7 best amazon home services hdmi cables

Product description

NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz, 802.11 a/b/g/n/ac wireless router or gateway, Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Troubleshooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature: 32°to 104°F.

• Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
• AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
• Universal compatibility: works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
• Wired Ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
• Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
• Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location

User questions & answers

Question:	My family has two appartments next to each other, both separate electrical installations. Would this work if we wanted to split the internet bill
Answer:	Yes the EX8000 used as a wifi extender you have the option of having a guest network. You can use same SSID name as your main router or use a different SSID altogether. I did have issues with more than one extender on the same network using same SSID name as main router so I had to change one of the extenders to a different SSID.
Question:	Has anyone connected a ps4 of xbox one to the wifi from the range extender? if so, signal and game play any good
Answer:	If you mean an AT&T router signal, yes. If you mean cell tower signal, then no.
Question:	Does it create a new sid or does it exteneded your current sid, so one does not have to switch to differing networks when in range
Answer:	the input voltage is from 100 to 240 volts
Question:	I don't understand how some people give this 4-5 stars and others can't get it to work and give it 1 star
Answer:	there are 4 ports. I use multiple ones as this is the only system I can find that does not change the network name but once a year I also have one break and have to replace it or hard reset it myself.

Product features

Discrete Wall Plug Design

Plug into a wall outlet for a sleek solution that extends your router's range and stays out of sight.

Smart Connect up to 15 Devices

Intelligently selects between dual bands to minimize interference and maximize speed for your smart wireless devices.

5-Minute Setup

Connect to your existing router with one button press, connect devices to your network, and you’re done.

Connect a Wired Device, Too

One 10/100M Ethernet port lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.

Universally Compatible

Works with any WiFi router for hassle-free reliability.

Product description

Wirelessly stream your entire music library, favorite music services, and thousands of radio stations to any room. Place the SONOS PLAY:3 Wireless Hi-Fi System vertically or horizontally, mount it on a wall or hide on a shelf. Set up simply, and expand until every room in your home is packed with music. Control the SONOS PLAY:3 Wireless with free apps for your phone, tablet, and computer.

• Delivers richer and deeper sound than play:1, making it perfect for spots where you have more room
• Connect your play:3 to any Amazon echo or Alexa enabled device, then just ask for the music you love
• Play different songs in different rooms at the same time; Or, pump one song in perfect sync, throughout your home
• Set up in five minutes using your home wifi; Easily expand your home audio system over time by adding wireless speakers to additional rooms whenever you’re ready
• Wirelessly stream all your favorite music services like Amazon music, Pandora, Apple music, and Spotify

User questions & answers

Question:	Would 2 play 3 speakers sound better then one play 5? I already own a play
Answer:	Yes, you would have true stereo sound and a fuller volume to the room.
Question:	Will this work with a winows os for control or must it be android or applie
Answer:	I use Phonos on Windows Phone and it does the job (if you are asking about actual Windows Mobile 6.5, then there is no app for that). The developers have worked very hard on functionality and are constantly improving it. The main shortcoming is the time it takes to connect to the Sonos network. It can take 5-10 seconds to connect which is annoying, oh, and you must remember to be connected to your local network (so turn the Wi-Fi on).Otherwise, Phone works fine and is worth the $4.99. The Android app is better, but you take what you can get.
Question:	if i buy a sonos 3, have wi-fi in my house, and a pandora account I need nothing else to play music? no bridge, no connectors, no nothing
Answer:	Christina is correct. The bridge is small and everything is easy to set up. I will say, in my opinion the Sonos 5 has superior sound quality, but the 3 is certainly adequate. I have 2 5's and one 3. After purchasing the first one with the bridge, adding the other two was as easy as plugging them in and then following the simple software instructions to add them to the group. I play from my Pandora account and also a number of radio stations. Good luck, enjoy!
Question:	can you plug into this device in addition to it being wireless? does it have an audio port
Answer:	There are no line-in jacks on the Play:3. There's an ethernet port, but that's all.

Product features

Stereo sound.

Even if you’re not an all-out audiophile, you still deserve great sound. Play:3 delivers, in stereo. Three Class-D amplifiers and three custom-built drivers create a full, wide sound stage so the instruments and vocals really shine. There’s also a bass radiator to pump out the lows.

Multiple orientations.

