12 best well submersible pumps

Product description

1HP, 230V/60HZ/1PH, 7 stage, 30 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4 NPT discharge. Warning: This is 220V pump! Specifications: 4" deep well submersible pump. 1 HP, 230V, 5.1 Amps, 7 stage, 1-1/4 NPT discharge Industrial grade heavy duty, also good for home usage Fits a 5" or larger well casing. For 4" casing, use pump MA0460X-9A, or MA0459X-14A; Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps. Water temperature: (32 113of) Trans mediums Ph.: 6.5 8.5 Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance. High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start. Built in control box. This pump DOES NOT require an external control box! This pump uses high quality UL approved motor, UL file No.: E233961 This is a 2 wire pump (2 wires + ground wire) 10' long electric cord included. Heavy-duty thermoplastic impellers, diffusers, and intake screen. Built in check valve included. Submersible design creates quiet operation Unique design reduces its noise. 207 feet max head is for open water tanks. Refer to the 'Pump Selection Guide' for the pressure tank applications. User's manual included and installation tape kit included. Warranty: 12 months limited manufacturer's warranty

• American company
• Pump, Deep Well Submersible Pump, 1HP, 220V 60HZ, 30 Gpm, Stainless Steel, for 4" or bigger well, long life
• 2 wire pump with built in control box- DOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection
• Submersible Pump

User questions & answers

Question:	Well is 300 feet deep will this pump and electrical cord work
Answer:	I used this pump for less than 75 ft well. Pumps good with great pressure.
Question:	Will this pump work in a 4" ID well casing
Answer:	It should. But if you have rust or dirt built up in the casing, the casing size maybe less than 4" which may cause problems for the pump.
Question:	Does the hallmark ma0414x-7a deep well pump come with electrical cable
Answer:	The cable is about 6 feet long that comes attached to the pump. You can get the electrical splices and the wire you need to complete the installation from Home Depot.
Question:	How long is the electrical cable that comes with the pump
Answer:	The electrical cable that is integral to the pump is a few feet long and can be spliced to the electrical line going back to the power box. I believe it was ~6ft. long. In the spirit of too much information: The splice technique I used was to get a submersible splice kit (available on Amazon or Lowe's). It comes with the splices and a special heat shrink tube that has a rubberized coating that oozes out when it is shrunk over the splices. I also covered the splice with 3M type 33 black tape as an added insurance policy. This tape is putty-like and bonds to itself when wrapped. I also used the 3M tape to cover all of the barbed fitting/hose clamp plumbing joints and the cast housing of the pump. The pump has been in for several months and works like a champ. You will not be disappointed with the quality and performance of this pump.

Product features

Hallmark Industries MA0414X-7A Deep Well Submersible Pump, 1 hp, 230V, 60 HZ, 30

This is 220V (230V) pump. Does not work for 110V (115V).

Product description

Hallmark Industries MA0419X-12AEXT pump, 4 inch deep well submersible, 2 HP, 230VAC/60Hz/1pH, 35 GPM max, stainless steel, with control box

Features & Technical Specifications:

* 4" deep well submersible pump. Fits 5" or bigger well casing (will not fit 4" well casing).

* 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge.

* Industrial grade heavy duty, also good for home usage.

* Patented impeller & 12 stage unique design provide a much longer pump life than other brands.

* 35 GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.

* 400 ft is total water head.

* Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5

* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.

* Hermetically sealed motor has thermal protection to prevent overheating, for longer life and powerful start.

* This pump comes with a starter box (control box).

* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy

* This is a 3 wire pump with ground wire (total 4 wire)

* 10' long electric cord, installation tape & electric tape kits are all included in the package.

* Heavy-duty thermoplastic impellers, diffusers, and intake screen.

* Unique design reduces its noise.

* User's manual included. Free technical support available during your installation.

* This pump has a built in check valve. However installing additional check valves is required.

* Shipped with pump head and motor separately. Assembly required.

