14 best electric inline water heaters

• 【INSTANT & SUFFICIENT HOT WATER】Applied with 5.5KW heating system, the electric water heater supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those "lukewarm" toys.
• 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flow rate and temp setting in real time. For example, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 98% saves considerable electric charge.
• 【CONVENIENT USE】The tankless water heater comes with digital display & touch control panel so temp setting is easy job. Now turn on the tap and let the smart unit do the rest, you needn’t go through hard lesson about temp setting by a mixer tap without any hint. This Black model does not comes with Remote control, useful for installation under sink.
• 【SAFE and DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
• 【POINT of USE】The sleek tankless water heater is compact as an oatmeal box, making it possible to install anywhere close to outlet and avoid energy waste. It can be mounted horizontally, vertically, obliquely, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5kW@240V; dimensions 11" x 7.5" x 2.35"; pipes fittings :1/2" NPT.

User questions & answers

Question:	Unit needs to be reset if power goes out, is this normal? I have to get a ladder out to reset
Answer:	They are very size accommodating. They will fit small hands....
Question:	Can I take my shower with it
Answer:	I dont see any tags on them at all, but i plan on washing mine in the washing machine and letting them air dry or hang them in front of a vent or something.
Question:	Can this unit be used on a boat? I have a small 27' foot sailboat I would like to replace the older water heater
Answer:	Yes they are my life saver as carrying my huge, heavy camera everywhere outdoor at 30° F is part of my work nowadays. They're very stretchy, and they my hands stays toasty warm with them on when the weather turned really windy. And they provide a good quality grip. NICE GLOVES!
Question:	What type of fitting fits the intake side? It has a gasket that came with it. This side has a restrictor inside it it and needs somehting flush
Answer:	I used these for a holiday they keep me warm in north Minnesota(40 °F). And yes the touch screen works perfect when Im using my phone with 1 hand.

Product features

Electric Tankless Water Heater For Sinks

Being one of those limited choices with smart modulation heating, ECOTOUCH tankless water heater provides instant & endless hot water with optimal thermal efficiency of 98% and minimum energy cost. Thus, the tankless water heater heats up 1.2GPM water from 67℉ to 109℉, which out runs most point use water heaters and will sure cut your electric bill.

Designed with compact size, it is one of perfect solutions for Kitchen & Bathroom Sinks, Wet Bars, Strip Malls, Doctor's Office.

Instant hot water and endless

As soon as you turn it on, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheat or standby energy loss. The best part is you get endless hot water now, 24h service, anytime you need. Perfect for sinks.

More hygiene

No storage in bulky water tank for long time heating, avoids bacterial growth and rusting issue that do great harm to water quality. Besides, water pipe and electricity heating are designed to run independently so as to avoid scale build up, now you get steady stream of clean and fresh hot water.

Smart modulation and energy saving

Equipped with a smart modulating control for stable temp, the hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Optimal energy efficiency is promised.

Sleek & compact design

360 degree installation, lightweight design and compact as an oatmeal box, the tankless hot water heater is capable of and being located near by. It features a sleek and attractive design to blend seamlessly with decor.

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75" H x 13.75" L x 13.5" D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	Yes, that is correct! Look for 1/2 to 3/4" hoses here on Amazon, or whatever you connection size is. They are very cheap and convenient here.
Question:	would this be able to supply a shower
Answer:	Installed at the outlet of the water heater, mainly to prevent electric shock, which is the second layer of protection
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	Should it be a white line? It means it has been powered on and can work after waiting for your settings
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	Dear Customer,  Thanks for your inquiry,BISELONG this water heater is not equipped with a remote control, you only need to adjust the temperature you want, generally do not need to adjust again.If you get any other question, please feel free contact us at [email protected] any time, we will do best to serve and help. Wish you pleasant shopping. Fly form BISELONG

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

Specifications:

Material: Stainless Steel Shell

Color: Black, Golden, Red(optional)

Power: 3000W

Current: 25-32A

Voltage: 110V

Rated Frequency: 60Hz

Rated Pressure: 0.4-0.6Mpa

Waterproof Grade: IPX4

Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)

Installation wire diameter: 1.5-2.5mm² copper wire

Water pipe interface: G 1/2" interface

Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch



Package Included:

1 x Water Heater

2 x Fixing Screws

2 x Screws Protector

1 x Manual

Note:

1. Please note this item should get the water first and then link the electricity when installing.

2. You'd better install this item vertically to ensure long service time.

3. Please kindly make a note if you need any adapter.

4. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• This is a water heater ( 7.87 x 4.13inch ; 30-55℃ )for the application of changing the cold water into hot water and it will meet your various needs such as used in kitchen, bath room, public restroom, etc.
• electric water heater is a high efficient water heater with compact size to produce the hot water very quickly.LCD digital temperature display.
• water heater thermostat : Freely adjust water temperature by water flow, simple operation.
• Safe heater, electricity saving, water saving, no pollution, no exhaust gas.
• Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)

User questions & answers

Question:	Will this work in an r.v. with 30amp plug
Answer:	Yes
Question:	Will it switch off automatically when not in use
Answer:	Yes, it is tankless, so it only draws electricity when you turn on the hot water faucet. It turns off when you turn off the faucet. No need to unplug it when not in use.
Question:	Can this be used on an out door hose, to make hot water come from the hose? I am looking for hot water for dog washing
Answer:	Only if the hose is connected to it after it has been installed in an up-right position, in a dry, covered space.
Question:	If connected to a hot water line (for quicker hot water) will it keep the water the same temp or will it heat the hot water more making it unsafe
Answer:	we found that it was not overly efficient and replaced it with a different unit.

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°

• External digital thermostatic control with LED display (+/1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper immersion two heating elements, field Serviceable. Flow Rate- up to 4.4 GPM
• Simple installation – bottom 3/4 inch NPT water connections
• Threaded for easy replacement, simple installation, digital temperature display

User questions & answers

Question:	Can this be used in a recirculating system
Answer:	No where on the box does it say contains copper. Box reads.... 100% nonstick surface - hand washable and dishwasher safe- PFOAF Free, PTFE- fiberglass coating, safe up to 500 degrees, FDA approved. We are happy with our purchase.
Question:	How many amps
Answer:	Of course it can.
Question:	how many breakers and what amp
Answer:	No
Question:	will this supply two showers, washer and dishwasher for two people? (1000 sf house
Answer:	Made in China

Product description

Extensive applications



This 8l water heater is a lightweight electric water heater with a perfect combination of inner quality and classical appearance, which applies for multiple demands of different families. It can be placed in the space exquisitely where is decorated by you elaborately, and embellish your furniture much more wonderfully. This product uses green environmental material, which is qualified for international standard, and satisfies difficulties of hot water supply for multiple places, easily solves issues such as face washing, bathing, vegetable washing and dish washing. It can be installed in the kitchen, rest room, bathroom or any other places you want optionally because of its characteristics of small area, strong applicability and convenient installation.



Easy to Use



It is a directly heating type with high efficiency and low power heating tube, which can take advantage of the thermal energy maximally. The temperature can be adjusted between 55℃-75℃ optionally, and the power will be off automatically when the set temperature is achieved. Its total power is 1500w and it has multiple installation methods. It is applicable for different water pressure of different areas, especially for families which are located on higher floors with low water pressure.



Technical Parameter



Rated voltage: 110V 50HZ



Rated power: 1500W



Temperature adjustment scope: 55℃-- 75℃



Minimum water pressure: 0.02MPa



Water-Proof level: IPX4



Include



1x Body of water heater



1x Operation manual

• ✅【Electric Water Heater】- The Temperature can be adjusted between 55℃-75℃ optionally, and the power will be off automatically when the set temperature is achieved.
• ✅【 Instant Hot Water Heater Under Sink】- Its total power is 1500w and it has multiple installation methods. It is applicable for different water pressure of different areas, especially for families which are located on higher floors with low water pressure.
• ✅【Rv Tankless Water Heater】- This mini tankless water heater electric 110v product uses green environmental material, which is qualified for international standard, and satisfies difficulties of hot water supply for multiple places, easily solves issues such as face washing, bathing, vegetable washing and dish washing.
• ✅【Water Heater Blanket】- This water pre heater is a lightweight electric water heater with a perfect combination of inner quality and classical appearance, which applies for multiple demands of different families. It can be placed in the space exquisitely where is decorated by you elaborately, and embellish your furniture much more wonderfully.
• ✅【Water Heater Electric】- It can be installed in the kitchen, rest room, bathroom or any other places you want optionally because of its characteristics of small area, strong applicability and convenient installation.

