12 best instant hot water heater for rv

Product description

Girard's new GSWH-2 is the culmination of years of research and experience. Girard listened to its customers and incorporated everything they wanted into its new RV Tankless Water Heater. Endless hot water that is easy to operate, turn on the hot water and add cold water to the desired temperature. The on-board micro-processor monitors the incoming cold water temperature, the flow rate and the outgoing hot water temperature to maintain a constant, steady hot water flow. The "state of the art" interior wall mounted digital controller shows the operating functions, allows for temperature setting from 95°F to 124°F, it also can be changed to Celsius. Parents will love the ability to pre-set the hot water temperature to a lower temperature and not worry that the water may get too hot! The UCP also features visual diagnostics which allows for easy trouble-shooting. Finally, a water heater door that is easy to open and close (sold separately). No more twist-latches! The hinged door and sliding latch allows fast, easy access to the water heater. The silicone exhaust ring moves for easy alignment of the exhaust tube.

• Regulates the burner to maintain the set hot water temperature
• NOTE: Water heater door is not included and must be ordered with Girard's 2GWHAM Water Heater
• 42,000 BTUs which provides the optimum performance for an RV's plumbing
• No special LP gas lines or special plumbing required
• 12V power that operates at less than 3A; Freeze protection - designed for winter use

User questions & answers

Question:	Does this have a winter use device (wud
Answer:	24W
Question:	Does it run on both electric or propane
Answer:	It requires 60Hz/110VAC and it is rated at 24W. Unfortunately for me, the HE is not listed by a nationally recognized testing lab, so the installation requirements are much more stringent. In my case the National Fuel Gas Code requires more clearance around it than I have in my water heater closet. So I returned mine.
Question:	Can this be used year round in nc where outdoor temps can dip down to 0f? the inside of camper would stay heated
Answer:	the cup holder is pretty large, so I think basic 12oz cups would fit fine
Question:	i have a 16x16 open hole what door do i need
Answer:	Yes, the cup dispenser is removable

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

 Color:BIS03-White (no remote control)



FEATURES



Mini-Tank Water Heater comes with 1.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.



ENERGY SAVING



This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 95% energy saving with help of its smart self adjustment technology.



HEALTHY WATER QUALITY



MULTIPLE SAFETY PROTECTIONS



Over temperature protection



Dry heating protection



Leakage protection



Water and electricity line separated



EASY INSTALLATION



Real compact design, water heater cooridates with scenes decor, under sink water heater, Can be shelf, wall or floor mounted. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.



SPECIFICATIONS



Power: 1.5kW



Voltage: 120V~50Hz



Min. water flow to activate the unit: 0.475GMP



Maximum temperature 167°F



Max. Amperage: 15A



Recommended wire size: 10AWG



Required circuit breaker : 1x1-Pole 20 AMP



KINDLY NOTE



1.The equipment is mainly used for sinks.



2.Mini-tank water heater should be installed professionally.



3.Please read instruction manual carefully prior to installation and use!

• The label on the right of the product is to allow customers to use the product more energy-savingly. We will improve the language expression in the future. We are very sorry.
• 【NOTE】Fill the water first, then power on (otherwise it will damage the water heater).
• 【SAFE DURABLE & LONGEVITY】304 Made of stainless steel and never rust，Anti-leakage plug，Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant，This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
• 【SMART INVERTER FOR ENERGY SAVING】Digital Display，Automatic heat preservation and storage of hot water, 3.0 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%，Maximum temperature167℉，The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
• 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design，Easy to control warmth.Vent valve, Tee pipeline， pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
• 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time，8-15 minutes to heat to your desired temperature).
• 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 18.0''L x12.6''W x10.2''H; 8.86lbs; 1/2″NPT NPT. 1.5 kW, 110-120 volts. One-year warranty and 24H customer service support, feel free to contact us.

