely used as a supporting instrument to adjust height of objects such as alcohol burner and so on in chemistry, physics and other scientific objects.
• ✅ MAINTENANCE - It should be kept clean and stored in a cool, dry and non-corrosive place after using.

User questions & answers

Question:	Does turning the knob clockwise to rise the platform also unscrew the knob from its stem? incredibly, some work that way
Answer:	The knob and attach threaded rod never remove from the jack no matter what way you turn it. I order these all the time and for the last few orders they never arrived and I got refunded so be careful. I am not sure what is going on with the seller anymore but there is no way five different orders got "lost" and amazon had to refund me.

Product description

An Amazon Brand

• Microphone cable for studio recording and live sound
• High-quality XLR male and female connectors; 3-pin XLR male to XLR female
• Protective metal housing; flexible PVC jacket with 6.0mm outer diameter
• All copper conductors and inner copper spiral shielding; shielded cable reduces interference and excess noise
• Measures 10-feet long; backed by an Amazon Basics 1-Year Limited Warranty

User questions & answers

Question:	are these as good as GLS
Answer:	I never used GLS but I know I'm very happy with these I haven't had any breakup or interference issues with home recording and they are very durable and insulated well, so far so good for recording guitar keyboard bass microphone vocals and drums so you should be ok with your purchase the quality and price is great.
Question:	Noob question will this work on a behringer u-phoria um2 and bm-800 mic? thanks
Answer:	This is a standard XLR cable. It will connect your mic to your input device. The mic requires "phantom voltage" to be supplied from the input device to the mic. Most Behringer devices will provide this, but double-check to be sure. Bon chance.
Question:	I have the bm 8000 excelvan along with the behringer um2. I got a xlr to aux that came with the mic to plug directly into my laptop. Will this work
Answer:	Should plug in just fine. But depending on your set up make sure the length is what you want. For streaming and recording gameplay or general use with discord, ts an so on its fine at 6ft legth. Just depends on your set up.
Question:	where do we get XLR pass through face plates
Answer:	https://www.amazon.com/gp/aw/d/B0002BG31C/ref=mp_s_a_1_1?ie=UTF8&qid=1524592792&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=Pro+Co+WP1013+Dual+XLR+Female+Wall+Plate&dpPl=1&dpID=3132lqwMorL&ref=plSrch

Product features

3-Pin Connector

The XLR microphone cable's male to female connector with three pins and zinc alloy construction provides secure, uninterrupted audio feed.

Clean Sound

The cable's all-copper conductors and reinforced inner copper spiral shielding help prevent outside noise interference.

Reliable Strength

Built with a flexible 6.0mm PVC jacket and durable metal housing, the microphone cable offers dependable performance.

Plug and Play

The cable offers plug-and-play convenience with XLR-compatible PA systems or equipment.

• Small Cable Cover for A Single Cable: Perfect when you only have one cable to conceal. Designed to enclose a low-voltage wire or cable such as a power cord or 1 cat5 cables, 1 speaker wire, or 1 lamp cord.
• 8 Pcs Cable Channels for Maximum Coverage: Each cable channel is 0.59” x 0.4” x 15.7”. Total length 125 inches. Provides ample length to accommodate any home or office project!
• 130“ Strong Double-sided Adhesive Tape: Comes with clear PE mounting tape that has strong adhesive and is flexible. Simply secure the channel with the cable where needed. (Not suitable for textured surface/walls)
• Home and Office Organizer: Use our cable concealing system to organize and manage the power and electrical cords on walls, work areas or entertainment system
• Family Safety Comes First: Loose cables are not only unsightly, but they could also pose a possible danger to your baby, children and pets. Install our easy-to-use wire concealer to prevent unforeseen accidents.

