14 best rheem water heaters

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°

• External digital thermostatic control with LED display (+/1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper immersion two heating elements, field Serviceable. Flow Rate- up to 4.4 GPM
• Simple installation – bottom 3/4 inch NPT water connections
• Threaded for easy replacement, simple installation, digital temperature display

User questions & answers

Question:	Can this be used in a recirculating system
Answer:	No where on the box does it say contains copper. Box reads.... 100% nonstick surface - hand washable and dishwasher safe- PFOAF Free, PTFE- fiberglass coating, safe up to 500 degrees, FDA approved. We are happy with our purchase.
Question:	How many amps
Answer:	Of course it can.
Question:	how many breakers and what amp
Answer:	No
Question:	will this supply two showers, washer and dishwasher for two people? (1000 sf house
Answer:	Made in China

Product description

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

• External adjustable digital thermostatic control with LED display (+/1 degree accuracy
• Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
• Simple installation – 1/2 NPT adapters included; side 1/2 inch Compression water connections
• 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
• Threaded for easy replacement, simple installation, digital temperature display 54 A. 13kW Model Flow Rate: up to 3.17 GPM
• 54 A

User questions & answers

Question:	We have a 500sq' apt. 1 kitchen sink, 1 lav sink and tub/shower. This tankless heats water to both sinks but nothing to the tub/sh. Help
Answer:	Sinks have aerators to slow down the water where a tub doesn't. It sounds like one possibility is that your exceeding the GPM for this heater. Next possibility, double check an measure your actually getting at least 240v at the heater, I had an issue where my unit was only getting 235v an it was causing a similar issue where only one of the two heating elements was activating. I had it set to 125F but it was coming out 100F. It was warm and without a meter I would of thought it was working correctly until I tried filling a tub. It couldn't even get the water warm. I pulled my wires out an restripped an cut an screwed them in an it fixed my problem, now its measuring around 245v. Make sure there is no copper showing after screwing down your input wires. Now filling the tub I noticed after about 10-15 seconds the water gets too hot to touch. I set it to 135F.
Question:	Do these tankless water heaters require an overflow line to the outside of the home or a pan like is required on normal water heaters
Answer:	No tank, so, no overflow line required. It mounts on the wall. A pan is needed if required by building code in your city.
Question:	what are the wiring and power requirements
Answer:	good morning,60 amp breaker and , number 6 cable !thank you have a great day!
Question:	How many amps are needed for rheem rtex - 13 240v heating tankless electric water heater
Answer:	Hello-The RTEX-13 requires 1x 60A@240V breaker / 6 AWG recommended wire size.Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=Specification-Sheet&id=fc3235b7-7cd0-42cd-93bc-7169ea92be31 Rheem 800-432-8373I hope this helped :)Ben

Product features

About Us

Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925. While the company has produced a number of products in its nearly 100 years of operation, Rheem is currently the manufacturer that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is one of the largest manufacturer of water heating products in North America.

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°

• ON/OFF Dial Control with adjustable digital temperature display
• Self-modulating power control
• 8kW Model Flow Rate: up to 1.95 GPM
• Side 1/2" NPT water connections
• On demand; continous hot water

User questions & answers

Question:	Cuantos kw,tiene por favor gracias
Answer:	8kw, 33amps, 240volts, one 40amp breaker needed, 8 AWG wire needed
Question:	Will this work for a 50 amp RV Motorhome that is connected to shore power and or using generator for power
Answer:	It calls for a 38amp breaker and needs a heaver gage wire than what might be in your RV Runing a 50 amp service with the w heater in service as soon as the AC or your stove cut on you will trip your service breaker Good thought I also have a fith wheel and a sports cruiser boat with 50 amp service and generators If you ran just the water heater by it self when you needed hot water you could make it work
Question:	I have 100 amp in my building. will that work
Answer:	Hello Manuela, This unit requires 240 volts and a 40 amp breaker accordingly. You should confer with you electrician to determine if there is room in your panel. Additionally, you can contact Rheem's technical support at 800-432-8373. Best Regards, Steve
Question:	Specs say #8 wire... i have #10 wire already installed. bathroom sink will never run for more then a minute or 2. will #10 wire be ok
Answer:	I am an Electrician. #10 copper is only rated for 30 amps. No matter how long you plan to run the sink for, it is not advised to use undersized wire, as it is a life and safety hazard.