User questions & answers

Question:	Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink
Answer:	Yes you can connect this unit to the hot water supply line from your existing hot water heater and have hot water delivered to your kitchen sink. This unit will reheat the hot/warm water to the desired temperature. This should ensure you have continued hot water.
Question:	what is the lowest temperature this can be set at
Answer:	86℉
Question:	Brass tee provided does not seal on the hot water outlet, any tips
Answer:	The brass 3 way T is not meant to connect to outlet nipple. It needs the 1/2 in compression connector provided with it.
Question:	Can this be mounted laying down or does it have to be in a vertical position
Answer:	It is vertical

Product features

AGU 1.5Kw Mini-Tanks Water Heater Electric

Features

Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.

Endless Hot Water - Digital Display，Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.

Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted，easy to install.

Hot water on call

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the AGUST: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the AGUST can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

INSTANTLY HOT WATER

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.

ENERGY EFFICIENT

It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.

KNOB ADJUSTMENT

Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet，Optimal energy efficiency is promised.

GREAT FOR SMALL SPACES

Water heaters are compact，It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

Product description

120V - requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2" of foam insulation. Glass lined tank for longer life. 6 year on heater and 1 year on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90. 1. See Info Page for technical and installation specifications.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
• INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
• RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
• IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	What is the recovery time if the 7 gallons of hot water is used
Answer:	I have the 4 gallon tank and it is not too bad for the reheat
Question:	Can I reduce the pipe's size from 3/4 in to 1/2 in without any negative effect on the unit
Answer:	No harm to unit.....Max water flow will be reduced a little.
Question:	Can i use this to replace a small rv hot water heater
Answer:	Yes, but realize that it's electric and draws quite a few amps, most rv water heaters are propane.
Question:	The Manual request for the ES8 a 20 Amp breaker and 12GA wire. The wattage however is 1440 with 12 Amps. Why then 20 Amp breaker and not
Answer:	I would use a 20 amp circuit with 12 ga wire but there are no inrush concerns with a resistive load. A heating element does not have a higher initial current draw like a motor. It draws 1440 watts or 12 amps at 120v. Since 14 ga wire must be fused for 15 amps, this device by itself is already at 80% of the circuit’s capacity.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

• 🎁【CSA Approved Safety 】CSA approved Gasland tankless water heater, safe as per Canadian and US Standard. Flame failure device, anti-freezing protection, over heating protection to ensure the family safety. Automatically decrease water pressure between 2.5-110PSI. The anti-freezing drain plug can discharge the residual water to avoid freezing in cold areas or in case of long time no use. High water temperature protection over 167 °F. Shut off gas supply automatically under unexpectable flameout.
• 🎁【Lightweight Portable Design】 Compact size and lightweight design for easily carry. It can bring a amazing hot shower for you when you are camping, to the beach, etc. Also you can wash your pets with this tankless water heater in outdoor. Hang it using the mounting bracket on the top/back of the gas water heater. It only takes you a few minutes to install it. Or you can install it according to the instructions.
• 🎁【On Demand Hot Water】 Maximum power output 41,000BTU/Hr, get instant endless hot water easily wherever you are. No need to preheat before using tankless water heater. As soon as you turn on the tap, the water flows with your desired temperature. Low water pressure start up, just need 2.5 PSI of water pressure. 1.58 gallons per minute of on-demand hot water. Fully adjustable heat and water flow.
• 🎁【Energy Saving】 Compact and light weight structure with 11.5% energy saving technology. The propane water heater exchanger and main burner are desinged with advanced combustion technology to decrease gas consumption and burning noise. You will save more when you use our tankless water heater.
• 🎁【Excellent Customer Service】We have professional team to offer you excellent service. If you have any question, please feel free to contact us from Monday to Friday.

Product features

WARM TIPS

√ 1、When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking.

√ 2、The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top.

√ 3、A gas leak detection is needed before use and please do not use flame for leak detection. Soapy solution, gas detectors, etc. are recommended to detect leaks.

√ 4、Please use only liquid propane as fuel and use it in a well-ventilated place.

√ 5、Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited.

√ 6、If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger.

√ 7、This water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions.

Outdoor Showers

Enjoying outdoor shower with endless hot water during camping trip.

