14 best shallow well jet pumps

Product description

Keep your rural home, farm, or cabin supplied with fresh water all year long for years to come with the help of this Red Lion RJS-100 1-HP Premium Shallow Well Jet Pump. This heavy-duty pump is designed with a 115/230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability.



It also features 50 PSI and a 23 GPM flow rate with automatic shut-off, voltage selector for simple connection to existing power sources, a factory pre-set 30/50 pressure switch, and a glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow. Ideal for shallow wells up to 25 feet in depth, the Red Lion RJS-100 1-HP Premium Shallow Well Jet Pump will get the job done.

• 1 HP SHALLOW WELL JET PUMP: Premium 1-HP jet pump is used for supplying fresh water to large homes, farms, and cabins
• HEAVY-DUTY CAST IRON CONSTRUCTION: This heavy-duty pump is designed with a 115/230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability
• GLASS-FILLED THERMOPLASTIC IMPELLER AND DIFFUSER: It has a glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow
• SHALLOW JET PUMP: Ideal for shallow wells up to 25 feet in depth, the Red Lion RJS-100 1-HP Premium Shallow Well Jet Pump will get the job done
• 115/230 VOLT HEAVY-DUTY CENTURY MOTOR PUMP: It also features 50 PSI and a 23 GPM flow rate with automatic shut-off, voltage selector for simple connection to existing power sources, a factory pre-set 30/50 pressure switch

User questions & answers

Question:	Installed 1hp pump outside, the ambient temperature is 90°. after running for 30 min the motor housing is just over too hot to touch. is this normal
Answer:	I would say it is normal. These pumps are not built for long running applications and after a few minutes they get hot. If long running is needed on a regular basis you may need a different pump. My use on 5 minutes on to refill the storage tank, then off for an extended time so it never gets very hot.
Question:	Hasta que profundidad hala
Answer:	Me parece que el maximo de profundidad son 75 pies.
Question:	Does this pump come with a three prong plug
Answer:	Negative. the pump has no wiring attached. YOU provide the wiring to the pressure switch - either hard wire or 3 Prong. YOU determine if it is 120 or 240V (by changing the position of the shunt in the back of the motor housing). VERY good and dependable unit.
Question:	What size are the suction and discharge holes
Answer:	1.25 in suction. 1 in discharge.

Product features

Red Lion RJS Premium Cast Iron Shallow Well Jet Pump

Our Red Lion RJS-Prem series is the best performing pump in the retail market, ideal for the supply of fresh water to rural homes, farms, and cabins. Its rugged cast-iron construction is designed for years of service and reliability.

The Red Lion Story

Backed by the heritage of a global leader in the development and manufacturing of systems and components that move water, the Red Lion brand remains at the forefront of product innovation by listening to its customers, adapting to the market, and continuing to invest in research and development. This innovative product portfolio is supported by unparalleled service to provide you with current solutions to your water pumping challenges.

Product description

Acquaer SJC100-1 is a 1 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.

• 1 HP, maximum flow rate is 1200 gallons per hour
• 1-1/4 in. Suction and 1 in. Discharge
• Dual voltage (115V/230V) high efficiency square flange motor (factory set for 230V)
• Durable cast iron volute with priming port for volute filling
• Two-years limited warranty

User questions & answers

Question:	What is maximum intake pipe size
Answer:	the inlet is 1 1/4in and I would not go any higher than 1 1/2in`s. I use my pump for a booster pump to pull water out of a 500 gal tank into a pressure tank. hope this help`s?
Question:	How can I get parts for this pump
Answer:	Dont own it anymore sorry....
Question:	Running it on 230 Volts what is the load amps ? Need this for fuse
Answer:	I have mine hooked up to my well with a 500gal storage tank with this pump supplying my pressure tank on a 50amp breaker. hope this helps?
Question:	What is the gpm on this 1 hp pump? Thanks
Answer:	I am not sure l believe about 800 per hour. Rudy Perez

