13 best high water alarms

Product description

Rule 33ALA Marine High Water Bilge Alarm (Mercury Free, 12-Volt), White

• Consists of a float switch and an in-dash gauge that features both a visual and audible 85 db alarm
• Allows an unarmed compartment to be constantly monitored
• Complies with CFR 182. 530, which requires a visual and audible alarm in each unmanned space on commercial vessels at least 26' in length
• For use with pumps with a current draw of up to 20 amps @ 12 volts
• Size: 2-1/4" x 5" x 2-1/64"
• Sport type: Boating

User questions & answers

Question:	can you wire in a 2nd buzzer for both upper and lower helms
Answer:	Yes it has a cover.
Question:	Can you buy just the Buzzers
Answer:	Yes that's about all I do is mig
Question:	Can you shut it off
Answer:	Never been a fan of Lincoln hoods but it is clearer than my Optrel, Speed glass, and Miller elite. Co-workers who do use Lincoln hoods seemed impressed with Esab clarity.
Question:	What are the dimensions
Answer:	true color blue

Product description

Monitors bilge water, activates red LED and buzzer when high bilge water present. Bilge warning

• High Bilge Water Warning
• Green ON light, Red Warning Light, Loud Buzzer
• Includes Panel and Detector
• Panel measures 3" x 2", Detector 2-3/8" x 1-1/2" dia
• Reliable Float Technology

User questions & answers

Question:	How many dB
Answer:	4 5/8" X 5 5/8"
Question:	Are there’s any wiring instructions that supposed to come with this? I got mine delivered and I believe there’s missing a wire
Answer:	You can use one available at your local welding supply store. I didn't see any on Amazon.
Question:	what is the current draw, how fast will it drain a battery with the green light
Answer:	It says in the description that the cutting/ torch mode is a 4 shade. Some have a shade 5 but 4 should be fine, definitely not too dark.
Question:	Is the alarm panel suitable for installation in the cockpit? Is it weather resistant
Answer:	If you ever have any trouble with this welding helmet or any other replacement parts, just email us at [email protected]

Product description

The Smart Water Leak Monitor Sensor has Wi-Fi capabilities so you can connect to your home network. Whether you are in the office or on the road, you can check the status via TUYA / Smart Life app at any time. At the same time, you can also choose to open SMS or PHONE VOICE CALL NOTIFICATION( Value-added Services).

1. With two alarm modes you can fully understand the situation of the water leakage, so you can handle it quickly and avoid further losses.

2. As soon as the water detector detects leaking water, 100dB alarm will sound within 1 second and an alarm message will be sent to the smartphone within 2-10 seconds (depending on the network speed).

3. Built-in rechargeable battery to avoid battery replacement. More comfortable and energy efficient.

4. The small water detector with 5.9ft long cable will not be damaged at high water level and will adapt to more complex installation environments.

5. The water sensor can also be used with the power turned off and the power down network, as the wireless alarm has a battery and a horn, it can also trigger an alarm in case of water leakage, so you can handle it quickly and avoid further losses.

(The water alarm automatically restores after the network is restored, the network does not need to be reconfigured.)

6. The 100dB alarm tone will not be hard, so you will be informed in time about the water leak.

7. With the TUYA App and the Quick Start Guide, it only takes a few minutes to install the device.

Everything you need for an installation can be found in the packaging - simply connect the water detector via the app to the Wi-Fi network, and you're done.

Note: Charge the water detector before use.

Delivery:

1 x water leak detector

1 x probe cable

1 x ring tone setting / reset pin

1 x user manual

1 x rubber pad

• 💎 RELIABLE PERFORMANCE 💎 If the water sensor detects leaking water or the preset limit overrun, the 100dB alarm will sound and alert you to the situation, preventing potential water damage.（❤ Please Note: Only support 2.4G Wi-Fi, we have published the operation video of this detector on YouTube. Please search "shonmau" to view it❤ ).
• 💎 DOUBLE SAFEGUARD & QUICK REPORTING 💎 As soon as the water detector detects leaking water, 100dB alarm will sound within 1 second and you smartphone will receive an alarm message by the Tuya APP within 2-10 seconds (depending on the network speed).This is free to use. 【IN ADDITION - we also provide the second level of security (value-added service), you can choose to open the SMS or phone call notification alarm function on the app. The annual value-added service fee is no more than $2.
• 💎 CHILDREN-EFFICIENT INSTALLATION & OPERATION 💎 No gateways and complicated cabling required, you can connect our water sensor to your home Wi-Fi in just a few simple steps (2.4G Wi-Fi only). Whether you are in the office or on the road, you can check the status via app at any time. You can also share this with others, and more people can receive alerts and track the progress of wireless sensor activity.
• 💎 WIDE APPLICATION 💎 The water monitor detector can be used in washer / bathrooms / basements / sinks / water heaters / aquariums dishwashers / refrigerators / fish Tanks / plumbing / toilets / behind toilet / water filtration units / garbage disposals / sump pumps etc. It can also be used to monitor the preset limit of water level in bathtub / pool / pool and other scenarios. The small water detector with 5.9ft long cable probe will adapt to more complex installation environments.
• 💎 REMOTE ELECTRONIC WATER SENSOR ALARM💎 7 * 24 Hours Fast Response Service-You can always contact us, if there is any question about the water alarm. We will respond within 24 hours, avoid making you wait so long.

Product features

Whether you are in the office or on the road, you can check the status via TUYA / Smart Life app at any time,any where.

1. With two alarm modes you can fully understand the situation of the water leakage, so you can handle it quickly and avoid further losses.

2. As soon as the water detector detects leaking water, 80dB alarm will sound within 1 second and an alarm message will be sent to the smartphone within 2-10 seconds (depending on the network speed).

3. Built-in rechargeable battery to avoid battery replacement. More comfortable and energy efficient.

4. The small water detector with 5.9ft long cable will not be damaged at high water level and will adapt to more complex installation environments.

5. The water sensor can also be used with the power turned off and the power down network, as the wireless alarm has a battery and a horn, it can also trigger an alarm in case of water leakage, so you can handle it quickly and avoid further losses.

(The water alarm automatically restores after the network is restored, the network does not need to be reconfigured.)

6. The 80 dB alarm tone will not be hard, so you will be informed in time about the water leak.

7. With the TUYA App and the Quick Start Guide, it only takes a few minutes to install the device.

Everything you need for an installation can be found in the packaging - simply connect the water detector via the app to the Wi-Fi network, and you're done.

Tuay APP No Monthly F-ee Push Water Leak Alarm Notification

When the water detector is connected to the network normally, if a water leak is detected, Tuya APP will send you an alarm notification within a few seconds. So that you can deal with it in time to avoid your greater property loss. There is no F-ee to use this function.

Tuya APP can not only connect our Wi-Fi water alarm, but also connect all Tuya smart products and monitor them in real time. Moreover, many control products of Tuyasmart can be connected with Alexa and Google Home to realize voice control, such as smart switches, smart bulbs, etc

VALUE ADDED SERVICES

If you open this value-added service function, you can not only receive free reminders from Tuya app, but also receive SMS or voice call alarm notifications.

Why Choose Our Water Detector Alarm?

When there are elderly people at home who forget to turn off the water, children play with water and forget to turn off the water, in these cases, if you put a detector in these places, you will receive a water leak in time.

Wide Application Scenarios of Wi-Fi Water Detector, Home, Office etc.

You need to connect the product before using this function

Enter the main interface of Tuya APP-Smart-Automation-then click "+" in the upper right corner

Select the alarm status of the detector

Water leak sensor-Flooding detection state-Water immersion alarm

Select water leak notification push

Send notification-Select notification method (Phone notification / SMS notification), you can choose one of them. If these functions are not enabled in, there will be a prompt for you to open them. You can quickly open them according to the prompt on the app interface.

In the figure, the function of opening SMS is taken as an example

When a leak is detected, your phone will receive an SMS alert reminder (if you choose to activate the SMS notification function), this feature is 2 D-ollar a year. If you activate the voice call notification function, you will receive a voice alarm call.

Product description

The Resideo/Honeywell Home water leak and freeze detector is an early warning system that notifies you on your smartphone when a leak is detected or the temperature drops bellows a temperature of your choice. By catching it early, you may be able to avoid expensive repairs and loss of treasured items.

