12 best condensing boilers

Product description

The I- Series i150SN model features Rinnai’s exclusive self-cleaning stainless-steel heat exchanger coupled with a secondary flat plate heat exchanger. This heat-only model can deliver whole house heating to enhance your comfort. The i150SN provides an input rating of 150K Btu. Fueled with either Natural Gas or Propane this Rinnai condensing gas boiler has obtained one of the highest AFUEs (Annual Fuel Utilization Efficiency) in the industry. Plus, the compact wall-mounted design saves space over traditional boilers. Professional Installation Recommended – call 833-746-6212 for assistance.

User questions & answers

Question:	How many zones can I run with this unit
Answer:	It can control two zones with external pumps. A separate controller is needed for more zones than 2.
Question:	im in salt lake its high altitude is this unit made for that also i have 2 inch pic exhaust and intake air thats 25 ft each is that acceptable
Answer:	Rinnai boiler are built and designed to be installed at altitude. Just have the installer follow our recommended setting in the parameter settings in the product during installation related to your altitude. Rinnai’s condensing boilers use 2” PVC venting or larger based on length of vent run. You must use PVC pipe or a stainless steel type called category 3 venting. Please work with your installer on the system installation and venting. --Tashay
Question:	Is an install kit needed - and if so, what is it? Thanks
Answer:	No you can make your own
Question:	Does this package include the standard accessories usually included by Rinnai? Propane conversion, vent adapter, relief valve, etc
Answer:	yes works great with my natural gas

Product description

The T-H3-DV-N is well suited for residential/ commercial applications such as small restaurants and beauty salons. Complies with Ultra-Low NOx regulations. Utilizing commercial grade copper alloy for the heat exchanger tubing, the T-H3 is also suitable for heavier residential usages such as space heating or domestic recirculation systems. Certified up to 10,100 ft. altitude. With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

From the Manufacturer

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

• Endless hot water, On-demand usage, Compact, Space saving, Energy conservation
• Computerized safety features, No pilot light to have to worry about
• Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes
• Satisfies the 2012 SCAQMD Rule 1146.2 for Ultra-Low NOx Emissions
• Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel, Integrated controls and power cord as standard features

User questions & answers

Question:	My plumber is looking for the exhaust venting for this tankless hot water heater.. Pipe for exhaust, 90 degree iPod, gasget? Help
Answer:	The exhaust pipe in the manual is this one https://www.amazon.com/gp/product/B00ED10Y6C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	Will this suffice for a 4 bathroom home in Dallas? Looking at temperature rise of ~45 degrees (110 desired minus 65 groundwater temperature
Answer:	It's 10 gal/min... if you have a shower that is NOT a water saver and uses 6 gal/min... someone is going to miss out, no problem on the 45 deg rise, but we find that 130 deg is more desirable and still no problem in Albuquerque where the water temp MAY go into the 30s but most likely not less than about 45... HTH
Question:	Where is it manufactured
Answer:	JAPAN by one of the best hot water heater manufacturers in the world. Few if any can compair with Takagi, IMHO! Best unit I have ever installed, bar-none!
Question:	what does "condensing" mean in this case
Answer:	I can't stop laughing after reading the answers + there are 11 people with less clue who found the "explanations" useful... Guys, please allow me to explain the process: The condensation units have a secondary heat exchanger which takes the exhaust from regular 80% efficiency and "works" the water again in order to heat it even more, while cooling down the exhaust. Doing so the exhaust will be cool and it will condensate. This condensed exhaust will run down the vent and is gathered in an internal tray from where it goes to the condensation drain. Under NO CIRCUMSTANCES is the condensed exhaust in contact with your hot (or cold) water. By re-using your exhaust (hot), the efficiency will show on paper an additional 15% -17% added to the standard 80% of a conventional water heater.

