14 best tactical lights with usps

Product description

Ultra lightweight and compact, the TLR-4 Weapon Mounted Tactical Light with integrated aiming laser features the latest in C4 LED technology. The light provides 1.5 hours of continuous runtime when in dual mode with the high power visible laser. Rail clamp designed to rapidly attach/detach from side of weapon. Model for H and K USP Full Size frame. Case body is made from impact resistant Engineering polymer. Face cap is made using 6000 series machined aircraft aluminum with black anodized finish. Borofloat high temperature glass lens. Light source uses C4 LED technology, impervious to shock with a 50,000 hour lifetime. 5,000 candela peak beam intensity and 110 lumens measured system output. Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination. 640-660nm red laser provides long-range targeting. Optimized electronics provide regulated intensity. Ambidextrous momentary/steady On-Off switch. Three position Mode Selector switch for Laser only, LED illumination only or both Laser and LED. Run time is 1.5 hours regulated run time to the 10% output level for LED only or LED and Laser. Run time is 11 hours regulated output for Laser only. This model does not come with key kit.

From the Manufacturer

Ultra lightweight and compact, the TLR-4 Weapon Mounted Tactical Light with integrated aiming laser features the latest in C4 LED technology. The light provides 1.5 hours of continuous runtime when in dual mode with the high power visible laser. Rail clamp designed to rapidly attach/detach from side of weapon. Model for H and K USP Full Size frame. Case body is made from impact resistant Engineering polymer. Face cap is made using 6000 series machined aircraft aluminum with black anodized finish. Borofloat high temperature glass lens. Light source uses C4 LED technology, impervious to shock with a 50,000 hour lifetime. 5,000 c and ela peak beam intensity and 110 lumens measured system output. Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination. 640-660nm red laser provides long-range targeting. Optimized electronics provide regulated intensity. Ambidextrous momentary/steady On-Off switch. Three position Mode Selector switch for Laser only, LED illumination only or both Laser and LED. Run time is 1.5 hours regulated run time to the 10% output level for LED only or LED and Laser. Run time is 11 hours regulated output for Laser only. This model does not come with key kit.

• Ultra lightweight and compact
• C4 LED technology
• Ambidextrous momentary/steady On-Off switch
• One handed snap-on and tighten interface
• Serialized for positive identification
• This is a Class 3R Laser Product, 640-660 nm, Output <5mW

User questions & answers

Question:	what kind of battery does it use
Answer:	It is the disc type battery, Energizer #CR2032 I believe. But I have not had to replace mine yet, they seem to last a few years.
Question:	Has anyone mounted this laser on a Ruger SR9C or SR
Answer:	It mounted on my SR9C. The light stuck out about an inch from the barrel. I shot 50 rounds with no problems. Laser is nice and bright compared to my other lasers with the coin batteries.
Question:	Will this fit a full sized beretta px4 storm
Answer:	Yes,it has adapters to make it fit many different handguns. I have one on my full size XD45 tactical and it fits that gun like it was made for it, however, the fit is not as tight on my full size PX4 Storm. It can move around a little so the aim point will move under recoil. It comes with several adapters so you can probably make one fit using a dremel tool. Think I'll get another for my PX4 and grind it to fit. Great light. Battery last longer than I expected. If you get one you'll love it. Love it on my XD45.
Question:	Is this too big for xd subcompact
Answer:	I have a Springfield XDs .45 subcompact that it fits okay but extends into the muzzle blast. Has worked fine so far. I've had it several months and fired many rounds through it and when it was on a Glock 23c before. Hope this helps.

Product features

Streamlight 69242 TLR-4 Compact Rail Mounted Tactical Light with Red Laser

Designed for sub-compact and compact weapons, this compact tactical rail-mounted light features an integrated, visible green aiming laser optimizing brightness with a wide operating temperature range.

Ultra lightweight & compact, the Streamlight TLR-4 Weapon-Mounted Tactical Light with integrated aiming laser features the latest in wide temperature direct drive laser technology. The light provides over 1-hour of continuous runtime when in dual mode with the high power visible laser. The rail clamp is designed to rapidly attach/detach from the side of a weapon.

Streamlight's Powerful C4 LED Technology Leaves Other LEDs in the Dark.

C4 LED technology, impervious to shock with a 50,000-hour lifetime. Streamlight’s C4 LED produces brilliant, powerful, blinding light. The Streamlight-engineered reflector creates an intense beam that pierces the darkness, providing long run times and the indestructability of an LED combined with an increased level of brightness. It produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity.

Full Compatibility List for Streamlight TLR-4 69242 Tactical Light w/ Red Laser:

The Streamlight TLR-4 69242 is designed specifically for H&K USP Full Size Handguns. It will work with all 3 calibers of the H&K USP Full Size, 9MM, .40 S&W and .45 ACP.

This will NOT work on any handgun other than the H&K USP Full Size.