• Wi-Fi water leak detector sends alerts by text and email. Also has an audible alarm. Geofencing technology can tell who's nearest, and sends an "all clear" when the problem has been resolved. Does not need a separate hub or base station. A 4 Ft. extension sensors (sold separately). Senses temperature and humidity. Monitoring home humidity levels can assist in alerting homeowner of potential mold formation in the home. Install water leak detection systems on major appliances such as refrigerators, washing machines or hot water heaters to monitor leaks. Detector is reusable. Cold-Alert detection. Easy to install.
• Temperature sensing -30F to 150F (-35C to 65C)

User questions & answers

Question:	Does anyone know whether the external contact is a binary open/closed detector (normally open?) (Might adopt this for something else
Answer:	No but frost up have not had it freeze yet filling up 4 36" tires for 8psi up 35psi
Question:	Will it work with Lyric home security system with central station
Answer:	Yes, just make sure your hose and blow gun can handle 150psi safely!
Question:	Just got,setup was easy,placed near sump pump pit. Tested by wetting cable sensor & unit alarmed, but no option to silence thru app or email notice
Answer:	Yes, we have 100’s ready to ship. We are still shipping daily.
Question:	I installed detector in vacation home. Returned home, 3 days later detector went off line despite wifi/battery still working. How do I fix remotely
Answer:	Right hand thread.

Product features

Peace of mind wherever you go

Leaks and frozen pipes can cause serious damage to your home. With Lyric Water Leak and Freeze detectors you can get early warning. By catching it early, you may be able to avoid expensive repairs and loss of treasured items. They can be placed near trouble spots like the sump pump, water heater, washer and under sinks. Each can be individually named and registered in the Lyric App and easily connect to your home Wi-Fi network. If a leak is detected or pipe begins to freeze, the Lyric App on your phone will alert you wherever you are.

Water Leak Detection

The average water leak causes $7000 in damage. Be notified of a water leak while it's measured in drops.

Water Sensing Cable Included

Detect water with sensors on base of unit or expand coverage with included 4 feet water cable sensor.

Temperature and Humidity Sensing

Use to detect temperatures that can freeze pipes, and humidity that could damage valuables.

Lyric App

The Lyric app guides you through the simple set-up of the Lyric Water Leak and Freeze detector with step-by-step instructions. From here you can see all your Lyric Water Leak and Freeze devices and even control your thermostat to prevent possible freezing.

• Detects as little as 1/32 in. of water to offer an effective early warning system
• Solid-state circuitry is extremely sensitive and reliable
• Loud 110 dB alarm can be heard throughout the house
• Sensor has a 6 ft. wire so it can be extended into a sump pit, or mounted on a wall
• Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)

User questions & answers

Question:	what is size of sensor
Answer:	I do not know if these two items are the same. I'm sorry that I cannot be of assistance,
Question:	is it easy to reset
Answer:	According to customer service at Kidde, the FireX FADC reccomended Kidde replacement options are the i4618, the i5000 and the i12060, with the i4618 and i5000 being the preferred models. However other people at Kidde say that practically all Kidde's will replace the FADC, but you may have to swap the wiring harness, pretty simple if you can run a breaker box and a wire nut. I would call the help desk at 1-800-888-6788 to verify your present situation. Make sure you have the model NFO, of course, and the manufacturing date stamped on the back.
Question:	if the battery is low, will it give you some sort of audible/intermitten beep warning (like a smoke alarm
Answer:	It does not.
Question:	How do you splice in more wires to create a dual sensor using the one box? Want to put 1 box and 2 sensors in a tight location
Answer:	Is i4618 interchangeable with Firex 120-1072? Can I attach to the same base?

Product features

30 Years of Dependability

For three decades, The Basement Watchdog High Water Alarm (Model BWD-HWA) has been protecting homes from the mess and expense of water damage.

Place It Anywhere

Put The Basement Watchdog High Water Alarm (Model BWD-HWA) next to a water heater, under a laundry tub, a sink, or anywhere water damage is likely. The alarm includes 6' of wire, which you can extend up to 100', allowing the sensor to be used in hard-to-reach places.

Detects Leaks, Big and Small

All it takes is 1/32" of water to set off a piercing, 110 dB alarm. The problem is detected before a flood occurs or mold can grow. The Basement Watchdog High Water Alarm (Model BWD-HWA) is so sensitive that the moisture from your fingers is enough to set off the alarm.

Small Investment, Big Protection

For a small investment, you get big protection. The Basement Watchdog High Water Alarm (Model BWD-HWA) gives you an early warning system that will save thousands in cleanup and repairs by heading off a drip that started under your sink, a broken fridge water line, or a water heater that sprung a major leak.

Product description

Monitor your outdoor pump or Septic System Level from the the comfort of the indoors. SumpAlarm indicates visually and audibly when a pump is not operating as it should by monitoring the water level and sounding an alarm when a high water or pump failure situation occurs.