Product description

Acquaer CJE100 is a 1 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery

• 1 HP, maximum head is 164ft.
• 1-1/4 in. suction and 1 in. discharge with ejector included
• Dual voltage motor (115/230V), factory wired for 230V
• Durable cast iron volute
• Two-year limited warranty

User questions & answers

Question:	I understand this pump is convertible, does it comes set as shallow well or as a deep well configuration
Answer:	This style of pump normally comes with an injector that when used as shallow well gets bolted on the end of the pump and for deep the injector goes down in the well. There are some additional fittings included for each with instructions on the needed changes.
Question:	really only 11.5 gph? i can movee water that fast with a cup
Answer:	It's 11.5 gpm, not 11.5 gph.
Question:	Does this unit require a tank
Answer:	all pumps should be connected to pressure tank unless you have an unlimited supply of water and or plan on continuous running
Question:	I bought the acquaer 1hp deep well pump and it will pump to 50 on 30/50 switch on 40 gal tank with 50psi on tank it will not keep pressure on hose
Answer:	I have the same pump and adjusted the pressure switch to 40/60 with a 40 gallon pressure tank and haven't had any pressure issues.

Product description

Product Details



With a corrosion resistant stainless steel construction, the Lanchez 1/2 HP 960 GPH shallow well jet pump offers performance to 26 feet depth of water at 55.1PSI. Featuring emergy-efficient motor with thermal overload protection, it also makes only a little noise when operating. Includes 420 shaft, heavy duty ball bearings, balanced motor, mechanical shaft seal and insulated motor windings and 6 feet cable. The sprinkler pump is designed for 115V, 60HZ.



Tip:Please add some water to the outlet before operation.



Application Occasions



The Lanchez shallow well jet pump is designed for continuous duty use in watering applications, such as gardens, lawns, irrigation systems, booster services, and other household applications.



Specification



Nominal voltage: 115V/60HZ

Output power: 1/2HP

Motor full load: 6 amps

Max.height: 125 feet

Max.suction height: 26 feet

Max.Flow: 960 GPH

Max.fiuid temperature: 95°F

Max.grain size: 0.04 inch

Max.pressure: 55.1 PSI

Die. of pipe: NPT 1inch

Length of cable: 6 feet

Package includes:



1 x shallow well jet pump

2 x detailed instruction manual

• 1/2 HP; Flow rate to 960 gallons per hour;
• Corrosion-resistant stainless steel construction extends product life and is easy to clean.
• Lower noise and emergy-efficient motor with thermal overload protection.
• Designed for continuous duty use in watering application. Suitable use in garden, lawn, farm and rural house.
• UL certificated. TIP: Please add some water to the outlet before operation.

User questions & answers

Question:	Would deadheading the pump or motor damage
Answer:	If the question is: would deadheading the pump momentarily damage the pump? My best guess is it would not. I would not deadhead it for long. What application would you have that would require deadheading it?
Question:	I have an endless swimming pool, on a slab. Will this pump work here
Answer:	I am sure it would
Question:	Does any hose come with pump
Answer:	No hoses, no fittings, no pipes
Question:	Is this a brushless motor
Answer:	Dear Customer, No, it is not a brushless motor. It's AC motor.

Product features

WARNING

Do not run the pump before priming it, since the seal and impeller could be permanetly damaged.

Remove the plug from the street tee and pour clean water into the unit until casing and suction line are completely filled.

APPLICATION

Perfect use in garden, lawn, farm and rural house.

The pump is suitable for installations where the vertical distance from the pump to water level does not exceed 25 ft.

DETAILS

• Easy-to-carry handle for portability
• Stainless Steel head
• Aluminium Housing

GREAT PERFORMANCE

More powerful than those 1 HP pumps on the market

Product description

This 1/2 HP jet pump is ideal for the supply of water to rural homes, farms or cabins with suction lifts up to 25 feet. It features a rugged cast iron casing with 1-1/4 inch suction and 1-inch discharge. It produces up to 50 psi with automatic shut off. TEFC design with simple connection to existing power source. 8.4 amps at 115 volts and 4.2 amps at 230 volts. Comes with a 2 year warranty. If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST.