User questions & answers

Question:	Could this be used with my mixer shower
Answer:	The lowest temperature setting is 110 degrees, and the max is 212 degrees. It allows settings in 10 degree increments from 110-200.
Question:	Is it suitable to be installed under a sink
Answer:	Thank you for your inquiry. The range is from a minimum of 110 degrees F to 212 degrees F.
Question:	Please provide dimensions
Answer:	A tea kettle is one of the choices for this listing.
Question:	Can you install it laying on its side
Answer:	It is not Alexa smart BUT you can easily buy a wall outlet or plug which is, and then name it Tea Kettle (or whatever you want) and then just tell Alexa to turn the "tea kettle" on/off. https://www.amazon.com/Insteon-Independently-Controllable-Technology-Reliability/dp/B00QL8EPME

Product description

120V - requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2" of foam insulation. Glass lined tank for longer life. 6 year on heater and 1 year on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90. 1. See Info Page for technical and installation specifications.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
• INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
• RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
• IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	What is the recovery time if the 7 gallons of hot water is used
Answer:	I have the 4 gallon tank and it is not too bad for the reheat
Question:	Can I reduce the pipe's size from 3/4 in to 1/2 in without any negative effect on the unit
Answer:	No harm to unit.....Max water flow will be reduced a little.
Question:	Can i use this to replace a small rv hot water heater
Answer:	Yes, but realize that it's electric and draws quite a few amps, most rv water heaters are propane.
Question:	The Manual request for the ES8 a 20 Amp breaker and 12GA wire. The wattage however is 1440 with 12 Amps. Why then 20 Amp breaker and not
Answer:	I would use a 20 amp circuit with 12 ga wire but there are no inrush concerns with a resistive load. A heating element does not have a higher initial current draw like a motor. It draws 1440 watts or 12 amps at 120v. Since 14 ga wire must be fused for 15 amps, this device by itself is already at 80% of the circuit’s capacity.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

1. The thermoflow Elex 5.5-Plus electric tankless water heater is from Germany,stylish & compact design to blend seamlessly with decor, can be wall mounted, saving more valuable living space and providing endless hot water on demand.

2. With a upgrade concealed automatic rotate digital temperature control display, when the unit is working, the temperature and function keys are all bright. When the faucet is turned off, the temperature display and function keys are all off. Beautiful and energy efficient.

3. The display automatically rotates when the upper and lower mounts are installed, and each function key also rotates automatically. Make it very easy to install and use , perfect fit for kitchen sinks , bathroom sinks which is far away from the main water heater for the house to provide instant hot water in point of use.

4. Constant temperature electric instant water heater, even if flow or inlet water temperature rates vary up or down.Concealed LED digital temperature selection in 1 degree increments gives users complete control of hot water.Temperature range from 95°F to 131°F.

5. High-quality electronic control components, PCB sensors. Faster heat transfer, higher energy efficiency, savings of up to 50% on water heating costs.



Specifications



Power: 5.5kW

Voltage: 220-240V

Frequency: 60 Hz

Nominal current: 23A

Required breakers:1 x 2-POLE 30AMP

Required wire: 1 x 12 AWG

Max water pressure: 115PSI

Water connector: 1/2" NPT

Wire length: 31.5 Inches (80cm)

Dimensions: 5.4" x 7.4" x 3.4

Weight: 3 lb

Certificate: CSA listed

IP rating: IPX4



What Will You Get:



1 x Thermoflow Elex 5.5-Plus Electric Tankless Water Heater

1 x Plastic Bracket

1 x Bag of Installation Accessories ( 2 Screws, 2 Anchors, 2 Seals, 1 Strainer)

1 x Instruction Manual



Inquiry & aftersales service: [email protected]



Hotline:＋1（844）334-4203

• 【2S INSTANT & SUFFICIENT HOT WATER】No need to preheat before using, 2 seconds instant hot, faster heating. As soon as you open the faucet, the water flows with your desired temperature. With 28" fixed power cable, must be hard wired
• 【GRAVITY INDUCTION LED TOUCH DISPLAY】Features a new upgrade concealed automatic rotate digital temperature control display, a real-time of the water temperature will display when the unit is working, so that you can clear at a glance. Temperature range from 95 °F to 122 °F.
• 【SMART MODULATION SYSTEM】Applied with exclusive Electric Temperature Control (ETC) ensures a steady output temperature, no waiting for preheat nor terrible temp up & down, perfect companion for sinks.
• 【TANKLESS & ENERGY SAVING】Save up to 60% on your water heating cost with a Thermoflow electric tankless water heater. Distribution, start-up and technical systems losses as well as circulation and storage losses are eliminated.
• 【POINT of USE for SINK ONLY】The sleek tankless water heater is compact which can be held in one hand, making it possible to install in narrow space. It can be mounted vertically or upside down, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5 kW@220-240 volts; dimensions 5.4" x 7.4" x 3.4 ; pipes fittings 1/2” NPT; max water pressure: 115PSI; required wire: 1 × 12 AWG; required breakers 1 x 2-POLE 30 AMP. Breaker is NOT included.