Product description

Noritz introduces the cb series of combination-boilers: the newest line of condensing combination boilers capable of delivering whole home hydronic heat and industry leading volume of domestic hot water (dhw) for large homes, including those in colder climates. The new cb series combi-boilers are designed for quick and easy installation and also include features to deliver valuable cost SAVINGS. Cb series combi-boilers also take up as much as 80 percent less space than a traditional floor-standing boiler and water heater. Some of the exciting new features include Max flow up to 9.2 gpm, 140 degree domestic water heating capability even in winter months, grundphos internal pump, and scald prevention technology.  The new Noritz cb series is coming in January 2016 and will be available in 180K and 199K btu models.

• Min gas input: 18K btu, max gas input: 199K btu
• Energy factor: 0.95
• Max flow rate: 9.2 GPM
• Max gas input for space heating: 120K btu
• 11:1 turndown ratio

User questions & answers

Question:	Hi I have a steam will that work for me
Answer:	No, absolutely not. This is a combination hydronic baseboard and domestic hot water only.
Question:	What exhaust vent do you need? Is there a kit I will need to go up 6to 8 feet
Answer:	After an initial tuning period, this boiler is fantastic. It runs like clockwork. There are kits, but our installer didn't use one. Only pipe and two elbows at the top (intake and exhaust face downward with screen covering openings - minimum 3-4ft apart) 6 to 8 feet is not an issue, we are at about 16-20 feet vertical. As noted, you will need both a fresh air intake and an exhaust. The installation manual states 3" schedule 40 PVC. We are running higher temperatures for baseboard heating, so we opted for the more expensive, higher temp schedule 40 CPVC pipe for both. Link to installation manual => https://support.noritz.com/download.php?file=Literature%20Page/Installation%20Manual/CB199_180_0616.pdf&field=InstallationManual
Question:	Are there 2 heating circuits on these boilers
Answer:	One heating and one priority domestic hot water, I have zoned these for multi zone systems using honeywell zone valves and switching relay
Question:	How large a boiler do I need for an old (100 yr) 2400'sq 2-storey house? How large a tankless water heater for a 2 1/2 bath house
Answer:	Not an easy answer for you. Btu heat loss is determined by geographic location, insulation values, ect

Product description

The Sauermann SI 1801 Centrifugal Tank Pump is designed to be easily installed whatever the layout of the premises. Capable of evacuating up to 132gph (500 l/h), the Sauermann SI1801 pump is suitable for air conditioning units and industrial refrigeration displays. Strong, the Sauermann SI-1801 tolerates charged, high temperature and mild acidic condensates (pH>2.5) produced by gas condensing boilers and comes with safety switch wires

Product description

Rinnai takes tankless water heating one step further with condensing technology that delivers more efficiency than ever before. Enjoy all the same tankless benefits you’ve come to expect from Rinnai, plus even greater energy savings. Features: 95% Thermal Efficiency Natural gas or propane Indoor Installation Only 98° F to 140° F Residential Temperature Range 98° F to 185° F Commercial Temperature Range Commercial Controller Must be Purchased Separately Gas Rate Input BTU's: 15,200 - 199,000 Electronic Ignition Meets California and Texas NOx Emissions Standards Compatible with Full Line of Rinnai Digital Controllers 12-Year Warranty on Heat Exchanger, 5 Year Parts, 1 Year Labor for Residential Installations Specifications: Width: 18.5" Height: 26" Depth: 10" Weight: 61.7 lbs Gas Connection: 3/4" Water Connection: 3/4"

• INDOOR installation only. Fuel Type: NATURAL GAS.
• Concentric or PVC venting option
• Up to 0.96 Energy Factor/Up to 0.92 Uniform Energy Factor
• The space-saving design allows Indoor Installation type
• Ultra low NOx emissions
• 199,000 max BTU

User questions & answers

Question:	When installing this with the Ubbink horizontal concentric kit is a condensate collector needed in addition to the 12 or 21" kit? Finding mixed result
Answer:	I would say yes as I understand it the concentric is just the air intake and exhaust you would have condensation either way. I have mine draining into a reservoir with a pump that pumps it to the drain. If you install withount it will just blow water on the ground and there's your answer.
Question:	What is the difference between the ruc98i and the ruc98in
Answer:	RUC98i is the basic model number. RUC98in incicates it is meant for natural gas applications. MyPlumbingStuff
Question:	Is an expansion tank necessary for the tankless WH
Answer:	No expansion tank was needed
Question:	is this comes with Isolation Valves and Pressure Relief Valve (included in the box
Answer:	Yes, this will come with everything need except venting. Rinnai is the only manufacturer to offer both concentric and twin-pipe PVC venting. No adaptor is necessary to give double the venting options on every installation. MyPlumbingStuff