On demand hot water

No need to preheat before using tankless water heater

Bathing Horses

Offering your horse with a relaxing shower in the afternoon.

Washing Dogs

Providing a comfortable sunbath for your pet dog.

EASY TO USE

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Copper and stainless components
• Lifetime warranty for residential use
• Save up to 60% on your water heating costs with the most advanced, self modulating technology available
• Never run out of hot water with an ECOSMART tankless water heater.

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature.
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter.
Question:	What is the power consumption of this tank-less heater
Answer:	The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly
Question:	remote
Answer:	This unit does not have the ability to have a remote temperature control.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

16L Propane Tankless Water Heater 4.3GPM 32KW

Specifications

Tankless 16L Gas Water Heater 4.3GPM

Heat Output Power: 32KW

Gas Pressure(LPG): 2800 Pa

Use Gas Type: Liquefied Propane Gas (LPG)

Rubber Gas Hose(Outer diameter): 20 mm / 0.79"

Suitable Water Pressure: 0.02-0.8 Mpa

Starting Pressure: 0.015 MPa

Thermal efficiency: ≥80.8%

Cold Water Pipeline: Short Pipeline equipped or G1/2" Steel Tube

Warm Water Pipeline: Long Pipeline equipped or G1/2" Steel Tube

Smoke Exhaust Pipe Output Diameter: 4.5" (Smoke exhaust pipe not included )

Exhaust Way: Open & Force flue exhaust type

Discharge Ways: Flue automatic gas discharge

Ignition Mode: Automatic electrical pulse ignition by 2 qualified 1.5V batteries (batteries not included)

Product Size: 13.7X6.3X25.6Inch(35x16x65CM)

Gross Weight: 17lbs

NOTE:

1. Every type of gas water heater is only suitable for one kind of gas. This tankless instant hot water heater uses Liquefied Petroleum Gas (LPG).

2. Concerning the safety, please do not install this water heating instant boiler in your bathroom but where ventilation is.

Feature

CE Approved

Adopt advanced energy-saving and combustion technology

Instant without waiting

Modern fashionable line shape appearance

Digital display with shower head

Save a lot of space

Manifold auto protection

High efficient & energy-saving

Automatic ignition system

Flame failure protection device

Anti-freezing protection function

Over heat protection

Over water pressure protection function

Low water-pressure startup

Stable water flowing under high pressure

Package Content

1 x Gas Water Heater Main Body

1 x Shower Kit

1 x English User Manual

• 【SUPERB MATERIALS】- Power: 32 KW; Hot Water Output: 16 L/min(4.3 GPM); Gas Supply: LPG(Liquid Petroleum Gas); Water Temperature: 50 °F -140 °F; This tankless water heater propane is crafted with stainless steel case and inner copper devices, making it anti-rust, high-temperature resistant, no water leakage, and durable. Come with a portable shower head kit.
• 【6-IN-1 MULTI PROTECTIONS】- Our propane water heater is upgraded with six protection ways to ensure your security on the shower, such as Over 75℃(167 °F) protection, low water flow protection, anti-frozen protection, over water pressure protection, no flame protection, 20min timer, etc.
• 【EFFORTLESS CONTROL】- You can easily adjust the water temperature by rotating the gas & water knobs on the panel. Switch the summer/winter mode to change the fire row amount, and save 40% gas in your bill. The combustion device will reach ≥80.8% thermal efficiency to save 11.5% energy. Start at a 0.015 MPA low water pressure; normal working pressure is 0.02 MPA-0.8 MPA.
• 【WALL-MOUNT & DETAILS】- This gas water heater is light-weight & portable to be installed on the wall, tree, or outside the RV for space-saving. Well-selected devices are included like copper standard G1/2" hose connectors, filtration mesh, gas emission tube, and copper water tank. Ignite the heater with 2 "D"cell batteries, and no pilot light is needed.
• 【DIVERSIBLE USE SCENARIOS】- CE test passed, fast to heat, this propane hot water heater is perfect for showering, pet washing, outdoor cleaning, camping and trip road, etc. Provide you with constant hot water, especially in winter or cold places. Instant, endless hot water, enjoy a comfortable showering at any time & any location.

