11 best industrial pumps

• Empty Petroleum Products, Light Oils, Kerosene, Diesel, Gasoline, Water (Including Drinking Water)…etc.
• Polyethylene construction / Bisphenol A Free / Works with Drinking Water
• 34" Suction Tube / Cut at a angle to Lay Flat on bottom of Barrels
• Includes adapter to fit 2" Drum Openings works with 15, 30, & 55 gal drums
• Total Length: 45.7 inch / Suction Tube Length: 33.6 inch / Discharge Tube Length: 46.4 inch

Product features

Manual Action Drum Barrel Pump wtih Ergonomic Grip

Product description

The 2088 pumps are suited for beverage and water applications such as city water pressure boost, portable cart water delivery, batch and transfer of product. These pumps activate automatically as line pressure drops and turns off when a preset pressure is achieved. It is self-priming and can run dry without damage. 115VAC, 3 wires , no cord.

• self-priming up to 9 vertical lift feet
• used in delivery and transfer of liquid applications up to 3 GPM (11.4LPM)
• 1/2" MPT, 115VAC 60Hz, non-corded 3 wires, built-in check valve prevents back flow of fluid
• built-in pressure switch, turn on/off at 45psi, adjustable pressure setting
• Santoprene valves and diaphragm

User questions & answers

Question:	Is this pump built to run continuously for long periods of time with water temperatures of 90 degrees or will it overheat
Answer:	S7 edge doesn't has USB C port, so it couldn's work for s7 edge.
Question:	Esta bomba modelo 2088-594-154, ¿es compatible con la bomba modelo
Answer:	The brightness control and the camera all run off of the USB. You must also connect the USB to a port on the Mac, or a hub for that to work.
Question:	I can't seem to get my pump over 30 psi, i tried the screw on the front, which way should i turn it
Answer:	If your Apple cinema Display with a Mini display port, not a thunderbolt port, this adapter will work for your Mac Mini with USB C port to Mini display port on Apple cinema display as a target display.
Question:	What are the inlet and outlet fittings? Will they fit a garden hose
Answer:	Yes, it will work, but please make sure you will use the extra mini dp to mini dp cable to connect our adapter and display, not a thunderbolt cable. Both 2 cable look like same.

Product description

SEAFLO 33-Series Industrial Water Pressure Pump and Accumulator Tank System w/ Power Plug - 115V AC, 3.3 GPM, 45 PSI, 2 Gallon Tank

Introduction

The 115V 33-Series is our industrial level water pressure pump. It provides high volume water flow with reduced pump cycling thanks to the three -chamber diaphragm and a 2 gallon accumulator tank. It provides up to 3.3 gallons per minute. The 33-Series pumps are self-priming, can run dry without damage, and are performance reliable. The added ease of use thanks to the included power plug removes any added hard wiring as oppose to many other pumps on the market. This automatic demand water system pump has a built-in pressure switch which automatically starts and stops the pump when the faucet is opened and closed. They are easy to install, service, and winterize. This pump works best when paired with the included SEAFLO Accumulator Tank.

Technical Specifications

Voltage: 115 VDC

Dimensions: 8.25" X 5.30" X 6.0"

Inlet / Outlet: 1/2″-14 MNPT

Flow Rate: 3.3 GPM

Amps: 0.75 A (MAX 1.2 A)

Shut-off Pressure: 45 PSI

Weight: 8.9 lbs

• 115V AC, 3.3 GPM, 45 PSI, 1.2A Max Draw Pump, UL 778 & CSA 22.2 Certified
• Includes Pump, Accumulator Tank, Fittings, and Strainer
• Run Dry Capable, Self-Priming, Reduces Cycling, Continuous Duty
• Easily plugs into standard US outlet, no need for hard wiring
• 4-Year Warranty

User questions & answers

Question:	can it lift water about 2 feet? our water source is a IBC Tote. the output of the tote is 2 feet below the input of the pump. will this work
Answer:	We just put in 18’ well and pump had to be primed but drew water up to kitchen sink
Question:	Can you screw on a 1/2 FIP to the output valve instead of the included one
Answer:	Yes, the fitting is plastic and I believe the unit is recommended to be connected flex line.