Product description

Ultra lightweight and compact, the TLR-3 Weapon Mounted Tactical Light features the latest in power LED technology and provides 1.5 hours of continuous runtime from a single lithium battery. Rail clamp designed to rapidly attach/detach from side of weapon. Case body made using impact resistant nylon polymer. Face cap made using 6000 series machined aircraft aluminum with anodized finish. Lens made with borofloat high temperature glass. C4 LED technology, impervious to shock with a 50,000 hour lifetime. 4,100 candela peak beam intensity and 90 lumens measured system output. Parabolic reflector produces a concentrated beam with optimum peripheral illumination. Optimized electronics provide regulated intensity. Ambidextrous momentary/steady On-Off switch. Run time: 1.5 continuous hours to the 10% output level. Extensively live-fire tested. Operating temperature: -40 to +120 Degree Fahrenheit. IPX7 rated design. waterproof to 1 meter for 30 minutes. Serialized for positive identification. Features a full USP clamp. Model for H and K USP Full frame. This model does not include key kit.

From the Manufacturer

Ultra lightweight and compact, the TLR-3 Weapon Mounted Tactical Light features the latest in power LED technology and provides 1.5 hours of continuous runtime from a single lithium battery. Rail clamp designed to rapidly attach/detach from side of weapon. Case body made using impact resistant nylon polymer. Face cap made using 6000 series machined aircraft aluminum with anodized finish. Lens made with borofloat high temperature glass. C4 LED technology, impervious to shock with a 50,000 hour lifetime. 4,100 c and ela peak beam intensity and 90 lumens measured system output. Parabolic reflector produces a concentrated beam with optimum peripheral illumination. Optimized electronics provide regulated intensity. Ambidextrous momentary/steady On-Off switch. Run time: 1.5 continuous hours to the 10% output level. Extensively live-fire tested. Operating temperature: -40°F to +120°F. IPX7 rated design. waterproof to 1 meter for 30 minutes. Serialized for positive identification. Features a full USP clamp. Model for H and K USP Full frame. This model does not include key kit.

• Ultra lightweight and compact
• C4 LED technology
• Ambidextrous momentary/steady On-Off switch
• One handed snap-on and tighten interface
• Serialized for positive identification

User questions & answers

Question:	Will this fit ruger ec9s
Answer:	I doubt it. This one is specifically designed for the clamp style mount proprietary to H&K. You may want to look up the TLR-1 or other lights that use the more standard picatinny style rail system.
Question:	Will this fit a Springfield XD 9MM
Answer:	No
Question:	Does it have a strobe function
Answer:	No, my light does not have a strobe function.
Question:	It will fit a h&k usp 9mm compact
Answer:	If it have a rail it should fit,fits my Sig Sauer p250 compact,smith and Wesson sd9ve an sd40ve the light comes with size keys the tlr-3 is a quality light look at the denfend-tek tactical light quality I have 2 a lot cheaper try it out fit any compact.

Product features

Streamlight TLR-3 Rail Mounted Tactical Light, Black

The Streamlight TLR-3 is a lightweight rail-mounted light, constructed of an impact-resistant polymer, and is designed to fit compact and sub-compact handguns. It also fits most full-sized handguns with rails on the market. Now shining brighter at 125-lumens!

Ultra lightweight and compact, the Streamlight TLR-3 Weapon-Mounted Tactical Light features the latest in C4 LED technology and provides 1.5-hours of continuous run time from a single lithium battery. The rail clamp is designed to rapidly attach/detach from the side of a weapon.

Available in basic model (69220), USP Compact Clamp (69221), and USP Full Clamp (69222).

Streamlight C4 LED Technology Leaves Other LEDs in the Dark.

Streamlight’s C4 LED produces brilliant, powerful, blinding light. The Streamlight-engineered reflector creates an intense beam that pierces the darkness, providing long run times and the indestructability of an LED combined with an increased level of brightness. It produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity.

Streamlight 69220 TLR-3 Tactical Light, with Rail Mounting Keys

Streamlight 69221 TLR-3 Tactical Light with Compact Clamp

Streamlight 69222 TLR-3 Tactical Light with Full Clamp

Full Compatibility List for Streamlight 69220 TLR-3 Tactical Light:

Beretta:

- 90two Key 'B'.

- Vertec Key 'B'.

- PX4 Storm Subcompact Key 'A' (Loosely front to back).

- PX4 Storm Subcompact Key 'D' (Gunsmith fit only).

- 92/96 Tick Adapter Key 'E'.

Glock:

- All Key 'C'.

Kel-Tec:

- PF-9 Key 'D'.

Kimber:

- TLE/RL II Key 'E'.

Ruger:

- SR-9 Key 'C'.

Sig Sauer:

- GSR Key 'E'.

- P200 Series (220, 2022, etc.) Key 'E'.

Smith & Wesson:

- TSW (with riveted rail) Key 'C'.

- 99 Key 'C'.

- M&P (all sizes) Key 'E'.

Springfield:

- XD (sub-compact) Key 'A'.

- Springfield XD Key 'A' (full-size frame with two grooves).

- XD KEY “C” (full frame with one locking groove).

- 1911 Operator Key 'E'.

Taurus:

- PT609 Pro Key 'A'.

Walther:

- PPS Key 'A' - P22 Key 'F'.

1913 Picatinny Rail:

- All Key 'E'.

This list represents only handguns checked by Streamlight.

The TLR-3/TLR-4 will fit many other guns with Glock or Picatinny style rails.

Product description

EM17 LS

Belt Rotating Tactical Holster

Fits Sig 226 / H&K USP Taurus PT 24/7 G2 Beretta PX4 Type G, C, D

Fobus International was the first holster maker to introduce molded injectedpolymer holsters into the market, contributing greatly to the firearms industry.Established by Chanan Har-Shen in 1978, starting out with leather holsters. Our holsters feature passive retention with rapid deployment.

Deliveries take between 14-21 business days!

• Fits Sig 226 / H&K USP Taurus PT 24/7 G2 Beretta PX4 Type G, C, D
• Constructed for maximum comfort, Light weight
• Durable, hardwearing & lightweight polymer construction
• Firearms remain firmly in holster
• Low profile and easy to conceal, 100% Lifetime guarantee

User questions & answers

Question:	Will this fit a Tuarus 24/7 g2 9mm? And also will it scratch up anything on the gun
Answer:	Had mine for a while will fit the gun no prob I haven't noticed any scratches
Question:	will it fit a Taurus 24/7 G2C compact
Answer:	each holster listed shows what type or size of gun it will fit
Question:	I have a taurus pt111 g2 9mm with a laser would it fix
Answer:	Greetings these holsters are tuff because whether you have a 9 mm or a 45 acp model holster is desigeded to hold the weapons slide tightly and when needed pull the weapon out fast a leather snap covers trigger . on end of pistol rail your reddot or ect. is exsposed . not sure there is a 9 mm model since I am use a Taurus acp45 pt24/7 ds. however since I been getting question about the 9mm if it fit it must be so have a great year
Question:	will this fit a HK P
Answer:	not sure

Product description

💥 Product Features and Benefits 💥

💪 Strong Metal Clip for Maximum Hold and Retention.

✔️ Safe, Easy and Comfortable to Use as Concealment.

🔍 Carefully Design for Resilience, Comfort and Protection.

💦 Sweat and Water Resistant.

🇺🇸 Design in USA and Handmade In Argentina.

🔨 Multiple Stitched for Strength and Durability.

⚙️ Reinforce Stocking & Nylon Borders.

🤠 ECO Leather Material.

🛡️ Soft Suede Lined Fabric Inside For Maximum Gun Protection and Durability.

⚠️ IWB - Inside The Waistband - Appendix Carry Model.

📏 Product Measures: 8.4" x 7" x 1".

👍 Fits:Glock 19 17 20 21 22 23 | Beretta 92 FS, PX4, XDM, H&K USP, H&K .45 Cal, Bersa Pro, FNH .45, Hi Point 9mm, .40, .45, SIG P230, SIG P250, SIG P320, 2022 Full Size, Ruger SR9 9mm, .40, .45, Ruger P95, S&W MP Full Size (With Laser or Flash Light)

💯100% Satisfaction Guaranteed

🛑 **** Refer to Diagram to pick correct Handling Size Holster **** 🛑

🛑 **** This is an Open Top Product**** 🛑

• ECO-Leather | IWB | Appendix Carry | Small of Back | EDC
• Design In USA | Imported From Argentina
• Strong Metal Clip Maximum Hold and Retention | Fits Glock 19 17 20 21 22 23 | Beretta 92 FS, PX4, XDM, HK USP (With Laser or Small Flash Light)
• Safe, Easy and Comfortable to Use as Concealment | For Belts up to 1.75" Wide.
• Lined Inside for Gun Protection and Durability **** This is an AMBIDEXTROUS PRODUCT ****
• Fits: Glock 19 17 20 21 22 23 | Beretta 92 FS, PX4, XDM, H&K USP, H&K .45 Cal, Bersa Pro, FNH .45, Hi Point 9mm, .40, .45 (With Laser or Small Flash Light)
• SIG P230, SIG P250, SIG P320, 2022 Full Size, Ruger SR9 9mm, .40, .45, Ruger P95, S&W MP Full Size (With Laser or Small Flash Light)