Stand it tall or set it on its side. Either way, Play:3 automatically optimizes the sound. When it's horizontal, it's in stereo. When it's vertical, it's in mono. The rubber feet on two sides make it safe for any surface.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Copper and stainless components
• Lifetime warranty for residential use
• Save up to 60% on your water heating costs with the most advanced, self modulating technology available
• Never run out of hot water with an ECOSMART tankless water heater.

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature.
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter.
Question:	What is the power consumption of this tank-less heater
Answer:	The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly
Question:	remote
Answer:	This unit does not have the ability to have a remote temperature control.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Eco Smart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why Eco Smart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self-modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home.Take a look at our full line of tankless water heaters below to see what's perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!. Required Wire: 4 x 8 AWG

From the Manufacturer

Ecosmart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why EcoSmart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home. Take a look at our full line of tankless water heaters below to see whats perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!

• Sleek and compact design with digital output temperature display
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• Manufactured in United States
• Pipe Fittings:3/4 inch NPT
• Required Breaker:4 x 40 A
• 150 A

User questions & answers

Question:	What model is recommended for whole house
Answer:
Question:	I live in lower michigan and what model is recommended for whole house
Answer:
Question:	Why are these so much less expensive than other name brand tankless heaters
Answer:
Question:	Even with 200 amp. My lights flicker with the water is in use. Any one having the same issue and how was the issue resolved? Thanks
Answer:

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

3/4 IPS LEAD FREE ISOLATOR EXP E2 w/LEAD FREE PRESSURE RELIEF VALVE TANKLESS WATER HEATER SERVICE VALVES - HOT & COLD SET - FULL PORT BRASS BALL VALVES w/ADJUSTABLE PACKING GLAND, HI-FLOW HOSE DRAINS (500 WOG) & PRESSURE RELIEF VALVE (150 PSI/200K BTU)

From the Manufacturer

Hot and cold set of full port forged brass ball valves with hi-flow hose drains and pressure relief valve outlet.

• Lead Free - Meets all federal & state standards for lead levels in drinking water system components.
• Size is 3/4in
• Tankless Water Heater Service Valves
• 1 per carton - 10 per case - Individually Priced & Sold
• Includes a residential pressure relief valve (150 PSI/200,000 BTU)
• 500 WOG
• 4444 series - IPS Union x IPS

User questions & answers

Question:	Hi. is this compatible with ecosmart tankless models
Answer:	The box come with controler and water valve kit. It is perfect.
Question:	Will this work with a noritz nrc661-dv-ng tankless water heater? thank you
Answer:	No it should NOT be installed in a garage. That is considered indoors. An outdoor model needs to be mounted outside to exhaust.
Question:	Hi, the valve kit needs Male NPT thread at both ends, is it right ? Thanks
Answer:	I do not believe so because they are different model numbers.
Question:	What is the difference between this one and RTG20220AB? Can I buy this instead of RTG20220AB
Answer:	I do not have recirculation setup yet. I believe this unit comes with the control functionality for recirculating but that you still need to install your own pump inline with the return water line.

Product description

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 1 point of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3. 0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1. 5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

• The 220V ECO 11kW unit is ideal for 1 simultaneous points of use in US Southern Regions where the incoming water temperature is above 70°F. In colder regions, it is suitable for a sink at 1. 3 GPM.
• German-designed with high quality stainless steel water channel and heating chamber.
• SMART Technology: Easy management and simple adjustments on a LCD Panel allows you to program the exact desired water temperature thereby optimizing electricity consumption.
• Requires 60 Amp breaker and must be installed by a professional plumber or electrician to ensure safety and quality.
• Marey’s ECO line can maintain 98% efficiency level throughout their lifetime.

User questions & answers

Question:	How to instal it
Answer:	Hello Domingo. Complete installation instructions are on the official manufacturer's owner's manual here https://gadgetsgo.com/images-manual/Marey-Eco110-2016_12_27_manual.pdf GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	What is the fitting for the pvc inlet and outlet
Answer:	Hi Judy. PVC should not be used for the hot water connection. Instead use copper, CPVC, or other high-temperature rated pipe. You may use PVC for the cold water connection. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	can i use a double 25 amp *50 amps
Answer:	I think it takes a 60 amp
Question:	What size is the out put line
Answer:	Hello Cindy. Both water inlet and outlet connections are 1/2" NPT. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo