11 best bath tub diverter spout

Product description

Durable, reliable, quality engineering and construction. American standard products are designed for your busy lifestyle. Parts, hardware, and components are engineered to enhance the usage of your American standard products. About American standard brands great performance and great looks meet in our complete line of fixtures and faucets for bath and kitchen. Performance and reliability. Coordinated collections. Ingenious features. American standard is style that works better every day.

From the Manufacturer

This 4-inch slip-on diverter tub spout is designed for use with half-inch copper pipe and is constructed in durable brass. Shown in polished Chrome.

• For 1/2" copper water tube
• Metal construction
• Straightforward styling and sound construction.

User questions & answers

Question:	How long does the copper stub have to be (out from the wall)? I don't want to be extending it
Answer:	http://www.iqiyi.com/w_19rut9riml.html?spm=a2h0k.11417342.soresults.dtitle please refer to this install video. note: the Exterior of the lock is differetn, but the install is same to the lock you have bought.
Question:	How long does the pipe have to be coming out of the wall
Answer:	this is a lock, not have the controle function, so the exit button should wiring to the access control unit of special power supply.
Question:	does this install with an allen wrench
Answer:	The lock only works when the magnet has power to it. If you put a inline switch on the power feed, when the switch is off there will be no power to the magnet/lock and the lock will not hold the door .
Question:	Does this diverter slide run on a plastic bushing, to keep the slide from binding on hard water scale
Answer:	Dear Customer, If the system loses power, the door will become unlocked. If you want to it to stay locked, we recommend a back up battery. Below is the battery we recommend: https://www.amazon.com/Visionis-VIS-6001BB-channel-Battery-Backup/dp/B075NQLJHM/ref=sr_1_7?ie=UTF8&qid=1506450417&sr=8-7&keywords=vis-6001bb If you have any other question, dont hesitate to ask. Thank you,

Product features

American Standard Slip-On 4 Inch Diverter Tub Spout

Straightforward styling and sound construction. This diverter tub spout goes well with casual decor. This durable metal tub spout has a built-in diverter for use in a bath/shower system.

For 1/2" Copper Water Tube. Metal Construction.

Product description

This tub spout has a push and pull front diverter and an inside thread that connects to a 1/2 inch IPS. 5-1/4 inch total length. Front end threaded spout that can be used for a tub valve with a built in shower diverter. Metal construction stainless steel. Chrome finish.

• Tub spout with front push and pull diverter 1/2 inch IPS inside thread, 5-1/4" length replacement part.
• Front end threaded spout that can be used for a tub valve with a built in shower diverter
• The length of the pipe that is coming out from your wall should be 4" to 4-3/8" to avoid a gap between the wall and the edge of the spout.
• Durable metal construction stainless steel body
• Polished chrome finish offers an elegant appearance

User questions & answers

Question:	Will this fit a 4in copper pipe
Answer:	Thank you for your question. This is due to power supply. Please make sure you are using at least a 12v 1amp power supply.
Question:	is the threaded stub (connection) plastic or metal
Answer:	Not sure how you would put this at the bottom of a door ( you would step on it all the time ) but yes you could have two locks on one power supply . The lock draws 1/2 amp at 12v , so you would need a 1 amp supply to run 2 locks ( 3-5 amp supplies are pretty common and would be fine to use ) supply must be great or equal to demand , never less .
Question:	What is the physical measurement from the back wall mount surface to the internal threaded pipe entrance? I need a spout that has 3-5/8, or NG
Answer:	When the power goes off the mag lock unlocks. To overcome this a ups battery back up device must be connected to the mag locks so the lock stays on when power goes off.
Question:	How long should the pipe out of the wall be for this spout
Answer:	No it does not have a led.

Product description

LASCO Plumbing Specialties uses the LASCO-Simpatico brand for their residential plumbing products. This is a LASCO-Simpatico 82195SN Bath Tub Diverter Spout with Personal Shower Outlet, Fits 1/2 And 3/4 Iron Pipe, Satin Nickel. Bath Tub Diverter Spout, With 1/2-Inch Male Pipe Thread Personal Shower Hose Outlet, Spout Fits 3/4-Inch Female Pipe And 1/2-Inch Using Bushing, Satin Nickel. Satin nickel. Bath tub diverter spout. 3/4-Inch Female thread with 1/2-Inch bushing. With 1/2-Inch male pipe outlet. Personal shower hose connection.