Product description

The 3M Aqua-Pure Whole House Scale Inhibition Inline Water System AP430SS is designed to help reduce scale build-up and corrosion - thereby helping to extend the life on hot water-using appliances such as water heaters (standard (gas or electric) and tank-less), boilers, clothes washers and dishwashing machines, and on plumbing fixtures like faucets, pipes, and shower heads. The AP430SS provides a flow of up to 10 GPM with ¾” NPT inlet/outlet connections. Scale is calcium and magnesium deposits that often form when hard water is heated. Water hardness is responsible for most scale formation in pipes, water heaters, finishes and flat surfaces, and other water using appliances. Over time scale build-up can significantly shorten the life of any water-using appliance. Also scale buildup inside pipes causes loss of water pressure as the interior gets smaller and smaller over time. The AP430SS contains polyphosphates to bind calcium and magnesium hardness minerals, helping to prevent them from precipitating out (or becoming a solid) and building up on metallic surfaces. Polyphosphates also helps prevent corrosion by forming a thin protective layer on the metal surface. The 3M Scale Inhibition Water System AP430SS is tested by NSF International to NSF/ANSI Std. 42 for material and structural requirements only. The overall single vessel/cartridge design of the AP430SS makes the 3M Aqua-Pure AP431 Water Filter Cartridge change-out easy for professionals as well as end users. Change disposable filter cartridge every 6 months or sooner if you observe noticeable reduction in water flow rate. The AP430SS is to be installed on the cold water supply line of the water heater or at point-of-entry of water into the home. Tools and parts required (not included): one ¾” stop and waste valve (compression type), PTFE tape, two ¾” male x ¾” street adapters, one ¾” compression gate valve, and pipe cutter. Read all instructions carefully before attempting to start installation. The existing shut-off valve remains in place and still acts as the cold water shut-off. This filter system has 3/4” connections. The AP430SS can be adapted to various pipe sizes by using reducing adapter on either end. Installation fittings can be sweated or threaded. Use galvanized fittings for installation of galvanized pipe. Aquapure by Cuno hot water system protector to reduce scale build up in pipes and extend life of water heater. Installs on cold water side of hot water system to inhibit scaling and corrosion.

From the Manufacturer

Aquapure by Cuno hot water system protector to reduce scale build up in pipes and extend life of water heater. Installs on cold water side of hot water system to inhibit scaling and corrosion.

• HELPS PROTECT HOT WATER HEATERS: Polyphosphates, included in this product, help to inhibit scale build up in hot water heaters (both standard (gas or electric) and tank less styles) and boilers; Helps extend the life of hot water heaters and hot water using appliances, pipes, and downstream plumbing fixtures such as faucets and shower heads
• MAINTAINS EFFICIENCY: By inhibiting scale build up on heating elements, helps maintain water heater efficiency
• EASY TO REPLACE: Easy change out of the 3M Aqua-Pure AP431 Replacement Water Cartridge makes system maintenance easier
• HIGH FLOW RATES: 3/4 Inch NPT inlet/outlet connections for easy installation and high flow rates (rated for up to 10 GPM); System to be installed on cold water line feeding the water heater
• CORROSION RESISTANCE: 304 stainless steel head can be installed on existing copper pipes in the home; It consists of a corrosion resistant material that provides long service life
• NSF STANDARD 42 CERTIFIED: Tested by NSF International to NSF/ANSI Std; 42 for material and structural requirements only
• PRODUCT SPECIFICATIONS: System has a pressure range of 25 to 125 PSI (862 kPa) and operating temperature of 40 to 100F (4.4 to 37.8C)
• IDEAL FOR any size home

User questions & answers

Question:	Just received. It appears a lot of water bypasses the filter, can someone confirm this is not the case? Mine is just like customer uploaded photo
Answer:	Not a filter, a water treatment cartridge. Rated at 10gpm by the manufacture, a small amount of the water flow is diverted down into the cartridge through a single hole in the elevated tab, in the center of the tee. The polyphosate is slowly dissolved and a small amount of treated water flows back up and out 3 small holes around the elevated tab. According to the manufacture it only takes 2-3 parts per million to treat for scale. A little bit will do ya.
Question:	Does this help with water spots on glasses and scaling on bathroom fixtures
Answer:	We have a lot of calcium in our well water. The heat from the hot water tank is what causes the minerals to form scale. We placed this on the cold water side of the hot water tank and noticed a big improvement in water quality, especially on shower doors and dish washer. I have changed it twice now. The first time at 3 mos because the info says it can clean up existing scale in pipes and fixtures. The bottom line is if your water is very hard that will affect how much benefit you get from this product. So will you be happy with a 50% improvement in quality? I know I am cleaning faucet screens a lot less. Still have a jug of vinegar around though! Hope this helps.
Question:	GPM seems to low. I have 2 Tankless units, EACH one does 9 GPM
Answer:	we have an electric tank less that is rated at 4.5 GPM. We have very hard water in this part of MA and also have a well. We have been in this house for 30 years and have had problems with pipes rotting away. When we installed the electric tank less we installed this filter also. We used the heater for a few months and than had the plumber perform the maintenance suggested by the tank less mfg. It was clean as a whistle. Our flow rate is not as high as yours but if you had one in line with each heater - i would think it would work fine. Our heater used 120A for 4.5 GPM - if yours is electric it most use a lot of power! For our use I am very satisfied with the filter and given our water quality situation and how clean the heater was - i would highly recommend this filter.KR in MA
Question:	Can this system be installed with the filter in the horizontal position (copper pipe is running vertically
Answer:	In my opinion, if this is collecting any particles before getting into Tankless water heater, the particle should fall in vertical direction so filter should be installed in vertical direction. I installed my filter in vertical direction before cold water is getting in to the tankless. In order to get a right answer, it would be the manufacture because they are the one who designs the filter.

Product features

Scale Inhibition System

Product description

Rinnai V53DeP Tankless Water Heaters, 5.3 GPM, V53DeP-Propane/5.3

• Endless hot water for your entire home
• V53DeP HE High Efficiency Tankless Hot Water Heater - Propane: Outdoor Installation Only
• Up to 5.3 GPM hot water flow rate (varies by groundwater temp)
• Control-R 2.0 mobile app features timers and schedules throughout the day and allows you to remotely put the system into vacation mode.
• Residential Factory Warranty - 120 months (heat exchanger), 12 months (labor), 60 months (parts)