The large (1 inch) LED indicator light is visible from hundreds of feet away. When a high level alarm condition exists, a flashing red light and 90db horn becomes active (this horn is directional, so please make sure you have it facing your home). Place the float, mount the head unit, plug in the unit, and the installation is complete.



- Has rear mounting holes for customer mounting. Includes Mounting Feet.

- Includes wall anchors for head unit, zip ties for floats, and instructions.

- Mercury Free Float Switch is Rated for 100,000 operations, suitable for use with potable water.

- It can be used in sump pumps, water tanks, lift stations, low density oils and sewage water

- Unit is wired for high level alarm, but can be reversed for low level alarm

- 110 Volt Units have standard 110 Plug; 220 Volt units have pigtail ends



Access the user manual for the 110V device at docs.sumpalarm.com/SW-120V-1L.pdf

Access the user manual for the 220V device at docs.sumpalarm.com/SW-220V-1L.pdf

• A long life LED Pilot Light and 90 db Horn sound on a high level event
• Rated for Indoor and Outdoor Use with weather proof enclosure and elements
• Package contains a coupon for $10-$50 cash rebate with your video testimonial
• Easy installation. Enclosure can be wall mounted using enclosed wall anchors
• 6' AC Cord, 10 foot Float Switch Cord from Alarm to Sump/ Tank

User questions & answers

Question:	Would the warranty be voided if I disconnect the float cable in order to enclose it in pvc tubing
Answer:	yes
Question:	Will this unit work on a sump pit which has two pumps
Answer:	No you can't. I'm on my third one and wish they sold just the buzzer.
Question:	I just ordered this unit. Does it come with any mounting hardware, apparatus, or instructions? Thanks
Answer:	It should shut off when water level is lowered - it is a float switch
Question:	What is the advantage of having a power on switch? Should it be on all the time? Also, is there a distance it should be away from the septic tank
Answer:	Hello, The audible alarm need a hole cut with a diameter of 2.125" The front of the alarm has a diameter of 2.42" and the length of the alarm is 3.5" long. The float switch is 5-1/4" Long, 2-7/8" High and 2-1/2" wide. Regards, Xylem.

Product description

Product parameters of water detector:

Voltage: DC 9V

Volume: 120 dB

Number of probes: 2

Probe line length: 16.4 feet

Host size mm: 98x46x22

Flash frequency: 150 times / M

Volume: adjustable volume

Standby time: more than 1 year

Installation method: double-sided adhesive or screw fixation

If you encounter any problems about our water sensor products during installation or use , please contact us in time and we will deal with them for you as soon as possible. Email [email protected]

• 【Dual Bobber Probes Sensor Design】- It can detect water shortage or overflow. You can choose to use one or both functions according to your needs. The overflow probe is placed above the water level. When the water level rises to the detection position, the float will rise and trigger the magnetic induction, thus triggering the alarm. Instead, the water shortage probe is always placed in the underwater position, which triggers an alarm when the water level drops below the float.
• 【120 dB with Red Light Strobe Alarm - Volume Adjustable】- The volume of the water alarm can be adjusted according to the installation distance, and the alarm can also be used as a home safety alarm. You can DIY yourself, the alarm will be triggered when the two wires on the probe are shorted.
• 【Extendable Detection Line】- The detection line of this water detector can be extended to 164ft to meet the needs of your family. Please use good quality copper core extension wire.
• 【Low Power Design】- 9V replaceable battery power supply, standby for more than 1 year. When the battery power is low, the water sensor sound will become small or there is no alarm sound. Please replace the battery at this time.

User questions & answers

Question:	Some devices with 9v batteries run at 5 volts and the input is 5 volts. Is the input 5 volts or 9 volts
Answer:	I would think that a 9 Volt lithium would be safer than an alkaline. These water detectors are supposed to signal low battery life. But you have to hear it and in fact it has to signal. The extra money for the lithium is worth it. There is no reason not to use lithium.
Question:	OK for septic sump tank? Will the bits of stuff interfere with the sensor? Will it be too caustic
Answer:	Hi PF, Thank you for your interest in our water leak detector. The sensing contacts are two silver lines that curve around one side and end under the detector, allowing it to sense water at any level. You can see them in our images if you click in and zoom. I hope this helps. Have a good day! Best, Content Specialist Mindful Design
Question:	How much current can the sensors take to turn on something external to the alarm? What voltage is the alarm's input so an external thing won't hute it
Answer:	I have owned my only 1 week. It’s a 9 volt battery and my guess depends on the quality of battery and how often it is triggered or alarm sounding. I would guess that you should test it regularly and replace it when the low battery alarm sounds or 1 year, whichever is shortest.
Question:	Does the float hang by the wire into the water tank or does it have to be secured to something
Answer:	There are 2 small metal nodes that you can see on the outside in the picture. When moisture connects the 2 nodes the alarm sounds. I test these devices with a moistened finger, not much water at all. Very high humidity can trigger them as well, that is, humidity above atmospheric norm.