From the Manufacturer

This jet pump is ideal for the supply of water to rural homes, farms or cabins with suction lifts up to 25 feet. It features a rugged cast iron casing with 1-Inch suction and 1-Inch discharge.

• 1-Inch x 1-Inch suction and discharge
• 30/50 pressure switch
• Self-priming
• Pressure to 52 psi
• Flow rate to 11.8 gpm and dual voltage - 115/230v

User questions & answers

Question:	Would I be able to install a 40-60 pressure switch on this pump
Answer:	It comes with an adjustable pressure switch mounted on its side.
Question:	Where was this item manufactured at
Answer:	Not sure but ours was defective out of the box... Worked for one day and the turn around time to get it replaced was not manageable(not Amazon's fault). We had to get a different brand.
Question:	Final installation of this pump will be on 220v. I will need 110v temporarily on extension cord, how many amps does this pump pull on
Answer:	Run mine on 110, while I haven't measured current flow, it seems to pull close to 15 amps on start up and probably runs on 10 or 12. Hope this helps.
Question:	Pump is connected to a 20 amp breaker on a dedicated 12 gauge line. The breaker keepa tripping. Do i need to get a replacement
Answer:	The spec says it runs 13.2A at 110V. That may be a nominal number. (Assuming you're using 110V since a 20A breaker). At start up it may be borderline near the 20A mark or just above it. All motors have that surge at start up. Mine is running on a 50A circuit 220V from the older larger pump requirements previously installed. No prob with that of course.

Product features

Red Lion

Backed by the heritage of a global leader in the development and manufacturing of systems and components that move water, the Red Lion brand remains at the forefront of product innovation by listening to its customers, adapting to the market, and continuing to invest in research and development. This innovative product portfolio is supported by unparalleled service to provide you with current solutions to your water pumping challenges.

Product description

Clean water is important to you, and it’s important to WAYNE. The 1 HP SWS100 is proudly assembled in the USA and can safely pump up to 630 Gallons of fresh water per hour at 50 PSI. Engineered for reliable long-lasting use in wells up to 25 feet – warrantied for 3 years.

• For wells 0 ft. - 25 ft. in depth
• Corrosion resistant cast iron motor housing
• 1 in. NPT discharge, 1-1/4 in. NPT intake
• Reliable thermoplastic impeller for maximum water flow
• Dual voltage 120-Volt / 240-Volt and a 30/50 pressure switch included
• Pump is assembled in the USA to deliver dependable performance that lasts for years
• Quality and reliability warrantied

User questions & answers

Question:	How many amps does the 1/2 HP pump draw
Answer:	The label says 11 amps starts, 5.5 amps running. So I thought I could run it with a Honda EU 2000 generator. It wouldn't handle the start-up load. Switched to a EU 3000. That works, but it's still a big pull on startup. The overload light will blink momentarily, the runs fine. Well depth around 20'.
Question:	if have to return is return shipping free
Answer:	Mine was purchase from Home Depot> Live 10 minute from a home depot if there was a problem they will replace it. No problems .
Question:	well is 25 feet deep, need to deliver water to building approx. 100 feet away, will it deliver water there without a pressure tank
Answer:	You well depth doesn't determine anything. Your depth to the the water table determines how fast you can pump the water (gallons per min). You can have 100' deep well and a 10' deep well side my side and they will perform roughly the same if the water table is 8' It's the distance from the water table to the pump that matters. You can only suck water up about 25'. After 25' the weight of the water starts to exceed the vacuum of the pump and it's ability to "suck" water up. Once you get the water in the pump you can push it honorarily as far as you want. This pump an create 50-60PSI of pressure. You could push water vertically maybe 100' or so with that 50PSI. The pressure will drop fast as you push water vertically. In short moving water up hill is the hard problem. Moving downhill or sideways is easy. As for the pressure tank buy a small 1 gall tank and install it next to the pump. The $40 more will make you and your pump a lot happier. If you don't your pump will cycle on/off.
Question:	Can you hook a regular gardan hose to it
Answer:	Yes. You need an adapter with a Male hose thread (MHT) on one end and a Male 3/4" standard pipe thread (NPT) on the other end. You could also buy an outdoor water spigot and a 1/2" female NTP to 3/4 male NTP adapter and screw the spigot directly into one of the 3/4" ports on the pump. Note: You need at a minimum a (1 gal or larger) pressure tank to make the pump/pressure switch turn on/off correctly/reliably. The pump will cycle on/off/on/off... without the pressure tank.