User questions & answers

Question:	How long can i run this unit...lets say like recirculating water in a tub
Answer:	This Ombre Light Ash Brown Wig with bangs fit for most head sizes and shapes with elasticated breathable rose net and adjustable straps inside. You can loosen or tighten the wig to reach a most comfortable condition. It is very convenient for daily wear, I wear it continuously during working hours. Heaven, it’s solid, hope this would help.
Question:	Can this heater be used as a booster to an existing water heat? We have a long run to the kitchen sink and we waste a lot of water waiting for it to
Answer:	I wear it for my birthday. This Ombre Light Ash Brown Wig is very beautiful. My friends are complimenting me. My daily wear has also become a beautiful landscape, this wig is worth having. hope this would help
Question:	What other purchase needed to install if I buy a Elex 5.5-Plus unit
Answer:	Yes, just use a wide tooth comb to comb it, pay attention to the mesh below.I personally love the ombre golden blonde wig. it's easy to take care of and after you wash it and soak it, the same as the new one
Question:	Is there any video for the installation
Answer:	Yes it can run without ejector and yes depends on the pressure switch settings

Product features

Elex 5.5 plus Tankless Water Heater Electric

Saves Energy and Money - Adopts to advanced technology of Germany.Changing to this Elex 5.5 plus means there are no standby losses. No need to preheat before using,no any waste for water or electricity.

Endless Hot Water - Instant hot water thanks to rapid and maintenance-free bare wire heating systems. For as long as it is needed, there is an endless supply of hot water.

Space Saving - Very compact designed,saving valuable living space and providing endless hot water on demand.

Electric Point of Use Tankless Water Heaters

Thermoflow Elex 5.5 plus electric tankless water heater is a true Point of Use Model because it is specifically designed for over or under the sink,multiple applications with a maximum flow rate of 1 gallon per minute (gpm) .This heater is flow controlled, meaning the temperature will adjust according to flow rate. At 72°F inlet temperature the Elex 5.5plus can heat 1 gallon per minute to 105°F. It can also heat one hand sink emitting 0.5 gpm to 105°F with inlet temperature as low as 42°F. Its compact size allows for over or under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Bathroom Sinks. When sized properly this water heater will provide endless hot water.

Instantly Hot Water

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it. Due to short water lines and modern technology.

Saving Energy

No more long water lines and circulation losses because the units are installed directly at the point of use. The water is no longer preheated and stored in large amounts.That saves energy. And it saves investment costs: Long water lines, circulation pumps and hot water tanks are no longer necessary.

More Hygiene

Electric instant water heaters heat up the cold water to the perfect temperature within seconds, directly at the tap, as it flows through the unit. The heated water is used immediately and unused water is avoided in the water line systems. That’s why testing for Legionella bacteria becomes unnecessary. This is what makes de-centralised water heating more hygienic and efficient.

Great for Small Spaces

Water heaters are compact and lightweight and can be undersink or oversink installed - features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

• 2 PCs 16” long 1/2”FIP x 1/2”FIP,Stainless steel water hoses ,Vent valve,included
• 【NOTE】The cold water pipe has a safety valve, which is marked with a water pressure of 0.75MPa. When the water pressure in your home is greater than this value, the safety valve will automatically drain. At this point, you only need to contact us, we will send you a 0.9MPa exhaust valve, you can solve this problem
• 【SAFE DURABLE & LONGEVITY】Made of stainless steel and never rust，Anti-leakage plug，Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant，This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
• 【SMART INVERTER FOR ENERGY SAVING】Automatic heat preservation and storage of hot water, 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%，Maximum temperature167℉，The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
• 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design，Easy to control warmth.Vent valve, Tee pipeline， pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
• 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time，8-15 minutes to heat to your desired temperature).
• 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 13.0''L x11.4''W x10.6''H; 9.5lbs; 1/2″NPT NPT. 1.5 kW, 110-220 volts. One-year warranty and 24H customer service support, feel free to contact us.