Product description

Water damage costs homeowners an average of $2,154, ranging up to nearly $6,000 (Source: Home Advisor). Help protect your home, apartment, office and belongings from water damage with this slim, modern Water Leakage Alarm, which detects water with an all-directional sensor.

 

At 110 dB, the Water Leakage Alarm is audible up to 600 feet (185 m) away to alert you when a leak or flooding have been detected. The piercing siren is coupled with a flashing red light for added convenience and maximum visibility. The water leak alarm also features a low battery test button to give you added peace of mind.

 

The consumer preferred, premium white alarm looks great inside your home! With no wiring needed, the alarm installs in minutes and work during power outages. Two AAA batteries are required (not included).

 

The Water Leakage Alarm was developed by SABRE, the #1 pepper spray brand trusted by police and consumers worldwide, meaning this product is extremely reliable. Backed by 40 years in the security industry, SABRE products are ISO 9001:2008 certified and must pass rigorous quality assurance testing before leaving our facilities to give you peace of mind.

 

Help protect your home from water damage today

• ATTENTION-GRABBING – 110 dB alarm helps wake/alert homeowner that a leak has been detected (audible up to 600 feet/185M away)
• USER FRIENDLY WITH MAXIMUM COVERAGE – flashing red light is activated when alarm is triggered for added convenience and easier visibility; detects water with an all-directional sensor
• ATTRACTIVE & CONSUMER-PREFERRED – superior to other home security products, this premium white alarm looks great inside your home
• EASY INSTALLATION – no wiring needed (requires 2xAAA batteries, NOT INCLUDED)
• EXTRA LEVEL OF SECURITY – provides battery status update with a low battery test button

User questions & answers

Question:	Can you make sensor wire longer, and details
Answer:	Hello, we do not have instructions or knowledge of how to lengthen the wire. The warranty will be voided if product is altered or tampered with. Thanks
Question:	how long will the batteries last (assuming it is rarely alarming
Answer:	Been around 6 months and it has gone off around 20 times and batteries are still a full charge. This is the loudest alarm I have for the price.
Question:	Is this magnetic or does it use adhesive to attach to appliances? The video says it's magnetic but the descripton says it uses adhesive
Answer:	The unit I have attaches via adhesive. Bottom Line: neither magnetic or adhesive makes any difference. You want the sensor to be as low on the ground as you can get it so it reads water at the first appearance. I used extreme tape over my sensor to force the unit to stay flat on the ground at the lowest point (my garage has a little dip in the cement floor). If you have magnetic and it causes the sensor to sit 1/8" off the ground, you will have a lot of water loss before the alarm goes off. An adhesive patch could also lift the sensor off the ground by 1/16" also.
Question:	Can the alarm be switched off once it goes off while you fix the problem
Answer:	Yes, the alarm has an off and on switch. You can remove it from the water, turn it off, and it will reset itself.

Product features

SABRE Water Leakage Alarm HS-WLA

Help protect your home, apartment, office and belongings from water damage with this modern and slim design. This alarm is triggered when leakage or flooding is detected. Requires 2 x AAA batteries (not included).

One of Choice of Law Enforcement Worldwide

This Water Leakage Alarm is from SABRE - Security Equipment Corporation, the manufacturer of the world's number one selling pepper sprays: SABRE 3-in-1 & SABRE Red. The brand most trusted by both law enforcement agencies and consumers, SABRE backs the most effective pepper spray with education and training to maximize personal safety. Increasing its offering of personal and professional safety products, SABRE is packaging its safety knowledge and experience into a new line of home security products. The simple DIY installation and affordable price points make SABRE's home alarms, both wireless and standalone models, a must have for any homeowner looking for an affordable way to protect their homes.

