13 best lp tankless water heater
An LP tankless water heater, also known as a propane tankless water heater, is a type of water heating system that uses liquid propane (LP) as a fuel source to heat water on-demand. These water heaters are known for their energy efficiency and the ability to provide a continuous and endless supply of hot water when needed. Here are some key points about LP tankless water heaters:
On-Demand Heating: LP tankless water heaters heat water as it flows through the unit, rather than storing and constantly reheating water in a tank. This on-demand heating process means you only heat the water you need, which can result in energy savings compared to traditional tank-style water heaters.
Propane Fuel: LP tankless water heaters are designed to run on propane gas, which is a versatile and readily available fuel source. They are commonly used in areas where natural gas lines are not accessible.
Energy Efficiency: Tankless water heaters are highly efficient because they don't suffer from standby heat loss, which occurs in traditional tank-style heaters. They only heat water when there is a demand, which can result in lower energy bills.
Continuous Hot Water: LP tankless water heaters can provide a continuous supply of hot water as long as there is propane available. This makes them ideal for homes with high hot water demand, such as those with multiple bathrooms or appliances that require hot water.
Space-Saving: Tankless water heaters are compact and take up less space than traditional water heaters with storage tanks.This can be beneficial for homeowners with limited space.
Installation: Installing an LP tankless water heater may require professional installation, as it involves gas lines and venting. Proper sizing and installation are essential to ensure efficient operation.
Variety of Models: There are various LP tankless water heater models available with different flow rates and capabilities. It's important to choose a model that suits your household's hot water needs.
Maintenance: Regular maintenance is recommended to ensure the continued efficiency and longevity of an LP tankless water heater. This may involve flushing the unit to remove mineral deposits and checking for any issues with the propane supply.
Cost Considerations: LP tankless water heaters can have a higher upfront cost compared to traditional water heaters. However, the potential energy savings over time may offset the initial investment.
Environmental Impact: LP tankless water heaters are considered more environmentally friendly than traditional tank-style water heaters due to their energy efficiency and reduced greenhouse gas emissions.
LP tankless water heaters are a popular choice for homeowners looking to save on energy costs while enjoying a continuous supply of hot water. When considering one for your home, it's essential to assess your hot water needs, budget, and installation requirements to choose the right unit for your specific situation.
Below you can find our editor's choice of the best lp tankless water heater on the marketProduct description
Rinnai V53DeP Tankless Water Heaters, 5.3 GPM, V53DeP-Propane/5.3
- Endless hot water for your entire home
- V53DeP HE High Efficiency Tankless Hot Water Heater - Propane: Outdoor Installation Only
- Up to 5.3 GPM hot water flow rate (varies by groundwater temp)
- Control-R 2.0 mobile app features timers and schedules throughout the day and allows you to remotely put the system into vacation mode.
- Residential Factory Warranty - 120 months (heat exchanger), 12 months (labor), 60 months (parts)
User questions & answers
Question: | Can the temperature output be adjusted to 105F |
Answer: | Sinks have aerators to slow down the water where a tub doesn't. It sounds like one possibility is that your exceeding the GPM for this heater. Next possibility, double check an measure your actually getting at least 240v at the heater, I had an issue where my unit was only getting 235v an it was causing a similar issue where only one of the two heating elements was activating. I had it set to 125F but it was coming out 100F. It was warm and without a meter I would of thought it was working correctly until I tried filling a tub. It couldn't even get the water warm. I pulled my wires out an restripped an cut an screwed them in an it fixed my problem, now its measuring around 245v. Make sure there is no copper showing after screwing down your input wires. Now filling the tub I noticed after about 10-15 seconds the water gets too hot to touch. I set it to 135F. |
Question: | Can I use the Rinnai V65EP in Denver, Co? Temperatures during the winter can get below zero |
Answer: | No tank, so, no overflow line required. It mounts on the wall. A pan is needed if required by building code in your city. |
Question: | Does this unit come with controller? rinnai tech said i needed a mc-91-2us controller? do i need to buy separate |
Answer: | good morning,60 amp breaker and , number 6 cable !thank you have a great day! |
Question: | What does the "Low NOx Mean |
Answer: | Hello-The RTEX-13 requires 1x 60A@240V breaker / 6 AWG recommended wire size.Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=Specification-Sheet&id=fc3235b7-7cd0-42cd-93bc-7169ea92be31 Rheem 800-432-8373I hope this helped :)Ben |
Question: | We have a 500sq' apt. 1 kitchen sink, 1 lav sink and tub/shower. This tankless heats water to both sinks but nothing to the tub/sh. Help |
Answer: | It’s next to the side cover on the front of the picture shown. The circle next to the cover is the hole for the 3/8 fitting and wire to go through. |
Question: | Do these tankless water heaters require an overflow line to the outside of the home or a pan like is required on normal water heaters |
Answer: | I believe it draws nearly 1800 watts ( 15 amps at 120 volts). Mine took about 6 days to arrive at a rural location in Central Wisconsin. |
Question: | what are the wiring and power requirements |
Answer: | To be honest I would not buy it. It came dented like it fell off the. Truck.. No support from ups, amazon or manufacture . I had no choice but to install it. Holding my breath.... It's up to you..... it came bare bones.... |
Question: | How many amps are needed for rheem rtex - 13 240v heating tankless electric water heater |
Answer: | Not a 220v. This is 2000 watts, 120 volt //Amps 16.67 (20 amp) |
Product features
About Us
Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925. While the company has produced a number of products in its nearly 100 years of operation, Rheem is currently the manufacturer that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is one of the largest manufacturer of water heating products in North America.
