12 best instant on water heaters
Instant on water heaters, also known as tankless water heaters or on-demand water heaters, are a popular choice for providing hot water in residential and commercial buildings.Unlike traditional tank-style water heaters, which store and constantly heat a large amount of water, tankless water heaters heat water only when it's needed. Here are some key points about instant on water heaters:
On-Demand Heating: Instant on water heaters work by heating water as it passes through the unit. When you turn on a hot water tap, cold water flows through the unit, where either electric heating elements or a gas burner heats the water on the spot. This ensures that you have a constant supply of hot water whenever you need it.
Energy Efficiency: One of the primary advantages of tankless water heaters is their energy efficiency. They don't constantly heat and store water, which can result in standby heat loss seen in traditional tank-style heaters. Tankless units are typically more energy-efficient, potentially leading to lower utility bills.
Endless Hot Water: Since tankless water heaters heat water on demand, they can provide a continuous supply of hot water. This is in contrast to tank-style water heaters, which can run out of hot water if used excessively.
Space-Saving Design: Tankless water heaters are typically smaller and more compact than traditional tank-style units. They can be mounted on a wall, saving valuable floor space.
Variety of Fuel Sources: Tankless water heaters are available in both electric and gas (natural gas or propane) models, allowing homeowners to choose the option that best suits their energy source and needs.
Longevity: Tankless water heaters often have a longer lifespan than traditional tank-style heaters. They can last up to 20 years or more with proper maintenance.
Installation Considerations: Installing a tankless water heater may require adjustments to your home's electrical or gas supply, and it's essential to have it done by a qualified professional to ensure safety and proper functioning.
Flow Rate: The flow rate of a tankless water heater determines how much hot water it can deliver at a time. It's essential to choose a unit with an adequate flow rate to meet your household's hot water demands.
Maintenance: Periodic maintenance, such as flushing the unit to remove mineral deposits, is necessary to keep a tankless water heater operating efficiently.
Cost: Tankless water heaters generally have a higher upfront cost compared to traditional tank-style heaters, but their energy efficiency and long-term savings can offset this initial expense.
In summary, instant on water heaters provide hot water on demand, are energy-efficient, space-saving, and offer a continuous supply of hot water. They are available in electric and gas models and require professional installation and maintenance to ensure optimal performance and longevity.
Below you can find our editor's choice of the best instant on water heaters on the marketProduct description
Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.
Manufacturer Contact Information
800-283-3787
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water
User questions & answers
Question: | Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual |
Answer: | The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor. |
Question: | would this be able to supply a shower |
Answer: | A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..) |
Question: | Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank |
Answer: | If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring. |
Question: | When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes |
Answer: | When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible. |
Product features
Bosch ThermoTechnology
The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!
Water Where You Need It
Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).
Quality for Long-Life
Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.
Great for Small Spaces
Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.
Minimize Wait Time for Hot Water
Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.
Product description
FEATURES -
◆ Saves Energy and Money
The Thermoflow Elex 3.5 electric tankless water heater is adopt to advanced technology of Germany. Changing to this Elex 3.5 means there are no standby losses. No need to preheat before using, hot water will come out from the heater instantly after you turn on the water heater, you only need to stop it immediately after using, no waste of water or electricity.
◆ Unlimited Hot Water
Instant hot water thanks to rapid and maintenance-free bare wire heating systems. Because a Thermoflow heats water only when it is used, and for as long as it is needed, there is an endless supply of hot water. Nobody runs out of hot water .
◆ Space Saving
A Thermoflow Elex 3.5 tankless water heater completely replaces a conventional tank heater, yet takes up considerably less space, saving valuable living space and providing endless hot water on demand.
◆ Two Options for Applications
The Elex 3.5 model can be used for two different applications: Act as primary heater, just connect the inlet with cold water directly, and connect the outlet with mix tap; Act as booster heater, just connect the inlet with the outlet of storage tank, and connect the outlet with mix tap, more fast heating, higher flow rate, saving your time.
USING TIPS -
- The device must be filled with water before connection to the electrical supply!
- Make sure the min pressure of your water supply system reaches 15PSI.
- Please read the instruction manual carefully before you install or using the water heater!
PACKAGE INCLUDES -
1X Thermoflow 3.5kW electric tankless water heater
1X plastic bracket
1X bag of installation accessories (2 gaskets, 2 anchors, 2 screws)
1X instruction manual
Inquiry & aftersales service: [email protected]
Hotline:+1(844)334-4203
- ➤ [UPGRADED] MUST HARDWIRED small Tankless water heater for single sink wash use only - Save up to 60% on your water heating cost with an Thermoflow electric tankless water heater. Avoid distribution, start-up and technical systems losses as well as circulation and storage losses.
- ➤ ENDLESS INSTANT HOT WATER - No need to preheat before using. As soon as you open the tap, the water flows out with your desired temperature. High efficient,saving energy.
- ➤ COMPACT DESIGN - Super compact designed, even smaller than a shoe box. Wall-mounted design for installation at the point of use, frees up floor space for more storage, easy to install into washbasin cabinet and other tight spaces!
- ➤ EXCEPTIONALITY DURABLE - Instant hot water thanks to rapid and maintenance-free bare wire heating systems. High quality alloy bare heating element has good corrode resistance and acid-resisting performance, with longer lifespan, instantaneous heating efficiency up to 99%.
- ➤ NOTES - Please verify that this model is the right size for your hot water needs and electrical requirements before purchase & installation. Dimensions: 7.4" x 5.4" x 3.4"; Weight: 3lbs; Pipes fittings: 1/2”NPT, Electrical requirements: 3.5kW at 208 volts or 4.7kW at 240 volts, Nominal pressure: 150PSI. Nominal current: 25A. Required breakers: 1x 2-POLE 25A. Required wire: 1 x 12AWG . ( Breakers and wire are NOT included )
Product features
Thermoflow Elex3.5 Electric Tankless Water Heater
Saves Energy & Money - Adopts to advanced technology of Germany. Changing to this Elex 3.5 means no standby losses. No need to preheat before using, no waste for water or electricity.
Endless Hot Water - Instant hot water thanks to rapid and maintenance-free bare wire heating systems. For as long as it is needed, there is an endless supply of hot water.
Easy Installation - Very compact designed, saving valuable living space and providing endless hot water on demand.
Electric Point of Use Tankless Water Heaters
thermoflow Elex 3.5 electric tankless water heater is a true Point of Use Model because it is specifically designed for over or under the sink, multiple applications and the temperature rise 45°F at 0.5GPM. At 72°F inlet temperature the Elex 3.5 can heat 0.72 gallon per minute to 120°F. It can also heat one hand sink emitting 0.5 gpm to 105°F with inlet temperature as low as 57°F. Its compact size allows for over or under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Bathroom Sinks. When sized properly this water heater will provide endless hot water.
Instantly Hot Water
As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it. Due to short water lines and modern technology.
Saving Energy
No more long water lines and circulation losses because the units are installed directly at the point of use. The water is no longer preheated and stored in large amounts.That saves energy. And it saves investment costs: Long water lines, circulation pumps and hot water tanks are no longer necessary.
More Hygiene
Electric instant water heaters heat up the cold water to the perfect temperature within seconds, directly at the tap, as it flows through the unit. The heated water is used immediately and unused water is avoided in the water line systems. That’s why testing for Legionella bacteria becomes unnecessary. This is what makes de-centralised water heating more hygienic and efficient.
Great for Small Spaces
Water heaters are compact and lightweight and can be undersink or oversink installed - features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.
- 【INSTANT & SUFFICIENT HOT WATER】 Applied with 9kW heating system, the electric water heater ECO90 supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheating nor temp fluctuations in use, perfect companion for sink and faucet.
- 【SMART SELF Modulation】The hot water heater ECO90 adjusts power input according to flow rate and temp setting in real time, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 99.8% saves considerable electric charge.
- 【UPGRADED HEATING ELEMENT】The ECO90 hot water heater is applied with micro-computer control and patent heating technology. Water pipe is completely separated from electricity by cast aluminum module, which also guaranttes no"cold water sandwich" and avoids any corrosion inside pipes so as to extend service life.
- 【SAFE AND DURABLE】Applied with multiple protection devices, every unit goes through strict tests to ensure 100% safety. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
- 【CONVENIENT USE】The ECO90 tankless water heater comes with digital display & touch control panel so temp setting is easy job. It's space saving, measuring: 15.8″ H x 11.1″ W x 3.1″ D. Plus it has a stylish, modern design that blends in any location. Please verify it is the right size for you: 9kW@240V (not 110V); pipes fittings : 1/2" NPT.
User questions & answers
Question: | Is a pressure relief valve needed for the electric tankless water heater |
Answer: | Of course there is a switch |
Question: | is the tankless water heater electric suitable for a shower without hot water feeding in |
Answer: | Chances are there is a check valve and the lines are connected backwards if pressure is not making it to your sink. Make sure you connected the line into the heater on the right side where the blue cap was. The line out comes out the left where the red cap was on the heater. Do expect some reduction in pressure, but it should not be excessive. |
Question: | Will this unit work in a 15 gallon closed loop recirculating system that needs to stay at a constant 100 degrees +/-3 degrees |
Answer: | Yes you can connect this unit to the hot water supply line from your existing hot water heater and have hot water delivered to your kitchen sink. This unit will reheat the hot/warm water to the desired temperature. This should ensure you have continued hot water. |
Question: | will the electric water heater tankless work under low temp condition |
Answer: | If you take a Navy shower, as in turn on water rinse, off while washing self, turn water on to rinse. Would need to be a short shower overall but it could work. |
Product features
INNOVATION, OPTIMIZATION, ENERGY-SAVING
With rich experience of 20 years in appliances industry, ECOTOUCH appliances is associated with advanced technology, quality craftsmanship, reliability and attractive features design, which offers brand new life style of being easy, efficient and enthusiastic. We are decicated to innovate and offer user-friendly & energy saving appliances that base on extensive consumer research and follow stringent quality stanards, meeting your requirements at the very best value for your budget.
We offer 1 year QA for the unit and you don't have to worry about any quality issue, the unit is premium quality and we have full confidence on it. If anything unexpected occurs, we get technicians to figure out the issue and offer you the best solution.
Electric Tankles Water Heater for Your Dear Family
Being one of those limited choices with smart modulation heating, ECOTOUCH ECO90 tankless water heater provides instant & endless hot water with optimal thermal efficiency of 99.8% and minimum energy cost, thus, the tankless water heater heats up 1.5GPM water from 67℉ to 106℉ and will sure cut your electric bill.
Designed with sturdy structure, it is a perfect solution for kitchen & bathroom sinks, dishwasher and washing machine and you could use it for shower purpose in southern area.
Instant hot water and endless
As soon as you turn it on, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheat or standby energy loss. The best part is you get endless hot water now, 24h service, anytime you need.
Smart modulation and energy saving
Equipped with a smart modulating control for stable temp, the hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Optimal energy efficiency is promised.
Easy to installation
Wall-mounted design frees up floor space for more storage, easy installation in bathrooms, kitchens. Totally silent operation and no venting is required. It is also ideal for apartments as well as a wide range of business and industrial applications.. you don't to have to hire a plumber even if you can do it.