Easy and Practical DIY Installation

The SABRE Home Series provides effective products that require just seconds to install. Each product comes packaged with detailed instructions and images showing the DIY installation, complete with recommendations on where to place these items so they will be of the greatest benefit to the consumer. The Water Leakage Alarm works on nearly all surfaces.

SABRE Has the Highest Certifications

With the goal of providing the customers with a globally accepted and accredited quality management system, SABRE - Security Eqiupment Corporation recently renewed its ISO 9001:2008 certification. ISO 9001:2008 Certification, originally implemented in 2004, provides objective proof that Security Equipment Corporation maintains an effective quality management system - which improves product consistency, quality and overall organizational performance.

Product description

High water alarm featuring digital technology using the patented Mires field effect. Totally sealed fluid detectors are never in contact with water, will not corrode and are not affected by oil or debris. Bilge Alert detects water and sends a signal (3 seconds delay) to the alarm and switch conveniently mounted on a panel. Three way rocker switch allows switch to be tested, turned off and armed.

• The package length is 19.558 centimeters
• The package height is 9.906 centimeters
• The package width is 10.16 centimeters
• Package Weight : 0.6 pounds

User questions & answers

Question:	Does this alarm draw current when detection is enabled? How much
Answer:	The buzzer is rated at 85dB at five feet
Question:	What is the dimensions of the switch and the sensor
Answer:	Yes, ours came with a wiring sheet.
Question:	Can this be wired to turn on a bilge pump at the same time
Answer:	The LED light draws 5Ma (0.005 amp) so it is not likely it would ever affect your battery charge
Question:	Is the switch panel waterproof
Answer:	It is moisture resistant but not waterproof. Direct exposure to water or wash down is not recommended

Product description

In the U.S., water damage is the 2nd most frequently filed insurance claim and has accounted for more than $5 billion of claims each year in recent years. Property damage and monetary loss aside, a water-damaged property could also pose great health risks to its inhabitants, a truly nightmare scenario for homeowners. Thanks to the Instapark IN07A automatic water leakage alarm, a simple, inexpensive yet effective device, you now have a solution to minimize the risk of water damage and avoid its unpleasant aftermath.



Powered by a single 9V alkaline battery (included), the IN07A features a main alarm unit with a 130 dB siren connected together with a water detection sensor by a 44” long wire. When properly placed on the floor or any flat surface area to the monitored, the sensor will automatically detect any presence of water and trigger the main unit alarm to go off at 130 dB to alert the occupant to take immediate actions. Suitable locations to place the sensor include under-the-sink cabinet in a kitchen or bathroom, near a water heater, a sump pump, a toilet, a washer, a humidifier, an AC unit, or ice-making refrigerator. For added convenience, a bottom plate is included to help secure the sensor in place and lower the sensitivity if so desired. The main alarm is easily mountable as high as 44” above the floor, on a flat surface with either its built-in suction cup or included double-sided adhesive foam tape.



Specifications:



Power source: 9V x 1 (included)

Wire length: 44 inches

Dimensions: 2 ¾ X 2 ½ X 1 ¼ inches (main alarm unit)

Weight: 2.4 oz (without battery)

Battery life: 2 years minimum

Siren sound level: 130 dB

Minimum detectable water depth: 1/32 inches



What’s in the box:



IN07A water alarm, 3 of each

Bottom plate

Double-side adhesive foam tape pad

User instruction

Warranty registration

• 24/7 365 days automatic water leakage alarm is triggered when leakage or flooding is detected, a low-cost, simple, and effective device prevents property damage, monetary loss, health risks caused by water damage
• Powerful 130-dB alarm travels up to 100 yards, from end-zone to end-zone
• Advanced and sophisticated solid state circuitry ensures long-term sensitive and reliable operation
• Easy to remove, easy to clean double-sided adhesive foam tape pad included and built-in suction cup for easy attachment to an appliance
• 44-inch long wire extends far and beyond

User questions & answers

Question:	How to turn off the alarm? Is there a switch to turn off the sound
Answer:	22 USD because it ships from the US so it costs extra to ship it to .de
Question:	What gauge of wire is the cable. I will need to extend it about 20 ft. and would like to use the same gauge wire not bigger or smaller
Answer:	It will go off if you set it on a damp cloth, or your dampened finger. It does get louder the more water it detects.
Question:	Is it a constant, steady alarm, or does it "chirp/beep" repeatedly
Answer:	The batteries are not replaceable. An expiration date is printed on the device. Last years purchase says replace 3-2020.
Question:	what size battery do these take
Answer:	The product is NOT a one-time use product. If it sounds, just life the Flood Buzz out of the puddle, dry off the bottom and place to monitor for leaks again. This product is very simple to use.