User questions & answers

Question:	Can the temperature output be adjusted to 105F
Answer:	Sinks have aerators to slow down the water where a tub doesn't. It sounds like one possibility is that your exceeding the GPM for this heater. Next possibility, double check an measure your actually getting at least 240v at the heater, I had an issue where my unit was only getting 235v an it was causing a similar issue where only one of the two heating elements was activating. I had it set to 125F but it was coming out 100F. It was warm and without a meter I would of thought it was working correctly until I tried filling a tub. It couldn't even get the water warm. I pulled my wires out an restripped an cut an screwed them in an it fixed my problem, now its measuring around 245v. Make sure there is no copper showing after screwing down your input wires. Now filling the tub I noticed after about 10-15 seconds the water gets too hot to touch. I set it to 135F.
Question:	Can I use the Rinnai V65EP in Denver, Co? Temperatures during the winter can get below zero
Answer:	No tank, so, no overflow line required. It mounts on the wall. A pan is needed if required by building code in your city.
Question:	Does this unit come with controller? rinnai tech said i needed a mc-91-2us controller? do i need to buy separate
Answer:	good morning,60 amp breaker and , number 6 cable !thank you have a great day!
Question:	What does the "Low NOx Mean
Answer:	Hello-The RTEX-13 requires 1x 60A@240V breaker / 6 AWG recommended wire size.Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=Specification-Sheet&id=fc3235b7-7cd0-42cd-93bc-7169ea92be31 Rheem 800-432-8373I hope this helped :)Ben
Question:	We have a 500sq' apt. 1 kitchen sink, 1 lav sink and tub/shower. This tankless heats water to both sinks but nothing to the tub/sh. Help
Answer:	It’s next to the side cover on the front of the picture shown. The circle next to the cover is the hole for the 3/8 fitting and wire to go through.
Question:	Do these tankless water heaters require an overflow line to the outside of the home or a pan like is required on normal water heaters
Answer:	I believe it draws nearly 1800 watts ( 15 amps at 120 volts). Mine took about 6 days to arrive at a rural location in Central Wisconsin.
Question:	what are the wiring and power requirements
Answer:	To be honest I would not buy it. It came dented like it fell off the. Truck.. No support from ups, amazon or manufacture . I had no choice but to install it. Holding my breath.... It's up to you..... it came bare bones....
Question:	How many amps are needed for rheem rtex - 13 240v heating tankless electric water heater
Answer:	Not a 220v. This is 2000 watts, 120 volt //Amps 16.67 (20 amp)

Product features

About Us

Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925. While the company has produced a number of products in its nearly 100 years of operation, Rheem is currently the manufacturer that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is one of the largest manufacturer of water heating products in North America.

Endless Hot Water

Put an end to scheduling your hot water need.

• Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.

Hot Water On-Demand

Don't waste while you wait.

• Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
• While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.

Save Valuable Space

Your hot water heater doesn't have to be a behemoth!

• Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
• Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.

Affordable, Efficient Savings

Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.

• Use 40% less energy than traditional tanks* because you heat water only when you need it.

100 years of Confidence

Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.

• Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
• Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.

Sustainable Reliability

It's a smart investment for now and the future when you intertwine sustainability and reliability.

• Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
• Average life expectancy is 20 years vs. 8-10 for a traditional tank**
• With this premium product, you'll save–both money and worry–in the long run.

Product description

The NORITZ NRC66DV is a fully condensing tankless water heater with an advanced heat exchanger design and built-in controller. With flow rates up to 6.5 gallons per minute the NRC66DV delivers the highest flow rates in its category and can be vented using 3" Schedule 40/80 PVC, PP or CPVC.  Various adapters and terminations are available to allow for a wide array of venting options.  This unit ships complete with a 6' power cord.  IK-WV-200-1-XX-LF valve kit (required for installation) is sold separately. Common companion items include rain cap (PRC-1), atmospheric conversion kit (SVCK-3) and horizontal termination/intake PVT-HL.

From the Manufacturer

Indoor tankless water heater up to 6.5 gallons per minute. Noritz has been an innovator in the water heating industry for over 60 years. We introduced the first modern, electronically controlled tankless water heater in 1981 and we remain the leader in energy savings and superior hot water delivery today. Our goal is to empower you with the highest quality products available at superior value.

• Endless hot water
• Can be vented with Schedule 40 PVC Pipe and Fitting
• High Efficiency
• Low Nox
• Remote thermostat & 6' power cord included

User questions & answers

Question:	Is the water temperature regularated at the showers' manifold or at the tankless heater
Answer:	Both. The maximum temperature is regulated at the tankless heater. You control the shower temperature the the shower controls by mixing in cold water to the hot
Question:	Any problems installing over a clothes washer?, it's in a garage on an outside wall (10ft high
Answer:	Should be no problem, since it is high efficiency, just vent both directly outside with pvc and a screened downed turned elbow, they are already the proper distance apart for min clearances of each other. Exhaust needs to be min of 8" from window or door.
Question:	What is the ef on this product? looking to get one with 0.90 ef or better. i did see it is energy start
Answer:	1.0
Question:	Is 6.6 gpm adequate for showers
Answer:	Should be more than adequate for multiple simultaneous showers (depends on type of shower head, temperature you like the water, etc.). I often shower while the washing machine is running with no problems. This unit has performed well for us.....hopefully it will be durable as well (in service about 7 Mos so far).