User questions & answers

Question:	What size is the exhaust
Answer:	As long as the water can flow, the water heater can work normally. But in practice, if the temperature is lower than 5 degrees(41 fahrenheit), the pressure in the gas cylinder will decrease, and the gas cannot be supplied to the water heater normally, resulting in the water heater not working properly.Hope the information can help you.
Question:	I just want to verify if this can be installed indoors
Answer:	I am afraid it doesn't work with natural gas,just for propane.
Question:	Is it correct that this cannot run longer that 20min
Answer:	The unit must be installed at a ventilated place.Usually we don't suggest to install it indoor.
Question:	Is this on demand. Does it turn on when water is started or do you have to turn it on at every use
Answer:	1.12 volt power supply for the water pump.The 12V power source can come from the car battery.We provide a booster cable to connect the pump and the car battery. 2.The propane water heater still needs 2 pcs size D batteries，total 3V.

Product features

Stainless Steel Material

This RV water heater propane adopts brushed stainless steel shelling, which makes it anti-rust and fashionable. We also send you a shower head kit and install accessories for your convenient showering.

Six Considerate Protections

This on demand propane water heater is designed with methods like Over 75℃(167 °F) protection, low water flow protection, anti-frozen protection, over water pressure protection, no flame protection, 20min timer, etc.

LED Screen & Knobs

We adopt an LED screen to display real-time water temperature. Gas control knob: rotate it clockwise to increase the gas supply. Water control knob: turn it clockwise to get more hot water. Water temperature ranges from 50 °F to 140 °F.

Summer/Winter Mode

This product uses LPG as the primary energy source and the enclosed combustion structure to provide uniform fire and higher burning efficiency. The switch of winter/summer mode will change the fire row to save gas.

Convenient & Exquisite Details

Exquisite devices are considered in this product: filtration mesh, standard G1/2" copper water inlet & outlet connector, gas emission tube, D-type battery cases, and tin-plated copper water tank for safe use and durability.

Quick Install & Wide Use

Instant 16 L/min gas water heater with wall-mounted design offers a relaxing shower in the bathroom while the machine is installed in the kitchen, avoiding the risk of toxic gas leakage during the bath. Perfect for outdoor camping, pet washing, RV traveling.

16L LPG Hot Water Heater

This is an excellent hot water heater, which uses LPG(Liquid Petroleum Gas) as the main energy source. When started, it will supply endless hot water anywhere. With LED current temperature display and freely adjust the water temperature by gas & water outlet knob. Multi-level protection to ensure your safety. It is compact, wall-mount, and cool in look—a must-have home appliance for your room.

Product description

Details:

Tankless water heater

Instant heating abilities

Dimensions (Front panel): 15” H

Dimensions (Front panel): 15” W

Dimensions (Entire unit): 14.3” D

Dimensions (Back section): 12.7” H

Dimensions (Back section): 12.7” W

Dimensions (Back section):13.8” D

Water outlet and inlet

Gas inlet

Gas inlet measures 3.8” from the bottom

12V DC

Power port measures 7.42” from the bottom

Flat lock

Air inlet grilles

Decorative ring

With wired controller with power, temperature, and Celsius-to-Fahrenheit controls

Low water pressure startup

Flameout protection

Forced exhaust structure

Speed changing and wind resistance function

Water and gas linkage control

Fault auto-diagnosis and fault code display

• No more waiting for the water tank to warm up or running out of warm water halfway through your shower. With this amazing machine, you can have a steady stream of hot water flowing to your faucets or shower without waiting for the tank to warm up.
• There is a forced exhaust structure that keeps the air safe and clean while and after entering the combustion chamber. There is also a dust net to make sure no dirt gets into the tankless water heater.
• There is a low water pressure startup, which helps to protect the heater and make it easier to use.