User questions & answers

Question:	What is the gpm and psi ratings on this pump set at 300' deep
Answer:	If the water level is 300', the max psi the pump can produce is 43 psi. Please note it is based on the water level, not where the pump is. At max psi the flow is 0 gpm. At 300' water level with no pressure, the flow is about 15 gpm. Thank you.
Question:	Do you have a 3/4hp, 220 volt 4" deep well pump
Answer:	Yes. The part # is MA0459X-14A by Hallmark Industries Inc. Thank you.
Question:	Can you upgrade control box? If so, what type/size did you upgrade to
Answer:	The control box contains a starting capacitor which is designed to match the pump. So you can not change the control box. Thank you.
Question:	Do you have 3" 110 volt with 1" outlet box built in
Answer:	Yes. This is the link: https://www.amazon.com/Hallmark-Industries-MA0459X-14-S-Shell-Stainless/dp/B07BPFJ9BQ

Product description

Ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells to depths of 250'.

From the Manufacturer

This submersible deep well pump is ideal for 4-Inch I.D. or larger wells. It features a built in check valve, 12-GPM and built in suction screen.

• Powered by industry standard 2- or 3-wire motors
• Thermoplastic discharge and motor bracket
• Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP)
• Built-in suction screen and check valve
• 12 gpm and 22 gpm models available

User questions & answers

Question:	One reviewer uses pressure switch on this pump. How much maximum pressure this pump can produce? Thanks
Answer:	The pump works very well. I have seen pressure as high as 85 psi. This is not recommended as it could cause pipes to burst. Set presser switch to 60 cut off, 40 to cut on.
Question:	My well is 385 ft with the pump at 100ft and a 30/50 switch on the pressure tank. Will this half hp pump work for me
Answer:	I think you would be happier with a bigger pump, but check out the charts on the Red Lion website "http://redlionproducts.com/cleanwater/4-submersible-well-pumps/" and call their tech hotline at 888-885-9254. Their techs are very knowledgeable and willing to help you get the right size of pump. If you don't get it sized right for your application, you will be cussing yourself down the road.
Question:	where is it manufactured
Answer:	Red Lion pumps are made in the USA per my research on the web.
Question:	Can this pump lay horizontal, in my cistern
Answer:	I don't really know,to say yes.I've only seen one,cistern here in Maine.It was in the cellar of an old Farmhouse I was remodeling.Made of brick.Is yours not deep enough to go vertical?What I can tell you,is my pump is in a 250 ft drilled well installed myself.common practice here is to install a rubber boot made for submersible pumps that keeps the pump from banging against the well casing when starts/runs.So i would think unless the pump is really secured horizontal,it could damage something pipe,connectors,ect..But Im not a professional plumber.Gould makes cistern pumps.You can find some on this website,www.rainstormsolutions.com.Hope I helped a little.

Product features

Red Lion Submersible Deep Well Pump

Ideal for the supply of fresh water to rural homes, farms, and cabins that have 4" and greater diameter drilled wells to depths of 250'.

Built-in check valve prevents backflow and ensures system pressure.

The Red Lion Story

Backed by the heritage of a global leader in the development and manufacturing of systems and components that move water, the Red Lion brand remains at the forefront of product innovation by listening to its customers, adapting to the market, and continuing to invest in research and development. This innovative product portfolio is supported by unparalleled service to provide you with current solutions to your water pumping challenges.

Product description

Specifications:

4" deep well submersible pump. This Pump will fit in a 4" well casing.

1 HP, 115V, 10.3 Amps, 1-1/2” NPT discharge. 207 max head.

Industrial grade heavy duty, also good for home usage. Heavy duty motor. Unit weighs almost 40 lbs.

207 max head is to an open tank. For pressure tanks, buyer MUST read the Selection Guide!

impeller & UL approved motor designs ensure extra long pump life, great flow and head.

Shell, motor shaft are made with stainless steel to ensure corrosion resistance.

High quality sealed ball bearings guarantee its excellent performance.

Hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.

WITH external control box!

This pump uses high quality and high efficient approved motor, and uses less energy

This is a 2 wire pump with 3-Wire (2 wires + ground wire)

33' long electric cord comes with this submersible deep well pump.（all of our cords are connected with 110V US standard plug）

Heavy-duty thermoplastic impellers, diffusers, and intake screen.

High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.

This pump has a built in check valve.

Unique design reduces its noise.

Installation user's manual are included.