Endless Hot Water
Put an end to scheduling your hot water need.
- Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.
Hot Water On-Demand
Don't waste while you wait.
- Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
- While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.
Save Valuable Space
Your hot water heater doesn't have to be a behemoth!
- Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
- Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.
Affordable, Efficient Savings
Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.
- Use 40% less energy than traditional tanks* because you heat water only when you need it.
100 years of Confidence
Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.
- Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
- Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.
Sustainable Reliability
It's a smart investment for now and the future when you intertwine sustainability and reliability.
- Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
- Average life expectancy is 20 years vs. 8-10 for a traditional tank**
- With this premium product, you'll save–both money and worry–in the long run.
Product description
1.The Camplux CA318 is perfect for vacation cabins, cottages, and smaller homes.
2.This model has a sleek, black tempered glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading.
3.It comes with a horizontal stainless steel vent pipe, ready to install and with its 120-volt power cord powering the internal exhaust fan and digital display.
4. For indoor installation with safe, efficient power ventilation. Stainless vent pipe included.
5 It delivers up to 3.18 Gallons Per Minute of hot water ranging from 95-149 degrees Fahrenheit(35-65 degress Celsius).
6.The ideal low water pressure operating range for the Camplux CA318 is 3.6~145.0 PSI, work easily with great performance.
7.The operating propane gas pressure is 0.4PSI with maximum power output 82,000btu/hour.
8. It only generates about 42 watts and 0.35 amps during operation, making it an ideal energy efficient appliance.
9. Flame failure device, anti-freezing protection and oxygen depletion safety shutoff protection.
10.The gas water heater can\'t be used for drinking water.
Easy to Use
Get the instant tankless gas hot water system that\'s easy to set up and use!
1. Install the tankless gas water heater on the wall.
2. Install the stainless steel vent pipe.
3. Connect shower hose and shower head to the hot water outlet.
4. Connect water hose to the water inlet.
5. Connect gas pipe to the gas inlet.
6. Plug in the power cord.
7. Turn on water tap and enjoy instant hot water!.
What\'s in the Box
1 x Camplux hot water system
1 x Gas inlet connectors 1/2" BSP Female x 5/8" UNF inverted flare male
1 x stainless steel vent pipe
1 x accessories package(included water tape & fixing screws )
1 x instruction manual
Inquiry & aftersales service: [email protected]
Service hotline: 844-538-7475
- Sleek,Modern,Compact Design -Trendy and modern design with unique black glassy front panel featuring an easy to use LED touchscreen controls with Fahrenheit Digital & Display. (Fahrenheit and Celsius switch optional) .The compact size - (L)14.4 x (W)4.7 x (H)25.4 inch tankless water heater saves more space than traditional tanks.
- Instant Tankless Water Heater -High water capacity range 0.8 - 4.8 GPM, Camplux high efficiency 3.18 GPM propane tankless water heater delivers 3.18 gallons per minute of on-demand endless hot water ensures instant hot water for 2-3 persons home comfortable shower.
- Multiple Protection Ensure Your Safety- Dry combustion,flame failure device, anti-freezing protection, over heating protection to ensure your safety. Fully automatic temperature controls with an energy saving mode and child lock technology.
- Convenient, Easy Installation -Uses standard 1/2" NPT water fittings and comes with 2.3 inch horizontal venting pipe allowing for convenient and quick installation,great for whole home,small cabins and remote apartments use. You can take Camplux customized wall thimble-WT236 for perfect indoor use.
- Considerate Customer Service- Here at Camplux, customer service is everything! We offer 24 shift hours customer service make the customer experience easy and fast through our live chat, phone support & our online helpdesk.
Product features
Features-
- The Camplux CA318 is perfect for whole house use,rated at 3.18 GPM that activates only on demand.
- This model has a sleek, black tempered glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading.
- Comes with a horizontal stainless steel vent pipe, ready to install and with its 120-volt power cord powering the internal exhaust fan and digital display.
- For indoor installation with safe, efficient power ventilation. Stainless vent pipe included.
- It delivers up to 3.18 Gallons Per Minute of hot water ranging from 95-149 degrees Fahrenheit(35-65 degress Celsius).
- The ideal water pressure operating range for the Camplux CA318 is 3.6~145.0 PSI, work easily with great performance.
- The operating propane gas pressure is 0.4PSI with maximum power output 82,000btu/hour.
- It only generates about 42 watts and 0.35 amps during operation, making it an ideal energy efficient appliance.
- Flame failure device, anti-freezing protection and oxygen depletion safety shut-off protection.
- The camplux tankless propane water heater line was not recommend for elevation above 2000 ft.