From the Manufacturer

LASCO Plumbing Specialties uses the LASCO-Simpatico brand for their residential plumbing products. This is a LASCO-Simpatico 82195SN Bath Tub Diverter Spout with Personal Shower Outlet, Fits 1/2 And 3/4 Iron Pipe, Satin Nickel. Bath Tub Diverter Spout, With 1/2-Inch Male Pipe Thread Personal Shower Hose Outlet, Spout Fits 3/4-Inch Female Pipe And 1/2-Inch Using Bushing, Satin Nickel. Satin nickel. Bath tub diverter spout. 3/4-Inch Female thread with 1/2-Inch bushing. With 1/2-Inch male pipe outlet. Personal shower hose connection.

• Satin nickel
• Bath tub diverter spout
• 3/4-Inch Female thread with 1/2-Inch bushing
• With 1/2-Inch male pipe outlet
• Personal shower hose connection

User questions & answers

Question:	Are the guts of this tub spout made of metal or plastic
Answer:	Plastic. My plumber didn't want to use it and we went with another product

Product description

Top mount threaded outlet for use with hand held personal showers. 3/4" Female pipe thread inlet with 1/2" Female pipe thread bushing. Chrome- plated zinc. Carded. Size: 5-1/2" Finish: Chrome Diverter: Yes Material: Zinc Flow Rate: 6.103 GPM WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -

• Taiwan

User questions & answers

Question:	Will this fit onto a 3/4” male threaded pipe extending 4-1/4” from the wall
Answer:	Mine was 1/2 inch and 1 inch from. wall
Question:	I attach the hand held shower to the diverter but water spurts out at connection. How do I stop this
Answer:	Make sure you have inserted one of the rubber washers between the hose connect and the diverter.
Question:	is this cheap plastic or metal construction
Answer:	The diverted is metal (chrome plated zinc). Very tender so don’t get too rough with it. Make sure you don’t cross thread any connections.
Question:	is this inside or outside mount
Answer:	I'm not sure if your question. The shower diverter connection is on the top, back of the faucet as pictured.

Product description

Danco is one of the largest plumbing repair, replacement, and remodel suppliers in the home improvement industry focused largely on empowering 'Do-It-Yourself' consumers with plumbing solutions that are as practical as they are affordable, giving your home a more fresh appeal and renewed elegance. We provide stylish design-oriented innovative home solutions that are user-friendly to support and encourage customers to tackle home improvement tasks on their own - without the heavy price tag of professional services. Update your bathroom with the Danco Tub Spout with Diverter in Brushed Nickel. Replacing your dirty, dingy tub spout will help upgrade the look of your tub/shower and help prevent leaks. Old worn out tub spouts have a tenancy to erode and crack creating unwanted leaks. Updating your tub spout is not only simple and easy, but it is also a money saver. This tub spout is constructed from metal for strength and durability in your tub/shower. This tub spout comes complete with adapters, a wrench and Plumber's Tape for an easy and seamless installation. The spout is manufactured to fit 3/4 in.- and 1/2 in. threads, 1/2 in. copper slip and 1/2 in. thread in nose. For a sharp, tailored look in your bathroom choose Danco's Brushed Nickel Diverter Tub Spout. Order yours today! From the Manufacturer Danco is one of the largest plumbing repair, replacement and remodel suppliers in the home improvement industry.  We are largely focused on empowering Do It Yourself consumers with affordable plumbing products and solutions which create new and refreshing decors for bathrooms and kitchens.

From the Manufacturer

Danco is one of the largest plumbing repair, replacement and remodel suppliers in the home improvement industry.  We are largely focused on empowering Do It Yourself consumers with affordable plumbing products and solutions which create new and refreshing decors for bathrooms and kitchens.

• CLASSIC DESIGN –This classic design tub spout is designed to fit most stub-out pipe connections, including threaded and copper pipe slip fit
• CONNECTION SIZE: This diverter tub spout is compatible with 1/2 inch copper pipe slip-fit connections, 1/2 inch male threaded connections, 1/2 inch male pipe connection w/threaded end, and 3/4 inch male threaded connection
• ADAPTER & PLUMBER’S TAPE INCLUDED: This tub spout DIY installation kit comes with an adapter, O-ring, and plumber’s tape to ensure a snug, leak-free fit
• DIVERTER INCLUDED: This tub spout includes a front diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead - just pull up to divert the water upward and downward to keep the water flowing into the bathtub
• TUB SPOUT REACH: The bathtub faucet spout has a 5 inch reach
• BATHTUB SPOUT THREADED DIMENSIONS: The bathtub faucet spout metal threads measures 3-3/4 inch to threads from back of tub spout, so it is important to measure your stub out nipple to ensure it is at least 4 inch long
• BUILT TO LAST: The durable metal construction provides strength, longevity and endurance for the rigors of everyday use