Product description

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing.

• Pumps are manufacturer tested and may contain water inside from such testing,
• See all sketch images for more details, NEMA standard, 60 Hz, 1/2 HP, 115/230 V capacitor start, single phase, 3500 RPM
• Built-in overload with automatic reset, stainless steel shaft, pressure regulator included.
• Rotation: Clockwise when viewed from motor end, UL778 listed
• Pipe connections: 1. 25" Npt suction and 1" Npt discharge, pressure switch: as4 preset (30-50 PSI).

User questions & answers

Question:	what is the amps on this pump
Answer:	8.6-10.3 max @115V. 4.3-6.4 max @ 230V (Pump can be switched from 115 to 230V)
Question:	Is this made from cast iron and make my water rusty like cast iron pumps usually do
Answer:	Yes, it is made out of cast iron. It's painted and we see no reason why this would make water rusty.
Question:	What's the power wattage in this pump
Answer:	The pump is switchable 120v or 240v 8.6amps 4.3amps It depends on your application.
Question:	Is this pump quiet? We have the same one now and it squeals very loud
Answer:	I have a new J5 convertible deep well pump and it really sings when it runs.

Product features

Goulds J5S Shallow Well Jet Pump

Features and Benefits

• Shallow Well Adapter Built In
• Back Pull-Out Design
• Two Compartment Motor for Easy Access to Wiring
• Corrosion Resistant
• Protected Mechanical Seal

Product description

Superior Pump builds pumps that are truly Built to Last with quality components and are 100 percent factory tested. The 94505 1/2 HP shallow well jet pump features a rugged cast iron pump body for durability. Designed for shallow well applications this pump will work with wells up to 25 feet in depth. This pump features a pre-mounted, fully adjustable pressure switch preset at 20/40 psi. A dual voltage motor, with built-in thermal overload protection, can be set for 115-Volt or 230-Volt. Tough thermoplastic impeller and glass filled thermoplastic diffuser are designed to move up to 10 gallons per minute at 40psi. The pump is built using a cast iron seal plate and offers 1-1/4-inch NPT suction/1-inch NPT discharge.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• Will pump up to 10 gallons per minute at 40psi
• Rugged cast iron pump body and seal plate with premounted fully adjustable pressure switch, dual voltage motor (115/230v) with thermal overload protection
• 1-1/4-inch NPT suction, 1-inch NPT discharge / drive ports, tough thermoplastic impeller and glass filled thermoplastic diffuser
• For shallow well applications up to 25 feet depth
• Superior Pumps are Built to Last, engineered with quality components and are 100 percent factory tested

User questions & answers

Question:	Is this pump designed to be self priming
Answer:	Pump needs to be primed
Question:	Does this have 1" suction and 1" discharge? What is the GPH
Answer:	This has a 1.25" suction and 1" discharge and specs say up to 13.75 GPM. I google the model to find the specs on the manufacturer's site. http://www.superiorpump.com/products/jet/94705.html
Question:	will this pump work if well is 47 foot deep
Answer:	Hi there, NO. This is a shallow well pump for wells at or less than 25' depth. You need a deep well or convertible pump. Thanks
Question:	Looking for a pump to set at 40psi on/60psi off, will the 3/4 hp pump work for this at 115 volts
Answer:	Hi there, We do not have one of these type of pumps that can be set at 40/60. They can be set up to 30/50 and maybe a bit higher. Thanks

Product description

The WAYNE SWS100 1-horsepower shallow well jet pump is for wells up to 25-feet deep. At 50 psi it pumps up to 510 gph. The sws's efficient square flange motor is thermally protected to prevent overheating.