• 4" deep well submersible pump. 1HP, 110V, 10.2 Amps , 1-1/2” NPT discharge. Fits in a 4" casing.
• 33GPM max & 207ft head are greater than almost all other 1HP well pumps, and comparable to other pumps, but uses less electricity.
• 100' / 30M long electric cord comes with this submersible deep well pump.
• Witn external control box! (NOTICE: pump and control box will be delivered in seperate packages)

User questions & answers

Question:	Does the control box come in a seperate package
Answer:	I really do not know if they have deceived me because the pump I bought does not have that control box

Product description

Product Description:

Only requiring a borehole of 100mm, your Submersible Pump minimises the work needed to reach the water. And once you get there, you're set. Manufactured from stainless steel and cast iron, your Submersible pump is a durable workhorse that will keep you in flow for years to come. So order the Pump and increase your liquid assets today!

 

Feature:

4" deep well submersible pump, fits in the 4" well casing.

42m/138ft max head, 22GPM Max flow, 7 impellers to provide stable and remarkable performance.

Stainless steel body. Industrial grade heavy duty, also good for home usage.

Built in built-in capacitor. This pump DOES NOT require an external control box!

High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.

66FT long electric cord comes with this submersible deep well pump.

Class-leading flow rate.

Heavy-duty thermoplastic impellers, diffusers, and intake screen

This pump has a built in check valve.

Highest quality stainless-steel housing.

 

Specifications:

Motor: 0.5HP /0.37KW

Voltage: 110V / 60Hz

Diameter: 4"

Internal thread diameter: 1.25"

Max flow: 6 m³/h 22GPM

Rated Flow: 2 m³/h 7.3GPM

Rated Head: 33m / 108ft

Max Head: 42m / 138ft

Rev: 3450RPM

Phase: Single

Number of impeller: 7

Stainless steel Outlet: 1.25"

Water PH: 6.5-8.5

Max Ambient Temp: 7° C

Max Fluid Temp: 40° C

 

Package Content:

1 x Submersible Bore Water Water pump

1 x 20m(66ft) Cable

1 x User manual

• ESSENTIAL PARAMETER: Submersible Pump voltage: 110V 60HZ; The length of cable?66ft;applicable well diameter: 100mm / 4 inch; power: 0.37KW / 0.5HP; Pump flow: 22GPM; Pump impeller: 7PCS; Pump highest head: 138ft.
• CONVENIENT OPERATION: Deep well pump with 66ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room.
• EXCELLENT PERFORMANCE: Stainless steel body, a built in check valve?unsealed?, can be mounted vertically, Industrial grade heavy duty, also good for home usage.
• APPLICABLE CONDITION: The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe.
• WIDELY USED: It is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.

User questions & answers

Question:	Can it function in a horizontal position? I know it seems crazy, but I have a 6 inch diameter gutter that needs help keeping water flowing
Answer:	yes ,it will operate perfectly fine in vertical or horizontal position, however the problem with utilizing a pump like that would be maintaining constant uninterupted water flow into the intake openings . these pumps can not tolerate being run dry as it will destroy the pump and motor
Question:	How much Pressure will it put out
Answer:	Hello, dear friend, Thank you for your love of our products, please rest assured, the head of this pump is 40M, the pressure is 4bar, thank you for your understanding! Welcome to buy! Have a good day! Best Regards!

Product description

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

IMPORTANT: THIS PUMP DOES NOT REQUIRE A CONTROL BOX!

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. Brand new pump in the box! NOT 'Manufacturer Refurbished'.

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-2-wire + ground wire design for easy provision and energy efficiency.

-Stainless steel casing keeps this pump sturdy and functioning for years.

-The well pump submersible is easy to install and extremely versatile.

-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps.

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won't fulfill that function.

-1 year warranty.

NOTICE: Our pumps are checked for physical damage before they're shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

 

• Submersible deep well pump.
• Upgraded 2019 model with new axial load design provided additional pressure and GPM.
• Sturdy stainless steel casing to ensure prolonged lifespan.
• 2-wire, direct start model - no control box required.
• One year warranty.