User questions & answers

Question:	How is it that this is energy efficient if it constantly maintains a heating temperature that you can use on demand? Is there an off/on switch
Answer:	Most rinnai tankless weather it is out door or indoor, have a control board to adjust temp and either on or off
Question:	I connected the water in the water heater already. But the pressure didn’t pumt the water to the sink
Answer:	It can definately be out doors in freezing temps, tho power failure arent good for it while in a freeze, tho keep in mind it will use alot more energy for frost protection, indoor units are safer amd more efficient in this case
Question:	Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink
Answer:	I bought model V65EN. It came with a wired digital controller. The installer did not run the wire into the house and mount the controller indoors. He simply set the controller at 120 degrees and left the controller inside the unit. If I want to change the temp, I have to take the cover of the unit.
Question:	Will this work for an outdoor shower
Answer:	Good place to check for info like this is Wikipedia. Here is what they say: Energy efficiencieseditMore tangible cost savings are defined when comparing the energy efficiencies of gas heaters with low NOx emissions with conventional flued types. Gas heaters with emission problems are flued and inherently lose substantial energies in the form of hot flue gases to the atmosphere. In addition, the choice of placement of flued heaters is greatly impaired due to flue installation restrictions.In contrast, dedicated low emission gas heaters do not require a flue system. Furthermore, with the introduction of oxygen depletion sensors and thermostatic controls, they do not place critical reliance on ventilation as previously was the case. These heaters can be positioned more conveniently and centralised to affect optimum warm air distribution. By definition unflued low NOx gas heaters are 100% efficient as all heat energy released from the flame is converted to useful heat.Hope this helps. June

Product features

BIS 1.5Kw Mini-Tanks Water Heater Electric

Features

Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.

Endless Hot Water - Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.

Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted，easy to install.

Hot water on call

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the BISELONG: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the BISELONG can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

INSTANTLY HOT WATER

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.

ENERGY EFFICIENT

It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.

KNOB ADJUSTMENT

Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet，Optimal energy efficiency is promised.

GREAT FOR SMALL SPACES

Water heaters are compact，It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

Product description

The 3M Aqua-Pure Whole House Scale Inhibition Inline Water System AP430SS is designed to help reduce scale build-up and corrosion - thereby helping to extend the life on hot water-using appliances such as water heaters (standard (gas or electric) and tank-less), boilers, clothes washers and dishwashing machines, and on plumbing fixtures like faucets, pipes, and shower heads. The AP430SS provides a flow of up to 10 GPM with ¾” NPT inlet/outlet connections. Scale is calcium and magnesium deposits that often form when hard water is heated. Water hardness is responsible for most scale formation in pipes, water heaters, finishes and flat surfaces, and other water using appliances. Over time scale build-up can significantly shorten the life of any water-using appliance. Also scale buildup inside pipes causes loss of water pressure as the interior gets smaller and smaller over time. The AP430SS contains polyphosphates to bind calcium and magnesium hardness minerals, helping to prevent them from precipitating out (or becoming a solid) and building up on metallic surfaces. Polyphosphates also helps prevent corrosion by forming a thin protective layer on the metal surface. The 3M Scale Inhibition Water System AP430SS is tested by NSF International to NSF/ANSI Std. 42 for material and structural requirements only. The overall single vessel/cartridge design of the AP430SS makes the 3M Aqua-Pure AP431 Water Filter Cartridge change-out easy for professionals as well as end users. Change disposable filter cartridge every 6 months or sooner if you observe noticeable reduction in water flow rate. The AP430SS is to be installed on the cold water supply line of the water heater or at point-of-entry of water into the home. Tools and parts required (not included): one ¾” stop and waste valve (compression type), PTFE tape, two ¾” male x ¾” street adapters, one ¾” compression gate valve, and pipe cutter. Read all instructions carefully before attempting to start installation. The existing shut-off valve remains in place and still acts as the cold water shut-off. This filter system has 3/4” connections. The AP430SS can be adapted to various pipe sizes by using reducing adapter on either end. Installation fittings can be sweated or threaded. Use galvanized fittings for installation of galvanized pipe. Aquapure by Cuno hot water system protector to reduce scale build up in pipes and extend life of water heater. Installs on cold water side of hot water system to inhibit scaling and corrosion.

From the Manufacturer

Aquapure by Cuno hot water system protector to reduce scale build up in pipes and extend life of water heater. Installs on cold water side of hot water system to inhibit scaling and corrosion.