From the Manufacturer

The Wayne SWS100 1-Horsepower shallow well jet pump is for wells up to 25-Feet deep. At 50 PSI it pumps up to 558-Gallon per hour at 5-Feet depth.

• 1 hp; max. Flow rate is 510 gallons per hour; (50 psi). For wells 0 ft. - 25 ft. in depth
• 3/4 in. Npt discharge with 1-1/4 in. Suction
• Pressure switch is pre-set at 30-50 psi for automatic operation
• Durable cast iron volute with dedicated priming port for volute filling.
• Assembled in the US with foreign and domestic parts

User questions & answers

Question:	How many amps does the 1/2 HP pump draw
Answer:	The label says 11 amps starts, 5.5 amps running. So I thought I could run it with a Honda EU 2000 generator. It wouldn't handle the start-up load. Switched to a EU 3000. That works, but it's still a big pull on startup. The overload light will blink momentarily, the runs fine. Well depth around 20'.
Question:	if have to return is return shipping free
Answer:	Mine was purchase from Home Depot> Live 10 minute from a home depot if there was a problem they will replace it. No problems .
Question:	well is 25 feet deep, need to deliver water to building approx. 100 feet away, will it deliver water there without a pressure tank
Answer:	You well depth doesn't determine anything. Your depth to the the water table determines how fast you can pump the water (gallons per min). You can have 100' deep well and a 10' deep well side my side and they will perform roughly the same if the water table is 8' It's the distance from the water table to the pump that matters. You can only suck water up about 25'. After 25' the weight of the water starts to exceed the vacuum of the pump and it's ability to "suck" water up. Once you get the water in the pump you can push it honorarily as far as you want. This pump an create 50-60PSI of pressure. You could push water vertically maybe 100' or so with that 50PSI. The pressure will drop fast as you push water vertically. In short moving water up hill is the hard problem. Moving downhill or sideways is easy. As for the pressure tank buy a small 1 gall tank and install it next to the pump. The $40 more will make you and your pump a lot happier. If you don't your pump will cycle on/off.
Question:	Can you hook a regular gardan hose to it
Answer:	Yes. You need an adapter with a Male hose thread (MHT) on one end and a Male 3/4" standard pipe thread (NPT) on the other end. You could also buy an outdoor water spigot and a 1/2" female NTP to 3/4 male NTP adapter and screw the spigot directly into one of the 3/4" ports on the pump. Note: You need at a minimum a (1 gal or larger) pressure tank to make the pump/pressure switch turn on/off correctly/reliably. The pump will cycle on/off/on/off... without the pressure tank.

Product description

This shallow well jet pump is ideal for the supply of fresh water to rural homes, farms and cabins that have suction lifts down to 25 feet. Features include corrosion-resistant stainless steel pump housing, a 115/230-volt heavy-duty motor and a factory pre-set 30/50 pressure switch that can produce up to 50Psi with an automatic shut-off. If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST.

• Shallow well jet pump - ideal for use in pumping at depths of 25' or less
• Corrosion-resistant stainless steel pump housing - for years of service and reliability
• Includes factory pre-set 30/50 pressure switch - produces up to 50 psi with automatic shut-off
• 115/230 volt heavy-duty motor - TEFC design with simple connection to existing power source

User questions & answers

Question:	I was wondering what the maximum water temprature of this pump is and if the pump is nsf certified. thanks
Answer:	This pump max temp is close to 90* F. No this pump is not NSF certified.
Question:	Gph capacity
Answer:	It depends on the lift height, length of pipe, diameter of pipe, etc. there is a curve on their website.

Product features

Red Lion

Backed by the heritage of a global leader in the development and manufacturing of systems and components that move water, the Red Lion brand remains at the forefront of product innovation by listening to its customers, adapting to the market, and continuing to invest in research and development. This innovative product portfolio is supported by unparalleled service to provide you with current solutions to your water pumping challenges.