User questions & answers

Question:	What is the physical measurement from the wall surface into the spout to the front of the threaded fitting? I need a unit that has 3-5/8" for my pipe
Answer:	will not work
Question:	There are no instructions in this package! Are they all like that
Answer:	Thank you for inquiring about a Danco product. Your tub spout with diverter package should of come with paper instructions. You can also go to Danco.com to view your product, click the "Installation and How To" tab, read step by step instructions or watch a video for install. If you prefer to speak to someone, you can call technical support at 800-523-5135 to help you through the install as well.
Question:	Is everything needed for the kit included
Answer:	yes- easy to install - make sure you use a rag or some kind of padding when turning the spicket on the pipe, don't want to mare the chrome surface and scratch it like i did, since it was in the kids bathroom it didn't matter. Works great
Question:	There is no 'slide adapter' in the packaging, but all of the instructions say to use it. anyone know what i'm doing wrong
Answer:	Thank you for inquiring about a Danco product. The Diverter Tub Spout in Chrome #88703 should come with a slide adapter (part A in your instructions) which slides onto the stub out. I would recommend taking the package you purchased back to your local hardware store to exchange for another. All together your Tub spout pack should come with a slide adapter, o-ring, slide extension nipple, slide retainer ring, screw, and new spout. This should be assembled in this order with your thread tape.

Product features

About Danco

Danco is one of the largest plumbing repair, replacement and remodel suppliers in the home improvement industry. We are largely focused on empowering Do It Yourself consumers with affordable plumbing products and solutions which create new and refreshing decors for bathrooms and kitchens.

Product description

SENTO - Better Home Better Life.

 

SENTO is a fine and reliable brand. The series collection is selected by SENTO is not only the high quality, but also the manufacturer selected standard.

We pay great attention to the recyclable, safety, quality and durability of our products. The most importantly, we only select "Environmental Friendly" manufacturer who is truly care about our environment. ONLY selected ISO 14001 certified manufacturer.

 

The universal diverter tub spout brings the most efficient method to your life - classic looking and easy installation.

The 5-3/8 in. length spout is front-mounted knob to divert water between spout and shower, Fits 1/2" Copper pipe slip-fit connection. 5-3/8 in. length reach FITS MOST SPOUT. Includes HEX wrench for quick and secure installation.

 

Installation

1/2" Copper Pipe installation

Manual – Easy installation manual is available to make your life easier.

Screw-mount installation: Concealed screws are invisible to make the whole series look even beautiful and neat.

 

Product Includes:

• 1 x Diverter Tub Spout
• 1 x Hex Wrench
• 1 x Installation Manual

 

Spec.

• Material: Zinc alloy with no regrind material.
• Mounting pack material: Steel material with high quality plating surface.
• Surface finish: Hand polished with high quality plating process passing with 24hrs salt spray testing.
• Installation: Screw-mounted.
• Color: Matte Black.
• ALL METAL CONSTRUCTION - Fabricated with HEAVY DUTY Die Cast Zinc, ensuring durability and longevity. ISO 9001 and ISO 14001 certified manufacturer. Therefore, this bath tub spout with diverter is the perfect solution to your water use issues.
• SURFACE FINISH - SENTO bathtub spout is hand polished with every detail. Hight quality plating process passing with 24hrs salt spray testing. The 4 inch tub spout with diverter was designed out of solid metal that is finished in beautiful Matte Black. This will allow the bathtub faucet to stand the test of time.
• EASY TO INSTALL - SENTO tub spout is super easy to install and can be fitted in just a few minutes. Only need a few household tools and you don't have to be a professional plumber to get the job done. It includes an installation kit and manual to help make the job easier.
• SEAMLESS CONNECTION - For any decorative style, our diverter tub spout concealed posts make the bathware looks more elegant and stylish.
• PRODUCT INCLUDES: This SENTO bathroom tub spout with diverter*1. This 1/2" copper pipe slip-fit tub spout fits most tubs, HEX wrench. The front pull up diverter allows water to flow upward to your shower head or downward into the bathtub for a desired shower or bath.