• HELPS PROTECT HOT WATER HEATERS: Polyphosphates, included in this product, help to inhibit scale build up in hot water heaters (both standard (gas or electric) and tank less styles) and boilers; Helps extend the life of hot water heaters and hot water using appliances, pipes, and downstream plumbing fixtures such as faucets and shower heads
• MAINTAINS EFFICIENCY: By inhibiting scale build up on heating elements, helps maintain water heater efficiency
• EASY TO REPLACE: Easy change out of the 3M Aqua-Pure AP431 Replacement Water Cartridge makes system maintenance easier
• HIGH FLOW RATES: 3/4 Inch NPT inlet/outlet connections for easy installation and high flow rates (rated for up to 10 GPM); System to be installed on cold water line feeding the water heater
• CORROSION RESISTANCE: 304 stainless steel head can be installed on existing copper pipes in the home; It consists of a corrosion resistant material that provides long service life
• NSF STANDARD 42 CERTIFIED: Tested by NSF International to NSF/ANSI Std; 42 for material and structural requirements only
• PRODUCT SPECIFICATIONS: System has a pressure range of 25 to 125 PSI (862 kPa) and operating temperature of 40 to 100F (4.4 to 37.8C)
• IDEAL FOR any size home

User questions & answers

Question:	Just received. It appears a lot of water bypasses the filter, can someone confirm this is not the case? Mine is just like customer uploaded photo
Answer:	Not a filter, a water treatment cartridge. Rated at 10gpm by the manufacture, a small amount of the water flow is diverted down into the cartridge through a single hole in the elevated tab, in the center of the tee. The polyphosate is slowly dissolved and a small amount of treated water flows back up and out 3 small holes around the elevated tab. According to the manufacture it only takes 2-3 parts per million to treat for scale. A little bit will do ya.
Question:	Does this help with water spots on glasses and scaling on bathroom fixtures
Answer:	We have a lot of calcium in our well water. The heat from the hot water tank is what causes the minerals to form scale. We placed this on the cold water side of the hot water tank and noticed a big improvement in water quality, especially on shower doors and dish washer. I have changed it twice now. The first time at 3 mos because the info says it can clean up existing scale in pipes and fixtures. The bottom line is if your water is very hard that will affect how much benefit you get from this product. So will you be happy with a 50% improvement in quality? I know I am cleaning faucet screens a lot less. Still have a jug of vinegar around though! Hope this helps.
Question:	GPM seems to low. I have 2 Tankless units, EACH one does 9 GPM
Answer:	we have an electric tank less that is rated at 4.5 GPM. We have very hard water in this part of MA and also have a well. We have been in this house for 30 years and have had problems with pipes rotting away. When we installed the electric tank less we installed this filter also. We used the heater for a few months and than had the plumber perform the maintenance suggested by the tank less mfg. It was clean as a whistle. Our flow rate is not as high as yours but if you had one in line with each heater - i would think it would work fine. Our heater used 120A for 4.5 GPM - if yours is electric it most use a lot of power! For our use I am very satisfied with the filter and given our water quality situation and how clean the heater was - i would highly recommend this filter.KR in MA
Question:	Can this system be installed with the filter in the horizontal position (copper pipe is running vertically
Answer:	In my opinion, if this is collecting any particles before getting into Tankless water heater, the particle should fall in vertical direction so filter should be installed in vertical direction. I installed my filter in vertical direction before cold water is getting in to the tankless. In order to get a right answer, it would be the manufacture because they are the one who designs the filter.

Product features

Scale Inhibition System

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°

• ON/OFF Dial Control with adjustable digital temperature display
• Self-modulating power control
• 24kW Model Flow Rate: up to 5.9 GPM for RTEX-24
• Bottom 3/4" NPT water connections
• On demand, consistent and continuous hot water

User questions & answers

Question:	Can this directly replace a 40 gal tank heater with a 30A double pole breaker? What are power requrements
Answer:	No it can't. RTEX-24 requires 3 sets of wire and ground, and it needs 3x 40amp breaker. That's a total of 120amps
Question:	Can you use the 10/3 for one of the cicuits
Answer:	No. It requires three legs of 8-2.
Question:	Can the unit operate as a rtex-18 if i only hook up 2 of the elements? because i only need the 18 specs as of now but would like the option to upgrade
Answer:	Actually you can do this but you must be careful on which circuits are connected. Rheem says the elements are activated from right to left as power is required. The right most element connection also provides power to the control so this must always be connected. If the very left element is left disconnected, you will only get 2/3 of the rated power on a 3 element unit.
Question:	Why are 2 answers for the breaker requirements. Is it 3 double 40 or 3 double 60 amp
Answer:	If the unit draws 40 amp. you need a 2 pole 40 amp breaker 2 #8 wires good for 40 amp and 1 # 10 wire for a bond. Now if the unit draws 60 amps you need 2 # 6's good for 65 amps. A 2 pole 60 amp breaker and 1 # 8 for a bond( ground wire).