Product description

The BURCAM 506221P noryl shallow well jet pump is designed for use in conjunction with a captive air pressure tank to deliver potable water with a maximum vertical lift of 25 feet to the home, cottage or farm. The 3/4 HP, dual voltage 115/230V, totally enclosed fan-cooled motor, bearing to bearing, is equipped with automatic thermal and overload protection and a full-time run capacitor. The large noryl body is easy to prime and delivers clean, rust-free water. The pump has a built-in ejector and can deliver a maximum pressure of 60 PSI, but comes assembled with a 30/50 PSI pressure switch. The pump also includes a 0-100 PSI pressure gauge. The capacity is up to 850 GPH.

• CORROSION-RESISTANT PUMP BODY: Drink cleaner water with corrosion resistant noryl pump body.
• QUIET OPERATION: Noryl helps reduce sound noise to help provide a quieter and smoother operation.
• INDUSTRIAL TYPE MOTOR: 115/230 Volts Fan cooled industrial motor factory preset 30/50 pressure switch with pressure gauge included.
• EASY TO PRIME: Large noryl body to help priming.
• PUMPING APPLICATIONS: This pump is recommended for a shallow well application with a maximum vertical suction lift of 25 feet or less. .
• PUMP FEATURES: 1 1/4 in suction and 1 in discharge reinforced stainless steel threads connections.
• PUMPING CAPACITY: High flow water pumping capacity up to 850 GPH.

User questions & answers

Question:	what are the inlet and outlet diameters
Answer:	1 1/4 inch threaded suction 1 inch discharge
Question:	do i need a pressure tank with this pump
Answer:	Yes, a pressure tank is needed for the proper functioning of the pressure switch on this pump (to start and stop the pump). If you have any other questions, please do not hesitate to contact our customer service department at 1-800-361-1820 (Monday to Friday, 8AM to 5PM, Eastern time zone).
Question:	Can this one be set for 110v
Answer:	From fabric the standar setting is 115 V. But you can change the setting to 230 V. In115 V run 8.4 A and in 230 V run 4.2 A.
Question:	Amps needed to run it
Answer:	I believe this one can run on 120 or 240. I think there's a switch on it. Either way mine is hooked up to a normal electrical panel.

Product description

The BURCAM 506227P noryl shallow well jet pump system is designed to deliver potable water with a maximum vertical lift of 25 feet to the home, cottage or farm. The 3/4 HP, dual voltage 115/230V, totally enclosed fan-cooled motor, bearing to bearing, is equipped with automatic thermal and overload protection and a full-time run capacitor. The large noryl body is easy to prime and delivers clean, rust-free water. The pump has a built-in ejector and can deliver a maximum pressure of 60 PSI, but comes assembled with a 30/50 PSI pressure switch. The pump also includes a 0-100 PSI pressure gauge. The capacity is up to 850 GPH. The pressure tank bladder design offers no water to metal contact to eliminate condensation and corrosion.

• CORROSION-RESISTANT PUMP BODY: Drink cleaner water with corrosion resistant noryl pump body.
• HIGH PERFORMANCE JET PUMP: Maximum vertical pumping capacity of 25 feet. Pumping capacity up to 850 gallons per hour.
• QUIET OPERATION: Noryl helps reduce sound noise to help provide a quieter and smoother operation.
• INDUSTRIAL TYPE MOTOR: 115/230 Volts Fan cooled industrial motor factory preset 30/50 pressure switch with pressure gauge included.
• PUMPING APPLICATIONS: This pump is recommended for a shallow well application with a maximum vertical suction lift of 25 feet or less.
• PRESSURE TANK: The pressure tank bladder is designed to eliminate water to metal contact and condensation that can cause corrosion.
• EASY TO PRIME: Large noryl body to help priming.

