12 best premier natural gas water heaters
Premier Natural Gas Water Heaters are a type of water heating system designed to provide hot water for residential and commercial use. These water heaters are powered by natural gas, which is a cost-effective and efficient fuel source for heating water. Here are some key points about Premier Natural Gas Water Heaters:
Efficiency: Natural gas water heaters are known for their high efficiency, which means they can heat water quickly and cost-effectively. This can lead to lower energy bills compared to electric water heaters.
Capacity: Premier Natural Gas Water Heaters come in various sizes and capacities to meet the hot water demands of different households. They are available in both tankless and tank-style models.
Tankless vs.Tank-style: Tankless natural gas water heaters heat water on demand, providing an endless supply of hot water without the need for a storage tank. Tank-style water heaters store and heat a specific amount of water in a tank, which is then released when needed.
Venting Options: Proper venting is essential for the safe operation of natural gas water heaters. They can be vented through a chimney or using a direct venting system, depending on the model and installation requirements.
Energy Efficiency Ratings: Look for energy efficiency ratings, such as the Energy Factor (EF), when choosing a Premier Natural Gas Water Heater. Higher EF ratings indicate greater energy efficiency.
Safety Features: These water heaters are equipped with safety features like a pressure relief valve and a thermostat to control water temperature and prevent overheating.
Installation: Installation of a natural gas water heater should be done by a qualified technician to ensure safety and compliance with local building codes. Proper maintenance is also essential to extend the lifespan of the unit.
Cost: The initial cost of a Premier Natural Gas Water Heater may be higher than that of an electric unit, but the lower operating costs over time can offset this expense.
Environmental Considerations: Natural gas is a fossil fuel, and the environmental impact of its use should be considered. Some units may have low NOx (nitrogen oxide) emissions to reduce their environmental footprint.
Warranty: Check the manufacturer's warranty when purchasing a Premier Natural Gas Water Heater. It's essential to understand the coverage and duration of the warranty for peace of mind.
In summary, Premier Natural Gas Water Heaters are a reliable and efficient option for providing hot water in homes and businesses. They offer various sizes and models to suit different needs, but proper installation and maintenance are crucial for their safe and efficient operation.
Below you can find our editor's choice of the best premier natural gas water heaters on the market
Premier Plus 100094001 Natural Gas Water Heater Burner Assembly for Series 100 132267
PREMIER PLUS
Product description
PREMIER PLUS NATURAL GAS WATER HEATER BURNER ASSEMBLY FOR MODEL BFG 50T40 OR SERIES 100. Can also be used on equivalent American & U.S. Craft master brands Series 100 units. The product is manufactured in United States.
- Fits 50 gallon 40,000 BTU tall natural gas model #BFG 50T40 only
- Can also be used on equivalent American & U.S. Craftmaster brands Series 100 units.
- OEM replacement burner assembly for the Series 100 Premier Plus residential natural gas water heater
User questions & answers
| Question: | Will this fit a water heater that is 20 inches in diameter |
| Answer: | no |
| Question: | Looking to use this on a kenmore 50 gal 40,000 btu model number 153.331882 serial 1143A000820 and only really need the flame spreader part will it wrk |
| Answer: | No, not without modification and that's a no no. |
Premier Plus 6911154 NAT Gas Water Heater Burner Assembly for Series 100
PREMIER PLUS
Product description
PREMIER PLUS NATURAL GAS WATER HEATER BURNER ASSEMBLY FOR MODEL BFG 40T40 OR SERIES 100. Can also be used on equivalent American & U.S. Craft master brands Series 100 units. The product is manufactured in United States.
User questions & answers
| Question: | Does this work with 40 gallon whirlpool |
| Answer: | The water runs through a hot water tank. I doubt it would work just for filtered water. |
| Question: | Does this fit a Whirlpool N30T61-303 gas water heater |
| Answer: | I have it set to the last "dot" before max, and an instant read thermometer reads 175-177 for water directly from the tap (into a mug). For comparison, I tested coffee that just finishing brewing, and that was about 172-175. |
| Question: | Will this fit 15333116611? Looks like the same burner |
| Answer: | I thought the door was what I ordered but you get the whole insert as well as the door. |
| Question: | Is this a complete assembly? Does it come with thermopile and all new lines as it shows in the picture |
| Answer: | Fits my 12 perfectly insets. |
PREMIER PLUS 6911165 132266 Plus Natural Gas Water Heater Burner Assembly For Model Bfg 40S40 Or Series 100
PREMIER PLUS
Product description
Premier Plus natural gas water heater burner assembly for 6911165 bfg 40s40 or series 100. Can also be used on equivalent American & U.S. Craft master brands series 100 units. The product is manufactured in United States.
- Premier plus natural gas water heater burner assembly for 6911165 bfg 40s40 or series 100
- Can also be used on equivalent American & U.S. Craft master brands series 100 units
- The product is manufactured in United states
User questions & answers
| Question: | Is this Stamped 14” on its face |
| Answer: | Yes, someone will need to drill thru your counter. |
| Question: | Will this work on a whirlpool N50T |
| Answer: | We had installed a reverse osmosis system, so the RO 'room temperature' system feeds into this device, which then heats the water in the tank for instant hot out of the dispenser.. LOVE IT! Can't imagine being without it! If/when it goes down, I'd replace it immediately. (We did buy a different dispenser, a dual one with hot and cold, both from the RO filtered water.) |
| Question: | Will this work on a whirlpool N50T |
| Answer: | O sea, buscas el tubo de salida de agua? Buscaria en e-Bay, a la mejor encuentras la pieza o mecanismo completo a mejor precio. Los mecanismos duran mucho, pero mi tubo de salida se rompió despues de 19 anos de servicio. |
| Question: | will this work on whirlpool N40T |
| Answer: | I have had the same problem. It was in the faucet. The on off lever does not turn off flow but the tank was OK. I assume all you need is to replace the faucet which should be available without a new tank. |
PREMIER PLUS Water Heater T Stat NAT, Up to 50 Gal
PREMIER PLUS
Product description
| OEM Replacement For Premier plus BFG Models | Right Hand Universal Thermocouple Thread | Natural Gas Fits Up To 50 Gal Units - Manufacturer: Premier Plus - Country of Manufacture: United States - Manufacturer Part Number: 6910794.
- Premier Plus Water Heater T Stat Nat, Up To 50 Gal
- Manufacturer: Premier Plus
- Manufacturer Part Number: 6910794
User questions & answers
| Question: | Will this replace model 37C73U |
| Answer: | Hi there, We offer a 30-day money back and a 1 year. Please feel free to vontact us via , if you have any questions, we promise to reply within 24 hours. |
| Question: | Will this work in a Reliance 501 water heater |
| Answer: | It does boil the water, but I've been putting drinkable water anyway. |
| Question: | will this replace the old robert shaw r110ratsplc |
| Answer: | Hello! This is a faucet and tank bundle. You just need to get the colder fitting part number: 43103C to connect the blue tube of the faucet to the tank from Carroll Parts at 1-800-654-3545 and you are all set. |
| Question: | Will this work on a whirlpool bfg1f4034t3nov |
| Answer: | This model is only available in a chrome or satin nickel. |
Premier Plus GIDDS-132260 Natural Gas Water Heater Pilot Assembly for Series 100-132260
PREMIER PLUS
Product description
OEM replacement pilot assembly for the Series 100 Premier Plus residential natural gas water heaters used on models with 30 gallons tanks through 50 gallon tanks. Can also be used on equivalent American & U.S. Craft master brands Series 100 units. - Manufacturer: Premier Plus
AMERICAN WATER HEATER GIDDS-110577 Replacement Gas Valve Natural Gas 1" Insulation
American Water Heater
Product description
OEM replacement gas valve for the Series 100 Premier Plus residential natural gas water heaters used on models with 30 gallons tanks through 50 gallon tanks. Can also be used on equivalent American & U.S. Craft master brands Series 100 units. Made to fit on units with 1" insulation. Gas valve made by Honeywell. - Manufacturer: American Water Heater
User questions & answers
| Question: | Is this replacement acceptable for u.s. craftmaster bfg1f4034t3nov |
| Answer: | No |
| Question: | Does this unit require an external source of electricity |
| Answer: | Yes. My kitchen sink is 50 feet from heater and water is hot on arrival at full flow. Prior to replacement my previous unit had one side failed. With only one element it provided warm enough water to bathrooms at 30 feet but only managed warmer water to kitchen if run at low volume. |
| Question: | would this replace honeywell wv8860b |
| Answer: | HI, this S7133 Instant water boiler is a instant warmer, it doesn't have the keep warm function. All the water coming out of this dispenser is freshly cooked. |
| Question: | will this work for model wv8840b |
| Answer: | Hi, normally boiling temperature is 100°C, small cup is about 80 seconds and big cup is about 95 seconds, there might be tolerance in different weather. Any further concerns, please feel free to contact Seller for help directly. |
AMERICAN WATER HEATER GIDDS-110578 Honeywell Replacement Gas Valve Natural Gas 2" Insulation
American Water Heater
Product description
OEM replacement gas valve for the Series 100 Premier Plus residential natural gas water heaters used on models with 30 gallons tanks through 50 gallon tanks. Can also be used on equivalent American & U.S. Craft master brands Series 100 units. Made to fit on units with 2" insulation. Gas valve made by Honeywell. - Manufacturer: American Water Heater
User questions & answers
| Question: | would this replace honeywell wv8860b |
| Answer: | I don't know/ But we had to check with a parts dealer to get the right one. |
Robertshaw 110-326 Water Heater Thermostat with 1-3/8" Shank, Natural Gas, 3-1/2" W.C
Robertshaw
Product description
3-1/2" W.C. Natural Gas 160°F 1-3/8" Shank Length 1/2" Fnpt Inlet X 1/2" Inv. Fl Outlet Replaces Model #R110Rts - Manufacturer: Robertshaw.