Product features

Rheem 240V 3 Heating Chambers RTEX-24 Residential Tankless Water Heater

Professional Classic tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications.

Performance Features

• On demand, continuous hot water
• Compact and stylish with digital temperature control in increments of 1°F ranging from 80°F to 140°F
• 99.8% Energy efficient
• Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement
• Simple Installation
• Digital temperature display

Applications

• Standard Hand Sink – 0.5 GPM
• Washing Machine – 1 to 1.5 GPM
• Kitchen Sink – 1 to 2 GPM
• Dishwasher – 1 to 2 GPM
• Water-Saver Shower Head – 1.5 GPM
• Standard Shower Head – 2.0 GPM
• Bath Tub – = 4 GPM
• Whole-Home – up to 6 GPM

Average Gallons Per Minute (GPM) based on 2010 Plumbing Standards.

Unique Features

• External Digital Thermostatic Control with LED display (+/- 1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper Immersion three heating elements, field serviceable
• Simple Installation – Bottom 3/4"NPT water connections

Product description

The Hydro Quip Pure Heat is a Convenient and Versatile In-Line Heater thats Designed to Fit in Compact Areas.

• Dimensions with power box: 4".H, Width of power box: 1.67"., Length of power box: 4.5".
• 120V; 1.0 kW
• 3'. corded plug connection
• Heater on light
• Automatic smart thermostat

User questions & answers

Question:	do u need a electrician ti install it
Answer:	You should have it installed on its own deticated circuit. If your removing an older heater and replacing it with this one you should be fine installing it yourself.
Question:	Can the heater be connected to the fill outlet coming out of the wall which dumps directly into the Jacuzzi tub from the shower head
Answer:	No, this needs to go in the recirc piping. You still need to fill the tub with hot water from your water heater, this heater just maintains the temp.
Question:	I have a large diameter line running to the pump, and coming out of the pump it immediately T's off to two smaller diameter lines. Due to height restriction, could I put this on the line feeding the pump, or on one of the discharge lines? Can you recommend a better fitting heater in the 1.0 kw range
Answer:	There is a model available that should fit on the discharge of your pump that basically replaces that tee and will plumb into your piping that now connects to the tee.
Question:	How is the heater connected / inserted inline or screwed inline
Answer:	The heater is plumbed inline on the discharge side of the pump. If your bath tub does not have the factory 7" cutout you will install the tail pieces which are supplied. These fittings have threads on one side & the other is where you will glue your plumbing into.

Product description

Features -

1. Stores up to 2.5 Gallons of Water to supply hot water where you need it.

2.Save water by eliminating the wait for hot water to reach the faucet.

3.Easy installation.Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps.

4.The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water.

5.An external dial allows you to easily control the temperature range, and the CSA listed temperature-and-pressure relief valve enhances your safety.

6.A sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.

7.Water Heater measures: 17.25"" H x 11.75"" L x 10.38"" D;Weighs: Approx.20 lbs.



Important Tips -

1.Install the Temperature & Pressure Relief Valve supplied with the water heater, but DO NOT over tighten!

2.Before plugging in the water heater power cord into an outlet, be sure the system is completely charged with water and all air is removed.

3.This water heater is designed for only 110-120V electrical dervice! DO NOT connect  to a higher or lower voltage.

4.Before servicing or cleaning the water heater, disconnect the power cord from the electrical outlet.

5.DO NOT Tamper with the reset button to override overheating shut down.

6.Please read the instruction manual carefully before you install or using the water heater!