User questions & answers

Question:	The 0.64" outer diameter marked does not match the od of an 1/2" ips which is 0.84". in fact it does not match any ips size specification at all
Answer:	I’m not sure why you’re having problems with the thread matchup but my spout screwed on to my 1/2” ips pipe just fine. Swapping out the old spout with the new literally only took 5 minutes.
Question:	Is this meant for a stub with straight or tapered thread
Answer:	Mine was a straight 1/2” copper pipe and worked well and that’s what it’s meant for so if your pipe is 1/2” diameter as it comes out of the wall for at least an inch and a half it should work.
Question:	How long must the copper pipe coming out of the wall be for spout to fit properly. I cant find that info with the limited instructions provided
Answer:	It depends on if you are using the slip method or the threaded method. I used the threaded method and it seems that with the male fitting it would need to be around 3.5 inches. Mine was longer and the spout is away from the wall and I'll need to take it off and shorten the pipe.
Question:	You don't show it from the bottom or with the stem pulled up. Is it bronze ir silver
Answer:	Mine was bronze

Product features

EASY TO INSTALL

INSTRUCTIONS:

Step 1. Remove old spout by using a hex wrench, loosen set screw on bottom of slip-fit spout.

Step 2. Remove old spout by twisting and pull the spout out gently

so that you do not loosen any pipe connections inside of the wall.

Step 3. Twist the spout onto the pipe, pushing the spout against the finished wall. Positions spout then retighten setscrew. DO NOT OVERTIGHTEN.

Caution: Do not use sealant on spout with plastic threads.

Product description

PULSE ShowerSpas 3010-TS-BN Bathtub Spout Valve with Diverter, 1/2" NPT Connection, Brushed-Nickel. Compliments any retrofit showerhead and mixing valve trim. The perfect fit for new construction or remodel; replaces your existing spout in minutes. Conveniently located diverter on top of spout easily switches between tub spout and overhead shower. Timeless design completes the finished look of your new shower or bath. Specifications: Brushed Nickel finish; solid-brass construction for long-life; 5.5”length; 1/2” NPT connection. Durable ceramic disk cartridge provides years of service. Also available (sold separately) in Polished Chrome or Oil-Rubbed Bronze finishes. Manufacturer's limited lifetime warranty. PULSE ShowerSpas "Make Every Day Feel Like A Spa Day!"

• Replaces your existing tub spout valve in minutes
• Compliments any retrofit showerhead and mixing valve trim
• All brass construction for long-life
• Top mounted diverter quickly switches between tub spout and overhead shower
• 5.5" length with 1/2" NPT female connection
• Manufacturer's limited lifetime warranty

User questions & answers

Question:	How much of the 1/2 inch threaded pipe do you need sticking out of the wall
Answer:	4 inches
Question:	inch copper coming out of the wall in total or to the beginning of the threads from the wall
Answer:	4 inches from the wall including the threaded portion of the pipe.

Product description

This diverter tub spout from Westbrass features a front diverter knob and a 1/2 inch IPS connection. The Polished Chrome finish complements your existing fixtures. Its sleek and understated design blends seamlessly into any aesthetic.

From the Manufacturer

Westbrass was founded in 1935 by two brothers, Jack and Aaron Kagan, to serve the needs of all plumbing wholesalers on the West Coast. The product lines at the time included items such as faucets, valves, malleable fittings, etc. After becoming the premier distributor of plumbing products, the company was bought in 1985 by Max Homami. Seeing a boom in the Home Improvement Industry, Mr. Homami had a vision to make Westbrass the leader in Kitchen & Bath Accessories. The company currently manufactures its own products made of the highest quality materials. In order to ensure the excellence in the industry, these products are made to pass the highly stringent requirements of NSF, IAPMO, ADA and many other regulations. The Los Angeles-based company now sells a wide range of Plumbing Specialty Products, Bath Waste & Overflows, as well as Decorative Kitchen & Bath Accessories worldwide. Westbrass holds several patented items including the Deep Soak Overflow designed for extra-deep soaking in most bathing-wells, the Closing Linear overflow and several other intellectual properties. The customer base includes kitchen & bath showrooms, plumbing wholesalers and supply houses, OEM and ODM companies, as well as several national home centers.