User questions & answers

Question:	How can i get more adhesive tape
Answer:	You can go to Home Depot or any hardware store and look for double sided tape with similiar thickness.
Question:	Does the height of 0.39 inches include the cover, or is that the height inside the channel
Answer:	.39 inches is the outside height. The inside height, with the cover in place, is .30 inches.
Question:	Is the removable? Using it in a rental apartment
Answer:	Initially, we were thrilled with this product as it was very easy to install and secured our cords in a very clean and safe manner. We have a playroom for our one-year-old twins and this concealed are chords nicely. However, I’m guessing this is meant to be a permanent fixture in your home. There is absolutely no way to remove these cord covers without it taking all of the paint with it. We tried every way to remove the covers without damaging our walls and this is what we were left with. We have extreme wall damage now that will require the entire wall to be repainted. Great product, but gets 3 stars from us due to the extreme damage it caused us in the end.
Question:	Where can I buy more inside and outside elbows
Answer:	Hi, We are sorry our item is all in well packed set in Amazon warehouse. We will consider selling separated pieces in the future. And for your situation, you can try to install without elbows: 1. Our channel can be easily cut. Use a pencil mark a 45 degree line at the ends of two channels. 2. Cut alone the line with sharp scissors or hacksaw. 3. Install the two channels end to end, you will get a 90 degree turn. Hope this information could be helpful. Regards,

Product features

Our cord concealing system is ideal for:

• Home entertainment systems
• Speaker cables
• Phone/Fax lines
• Lamp cords
• Computer cords
• Ethernet cables
• Home office wiring
• And more

Note:

• The tape is not to be used on texture surface.
• Our mounting tape is strong, after installation, it will stay well in one place. When removing, warm it up with a blow dryer(better a heat gun if you have) to soften the adhesive, then it will be easily pulled off without damaging the surface.

Home and Office Organizer

Cable concealing system perfactly organizes and manages the power and electrical cords around desk, other work areas or entertainment system.

Family Safety Comes First

Loose cables are not only unsightly, but they could also pose a possible danger to your family and pets. Install our easy-to-use wire concealer to prevent unforeseen accidents.

Cover for a Single Cable

Perfect when you only have one cable to conceal. Designed to enclose a low-voltage wire or cable such as a phone/fax line, speaker cable, or lamp cord.

Strong Double-sided Adhesive Tape

Comes with 130" clear PE mounting tape that has strong adhesive and is flexible. Simply secure the channel with the cable where needed.

Product description

Item:OPENROAD 2 Pack 24inch RV Stabilizing Scissor Jack,Touring Car Jack,Leveling Scissor Jack（Max:5000lbs）



Information:



Capacity:5000Lbs

Type:Scissors Jack

Finish:Black Power Coat

Travel:4-5/8-24inch

MIN Product Height:4-5/8inch

MAX Product Height:24inch

Pcs/Ctn:2Pcs

N.W./G.W.:11.4/12kg

Package Size:71*27*13.5cm



Package Content:

2 X Scissors Jack

1 X Crank Handle



Note:

Please Check The Size and Capacity Again,Avoid Returned The Products Because Of Size and Capacity!

If You Received a Broken Package,Please take a picture and Let Us Know first.

• 【Capacity】2 Pack 24inch 5000lbs Scissor Jack With Crank Handle
• 【Products Size】Min Height:4-5/8inch Max Height:24inch
• 【InStallation】Allows Either Bolt-On Or Weld-On Installation
• 【Effect】Stabilizing And Leveling Your Rv/Trailer, Remains Steady On Soft Surfaces Because Of Wide Bow-Tie Base
• 【Finish】Made Of a High-Quality Black Powder-Coated Finish, These Scissor Jacks Are Stable Enough To Keep The Chassis Steady On The Road, Helping To Raise And Lower The Spare Tire From The Vehicle

User questions & answers

Question:	will these jacks lift and support a 2500lb boat trailer 8" over the 6 winter months
Answer:	YES,This is achievable
Question:	How much can a single jack lift
Answer:	Hello sir, The capacity of the jack is 5000lbs Thanks

Product description

Solid Aluminum bolt on jack pads to be left on the car while driving for the 6th gen Camaro, except convertible

• Bolt on jack pads for the 6th gen Camaro, except convertible
• Lift Points Made of billet aluminum
• bolt on jack pads to be left on the car while driving
• no drilling required,Easy install
• These are angled as to not bend the pinch weld as the car is lifted by a floor jack