Bullet Points of Camplux 3.18 GPM Tankess Gas Water Heater
- Trendy design with black tempered glass front panel featuring easy to use LED display controls.
- Safe electronic ignition system,anti-freezing protection,flame failure device and dry combustion protection.
- With 3.18 GPM of output hot water ranging from 95-149 degrees Fahrenheit(35-65 degrees Celsius).
- Fully automatic temperature controls, equipped with child locking technology
- True 1/2 inch NPT water fittings. Comes with a horizontal stainless steel vent pipe.
Enjoying Endless Hot Water with Camplux 3.18 GPM Tankless Gas Water Heater
The Camplux 3.18 GPM tankless water heater has a new revolutionary design, making it as the most unique tankless water heater on the market. This model features sleek black tempered glass panel, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow.It equipped with child locking technology,it’s perfect for whole house use, apartment and small homes where you need more than one hot water application at the same time. Camplux water heater with innovative combustion technology and advanced multiple protection systems to ensure your safety.
New Design,Fully Automatic Temperature Controls.
Comes with new revolutionary design, making it as the most unique tankless water heater on the market. Black tempered glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading.
Instructions for the Installation
Equipped with a horizontal stainless steel vent kit, ready to install and with its 110-volt UL listed power cord powering the internal exhaust fan and digital display. It pulls about 42 watts while idle and 0.35 Amps during operation, making it an ideal energy efficient appliance.
Comes with CSA Approved Adapters
Comes with CSA approved fittings&adapters. Camplux water heater is with innovative combustion technology and advanced multiple protection systems to ensure your safety.
Product description
V65iP is the perfect combination of high efficiency, comfort and value in a propane gas tankless water heater from Rinnai. Ideal for small to medium homes or remodels, compact, easy-to-install, reliable and perfect for indoor locations; Rinnai products provide peace of mind with warranties that surpass the competition.
From the Manufacturer
Rinnai's V65I INTERIOR-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You'll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.
- Endless hot water for your entire home
- V65iP HE High Efficiency Tankless Hot Water Heater - Propane: Indoor Installation Only
- Up to 6.5 GPM hot water flow rate (varies by groundwater temp)
- Control-R 2.0 mobile app features timers and schedules throughout the day and allows you to remotely put the system into vacation mode.
- Residential Factory Warranty - 120 months (heat exchanger), 12 months (labor), 60 months (parts)
User questions & answers
Question: | which models are "condensing" units, please |
Answer: | I don’t know. But I suggest u look for a different brand. It already failed twice in less than a year and their warranty is a scam. They provide the parts which are pennies and leave out labor. |
Question: | How does it effect the water pressure, will it change |
Answer: | It does not effect my water pressure at all. I’ve had it for over a year now |
Question: | My existing water heater is located next to and shares a flue with the furnace. Can I hook the same way on this |
Answer: | Hold up there, previous answer, not so fast. It is true that you should not have both the hot water heater and furnace venting directly into the flue, combining the exhaust. However, some people see their vent pipes entering the flue (or chimney wall) and assume they are both releasing the fumes inside the chimney. In some cases, the venting pipes continue separately up the flue. Joseph, if you have two vent pipes entering your flue, there is a chance that both pipes continue separately up the flue and out the top. If that is the case, you may be able to use the existing hot water vent system. When you look at the top of your chimney, do you see two terminations coming out? |
Question: | How does very cold intake water affect performance |
Answer: | Sorry to contradict but the temperature of the water going into the water heater will definitely have an effect on the temperature of the water coming out. the water heater needs to provide enough BTUs to heat the volume of water that you need to the water temperature that you want. If the water starts off at a lower temperature it will take more BTUs to get it to the temperature you want. This unit claims to be able to provide 6.6 gallons of hot water per minute but that assumes the water is startling an average temperature. If you have a modern shower head it will only use about 2.5 GPM but if you have second shower going, a hot water faucet open or a clothes washer filling at the same time you will run out of capacity quickly. Rinnai should have tables on their website that shows the ability of the unit to heat water at a variety of starting temperatures to a range of hot water temperatures at a given flow rate. |
Product features
Endless Hot Water
Put an end to scheduling your hot water need.
- Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.
Hot Water On-Demand
Don't waste while you wait.
- Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
- While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.
Save Valuable Space
Your hot water heater doesn't have to be a behemoth!
- Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
- Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.
Affordable, Efficient Savings
Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.
- Use 40% less energy than traditional tanks* because you heat water only when you need it.
100 years of Confidence
Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.
- Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
- Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.
Sustainable Reliability
It's a smart investment for now and the future when you intertwine sustainability and reliability.
- Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
- Average life expectancy is 20 years vs. 8-10 for a traditional tank**
- With this premium product, you'll save–both money and worry–in the long run.
Product description
non-Condensing Tankless Water Heater
From the Manufacturer
Stop planning your mornings and evenings around your water heater. Set your own schedule, thanks to the R75LSi. Ideal for two- to three-bathroom homes, the R75LSi delivers up to 7.5 gallons of hot water per minute (GPM), while saving energy and money. Mount your compact R75LSi in virtually any room, and vent directly to the outside with a single wall or roof penetration.