User questions & answers

Question:	Will this fit a Sig p320 m17 full size with Olight mini attachment
Answer:	Yes
Question:	Will it fit smith & wesson m&p9 shield
Answer:	Please use this model http://www.amazon.com/dp/B0795V57FL?ref=myi_title_dp
Question:	Would this fit full size colt 1911.45 with a laser sight in-front of trigger guard
Answer:	With the laser sight might be a little too snug but it shouldn’t be a problem without
Question:	will this fit a 5" full rail 1911 with the light mounted
Answer:	I’m running a Glock23 40 cal and Have the Big Beast of a Light the Baldr Pro with laser. Holds my Gun with light very well. It is a Soft holster keep that in Mind But honestly I use this Holster more then My Crossbreed 70$ holster just for the Fact it fits with Light attached

Product description

Item:Tactical holster



Type: can for right and left handed, adjustable as you likeColor: black,tan

Weight: 0.1-0.55kg

Fit for: handgun Universal

feature: Left/ right hand adjustble

suitable: with tacitcal light sight

Package include:



(According to the selected attribute) not include gun model.



1x universal holster



1x leg drop platform



1x belt paddle

• 1.Suitable for M9, glock 17,Colt 1911,P226,HK USP
• 2.Suitable for fitting all models of tactical light and laser sight.
• 3.Excellent interior design allowing perfect placement of the pistol inside the holster.
• 4.Designed according to field battle,meeting each individual needs,an be adjusted to suit the right-handed users or left-handed users.
• 5.Using durable nylon,polyurethane material.

• Package length: 1.3 cm
• Package width: 7.8 cm
• Package height: 20.7 cm
• Product Type:SPORTING GOODS

User questions & answers

Question:	Is this rail system compatible for the hk usp compact .40 s&w dimensions
Answer:	They have two versions, one for full size, and one for compact, they are different part #s. You can search on GG&G website to see which one you need.
Question:	How close is this to the surefire weapon light mount? Looking because holster reasons
Answer:	If the holster is meant for an HK specific mounted device, mounting this will cause the device to hang 1/8th of an inch lower.
Question:	Is this specifically for the full size usp and not the compact
Answer:	It's specific for the full size USP.
Question:	Amazon won’t let me review this product! Why
Answer:	Lmao

Product description

Lightweight and powerful, this super-bright light is designed for Sub-Compact and compact weapons, yet it fits the broadest array of handguns up to full size. Max Candela: 3,300

From the Manufacturer

Ultra lightweight and compact, the TLR-3 Weapon Mounted Tactical Light features the latest in power LED technology and provides 1.5 hours of continuous runtime from a single lithium battery. Rail clamp designed to rapidly attach/detach from side of weapon. Case body made using impact resistant nylon polymer. Face cap made using 6000 series machined aircraft aluminum with anodized finish. Lens made with borofloat high temperature glass. C4 LED technology, impervious to shock with a 50,000 hour lifetime. 4,100 c and ela peak beam intensity and 90 lumens measured system output. Parabolic reflector produces a concentrated beam with optimum peripheral illumination. Optimized electronics provide regulated intensity. Ambidextrous momentary/steady On-Off switch. Run time: 1.5 continuous hours to the 10% output level. Securely fits a broad range of weapons using key kit provided. Extensively live-fire tested. Operating temperature: -40°F to +120°F. IPX7 rated design. waterproof to 1 meter for 30 minutes. Serialized for positive identification. Includes Rail Locating Keys for to fit a wide variety of weapons. Lithium battery. Boxed.

• White light illuminator
• Uses Lithium batteries
• Includes rail locating keys for Use with Picatinny or Glock style rails
• IPX7 waterproof to 1 meter for 30 minutes
• Runs 1.5 continuous hours to the 10% output level.Battery Type:CR2 Lithium

User questions & answers

Question:	Bo Staff? Can I mount this on a bo staff so I can fight ninjas in the dark
Answer:	I can see the usefulness of this with a bo staff. The ninjas will mistake it for an ordinary flashlight but little do they know that it's attached to a fighting stick!
Question:	Have you fired this with the light on? Did it stay on? (I had a cheaper light, first time I fired it, light went out and never came back on
Answer:	Mine is on a Canik tp9 Elite, put 250 rounds of target and defense loads downrange. Light stayed tight, didn't mess with balance, no pistol frame flex, and no difference in cycling. Just hand tightened it with a nickel and some loctite. First 150 rounds with light off to confirm it stayed secure, last 100 rounds with lights on to confirm bulb did not flicker when firing. In my opinion best simple weapon light at this price point!
Question:	Will this fit a springfield xd 40 s&w
Answer:	Absolutely. Have one on an xd40sc. Works great. Good fit. Well placed controls. If you are putting this on a service size model, the fit will be that much more improved.
Question:	I have an HK USP 9mm, will this light fit on the proprietary rail
Answer:	The price sheet on the Streamlight web site lists two version for H&K. 69221: TLR-3, H&K USP Compact and 69222: TLR-3, H&K USP Full Size. Check out page 48 of the price list at http://www.streamlight.com/documents/rpl/13_rpl.pdf.