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°

• ON/OFF Dial Control with adjustable digital temperature display
• Self-modulating power control
• 24kW Model Flow Rate: up to 5.9 GPM for RTEX-24
• Bottom 3/4" NPT water connections
• On demand, consistent and continuous hot water

User questions & answers

Question:	Can this directly replace a 40 gal tank heater with a 30A double pole breaker? What are power requrements
Answer:	No it can't. RTEX-24 requires 3 sets of wire and ground, and it needs 3x 40amp breaker. That's a total of 120amps
Question:	Can you use the 10/3 for one of the cicuits
Answer:	No. It requires three legs of 8-2.
Question:	Can the unit operate as a rtex-18 if i only hook up 2 of the elements? because i only need the 18 specs as of now but would like the option to upgrade
Answer:	Actually you can do this but you must be careful on which circuits are connected. Rheem says the elements are activated from right to left as power is required. The right most element connection also provides power to the control so this must always be connected. If the very left element is left disconnected, you will only get 2/3 of the rated power on a 3 element unit.
Question:	Why are 2 answers for the breaker requirements. Is it 3 double 40 or 3 double 60 amp
Answer:	If the unit draws 40 amp. you need a 2 pole 40 amp breaker 2 #8 wires good for 40 amp and 1 # 10 wire for a bond. Now if the unit draws 60 amps you need 2 # 6's good for 65 amps. A 2 pole 60 amp breaker and 1 # 8 for a bond( ground wire).

Product features

Rheem 240V 3 Heating Chambers RTEX-24 Residential Tankless Water Heater

Professional Classic tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications.

Performance Features

• On demand, continuous hot water
• Compact and stylish with digital temperature control in increments of 1°F ranging from 80°F to 140°F
• 99.8% Energy efficient
• Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement
• Simple Installation
• Digital temperature display

Applications

• Standard Hand Sink – 0.5 GPM
• Washing Machine – 1 to 1.5 GPM
• Kitchen Sink – 1 to 2 GPM
• Dishwasher – 1 to 2 GPM
• Water-Saver Shower Head – 1.5 GPM
• Standard Shower Head – 2.0 GPM
• Bath Tub – = 4 GPM
• Whole-Home – up to 6 GPM

Average Gallons Per Minute (GPM) based on 2010 Plumbing Standards.

Unique Features

• External Digital Thermostatic Control with LED display (+/- 1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper Immersion three heating elements, field serviceable
• Simple Installation – Bottom 3/4"NPT water connections

Product description

Rheem SP20060 Electric Water Heater Tune-Up Kit

From the Manufacturer

Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.

• Sp20060
• Repair Kit
• Plumber'S Pack
• Brand Name: Rheem

User questions & answers

Question:	will these elements fit Rheem Mod# 72v-52-2 Water Heater
Answer:	These elements did fit and worked well.
Question:	I have an older (17 year old) Whirlpool 50 gallon water heater, will this work, even though its a Rheem
Answer:	It will work. Make sure you clean your old one out. Read up on YouTube how to. You’ll get better life out of your water heater and heating elements.
Question:	Will this fit a Rheem 40gal 70-40s its about 25yo
Answer:	hot water tanks haven't changed for thermostats etc in more than 40 years so would think your ok
Question:	Richmond is manufactured by Rheem. Will this fit a Richmond 6e
Answer:	All these parts were identical to the parts I removed from my twelve year old GE water heater (further research indicated it was actually a Rheem). I swapped out the old parts and replaced them with these parts. The water heater now works as if new. I might note that these heating elements also look identical to similar generic items at Home Depot. I doubt they would stock it unless it fit just about everything.

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Simple installation and digital temperature display.

• Compact and stylish with digital temperature control in increments of 1f ranging from 80f to 140f
• RTEX04 and RTEX06 only show output temperature and are non thermostatically controlled

User questions & answers

Question:	Is this made in China
Answer:	I do not believe Rheem products are made in china but rather in the southern United States. It is always my intent to buy American.
Question:	Where are these made
Answer:	It doesn't matter because this unit is junk. Do not buy this system. And be sure to get a 230 volt system if you are going this route for a tankless heater. I have this unit in a cottage for a kitchen sink and it doesn't heat water over 68 degrees F.
Question:	Will this handle a shower and a sink
Answer:	The answer depends on two things how cold your incoming water is and if you plan to use both at the same time! I purchased this for an outdoor sink with an incoming water temp of 50 and the water wouldn’t heat past 90 degrees, check the specs before you buy you’ll definitely want warmer water for showering this particular one I believe will only climb 40 degrees +\-
Question:	will this unit be ok for a washer only
Answer:	NO... 105° is the hottest it gets. That is at a half gallon per minute. It is warm @ best! That's a little more than a wrinkle of water. Imagine filling a gallon jug in 2 minutes.