- 10,300 - 180,000 BTU
- Comes standard with MC-91-1US Digital Controller with Error Code Indicator
- 82% Thermal Efficiency
- Residential Temperature Settings: 98°F - 140°F
- Commercial Temperature Settings: 98°F - 160°F (commercial controller must be purchased separately)
User questions & answers
Question: | does anyone have long periods of cold water when adjusting the water temp while showering |
Answer: | Our brand new unit takes about 5 minutes to get hot water to the furthest room in the house and then I turn on my shower and then the sink water gets cold. |
Question: | will there be enough water for 2 or even 3 people taking showers at once |
Answer: | I live in eastern Massachusetts and this winter was exceptionally cold. This model was set at 120 degrees and easily provided hot water for 2 showers and the dishwasher at once. I am confident that it will handle 3 showers |
Question: | Can we use the same vent which is used with the old water heater tank. Outside roof vent cover can be used same existing |
Answer: | No. For this unit the exhaust is inside of a 2nd wall that is the fresh air intake Your old vent is also not big enough in diameter. |
Question: | If I get a bit too tipsy and pass out in the shower and wake up six hours later will I still have hot and toasty water |
Answer: | Yep. The water stays hot as long as you keep running water. |
Product features
Endless Hot Water
Put an end to scheduling your hot water need.
- Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.
Hot Water On-Demand
Don't waste while you wait.
- Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
- While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.
Save Valuable Space
Your hot water heater doesn't have to be a behemoth!
- Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
- Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.
Affordable, Efficient Savings
Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.
- Use 40% less energy than traditional tanks* because you heat water only when you need it.
100 years of Confidence
Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.
- Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
- Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.
Sustainable Reliability
It's a smart investment for now and the future when you intertwine sustainability and reliability.
- Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
- Average life expectancy is 20 years vs. 8-10 for a traditional tank**
- With this premium product, you'll save–both money and worry–in the long run.
Product description
Attention:
We have adapters which can convert G thread connector to NPT connector (not include in the list)
Water & gas combination unit ,Fitted with over heating and pressure safeguard
Suitable for both summer and winter
Mains power not required
Electrical requirement: DC3V, Automatic electric ignition powered by two size 'D' batteries (batteries not included); No electrical hook up; No standing pilot;
Description:
1. High efficient energy saving : the heater exchanger and main burner adopt mostly advanced energy-saving and
combustion technology to decrease gas consumption and burning noise.
2. Low water-pressured startup : the water control linkage valve makes the heater start up under low water pressure
and shortage areas and those living in high stairs.
3. Manifold auto protection : for the sake of your safety
4. Ion flame inspection : to automatically shut down gas power under unexpected flameout.
5. Over water pressure protection function : to automatically decrease pressure under excessive high water pressure.
6. Controller design : both cold water and warm water can be properly controlled
7. Magnificent thin-shaped appearance : it is designed by modern fashionable line shape.
Please confirm enough water pressure and gas pressure before using
- Gas Type: LPG Liquid Petroleum Gas (PROPANE),Capacity: 18L/min (4.8Gal), 25 degrees warm water producing rate
- Working temperature:--8-45℃,Thermal input: 36KW,Thermal efficiency:≥80%,Vent Type:4.3" Flue Duct,Panel Color: White
- Temperature rise: 25℃,Minimum working water pressure: 0.025MPa,Gas pressure: 2800Pa
- Gas pipe: G 1/2"; Water Inlet: G1/2'' ; Water Outlet: G1/2''; Cover Material: Cold Rolled Sheet;
- Automatic ignition system, Flame failure protection device,20 min. off self-timer,Gross weight: 8.5KG
User questions & answers
Question: | How hot does the water get |
Answer: | The water gets too hot to shower. Need to turn on cold water with hot . It takes some doing to get the 2 adjustments right but after you get it it works good |
Question: | can this water heater work at 8500 ft. above sea leveal |
Answer: | If your gas grill works,,then this should too. |
Question: | What gas regulator does it need |
Answer: | The regulator can be from the tank that it is hooked up to, so I would guess the standard regulator. |
Question: | Can you lay the hot water heater down or does it have to hanging |
Answer: | I think you have to hang it for the exhaust to flow out properly |
- Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver.
- For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
- Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.
- Safe electronic ignition system; plugs into standard 120v electrical outlet with UL-listed cord.
- Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.Minimum 0.65 GPM flow rate
User questions & answers
Question: | service number |
Answer: | 785-477-8702 |
Question: | How much current does it draw |
Answer: | Hello Donna. Thank you for your question. This unit uses 120v, 60Hz and draws 2 amps.If we've helped you, please prefer us when you purchase on Amazon. Kind Regards,RossGadgetsGo |
Question: | can i vent this thru a masonry chimney |
Answer: | It needs to be ported outside. |
Question: | What is the highest temperature achievable from this water heater? Will it produce temperatures in excess of 150 degrees F |
Answer: | Assuming you have everything hooked up correctly, at 3.5 GPM, the MAX TEMP will be NO MORE THAN 55 degrees ABOVE THE TEMPERATURE OF THE INCOMING WATER. For example, if the incoming water temp is 50 degrees in the winter, then the max winter temp will be 105. In the summer, when the incoming water is 65 degrees, the max summer temp will be 120 degrees. This is the way ALL demand heaters work. Be SURE to check the TEMPERATURE RISE specification on ANY demand heater to know what it is truly capable of. If the TEMP RISE is specified at 3GPM, and you try to set it higher, it may CUT BACK THE FLOW RATE to achieve the higher temp, but it will NEVER exceed the TEMP RISE spec. |
Product features
FVI12 Indoor Liquid Propane Tankless Water Heater
- Whole home indoor, propane-powered tankless water heater, that activates only when in use, making it an energy saver.