User questions & answers

Question:	Product info shows 230 volts , however other sites shows this model 115/230 please clarify
Answer:	It came set at 115 but is both 115/230
Question:	Can i pump water from a lake with this pump
Answer:	you sure can have set a few of them up for that work great a good pump system Keith
Question:	Does this product plug into an outlet or does it come with positive and negative wires
Answer:	It has a pressure switch with attachments for standard 110 or 220 ac wiring, there is no wall plug,
Question:	How many watts is this to run? I’m looking for a pump to use off-grid
Answer:	The conversion of electrical HP to watts is about 746 watts/HP, so at full load, a 3/4 HP pump would pull about 560 watts. But induction motors typically run about a .8 power factor (80% "efficient"), thusthis pump will require about 700 KVA (560/.8). For a 120 volt system, that's about 5.8 amps.

Product description

1 HP Shallow Well Water Jet Pump Stainless Steel 1 Inch 110V

With this shallow well pump you can easily irrigate the garden and lawn. It comes with a automatic booster system and has 1 horsepower for home and agricultural irrigation. It can extract 2.8 cubic meters of water per hour with a maximum lift of 148ft. You can free your hands to do more things you want to do, let this shallow well pump help you solve the irrigation troubles.

The pack of the jet pump includes product manual. Please read the Product Manual carefully before installing and operating the pump

Features:

1 HP water jet pump shallow well fountain garden lawn sprinkler system

Pumping water from a shallow or medium slope to a high place

1" NPT for suction and 1" NPT discharge

This shallow well pump voltage is 110v and the power is 750 watts

Steel tank hose, Cast iron pump body, Steel pressure tank with gauge

It can extract 2.8 legumes of water per hour and easily irrigate the garden fruit forest

Specification:

Type: JS-100

Voltage: 110V

Power: 750W

level of protection: IP44

The ports: 1 inch

House power: 1 HP

Q max: 740GPH ( 2.8 cubic meter )

H max: 148ft ( 45 meter )

Speed (max): 3420 RPM

Gross Weight:29.1 lb ( 13.2 kg )

Package Dimensions (L x W x H): 18.8 X 12.2 X 21.6 inch ( 48 X 31 X 55 cm )

Package Content:

1 X Shallow Well Jet Pump

1 x Product Manual

• 【HIGHER PUMP HEAD & FLOW】- 740GPH, fully meet the daily water needs, 148ft head max, automatic operation, easy to operate, safe to use.
• 【POWERFUL MOTOR】- 750W motor, 1 HP Shallow Well Jet Pump with high horsepower to pumping water, high efficiency, ensure that in a short time to extract enough water for daily life and agricultural irrigation.
• 【STAINLESS STEEL SHALLOW WELL PUMP】- The shallow well jet pump consists of a stainless steel pump head, a steel tank hose and a steel pressure tank with pressure gauge. Made of stainless steel, it is corrosion resistant and rust free.
• 【EXCELLENT PERFORMANCE】- 3420 RPM high speed, durable body and power body makes this machine better than others at the market. Thermal overload protection to prevent combustion and prolong the service life of the pump.
• 【WIDE APPLICATION】- Premium 1-HP jet pump is used for supplying fresh water to large homes, farms, and cabins. It can be used for both commercial and domestic use. Also can be pumped water from a shallow or medium slope to a high place and is suitable for constructing a lawn sprinkler system.

User questions & answers

Question:	Pressure is not holding. How can we trouble shoot
Answer:	leak in the system
Question:	Adjustable pressure
Answer:	Yes it has an adjustment nut to adjust
Question:	I am off grid and run a 2000 walt inverter, How many starting watts will this pump pull
Answer:	I was frying cheap pumps and researched my need vs problem. I chose this pump because it runs at a lower power consumption rate, around 750 watts. Your momentary surge, at startup will still work off your generator...
Question:	Can anyone please indicate the inlet port (pipe coming from the tank to be connected) and the outlet port (pipe going to the house to be connected
Answer:	1" npt. Stands for national pipe thread. Both in and out are FNPT. Meaning f for female fitting and npt. Use more Teflon than normal as these fittings tend to leak. Some pumps come with adapter 1" to 3/4" like regular garden hose size is, 3/4".