Product description

BE Pressure WP-2065HL 2" Water Transfer Pump, 6.5HP, 158GPM. Features include Centrifugal Aluminum Pump, Heavy Duty Cast Iron Impeller, Recoil Start and Low Oil alert.

• 196cc Honda GX200 Engine
• 2" Intake Connection MNPT
• 2" Outlet Connection MNPT
• 158 GPM Max Flow
• 82' Total Lift, 26' Suction Lift

User questions & answers

Question:	Can the output be reduced down to a 1-1/2" or 1" fire hose
Answer:	yes, but pump rpm will need to be under 780 rpm!
Question:	Can this motor and pump be used to transfer diesel? How long will the seals last
Answer:	225lb and it will be on a pallet!
Question:	What does hp mean? New to this sorry
Answer:	Back to the front of flywheel 7.75 from left to right 9" both from center hole
Question:	Is this pump self prime
Answer:	Flywheel Dia./Groove: 17"/429mm/2B
Question:	Can I use this pump with a 7.5hp motor
Answer:	This pump has an intermittent duty cycle, so, no it is not built to run continuously.
Question:	What is the weight and dimensions of the box
Answer:	Si es lo mismo
Question:	Can someone provide the mounting dimensions
Answer:	on the front--or the top? the pressure screw is a little allen key thing, not a phillips screw...and it goes to the right, but Shurflo told me to never trn it more than a quarter turn at a time, and never more than a full revolution
Question:	what is the pully dia on this pump
Answer:	The fittings are common pipe thread, that is different than a garden hose. As said above you can get adapters to use a garden hose. Hot Tip: common 3/4" garden hose can be used as follows With a PVC pipe fitting you use a short piece of 1/2" PVC pipe as an outlet. Then cut the fitting off of a common 3/4" garden hose, slip the end over the PVC, and use hose clamps. Put the hose in hot water for a few minutes until it is soft, then slip it on a few inches.

Product description

Air-Operated Double Diaphragm Pump Aluminum 35 GPM Double Diaphragm with 1 inch Inlet and Outlet Diaphragm Pump Max 120PSI (QBY4-25L) This diaphragm pump is about 35 GPM Air-Operated Double Diaphragm Pump with 1 Inch Inlet And Outlet. This powerful air-operated double diaphragm pump QBY4-25L features a 1in. inlet and 1in. outlet capable of pumping up to 35 gallons/min at temperatures up to 150 degrees F. Perfect for use with water. Ideal for use with low viscosity petroleum fluids including diesel, kerosene, motor oil and some waste oil. Can not use for corrosive liquid! ! ! Feature: Brand new with top quality Air-operated double diaphragm pump With 1 inch inlet and outlet 1/2 Inch air inlet 1/8 Inch max diameter suspended solids Perfect for use with water Ideal for use with low viscosity petroleum fluids Solid construction Two years Specifications: Product: Diaphragm pump Type: Double diaphragm Operation Type: Air-operated Model: QBY4-25L Body Material: Aluminum Inlet Port: 1 inch(25 mm) Outlet Port: 1 inch(25 mm) Air Inlet Size: NPT 1/2 inch(12. 7 mm) Average Air Consumption: 38 CFM Max Flow Rate: 9 m3/h(35 GPM) Suction: 0-5 m(0-16. 4 ft.) Max Suspended Solids: 3 mm(1/8 inch) Max Head: 84 m(275. 59 ft.) Max PSI: 120 psi Max Temp: 150℉ Self-Priming Dry: 3 m(10 ft.) Self-Priming Wet: 4. 6 m(15 ft.) Manifold Connection: Single Valve Type: Ball Material: Acetal Check Seat Material: Polypropylene Diaphragm Material: Nitrile Package Size: 35 x 26 x 23 cm(13. 78 x 10. 24 x 9. 06 inch) Gross Weight: 9. 86 kg(21. 74 lbs.) Package Content: 1 x Air-Operated Double Diaphragm Pump 1 x Product Manual