Product description

Rheem Prestige® RTGH-95DVLN-2 is a high efficiency condensing indoor natural gas tankless water heater designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of .26GPM and minimum activation flow rate of .40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and EcoNet enabled mobile app feature (additional kit available), buying the Rheem Prestige tankless water heater makes perfect sense. New 2” venting with band connections allow up to 150’ with a 3” PVC or 60’ with a 2” PVC pipe. Included are also a built-in condensate neutralizer, digital remote control and 10ft. of thermostat wire. Can be used with up to 5 bathrooms depending on inlet temperature; .93UEF (.96EF Canada), 199,000BTU efficiency. Professional installation is required otherwise warranty void. Warranty: 12yr heat exchanger, 5 yr parts and 1 yr labor.

• Exclusive Water Savings technology conserving up to 1, 100 gallons per year
• 199, 900 BTU (gas consumed per hour)
• Exclusive Hot Start Programming minimizes cold water burst by staying in ready-fire state
• Recirculation pump ready kit ready
• For use indoor only

User questions & answers

Question:	Whats the difference between this and the rtgh-95dveln
Answer:	I think the devln has wifi capabilities.
Question:	Can I run 2 units in tandem and will the controller talk to each other
Answer:	Hello- Yes. You can connect 2 alike units using an RTG20040 EZ Link cable. Thanks :) Ben
Question:	Is the thermostat included
Answer:	Yes, a thermostat is included.
Question:	Whats the between this and the difference rtgh-95dvln
Answer:	Hello- The main difference was an upgraded fan, which in turn, allowed them to downsize the vent ports from 3" down to 2". So both of the connections on top for intake air/exhaust are now ran in 2" For more info, please call Rheem at 800-432-8373 Thanks Ben

Product description

Rheem RTG-70DVLN-1 is a mid-efficiency indoor natural gas tankless water heater designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of .26GPM and minimum activation flow rate of .40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and EcoNet enabled mobile app feature (additional kit available), buying the Rheem RTG tankless water heater makes perfect sense. Included are a digital remote control and 10ft. of thermostat wire. Best if used with up to 3 bathrooms; .81-.82UEF (.82EF Canada), 160,000BTU efficiency. Professional installation is required otherwise warranty void. Warranty: 12yr heat exchanger, 5 yr parts and 1 yr labor.

• Exclusive Water Savings technology conserving up to 1, 100 gallons per year
• 160, 000 BTU (gas consumed per hour)
• Exclusive Hot Start Programming minimizes cold water burst by staying in ready-fire state
• Recirculation pump ready kit ready
• For use indoor only

User questions & answers

Question:	is this propane
Answer:	The N in the model notates this unit using natural gas. The propane version is as follows RTG-70DVLP-1.
Question:	will a 4 inch vent pipe work...will a 1/2" gas feed pipe work
Answer:	A 3"/5" concentric vent is needed. 1/2" will suffice if close to supply of has.

Product description

Professional classic tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

• External digital thermostatic control with LED display (+/1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper immersion four heating elements, field Serviceable
• Simple installation – bottom 3/4 inch NPT water connections
• Threaded for easy replacement, simple installation, digital temperature display.Amperage:150 amps.A max flow of 8.0 GPM

User questions & answers

Question:	What is it gpm
Answer:	The Rheem RTEX-36 (240V) will provide 2.5 GPM at a 98 degree F temperature rise and 6 GPM at a 30 degree F temperature rise. Please contact Rheem technical support at 800-432-8373 for further information.
Question:	will this work to fill a garden tub
Answer:	Hello- That should be large enough to fill a garden tub with no problem. I would definately look at, and make sure the electrical requirements can be met ( which are quite large for that unit ) For help sizing - call Rheem - 800-432-8373 Thanks Ben
Question:	Is it good enough for a single family home of 3 bathrooms, dishwasher, washing machine
Answer:	Yes; I have 4 bathrooms, dishwasher and washing machine. Generally, I only run two at a time - washer and dishwasher or washer and one shower.
Question:	Will this unit modulate the power to meet the demand
Answer:	I don’t understand the question but it meets my demand and I have 4 bathrooms.