- For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
- Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.
- Safe electronic ignition system; plugs into standard 120-volt electrical outlet with UL-listed cord.
- Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.
Prefect for Cabins!
Perfect for Tiny Homes!
Perfect for Apartments!
Perfect for Businesses!
Is this the right water heater for you?
Product description
Eemax electric tank less water heaters provide endless hot water where you need it and when you need it. This product can be used for any of your residential or commercial water heating needs. The EEM24027 is a 240 volt, 27 kilowatt unit. It can produce enough hot water for up to 1 shower and 2 sinks simultaneously in colder climates. In warmer climates it can produce enough hot water for up to 4 Showers or sinks simultaneously.
- Tank less water heaters provide a continuous Supply of hot water and only heats the water you need, when you need it
- Instant, consistent and endless hot water
- The most advanced, self-modulating technology available, meaning the unit will adjust how much energy needs to be input based on how much hot water is needed
- Compact size saves valuable storage space
- Before purchase and installation, Please verify that this EEM24027 is the correct size for your hot water needs
User questions & answers
Question: | In the picture the heaters are made of copper, but you claim this is a stainless steel heater unit. I am running well water and copper is not desired |
Answer: | Mine was made with copper tubes to house the elements. We have well water not sure why you don't want copper. We use a water softner and would suggest that you should as well if you have hard water. The calcium build up doesn't have any place to fall to as in a regular water heater. |
Question: | What size of breaker would I need? I calculated like 120 amps 2 pole |
Answer: | You will need 3 - 40 amp breakers as this has 3 power inputs. |
Question: | Have had it for a year and has worked great until the digital read out will not come on and will not heat. When I put a new fuse in, it pops its |
Answer: | This shows a serious short. Have you taken the cover off and checked the wire and connections. How many heater units does it have? Does it pop when all of them are connected or just certain ones. |
Question: | How many breakers does it require |
Answer: | It requires 1 double pole breaker. I think it's a 40 amp. Uses 8 guage wire. |
Product description
"The Stiebel Eltron Tempra 24 Plus Tankless Water Heater features exclusive Advanced Flow Control German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 24 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE - ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 24 KW/18 KW; Min. recommended household electric service 150 A; Amperage draw: 2 x 50 A 2 x 44 A; Number and min. recommended size of circuit breakers: 2 x 50 A (DP); Number of runs and min. recommended wire size (copper): 2 x 6/2 AWG; Max. temperature rises: 92 F/82 F at 1.50 GPM, 73 F/54 F at 2.25 GPM, 54 F/41 F at 3.00 GPM, 37 F/27 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4"" NPT."
- CONTINUOUS FLOW – Advanced Flow Control patented technology invented by Stiebel Eltron, automatically maintains water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity. Hot showers will never be interrupted again
- SPACE & ENERGY SAVER – Its small, sleek white design saves space yet still provides endless hot water for your whole house, and no venting is required. Eco friendly unit saves energy with auto-modulation and the ability to electronically control water flow. Savings monitor even shows how much you save on energy costs
- EASY OPERATION – Electronic switch activates the hot water heater and it’s noise free while in use. Has a digital temperature display and preset temperature and memory buttons, while the interior solid copper heating system does all the power work
- TEMPRA 24 PLUS – This specific model is 24kW, 240V, requires a min recommended electric service of 150 A, and offers an output water temperature of 68° to 140°F. Check our guides below to compare features of our various Trend and Plus models, each available in different kW levels
- WARRANTIES INCLUDED – Stiebel Eltron’s top-rated electric tankless water heaters perform with the highest standards for comfort and reliability. Our 7-Year Leakage and 3-Year Parts Warranties are included with purchase
User questions & answers
Question: | How can i make tempra trend 24 work with my bosch shx33a05uc/22 dishwasher? the dishwasher will not advance to next cycle. water is not hot enough |
Answer: | This water heater activates at 0.5 GPM and will heat to your set temperature at the correct flow rate for that set temperature. Please call our Technical Department at 1-800-582-8423 Ext 6 with more details so we can help you better. (for example, does the dishwasher have its own heating element, distance between the 2 units, etc...) Thank you. |
Question: | Electric panel is ~50 feet from where i want to install the tempra 29 trend. is this distance ok for #8 thhn wire |
Answer: | The recommended wire is 8/2 and there is not a limit to distance written in the install directions. You need to check with your electrician. Make sure he is state license and insured. We have installed a Tempra 29 and our electrician ran three 8/2's approx. 30' with no question. But check with your electrician and local codes. God bless you and happy New Year. |
Question: | Is there an installation kit available for this? i am installing in a remote location & plumbing parts are not available? water lines are pvc |
Answer: | There is no specific installation kit. However, we suggest using flexible braided hose connections that screw onto the hot and cold water for the first 18" or so. These connections are easy to remove to check a filter screen or if needed to work on the unit in general. The connections are 3/4" NPT. Please feel free to call our Technical Support Department at 1-800-582-8423 ext 6 with any questions. Thank You. |
Question: | Where is it made |
Answer: | We asked the Manufacturer and they replied: "These are made in Holzminden, Germany" |