Product features

Streamlight TLR-3 Rail Mounted Tactical Light, Black

The Streamlight TLR-3 is a lightweight rail-mounted light, constructed of an impact-resistant polymer, and is designed to fit compact and sub-compact handguns. It also fits most full-sized handguns with rails on the market. Now shining brighter at 125-lumens!

Ultra lightweight and compact, the Streamlight TLR-3 Weapon-Mounted Tactical Light features the latest in C4 LED technology and provides 1.5-hours of continuous run time from a single lithium battery. The rail clamp is designed to rapidly attach/detach from the side of a weapon.

Available in basic model (69220), USP Compact Clamp (69221), and USP Full Clamp (69222).

Streamlight C4 LED Technology Leaves Other LEDs in the Dark.

Streamlight’s C4 LED produces brilliant, powerful, blinding light. The Streamlight-engineered reflector creates an intense beam that pierces the darkness, providing long run times and the indestructability of an LED combined with an increased level of brightness. It produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity.

Streamlight 69220 TLR-3 Tactical Light, with Rail Mounting Keys

Streamlight 69221 TLR-3 Tactical Light with Compact Clamp

Streamlight 69222 TLR-3 Tactical Light with Full Clamp

Full Compatibility List for Streamlight 69220 TLR-3 Tactical Light:

Beretta:

- 90two Key 'B'.

- Vertec Key 'B'.

- PX4 Storm Subcompact Key 'A' (Loosely front to back).

- PX4 Storm Subcompact Key 'D' (Gunsmith fit only).

- 92/96 Tick Adapter Key 'E'.

Glock:

- All Key 'C'.

Kel-Tec:

- PF-9 Key 'D'.

Kimber:

- TLE/RL II Key 'E'.

Ruger:

- SR-9 Key 'C'.

Sig Sauer:

- GSR Key 'E'.

- P200 Series (220, 2022, etc.) Key 'E'.

Smith & Wesson:

- TSW (with riveted rail) Key 'C'.

- 99 Key 'C'.

- M&P (all sizes) Key 'E'.

Springfield:

- XD (sub-compact) Key 'A'.

- Springfield XD Key 'A' (full-size frame with two grooves).

- XD KEY “C” (full frame with one locking groove).

- 1911 Operator Key 'E'.

Taurus:

- PT609 Pro Key 'A'.

Walther:

- PPS Key 'A' - P22 Key 'F'.

1913 Picatinny Rail:

- All Key 'E'.

This list represents only handguns checked by Streamlight.

The TLR-3/TLR-4 will fit many other guns with Glock or Picatinny style rails.

Product description

Custom made OWB Kydex Holster

• .080 Kydex (OWB) Outside the Waistband
• Fits the above gun models with Streamlight TLR-4 light attached.
• RMR & MOS Compatible - Our light bearing holsters have clearance for most slide mounted optics.
• 100% Made in the USA
• One Year Replacement Warranty - Items may have internal draw marks from the molding/fitting process but all items are brand new

User questions & answers

Question:	Will the XDM with the 4.5" barrel fit with this holster
Answer:	Hi, I am 5'8", but weigh 175 with a 32-33" waist. I had to tighten the shoulder straps to the maximum, and the belt loop pretty tight to fit. The only difference is I added the condor hydration pack to it so the fit rides higher on me. The swivel clips do not even support at this time.
Question:	Will this fit xd 40 subcompact with tlr-4 light
Answer:	Its front and back adjustable straps can be increased to reach 28 and 1/2 inches from the shoulder padding that sits on the shoulder to the bottom of the M.O.L.L.E. webbing. With some adjusting on the rear waist strap, I measure approximately 49 inches (including the buckle length) as the max you can increase it to. I can't give you an answer with that but hope it will help you with deciding it yourself.
Question:	Is this compatible with the blade tech Molle tek attachment
Answer:	We do not allow to sell any tactical gear out of US due to Amazon policy and Federal issue.
Question:	Will this fit ruger 5.7 with tlr
Answer:	I added a triple M4 mag pouch to one side, but you could add one to each. If you wanted you could do a 6 mag pouch, but I feel like it would be in the way. You could also add a 3 or 6 mag on the back for teammates to pull from.

Product description

AIM SPORTS

User questions & answers

Question:	Will this fit xds
Answer:	Should. I’m 6’0”, 230. Best I remember there’s a good amount of adjustment both ways from me. Seems a good product for the price.
Question:	Just bought hubby the gen 4 Glock 23. Will this fit well on that
Answer:	It fits a 44 inch waist. It will also adjust to fit a 48 inch belly too.
Question:	Hi does this fit a Sigsauer P220 and P
Answer:	It will fit 7.62mm FN/FAL magazines
Question:	will this fit on an M&P40compact? I have a full size M&P40 with a light on it, but that light will not fit on the compact because the rail is smaller
Answer:	No.