Product description

Rheem Prestige® RTGH-95XLN-2 is a high efficiency condensing outdoor natural gas tankless water heater designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of .26GPM and minimum activation flow rate of .40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and EcoNet enabled mobile app feature (additional kit available), buying the Rheem Prestige tankless water heater makes perfect sense. Included are also a built-in condensate neutralizer, digital remote control and 10ft. of thermostat wire. As this unit is meant for use outdoors, venting is not required. Can be used with up to 5 bathrooms depending on inlet temperature; .93UEF (.96EF Canada), 199,000BTU efficiency. Professional installation is required otherwise warranty void. Warranty: 12yr heat exchanger, 5 yr parts and 1 yr labor.

• Exclusive Water Savings technology conserving up to 1, 100 gallons per year
• 199, 900 BTU (gas consumed per hour)
• Exclusive Hot Start Programming minimizes cold water burst by staying in ready-fire state
• Recirculation pump ready kit ready
• For use outdoors with freeze protection up to -30 degrees

Product description

Next Generation Burner Technology Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate UMC-117 remote control and 10 ft. of thermostat wire is included EZ-Lint cable available for high demand applications to connect two thankless units to operate as one Manifold up to 6 units with an optional MIC-6 manifold control board Exclusive! All Rheum models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly High-altitude capability - up to 9,840 ft. elevation above sea level (no chip required) Exclusive! Guardian OFWTM overheat film wrap All Rheum thankless models are third-party efficiency certified by GAMA Continuous hot water, energy saving and compact, space saving design Intelligent electronic controls designed to increase energy efficiency and safety Self Diagnostic System Digital display shows temperature setting and maintenance codes.

From the Manufacturer

Next Generation Burner Technology Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate UMC-117 remote control and 10 ft. of thermostat wire is included EZ-LinkTM cable available for high demand applications to connect two tankless units to operate as one Manifold up to 6 units with an optional MIC-6 manifold control board Exclusive! All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly High-altitude capability - up to 9,840 ft. elevation above sea level (no chip required) Exclusive! Guardian OFWTM overheat film wrap All Rheem tankless models are third-party efficiency certified by GAMA Continuous hot water, energy saving and compact, space saving design Intelligent electronic controls designed to increase energy efficiency and safety Self Diagnostic System Digital display shows temperature setting and maintenance codes

• Built-in electric blower Supplied with a 120 volt power cord
• Environmentally friendly Low Knox burner meets SCAQMD rule 1146 requirements
• Freeze protection to -30 Degree F

User questions & answers

Question:	Gallons per minute this unit produces
Answer:	I believe mine is 9 gallons per minute. It serves a full bath and a 3/4 bath and has never run out of water.
Question:	How hot can the water get from this unit. I want to run a washer that needs 160 degree water. Will this get this hot
Answer:	Rheem Unit Rec temperature is 120 degrees & maxes out at 140 degrees. So this unit will not meet your requirements.
Question:	Is this unit need electricity
Answer:	Yes. The ignition and internal controller require electricity. The heat is provided by the gas, however.
Question:	Does this model have a battery back-up (electronic ignition) system for when the power goes out
Answer:	Buy a UPS backup and plug this unit into it instead. You can read how much this unit draws when running and figure out much run time you would get from the UPS back up you purchased. I'd imagine any UPS (Uninterrupted Power Supply) backup purchased over a $100 should easily get you an hour or two of continuous use if it's just the blower that's requiring power. A UPS will recharge itself when power is back on so it's really a place and forget solution. You should change the battery in the UPS once a year but check individual UPS backup unit recommendations. This one seems geared for Tankless Water Heaters and other gas appliances and says it should last for 7 days of normal operation -> https://www.amazon.com/HUGO-Battery-Tankless-Heaters-Appliances/dp/B00VQHUKTM/ref=sr_1_2_sspa?crid=1FVBRMYF9L2L7&keywords=ups+battery+backup+for+tankless+water+heater&qid=1575626757&sprefix=UPS+%2Caps%2C210&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzNFRLTDZDRzZOWjNOJmVuY3J5cHRlZElkPUEwOTIzNzEzM0dIN0VFQ1o3SDdRMyZlbmNyeXB0ZWRBZElkPUEwNTQ2NzAxSFM2Mk8zVEwzWFk0JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Product description

Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.

From the Manufacturer

Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.

• For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
• Watt Density Classification: MWD, Input Voltage (V): 208, Input Voltage (V): 240, Wattage at 208V (W): 4130
• Watt Density at 208V (W/sq. in.): 85, Wattage at 240V (W): 5500, Watt Density at 240V (W/sq. in. ): 113, Cold Resistance (ohms): 10.50
• Element Diameter (in.): .316, Element Length - Flange to Tip (in.): 13.47, Mounting Type: Threaded, Actual Thread Size - Outside Diameter(in.): 1-9/32
• Thread Type Series Designation: NPSM, Configuration: Fold back, Nominal Thread Size - (in.): 1, Threads per Inch: 11-1/2

User questions & answers

Question:	Will this work for a Rheem model # RH0707238383 water heater
Answer:	Hi ,yes this unit can be mounted in an attic. Here are the dimensions : 27.5 x 16.5 x 9 inches ,please measure the dimension from your attic before you order.
Question:	Will this fit Reem performance plus 50 gal. Tank
Answer:	Hi ,the max BTU is 150,000 and the min BTU is 24,000 per/hour.
Question:	Will this fit a Rheem 61v40s
Answer:	not even 1 amp
Question:	Is the base of this element stainless steel, or is it just the element that's stainless? I want to avoid a rusty base
Answer:	No filter needed.

Product description

Rheem AM402771 Water Heater Burner Assembly

• Burner Assembly

User questions & answers

Question:	Is this for propane or natural has
Answer:	As long as its operational it has an "anti-freeze" and it will kick on to warm the pipes within the unit only it won't cycle all of your system and keep it from freezing if your basement isn't heated but it will protect itself if you leave it on See the owners manual on their web site
Question:	The part number on the face plate is AS39841,will this part work for the Rheem hot water heater
Answer:	No. 12volt ignition only. Propane for heat!
Question:	Can i put it on rheem classis seris, model no: prog40-38u rh62 gas water heater? if not can you please to me the correct one
Answer:	Yes it can. The heater is equipped with an anti-icing feature built into the control software and a flow control valve to maintain adequate outlet water temps. We just finished up a three week stay at Yosemite with some heavy snow and subfreezing temps. As long as you have 12vdc and propane you should be fine.....and a heated water supply hose, of course. Obviously, if you will be storing in freezing temps you'll need to winterize to prevent damage to your heater and water system.
Question:	The rheem part number i am looking for is am42073, the only thing on amazon that looks identical to what i need is am40277-1. will this work
Answer:	For anyone else asking this question, look on Gerard’s website. There is a downloadable document that shows and explains the door types. If you currently have a 6 gallon tank heater, there are two sizes. If you currently have a 10 gallon tank heater, there is only one door type.

Product description

Rheem/PROTECH Water Heater Pilot Assembly for select natural gas water heaters. Key Words: Rheem PROTECH Water Heater Service Part Pilot Assembly

From the Manufacturer

Rheem’s PROTECH brand Pilot Assembly kit includes: Pilot Assembly, Burner Door Gasket, Screws, Tinnerman Clips and Instructions

• PROTECH is Rheem's OEM (original equipment manufacturer) brand for Rheem Factory Authorized Parts.
• Rheem/PROTECH Water Heater Pilot Assembly for select natural gas water heaters
• Kit Includes: Pilot Assembly, Burner Door Gasket, Screws, Tinnerman Clips and Instructions
• Ensures safe and reliable operation
• Torx screw driver not included

User questions & answers

Question:	Will this part work on a Rheem 41V50 water heater
Answer:	only allow a professional to install the pilot is very specific to model
Question:	Is this work with model prog38-38u rh62? thanks
Answer:	I believe so, but it is best to check with the manufacturer.
Question:	The question was never definitively answered. I also have the LP model of this water heater. Will this pilot assembly work with LP gas
Answer:	No
Question:	Will this work for a rheem fury model 22v40f
Answer:	yes it does. its the replacement for rheem part for the 22v40f1