Product description
Product Information
The Camplux tankless water heater TE04 applied 3.5kW heating system, the electric water heater offer you instant, endless and consistent temperature hot water in 24 hours of 7 days. This electric water heater with compact size and sleek design, can be mounted in any angle, perfect for kitchen, wet bars, school, bathroom sinks, hospital, hair salon and boats. The on demand electric water heater will only draw the amount of electricity required to produce the hot water, no need pre-heating to save energy. 5 protections ensure your family safety. The tankless electric water heater designed with leakage proof and over-heat protection start, when the temperature reach to 149°F.
Kindly note:
This product is recommended for use with a single sink only. Do not use with a shower or multiple fixtures.
Product Specification
Power: 3.5kW
Voltage: 120V
Min. water flow : 0.4GMP
Min. wire size: 10AWG
Required circuit breaker : 1x 40 AMP
Water pipes fitting: 1/2" NPT male
Dimension (in):
Product size(WxDxH):6.0x4.8x3.0in
Packing size(WxDxW): 9.1x5.2x9.1in
Packing list:
1 x 3.5kW Tankless electric water heater
1 Set of fixing kits
1 x Instruction manual in English & France
- Smart&Considered Design: Small water heater designed with smart touch control & LED display, mini size, perfect for under sink installation. The minimum water flow for activation just need 0.4 GPM (Only for one sink)
- Multi-angled Mounting: The compact size instant electric water heater requires a connection of 1* 40A circuit breaker & 10 AWG wire. Install close to outlet for energy saving. Can be mounted Multi-angled, ideal for kitchen, wet bars, school, hospital, hair salon and boats. Please make sure it is the right size for you: 3.5kW at 120V, product dimensions 7.8" x 6.3" x 3.9", water pipes fitting: 1/2" NPT male
- Reliable&Durble: The 3.5kW tankless water heater comes with 5 protections. NFS approved, offer lead-free water. ETL safety certified, leakage and overheat protection device to ensure your safety. Stainless steel and copper component for high efficiency and durability
- Consistent Hot Water -On demand water heater only heats the water when you need it and no waiting for preheat.The temperature rise of 1.0 GPM is 55°F. Easy to get hot water between 85°F - 131°F in seconds. Enjoy instant and endless hot water
- Rotatable LED Display: 120V tankless water heater features an upgrade rotatable digital temperature display and touch control panel, show you the easy reading output water temperature at real-time and setting ideal temperature just by finger
User questions & answers
Question: | Is this a big enough for a shower |
Answer: | Yes it is and it will adequately work I eat a small little swimming pool 4 by 10 by 3 keeps in perfect temperature |
Question: | What is the screw like hole thing on the back next to the hot water side |
Answer: | It's for the external flow control switch the switch that turns it on only when it detects water flow or demand |
Question: | How long can this run for |
Answer: | Continuously until you run out of water. |
Question: | Se puede regular la temperatura ? Es decir se puede poner ms caliente un dia y otro dia menos caliente |
Answer: | Si. Puede personalizar su temperatura favorita. |
Product features
FEATURES
The Camplux tankless water heater TE04 applied 3.5kW heating system, the electric water heater offers you instant, endless and consistent temperature hot water in 24 hours of 7 days.
This electric water heater with compact size and sleek design, can be mounted in any angle, perfect for kitchen, school, bathroom, hospital and hair salon sinks.
The on demand electric water heater will only draw the amount of electricity required to produce the hot water, no need pre-heating to save energy and heat up in seconds. Multiple protection to ensure your safety.
The tankless instant water heater is leakage proof and over-heat protection will start when the temperature reach to 131°F. Smart control, remember your favorite temperature and convertible freely for Fahrenheit and Celsius.
Specification:
Voltage: 120V
Power: 3.5kW
Required circuit breaker : 1x 40 AMP
Water pipes fitting: 1/2" NPT male
Max. Inlet Pressure: 145psi
Dimension (in):
Product size (WxDxH):6.0x4.8x3.0in
Kindly note: This is an electric unit that requires professional licensed technician to install per city/state safety code.
Bullet Points of Camplux Electric Tankless Water Heater
- INSTANT ENDLESS HOT WATER - No need pre-heating and get hot water in seconds.
- EASY TO ADJUST - Move your finger, easily get hot water between 85°F - 131°F.
- SAFE DURABLE & LONGEVITY - Offer you lead-free water quality, excellent performance and safety.
- ROTATABLE LED DISPLAY - LED display would reverse when you mount up side down, perfect for under sink installation.
- COMPACT SIZE - For indoor installation with compact and space saving design.
EASY TO ADJUST
Move your finger, easily get hot water between 85°F - 131°F.
Upgrade Rotatable Digital
Very convenient even install under sink. (For one sink only)
Standard 1/2 NPT Fitting
Supplies instant, consistent and endless hot water.
Flexible Installation
Stylish, modern design that blends in any location.
Kitchen
Bathroom
Office
Product description
Color:BIS03-White (no remote control)
FEATURES
Mini-Tank Water Heater comes with 1.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.
ENERGY SAVING
This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 95% energy saving with help of its smart self adjustment technology.
HEALTHY WATER QUALITY
MULTIPLE SAFETY PROTECTIONS
Over temperature protection
Dry heating protection
Leakage protection
Water and electricity line separated
EASY INSTALLATION
Real compact design, water heater cooridates with scenes decor, under sink water heater, Can be shelf, wall or floor mounted. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.
SPECIFICATIONS
Power: 1.5kW
Voltage: 120V~50Hz
Min. water flow to activate the unit: 0.475GMP
Maximum temperature 167°F
Max. Amperage: 15A
Recommended wire size: 10AWG
Required circuit breaker : 1x1-Pole 20 AMP
KINDLY NOTE
1.The equipment is mainly used for sinks.
2.Mini-tank water heater should be installed professionally.
3.Please read instruction manual carefully prior to installation and use!
- The label on the right of the product is to allow customers to use the product more energy-savingly. We will improve the language expression in the future. We are very sorry.