Product description

The Viridian CTL is so tiny, it tucks neatly between trigger guard and muzzle, with no overhang, and will work with virtually any railed gun. CREE LED Tactical light with up to 140 lumen output. Combined with the TacLoc ECR Instant-On Holster- the package is complete- batteries included. Drawing the Viridian from the TacLoc ECR- Instant-On holster releases it smoothly and instantly ignites your light automatically, the second you draw. It's the most advanced, most effective carry setup you can get. The complete package for your favorite gun.

• Battery Life - 1+ hour on constant, 2+ hours on strobe
• Construction - High strength Zytel polymer
• CREE LED with up to 140 lumen light output
• Activation - Automatic activation w/ ECR and User-defined operating modes.
• Radiance Combat Optics provides additional light output where you need it most and doesn’t waste light on the floor or ceiling
• Universal mounting system, three modular rail sets included.
• Ambidextrous activation and easy custom operating modes for strobe rate and light output.

User questions & answers

Question:	will this light fit a springfield xd mod2 subcompact 9mm with 3" barrel
Answer:	I have a C5L on both my XDmod2 9mm and .45acp... I think they're same size, just one has laser while other doesn't...
Question:	made in usa
Answer:	Yes. According to the packaging, it's "Designed and Built in the USA".
Question:	fits m&p 22 compact
Answer:	Any railed gun. It comes with three different sized rail adapters to fit any railed handgun.
Question:	features" section lists it's weight at 2.4oz, but "product info." shows "item wght." (not "ship. wght.") at 7.2oz. which is correct
Answer:	The unit weighs 2.4 ounces with the battery.

Product description

Specification:

★Lumen: Hign Option: 300lm ; Low Option:150lm

★Working mode: High lumen/Low lumen/Strobe

★Dimension:LxWxH=2.7inx1.2inx1.2in( 69.5x30x31.5mm)

★Weight (net): 3.2 ounce(90g)

★Battery type: Build-in Rechargeable Battery

★Battery Runtime: High:1H/Low:1.3H/Strobe:2H

★Material: Fiber Reinforced Nylon PA66



Operation:

Master Switch

1. Single press master switch to turn on or off the device.

2. Under activation status, hold push button for 2 seconds to transfer the LED working mode, high lumen or low lumen option;Press twice quickly to enter the Strobe option.

Ambidextrous Switches

Both sides push button switches can turn on or off the device; under strobe function, push button switches to cancel strobe function.

Ambidextrous Switches

As illustrated in Figure 1,connect the magnetic head to Charging Socket, two parts will adsorb automatically Working. Indicator Instruction



Charging Battery:

As illustrated in Figure 1,connect the magnetic head to Charging Socket， two parts will adsorb automatically Working.

Indicator Instruction

Charging Indicator

1. After connecting the charger, red indicator shows the device is under charging process.

2. Once the charging finished, the indicator will turn to green.

3. Remote the charging cable, the charging indicator will turn off.

Power Indicators

1. Every time activate the device, the power indicators will show power capacity for 10 seconds, then turn off automatically.

2. If the last indicator starts to strobe, the device should be charged ASAP.

Additional notes:

★Make sure at least 1.46" space between the rail groove and the trigger guard

★Compatible with Picatinny and Weaver rail

★Feel free to contact us if you have additional question

• Laspur's independently designed products, Three working options （Hign Option: 300lumen ; Low Option:150 lumen; Strobe.）, It gives you more choices
• smart switch design. Main switch control working options, long press to switch function . The switches on both sides can control the ON/OFF of the gun light
• Low profile, light weight and tough design. Sleek and compact design looks great with all firearms and will easily accommodate most universal holsters.
• Build-in battery with magnetic USB charging port. Super convenient USB Magnetic Contact Charging, which solves the problem that the existing USB plug can not access the USB interface in night or dim light environment. Magnetic recharging allows for you to conveniently keep the product mounted to the gun while charging. The battery indicator can prompt the remaining power at any time to avoid the inability to use the product due to insufficient battery power.
• Three bolt Picatinny mount holds to fit more pistols, Will not loosen due to vibration

User questions & answers

Question:	will this fit a CZ P10F
Answer:	No. This multifunctional tool pen is made of metal, so it is very solid and endurance. If it were made of plastic, it would be easily damaged, so you don't have to worry about this. The screwdriver heads are also made of strong metal, it is nice to count on it when I need it, and I carry it wherever I go.
Question:	Is it defected if it doesn’t hold a charge or is that the way it’s made
Answer:	It came with the adapters to hook straight to my iotv or any plate carrier also comes with the y harness to use it as a stand-alone rig
Question:	Will this work on a walther pk
Answer:	It should fit but it isn’t suppose to go around the waist it’s meant to be around belly button area. As for the mags, it’s meant for Ar 15 mags but you can always attach pouches to the outside to accommodate your mag size or mission dictated need
Question:	Will this fit s&w9ve
Answer:	Yes, it will fit any aluminum 30rd AR15/M16 magazines.