User questions & answers

Question:	Is the outlet made out of cast iron, plastic or brass
Answer:	Hi, it's made from cast iron, regards - Oscar PREMIUMPUMPSUSA
Question:	What is the pumps discharge fitting size
Answer:	1 1/4
Question:	Local place said 1/2hp max.says this pump will fail in a week.I hit water 60' down the well. 110' to my 220v 30/40 pressure tank.Is he right
Answer:	Why would it fail in a week, if it is more powerful ? Thats not really how that works.... if you will put the pump at 60,70 feet and then its 110 to the tank you can get the 1, or 1.5 hp to save a little money ... the 2hp is more than what you need, but you can always adjust the pressure switch to the new psi, or put the pump further down the well..... we have a 1 year warranty, and pretty much the only thing that voids the warranty is if you get a lot of sand inside the pump... also the HP isn't the main thing to look at, its more important the max depth, psi, and gpm that you are looking for... if you want call us (786) 607-2556... also see what guarantee the local place will give you
Question:	Would this pump fit a 4 inch in diameter metal casing
Answer:	Hi, yes, it's designed for 4 inch casings, metal or PVC will work fine regarless of the material, kind regards - Oscar PREMIUMPUMPSUSA

Product description

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

This is our Stainless Steel Deep Well Pump which is ideal for the Supply of fresh water to rural homes, farms, and cabins that have 3 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. 

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-The 3-wire + ground wire design provides a control box for easy provision and energy efficiency.

-The outlet is also made from stainless steel and not iron or brass like lesser quality pumps.

-The well pump submersible is easy to install and extremely versatile.

-Heavy duty stainless steel body fit for home usage and industrial.

-This pump model can not work dry, that will cause serious and irreversible damage to the motor. Make sure that the pump is install at a depth where it will be fully submerged at all times.

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won't fulfill that function.

-2 years warranty.

NOTICE: Our pumps are checked for physical damage before they're shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

 

• Submersible Deep Well Pump.
• For 3" casings and greater diameter.
• 2 Years Warranty.
• Made from Stainless Steel
• Includes Control Box.

User questions & answers

Question:	m deep, how many liters/min please
Answer:	Do not buy... didn't work out of the box.
Question:	electrical wiring
Answer:	It's 230v... 220 wiring.
Question:	Pump curve tdh not clear what is the tdh at 10 15and 20 gpm. i’ll figure draw down and losses due to friction and minor losses
Answer:	Hi, 10ft = 17 GPM 152 PSI 52ft = 15 GPM 134 PSI 105ft = 13 GPM 111 PSI 203ft = 11GPM 69 PSI 287ft = 8 GPM 32PSI 329 ft = 4 GPM 14 PSI 362 Ft = 0 GPM 0 PSI
Question:	Cual es la garantia
Answer:	Hola, tiene dos años de garantia, regards PREMIUMPUMPSUSA

Product description

Deep Well Submersible Pump 0.5HP 150ft 25GPM Stainless Steel Deep Well Pump for Industrial and Home Use(0.5HP 110V)

The 0.5HP Deep well pump is widely used in industrial and home use .It’s max head is 150ft and rated head is 105ft,and it is made of stainless steel for greater durability.

Application:

Water submersible pump, also the QJ submersible pump is combination of motor and water pump, it works to dive into the directly.

It is a water lifting equipment, it is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.

Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.

Specifications:

Motor: 0.5HP /0.37KW.Voltage: 110V / 60HZ.Current 7.5A

Diameter: 4"

Pump Rotational Speed (Rev): 2850RPM

Applicable well diameter: 100mm / 4 inch

Power: 0.37KW / 0.5HP

Pump Max flow: 5.6M³/H 93L/Min 25GPM

Pump Rated Flow: 3M³/H 50L/Min 13.2GPM

Pump impeller: 4PCS

Pump Rated head: 32M / 105FT

Pump highest head: 45M / 150FT

Max Ambient Temp: 7℃.Max Fluid Temp: 40℃

Vertical / Horizontal Mounting: Yes

Water PH: 6.5-8.5

Packaging size: 18x 9x12 inch

Shipping weight: 25 pound

Package Content:

1 x Submersible Bore Water Water pump

1 x 1.5m(5ft) Cable

1 x User manual

• 【ESSENTIAL PARAMETER:】 Submersible Pump voltage: 110V 50HZ; The length of cable：5ft;applicable well diameter: 100mm / 4 inch; power: 0.37KW / 0.5HP; Pump flow: 25.5GPM; Pump impeller: 4PCS; Pump highest head: 164ft
• 【CONVENIENT OPERATION:】 Deep well pump with 5ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room
• 【APPLICABLE CONDITION:】 The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe
• 【EXCELLENT PERFORMANCE:】 Stainless steel body, a built in check valve（unsealed）, can be mounted vertically, Industrial grade heavy duty, also good for home usage
• 【WIDELY USED:】It is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.

User questions & answers

Question:	How many amps? I looked everywhere and can't find this info
Answer:	3.08 amps at 120 volts. Rating says .37 KW's (that's 370 watts). 370 watts divided by 120 volts equals 3.08 amps. I'm sure there's a momentary inrush of current to get it running (usually 3-5 times the rated run amperage) So for a split second it may draw as much as 16 amps (but most breakers won't trip for a split second start up also called locked rotor amperage). Nor will the wire heat up if it's only for a split second (say using a 15 amp circuit). I am an electrical engineer so I do this calculation daily in my work.
Question:	can the pump be fitted to a one and a 1/4 pipe
Answer:	With the right threaded pipe fittings, sure
Question:	What size fittings ? And can the pump be fitted to a one and a half inch pipe
Answer:	This pump didn't work for us. Wired for European electric system.
Question:	Cuanto pesa
Answer:	Peso 25 libras

Product features

Stainless Steel Body

This stainless steel submersible water pump is with a built in check valve made from stainless steel ensure that the pump is highly resistant to corrosion.

Large Flow & High Head Lift

Powerful flow with 25.5 GPM and the highest head can reach 164ft. More convenient and efficient to use water. Patented impeller provides high flow up and high head, for better performance and longer life.

Multiple Filtration Mesh

The stainless steel mesh is designed to filter impurities. If the excessive granular sediment is from a newly drilled well, it is recommended to add a layer of gauze inlet in front of the filtration system to immerse in the water to avoid long idle rotation.

High Quality Motor & Rotor

Built-in thermal protector automatically stops the pump when abnormal operation such as overload of the card machine. The fixed-rotor uses steel strip with high silicon content with high dimensional accuracy and good surface quality.

Superior Details

Large pump output for easy to connect hose or hard pipe. Sling hole used for wire rope, nylon rope. 4.9ft copper core wire with double rubber power cord for strong electrical conductivity plug can be linked to power supply.

Wide Application

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells.

Stainless Steel Submersible Well Pump

Manufactured from 304-grade stainless steel, this submersible pump is a durable workhorse that will keep you in flow for years to come. The 0.5hp deep well pump gives you a class-leading flow rate, producing an provides a consistent flow rate at up to dizzying 164ft depth under surface. Only requiring a borehole of 100mm, your Submersible Pump minimizes the work needed to reach the water.

Product description

Deep Well Submersible Pump 2HP 440ft 42GPM Stainless Steel Deep Well Pump for Industrial and Home Use(2HP 220V)

Introduction:

This is our Stainless Steel Deep Well Pump which is ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come

Feature:

Built in control box. This pump does not need a control box

Heavy-duty thermoplastic impellers, diffusers, and intake screen

Unique design reduces its noise

Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance

Stainless steel body, a built-in check valve,, can be mounted vertically, Industrial grade heavy duty, also good for home usage

Specifications:

Voltage: 220V 50HZ

Power: 1.5KW / 2HP

Applicable well diameter: 100mm / 4 inch

Single phase

Pump Rotational Speed (Rev): 2850RPM

Pump Max flow: 9.5M3/H 158L/Min 42GPM

Pump Rated Flow: 3M3/H 50L/Min 13.2GPM

Pump Max head: 134M /440FT

Pump Rated head: 82M / 269FT

Pump impeller: 12PCS

Water PH: 6.5-8.5

Brass Outlet: 1.25"

Cable: 10M / 32.8FT

Vertical Mounting: Yes

Package Content:

1 x Submersible Bore Water Pump

1 x 10m (32.8ft) Cable

1 x User manual

• 【ESSENTIAL PARAMETER:】 Submersible Pump voltage: 220V 60HZ; The length of cable：32.8ft;applicable well diameter: 100mm / 4 inch; power: 1.5KW / 2HP; Pump flow: 42GPM; Pump impeller: 12PCS; Pump highest head:440ft
• 【CONVENIENT OPERATION:】 Deep well pump with 32.8ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room
• 【APPLICABLE CONDITION:】 The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe
• 【EXCELLENT PERFORMANCE:】 Stainless steel body, a built in check valve（unsealed）, can be mounted vertically, Industrial grade heavy duty, also good for home usage. High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.
• 【WIDELY USED:】 It is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.

User questions & answers

Question:	what is pump head lift. how do you determine your head lift
Answer:	I don't understand your question
Question:	Necesito un turbina sumergible de una pulgada y media
Answer:	Es necesario que pongan toda la información juntó a las especificaciones para que no les pase a otras personas lo que Ami que compre y es 240 v 50 HZ y no lo decía al lado de la bomba .
Question:	Does this item come with control box or not
Answer:	no
Question:	can i use this pump as whole house water pump to draw water from my cistern to the entire house
Answer:	I have an 80 foot deep 4 inch well. This pump supplies water to my 3 bedroom/ 2 bath home occupied by 6 people. I live in Florida and would be glad to offer my help with the install at no charge. Not to promote the sale of this pump but as a favor to the family that's going without running water. Unfortunately I don't have traveling money. I do know what you're going through and sympathize. So if you want to get me to your well call Dewey Matthews at(850)8263715 and I will have your water running in no time.

Product features

Stainless Steel Body

This stainless steel submersible water pump is with a built-in check valve. Both the pump housing and the drive housing are made of stainless steel to ensure that the pump is highly resistant to corrosion.

Large Flow & High Head Lift

The flow rate is of Max.42GPM and the highest head can reach 440 ft. More convenient and efficient to use water. Patented impeller provides high flow up and high head, for better performance and longer life.

Multiple Filtration Mesh

The stainless steel mesh is designed to filter impurities. If the excessive granular sediment is from a newly drilled well, it is recommended to add a layer of gauze inlet in front of the filtration system to immerse in the water to avoid long idle rotation.

High-Quality Motor & Rotor

The built-in thermal protector automatically stops the pump when an abnormal operation such as an overload of the card machine. The fixed-rotor uses a steel strip with high silicon content with high dimensional accuracy and good surface quality.

Superior Details

High quality-submersible pressure-screw pump. 32.8 ft black round cable for strong electrical conductivity plug can be linked to the power supply.

Wide Application

Our deep well pump is ideal for the supply of fresh water to rural homes, farms, and cabins.

Stainless Steel Submersible Well Pump

With this powerful deep pump, you can easily and comfortably water even from greater depths. Manufactured from 304-grade stainless steel, this submersible pump is a durable workhorse that will keep you in flow for years to come. The 1.5KW deep well pump gives you a class-leading flow rate, producing a consistent flow rate at up to dizzying 440 ft depth under surface.

Product description

12V Stainless Steel Submersible Deep Well Pump

Cable Length: 10 Feet (3 Meters))

Voltage: 12V DC

Amps: 10.0 Max

Flow Rate:12LPM/3.2GPM

Maximum Lift:: 230 Feet (70 Meters)

Maximum Submersion: 100 Feet (30 Meters)

Material: 304 Stainless Steel

Inlet: 50 Mesh Stainless Steel Inlet Screen

The Outer Diameter of Outlet Port: 1/2''(12.7mm) Barbed Fitting

The Inside Diameter of Outlet Port: 3.3’’(8.5mm)

Internal Bypass: 130-150 PSI Max(9.0-10.0BARS)

Package Size: 13.97"x4.33"x5.12" (355*130*110mm)



Package Included:

1pc 12 Volt DC Deep Well Submersible Pump

• [ EASY TO HOOKUP ] - Collocate with solar panels and 12V battery systems , can be powered by some car and boat battery .
• [ WIDE USE ] - An solution for remote watering needs without electric power, like garden, farm irrigation and tank filling etc.
• [ STRENGTH ] - DC 12V, 10A Max, Flow rate: 12LPM/3.2GPM, maximum lift: 230ft (70m), maximum submersion: 100ft (30m), cable length: 10ft (3m)
• [ WARM TIPS ] - Don't use any submersible pump for petrol , gasoline , petroleum products , solvents , thinners or any other flammable liquid with a flash point below 82 degree(180F)
• [ 1 YEAR WARRANTY ] - Please feel free to get back to us in case any question or concern.