• 5-1/4 in. reach fits most tubs
• Front connection with front-mounted knob to divert water between spout and shower
• Fits any 1/2 in. IPS thread-on connection - Note: This is designed for ½” Iron Pipe not ¾” Iron Pipe
• Dimensions: 5.25" x 3" x 3"
• Zinc construction provides sturdy functionality while promoting affordability
• NOTE: This is designed for 1/2 in. Iron pipe OR 3/4 in. Iron pipe nipples

User questions & answers

Question:	My connection pipe is inside of the wall , I need a front connection but my previous one has a pipe attached. Does this come with one
Answer:	No this is just the tub spout. no pipe is included. that will need to be supplied by your plumber. It will need to be long enough to go back into the wall and still have enough length to go down to the front of this spout connection
Question:	How can I find the matching hot and cold water focets
Answer:	i would contact westbrass themselves. their customer service was pretty helpful and very nice. the matte black hasnt become too popular yet. so if i cant find matte black ill get it in oil rubbed bronze then spray paint it a matte black. hope this helps.
Question:	My pipe from wall to end is 4 inches, its threaded at the end, will this fit
Answer:	Mine is also 4 inches; did you find out if this product will work or not?
Question:	The nipple extends 3-1/2 inches from finished wall will this work
Answer:	Did you ever find a spout that fit. I am having the same problem?? 3 1/2. 3/4 ips pipe. Can't find anything!!

Product features

Westbrass 5-1/4-Inch Front Diverter Tub Spout with Front Connection

• 5-1/4 in. reach fits most tubs
• Front connection with front-mounted knob to divert water between spout and shower
• Fits any 1/2 in. IPS thread-on connection
• Classic and versatile polished chrome finish
• Zinc construction provides sturdy functionality while promoting affordability

Available in a variety of Finishes

About Westbrass

Founded in 1935 Westbrass company currently manufactures its own products made of the highest quality materials. In order to ensure the excellence in the industry, these products are made to pass the highly stringent requirements of many regulations. The Los Angeles-based company now sells a wide range of Plumbing Specialty Products, Bath Waste & Overflows, as well as Decorative Kitchen & Bath Accessories worldwide. Westbrass holds several items including the Deep Soak Overflow designed for extra-deep soaking in most bathing-wells, the Closing Linear overflow and several other intellectual properties. The customer base includes kitchen & bath showrooms, plumbing wholesalers and supply houses, OEM and ODM companies, as well as several national home centers.

Product description

Timeless design for today's homes

From the Manufacturer

Timeless design for today's homes

• Chrome
• Rigorously tested to ensure quality performance
• See what Delta can do
• 5 1/4 Inches Diverter Tub Spout
• Timeless Design For Today's Homes

User questions & answers

Question:	Can I connect a garden hose to the diverted
Answer:	It reads total sound pressure level over the total audio frequency spectrum. There is no frequency filtering.
Question:	How far inset is the threads on the faucet? i have 1/2" ips horizontal from wall
Answer:	This device measures only the Sound Pressure Level. There is no frequency display, and it is basically uncalibrated. I think you would need something else.
Question:	is there a hot a cold handle or just one handle
Answer:	It's very good instrument. However I couldn't caliberate it with std. high profile equipment but as far as basic needs it can be trusted. I've been working on noise pollution of quarries in the Thane district. It was a great help to disqualify the claims quoted by entrepreneurs during my examination.
Question:	i have a existing spout with diverter which controls the overhead shower. I want to use this delta faucet such that both the shower head and handheld shower work. Will this product suit my requirement. pls clarify
Answer:	You can use REW Software which is free to download with an option to donate. Use with desktop or laptop. It's a very good program with quite a few preset options. Hope this helps you out.

Product features

Delta Faucet U1072-PK Diverter Tub Spout, Chrome

Product Features:

• 5 1/4" diverter tub spout
• Slip fit 1/2" CWT
• Threaded 1/2" or 3/4" IPS

Product description

The sculpted curves of this Foundations 5-3/8 in. Metal Pull-Up Diverter Tub Spout in Stainless bring a whimsical touch to the bath. It's also an essential component to a coordinated shower. As part of a company that delivers water every day through millions of faucets worldwide, Delta provides a lifetime limited warranty on all parts to the original consumer.