Product features
1 Find your approximate ground water temperature on the map.
2 Check the column on the table to see how many fixtures can be supplied at the same time for each model.
Product description
Compact design saves space and is easy to install almost anywhere, provide endless hot water on demand and only as needed. Marey´s unit has a maximum input rating of 34,120 BTU/h and will provide a flow rate of up to 1.89 GPM output. The unit is flow activated and no electrical connection is required; perfect for off grid applications. Its small to medium water production is ideal for indoor usage, apartment, cabins and tiny homes. You are able to control your temperature all year round with a convenient summer/winter switch. Adjustable manual temperature control, multiple safety sensors including overhead and anti-dry heating. It is not recommended for elevations above 2,000 feet. Product Features: No electrical connection is required, pulsse ignition, powered by D batteries. Flow activated, adjustable manual temperature control, multiple safety sensors including auto cut-off, automatic ignition, anti-dry combustion, over-pressure, overheating, flame out protection, twin solenoid valves. Control your temperature all year round with a convenient summer/ winter switch Bullet points No electrical connection is required, pluse ignition, powered by D batteries. Water-controlled automatic ignition; Auto-cut off protection; This unit provides more comfort and energy savings in the form of lower gas consumption in warmer months; Requires very low water pressure to activate; Sufficient flow is always required to keep the overheat safety sensor from shutting the unit off; Anti-freezing protection; Anti-dry combustion protection; Over-pressure protection(when water pressure is over 145 PSI); Compact design saves space and is easy to install almost anywhere
- Flow activated tankless water heater
Product description
3/4 IPS LEAD FREE ISOLATOR EXP E2 w/LEAD FREE PRESSURE RELIEF VALVE TANKLESS WATER HEATER SERVICE VALVES - HOT & COLD SET - FULL PORT BRASS BALL VALVES w/ADJUSTABLE PACKING GLAND, HI-FLOW HOSE DRAINS (500 WOG) & PRESSURE RELIEF VALVE (150 PSI/200K BTU)
From the Manufacturer
Hot and cold set of full port forged brass ball valves with hi-flow hose drains and pressure relief valve outlet.
- Lead Free - Meets all federal & state standards for lead levels in drinking water system components.
- Size is 3/4in
- Tankless Water Heater Service Valves
- 1 per carton - 10 per case - Individually Priced & Sold
- Includes a residential pressure relief valve (150 PSI/200,000 BTU)
- 500 WOG
- 4444 series - IPS Union x IPS
User questions & answers
Question: | Hi. is this compatible with ecosmart tankless models |
Answer: | The box come with controler and water valve kit. It is perfect. |
Question: | Will this work with a noritz nrc661-dv-ng tankless water heater? thank you |
Answer: | No it should NOT be installed in a garage. That is considered indoors. An outdoor model needs to be mounted outside to exhaust. |
Question: | Hi, the valve kit needs Male NPT thread at both ends, is it right ? Thanks |
Answer: | I do not believe so because they are different model numbers. |
Question: | What is the difference between this one and RTG20220AB? Can I buy this instead of RTG20220AB |
Answer: | I do not have recirculation setup yet. I believe this unit comes with the control functionality for recirculating but that you still need to install your own pump inline with the return water line. |
- 【Enjoy & Comfortable Constant Hot Water】This residential model is powered by 120 VAC voltage, features imported PCB with precise temperature control, never blow hot and cold in turn, on-demand hot water, double adjustment of water and air, and rising of the third gear making it perfect for a hot shower at home!Camplux CA528 can produce a quick endless hot shower for years to come! Please take the Camplux customized vent pipe CP-70 together for better performance.
- 【Smart& Energy Saving】PCB frequency conversion intelligent control, temperature intelligent adjustment, environmental protection and durability, truly outstanding energy saving. Man-machine dialogue, heating without waiting. This residential constant model saves time, money and energy while producing safe, endless hot water for whole home!
- 【High Thermal Efficiency & High-Rise Wind Resistance】Phosphorus deoxidized copper heat exchanger with high temperature and corrosion resistance technology for full combustion and high thermal efficiency up to 92% . It can resist grade 8 wind speed and 240Pa high anti-wind pressure. Additionally, a wind pressure sensor is added to perceive the external wind force in real time and automatically adjust the fan, flame and maintain stable combustion.