Product description

WA9-04 AC/DC, (9-Volt) High or Low Water Alarm - 10 ft Float cord - Reversible by user to detect High or Low water condition - User Safe 9-Volt AC power, 9-Volt DC backup - 6 foot AC cable - std. 10 foot float cable - Easy conversion From high water to low water (switch 2 wires) alarm - 85 to 90 Decibel sound alarm - Reliable Non-Mercury float switch - Easy installation - Attachment strap included - Corrosion resistant ABS float - UL listed and CSA approved 9-Volt transformer and float system, 1 Year limited warranty. - Alarms approx 36 + hours on new quality battery

• WA9-04 AC/DC, (9-Volt) High or Low Water Alarm
• 10 ft Float cord
• Reversible by user to detect High or Low water condition
• User Safe 9-Volt AC power, 9-Volt DC backup
• 6 foot AC cable

User questions & answers

Question:	Is sensor a float or sensor
Answer:	Douglas, to further answer your question about putting the cables and conduit: we understand that in some installations the cables must be in conduit to comply to code. We connect those wires for you here at our factory to save Field installation time. The warranty is a three-year warranty where we replace any components that have failed, and in the event that that's not possible we will replace the entire unit. There is absolutely no problem with the warranty if the wires were disconnected and reconnected. Be sure that when you reconnect them that you cap Any unused wires. If you need any help reconnecting the wires, just contact us and we will be glad to assist you by phone or by email.
Question:	The Amazon power source shows "battery-powered" but it as AC power. Is the battery solely a back up or is that the primary source
Answer:	Yes. Although the pit has two pumps it has one water level. This unit monitors the water level and alarms when it is too high.
Question:	Is there any problem with splicing in a much longer float cable (maybe 100 feet
Answer:	Angie, thanks for your question. Yes, the unit will come with (2) stainless steel screws for mounting, (2) cable ties for the for float, and instructions on how to install the unit, which you can find at docs.sumpalarm.com/SW-120V-1L-R0114.pdf
Question:	with the note from a reviewer that it smell awfull can it be used for potable water
Answer:	Considering that this product is offered in a both a wifi and a non-wifi; - In the event that the pump trips the breaker, it will be evident from the power on light. - With a wireless unit, we use a patent pending health pulse system to notify the customer if power or internet is lost at the pump. Should you receive a notification that the unit is offline, one look at the power light will be the information you need to know if the breaker is tripped. Does this answer your question?

Product description

How it works



1: Plug the Wifi gateway into socket, pull out the water sensors battery insulating tab.

2: Download ‘Govee Home’ on App Store or Google Play to your cellphone.

3: Open the app and sign up with your email account.

4: Click the icon '+' at the top right corner and select H5040 device.

5: Follow the app prompt to connect your wifi Gateway with your router(not support 5G wifi).

6: Name each sensor like Basements, Kitchen Sinks, Water Heaters and put the water sensors on the detecting location.

7:Get email, Push notifications and alert on your smartphone when leak happened

• Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: Doesn't support 5G WiFi.
• Loud Alarm with Mute: If WiFi is not temporarily available, our 100dB alarm is loud enough to be heard. Press the Mute button to silence the alarm when you find the leak.
• Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location.
• Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max).
• IP66 Waterproof : The completely sealed IP66 waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	How can I add my devices? I deleted 2 sensors to get rid of a fault message and can’t get them back on my app
Answer:	Hello, This is a direct spark ignition.
Question:	I tried connecting with wifi several times as it indicated - I had next to my router with 2.4 G connection. Any help
Answer:	No it is not...It is actually made by HTP.
Question:	How far away can the gateway be? I have 3 floor house and need a sensor on each floor. Will that be a problem? Can you add more sensors
Answer:	Charge it for 1-2Charge it for 1-2 hours each time, and the indicator light above will remind you when the product is fully charged. hours each time, and the indicator light above will remind you when the product is fully charged.
Question:	how do I purchase additional sensors? I cannot find them - Govee B
Answer:	It is divided into two states: open and closed. It has two different colors divided into purple light and red light. Violet light can detect whether there is cat moss by illuminating the cat. The red light has five different patterns, which can be switched by the rotating button. Hope my answer can help you.