From the Manufacturer

Getting ready in the morning is far from routine when you're surrounded by a room and in the company of a faucet that reflects your personal style

• Brushed Nickel
• Genuine Delta repair part
• Plastic Collar Not Included. Slip on spout, fittings not included
• Tub spout only thread into 1/2 C.W.T or 1/2 IPS Nipple (thread not included)

User questions & answers

Question:	Where do i get the inner parts for this spout
Answer:	It was easier/cheaper to go this route....Danco 9D00089249 Universal Diverter Spout, Brushed Nickel. It has the " inner parts" and matches well with the Delta line.
Question:	Will this faucet work on the Delta 600 series
Answer:	Thank you for your question! This tub spout threads directly at the nose of the spout. The 600 Series models came with a spout that uses an adapter which sweats onto a 1/2" copper pipe or thread onto a 1/2" nipple (such as RP5834SS) or slip onto a 1/2" copper pipe (such as RP19820SS). Best regards, Jon
Question:	Does this spout have the tread tward front by diverter? I have pipe coming out of wall about 5 inches with a treaded end. Thanks
Answer:	I need to see a picture of the inside of this faucet
Question:	I just went to install mine and found it to have no innard parts or set screw. Is this how it should be
Answer:	I used the old innard parts with the set screw from my old spout. I had to file it down to get the set screw to line up properly with the spout. If you have a slip-on spout and can't reuse the old innards, you can get Delta RP64721, which includes the innards and is identical to this one, but is 7" long. The other option to get this spout to work with a bare slip on copper pipe would be to purchase Delta RP33794, which is a slip on to threaded converter.

Product features

About Us

The Delta brand lives by three tenets: water has the power to transform the way people feel every day, there can be magic in simple solutions and innovations flow from human insight. Inspired by our customers' needs, we've brought you technological magic with simple-solution innovations like Touch2O, MagnaTite Docking and H2Okinetic Technologies. We pair thoughtful features, like being able to turn on your kitchen faucet with a tap of your elbow, with breathtaking designs and product that's built to last a long.

We believe there are better ways to experience water

Through consumer-inspired innovations like In2ition Two-in-One Showers, which allow you to get water where you need it most using the integrated shower head and hand shower together or separately, we’re committed to making technology feel like magic that makes your busy life a little easier.

We Align Ourselves with Like-Minded Innovators

As the official faucet brand of the Southern Living Test kitchen in Birmingham, Alabama, you’ll find Delta Touch20 Technology in each of the four kitchen spaces. For nearly 50 years, we’ve partnered to bring you the very best in home inspiration and innovation.

Product description

Keeney’s universal fit bathtub spout with a diverter is the perfect accessory to create a cohesive bathroom. It fits 1/2-in. copper, 1/2-in. male threaded (front or rear), or 3/4-in. male threaded stub outs. The spout fits all most popular bathtub spout inlets and stub outs with adapters included. It has a classic polished chrome finish to match existing bathroom fixtures. You can install with confidence knowing Keeney stands by this product with a Limited .

• COMPATIBILITY: Fits 1/2 inch Copper 1/2 inch male threaded (front or rear) or 3/4 inch male threaded Stub outs
• INCLUDED: adapters
• FINISH: Chrome

User questions & answers

Question:	What is the length of it? I have about a 4" long 1/2" copper pipe stub unthreaded. Will it sit flush to the wall or do I have to modify the pipe
Answer:	I don't think you would have a problem. You may have to shorten the copper pipe a bit. I had to hook mine to a 3/4 galvanized. It came with everything I needed to install mine. Although mine was different I think it will work for you. I like mine it stops the water very well when showering.
Question:	Would that adapter piece fit a one inch on the wall to the 1/2 on tub spout
Answer:	I had to get a reducer for mine but it can be easy to install. You can easily make it work.
Question:	How many GPM
Answer:	I am not really sure exactly how much water this faucet will allow through it, however I can tell you that it is not a water saver faucet and that it can fill up my bathtub that has a totally open drain faster than the drain can suck the water down.
Question:	nipple threaded for 1/2 from wall. Current 5 1/2 spout has a 1/4 recessed fitting for the 1/2 pipe. Does this kit have what i need for my specs
Answer:	WellI can tell you that my husband and I took the faucet parts with us to Lowe’s home improvement store and do to whom ever before we bought our mobile home Mickey Mouse Job they Created the sizes and fittings that were installed to create a bathtub faucet were not any sort of actual true parts for the faucet. This kit is the only kit we were able to purchase that actually contained every item we needed to be able to install the correct items and make the faucet usable again.