- 【Advanced Safety Features】 CSA certified balanced combustion design required air combustion from the outdoor and the combustion city produced by the smoke forced out of the outdoor to ensure fresh indoor air, safe and reliable use. Features CO multiple protection ensures safety, equipped with PCB start up self-test &real-time intelligent monitoring, timely warning of potential gas fire and hydro power to ensure your family's safety. Automatically activates on water pressure between 7.0-150 PSI.
- 【Considerate Customer Service】 Here at Camplux, customer service is everything! We offer 24 shift hours customer service make the customer experience easy and fast through our live chat, phone support & our online helpdesk. Have a question? Give us a call at (844) 538-7475.
User questions & answers
Question: | what is minimum water flow for activation |
Answer: | Absolutely. You can fix it too! |
Question: | Why show 40kw on 120 volt ?. This is NG unit why 40 kw |
Answer: | Gently twist clockwise and anti clockwise (1/4 of an inch) and pull the pump upwards - this will then allow you to remove the sponge filter to clean. If you need to clean the pump at this stage just unscrew the visable screw to enable separation and clean. |
Question: | Has anyone successfully installed this at 4800ft elevation |
Answer: | This pump does not come with batteries. It takes 4 "D" cells. It may work fine with rechargeable batteries but I have only used alkaline batteries in mine. |
Question: | What are the connection sizes for the water and gas, and does it come with any adapters |
Answer: | Yes, I think it would. As you can see in the picture there are 3 different sized nozzles, so I'm sure you could fit the end of a balloon on one of them, and leave yourself some room after blowing up to tie it off. |
Product features
Features-
- The Camplux CA528 produces comfortable instant endless hot water for residential whole families use!
- Features PCB frequency conversion intelligent control, temperature intelligent adjustment ensures comfortable constant hot water.
- Features CO multiple protection ensures safety, equipped with PCB start up self-test &real-time intelligent monitoring, timely warning of potential gas fire and hydro power to ensure your family's safety.
- Automatically activates on water pressure between 7.0-150 PSI, maximum power output 150,000Btu/Hr. Hot water output 5.28 gallons per minute, perfect for a hot shower for whole home!
- The Camplux tankless gas water heaters are not recommened to use for elavation above 2000 feet / 600 meters.
Camplux 5.28 GPM Residential Tankless Water Heater
- Powered by 120 VAC voltage, features imported PCB with precise temperature control.
- Safe electronic ignition system,anti-freezing protection,flame failure device and dry combustion protection.
- Automatically activates on water pressure between 7.0-150 PSI.
- CSA certified balanced combustion design required air combustion.
- True 1/2 inch NPT water fittings,φ3" vent pipe is not included.
- PCB frequency conversion intelligent control ensures smart& energy saving.
Enjoying Comfortable Constant Hot Shower with Camplux 5.28 GPM Tankless Water Heater
The 5.28 GPM Camplux residential tankless water heater supplys on-demand comfortable constant hot water for residential whole home use. It is powered by 120 VAC voltage, has an imported PCB, precise temperature control, double adjustment of water and air, and rising of the third gear making it perfect for constance hot shower at home! The ideal operating range for the 5.28 GPM Camplux residential tankless water heater is 7.0-150 PSI. Camplux tankless water heater focus on phosphorus deoxidized copper heat exchanger with high temperature and corrosion resistance technology and advanced multiple protection systems to ensure your safety.
Prefect for Cabins!
Perfect for Tiny Homes!
Perfect for Apartments!
Perfect for Businesses!
- On-Demand Tankless Water Heater-Camplux advanced 5.28 GPM high efficiency flow control propane gas tankless water heater delivers 5.28 gallons per minute of on-demand endless hot water to suit medium- and smaller-sized homes. Automatically activates on water pressure between 7.0-150 PSI.
- Constant & Sustainable Hot Water Solution - CSA certified balanced combustion design,features with over-high wind pressure safety protection,Ipx4 water resistant protection, over-loaded electric protection,fan failure protection, equipped with PCB start up self-test & real-time intelligent monitoring, timely warning of potential gas fire and hydro power to ensure your family's safety.
- Affordable & Efficient Savings - PCB frequency conversion intelligent control, temperature intelligent adjustment, environmental protection and durability, truly outstanding energy saving. Man-machine dialogue, heating without waiting. This residential constant model saves time, money and energy while producing safe, endless hot water for whole home at an affordable rate.
- High Thermal Efficiency & High-Rise Wind Resistance-Phosphorus deoxidized copper heat exchanger with high temperature and corrosion resistance technology for full combustion and high thermal efficiency up to 92% . It can resist grade 8 wind speed and 240Pa high anti-wind pressure. Additionally, a wind pressure sensor is added to perceive the external wind force in real time and automatically adjust the fan, flame and maintain stable combustion.
- Considerate Customer Service -Here at Camplux, customer service is everything! We offer 24 shift hours customer service make the customer experience easy and fast through our live chat, phone support & our online helpdesk. Have a question? Give us a call at (844) 538-7475.