User questions & answers

Question:	Hi, how long can this pump stay underwater without working
Answer:	Sorry, we don’t have the exact data in this regard, but we suggest don't put the water pump in water or a damp place if it is not used for a long time to avoid corrosion of the pump motor. Hope it helps!
Question:	One year without using it and now, it does not work? What can I do
Answer:	Hi, in this case, please check the motor wasn't blockage by anything, if does, clean the motor at first. If everything looks fine, you can contact with our customer service team, they will trying to help you.Click the link and get the help:https://www.amazon.com/askseller?marketplaceID=ATVPDKIKX0DER&ref_=v_sp_contact_seller&sellerID=A2XHM4QW1KJCY0&_encoding=UTF8&
Question:	Specifications of SPX-24-12 pump
Answer:	Working perfectly
Question:	My solar controller outputs 14.4v. Will the pump work with such voltage or does it work only when 12v or lower
Answer:	This pump uses a 12-volt DC motor, please use a 12-volt device for power supply, higher or lower voltage will brings risks.

Product features

12V Stainless Steel Submersible Deep Well Pump

• Voltage: 12V DC
• Amps: 10.0 Max
• Flow Rate:12LPM/3.2GPM
• Maximum Lift: 230 Feet (70 Meters)
• Maximum Submersion: 100 Feet (30 Meters)
• Cable Length: 10 Feet (3 Meters)
• Material: 304 Stainless Steel
• Inlet: 50 Mesh Stainless Steel Inlet Screen
• The Outer Diameter of Outlet Port: 1/2'' (12.7mm) Barbed Fitting
• The Inside Diameter of Outlet Port: 3.3’’ (8.5mm)

Ideal Choice For The Supply Of Fresh Water To Rural Homes, Farms And Cabins That Have 4 inch And Greater Diameter Drilled Wells

• 【DURABLE MATERIAL】- Made of 304 stainless steel and a built in check valve, the submersible well pump is rust- and salt water resistant, and thus highly durable and waterproof for long time to use.
• 【ESSENTIAL PARAMETER】- Submersible Pump Voltage: 110V 60HZ; Pump highest head: 164ft; Pump flow: 22.9GPM; The length of cable: 49.2ft; Applicable Well Diameter: >100mm / 4 inch; Power: 370W / 0.5HP; Pump impeller: 5 PCS. NOT require an external control box!
• 【HIGHER PUMP HEAD & FLOW】- Powerful flow of water well pump can achieve 22.9GPM and the highest head can reach 164ft. More convenient and efficient to use water. Heavy-duty thermoplastic impellers design provides high flow up and high head, for better performance and longer life.
• 【EXCELLENT PERFORMANCE】- Stainless steel body, a built in check valve(unsealed), can be mounted vertically, Industrial grade heavy duty, also good for home usage. High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.
• 【WIDELY USED】- This deep well pump is suitable for extraction from the deep wells for groundwater, and also uses in rivers, reservoirs, canals and other water lifting works. Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.

User questions & answers

Question:	Is a 110V or 220v
Answer:	Although i haven't installed it, It is 110V with a standard 3 prong 110 v wall plug
Question:	Does this pump have its suction on the bottom and you lay it on it side in a water tank
Answer:	Yes, its suction on the bottom and you need to stand it in the water, thank you.
Question:	Can I use it in 18’ garden well, also is it fit in the 4” pvc pipe
Answer:	Yes
Question:	What RPM does the motor spin at
Answer:	Alot

Product features

Stainless Steel Body

This stainless steel submersible water pump is with a built in check valve made from stainless steel ensure that the pump is highly resistant to corrosion.