User questions & answers

Question:	What set do you buy for a 2016 SS Convertible
Answer:	I have a 2017 2SS convertible. I bought the set for the 2016-2018 (except convertible). I an not sure why they say not convertible. They fit and work fine on mine.
Question:	Can i use this 2010 lexus isf
Answer:	If it has pinch welds there shouldn't be any problem.
Question:	Do these work on other alpha platform vehicles like the 3rd gen cts
Answer:	I have a RS 2017 convertible. They pads fit but the problem is that your jack lift need to be very very very low for being able to go under the pad. The pad are 1 1/2 inch too high.
Question:	Does anyone have dimensions of this product, looking for the depth, width, and length of slot, also over all height
Answer:	These are really the same as the ZL1 Addons jack pads, it also depends on what they will go on, I have a 2019 ZL1-1LE and I have 3 of them on each side, that way I can use my Quick Jack to raise the car off the ground, also too the jack pads will accommodate really any pinch weld because they have set screws to hold them in place, just use blue Loctite.

Product description

Warning: These stabilizer jacks are for RV stabilizing and leveling purpose only. NEVER use for lifting, changing tires or supporting weight of any vehicles. Improper use can result in property damage, serious injury or death and will void the warranty!

• StabIlizing and leveling your RV/Trailer
• Remains steady on soft surfaces because of wide bow-tie base
• Includes 2 steel jacks, 1 crank handle
• Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5"
• Capacity: 5,000 lbs per jack

Product description

Designed for any situation or project, T-Rex heavy duty tape is ideal for homeowners, craftsmen and outdoorsmen who demand the highest quality tools. Unlike ordinary duct tapes, this ferociously strong adhesive tape is built for intense holding power so you can tackle long-lasting repairs, DIY projects or the task at hand easier and quicker. Its aggressive double-thick adhesive is what gives this cloth tape the ability to stick to rough, dirty surfaces through all-weather types and temperatures. Whether it’s around the home or on the job site, T-REX Tape will hold longer and stronger than regular duct tape making it ideal for any project big or small.

• Premium adhesive and high tensile construction
• Made with UV resistant materials that block harsh UV rays from weakening the tape adhesive
• Can be used indoor/outdoor on brick, concrete, shingles, painted and non-painted wood, and vinyl siding
• Made with heavy-duty knit cloth for long-lasting repairs or applications
• Durable waterproof backing keeps fixes secure from water and extreme temperatures

User questions & answers

Question:	Will this work to tape paper flowers to a cotton fabric backdrop
Answer:	it is sticky so it might. I used mine to repair gutters.
Question:	will this tape work well on a torn shelter cover outside ?? gorilla glue tape didn't hold it.. we have a seam that is weak that needs repaired
Answer:	I used it on my greenhouse to patch torn plastic, it worked for couple months. I don't think it would work in a shower or bath tub
Question:	Description says "extreme temperature". Can someone define by degrees
Answer:	Hello I tried it to be sure. I used a permanent black sharpie and it works great! Won't even come off if it's wet, I love this tape it's so strong, light weight and easy to use. I think it's just what your looking for. Hope this helps.....
Question:	will this work for high heat air conditioning ducts (well, not that high, but they do get warm and wear out dollar store duct tape fast
Answer:	Hello Sam, Thank you for sending an inquiry. The XFasten Strong Duct Tape is our strongest adhesive that is meant for long term repair. It is weatherproof, UV-resistant and water-resistant. This means that, yes, it will be effective on your stucco and it can withstand various weather, temperature, moisture, and humidity conditions. As for the possibility of pulling the paint off, it is a strong adhesive tape but it is still designed to be easily removable. However, upon removal, if you want to make sure that no residue is left, or that it does not lift the paint off upon removal, then we recommend heating the tape using the warm air exhaust of a hairdryer. This will soften and partially melt the adhesive and make it easier for you to remove the tape without it pulling the paint off from the surface. We hope that we have answered your question, Sam. Please don't hesitate to contact us should you have any further inquiries. Have a nice day ahead!

Product features

T-REX Ferociously Strong Tape

Fierce in wet conditions. Intense durability in cold temperatures. Strong hold on rough surfaces. Three distinct layers combine to create this weather-resistant, ferociously strong tape.

All weather

Waterproof backing to repel fierce weather even in cold temperatures.

Works longer

High tensile woven scrim for strength and durability.