• ♔【MAIN PARAMETER】~Material: Aluminum; Diaphragm Material: Nitrile; Type: Double diaphragm; Operation Type: Air-operated; Inlet/Outlet Port Size/Standard：1 inch (25 mm); Air Inlet Size: NPT 1/2 inch (12. 7 mm)
• ♔【Quality Performance ~Maximum Head：275. 59FT/84M, Max Pressure: 120PSI. Max Temp : 150 ℉. Top quality glyd ring, a double-acting seal that delivers better performance. 1/2 inch air inlet with NPT fitting uses standard shop air for easy operation.
• ♔【UNIQUE DESIGN】~Features an externally serviceable air distribution system and all-bolted construction. Modular air valve is stall-free, this low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time.
• ♔【EXCELLENT CONSTRUCTION】~Rugged construction - resists corrosion for reliable performance and long life. Bolted construction is designed for leak-free fluid handling.
• ♔【VERSATILE USE】~The diaphragm pump with convenient operating are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc.

User questions & answers

Question:	gracias necesito saber si esta bomba es resistente para bombeo de combustibles con etanol y bio combustibles
Answer:	I am not sure if it is a high pressure valve or not.
Question:	Where woukd i find a rebuild kit for this pump if i needed one? Any part numbers or kits
Answer:	1/4" NPT male on one side, 1/4" NPT female on the other. Male threads on the valve will also work with ball socket fittings which are NOT the same as flare fittings.

Product features

High-Quality Diaphragm Pump

This air-operated double diaphragm pump is constructed with high-quality aluminum with good abrasion resistance, chemical resistance, and heat resistance. It is perfect for all your needs in every industry.

PTFE Double Diaphragm

This double diaphragm pump boasts Nitrile diaphragm with max flow rate of 35GPM, Max head 275.59 ft, 1" Inlet/Outlets, an Air Inlet of 1/2" NPT.

Conveying Materials

Perfect for use with water. Ideal for use with low viscosity petroleum fluids including diesel, kerosene, motor oil and some waste oil.

Sealed Ball Valve

Easy access to ball checks and fluid caps for maintenance and repairs. Motor design delivers optimum air efficiency. "Unbalanced" air valve ensures no-stall operation.

All-Bolted Construction

This diaphragm pump is constructed with all-bolted construction for leak-free fluid handling. Mounting brackets for convenient installation.

Wide Application

Can be widely used in Mining industry, pharmaceutical industry, construction industry, petrochemical industry, water treatment, etc.

• [Enhanced performance] 115VAC 3.3GPM 45PSI self-priming water pump with a self-priming suction of 9.8 feet and a lift up to 98 feet.
• [Adjustable pressure] Built-in adjustable pressure switch. Adjustable pressure from 17-60psi range. The factory setting is 45 psi.
• [Automatically] Automatically opens when turn on the water tap, stops when turn off the water tap. Easy to install, low noise operation.
• [Widely used] The nemesis of low water pressure. It is widely used in faucets, showers, agricultural irrigation, non-flammable liquid transportation.
• [Quality service] Enjoy a 4-year warranty. We are responsible for the product. TIP: Each of our pumps is tested and inspected before leaving the factory, It is normal to have residual water.