- Robertshaw Water Heater Thermostat With 1-3/8 In. Shank, 3-1/2 In. W.C., Natural Gas
- Robertshaw
- 110-326
User questions & answers
| Question: | Will it replace the 66- 138 - 335 gas thermostat valve |
| Answer: | You wire in two hits to make 220/240. It needs to be on its own breaker. And at least 10/3 wire. If you don’t know what I’m talking about you probably need a handyman or an electrician. I’m not trying to be a smart aleck. These things work great by the way. |
| Question: | Will this work for my bradford white model # m430t6cx |
| Answer: | Yes it does there is a small black reset button on the top of the wh |
| Question: | does this replace suburban SW6P valve |
| Answer: | I takes 80 amps max for the water heater, a dryer takes 30, Stove takes 50, and so a 150 amp panel would do the job even with several appliances working. |
| Question: | Does this fit a bradford defender white water heater #m440T6FbN |
| Answer: | Hello Natividad. Yes, the EX190TC draws 80 amps, and is also the max amperage draw on the circuit. Here is the official manufacturer's spec sheet: https://gadgetsgo.com/images-manual/Eemax-Specs-Series-Two-TC.pdfGadgetsGo is an Authorized Eemax Dealer.Kind Regards,Ross KGadgetsGo |
Honeywell WT8840B1000 Water Heater Gas Control Valve, NAT 160 Degree F 1" Cavity
Honeywell Home
Product description
The Wt8840 Series Is The Water Heater Control For Trade Use to replace WV8840 valves on AO Smith water Heaters. It Is Designed For Use In Standing Pilot Applications Using An Immersion Well For Water Temperature Sensing. Made in United States. Manufactured by Honeywell.
User questions & answers
| Question: | Will this replace the wv8860c |
| Answer: | Short answer is difficult to tell. I ordered this valve as a replacement for our hot water heater. Was unable to get any support from Honeywell as to compatibility with existing. Threads were reverse from existing, spent $30 cutting off and replacing burner fitting, and unit still would not work. I was unable to return the unit as it had been fitted on the hot water heater to test it. It may well work for you but be sure that you can return it if it does not. |
| Question: | How many millivolts does this require |
| Answer: | 750 millivolts this control works with a thermopile not a thermocouple |
| Question: | will this replace the wv8840c |
| Answer: | THis is the model I need to replace, what did you find out?? |
| Question: | Will this replace a wv8840b |
| Answer: | Yes still working perfectly . |
A.O. Smith by Honeywell Gas Control Valve 100262939 2" Cavity Natural Thermostat Compatible with A.O. Smith, State, American, Whirlpool, and Craftmaster Brand Water Heaters
Variety Home Supply
Product description
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158
- PLEASE PROVIDE MODEL AND SERIAL NUMBER OF YOUR WATER HEATER IF YOU NEED US TO DETERMINE CORRECT GAS VALVE PART NUMBER!