- 【NOTE】Fill the water first, then power on (otherwise it will damage the water heater).
- 【SAFE DURABLE & LONGEVITY】304 Made of stainless steel and never rust,Anti-leakage plug,Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant,This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
- 【SMART INVERTER FOR ENERGY SAVING】Digital Display,Automatic heat preservation and storage of hot water, 3.0 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%,Maximum temperature167℉,The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
- 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design,Easy to control warmth.Vent valve, Tee pipeline, pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
- 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time,8-15 minutes to heat to your desired temperature).
- 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 18.0''L x12.6''W x10.2''H; 8.86lbs; 1/2″NPT NPT. 1.5 kW, 110-120 volts. One-year warranty and 24H customer service support, feel free to contact us.
User questions & answers
Question: | Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink |
Answer: | Yes you can connect this unit to the hot water supply line from your existing hot water heater and have hot water delivered to your kitchen sink. This unit will reheat the hot/warm water to the desired temperature. This should ensure you have continued hot water. |
Question: | what is the lowest temperature this can be set at |
Answer: | 86℉ |
Question: | Brass tee provided does not seal on the hot water outlet, any tips |
Answer: | The brass 3 way T is not meant to connect to outlet nipple. It needs the 1/2 in compression connector provided with it. |
Question: | Can this be mounted laying down or does it have to be in a vertical position |
Answer: | It is vertical |
Product features
AGU 1.5Kw Mini-Tanks Water Heater Electric
Features
Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.
Endless Hot Water - Digital Display,Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.
Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted,easy to install.
Hot water on call
Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the AGUST: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the AGUST can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.
INSTANTLY HOT WATER
As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.
ENERGY EFFICIENT
It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.
KNOB ADJUSTMENT
Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet,Optimal energy efficiency is promised.
GREAT FOR SMALL SPACES
Water heaters are compact,It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.
Product description
The Ariston Andris 2.5 Gal. 6 Year Corded 120-Volt Point of Use Mini-Tank Electric Water Heater has a mini tank that eliminates the long trip through pipes that water usually has to take from the water heater to the sink. This powerful, yet compact water heaters purpose is to provide you with hot water, when and where you need it. Installation has never been easier, with a simple tap into a cold water line and a standard 120-Volt outlet.
- EASILY ACCESSIBLE HOT WATER: Compact designed 2.5 gallon mini tank. Provides instant hot water at point of use. 6 year limited warranty on tank, 2 year warranty on parts. Wall or floor mounted unit (wall brackets & rubber feet included).
- DO IT YOURSELF INSTALLATION: 1440-Watt heating element draws 12 Amps. 65-161°F temperature range. Easy installation thanks to a standard 120-Volt outlet.
- CAN FIT VIRTUALLY ANYWHERE: Dimensions (pipes included): 14.25"W x 14.25"H x 10.75"D; Water Connection: 1/2" NPT
- ELECTRICAL CONNECTION: Plug-in; Relief Valve: Factory Installed; Recommended Circuit Breaker Size: 15A
- QUALITY YOU CAN COUNT ON: TitanShield, exclusive technology that fully protects the tanks inner surface against corrosion. Robust environmentally safe foam insulation to increase energy efficiency. Eliminates the need for a recirculation line.
User questions & answers
Question: | Can this be mounted horizontal |
Answer: | How long does it take to heat the water when turned on? |
Question: | When we went to connect the water connector tube to the red ring hot water outlet it would not fit. There was a red tub in the outlet that prevented t |
Answer: | Yes, you are correct, one of the units I installed had the same issue with the red plastic fitting liner protruding, and it cannot be pushed in or removed. I solved the problem by filing the plastic down to just above the metal pipe. Make sure to keep it level and remove burrs. Another fix would be to use standard pipe fittings such as putting a street ell on the tank nipple then connecting your flex hose to that - use brass or stainless fittings and pipe dope. |
Question: | Has anyone used a t-valve to hook this to their toilet inlet line? I'd like to split the toilet line, install this, then attach my sprayer bidet |
Answer: | Yes you can, but you know, you can buy a bidet with a water on demand heater built in it ! much better and you are not reheating 2.5 gals of water after each use. Check on Amazon or Wish for a bidet, it is not expensive . |
Question: | Does it need its own breaker |
Answer: | Yes and no, it depends on where you are robbing the power from ,if it is from a circuit with very little use like bath wall outlets only ( like I did ) I would say no ,but if its from a circuit with heavy use, I would say yes, also what are you going to use the hot water for ? in my case, I use mine at the wash basin only so it is not heating continuously. . |
Product features
ANDRIS RS 2.5 GALLON ELECTRIC MINI TANK WATER HEATER
SINGLE FAUCET UNIT
- Remote locations
- Single water line
- Wall or floor mounted
- Eliminates the need for a recirculation line
- Easy Installation
BOOSTER UNIT
- Improve existing capacity
- No waiting time
- Load reduction
- Eliminates the need for a recirculation line
- Built-In redundancy
SINGLE FAUCET OR BOOSTER UNIT IN A WATER HEATING SYSTEM
This compact yet powerful hot water heater supplies instant hot water to even the most remote locations:
- Smaller/Second properties
- In-Law suites, Kitchenettes
- Sinks located far from water heater: Pool House/Garages
- Supplemental hot water for high-flow fixtures
- Commercial bathroom sinks
Product description
This Smart Technology electric tankless water heater is configured as a "whole home" model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with 40 amp double pole breaker connected to set of #8 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
- The product is highly durable
- The product is easy to use
- Manufactured in China
- Heating elements are durable and are threaded for easy replacement
- Activation Flow - 0.3 GPM
User questions & answers
Question: | Ecosmart 8, location central texas, home workshop to supply hot water for dog bath and sink. personel use, not a business, 2 big dogs. will this work |
Answer: | I have no problem with ice for smoothie. I blend all other ingredients (including about 8 oz liquids - milk and yogurt) then add ice cubes one at a a time. This is easy to do as the blades are at the bottom so ice cubes can be dropped in from the top. May need to press cubes down toward blades with a spoon. |
Question: | Product description says #10 wire, reviews all say #8, which is correct |
Answer: | As long as you rinse it right away or let it soak for a bit if you're on the go and have to leave right away, it's fine. I am actually impressed by how well stuff does not stick to the inside. What I've been doing is using a long dish washing brush to clean down by the blades and using a regular dishcloth for all the other areas including the rest of the inside. Easy to clean. Hold the little piece on the bottom while scrubbing the blades with the brush so the blades don't move from the brush. |
Question: | Could this be used to slowly heat a small above ground pool? Just wanting it warmer |
Answer: | The one I received this rubber seal pops out every time you open the lid and it has since day one... Can't even check to see if you're finished without having to stop and try to put the rubber seal back in place which takes a few minutes each and every time. |
Question: | will freezing weather damage it |
Answer: | Thanks for your question! Absolutely! The NutriBullet 600 watt unit is perfect for making shakes. We have many recipes here: https://www.nutribullet.com/recipes/. Enjoy your day! |
Product features
3 Smart Steps for Endless Hot Water
Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.
Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.
Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.
Product description
📢 What are the benefits of using thermomate propane gas tankless water heater?
✅ 1. Starts up with only 2.5 PSI of water pressure, and up to 110 PSI! It's ideal for RV' s, campers, rural cabins, small apartments, flats, hunting cabins, as well as boats, sailboats, and mobile homes.
✅ 2. 34,000 BTU/Hr maximum power output, you can get instant endless hot water easily wherever you are. Our customers also use them for washing stalls, horse trailers, de-icing cars in the winter, outdoor camping, motels, small roadside restaurants and other situations where endless and economical water heating is required and water pressure is available at 10PSI.
✅ 3. This amazing instant water heater is designed for one point of use at a time.It delivers over 1.32 gallons per minute of hot water with a 77°F rise in temperature. This means that if your tap water is at 59°F, it will instantly deliver 1.32 gallons per minute of hot water at 113°F.
✅ 4. With remarkable electric pulse ignition technology that requires NO STANDING PILOT. The outstanding thermomate gas water heater saves up to 25% in gas consumption when compared to older technology lighted pilot lighted units. Even if in case of a power outage or no power supply such as in RV'S, campsites, boats and sailboats, you can still enjoy your hot water at home, as it uses 2 "D" cell batteries to ignite the electronic spark module.
✅ 5. It's designed by modern fashionable line shape. Magnificent thin-shaped & portable appearance,you can take it anywhere to get instant hot water.
📖 Specifications
Max. Flow Rate: 1.32GPM
Related Gas Pressure: 0.4 PSI
Power Rating: 34,000 BTU/Hr
Activation Flow Rate: 0.44GPM
Water Pressure: 2.5 PSI ~ 110 PSI
Flue Type: LPG ( Liquid Propane Only )
Power Source: 2 "D" Cell Batteries ( Not Included )
Vent Pipe: No needed for outdoor use
- [2.5 PSI Water Pressure Startup] Equipped with a magnetic water flow sensor, allowing the unit to work at low water pressure, stable water flowing to meet a wide range of usage for those in water shortage areas, including rural areas, RV's and Boats.
- [Instant Hot Water On Demand] Rated at 1.32 GPM, this water heater provides endless hot water on demand and only as needed, no need to preheat making it more efficient and energy-saving, saving up to 50% on water heating costs.
- [Multi Safety Protection] Anti-freezing apparatus draining the stock water to avoid damage of freezing under cold areas to the machine itself or in case of a long time no use. Featuring overheating and flameout protection, the gas supply will shut off automatically under unexpectedly flame out or high water temperature over 185 °F.
- [Compact Exquisite Design] Compact and space-saving design with minimal noise output which is portable for outdoors. A great partner for camping and road trips bringing an amazing hot shower for you when you are camping, hiking, fishing, beaching, etc. Besides, you can also wash your pets with this tankless water heater, or provide hot water for the swimming pool.
- [Easy to Install] Equipped with 1/2" BSP water fittings and manual water temperature controls make it easy to install and use. Please verify it's the right size you need: net weight 10.4lb; size 13.4(L)x4.7(H)x11.6(W); maximum power output 34,000btu/hour (10kW). Work with a 0.4PSI gas regulator (not included).
User questions & answers
Question: | Can you mount this on the floor on its back |
Answer: | Thanks for your consultation, there is no vent for this unit, we suggest you to use it outside of the camper. Any problem please feel free to contact us. Thank you. |
Question: | Can this be installed inside the trailer close to a roof vent |
Answer: | The manufacturer's instructions say it is only to be used outside, and that it is not designed for a permanent installation. Having said that, mine is installed inside an RV under a window. We crack the window when we want hot water and I am fairly confident we are not putting ourselves in danger of carbon monoxide poisoning. We run it for short periods - a little hot water for washing dishes or short showers. If the intended uses involved running it for longer periods I would want to place a proper vent over it that went outside. In any case, be sure you are mounting it with suitable clearances from anything flammable above and to the sides. |
Question: | Is there a vent for this unit? I want to use it inside my camper |
Answer: | yes,, i believe it's a round disk type battery |
Question: | It say that its no need to vent it so can this be used indoors without any problems |
Answer: | It uses a CR2032. The case takes some work to get apart to replace the battery. You have to be careful not to break the tabs that hold top and bottom together. Once you have it open, the electronics will fall out if you're not careful. You can see instructions here: http://mopeka.com/homepage/instructions/ |
Product features
AZ132 Propane Tankless Water Heater
[ Low Water Pressure Startup ] Starts up with only 2.5 PSI of water pressure, holds up to 110 PSI, no need a pressurizer pump anymore. It works perfectly at low water pressure, stable water flowing under high pressure to meet the requirements of those in water shortage areas, especially those found in rural areas, RV's and Boats.