Large Flow & High Head Lift

Powerful flow with 25.5 GPM and the highest head can reach 138ft. More convenient and efficient to use water. Patented impeller provides high flow up and high head, for better performance and longer life.

Multiple Filtration Mesh

The stainless steel mesh is designed to filter impurities. If the excessive granular sediment is from a newly drilled well, it is recommended to add a layer of gauze inlet in front of the filtration system to immerse in the water to avoid long idle rotation.

High Quality Motor & Rotor

Built-in thermal protector automatically stops the pump when abnormal operation such as overload of the card machine. The fixed-rotor uses steel strip with high silicon content with high dimensional accuracy and good surface quality.

Superior Details

Large pump output for easy to connect hose or hard pipe. Sling hole used for wire rope, nylon rope. 49.2ft copper core wire with double rubber power cord for strong electrical conductivity plug can be linked to power supply.

Wide Application

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells.

Stainless Steel Submersible Well Pump

Manufactured from 304-grade stainless steel, this submersible pump is a durable workhorse that will keep you in flow for years to come. The 0.5hp deep well pump gives you a class-leading flow rate, producing an provides a consistent flow rate at up to dizzying 138ft depth under surface. Only requiring a borehole of 100mm, your Submersible Pump minimizes the work needed to reach the water.

• [ Wide Application ] - Easily hook up to solar panel or battery, be widely applied on watering, camping, irrigation, fountain, Aquriam etc.
• [ Large Flow ] -Powerful speed flow, max flow rate: 6LPM/1.6GPM , Max lift height: up to 230 feet(70 meters), Max submersion: 100 feet (30 meters). For 4'' wells or larger, dual filter, run dry without damage, state of the art solid diaphragm, stainless steel fastener, food grade material.
• [ Long Life of Service ] - 50 meshes stainless steel inlet screen. Corrosion-proof housing with stainless steel fasteners , for 4-1/8" wells or larger.
• [ High Efficiency ] - Large delivery volume, high delivery pressure, aimed the maxi-mum of this class , continuous running under water, special motor cooling technology.
• [ Easy to Carry ] -Compact size, light weight, easy carrying. Suggest use flexible hose for easy operation.

User questions & answers

Question:	Why would this pump turn on/off while power is connected
Answer:	Check for loose power connection
Question:	is this a brushless moter
Answer:	Hi, this is not a brushless moter, hope it is help for you.
Question:	Can I use a 4 amp battery charger to run my 12V eco-worthy submersible pump
Answer:	is it a new smart charger? if so then not without a battery. now that i think about it i believe it takes 10 amps on 12 volts to run this pump. so your 4 amp charger will not run this pump without a battery

Product features

12V DC Submersible Deep Well Pump

• Motor: Permanent Magnet Thermally Protected
• Internal Bypass: 105-110 PSI Max. (7.2-7.5 BARS)
• Outlet Port: 1/2" (12.7mm) Barbed Fitting
• Inlet: 50 Mesh Stainless Steel Screen
• Dimensions: 13.97"x4.33"x5.12" (355*130*110mm)

Easy Installation

• Designed to be used with solar panels and 12V battery systems
• Easy hookup to most any existing solar panels or wind generator systems.
• Can be powered by 12V solar panel or battery directly
• Can be used with or without components such as voltage controllers.
• Can be used for livestock watering, irrigation, ponds, remote homes and cabins.

Features

• For 4" wells or larger
• Quick disconnect with "Watertight-Gland" Design Pat Pend
• Corrosion-proof housing with stainless-steel fastener
• Pump Design: Positive Displacement 3 Chamber Diaphragm Pump
• Material: High Strength Engineered Plastic
• Stainless Steel fastener
• State of the art solid diaphragm

Benefits

• Unique water blocked cable connector is impervious to water leakage and condensation problems preventing water-wicking.
• Use with solar panels and 12v battery systems.
• Water blocked cable connector is impervious to water leakage, condensation.
• Accepts a variety of jacketed cables from your power source Runs dry without damage.
• Great for livestock watering Deep well, remote home and cabin

Use with Solar Panels and 12V Battery Systems & Perfect Choice for Remote Watering Needs without Electric Power!