User questions & answers

Question:	Can this be used with a recirculation system? IE> Have a constant flow of water through the unit at or near set temperature
Answer:	I don't see why it wouldn't. It starts heating water when water flows and turns off when water is shut off. You might go thru alot of propane.
Question:	What does the temperature heat up to and for how long? Does The water temperature heat up based upon the actual temperature of the water coming out t
Answer:	We have ours set on 115, and it will hold that as long as there is water and gas
Question:	what is BTU rating, is there and altitude restriction on this unit
Answer:	35,000 btus and there was no altitude restrictions on the info that came with the unit.
Question:	Does this model have freeze protection for use in colder climates
Answer:	Michele, yes, you DO need freeze protection! Without this feature, there is always water in the heat exchanger, and the low volume of water to high surface contact means this heater is more suceptable to damage than a tanked version which has a "cushion" of water to survive mild frosting, not deep freezes. Ronald, thanks! That makes me feel better, as we snow camp in the mountains at times where it warms up to 24 degrees by noon. 👍

• No More Wait for Hot Water - Point of use 4 gallons mini tank water heater provides instant hot water where you need it with fast recovery, reducing standby loss. Thermal efficiency up to 99%
• Easy Installations - Dimensions 14.5"W x 14.5"H x 12.9"D compact design, can be wall or floor mounted under sink / counter, plug into a standard 120V outlet, no special wiring required. Nominal current 12amps
• Adjustable Temperature - Thermostat with 3 temperature level settings, range from 50°F to 149°F with high temperature limit protection, also a freeze mode to prevent tank from freezing
• UL Certified & Durable - Enamel Coating Glass-lined tank for great insulation and preventing leaking, CASH USA made Temperature & Pressure Relief valve included, UL certified ensuring a safe long service life
• Specifications and Warranty - Dimensions: 14.5"H x 14.5"W x 12.9"D; Weight:19.8lbs; Water connections: 1/2" NPT, Electrical requirements: 1.44 kW at 120 volts, plug-in connection with 2 feet power cord; Max water pressure:150PSI; Nominal current: 12A. 3-year Limited Warranty for the tank, 1-year warranty for parts and 24hours customer service

User questions & answers

Question:	Will this supply enough hotwater for a stand alone shower
Answer:	It depends on how much water or how long you need for your shower. This ES700 6.5 gallon water heater can support a quick shower with low flow shower head. However this was designed for sink use, supporting up to 2 sinks.
Question:	How long for water to get hot
Answer:	20 easy
Question:	Anyone have a copy of the manual (e.g. pdf
Answer:	No just the hard copy that comes with the unit.
Question:	how to get to reset button
Answer:	I’m unaware of a reset button. You can turn the heater off by the thermostat dial or by unplugging it.

Product features

Thermomate Electric Water Heater

Available in 4 compact sizes, Thermomate mini tank water heater ES150/ES250/ES400/ES700 are specially designed for providing instant hot water at sink, counter or anywhere you need it for small amount of hot water use. It can be wall mounted under/over sinks with its included bracket, or just sitting on the floor (both must be in vertical position), featuring a simple 120VAc plug-in connection (ES700 must be hardwired), no special wiring required.

Instant Hot Water

Enjoy instant hot water at your sink or counter whenever you need it. No longer need to wait for hot water, saving time and waters

Premium Quality & Durable

Glass-lined tank, stainless heating elements, quality plastic shell ensuring long service life

Wide Range of Applications

Ideal under sink instant hot water heater for kitchen, bathroom, salon, bar, garage, basement, RVs, camper, boats, office

No More Wait for Hot Water

No long wait for hot water from your main water heater or even endure cold water. Just install our mini tank water heater at your sink in kitchen, bathroom or anywhere you need hot water yet far away from your central water heater.

It will provide you immediate hot water for hand washing, dish washes, rinse or cooking with thermal efficiency up to 99%, cut standby losses, save water, time and money.

Ideal under sink water heater for kitchen, bathroom, salon, bar, garage, basement, RVs, camper, boats, office, It works great as an independent hot water source, a supplement to your existing water heater, or inline as buffer with your tankless water heater.