What's in the Box

1 x UL listed Camplux ME25 mini tank electric water heater unit

1 x CSA & ASME listed temperature & pressure relief valve

1 x accessories package（2 anchors & 2 mounting hooks ）

1 x instruction manual



Inquiry & aftersales service: at [email protected]

Serivce Hotline: 844-538-7475

• Saving Energy & Money - Built in insulation foam, reduces heat loss. 2.5-gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it.
• High Quality Built & Elegant Design- Camplux electric water heater has glass-lined tank for long service life and easy to maintain. Elegant streamline design cover, made your kitchen more pretty.
• UL Approval Safety - Thermostat Control allows adjustment of water temperature. High Limit device provide protection while overheating.
• 43.3‘’ cord plugs into 120 volt outlet for independent installation or in-line with a large hot water source.(Max. water pressure is 150 PSI, CSA listed Temperature & Pressure relief valve included)
• Can be shelf, wall or floor mounted ; Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Product dimension:11.75" W x 17.25" H x 10.38" D.

Product features

Features -

• Camplux ME25 Piont-of-Use Mini-Tank Water Heater stores up to 2.5 Gallons of water to supply hot water under sink or basin where you need it.Perfect for a basement wet bar, patio kitchen station, garage, attic, or even in an RV or on a boat, hot water will quickly be in hand.
• Save water by eliminating the wait for hot water to reach the faucet,reducing the heating losses.
• Easy installation.Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps.
• The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water.
• An external dial allows you to easily control the temperature range, and the CSA listed temperature-and-pressure relief valve enhances your safety.
• A stylise and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.
• Water Heater measures: 17.25" H x 11.75" L x 10.38" D;Weight: Approx.20 lbs.

Thermostat Function & Freeze Protection

• The CAMPLUX mini-tank water heater is equipped with an adjustable thermostat that once set will automatically control water temperature.The red indicator lamp remains illuminated while the water is being heated.
• When the water heater is not being used for an extended period of time and there is a risk of freezing, either unplug and drain the water heater or turn the thermostat knob to the snowflake position to guard against freezing.

Installation Tips for T/ P Relief Valve

Comes with CSA listed temperature /pressure relief valve. Install the T/P valve into the threaded opening at the top of the water heater using heavy duty teflon tape.Do not over tightern! Orient the discharge tubing so that any discharge from the valve will exit within 6 inches above, or at any distance below the structural floor, and cannot any live electrical part.

High Efficiency Heating Element

Camplux ME Series Mini-Tanks are glass-lined tank designed, which is easy to maintain and durable for long life. Also it is high efficiency for heating, saving energy and your bills.

Plug-In Style, Easy to Use

Very easy to install, just plug into a 120v electric supply socket. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water.

Quick Hot Water Supply

CAMPLUX ME Series Mini-Tank Water Heater fits for under sink. Provides hot water quickly at point of use and comes with CSA listed temperature /pressure relief valve installed - 2.5 gallons / 4 gallons / 6 gallons tanks feature a simple 120 V plug-in connection (1440 watts).

Reduce Heating Losses

Short distance hot water supply, minimize wait time for hot water,saving energy and your bills.Whether as a sole water heating source for a single sink or as a supplement to an existing heater located far from the sink, this premium mini-tank water heater's stand-by loss is minimal !

2.5 Gallons Capacity

2.5 gallons capacity glass-lined tank, stores up to 2.5 gallons water to provide hot water where you need it. Fast recovery rate eliminates long waits for hot water at your sink. Supplies up to 2 sinks at a time.

Friendly to Small Spaces

CAMPLUX ME series Electric Mini-Tank Water Heaters are lightweight and compact designed, and can be floor, shelf or wall-mounted, very friendly to any small spaces.

Product description

Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eco smart heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater. Lightweight and compact, these units plug into a standard 110 volt outlet.

• Sleek and compact design with digital output temperature display
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• Manufactured in United States
• 12 A

User questions & answers

Question:	how many amp is this unit need one below 25 amp is this what i need
Answer:	A 20 amp circuit is sufficient.
Question:	Any idea of the flow rate? and maybe the "Keep Hot" flow rate as well. thanks
Answer:	Flow rate as fast or slow as you want it. You only have 6 gal hot. Temp varies from warm to scalding so watch out.
Question:	how many amps circuit does it need and does it need to be dedicated
Answer:	Unit is rated at 12 amps. A dedicated circuit is recommended using a 30 amp breaker. The unit comes with a 3ft cord with molded plug, so be careful not to overload an existing circuit.
Question:	Does this manufacturer offer "thankless" water heaters as the description states? I don't think I could handle having an ungrateful hot water heater
Answer:	There are gas, electric, or propane tankless water heaters, yes. Technically the mini tank water heaters aren’t tankless, but still deliver hot water in 1/2 a second.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.