Product description

"The Stiebel Eltron Tempra 24 Plus Tankless Water Heater features exclusive Advanced Flow Control German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 24 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE - ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 24 KW/18 KW; Min. recommended household electric service 150 A; Amperage draw: 2 x 50 A 2 x 44 A; Number and min. recommended size of circuit breakers: 2 x 50 A (DP); Number of runs and min. recommended wire size (copper): 2 x 6/2 AWG; Max. temperature rises: 92 F/82 F at 1.50 GPM, 73 F/54 F at 2.25 GPM, 54 F/41 F at 3.00 GPM, 37 F/27 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4"" NPT."

• CONTINUOUS FLOW – Advanced Flow Control patented technology invented by Stiebel Eltron, automatically maintains water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity. Hot showers will never be interrupted again
• SPACE & ENERGY SAVER – Its small, sleek white design saves space yet still provides endless hot water for your whole house, and no venting is required. Eco friendly unit saves energy with auto-modulation and the ability to electronically control water flow. Savings monitor even shows how much you save on energy costs
• EASY OPERATION – Electronic switch activates the hot water heater and it’s noise free while in use. Has a digital temperature display and preset temperature and memory buttons, while the interior solid copper heating system does all the power work
• TEMPRA 24 PLUS – This specific model is 24kW, 240V, requires a min recommended electric service of 150 A, and offers an output water temperature of 68° to 140°F. Check our guides below to compare features of our various Trend and Plus models, each available in different kW levels
• WARRANTIES INCLUDED – Stiebel Eltron’s top-rated electric tankless water heaters perform with the highest standards for comfort and reliability. Our 7-Year Leakage and 3-Year Parts Warranties are included with purchase

User questions & answers

Question:	How can i make tempra trend 24 work with my bosch shx33a05uc/22 dishwasher? the dishwasher will not advance to next cycle. water is not hot enough
Answer:	This water heater activates at 0.5 GPM and will heat to your set temperature at the correct flow rate for that set temperature. Please call our Technical Department at 1-800-582-8423 Ext 6 with more details so we can help you better. (for example, does the dishwasher have its own heating element, distance between the 2 units, etc...) Thank you.
Question:	Electric panel is ~50 feet from where i want to install the tempra 29 trend. is this distance ok for #8 thhn wire
Answer:	The recommended wire is 8/2 and there is not a limit to distance written in the install directions. You need to check with your electrician. Make sure he is state license and insured. We have installed a Tempra 29 and our electrician ran three 8/2's approx. 30' with no question. But check with your electrician and local codes. God bless you and happy New Year.
Question:	Is there an installation kit available for this? i am installing in a remote location & plumbing parts are not available? water lines are pvc
Answer:	There is no specific installation kit. However, we suggest using flexible braided hose connections that screw onto the hot and cold water for the first 18" or so. These connections are easy to remove to check a filter screen or if needed to work on the unit in general. The connections are 3/4" NPT. Please feel free to call our Technical Support Department at 1-800-582-8423 ext 6 with any questions. Thank You.
Question:	Where is it made
Answer:	We asked the Manufacturer and they replied: "These are made in Holzminden, Germany"

Product features

1 Find your approximate ground water temperature on the map.

2 Check the column on the table to see how many fixtures can be supplied at the same time for each model.

Product description

M090CN Boiler Max HTG Btu 90K DHW 160K Combi NG

• Rinnai M090CN - Natural Gas Condensing Boiler
• Flexible venting options with approved Concentric, PVC, CPVC, Stainless Steel, Polypropylene (rigid and flex), for single-pipe exhaust, room air and two-pipe systems
• Stainless steel primary boiler heat exchanger for unmatched performance and durability; Copper nickel integrated DHW plate heat exchanger
• Compact wall-mounted design saves space over traditional boilers
• Features an integrated modulating pump, and outdoor reset sensor (in the box)

User questions & answers

Question:	How many btu is it
Answer:	The BTU output for the M060SN is 60000.
Question:	Is there propane conversion
Answer:	Yes this will have a liquid propane conversion and a natural gas conversion
Question:	is this unit for space heating
Answer:	No it’s a combi boiler that is installed in place of your water heater and boiler/furnace.