[ Tinning Copper Heat Exchanger ] Adopts a durable Tinning Copper Heat Exchanger, more high efficient energy saving, corrosion-resistant with a long lifespan.
Endless Hot Water On Demand
As a tankless solution with high-efficiency tankless gas water heaters that deliver a continuous supply of hot water, you save up to 50% on water heating costs. thermomate AZ132 uses only the energy necessary to heat water on demand. With thermomate you no longer pay to heat and maintain a tank of hot water.
Safety & Easy to Maintenance
The thermomate propane tankless water heater features a anti-freezing apparats, which can discharge the stock water to avoid damaging machine itself by freezing under cold areas or in case of long time no use. It does not require cumbersome and costly installation of flues and ductwork because it is outfitted with state of the art double ODS (Oxygen Depletion Safety shutoff device).
Get Hot Water Easily As Needed
Starts up with only 2.5 PSI of water pressure, and up to 110 PSI! It's ideal for RV' s, campers, rural cabins, small apartments, flats, hunting cabins, as well as boats, sailboats, and mobile homes. Make you and your family enjoy the comfort and convenience of continuous hot water whenever and wherever you want it.
Cost Effective & More Hygienic
The thermomate propane gas water heater adopts a durable Tinning Copper Heat Exchanger & stainless steel main burner, decreasing gas consumption and burning noise, more high efficient energy saving, more hygienic and healthier, corrosion-resistant with long lifespan.
Product description
Features
1.The Camplux CM264B is high efficiency with on-demand 2.64 GPM tankless water heater.
2.CM264B tankless water heater is designed for small to medium hot water production, it is perfect for indoor use, at a cottages, cabins and smaller homes.
3.Safe electronic ignition system, plugs into standard 120v electrical outlet with UL-listed cord.
4.The operating propane gas pressure is 0.4PSI with maximum power output 68,000btu/hour.
5.Applicable water pressure from 3.6~110.0 PSI, CM264B offers a 77-degree Fahrenheit temperature rise at 2.64 GPM.
6.Flameout cut off protection,air flow pressure switch protection and Over-heating protection.
7.CM264B can be used with 20-100 lb propane tank(tank and hoses not included), suitale with Camplux low pressure propane gas regulator (Model # KR-106A)
8.Installation Guide: 2" clearance from the wall,1.75" on both sides(left and right) from anything flammable,3' from any window, overhang, awning,18" from the ground.
Easy to Use
1. Install the tankless gas water heater on the wall.
2. Install the 2"stainless steel vent pipe.
3. Connect shower hose and shower head to the hot water outlet.
4. Connect water hose to the water inlet.
5. Connect gas pipe to the gas inlet.
6. Plug in the power cord.
7. Turn on water tap and enjoy instant hot water!.
What's in the Box
1 x brand new CM264B tankless water heater
1 x Gas inlet connectors 1/2" BSP Female x 5/8" UNF inverted flare male
1 x 2" stainless steel vent pipe
1 x accessories package(included water tape & fixing screws )
1 x instruction manual
Inquiry & customer service: [email protected]
Service hotline: 1-844-538-7475
- Compact Design,Saving Energy-The compact size - 12.8"(L)*5.91"(W)*20.28"(H) tankless water heater saves more space than traditional tanks.Trendy and modern design with fahrenheit digital temperature display.Eco and Full gas switch for energy saving and get ideal hot water temperature.
- On-Demand Tankless Water Heater-Camplux high efficiency 2.64 GPM propane gas tankless water heater delivers 2.64 gallons per minute of on-demand endless hot water ensures instant hot water for any small homes, cabins or apartments.
- [More Safety] Flame-out protection, anti-freezing protection(manual drainage needed),over-heating protection, air flow pressure switch protection to ensure the safety. Safe electronic ignition system, plugs into standard 120V electrical outlet with UL-listed cord.
- Convenient, Easy Installation -Uses standard 1/2" NPT water fittings and comes with 2 inch horizontal venting pipe allowing for convenient and quick installation and ensures efficient power ventilation .
- Considerate Customer Service- Here at Camplux, customer service is everything! We offer 24 shift hours customer service make the customer experience easy and fast through our live chat, phone support & our online helpdesk. Have a question? Give us a call at (844) 538-7475.
User questions & answers
Question: | Can the natural gas unit work in high altitudes like colorado springs pueblo,co |
Answer: | Hello there,thanks for your inquiry,this model in black color only available with propane gas now,you need to take the white color if you want the natural gas.It's can work in colorado.Any further questions please feel free to email us [email protected] or call us at (844) 538-7475. |
Question: | Can you use this tankless water heater for a boiler setup on a house |
Answer: | Maybe for a small apartment but I don't think for a house. |
Question: | What is minimum water flow for burner to ignite |
Answer: | Hi,Camplux 10 Litre tankless water heater requires for a water flow of 3.6 PSI for burner to ignite,the ideal opertating water flow range is from 30-80 PSI. |
Question: | Can this product be installed on it's side |
Answer: | No |
Product features
Features-
- Camplux CM264B tankless water heater is designed for small to medium hot water production, it is perfect for indoor use, apartment, cabins and smaller homes.
- The 120 volt power cord powers the internal exhaust fan and color screen, safe electronic ignition system.
- The operating propane gas pressure is 0.4 PSI with maximum power output 68,000btu/hour.
- Applicable water pressure from 3.6~110.0 PSI, the CM264 offers a 77-degree Fahrenheit temperature rise at 2.64 GPM.