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, American, Whirlpool and Craftmaster branded heaters
- Temperature control assembly 100262939 supplies the burner with gas to heat the water
- Temperature ratings: ambient-- 0 c to 60 c; tco limit-- 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
User questions & answers
| Question: | will this replace a 97c37u 601 for state select water heater |
| Answer: | Yes |
| Question: | Will this replace wv8840b1042 from state select water heater model#gs650ybrt 300, serial# 1133a |
| Answer: | The gas valve you need for this heater is actually the other one we sell. It is a 100112336. Thank you! |
| Question: | will this replace model grn 50 200 serial #1146t |
| Answer: | No, this will not work. You need a 100093971. Good luck! |
| Question: | Will it replace wv8840b |
| Answer: | Contact Variety Home Supply, "PROVIDE MODEL AND SERIAL NUMBER OF YOUR WATER HEATER SO THEY CAN DETERMINE CORRECT GAS VALVE PART NUMBER!" |
Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing Natural Gas
Product description
NATURAL GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE STANDARD 24" LENGTH FITS MANY WATER HEATERS ON THE MARKET WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT The 113884-01 Fits Desa, Reddy, All-Pro, Universal, NR, Sears, Remington and many other Propane Forced Air Heaters Fit Models: RLP55V, RLP125V, REM55PV, REM125PV, 85-FAC, 125-F, TB115, SPC-85, SPC125, BLP55V, WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
- NATURAL GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE
- STANDARD 24" LENGTH tubing replacement warrantee
- FITS MANY BUT NOT ALL WATER HEATERS ON THE MARKET.
- SYSTEM MUST BE CHECKED FOR LEAKS BEFORE OPERATION
- WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
User questions & answers
| Question: | will this fit a Whirlpool hot water heater model number N40T |
| Answer: | Yes Ect-52-210 |
| Question: | The mounting bracket shown is the exact mirror image of what I need. Are they made both ways |
| Answer: | Hello.Thank you for more information.This is wrong part for your heater. Correct part number is 9002859115.Please let us know if you have any other questions.Customer support team of PartzStop. |
| Question: | Will this work for bradford white u45036frn / bwu50r16 ? thanks |
| Answer: | Hello Brian. Here are two highlighted points stated in the manual: 1. The Power Pak Plus is not waterproof or rated for outdoor installation. It must be installed according to electrical building code and not exposed to excessive moisture or freezing temperatures. 2. This unit heats water by 41°F at a flow rate of 1.5 GPM (and a proportionately lower temperature rise with a higher flow rate, and higher temp. rise with lower flow rate). All tankless water heaters operate on the same principle. Therefore for example, when the incoming water temperature is 64°F or more, the output temperature will be at least 105°F at 1.5 GPM. (41 + 64 = 105. And 105°F is what many people feel is a comfortable shower or hand washing temperature.) Possible shower flow rates: 1.5 to 2.5 GPM. Then compare that GPM with the 41°F temperature increase at the different GPM possible rates to see if it will produce at least 105°F. This heater requires one 40 amp double pole breaker. If it will not get to 105°F at your incoming water temperature, and your needed shower flow rate, then choose another model with more kW and amps, and ensure that you can supply it with the required electrical capacity. This is a summary. For a more complete explanation of how to choose a tankless water heater, read our article at blog.gadgetsgo.com. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo |
| Question: | How thick is the tubing is the pilot feed tube |
| Answer: | not if running at the same time, also depends on the amount of gallons per minute your shower heads are, if they have water savers in them you might be able to get away with this |
American Water Heaters 6910810 Water Heater Pilot and Igniter Assembly Genuine Original Equipment Manufacturer (OEM) Part
Product description
Genuine Original Equipment Manufacturer (OEM) parts! This pilot and igniter assembly (part number 6910810) is for water heaters. Pilot and igniter assembly 6910810 supplies the flame for the burner to ignite the gas and includes the thermocouple. Turn the gas supply off to the water heater before installing this part. For American Water Heaters.
- This part is compatible with models including; FG1F4040S3PV,FG6250T504NOV,FG6140S403PV,FG6140S403NO,FG6140S403NOV,FG6150T504NOV,FG12240S403NOV,FG12250T504NOV,FG1H4040S3NOV,FG1F5050T4NOV,FG1J4040S3NOV,FG1F4040S3NOV
- Pilot and igniter assembly 6910810 supplies the flame for the burner to ignite the gas and includes the thermocouple
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: American Water Heaters
- This pilot and igniter assembly (part number 6910810) is for water heaters
- Turn the gas supply off to the water heater before installing this part
User questions & answers
| Question: | Is this ignighter for propane |
| Answer: | Yes it is just as you see. |
Latest Reviews
View all
Shoulder Compression Braces
- Updated: 14.05.2023
- Read reviews
Cube Speakers
- Updated: 26.06.2023
- Read reviews
Desktop Easels
- Updated: 09.05.2023
- Read reviews
Racquetball Dvds
- Updated: 23.07.2023
- Read reviews
Iron Supplement Brand
- Updated: 13.02.2023
- Read reviews