Product description

The T-H3M supplies hot water to domestic hot water systems (directly or indirectly) which can be used with storage tanks, recirculation systems, hydronic heating systems, radiant floor systems, and/or domestic & heating applications, The T-H3M is a high efficient, condensing thankless water heater perfect for residential applications. With gas inputs of 120,000 BTU, the T-H3M can produce enough hot water for two bathrooms in warmer climates or 1.5 baths in colder climates.

From the Manufacturer

SAFETY FEATURES: Air-Fuel Ratio (AFR) Sensor, Exhaust & Water Temperature Safety Control, Overheat Cut-Off Fuse - INTERNAL FREEZE PROTECTION SYSTEM - POWER DIRECT VENT DESIGN: Exhaust, 3" PVC Venting up to 70 Feet or 4" PVC Venting up to 100 Feet, Provides flexible venting with PVC, CPVC, or ABS Pipe for Intake and Exhaust (solid core only), Category IV Stainless Steel venting can also be used

• Inlet, outlet thermistors for constant temperature monitoring
• Perfect for light residential and radiant heating applications
• Manufactured in Japan

User questions & answers

Question:	Can i connect the pvc vent from this unit to an existing double-walled steel chimney that will be used for nothing else
Answer:	YES
Question:	H2O temperature rise? We have cold ground H2O year round so need 80 degree rise min
Answer:	The Takagi T-H3M will give you a 45 degree temperature rise at 6 gpm. This unit is good for 2 major applications at one time. GlobalTowne is an authorized Takagi distributor.
Question:	What method have people who have installed this used to address the coupling diameter being too large? If seen 1 guy used a lathe to turn it down
Answer:	impossible to use a lathe?? the vents are quite simple using plastic PVC ipe fittings.
Question:	Will this as a stand-alone heat a 1200sqft house with baseboard heat
Answer:	prabably but just go on their website and it will give you the answer for all the different size units

Product description

Rheem Prestige RTGH-RH11DVLN-2 is a high efficiency condensing indoor natural gas tankless water heater designed for continuous hot water. The built-in recirculation pump with auto-learning programing not only provides instant hot water but also only provides it when needed. Industry leading low flow activation with a minimum flow rate and minimum activation flow rate of .50GPM. Ultra Low NOx burner meets SCAQMD rule requirements of safety for low emissions. Additional safety features include flame sensor, overheat cut off switch, gas and water leak detectors, and exhaust and water temperature sensors. Venting up to 100’ with 3” PVC or up to 50’ with 2” PVC pipe. Can be used with up to 5 bathrooms depending on inlet temperature; .94UEF (.96EF Canada), 199,000BTU efficiency. Professional installation is required otherwise warranty void. Warranty: 12yr heat exchanger, 5 yr parts and 1 yr labor.

• Exclusive Water Savings technology conserving up to 1, 100 gallons per year
• 199, 000 BTU (gas consumed per hour)
• Built-in recirculation pump
• Instant hot water
• For use indoor only

User questions & answers

Question:	Is there a power pack that can run this model during a power outage
Answer:	Not one thru Rheem. You could use one designed for computer backup, but I would have to imagine it would large and rather expensive.
Question:	Is this for indoor
Answer:	This unit can be installed indoor or in the garage. Go to the Rheem.com website. It will give you all the details.
Question:	Does this come with all of the necessary parts for the recirculating feature to work, or are additional parts required
Answer:	I haven't uncrated my box. Will be having it installed tomorrow (May 4). A certified heating and cooling technician can answer this better than I can.
Question:	Will this run on LP
Answer:	some Rheem tankless water heaters use LP. Others use natural gas. Go to the Rheem.com website for details.