User questions & answers
Question: | Can this be mounted in an attic |
Answer: | Interior diameter 13 inches, height is about 19 inches with the lid off. .. With the lid on subtract 1.5 inches |
Question: | What is the btu of this unit |
Answer: | I don't know the actual size but. It can be converted with 1/2" bulkhead without any modifications |
Question: | How many amps of current does this unit pull from the power plug |
Answer: | The solar panels are very high quality,unlike other solar fountain used the low-quality epoxy panel, this product use high-quality solar laminates that won't break, deform, delamination, and last Longer. |
Question: | does it need filters |
Answer: | Yes, the start-up time will not exceed 10 seconds. |
Product features
Features-
- The Camplux WA528 produces comfortable instant & constant endless hot water for residential whole families use!
- Features PCB frequency conversion intelligent control, temperature intelligent adjustment ensures comfortable constant hot water.
- Features CO multiple protection ensures safety, equipped with PCB start up self-test &real-time intelligent monitoring, timely warning of potential gas fire and hydro power to ensure your family's safety.
- Automatically activates on water pressure between 7.0-150 PSI, maximum power output 150,000Btu/Hr. Hot water output 5.28 gallons per minute, perfect for a hot shower for whole home!
- The Camplux tankless gas water heaters are not recommened to use for elavation above 2000 feet / 600 meters.
Camplux 5.28 GPM Residential Tankless Water Heater
- Powered by 120 VAC voltage, features imported PCB with precise temperature control.
- Safe electronic ignition system,anti-freezing protection,flame failure device and dry combustion protection.
- Automatically activates on water pressure between 7.0-150 PSI.
- CSA certified balanced combustion design required air combustion.
- PCB frequency conversion intelligent control ensures smart& energy saving.
Enjoying Comfortable Constant Hot Shower with Camplux 5.28 GPM Tankless Water Heater
The 5.28 GPM Camplux residential tankless water heater supplys on-demand comfortable constant hot water for residential whole home use. It is powered by 120 VAC voltage, has an imported PCB, precise temperature control, double adjustment of water and air, and rising of the third gear making it perfect for constance hot shower at home! The ideal operating range for the 5.28 GPM Camplux residential tankless water heater is 7.0-150 PSI. Camplux tankless water heater focus on phosphorus deoxidized copper heat exchanger with high temperature and corrosion resistance technology and advanced multiple protection systems to ensure your safety.
Compact & Wall Mounted Design
Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.Save valuable space for attic small suite, your hot water heater doesn't have to be a behemoth!
Constant & Sustainable Hot Water
Balanced combustion design,features with over-high wind pressure safety protection,Ipx4 water resistant protection, over-loaded electric protection,fan failure protection.
Affordable & Efficient Savings
PCB frequency conversion intelligent control, temperature intelligent adjustment.This residential constant model saves time, money and energy while producing safe, endless hot water for whole home at an affordable rate.
Product description
MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it's perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.
- Provide endless hot water on demand and only as needed
- Save up to 60% on electricity bills for water heating
- Compact design saves space and is easy to install almost anywhere
- No electrical connection is required so it's perfect alternative for those homes experiencing frequent power outages
- Unlimited hot water whenever is needed
- 5-year
- Allows water temperature to be controlled
User questions & answers
Question: | What size box does it ship in |
Answer: | Hello. The 10L ships in a box that measures approximately 16 x 28 x 10 inches. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo |
Question: | For gas heater what is the outside dimensions, high , wigth , depth. Is it 23.6x13.6x6.9 with the extaust cap on top. Thanks, Ray |
Answer: | Hi Ray. The dimensions you gave are for the body of the heater only, not including the exhaust cap, since it is removable, and not including the water and gas connections at the bottom.Kind Regards,RossGadgetsGo |
Question: | Does it need to be vented |
Answer: | yes i have one in an outdoor shower and the other inside a bathhouse and we put a 90 degree turn on it to go out the side of the wall and works just perfect. |
Question: | Does this come with exhaust/vent pipes |
Answer: | Greetings, The Marey Gas 10L Tankless heater does not come with the Exhaust/Vent pipes. You will need to locate B-vent or Z-Vent Pipe material size pipe 4" online. |
Product features
Marey 10L Gas Tankless Water Heater
This compact model saves space and allows easy installation just about anywhere. It heats unlimited volume of water as needed and permits you to regulate the water flow and gas flow to better temperature. So if you instant and on demand want hot water, this is the product for you!
It is also a perfect alternative for those homes experiencing frequent power outages since this heater does not require electricity. The 10L unit provides up to 3.1 Gallons Per Minute, to provide hot water for your home family at multiple points of use!
Easy to install!
Multiple Points of Use!
Enjoy many features! Check temperature map below for more information on simultaneous points of use on your region.
Save Energy!
It can last a lifetime, keeping 87% efficiency level!
We are in the market since 1955!
GA10LP
Avaliable in Propane Gas.
GA10NG
...or also Avaliable in Natural Gas! Make sure you select your preferred gas type before you purchase your model.
Latest Reviews
View all
Nimh C Batteries
- Updated: 24.06.2023
- Read reviews

High End Road Bikes
- Updated: 08.02.2023
- Read reviews

Trx Equipment
- Updated: 09.06.2023
- Read reviews

Amd All In One Pcs
- Updated: 22.05.2023
- Read reviews

Ipad Bag For Kids
- Updated: 08.06.2023
- Read reviews