- Camplux water heater is with innovative combustion technology and advanced multiple protection systems to ensure your safety.
- Air flow pressure switch protection, flame out cut off protection. Over-heating protection,anti-freezing protection.
- CM264 can be used with 20-100 lb propane tank(tank and gas regulator were not included) but you can take Camplux low pressure propane gas regulator model KR-106A.
- The gas water heater can't be used for drinking water.
- Any flammable items around the appliance must keep a distance to prevent fire accident.
- The camplux tankless propane water heater line was not recommend for elevation above 2000 ft.
Bullet Points of Camplux 2.64 GPM Tankless Gas Water Heater
- Eco/Full switch function saving energy,features with exclusive color screen design!
- Dry combustion protection, flame failure device, anti-freezing protection.
- Gas inlet connector 5/8" UNF inverted flare male, true 1/2" NPT water fitting.
- For indoor installation with compact and space saving design.
- Including horizontal stainless steel vent pipe, ready to install.
Enjoying Endless Hot Water with Camplux 2.64 GPM Tankless Gas Water Heater
The Camplux 2.64 GPM tankless gas water heater supplying instant hot water,ideal for apartment,small homes and cabins. You can get comfortable shower by adjusting the water termperature through summer/winter switch.Easy read LED temperature display shows output water temperature.Camplux water heater with innovative combustion technology and advanced multiple protection systems to ensure your safety.
Save Energy,Digital Temperature Control
Dry combustion protection, flame failure device, anti-freezing protection. Save energy,digital temperature control high thermal efficiency at 88.5 %.
Advanced Ventilation Indoor Installation
Gas inlet connector 5/8" UNF inverted flare male, true 1/2" BSP water fitting. Ready for indoor installation with safe, efficient power ventilation.
Comes with Approved Adapters
Comes with approved adapters. Camplux water heater is with innovative combustion technology and advanced multiple protection systems to ensure your safety.
Product description
Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications
- External adjustable digital thermostatic control with LED display (+/1 degree accuracy
- Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
- Simple installation – 1/2 NPT adapters included; side 1/2 inch Compression water connections
- 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
- Threaded for easy replacement, simple installation, digital temperature display 54 A. 13kW Model Flow Rate: up to 3.17 GPM
- 54 A
User questions & answers
Question: | We have a 500sq' apt. 1 kitchen sink, 1 lav sink and tub/shower. This tankless heats water to both sinks but nothing to the tub/sh. Help |
Answer: | Sinks have aerators to slow down the water where a tub doesn't. It sounds like one possibility is that your exceeding the GPM for this heater. Next possibility, double check an measure your actually getting at least 240v at the heater, I had an issue where my unit was only getting 235v an it was causing a similar issue where only one of the two heating elements was activating. I had it set to 125F but it was coming out 100F. It was warm and without a meter I would of thought it was working correctly until I tried filling a tub. It couldn't even get the water warm. I pulled my wires out an restripped an cut an screwed them in an it fixed my problem, now its measuring around 245v. Make sure there is no copper showing after screwing down your input wires. Now filling the tub I noticed after about 10-15 seconds the water gets too hot to touch. I set it to 135F. |
Question: | Do these tankless water heaters require an overflow line to the outside of the home or a pan like is required on normal water heaters |
Answer: | No tank, so, no overflow line required. It mounts on the wall. A pan is needed if required by building code in your city. |
Question: | what are the wiring and power requirements |
Answer: | good morning,60 amp breaker and , number 6 cable !thank you have a great day! |
Question: | How many amps are needed for rheem rtex - 13 240v heating tankless electric water heater |
Answer: | Hello-The RTEX-13 requires 1x 60A@240V breaker / 6 AWG recommended wire size.Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=Specification-Sheet&id=fc3235b7-7cd0-42cd-93bc-7169ea92be31 Rheem 800-432-8373I hope this helped :)Ben |
Product features
About Us
Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925. While the company has produced a number of products in its nearly 100 years of operation, Rheem is currently the manufacturer that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is one of the largest manufacturer of water heating products in North America.
- 🚿【TIPS】Please notice that the 18KW tankless water heater requires 2 x 40 AMP breakers and 2 x 8 AWG wire, the Min. Water Flow is 0.4GPM/1.5L/min. The 24KW tankless water heater requires 3 x 40 AMP breakers and 3 x 8 AWG wire, and the Min. Water Flow is 0.66GPM/2.5L/min.
- 🚿【Save Money Save Cost】No need to preheat before using instant tankless water heater. After using our Rinkmo high efficient water heater, you will find your water Heating Costs Reduce Up to 60%, due to our heater is 99.8% Energy Efficient, you can get hot water within 3s; Create heat without direct contact with metals,No mineral buildup so you don't need to maintenance or fix it and replace the heater coils, No expensive maintenanc cost in the future.
- 🚿【Stable Water Temp for Whole House 】Our smart modulating technology and formula to calculate the difference between the desired temp and current temp, adjusts power input based on flow rate and temp setting in real time by our temp sensors and flow sensors. No sudden temp changes.
- 🚿【Stable Water Temp for Whole House】Our smart modulating technology and formula to calculate the difference between the desired temp and current temp, adjusts power input based on flow rate and temp setting in real time by our temp sensors and flow sensors. No sudden temp changes.
- 🚿【Compact Size Save Space】Rinkmo water heater only like a small suitcase, save your space and giving more to your living area. Easy to install and operation, set temp by turning the button, press the button to switch between Fahrenheit/ Celsius.
Product features
Rinkmo Electric Tankless Water Heaters Help You
Rinkmo has developed a new line of more efficient electric tankless water heaters within 3 years, which with improved design and state of the art technology.