Product description

The TLR-8 A G includes customized ambidextrous on/off rear switch in either a Low or High option to match your Shooting style. It features a rail clamp that is designed to rapidly attach/detach from side of compact and full frame weapons. Uses one CR123A lithium battery included, safe off feature on bezel prevents accidental activation, saves batteries. Securely fits a broad range of full-sized and compact guns and Durable, anodized machined aluminum construction. Features white LED and green laser with 500-Lumens; 140m beam; runs 1. 5 hours (light only or light/laser combo). And 510-520nm green laser runs 11 hours. It meets applicable European Community Directives. Dimensions: length: 2. 58-Inch (6. 55 cm); width: 1. 18-Inch (2. 98 cm); height: 1. 50-Inch (3. 81 cm). LASER/LED RADIATION; AVOID DIRECT EYE EXPOSURE. CLASS 3R LASER PRODUCT 510 - 530 nm, OUTPUT <5 mW.

• 500-Lumens 140 meter beam runs 1.5 hours (light only or light/laser combo); 510-520nm green laser runs 11 hours
• Ambidextrous on/off rear switch in either a low or high option
• Uses one CR123A lithium battery included; Safe off feature on bezel prevents accidental activation and saves batteries
• Durable, anodized machined aluminum construction; user enabled strobe function
• Securely fits a broad range of full-sized and compact guns
• Laser/led radiation; avoid direct eye exposure. Class 3r laser product 510 - 530 nm, output <5 mw

User questions & answers

Question:	Does this fit on a Glock 19 Gen
Answer:	Yes
Question:	New to light/laser combo. what tool do you use to zero laser? only came with allen wrench. does not fit up/down slot
Answer:	Please check with the seller. You should have gotten two Allen wrenches. I got one for tightening the mount for the rail and a slimmer one for zeroing the laser so you can adjust the up and down slot.
Question:	Aligned for 21ft. as tight as i dare make it. after 50 rounds it is loose and 6” off the mark. gunsmith next
Answer:	What type of firearm is it mounted to and what type of rail? I issue these on duty pistols (.40 caliber none the less, which has a notoriously snappy recoil) and have never had an issue with them coming loose on the range.
Question:	Will this fit a Sarsilmaz Sar
Answer:	Yes

Product features

Weapon Light with Two Switch Configurations

This rugged lithium battery powered LED weapon light fits most hand guns and long guns. The daylight visible green targeting laser uses a direct drive diode that burns brightly in extreme temperatures.This light/laser combo features a fast rail clamp for rock solid repeatability on a wide variety of weapons.

Rail Clamp System:

Rail grip clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of muzzle. Securely fits a broad range of full-sized and compact guns using the key kit provided. Its low-profile design prevents snagging.

HIGH POWER LED FOR EXTREME BRIGHTNESS

White LED delivers a powerful beam with extensive range and selectable strobe mode. Custom TIR optic for concentrated beam with optimum peripheral illumination. Optimized electronics provide regulated intensity. 510-520nm Direct drive green laser with wide operating temperature.

• White LED:
  • 500 Lumens
  • 5,000 Candela peak beam intensity
  • 140 Meter beam
• Run Time:
  • LED only or LED/Laser Combo: 1.5 Hours
  • Laser only: 18 hours

LOW-PROFILE, RAIL-MOUNTED TACTICAL LIGHT

• Body and Facecap: 6000 Series machined aircraft aluminum with black anodized finish.
• Switch housing: Impact and chemical resistant engineered polymer.
• Lens: High temperature, shock mounted, impact resistant Borofloat glass.

ON/OFF SWITCH:

Rear switches left and right of trigger guard provide ambidextrous operation available with high and low actuators. Double tap either switch within 1/4-second activates strobe.

COMPATIBILITY LIST: Streamlight TLR-7 & TLR-8 Keys

Product description

Feature

The PL-MINI 2 Valkyrie is the world's first compact rechargeable tactical flashlight with an adjustable rail, which the user can adjust to any length making it compatible with most pistols.

It delivers a maximum output of 600 lumens and a beam distance of 100 meters. With a quick attach and release mounting system, the install and removal can be finished within one second.

The switches are conveniently manipulated simply by pressing down quickly for constant on/off or hold for momentary-on.

The PL-MINI 2 is powered by a built-in polymer battery, which can be charged through our signature magnetic charging port located at the bottom of the light.

With high compatibility, quick attach/release mounting system, and huge performance; the PL-Mini 2 is the optimal tactical flashlight choice for concealed carry.