Product description

:MOST IMPORTANT:

1. If you encounter problems during use, please contact our cs, we have a manual for answering questions for you refer to

2. The water heater is installed vertically, and the inlet pipe is installed below, and the outlet water pipe shoud be installed on above. Please make sure the water pressure is NOT LOW

3. The water heater connector are both G1/2(brass), Not suggest to use tape on connector, if you use tape at the interface of the outlet pipe, the water will slowly infiltrate into the water heater, the amount of seepage is very little and not easy to find. As time goes by, the water which infiltrate in water heater turns into steam, with the steam increases, the circuit is shorted and the water heater may burn out.

4. The problem of water not hot: the body temperature is generally 37 ° C (98.6 ° F), the temperature within 6 ° C changes, you feel the basic feeling of warm water, so the water temperature is 42 ° C (107.6 ° F), you may still feel just warm, not hot. As shown in picture 3, unless the inlet water temperature is high and the speed is low, the water temperature will be high, so generally you will only feel the water is warm, not cool, but not hot. IF YOU NEED VERY HOT WATER, PLEASE DON'T BUY



Specifications:

Material: Stainless Steel Shell

Color: Black

Power: 3000W

Current: 25-32A

Voltage: 110V

Rated Frequency: 60Hz

Rated Pressure: 0.4-0.6Mpa

Waterproof Grade: IPX4

Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)

Water pipe interface: G 1/2" interface

Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch



Package Included:

1 x Water Heater

2 x Fixing Screws

2 x Screws Protector

1 x Manual



Note:

Please note this item should get the water first and then link the electricity when installing.

• Ⓐ NOTICE Before PURCHASE: The water heater need a larger than 32 amps circuit breaker; the outlet water temperature won't very hot because the water heater just 3KW, so it can't be used to bath or wash hair, it can be use to wash hand or use in kitchen. If it doesn't meet your require, PLEASE DON'T BUY.
• Ⓑ SIMPLE OPERATION: Freely adjust water temperature by water flow, simple operation, you can enjoy hot water all-weather without wait. PLEASE KINDLY check the third picture which show the water flow spped and water temp.(test data)
• Ⓒ SAFE USE: Safe heater, electricity saving, water saving, no pollution, no exhaust gas, LCD digital temperature display(℃). In order to ensure safe use, all current and voltage power problems are strictly tested to ensure product safety before leaving the factory.
• Ⓓ HIGH QUALITY MATERIAL: Stainless construction with mini design, the connter is made of brass, the tankless water heater is durable and portable.

User questions & answers

Question:	buenas amigo se puede intalar uno solo para toda la casa
Answer:	Si es bastante eficiente
Question:	Will this work for a bath room sink and shower
Answer:	Hi, dear customer, so glad to answer your question, yes, this can work for a bath room sink and shower, the intake speed and the influent water temperature determined the final outlet water temperature( show in the third picture), you can check if the outlrt water temperature meets your needs. In addition, since this water heater is 3000W, there are requirements for the wire. It is recommended that you consult your electrician if the wire meets the requirements. Welcome to contact us if you need, have a nice day!
Question:	Can this work good to wash hair in a hair dressing salon
Answer:	Hi, dear customer, I am sorry I can't make sure the temperature you need in wash hair, you can have a look of the third picture, if you think the temperature is ok, you can purchase this. Because of the power of the water heater, it is necessary to ensure that the wire can withstand the corresponding current. If you purchase this, suggest you to consult the electrician whether the wire is ok.
Question:	Will this work for a toilet
Answer:	I would. It take the risk. During the winter, toilets run cold. Introducing hot water to it could potentially lead to cracking the porcelain toilet

Product features

3000W Mini Electric Tankless Instant Hot Water Heater with LCD Display for Home Bathroom Kitchen Washing US Plug 110V

Common Faults and Solutions:

1. Under normal power-on conditions, the water flow turns on, the water heater displays the temperature, but the temperature does not rise, there are 2 possibilities: the first is that the temperature control switch (overheat protection switch) inside the water heater has tripped. Control switch, it can be restored. The other is the heating tube failure, replace the heat tube

2. If there is a display of no heating, the display shows rotating, but no temperature is displayed, indicating that the water flow has not passed through the water heater, or the water pressure is too low, and the water pressure needs to be adjusted; , Then check the water heater inlet turbine, it may be that the turbine is stuck, causing the water heater to not start.