It is a new generation of instant and efficient electric tankless water heaters, safe, efficient and cost effectiveness never before obtainable. Radically solve the problems.
You can install it anywhere hot water is needed.
Rinkmo always cares what consumers care about.
No Worry
Approved.
No above bad things happened under Rinkmo, you can enjoy your life without this terrible things even you have hard water.
Endless Hot Water
Not worry about the hot water even you have a long shower time.
No need to preheat, 3s you can get the hot water you want, no annoying delay and cold water.
Just turn on the tap or shower.
It can run both of our showers and dishwasher/washing machine without issue, up to 3 x faucet, 2 x shower at the same time.
Well suited also good for homes in the Northern U.S. and Canada or in the southern U.S. that have large Roman-style or Jacuzzi tubs that have generally more demanding water usage needs.
Get Comfortable Experience
Rinkmo use high quality temperature sensors and smart flow sensors, it is very important for our using experience.
So you can still get stable temperature water instead of scalding hot water, when you reduce flow rate or low water pressure.
The water temperature will not fluctuates anymore when you take shower and bathe baby.
-Auto protection: when it is detected that the outlet temp reaches 167 ° F (75 ° C) ,the system immediately cuts off heating for safe.
-Temperature abnormal reminder: The display will alarms if the inlet water temp <37° F, or the outlet temp >167° F
Fundamentally Solve Customer Problems
TURELY SAFE compared to other Traditional electric water heater or storage water heater.
Note
18kw Electric Tankless Water Heaters need:
Breaker:2x40AMP
Cable: 2x8AWG
Volts:240/208
Compact Design
Save space design, allows you install it in non-traditional spaces such as the utility room, basement, garage, attic, crawl space or even a closet.
Easy to read digital temperature display, no any complicated requirements for installation without minimal noise output.
Size: 18x14x3.7in
Weight: 11.2lb
Well sealed packaged that you can get a intact product, no any dented or damage.
Save Money Save Time
1. Compared to traditional tanks water heater:
Rinkmo instant Electric Tankless Water Heater only turn on when you need hot water, reduce the store heat loss, saving up to 50% in water heating costs, and you can get the fresh water.
2. Compared to other Electric Tankless Water Heater:
Totally solve most of safe problem and high maintenance costs, more cost-effective under our Original Water Pipe and Electricity Heating Separate tech:
304 stainless steel water pipe, healthy.
No mineral builup, no need to clean it.
No dirty water
You don't need to ask a plumber to repairing machine multiple times.
Real savings for your future cost, time and money.
Good for Other Commercial Places
Rinkmo Electric Tankless Water Heater not only for home use, but also for many other commercial places where need instant, endless and safe hot water, such as: apartment, barbershop, hotel, beauty salon, gym center, restaurent and so on.
More Smart Design:
-High quality sheet metal shell, fireproof
-Screen shows actual outlet water temperature clearly instead of the setting temp, safer
-Machine will auto stop if no water be heated.
-Adapt to 2 voltages: 240V/208V both ok, just 1 button to set it when install
-Cleanable filter
First, before order unit, you need to check below things:
Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location.
Second
Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature.
Third
Next you need determining specifications and electrical infrastructure.
Product description
Specifications:
Start-Up Pressure:0.4-0.6MPa
Color:Gold
Power Source:Corded Electric
Plug:US Plug
Features:
Digital, Digital Display, Electric, Mini, Thermostat
Waterproof Rate:IPX4
Mounting Location:Indoor
Rated Voltage:110V
Type:Tankless Water Heater/Boiler
Size:Approx. 13.5 x 6 x 16.5cm/ 5.31 x 2.36 x 6.59"
Voltage:110/120 V
Rated Power:3000W
Frequency:50Hz
Item Width:2.36 inch
Rated Pressure:0MPa
Item Height:6.59inch
Water Temperature Range:35-45℃
Manufacturer Warranty:2 Years
Heating Material:304 Stainless Steel.
Package Include:
Electric tankless water heater x1
- 【Instant Hot Water】:3000W rated power 50Hz frequency can provide you hot water range from 35-45℃ , get instant endless hot water easily , As soon as you turn on the tap,you just need to relax and wait for the hot water to come out
- 【Lightweight Safety Design】: Mini size Approx. 13.5 x 6 x 16.5cm/ 5.31 x 2.36 x 6.59" and lightweight design for your home use. It can bring instant hot water for you at home when washing food or vegetable in kitchen
- 【Energy Saving】:Compact and light weight structure with extraordinary energy saving technology. This electric water heater are designed with advanced combustion technology to decrease gas consumption and burning noise. Save more when using our tankless water heater
- 【Safety Protection】: Leakage protection, IPX4 waterproof, Dry heating protection, Water-electricity isolation, Auto power-off at inactive state, Over-temperature automatic power-off
- 【Worry Free Purchase】: US STOCK, delivery in 3-5 working day. We provide high quality products and great after sales customer service,customers could reach us for any problems and we will reply in 24 hours to solve your problem
User questions & answers
Question: | Do you hook it up to the hot and cold line |
Answer: | Cold |
Question: | What amp circuit breaker does it require |
Answer: | 30 amp breaker |
Question: | What are the fitting sizes |
Answer: | standard faucet supply fittings.... disconnect the hot water supply from your faucet and it will connect to the heater. Add another supply line to finish the connection. |
Question: | does this require a 20amp or a 30amp circuit |
Answer: | 30 amp breaker |
Latest Reviews
View all
Cold Wrap For Arm
- Updated: 14.01.2023
- Read reviews

Book The
- Updated: 11.06.2023
- Read reviews

Croquet Game Sets
- Updated: 22.02.2023
- Read reviews

Quality Microfiber Sheets
- Updated: 08.02.2023
- Read reviews

Napoleon Biographies
- Updated: 08.07.2023
- Read reviews