Holds stronger

Double thick adhesive for a strong hold on rough surfaces.

T-REX Brand Ferociously Strong Tape

From heavy-duty packaging and mounting tapes to a wide variety of aggressively strong tapes for all-weather durability, T-Rex brand is designed for those moments in your life when you need intense holding power, no matter the application. Whether it’s simple, around-the-house fixes, tough projects on your seasonal to-do list or moments in the great outdoors, there’s no project too big or too small for these ferociously strong products.

Product description

This 2 ton scissor jack meets or exceeds ANSI standards and has a heavy duty steel construction. Insert the jack handle into the hole of the handle socket. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket. To raise load, use one hand to hold the front part of the handle, and use the other hand to turn slowly at the rear end of the handle clockwise. To lower load, use one hand to hold the front part of the handle, and use the other hand to turn slowly at the rear end of the handle counter clockwise.

• Lifting range is 5 inches to 13 inches
• Wide base (7.25 inches x 4.25 inches) for load stability
• Heavy duty steel construction
• Meets or exceeds ANSI standards
• Maximum capacity: 2 tons (4,000 pounds)

User questions & answers

Question:	Will this unit work with a standard hook-type foldable wrench
Answer:	It won't work with capacitor start motors
Question:	Specs state a minimum lifting start point of 5 inches. Is this the minimum height at which the jack attains enough leverage to begin lifting
Answer:	Without a photo tachometer the exact speed of the router can not be determined. When the speed control rocker switch is set to the variable position and the controller knob is turned to the highest setting, the maximum rpm of the router motor is limited to approximately 80% of full speed.
Question:	how to turn this
Answer:	Pumps need muth power in the beginning of their operation, so be careful. Otherwise numbers of specifications seems alright.
Question:	What is the fully collapsed height of the jack
Answer:	Yes, I would say horsepower matters, but this is related to the amperage. I use this speed control on a router that is also 15 amps and it works great. I'm not sure why you would want to change the speed of a power miter saw, but this unit should work fine.

Product description

Compliance In A Can Light with Protect 2199802 Compliance In A Can Light fall protection kit. Comes with an 1191995 five point adjustment full body harness with a single back D-ring and mating buckle leg straps. Universal size fits small-large. Also includes a 134100526 foot pack style shock absorbing web lanyard with attached 5/8 inch rope adjustor and 50 foot drop line rope with 3600 pound snap hook on one end. Complete fall protection system in one handy container. Compliance-In-A-Can kits feature designs that incorporate improved fit, updated colors and durable yet lightweight construction. Protect PRO gear provides greater comfort and added safety, which translates to reduced worker fatigue and increased productivity. Plus, each and every Protect PRO lanyard now features 3,600 lb. gated hooks meeting ANSI Z359. About Capital Safety, the world's leading designer and manufacturer of height safety and fall protection equipment with 20 operating sites worldwide, is home of the DBI-SALA and PROTECTA brands. All of Capital Safety's fall protection and rescue systems are backed by extensive training, knowledgeable technical assistance and professional customer service.

From the Manufacturer

Compliance in a Can is often imitated, but never matched Protecta pioneered the creation of a complete fall protection system available in a convenient container The success of the original “can” spawned the creation of several variations with different anchorage devices Each kit offers a complete set-up including an anchorage device, body support and connecting component for convenient compliance and safety on the job This “ABC’s” approach to fall protection simplifies the buying decision and makes choosing the correct system simple, fast and safe Our easy to use kits and anchorage devices provide the perfect solution and are legendary for their performance, value, quality and safety

• Each kit offers a complete set-up including anchorage device, body support and connecting component for convenient compliance and safety on the job
• Hinged style anchor is easily installed on flat or sloped wood roofs with nails
• These harnesses incorporate materials that are durable and built to last, they offers economical compliance with quality, reliability and safety you can trust
• Extremely lightweight system is easily manuevered on lifeline, and the PRO shock absorbing lanyard limits forces to safe levels during a fall for complete safety
• Roofer's fall protection kit includes AJ730A reusable roof anchor, 1191995 FIRST harness, 1340005 rope adjuster with lanyard, 1204001 50 ft (152m) lifeline and bucket
• For industrial/occupational use only. Not for consumer sale or use