User questions & answers

Question:	Can it be turned on manually by wiring it into a switch, or does it have to have pressure? I just want to use it on demand intermittently
Answer:	Put whatever you want to on it by using a reducer fitting
Question:	Is the pressure strong enough to rinse soap off my car, wash my tools, clean out the bed of my truck - what is the garden hose stream/spray like
Answer:	i would not use this pump as a fuel pump. It will not have the right seals in the pump and will create an environmental mess. Look at a Fill-right pump you can get these that run off 12v or 110v. There are bigger pumps out there most will be electric 220v
Question:	Do i need one for each shower or will it run the whole house
Answer:	Horse power
Question:	Can it be mounted in any orientation
Answer:	These pumps are not self priming, they must be filled with water before being started.

Product features

DC HOUSE 33-Series 115VAC Fresh Water Pump

Our 33 series will perform best at both high flow and low flow. It also has a self-priming function, which can lift up to 9.8 feet of feet vertically while running quietly in any application. The pump can run idling for 30 minutes and even includes a built-in check valve.

On-demand pressure switch

Pressure can be adjusted: Open the lid on the top, turning clockwise will increase pressure and flow will decrease; turning counterclockwise will decrease pressure and flow will increase.

Tip: The built-in pressure switch is subject to the outlet pressure to automatically turn on or off. When the outlet pressure exceeds 45psi, the pump will automatically turn off itself.

Strainer

The strainer can be removed for cleaning.

Tip: The diaphragm pump can only be used to pump clean water. If the liquid contains impurities, please install a filter at the inlet.

2PCS Hose Fitting

Inlet/Outlet: 1/2"MNPT

External threaded connections with multiple fitting allow connection to ≥ 1/2" outlets, convenient to connect to any outlet.

Self-priming

The vertical self-priming is 9.8 feet, and the lift up is 98 feet.

Tip: Do not flammable liquids.

Multifunctional application

It is the best partner for RV/yacht/camping. The pump can also be used for showers, faucets, garden sprinklers, agricultural irrigation, etc.

Pressure & flow graph

Hydraulic Performance is the amount of pressure boost the pump will add to your incoming pressure at a specific flow rate. Select the best pump for your application based upon your existing incoming pressure and desired combined system pressure.

• T33 / 12V DC / 0-45 PSI Incoming Pressure
• T33 / 115V AC / 0-45 PSI Incoming Pressure
• T42 / 12V DC / 0-55 PSI Incoming Pressure
• T42 / 110V AC / 0-55 PSI Incoming Pressure

• 【ESSENTIAL PARAMETER:】 Submersible Pump voltage: 220V 50HZ;The length of cable：32.8ft;Applicable well diameter: 100mm / 4 inch; power: 2.2KW / 3HP; Pump flow: 42GPM; Pump impeller: 25PCS; Pump highest head: 630ft
• 【CONVENIENT OPERATION:】 Deep well pump with 32.8ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room
• 【APPLICABLE CONDITION:】 The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe
• 【EXCELLENT PERFORMANCE:】 Stainless steel body, a built in check valve（unsealed）, can be mounted vertically, Industrial grade heavy duty, also good for home usage. High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.
• 【WIDELY USED:】 It is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.(European Standard Plug)

User questions & answers

Question:	What is the rla , fla & lra
Answer:	Not sure about all the specifics. I'm old.. I bought it 2 years ago.I can tell you it works great. Trouble free. I ts 200 ft down.. great price fast shipping.. no flow issues. it keeps up with whatever supply I need.. hope it helps
Question:	Will this 3hp 42 gam pump work in 122° f water
Answer:	122 degree? Or 122 ft? Mine is 200ft down works really good.i hope it helps
Question:	donde se pueden ver las curvas de eficiencia y funcionamiento
Answer:	Este artículo me llegó roto y nunca me reembolsaron
Question:	doesit come with wier and how long is the wier thanks tony
Answer:	You have to measure how deep the well is and to your circuit breaker. Really doesn't sound like your sure how to do it. Maybe you should hire someone. We sent back the one we got, it was the wrong size!!

Product features

Stainless Steel Body

This stainless steel submersible water pump is with a connection box with a switch. The pump housing and drive housing are made of stainless steel. All water-bearing parts are made of stainless steel.

Large Flow & High Head Lift

The flow rate is of max.42GPM and the highest head can reach 630 ft. More convenient and efficient to use water. Patented impeller provides high flow up and high head, for better performance and longer life.

Multiple Filtration Mesh

The stainless steel mesh is designed to filter impurities. If the excessive granular sediment is from a newly drilled well, it is recommended to add a layer of gauze inlet in front of the filtration system to immerse in the water to avoid long idle rotation.

High-Quality Motor & Rotor

The built-in thermal protector automatically stops the pump when an abnormal operation such as an overload of the card machine. The fixed-rotor uses a steel strip with high silicon content with high dimensional accuracy and good surface quality.

Superior Details

The 4-wire design provides a control box for easy provision and energy efficiency. Fits in a 4" well casing.

Wide Application

Our deep well pump is ideal for the supply of fresh water to rural homes, farms, and cabins.

Stainless Steel Submersible Well Pump

The 3 HP Deep well pump is widely used in industrial and home use. Our Deep well pump’s maxing head is 630 ft, and it is made of stainless steel for greater durability, giving you a class-leading flow rate, keeping you in flow for years to come. 3HP motor makes it powerful enough to pump water that is up to 630 feet in depth. The patented impeller design provides extended pump life and heavy flow under severe circumstances.

• 【ESSENTIAL PARAMETER:】 Submersible Pump voltage: 110V 60HZ; The length of cable 131ft;applicable well diameter: 100mm / 4 inch; power: 1.1KW / 1.5HP; Pump flow: 24GPM; Pump impeller: 14PCS; Pump highest head: 390ft
• 【CONVENIENT OPERATION:】 Deep well pump with 131ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room
• 【APPLICABLE CONDITION:】 The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe
• 【EXCELLENT PERFORMANCE:】 Stainless steel body, a built in check valve（unsealed）, can be mounted vertically, Industrial grade heavy duty, also good for home usage. High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.
• 【WIDELY USED:】 It is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.

User questions & answers

Question:	Can this pump be operated in a horrizonal position without incuring extra wear
Answer:	HI, yes, the starting capacitor is built in, kind regards - Oscar PREMIUMPUMPSUSA
Question:	Cuantas pulgadas es ala salida de agua y si puede un generador con ella
Answer:	I just measured my 4" ABS line and it is really only 3 7/8". It is a 43' deep drywell...straight line. Will this easily slide through?
Question:	this pump is 60 HZ
Answer:	No, es fabricada en U.S.A.
Question:	Is this pump 110v or 220v ? it shows both on page. happybuy well pump 1.5 hp submersible well pump 330ft head 24gpm stainless steel deep well pump
Answer:	Specs says it is single phase. Have not connected mine yet to verify, but the wiring surely indicates it is 1 phase.

Product features

Stainless Steel Body

This stainless steel submersible water pump is with a connection box with a switch. Both the pump housing and the drive housing are made of stainless steel to ensure that the pump is highly resistant to corrosion.

Large Flow & High Head Lift

The flow rate is of max. 24 GPM and the highest head can reach 380 ft. More convenient and efficient to use water. Patented impeller provides high flow up and high head, for better performance and longer life.

Multiple Filtration Mesh

The stainless steel mesh is designed to filter impurities. If the excessive granular sediment is from a newly drilled well, it is recommended to add a layer of gauze inlet in front of the filtration system to immerse in the water to avoid long idle rotation.

High-Quality Motor & Rotor

The built-in thermal protector automatically stops the pump when an abnormal operation such as an overload of the card machine. The fixed-rotor uses a steel strip with high silicon content with high dimensional accuracy and good surface quality.

Superior Details

This has a connection box with switch and mains connection and a hose or pipe connection (top) thread. 131 ft copper core wire for strong electrical conductivity plug can be linked to the power supply.

Wide Application

Our deep well pump is ideal for the supply of fresh water to rural homes, farms, and cabins.

Stainless Steel Submersible Well Pump

The 1.5hp Submersible Deep Well Water pump gives you a class-leading flow rate, producing a consistent flow rate at up to dizzying 380 ft depth under surface. Manufactured from 304-grade stainless steel, this submersible pump is a durable workhorse that will keep you in flow for years to come.

• 【ESSENTIAL PARAMETER: 】 Submersible Pump voltage: 220V 50HZ; The length of cable：5ft; Applicable well diameter: 100mm / 4 inch; Power: 0. 37KW / 0. 5HP; Pump flow: 25GPM; Pump impeller: 6PCS; Pump highest head: 150ft
• 【CONVENIENT OPERATION: 】 Deep well pump with 5ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room
• 【APPLICABLE CONDITION: 】 The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe
• 【EXCELLENT PERFORMANCE: 】 Stainless steel body, a built in check valve unsealed）, can be mounted vertically, Industrial grade heavy duty, also good for home usage
• 【ATTENTION: 】 the voltage of this deep well pump is 220V/ 50HZ , not the normal household voltage(110V) in the US

User questions & answers

Question:	I need a 1 phase1/2 hp 230 volt 2 wire
Answer:	It’s an electrical cable. Note the wire.
Question:	Is there anyway to expidite delivery of my orders
Answer:	this pump does not turn off automatically you have to install an extra damper
Question:	i have a 3 wire pump how do i hook it up to this pump with a plug in
Answer:	what size motor do you have? Make sure you connect it right.It might run but not at the right speed.Thats,why is not pulling water.
Question:	how many pounds of pressure will a 1\2 hp,submersible pump go to
Answer:	Your tank could be water logged in other words to much water in tank no room for air

Product features

Stainless Steel Body

This stainless steel submersible water pump is with a built in check valve made from stainless steel ensure that the pump is highly resistant to corrosion.

Large Flow & High Head Lift

Powerful flow with 25.5 GPM and the highest head can reach 164ft. More convenient and efficient to use water. Patented impeller provides high flow up and high head, for better performance and longer life.

Multiple Filtration Mesh

The stainless steel mesh is designed to filter impurities. If the excessive granular sediment is from a newly drilled well, it is recommended to add a layer of gauze inlet in front of the filtration system to immerse in the water to avoid long idle rotation.

High Quality Motor & Rotor

Built-in thermal protector automatically stops the pump when abnormal operation such as overload of the card machine. The fixed-rotor uses steel strip with high silicon content with high dimensional accuracy and good surface quality.

Superior Details

Large pump output for easy to connect hose or hard pipe. Sling hole used for wire rope, nylon rope. 4.9ft copper core wire with double rubber power cord for strong electrical conductivity plug can be linked to power supply.

Wide Application

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells.

Stainless Steel Submersible Well Pump

Manufactured from 304-grade stainless steel, this submersible pump is a durable workhorse that will keep you in flow for years to come. The 0.5hp deep well pump gives you a class-leading flow rate, producing an provides a consistent flow rate at up to dizzying 164ft depth under surface. Only requiring a borehole of 100mm, your Submersible Pump minimizes the work needed to reach the water.