3. It is recommended that the length of the water heater inlet pipe should not exceed 3 meters. If it exceeds, there may be a water pressure difference due to the length of the water pipe, and the water pressure is not enough to start. (If the water tank is used for water, the water tank is required to be placed higher than 10 meters to make the water pressure Reached the start value)

4. The display shows E1, E4/E5 means temperature sensor failure, first cut off the power, run the machine with cold water, and then power on; the heating tube failure displays E2, means the heating tube needs to be replaced.

Water Temperature

CAN this unit be connected inline with existing hot water line?

ANWSER: It is recommended not to use it in series with other water heaters. If it is installed on a hot water pipe, the water heater will reheat to above 60 degrees. There is a 60-degree over-temperature power failure inside the machine. After the power is off, the temperature control switch in the machine will jump. If you want to restore manually, you must open the back cover of the water heater machine. There is an overheat protection switch button next to the heating pipe. It can be restored by pressing it. If you do not go to the restore button, the water heater will not work and heat, so we generally do not recommend installing it in the heat The water pipe is directly installed on the cold water pipe. It is recommended that the inlet water temperature should not exceed 30 degrees

CAN we set two of these up would 1 preheat water to warm & the other heat it to hot for higher temperatures at higher flow rates?

ANWSER: NOT recommended, when two water heaters are used together, it will reach 6000w, and there will be high requirements for wires. For safety, it is not recommended to use this.

Installation

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

📢 What are the benefits of using thermomate propane gas tankless water heater?



✅ 1. Starts up with only 2.5 PSI of water pressure, and up to 110 PSI! It's ideal for RV' s, campers, rural cabins, small apartments, flats, hunting cabins, as well as boats, sailboats, and mobile homes.



✅ 2. 34,000 BTU/Hr maximum power output, you can get instant endless hot water easily wherever you are. Our customers also use them for washing stalls, horse trailers, de-icing cars in the winter, outdoor camping, motels, small roadside restaurants and other situations where endless and economical water heating is required and water pressure is available at 10PSI.



✅ 3. This amazing instant water heater is designed for one point of use at a time.It delivers over 1.32 gallons per minute of hot water with a 77°F rise in temperature. This means that if your tap water is at 59°F, it will instantly deliver 1.32 gallons per minute of hot water at 113°F.



✅ 4. With remarkable electric pulse ignition technology that requires NO STANDING PILOT. The outstanding thermomate gas water heater saves up to 25% in gas consumption when compared to older technology lighted pilot lighted units. Even if in case of a power outage or no power supply such as in RV'S, campsites, boats and sailboats, you can still enjoy your hot water at home, as it uses 2 "D" cell batteries to ignite the electronic spark module.



✅ 5. It's designed by modern fashionable line shape. Magnificent thin-shaped & portable appearance，you can take it anywhere to get instant hot water.





📖 Specifications



Max. Flow Rate: 1.32GPM



Related Gas Pressure: 0.4 PSI



Power Rating: 34,000 BTU/Hr



Activation Flow Rate: 0.44GPM



Water Pressure: 2.5 PSI ~ 110 PSI



Flue Type: LPG ( Liquid Propane Only )



Power Source: 2 "D" Cell Batteries ( Not Included )