Product features

Superior Material

High-strength stainless steel material is selected to effectively improve various performances, especially suitable for transport water, high strength, toughness and wear resistance.

High Quality Motor

The motor adopts permanent magnet separation capacitor motor with full copper coil to provide powerful power supply and safety protection so as to prolong the service life of the pump.

Automatic Booster System

The automatic booster system and high-precision pressure gauge allow you to clearly see the pressure value and easily control the water pressure.

Centrifugal Impeller

Stainless steel impeller with low noise is corrosion-resistant and rust-free, eliminating the generation of rust water and ensuring the safety of drinking water.

Heat Dissipation Design

Designed with large ventilation path, strong heat dissipation and long service life.

Wide Application

The shallow well jet pump is designed to supply fresh well water to residential homes, farms, cabins as well as agricultural structures and many others.

1 HP Shallow Well Water Jet Pump

With this shallow well pump you can easily irrigate the garden and lawn. It comes with a automatic booster system and has 1 horsepower for home and agricultural irrigation. It can extract 2.8 cubic meters of water per hour with a maximum lift of 45 meters. You can free your hands to do more things you want to do, let this shallow well pump help you solve the irrigation troubles.

Product description

Our pressurized water booster pump is perfect for transferring water from wells or water reservoirs up moderate slopes and to upper stories of buildings. This water pressure booster pump gives homes up to 5 times more pressure in their water pipes for better showers, cleaning and irrigation. 1.6 horsepower motor pumps 1000 gallons per hour and has a max lift of 150 feet. This pump is perfect for draining, adding water pressure to houses and farm irrigation.

Features:

• The shallow well jet pump is designed to supply fresh well water to residential homes, farms, cabins as well as agricultural structures and many others
• Jet water pump can be pumped water from a shallow or medium slope to a high place and is suitable for constructing a lawn sprinkler system
• Built-in thermal overload protection, so that the pump automatically stops when the card machine is overloaded to prevent burning
• Automatic booster system and high-precision pressure gauge allow you to clearly see the pressure value and easily control the water pressure
• Shallow well jet pump is suitable for high floor domestic water, faucet and shower pressurization, groundwater and well water extraction, farmland irrigation and water supply, and water tower pressurization
• Equipped with an automatic booster system and pressure gauge for easier and safer operation
• Designed and manufactured in line with the valid CE safety requirements

Specifications:

• Watt: 1200
• Horsepower: 1.6
• Max Flow Rate: 16.71GPM / 1000GPH
• Max Lift: 150 Feet
• Max Pressure: 72.5 PSI
• Hose Fitting: 1"
• Container Size: 5 Gallon
• Overall Dimension: 12"(W) x 18"(L) x 19"(H)

Package Contents:

• Water Pressurized Garden Pump
• Manual

*Note Pump not for drinking water, internal drinking water filter is required*

• The shallow well jet pump is designed to supply fresh well water to residential homes, farms, cabins as well as agricultural structures and many others
• Jet water pump can be pumped water from a shallow or medium slope to a high place and is suitable for constructing a lawn sprinkler system
• Built-in thermal overload protection, so that the pump automatically stops when the card machine is overloaded to prevent burning
• The automatic booster system and high-precision pressure gauge allow you to clearly see the pressure value and easily control the water pressure
• Shallow well jet pump is suitable for high floor domestic water, faucet and shower pressurization, groundwater and well water extraction, farmland irrigation and water supply, and water tower pressurization

User questions & answers

Question:	Will it be okay to reduce the output to 3/4 to fit a garden hose
Answer:	Yes You. Can I draw. Water from. The lake to water my. Lawn. With garden hose
Question:	Can you adjust the pressure on this pump
Answer:	Not sure, never tried. I almost think no.
Question:	can this pump be run off a small generator
Answer:	Yes. Make sure he set has enuff wattage.
Question:	will this pump work in my house i have a 2 inch sand point for my house
Answer:	Yes it should I am pumping water about150 feet with no problem