• ✦【Commercial-grade Dehumidifier】This commercial dehumidifier with 386 CFM airflow volume can remove up to 190 pints of moisture from the air per day at saturation (90°F, 90%) (93 PPD @ AHAM), ideal for flood & water damage restoration, carpet cleaning, fast drying in indoor gardening/greenhouse/pool/spa, construction areas, marine environments and large spaces up to 6,000 sq ft.
• ✦【Dehumidifier with Pump】Featuring an internal heavy-duty condensate pump of 15 ft drain height connecting with a 17 ft wrinkle-free long drain hose (included), this self-draining industrial dehumidifier will automatically drain the condensation water to anywhere you want, meanwhile ensuring you are always on the top of operation without downtime.
• ✦【Superior Durability】Roto-molded housing is much better on resisting dents, abrasion, and corrosion than metal housing while protecting the delicate interior components from any impact damage. This ETL listed water damage dehumidifier is also backed with a 2-year free warranty (5-year on housing) to ensure maximum lifespan that lasts several years.
• ✦【Plug-and-go Operation】All you need to do is to plug it in, turn it on, no further manual adjustment is required. The LCD screen displays the humidity level and the temperature of both inlet and outlet as well as the job hours for better management of job site progress. The auto-restart on power failure and auto HGV defrost features allow less supervision.
• ✦【Easy to Transport & Store】The large semi-pneumatic wheels and rigid handle make this large dehumidifier portable from job sites to job sites, even from downstairs to upstairs. The long PVC drain hose (17 ft) and power cord (25 ft), adding ultimate flexibility for installation, can be wrapped on the winders on the back, the handle is foldable and the rugged housing is stackable, saving valuable spaces for both storage and transportation.

User questions & answers

Question:	Would this work well for an indoor pool room
Answer:	It pumps on demand (low or no outlet pressure). At an outlet pressure of 45psi , it shuts off.
Question:	Could this be ran in the house at night while you sleep how loud is it
Answer:	It is not like the city water pressure if that’s what you’re asking. It will depend on the spray fitting you use on the end of your hose. It has decent pressure but again it is not city water pressure.
Question:	How long is the drain hose, can it pump water out of basement
Answer:	That depends on what you have prior to the pumps. How much flow,and how much pressure do you have before adding the pump. If you have no city provided water pressure then you will probably want a larger pump for the entire house!! If you are only using for a very small homestead then this would work in a pinch. It’s not designed to run an entire house,not even close.
Question:	Any warranty and how can I access warranty service
Answer:	My husband says it can. Hope this helps.

Product features

Tough Enough for Professionals, Simple Enough for Domestic Uses

COLZER TR160D offers the right solutions for any job without any complicated or confusing settings or unnecessary features.

Simply plug it in, and press the POWER button to turn it on, this automatic dehumidifier will automatically enter into work mode and work hard continuously without you worrying about it.

Internal Condensate Pump for Effortless Drainage

Removing large amounts of moisture can be tough, especially in commercial spaces. But to this restoration dehumidifier with a heavy-duty internal pump and a long drain hose, it won't be a problem anymore.

During operation, this self-draining dehumidifier will automatically purge the collected condensation water out to a bucket, sink, out a window, or anywhere else that water can drain safely.

✔ Drain Height: 15 ft

✔ Drain Hose Length: 17 ft

✔ Hose with Quick-fitting Connector

✔ Fast Access for Pump Maintenance

Rotomolded Housing - Ideal for Rugged Use for Years

If you’re looking for a unit that can withstand the rigors of the toughest conditions, you won't go wrong with this COLZER TR160D roto-molded dehumidifier.

COLZER TR160D is constructed with rugged rotomolded polyethylene housing which is much more durable than the metal housing of conventional commercial dehumidifiers.

The rugged roto-molded housing could reduce the impact of bumps or accidental drops during transportation, ensuring maximum lifespan.

The roto-molded housing is dent, scratch, chemicals and corrosion resistant, maintaining the original looking of your dehumidifier after years of use.

HAV Defrosting for Low-temp Operation

This commercial size dehumidifier is equipped with HGV defrosting system that delivers fast and efficient frost removal from the coils without experiencing stoppages that are common in other compressor dehumidifiers during the defrosting process, optimizing the dehumidification efficiency.

This commercial-grade dehumidifier with better defrost abilities is capable of removing water even in low-temperature environments as 33°F, being reliable solutions for restoration tasks.

Easy to Move, Simple to Store

Moving a large dehumidifier from job site to job site or storing equipment can be a real hassle. But, that is NOT for COLZER TR160D.