Vent Pipe: No needed for outdoor use

• [2.5 PSI Water Pressure Startup] Equipped with a magnetic water flow sensor, allowing the unit to work at low water pressure, stable water flowing to meet a wide range of usage for those in water shortage areas, including rural areas, RV's and Boats.
• [Instant Hot Water On Demand] Rated at 1.32 GPM, this water heater provides endless hot water on demand and only as needed, no need to preheat making it more efficient and energy-saving, saving up to 50% on water heating costs. 
• [Multi Safety Protection] Anti-freezing apparatus draining the stock water to avoid damage of freezing under cold areas to the machine itself or in case of a long time no use. Featuring overheating and flameout protection, the gas supply will shut off automatically under unexpectedly flame out or high water temperature over 185 °F.
• [Compact Exquisite Design] Compact and space-saving design with minimal noise output which is portable for outdoors.  A great partner for camping and road trips bringing an amazing hot shower for you when you are camping, hiking, fishing, beaching, etc. Besides, you can also wash your pets with this tankless water heater, or provide hot water for the swimming pool.
• [Easy to Install] Equipped with 1/2" BSP water fittings and manual water temperature controls make it easy to install and use. Please verify it's the right size you need: net weight 10.4lb; size 13.4(L)x4.7(H)x11.6(W); maximum power output 34,000btu/hour (10kW). Work with a 0.4PSI gas regulator (not included).

User questions & answers

Question:	Can you mount this on the floor on its back
Answer:	Thanks for your consultation, there is no vent for this unit, we suggest you to use it outside of the camper. Any problem please feel free to contact us. Thank you.
Question:	Can this be installed inside the trailer close to a roof vent
Answer:	The manufacturer's instructions say it is only to be used outside, and that it is not designed for a permanent installation. Having said that, mine is installed inside an RV under a window. We crack the window when we want hot water and I am fairly confident we are not putting ourselves in danger of carbon monoxide poisoning. We run it for short periods - a little hot water for washing dishes or short showers. If the intended uses involved running it for longer periods I would want to place a proper vent over it that went outside. In any case, be sure you are mounting it with suitable clearances from anything flammable above and to the sides.
Question:	Is there a vent for this unit? I want to use it inside my camper
Answer:	yes,, i believe it's a round disk type battery
Question:	It say that its no need to vent it so can this be used indoors without any problems
Answer:	It uses a CR2032. The case takes some work to get apart to replace the battery. You have to be careful not to break the tabs that hold top and bottom together. Once you have it open, the electronics will fall out if you're not careful. You can see instructions here: http://mopeka.com/homepage/instructions/

Product features

AZ132 Propane Tankless Water Heater

[ Low Water Pressure Startup ] Starts up with only 2.5 PSI of water pressure, holds up to 110 PSI, no need a pressurizer pump anymore. It works perfectly at low water pressure, stable water flowing under high pressure to meet the requirements of those in water shortage areas, especially those found in rural areas, RV's and Boats.

[ Tinning Copper Heat Exchanger ] Adopts a durable Tinning Copper Heat Exchanger, more high efficient energy saving, corrosion-resistant with a long lifespan.

Endless Hot Water On Demand

As a tankless solution with high-efficiency tankless gas water heaters that deliver a continuous supply of hot water, you save up to 50% on water heating costs. thermomate AZ132 uses only the energy necessary to heat water on demand. With thermomate you no longer pay to heat and maintain a tank of hot water.

Safety & Easy to Maintenance

The thermomate propane tankless water heater features a anti-freezing apparats, which can discharge the stock water to avoid damaging machine itself by freezing under cold areas or in case of long time no use. It does not require cumbersome and costly installation of flues and ductwork because it is outfitted with state of the art double ODS (Oxygen Depletion Safety shutoff device).

Get Hot Water Easily As Needed

Starts up with only 2.5 PSI of water pressure, and up to 110 PSI! It's ideal for RV' s, campers, rural cabins, small apartments, flats, hunting cabins, as well as boats, sailboats, and mobile homes. Make you and your family enjoy the comfort and convenience of continuous hot water whenever and wherever you want it.

Cost Effective & More Hygienic

The thermomate propane gas water heater adopts a durable Tinning Copper Heat Exchanger & stainless steel main burner, decreasing gas consumption and burning noise, more high efficient energy saving, more hygienic and healthier, corrosion-resistant with long lifespan.