Specification

Light Source: CW LED

Body Material: AL6061-T6 aluminum alloy

Dimensions:

Length: 2.07 in /52.5 mm

Width: 1.26 in / 32 mm

Height: 1.28 in / 32.5 mm

Weight: 2.57 oz/ 73g

Battery Source:

Polymer Battery (Built-in)

Note:The adapter labelled GL is already installed, which can be directly installed on GL handguns. For firearms using 1913 rails, the user needs to replace the GL adapter with the included 1913 adapter using the screws and socket head wrench provided in the package.



Output and Runtime

Output: 600 LM~60 LM ---1min+60 min---100m---2500cd

* Waterproof:IPX6

* Impact Resistance(m):1 meters



Warranty

2 Year Warranty



Package Content

PL-MINI 2 x 1

1913 Rail Mount x 1

T6/T8 Socket Head Wrench x 1

Magnetic Charging Cablex 1(Special edition ,not compatible with other Olight flashlight)

SKYBEN Battery Casex 1

• AL6061-T6 aluminum alloy
• Adjustable rail(authorized patent): Slide the rail adapter back and forth freely to fix the light in the desired position for your specific firearm, making the PL-MINI 2 compatible with most pistols.
• Huge performance: 600 lumens with 100 meters of throw. Performance comparable to mid-sized tactical lights.
• Convenient charging by connecting the light directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time.
• Compatible with both GL (insert already installed) and 1913 sized rails (insert included in the package).
• Quick install and removal within one second. Ultra-compact and lightweight.Two colors available:black and desert tan.

User questions & answers

Question:	will i need additional hardware to install the light to my S&W m&p 380 shield
Answer:	Grip and pull the twisting silver tip. It will give you a little resistance, but should pull right out. That will give you access to the ink cartridge, which screws in and out. You can purchase replacements at any local office supply, or here on Amazon!
Question:	Would this fit a Sig P
Answer:	While twisting the tip of the pen in order to normally engage the ink (the rough tumbler near the tip), pull that rough tumbler away and apart from the tube/measuring area. It is only held together by friction. You can then unscrew the ink refill from inside the tumbler and push it all back together.
Question:	Will it fit the hellcat
Answer:	Pull the bottom silver portion out of the yellow housing with with a twisting motion. This bottom part has the ink cartridge in it. Afterwards, unscrew the plastic top from this lower silver colored part which will unscrew the old ink cartridge. Replace with the new one you have bought and screw the new one in to lock. Lastly, push the bottom silver piece back into the yellow housing.
Question:	I have a walther p99as gen2. i previously bought an olight pl-mini valkyrie. the locking pin will not align properly. will this unit work
Answer:	No, it is a pen only.

Product description

Ultra lightweight & compact, the tlr-7 weapon-mounted tactical light features the latest in C4 LED technology for high lumen operation and provides 1.5 hours of continuous runtime from a single Lithium battery. Rail clamp designed to rapidly attach/detach from side of weapon.

• Body and face cap: 6000 series machined aircraft aluminum with black anodized finish
• C4 LED technology, impervious to shock with a 50,000 hour lifetime; Borofloat high temperature glass
• 500 Lumens, 4,300 Candela peak beam intensity and 131 meter beam distance
• Custom TIR optic produces a concentrated beam with optimum peripheral illumination; Optimized electronics provide regulated intensity
• Left and right side switches provide ambidextrous operation; Quick press for constant on operation and press and hold for momentary operation; Assembled in USA

User questions & answers

Question:	Will this light fit flush on a glock 19? i wear iwb and want a good light but a low profile light that won't snag
Answer:	I would say so. From pictures I have seen- it looks flush. And you can get a custom holster to fit the light as well.
Question:	Will this mount on my hk usp compact
Answer:	No, you need the TLR-3 with the USP Compact bracket.
Question:	Will this fit a glock
Answer:	Yes. Should fit any med-large framed glock. It won't fit anything like the Glock 43 or 26. I put it on my Glock 19 Gen4 and it fits it perfectly.
Question:	How well does it fit on a glock
Answer:	Perfectly flush

Product features

Streamlight 69420 TLR-7 Gun Light With CR123A Battery & Rail Locating Keys

The TLR-7 securely fits a broad range of full-size and compact handguns. Low-profile design and side switch prevents snagging and a “safe off” feature prevents accidental activation, saving batteries. 500 Lumen output delivers a powerful beam with extensive range, and good peripheral coverage. Rail grip clamp system features a one handed snap-on and tighten interface to keep hands away from muzzle when attaching or detaching. Securely attaches/detaches quickly and safely with no tools.

Streamlight is a "hands-on" company, We Listen. We Learn. We Get It.

We have since the company started in 1973, 46 years ago. We learn by doing, we understand what our customers need because we're out there doing what they do, using the same lights in the same ways. We go through firefighters' training. We take courses in low-light shooting. We're hunters, fishermen, outdoor and sports enthusiasts. We believe it's our hands-on, real-world experience that leads to new ideas and innovations that set Streamlight apart. Who knows what we'll come up with next?