The semi-pneumatic wheels and rigid handlebar allow for easy maneuvering around corners, stairs, and furniture.

The stackable housing and collapsible handle save valuable space during transportation and storage.

The winder and strap on the back help to keep the long power cord and drain pipe neat and safe when not in use.

Reusable Filter for Easy Maintenance

This industrial size dehumidifier comes with a high-density filter to protect internal components from damage due to airborne dust, debris, and other particles, ensuring a long lifespan.

Meanwhile, this high-airflow air filter ensures maximum airflow (386 CFM) throughout the operation for optimal moisture removal results.

Besides, this air filter is easily accessible, vacuum-able, washable, and reusable, saving you the cost and hassle of the replacement filter.

• 【ESSENTIAL PARAMETER:】 Submersible Pump voltage: 220V 50HZ; The length of cable：131ft;Applicable well diameter: 100mm / 4 inch; power: 1.1KW / 1.5HP; Pump flow: 24GPM; Pump impeller: 14PCS; Pump highest head: 335ft
• 【CONVENIENT OPERATION:】 Deep well pump with 131ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room
• 【APPLICABLE CONDITION:】 The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe
• 【EXCELLENT PERFORMANCE:】 Stainless steel body, a built in check valve（unsealed）, can be mounted vertically, Industrial grade heavy duty, also good for home usage. High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.
• 【WIDELY USED:】 It is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.

User questions & answers

Question:	Is the 131 ft cable the electric cable or is it just a cable
Answer:	It depends on a few factors. Pressure switch settings. 20/40 or 30/50. Also depends how deep you are going. For example at 30 feet it is 18 GPM at 120 feet it is only 1 GPM
Question:	Does this pump turn on and off automatically with water in the well? I'm looking for a pump to pull water away from the foundation of my pool
Answer:	Yes, mine is running on 115. You have to remove the back cover on the end of the motor. on mine there was a selector switch that you turn to either 230 or 115. The owners manual will give good description on how to do this. We found that the wires connected to the selector switch were not tightly secured to the switch , once we tightened them everything worked fine.
Question:	I bought the 1/1/2 in pump and it will not pump water, it runs but no water, my well is 66ft ,watewr level is at16ft,What now
Answer:	No it does not you can plug the bottom hole and make it a centrifucle pump if you water table is high enough and it is 11/4 in both holes
Question:	Pump keeps shutting off. i reset it, doesn't take but 3 minutes to shut back off again. how can i fix this
Answer:	Maximum will be 110 feet.

Product features

Stainless Steel Body

This stainless steel submersible water pump is with a connection box with a switch. Both the pump housing and the drive housing are made of stainless steel to ensure that the pump is highly resistant to corrosion.

Large Flow & High Head Lift

The flow rate is of max. 25.5 GPM and the highest head can reach 341 ft. More convenient and efficient to use water. Patented impeller provides high flow up and high head, for better performance and longer life.

Multiple Filtration Mesh

The stainless steel mesh is designed to filter impurities. If the excessive granular sediment is from a newly drilled well, it is recommended to add a layer of gauze inlet in front of the filtration system to immerse in the water to avoid long idle rotation.

High-Quality Motor & Rotor

The built-in thermal protector automatically stops the pump when an abnormal operation such as an overload of the card machine. The fixed-rotor uses a steel strip with high silicon content with high dimensional accuracy and good surface quality.

Superior Details

This has a connection box with switch and mains connection and a hose or pipe connection (top) thread. 131 ft copper core wire for strong electrical conductivity plug can be linked to the power supply.

Wide Application

Our deep well pump is ideal for the supply of fresh water to rural homes, farms, and cabins.

Stainless Steel Submersible Well Pump

The 1.5hp Submersible Deep Well Water pump gives you a class-leading flow rate, producing a consistent flow rate at up to dizzying 341 ft depth under surface. Manufactured from 304-grade stainless steel, this submersible pump is a durable workhorse that will keep you in flow for years to come.