Product features

Govee WiFi Water Leak Detector

Using the connection between the gateway, water sensors, and Govee Home App, you can monitor any leakages on your phone while you are away from home. There are no annoying wires, which makes monitoring even easier. You can also name each WiFi water sensor according to their location on the App. When a leak occurs, the sensors will not only sound a loud alarm, but email and App notifications will also be sent to your phone. You can clearly know where the leakage happened and deal with it in time.

Open the App, Connect to H5040.

After downloading 'Govee Home' from the App Store or Google Play to your phone, please open the App and sign up with your email account. Then click the icon '+' at the top right corner and select H5040 device.

Press the Pairing Button for 3 seconds

Press the pairing button for 3 seconds until the red and blue light flash alternately and then input the WiFi password on your phone. Please note any special characters, blank spaces, and so on.

Connect Your WiFi Gateway

Follow the app prompt to connect your WiFi "Govee_Gateway_xxxx" with your router (doesn't support 5G WiFi). Place the water sensors in the detecting location and name each water alert .eg. basement, kitchen. Then you can begin to monitor the water leakage on your phone!

Monitor Water Leakage on Your Phone

After a successful connection, you can place the sensors and start to monitor water leakage on your App. Note: Please ensure the App and your phone settings are set to allow "push" notifications. The gateway will not send push notifications if the leak happens again in 90 seconds.

WiFi Gateway Supports Up to 10 Leak Detectors

Compared with others, our Govee WiFi gateway connection design has a stronger and more stable signal transmission. It works as a bridge to connect your WiFi with multiple water sensors. It receives the water leakage info from the sensors when leaking happens and sends it to the Govee Home App on your phone.

Loud Adjustable Audible Alarm with Sensitive Sensor Probes

Sensitive Sensor Probes: With 2 groups of water detector probes on the back and one group of probes on the front, the water alarm will swiftly notify you about any water pipe dripping.

Loud Adjustable Audible Alarm: Ultra-loud adjustable 0-100 dB alarm allows you choose a comfortable sound level to detect any water leakage when WiFi is not available in your home.

• 24/7 365 days automatic water leak alarm is triggered when leakage or flooding is detected, a low-cost, simple, and effective device prevents property damage, monetary loss, health risks caused by water damage
• Fully Automatic operation, no wiring required, no worry tugging on the wire accidentally to let you re-install again. simply place on the floor near potential water source; Requires a 9V Battery to operate (not including batteries). Battery-saver feature only uses energy when the alarm is sounding for a long battery life
• High sensitivity, two sensors at the bottom touch the water at the same time, the alarm immediately makes an alarm sound of 110 decibels, sounds up to 110DB can be heard throughout the whole house, and the flashing light also flashes at the same time
• Water leakage automatic sound and the light alarm has a large volume, is convenient and efficient for application. It is a new type of product with characteristics of high performance, low cost, small volume and good applicability. It is widely used in boiler house, ceiling, basement, bathroom, near the water tower, steam generator, washing machine, water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect
• Dismountable design, convenient and practical: Easy to install a battery with big battery compartment. It has waterproofing function and will suspend in water automatically if the water level is higher than the detector. It is entirely waterproofing designed with sealant filled inside

User questions & answers

Question:	If I put it on my boat bilge if gas leaks will it set it off with a boom lol
Answer:	I checked the current draw, there is less than 1ma while in the detection mode. When powered off, the meter indicated the same reading. I also verified meter function.
Question:	how do you turn it off
Answer:	Roughly the switch is 2x1 1/2” plus trim ring. The water detector is 3x11/2”.
Question:	Low battery alert
Answer:	No. You would place this above your primary automatic bilge as a warning for bilge pump failure.
Question:	How do you open this device to change the battery? they all work now but when i need batteries, i've tried all 5 and i can't get any of them open
Answer:	Probably not if it will immersed. It appears to be consistent with other panel-mounted mounted switches so is probably water resistant. Mine is mounted on a sailboat pedestal.

Product features

Water Leak Alarm - Protect your home/office away from water damage

• Never be surprised by a leak or flood again!
• Automatically goes off when water comes into contact with it allowing you to respond to leaks and floods quickly and prevent disastrous damage caused by unknown water exposure.
• Great for placing around water prone areas such as sump pumps, water tanks, water heaters, under sinks, dishwashers,burst prone pipes, or even under the sink.
• Economical way to defend against water leaks in multiple locations throughout the home